leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes

Browse Source 
After added inclination angle channels, the trigger buffer size is
insufficient. Extend the buffer size from 16 to 32 bytes, and change
the trigger buffer from the struct to a u8 array to adapt the sensor
with/without inclination angles output.
New trigger buffer data:
  - SCA3300: 3 accel channels, temp, and timestamp.
  - SCL3300: 3 accel channels, temp, 3 incli channels, and timestamp.
Readjustment the scan index to make it consistent with the buffer data.

Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
Link: https://lore.kernel.org/r/20220701023030.2527019-2-Qing-wu.Li@leica-geosystems.com.cn
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This commit is contained in:
LI Qingwu 2022-07-01 02:30:30 +00:00 committed by Jonathan Cameron
parent 5e1f918503
commit 3cfb0e1d39
1 changed files with 19 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

30
drivers/iio/accel/sca3300.c
View File

@ -52,12 +52,21 @@ enum sca3300_scan_indexes {
SCA3300_ACC_Y,
SCA3300_ACC_Z,
SCA3300_TEMP,
SCA3300_TIMESTAMP,
SCA3300_INCLI_X,
SCA3300_INCLI_Y,
SCA3300_INCLI_Z,
SCA3300_SCAN_MAX
};
/*
* Buffer size max case:
* Three accel channels, two bytes per channel.
* Temperature channel, two bytes.
* Three incli channels, two bytes per channel.
* Timestamp channel, eight bytes.
*/
#define SCA3300_MAX_BUFFER_SIZE (ALIGN(sizeof(s16) * SCA3300_SCAN_MAX, sizeof(s64)) + sizeof(s64))
#define SCA3300_ACCEL_CHANNEL(index, reg, axis) { \
.type = IIO_ACCEL, \
.address = reg, \
@ -140,10 +149,10 @@ static const struct iio_chan_spec scl3300_channels[] = {
SCA3300_ACCEL_CHANNEL(SCA3300_ACC_Y, 0x2, Y),
SCA3300_ACCEL_CHANNEL(SCA3300_ACC_Z, 0x3, Z),
SCA3300_TEMP_CHANNEL(SCA3300_TEMP, 0x05),
IIO_CHAN_SOFT_TIMESTAMP(4),
SCA3300_INCLI_CHANNEL(SCA3300_INCLI_X, 0x09, X),
SCA3300_INCLI_CHANNEL(SCA3300_INCLI_Y, 0x0A, Y),
SCA3300_INCLI_CHANNEL(SCA3300_INCLI_Z, 0x0B, Z),
IIO_CHAN_SOFT_TIMESTAMP(7),
};
static const unsigned long sca3300_scan_masks[] = {
@ -184,7 +193,9 @@ struct sca3300_chip_info {
* @spi: SPI device structure
* @lock: Data buffer lock
* @chip: Sensor chip specific information
* @scan: Triggered buffer. Four channel 16-bit data + 64-bit timestamp
* @buffer: Triggered buffer:
* -SCA3300: 4 channel 16-bit data + 64-bit timestamp
* -SCL3300: 7 channel 16-bit data + 64-bit timestamp
* @txbuf: Transmit buffer
* @rxbuf: Receive buffer
*/
@ -192,10 +203,7 @@ struct sca3300_data {
struct spi_device *spi;
struct mutex lock;
const struct sca3300_chip_info *chip;
struct {
s16 channels[4];
s64 ts __aligned(sizeof(s64));
} scan;
u8 buffer[SCA3300_MAX_BUFFER_SIZE] __aligned(sizeof(s64));
u8 txbuf[4] __aligned(IIO_DMA_MINALIGN);
u8 rxbuf[4];
};
@ -484,21 +492,21 @@ static irqreturn_t sca3300_trigger_handler(int irq, void *p)
struct iio_dev *indio_dev = pf->indio_dev;
struct sca3300_data *data = iio_priv(indio_dev);
int bit, ret, val, i = 0;
s16 *channels = (s16 *)data->buffer;
for_each_set_bit(bit, indio_dev->active_scan_mask,
indio_dev->masklength) {
ret = sca3300_read_reg(data, sca3300_channels[bit].address,
&val);
ret = sca3300_read_reg(data, indio_dev->channels[bit].address, &val);
if (ret) {
dev_err_ratelimited(&data->spi->dev,
"failed to read register, error: %d\n", ret);
/* handled, but bailing out due to errors */
goto out;
}
data->scan.channels[i++] = val;
channels[i++] = val;
}
iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
iio_get_time_ns(indio_dev));
out:
iio_trigger_notify_done(indio_dev->trig);