drivers: usb: core: {file,hub,sysfs,usb}.c: Whitespace fixes

including:

- removing of trailing whitespace
- removing spaces before array indexing (foo [] to foo[])
- reindention of a switch-case block
- spaces to tabs

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Matthias Beyer 2013-10-10 23:41:27 +02:00 committed by Greg Kroah-Hartman
parent a91ccd26e7
commit 469271f8c4
4 changed files with 62 additions and 62 deletions

View File

@ -8,7 +8,7 @@
* (C) Copyright Deti Fliegl 1999 (new USB architecture)
* (C) Copyright Randy Dunlap 2000
* (C) Copyright David Brownell 2000-2001 (kernel hotplug, usb_device_id,
more docs, etc)
* more docs, etc)
* (C) Copyright Yggdrasil Computing, Inc. 2000
* (usb_device_id matching changes by Adam J. Richter)
* (C) Copyright Greg Kroah-Hartman 2002-2003
@ -44,7 +44,7 @@ static int usb_open(struct inode * inode, struct file * file)
file->f_op = new_fops;
/* Curiouser and curiouser... NULL ->open() as "no device" ? */
if (file->f_op->open)
err = file->f_op->open(inode,file);
err = file->f_op->open(inode, file);
if (err) {
fops_put(file->f_op);
file->f_op = fops_get(old_fops);
@ -166,7 +166,7 @@ int usb_register_dev(struct usb_interface *intf,
char *temp;
#ifdef CONFIG_USB_DYNAMIC_MINORS
/*
/*
* We don't care what the device tries to start at, we want to start
* at zero to pack the devices into the smallest available space with
* no holes in the minor range.

View File

@ -120,7 +120,7 @@ static inline char *portspeed(struct usb_hub *hub, int portstatus)
if (hub_is_superspeed(hub->hdev))
return "5.0 Gb/s";
if (portstatus & USB_PORT_STAT_HIGH_SPEED)
return "480 Mb/s";
return "480 Mb/s";
else if (portstatus & USB_PORT_STAT_LOW_SPEED)
return "1.5 Mb/s";
else
@ -862,7 +862,7 @@ static int hub_hub_status(struct usb_hub *hub,
"%s failed (err = %d)\n", __func__, ret);
} else {
*status = le16_to_cpu(hub->status->hub.wHubStatus);
*change = le16_to_cpu(hub->status->hub.wHubChange);
*change = le16_to_cpu(hub->status->hub.wHubChange);
ret = 0;
}
mutex_unlock(&hub->status_mutex);
@ -961,7 +961,7 @@ static void hub_port_logical_disconnect(struct usb_hub *hub, int port1)
*/
set_bit(port1, hub->change_bits);
kick_khubd(hub);
kick_khubd(hub);
}
/**
@ -1366,7 +1366,7 @@ static int hub_configure(struct usb_hub *hub,
if ((wHubCharacteristics & HUB_CHAR_COMPOUND) &&
!(hub_is_superspeed(hdev))) {
int i;
char portstr [USB_MAXCHILDREN + 1];
char portstr[USB_MAXCHILDREN + 1];
for (i = 0; i < hdev->maxchild; i++)
portstr[i] = hub->descriptor->u.hs.DeviceRemovable
@ -1434,32 +1434,32 @@ static int hub_configure(struct usb_hub *hub,
/* Note 8 FS bit times == (8 bits / 12000000 bps) ~= 666ns */
switch (wHubCharacteristics & HUB_CHAR_TTTT) {
case HUB_TTTT_8_BITS:
if (hdev->descriptor.bDeviceProtocol != 0) {
hub->tt.think_time = 666;
dev_dbg(hub_dev, "TT requires at most %d "
"FS bit times (%d ns)\n",
8, hub->tt.think_time);
}
break;
case HUB_TTTT_16_BITS:
hub->tt.think_time = 666 * 2;
case HUB_TTTT_8_BITS:
if (hdev->descriptor.bDeviceProtocol != 0) {
hub->tt.think_time = 666;
dev_dbg(hub_dev, "TT requires at most %d "
"FS bit times (%d ns)\n",
16, hub->tt.think_time);
break;
case HUB_TTTT_24_BITS:
hub->tt.think_time = 666 * 3;
dev_dbg(hub_dev, "TT requires at most %d "
"FS bit times (%d ns)\n",
24, hub->tt.think_time);
break;
case HUB_TTTT_32_BITS:
hub->tt.think_time = 666 * 4;
dev_dbg(hub_dev, "TT requires at most %d "
"FS bit times (%d ns)\n",
32, hub->tt.think_time);
break;
8, hub->tt.think_time);
}
break;
case HUB_TTTT_16_BITS:
hub->tt.think_time = 666 * 2;
dev_dbg(hub_dev, "TT requires at most %d "
"FS bit times (%d ns)\n",
16, hub->tt.think_time);
break;
case HUB_TTTT_24_BITS:
hub->tt.think_time = 666 * 3;
dev_dbg(hub_dev, "TT requires at most %d "
"FS bit times (%d ns)\n",
24, hub->tt.think_time);
break;
case HUB_TTTT_32_BITS:
hub->tt.think_time = 666 * 4;
dev_dbg(hub_dev, "TT requires at most %d "
"FS bit times (%d ns)\n",
32, hub->tt.think_time);
break;
}
/* probe() zeroes hub->indicator[] */
@ -1565,7 +1565,7 @@ static int hub_configure(struct usb_hub *hub,
/* maybe cycle the hub leds */
if (hub->has_indicators && blinkenlights)
hub->indicator [0] = INDICATOR_CYCLE;
hub->indicator[0] = INDICATOR_CYCLE;
for (i = 0; i < hdev->maxchild; i++) {
ret = usb_hub_create_port_device(hub, i + 1);
@ -1983,7 +1983,7 @@ static void choose_devnum(struct usb_device *udev)
if (devnum >= 128)
devnum = find_next_zero_bit(bus->devmap.devicemap,
128, 1);
bus->devnum_next = ( devnum >= 127 ? 1 : devnum + 1);
bus->devnum_next = (devnum >= 127 ? 1 : devnum + 1);
}
if (devnum < 128) {
set_bit(devnum, bus->devmap.devicemap);
@ -2237,8 +2237,7 @@ static int usb_enumerate_device(struct usb_device *udev)
udev->product = kstrdup("n/a (unauthorized)", GFP_KERNEL);
udev->manufacturer = kstrdup("n/a (unauthorized)", GFP_KERNEL);
udev->serial = kstrdup("n/a (unauthorized)", GFP_KERNEL);
}
else {
} else {
/* read the standard strings and cache them if present */
udev->product = usb_cache_string(udev, udev->descriptor.iProduct);
udev->manufacturer = usb_cache_string(udev,
@ -3113,8 +3112,8 @@ static int finish_port_resume(struct usb_device *udev)
retry_reset_resume:
status = usb_reset_and_verify_device(udev);
/* 10.5.4.5 says be sure devices in the tree are still there.
* For now let's assume the device didn't go crazy on resume,
/* 10.5.4.5 says be sure devices in the tree are still there.
* For now let's assume the device didn't go crazy on resume,
* and device drivers will know about any resume quirks.
*/
if (status == 0) {
@ -3860,7 +3859,7 @@ EXPORT_SYMBOL_GPL(usb_enable_ltm);
* Between connect detection and reset signaling there must be a delay
* of 100ms at least for debounce and power-settling. The corresponding
* timer shall restart whenever the downstream port detects a disconnect.
*
*
* Apparently there are some bluetooth and irda-dongles and a number of
* low-speed devices for which this debounce period may last over a second.
* Not covered by the spec - but easy to deal with.
@ -4060,7 +4059,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
udev->tt = &hub->tt;
udev->ttport = port1;
}
/* Why interleave GET_DESCRIPTOR and SET_ADDRESS this way?
* Because device hardware and firmware is sometimes buggy in
* this area, and this is how Linux has done it for ages.
@ -4135,11 +4134,11 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
#undef GET_DESCRIPTOR_BUFSIZE
}
/*
* If device is WUSB, we already assigned an
* unauthorized address in the Connect Ack sequence;
* authorization will assign the final address.
*/
/*
* If device is WUSB, we already assigned an
* unauthorized address in the Connect Ack sequence;
* authorization will assign the final address.
*/
if (udev->wusb == 0) {
for (j = 0; j < SET_ADDRESS_TRIES; ++j) {
retval = hub_set_address(udev, devnum);
@ -4168,7 +4167,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
msleep(10);
if (USE_NEW_SCHEME(retry_counter) && !(hcd->driver->flags & HCD_USB3))
break;
}
}
retval = usb_get_device_descriptor(udev, 8);
if (retval < 8) {
@ -4224,7 +4223,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
udev->ep0.desc.wMaxPacketSize = cpu_to_le16(i);
usb_ep0_reinit(udev);
}
retval = usb_get_device_descriptor(udev, USB_DT_DEVICE_SIZE);
if (retval < (signed)sizeof(udev->descriptor)) {
if (retval != -ENODEV)
@ -4321,7 +4320,7 @@ hub_power_remaining (struct usb_hub *hub)
}
if (remaining < 0) {
dev_warn(hub->intfdev, "%dmA over power budget!\n",
- remaining);
-remaining);
remaining = 0;
}
return remaining;
@ -4432,7 +4431,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
if (portstatus & USB_PORT_STAT_ENABLE)
goto done;
goto done;
return;
}
if (hub_is_superspeed(hub->hdev))
@ -4455,7 +4454,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
}
usb_set_device_state(udev, USB_STATE_POWERED);
udev->bus_mA = hub->mA_per_port;
udev->bus_mA = hub->mA_per_port;
udev->level = hdev->level + 1;
udev->wusb = hub_is_wusb(hub);
@ -4509,7 +4508,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
goto loop_disable;
}
}
/* check for devices running slower than they could */
if (le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0200
&& udev->speed == USB_SPEED_FULL
@ -4569,7 +4568,7 @@ loop:
dev_err(hub_dev, "unable to enumerate USB device on port %d\n",
port1);
}
done:
hub_port_disable(hub, port1, 1);
if (hcd->driver->relinquish_port && !hub->hdev->parent)
@ -4734,7 +4733,7 @@ static void hub_events(void)
* EM interference sometimes causes badly
* shielded USB devices to be shutdown by
* the hub, this hack enables them again.
* Works at least with mouse driver.
* Works at least with mouse driver.
*/
if (!(portstatus & USB_PORT_STAT_ENABLE)
&& !connect_change
@ -4846,7 +4845,7 @@ static void hub_events(void)
dev_dbg(hub_dev, "over-current change\n");
clear_hub_feature(hdev, C_HUB_OVER_CURRENT);
msleep(500); /* Cool down */
hub_power_on(hub, true);
hub_power_on(hub, true);
hub_hub_status(hub, &status, &unused);
if (status & HUB_STATUS_OVERCURRENT)
dev_err(hub_dev, "over-current "
@ -4866,7 +4865,7 @@ static void hub_events(void)
usb_unlock_device(hdev);
kref_put(&hub->kref, hub_release);
} /* end while (1) */
} /* end while (1) */
}
static int hub_thread(void *__unused)
@ -4891,7 +4890,7 @@ static int hub_thread(void *__unused)
static const struct usb_device_id hub_id_table[] = {
{ .match_flags = USB_DEVICE_ID_MATCH_VENDOR
| USB_DEVICE_ID_MATCH_INT_CLASS,
| USB_DEVICE_ID_MATCH_INT_CLASS,
.idVendor = USB_VENDOR_GENESYS_LOGIC,
.bInterfaceClass = USB_CLASS_HUB,
.driver_info = HUB_QUIRK_CHECK_PORT_AUTOSUSPEND},
@ -5125,13 +5124,13 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
if (ret < 0)
goto re_enumerate;
/* Device might have changed firmware (DFU or similar) */
if (descriptors_changed(udev, &descriptor, bos)) {
dev_info(&udev->dev, "device firmware changed\n");
udev->descriptor = descriptor; /* for disconnect() calls */
goto re_enumerate;
}
}
/* Restore the device's previous configuration */
if (!udev->actconfig)
@ -5156,7 +5155,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
udev->actconfig->desc.bConfigurationValue, ret);
mutex_unlock(hcd->bandwidth_mutex);
goto re_enumerate;
}
}
mutex_unlock(hcd->bandwidth_mutex);
usb_set_device_state(udev, USB_STATE_CONFIGURED);
@ -5203,7 +5202,7 @@ done:
usb_release_bos_descriptor(udev);
udev->bos = bos;
return 0;
re_enumerate:
/* LPM state doesn't matter when we're about to destroy the device. */
hub_port_logical_disconnect(parent_hub, port1);

View File

@ -398,7 +398,8 @@ static DEVICE_ATTR_RW(autosuspend);
static const char on_string[] = "on";
static const char auto_string[] = "auto";
static void warn_level(void) {
static void warn_level(void)
{
static int level_warned;
if (!level_warned) {
@ -652,7 +653,7 @@ static ssize_t authorized_store(struct device *dev,
result = usb_deauthorize_device(usb_dev);
else
result = usb_authorize_device(usb_dev);
return result < 0? result : size;
return result < 0 ? result : size;
}
static DEVICE_ATTR_IGNORE_LOCKDEP(authorized, S_IRUGO | S_IWUSR,
authorized_show, authorized_store);

View File

@ -497,7 +497,7 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,
dev->authorized = 1;
else {
dev->authorized = usb_hcd->authorized_default;
dev->wusb = usb_bus_is_wusb(bus)? 1 : 0;
dev->wusb = usb_bus_is_wusb(bus) ? 1 : 0;
}
return dev;
}