leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

USB: isp1760: Support board-specific hardware configurations

Browse Source 
This adds support for hardware configurations that don't match the
chip default register settings (e.g., 16-bit data bus, DACK and
DREQ pulled up instead of down, analog overcurrent mode).

These settings are passed in via the OF device tree.  The PCI
interface still assumes the same default values.

Signed-off-by: Nate Case <ncase@xes-inc.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Nate Case 2008-06-17 11:11:38 -05:00 committed by Greg Kroah-Hartman
parent 6d243e5c76
commit 3faefc88c1
3 changed files with 105 additions and 19 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

69
drivers/usb/host/isp1760-hcd.c
View File

@ -38,6 +38,7 @@ struct isp1760_hcd {
unsigned i_thresh;
unsigned long reset_done;
unsigned long next_statechange;
unsigned int devflags;
};
static inline struct isp1760_hcd *hcd_to_priv(struct usb_hcd *hcd)
@ -378,9 +379,31 @@ static int isp1760_hc_setup(struct usb_hcd *hcd)
{
struct isp1760_hcd *priv = hcd_to_priv(hcd);
int result;
u32 scratch;
u32 scratch, hwmode;
/* Setup HW Mode Control: This assumes a level active-low interrupt */
hwmode = HW_DATA_BUS_32BIT;
if (priv->devflags & ISP1760_FLAG_BUS_WIDTH_16)
hwmode &= ~HW_DATA_BUS_32BIT;
if (priv->devflags & ISP1760_FLAG_ANALOG_OC)
hwmode |= HW_ANA_DIGI_OC;
if (priv->devflags & ISP1760_FLAG_DACK_POL_HIGH)
hwmode |= HW_DACK_POL_HIGH;
if (priv->devflags & ISP1760_FLAG_DREQ_POL_HIGH)
hwmode |= HW_DREQ_POL_HIGH;
/*
* We have to set this first in case we're in 16-bit mode.
* Write it twice to ensure correct upper bits if switching
* to 16-bit mode.
*/
isp1760_writel(hwmode, hcd->regs + HC_HW_MODE_CTRL);
isp1760_writel(hwmode, hcd->regs + HC_HW_MODE_CTRL);
isp1760_writel(0xdeadbabe, hcd->regs + HC_SCRATCH_REG);
/* Change bus pattern */
scratch = isp1760_readl(hcd->regs + HC_CHIP_ID_REG);
scratch = isp1760_readl(hcd->regs + HC_SCRATCH_REG);
if (scratch != 0xdeadbabe) {
printk(KERN_ERR "ISP1760: Scratch test failed.\n");
@ -403,17 +426,29 @@ static int isp1760_hc_setup(struct usb_hcd *hcd)
/* Step 11 passed */
isp1760_info(priv, "bus width: %d, oc: %s\n",
(priv->devflags & ISP1760_FLAG_BUS_WIDTH_16) ?
16 : 32, (priv->devflags & ISP1760_FLAG_ANALOG_OC) ?
"analog" : "digital");
/* ATL reset */
isp1760_writel(hwmode | ALL_ATX_RESET, hcd->regs + HC_HW_MODE_CTRL);
mdelay(10);
isp1760_writel(hwmode, hcd->regs + HC_HW_MODE_CTRL);
isp1760_writel(INTERRUPT_ENABLE_MASK, hcd->regs + HC_INTERRUPT_REG);
isp1760_writel(INTERRUPT_ENABLE_MASK, hcd->regs + HC_INTERRUPT_ENABLE);
/* ATL reset */
scratch = isp1760_readl(hcd->regs + HC_HW_MODE_CTRL);
isp1760_writel(scratch | ALL_ATX_RESET, hcd->regs + HC_HW_MODE_CTRL);
mdelay(10);
isp1760_writel(scratch, hcd->regs + HC_HW_MODE_CTRL);
isp1760_writel(PORT1_POWER | PORT1_INIT2, hcd->regs + HC_PORT1_CTRL);
mdelay(10);
/*
* PORT 1 Control register of the ISP1760 is the OTG control
* register on ISP1761.
*/
if (!(priv->devflags & ISP1760_FLAG_ISP1761) &&
!(priv->devflags & ISP1760_FLAG_PORT1_DIS)) {
isp1760_writel(PORT1_POWER | PORT1_INIT2,
hcd->regs + HC_PORT1_CTRL);
mdelay(10);
}
priv->hcs_params = isp1760_readl(hcd->regs + HC_HCSPARAMS);
@ -453,8 +488,7 @@ static int isp1760_run(struct usb_hcd *hcd)
hcd->state = HC_STATE_RUNNING;
isp1760_enable_interrupts(hcd);
temp = isp1760_readl(hcd->regs + HC_HW_MODE_CTRL);
temp |= FINAL_HW_CONFIG;
isp1760_writel(temp, hcd->regs + HC_HW_MODE_CTRL);
isp1760_writel(temp | HW_GLOBAL_INTR_EN, hcd->regs + HC_HW_MODE_CTRL);
command = isp1760_readl(hcd->regs + HC_USBCMD);
command &= ~(CMD_LRESET|CMD_RESET);
@ -2112,6 +2146,7 @@ static int isp1760_get_frame(struct usb_hcd *hcd)
static void isp1760_stop(struct usb_hcd *hcd)
{
struct isp1760_hcd *priv = hcd_to_priv(hcd);
u32 temp;
isp1760_hub_control(hcd, ClearPortFeature, USB_PORT_FEAT_POWER, 1,
NULL, 0);
@ -2120,7 +2155,8 @@ static void isp1760_stop(struct usb_hcd *hcd)
spin_lock_irq(&priv->lock);
ehci_reset(priv);
/* Disable IRQ */
isp1760_writel(HW_DATA_BUS_32BIT, hcd->regs + HC_HW_MODE_CTRL);
temp = isp1760_readl(hcd->regs + HC_HW_MODE_CTRL);
isp1760_writel(temp &= ~HW_GLOBAL_INTR_EN, hcd->regs + HC_HW_MODE_CTRL);
spin_unlock_irq(&priv->lock);
isp1760_writel(0, hcd->regs + HC_CONFIGFLAG);
@ -2128,10 +2164,11 @@ static void isp1760_stop(struct usb_hcd *hcd)
static void isp1760_shutdown(struct usb_hcd *hcd)
{
u32 command;
u32 command, temp;
isp1760_stop(hcd);
isp1760_writel(HW_DATA_BUS_32BIT, hcd->regs + HC_HW_MODE_CTRL);
temp = isp1760_readl(hcd->regs + HC_HW_MODE_CTRL);
isp1760_writel(temp &= ~HW_GLOBAL_INTR_EN, hcd->regs + HC_HW_MODE_CTRL);
command = isp1760_readl(hcd->regs + HC_USBCMD);
command &= ~CMD_RUN;
@ -2183,7 +2220,8 @@ void deinit_kmem_cache(void)
}
struct usb_hcd *isp1760_register(u64 res_start, u64 res_len, int irq,
u64 irqflags, struct device *dev, const char *busname)
u64 irqflags, struct device *dev, const char *busname,
unsigned int devflags)
{
struct usb_hcd *hcd;
struct isp1760_hcd *priv;
@ -2200,6 +2238,7 @@ struct usb_hcd *isp1760_register(u64 res_start, u64 res_len, int irq,
return ERR_PTR(-ENOMEM);
priv = hcd_to_priv(hcd);
priv->devflags = devflags;
init_memory(priv);
hcd->regs = ioremap(res_start, res_len);
if (!hcd->regs) {

20
drivers/usb/host/isp1760-hcd.h
View File

@ -3,7 +3,8 @@
/* exports for if */
struct usb_hcd *isp1760_register(u64 res_start, u64 res_len, int irq,
u64 irqflags, struct device *dev, const char *busname);
u64 irqflags, struct device *dev, const char *busname,
unsigned int devflags);
int init_kmem_once(void);
void deinit_kmem_cache(void);
@ -31,6 +32,7 @@ void deinit_kmem_cache(void);
/* Configuration Register */
#define HC_HW_MODE_CTRL 0x300
#define ALL_ATX_RESET (1 << 31)
#define HW_ANA_DIGI_OC (1 << 15)
#define HW_DATA_BUS_32BIT (1 << 8)
#define HW_DACK_POL_HIGH (1 << 6)
#define HW_DREQ_POL_HIGH (1 << 5)
@ -56,13 +58,14 @@ void deinit_kmem_cache(void);
#define PORT1_POWER (3 << 3)
#define PORT1_INIT1 (1 << 7)
#define PORT1_INIT2 (1 << 23)
#define HW_OTG_CTRL_SET 0x374
#define HW_OTG_CTRL_CLR 0x376
/* Interrupt Register */
#define HC_INTERRUPT_REG 0x310
#define HC_INTERRUPT_ENABLE 0x314
#define INTERRUPT_ENABLE_MASK (HC_INTL_INT | HC_ATL_INT | HC_EOT_INT)
#define FINAL_HW_CONFIG (HW_GLOBAL_INTR_EN | HW_DATA_BUS_32BIT)
#define HC_ISO_INT (1 << 9)
#define HC_ATL_INT (1 << 8)
@ -122,6 +125,19 @@ typedef void (packet_enqueue)(struct usb_hcd *hcd, struct isp1760_qh *qh,
#define isp1760_err(priv, fmt, args...) \
dev_err(priv_to_hcd(priv)->self.controller, fmt, ##args)
/*
* Device flags that can vary from board to board. All of these
* indicate the most "atypical" case, so that a devflags of 0 is
* a sane default configuration.
*/
#define ISP1760_FLAG_PORT1_DIS 0x00000001 /* Port 1 disabled */
#define ISP1760_FLAG_BUS_WIDTH_16 0x00000002 /* 16-bit data bus width */
#define ISP1760_FLAG_OTG_EN 0x00000004 /* Port 1 supports OTG */
#define ISP1760_FLAG_ANALOG_OC 0x00000008 /* Analog overcurrent */
#define ISP1760_FLAG_DACK_POL_HIGH 0x00000010 /* DACK active high */
#define ISP1760_FLAG_DREQ_POL_HIGH 0x00000020 /* DREQ active high */
#define ISP1760_FLAG_ISP1761 0x00000040 /* Chip is ISP1761 */
/* chip memory management */
struct memory_chunk {
unsigned int start;

35
drivers/usb/host/isp1760-if.c
View File

@ -35,6 +35,8 @@ static int of_isp1760_probe(struct of_device *dev,
int virq;
u64 res_len;
int ret;
const unsigned int *prop;
unsigned int devflags = 0;
ret = of_address_to_resource(dp, 0, &memory);
if (ret)
@ -55,8 +57,32 @@ static int of_isp1760_probe(struct of_device *dev,
virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
oirq.size);
if (of_device_is_compatible(dp, "nxp,usb-isp1761"))
devflags |= ISP1760_FLAG_ISP1761;
if (of_get_property(dp, "port1-disable", NULL) != NULL)
devflags |= ISP1760_FLAG_PORT1_DIS;
/* Some systems wire up only 16 of the 32 data lines */
prop = of_get_property(dp, "bus-width", NULL);
if (prop && *prop == 16)
devflags |= ISP1760_FLAG_BUS_WIDTH_16;
if (of_get_property(dp, "port1-otg", NULL) != NULL)
devflags |= ISP1760_FLAG_OTG_EN;
if (of_get_property(dp, "analog-oc", NULL) != NULL)
devflags |= ISP1760_FLAG_ANALOG_OC;
if (of_get_property(dp, "dack-polarity", NULL) != NULL)
devflags |= ISP1760_FLAG_DACK_POL_HIGH;
if (of_get_property(dp, "dreq-polarity", NULL) != NULL)
devflags |= ISP1760_FLAG_DREQ_POL_HIGH;
hcd = isp1760_register(memory.start, res_len, virq,
IRQF_SHARED | IRQF_DISABLED, &dev->dev, dev_name(&dev->dev));
IRQF_SHARED | IRQF_DISABLED, &dev->dev, dev_name(&dev->dev),
devflags);
if (IS_ERR(hcd)) {
ret = PTR_ERR(hcd);
goto release_reg;
@ -87,6 +113,9 @@ static struct of_device_id of_isp1760_match[] = {
{
.compatible = "nxp,usb-isp1760",
},
{
.compatible = "nxp,usb-isp1761",
},
{ },
};
MODULE_DEVICE_TABLE(of, of_isp1760_match);
@ -116,6 +145,7 @@ static int __devinit isp1761_pci_probe(struct pci_dev *dev,
int length;
int status = 1;
struct usb_hcd *hcd;
unsigned int devflags = 0;
if (usb_disabled())
return -ENODEV;
@ -200,7 +230,8 @@ static int __devinit isp1761_pci_probe(struct pci_dev *dev,
dev->dev.dma_mask = NULL;
hcd = isp1760_register(pci_mem_phy0, length, dev->irq,
IRQF_SHARED | IRQF_DISABLED, &dev->dev, dev_name(&dev->dev));
IRQF_SHARED | IRQF_DISABLED, &dev->dev, dev_name(&dev->dev),
devflags);
pci_set_drvdata(dev, hcd);
if (!hcd)
return 0;