usb: misc: usb3503: Support operation with no I2C control
Refactor so that register writes for configuration are only performed if the device has a regmap provided and also register as a platform driver. This allows the driver to be used to manage GPIO based control of the device. Signed-off-by: Mark Brown <broonie@linaro.org> Cc: devicetree@vger.kernel.org Reviewed-by: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
parent
e5162d40b9
commit
3f0d1c67fa
@ -2,9 +2,10 @@ SMSC USB3503 High-Speed Hub Controller
|
||||
|
||||
Required properties:
|
||||
- compatible: Should be "smsc,usb3503" or "smsc,usb3503a".
|
||||
- reg: Specifies the i2c slave address, it should be 0x08.
|
||||
|
||||
Optional properties:
|
||||
- reg: Specifies the i2c slave address, it is required and should be 0x08
|
||||
if I2C is used.
|
||||
- connect-gpios: Should specify GPIO for connect.
|
||||
- disabled-ports: Should specify the ports unused.
|
||||
'1' or '2' or '3' are availe for this property to describe the port
|
||||
|
@ -78,22 +78,21 @@ static int usb3503_reset(struct usb3503 *hub, int state)
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode)
|
||||
static int usb3503_connect(struct usb3503 *hub)
|
||||
{
|
||||
struct device *dev = hub->dev;
|
||||
int err = 0;
|
||||
int err;
|
||||
|
||||
switch (mode) {
|
||||
case USB3503_MODE_HUB:
|
||||
usb3503_reset(hub, 1);
|
||||
usb3503_reset(hub, 1);
|
||||
|
||||
if (hub->regmap) {
|
||||
/* SP_ILOCK: set connect_n, config_n for config */
|
||||
err = regmap_write(hub->regmap, USB3503_SP_ILOCK,
|
||||
(USB3503_SPILOCK_CONNECT
|
||||
(USB3503_SPILOCK_CONNECT
|
||||
| USB3503_SPILOCK_CONFIG));
|
||||
if (err < 0) {
|
||||
dev_err(dev, "SP_ILOCK failed (%d)\n", err);
|
||||
goto err_hubmode;
|
||||
return err;
|
||||
}
|
||||
|
||||
/* PDS : Disable For Self Powered Operation */
|
||||
@ -103,7 +102,7 @@ static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode)
|
||||
hub->port_off_mask);
|
||||
if (err < 0) {
|
||||
dev_err(dev, "PDS failed (%d)\n", err);
|
||||
goto err_hubmode;
|
||||
return err;
|
||||
}
|
||||
}
|
||||
|
||||
@ -113,7 +112,7 @@ static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode)
|
||||
USB3503_SELF_BUS_PWR);
|
||||
if (err < 0) {
|
||||
dev_err(dev, "CFG1 failed (%d)\n", err);
|
||||
goto err_hubmode;
|
||||
return err;
|
||||
}
|
||||
|
||||
/* SP_LOCK: clear connect_n, config_n for hub connect */
|
||||
@ -122,14 +121,27 @@ static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode)
|
||||
| USB3503_SPILOCK_CONFIG), 0);
|
||||
if (err < 0) {
|
||||
dev_err(dev, "SP_ILOCK failed (%d)\n", err);
|
||||
goto err_hubmode;
|
||||
return err;
|
||||
}
|
||||
}
|
||||
|
||||
if (gpio_is_valid(hub->gpio_connect))
|
||||
gpio_set_value_cansleep(hub->gpio_connect, 1);
|
||||
if (gpio_is_valid(hub->gpio_connect))
|
||||
gpio_set_value_cansleep(hub->gpio_connect, 1);
|
||||
|
||||
hub->mode = mode;
|
||||
dev_info(dev, "switched to HUB mode\n");
|
||||
hub->mode = USB3503_MODE_HUB;
|
||||
dev_info(dev, "switched to HUB mode\n");
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode)
|
||||
{
|
||||
struct device *dev = hub->dev;
|
||||
int err = 0;
|
||||
|
||||
switch (mode) {
|
||||
case USB3503_MODE_HUB:
|
||||
err = usb3503_connect(hub);
|
||||
break;
|
||||
|
||||
case USB3503_MODE_STANDBY:
|
||||
@ -145,7 +157,6 @@ static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode)
|
||||
break;
|
||||
}
|
||||
|
||||
err_hubmode:
|
||||
return err;
|
||||
}
|
||||
|
||||
@ -198,6 +209,9 @@ static int usb3503_probe(struct usb3503 *hub)
|
||||
hub->mode = mode;
|
||||
}
|
||||
|
||||
if (hub->port_off_mask && !hub->regmap)
|
||||
dev_err(dev, "Ports disabled with no control interface\n");
|
||||
|
||||
if (gpio_is_valid(hub->gpio_intn)) {
|
||||
err = devm_gpio_request_one(dev, hub->gpio_intn,
|
||||
GPIOF_OUT_INIT_HIGH, "usb3503 intn");
|
||||
@ -263,6 +277,20 @@ static int usb3503_i2c_probe(struct i2c_client *i2c,
|
||||
return usb3503_probe(hub);
|
||||
}
|
||||
|
||||
static int usb3503_platform_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct usb3503 *hub;
|
||||
|
||||
hub = devm_kzalloc(&pdev->dev, sizeof(struct usb3503), GFP_KERNEL);
|
||||
if (!hub) {
|
||||
dev_err(&pdev->dev, "private data alloc fail\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
hub->dev = &pdev->dev;
|
||||
|
||||
return usb3503_probe(hub);
|
||||
}
|
||||
|
||||
static const struct i2c_device_id usb3503_id[] = {
|
||||
{ USB3503_I2C_NAME, 0 },
|
||||
{ }
|
||||
@ -278,7 +306,7 @@ static const struct of_device_id usb3503_of_match[] = {
|
||||
MODULE_DEVICE_TABLE(of, usb3503_of_match);
|
||||
#endif
|
||||
|
||||
static struct i2c_driver usb3503_driver = {
|
||||
static struct i2c_driver usb3503_i2c_driver = {
|
||||
.driver = {
|
||||
.name = USB3503_I2C_NAME,
|
||||
.of_match_table = of_match_ptr(usb3503_of_match),
|
||||
@ -287,7 +315,38 @@ static struct i2c_driver usb3503_driver = {
|
||||
.id_table = usb3503_id,
|
||||
};
|
||||
|
||||
module_i2c_driver(usb3503_driver);
|
||||
static struct platform_driver usb3503_platform_driver = {
|
||||
.driver = {
|
||||
.name = USB3503_I2C_NAME,
|
||||
.of_match_table = of_match_ptr(usb3503_of_match),
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
.probe = usb3503_platform_probe,
|
||||
};
|
||||
|
||||
static int __init usb3503_init(void)
|
||||
{
|
||||
int err;
|
||||
|
||||
err = i2c_register_driver(THIS_MODULE, &usb3503_i2c_driver);
|
||||
if (err != 0)
|
||||
pr_err("usb3503: Failed to register I2C driver: %d\n", err);
|
||||
|
||||
err = platform_driver_register(&usb3503_platform_driver);
|
||||
if (err != 0)
|
||||
pr_err("usb3503: Failed to register platform driver: %d\n",
|
||||
err);
|
||||
|
||||
return 0;
|
||||
}
|
||||
module_init(usb3503_init);
|
||||
|
||||
static void __exit usb3503_exit(void)
|
||||
{
|
||||
platform_driver_unregister(&usb3503_platform_driver);
|
||||
i2c_del_driver(&usb3503_i2c_driver);
|
||||
}
|
||||
module_exit(usb3503_exit);
|
||||
|
||||
MODULE_AUTHOR("Dongjin Kim <tobetter@gmail.com>");
|
||||
MODULE_DESCRIPTION("USB3503 USB HUB driver");
|
||||
|
Loading…
Reference in New Issue
Block a user