forked from Minki/linux
drivers/leds/leds-pca9532.c: add gpio capability
Allow unused leds on pca9532 to be used as gpio. The board I am working on now has no less than 6 pca9532 chips. One chips is used for only leds, one has 14 leds and 2 gpio and the rest of the chips are gpio only. There is also one board in mainline which could use this capabilty; arch/arm/mach-iop32x/n2100.c 232 { .type = PCA9532_TYPE_NONE }, /* power OFF gpio */ 233 { .type = PCA9532_TYPE_NONE }, /* reset gpio */ This patch defines a new pin type, PCA9532_TYPE_GPIO, and registers a gpiochip if any pin has this type set. The gpio will registers all chip pins but will filter on gpio_request. [randy.dunlap@oracle.com: fix build when GPIOLIB is not enabled] Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Jan Weitzel <j.weitzel@phytec.de> Cc: Juergen Kilb <j.kilb@phytec.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
parent
fff26f8141
commit
3c1ab50d0a
@ -162,6 +162,16 @@ config LEDS_PCA9532
|
||||
LED controller. It is generally only useful
|
||||
as a platform driver
|
||||
|
||||
config LEDS_PCA9532_GPIO
|
||||
bool "Enable GPIO support for PCA9532"
|
||||
depends on LEDS_PCA9532
|
||||
depends on GPIOLIB
|
||||
help
|
||||
Allow unused pins on PCA9532 to be used as gpio.
|
||||
|
||||
To use a pin as gpio pca9532_type in pca9532_platform data needs to
|
||||
set to PCA9532_TYPE_GPIO.
|
||||
|
||||
config LEDS_GPIO
|
||||
tristate "LED Support for GPIO connected LEDs"
|
||||
depends on LEDS_CLASS
|
||||
|
@ -19,7 +19,9 @@
|
||||
#include <linux/mutex.h>
|
||||
#include <linux/workqueue.h>
|
||||
#include <linux/leds-pca9532.h>
|
||||
#include <linux/gpio.h>
|
||||
|
||||
#define PCA9532_REG_INPUT(i) ((i)/8)
|
||||
#define PCA9532_REG_PSC(i) (0x2+(i)*2)
|
||||
#define PCA9532_REG_PWM(i) (0x3+(i)*2)
|
||||
#define PCA9532_REG_LS0 0x6
|
||||
@ -34,6 +36,9 @@ struct pca9532_data {
|
||||
struct mutex update_lock;
|
||||
struct input_dev *idev;
|
||||
struct work_struct work;
|
||||
#ifdef CONFIG_LEDS_PCA9532_GPIO
|
||||
struct gpio_chip gpio;
|
||||
#endif
|
||||
u8 pwm[2];
|
||||
u8 psc[2];
|
||||
};
|
||||
@ -200,16 +205,68 @@ static void pca9532_led_work(struct work_struct *work)
|
||||
pca9532_setled(led);
|
||||
}
|
||||
|
||||
static void pca9532_destroy_devices(struct pca9532_data *data, int n_devs)
|
||||
#ifdef CONFIG_LEDS_PCA9532_GPIO
|
||||
static int pca9532_gpio_request_pin(struct gpio_chip *gc, unsigned offset)
|
||||
{
|
||||
struct pca9532_data *data = container_of(gc, struct pca9532_data, gpio);
|
||||
struct pca9532_led *led = &data->leds[offset];
|
||||
|
||||
if (led->type == PCA9532_TYPE_GPIO)
|
||||
return 0;
|
||||
|
||||
return -EBUSY;
|
||||
}
|
||||
|
||||
static void pca9532_gpio_set_value(struct gpio_chip *gc, unsigned offset, int val)
|
||||
{
|
||||
struct pca9532_data *data = container_of(gc, struct pca9532_data, gpio);
|
||||
struct pca9532_led *led = &data->leds[offset];
|
||||
|
||||
if (val)
|
||||
led->state = PCA9532_ON;
|
||||
else
|
||||
led->state = PCA9532_OFF;
|
||||
|
||||
pca9532_setled(led);
|
||||
}
|
||||
|
||||
static int pca9532_gpio_get_value(struct gpio_chip *gc, unsigned offset)
|
||||
{
|
||||
struct pca9532_data *data = container_of(gc, struct pca9532_data, gpio);
|
||||
unsigned char reg;
|
||||
|
||||
reg = i2c_smbus_read_byte_data(data->client, PCA9532_REG_INPUT(offset));
|
||||
|
||||
return !!(reg & (1 << (offset % 8)));
|
||||
}
|
||||
|
||||
static int pca9532_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
|
||||
{
|
||||
/* To use as input ensure pin is not driven */
|
||||
pca9532_gpio_set_value(gc, offset, 0);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int pca9532_gpio_direction_output(struct gpio_chip *gc, unsigned offset, int val)
|
||||
{
|
||||
pca9532_gpio_set_value(gc, offset, val);
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif /* CONFIG_LEDS_PCA9532_GPIO */
|
||||
|
||||
static int pca9532_destroy_devices(struct pca9532_data *data, int n_devs)
|
||||
{
|
||||
int i = n_devs;
|
||||
|
||||
if (!data)
|
||||
return;
|
||||
return -EINVAL;
|
||||
|
||||
while (--i >= 0) {
|
||||
switch (data->leds[i].type) {
|
||||
case PCA9532_TYPE_NONE:
|
||||
case PCA9532_TYPE_GPIO:
|
||||
break;
|
||||
case PCA9532_TYPE_LED:
|
||||
led_classdev_unregister(&data->leds[i].ldev);
|
||||
@ -224,12 +281,26 @@ static void pca9532_destroy_devices(struct pca9532_data *data, int n_devs)
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
#ifdef CONFIG_LEDS_PCA9532_GPIO
|
||||
if (data->gpio.dev) {
|
||||
int err = gpiochip_remove(&data->gpio);
|
||||
if (err) {
|
||||
dev_err(&data->client->dev, "%s failed, %d\n",
|
||||
"gpiochip_remove()", err);
|
||||
return err;
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int pca9532_configure(struct i2c_client *client,
|
||||
struct pca9532_data *data, struct pca9532_platform_data *pdata)
|
||||
{
|
||||
int i, err = 0;
|
||||
int gpios = 0;
|
||||
|
||||
for (i = 0; i < 2; i++) {
|
||||
data->pwm[i] = pdata->pwm[i];
|
||||
@ -249,6 +320,9 @@ static int pca9532_configure(struct i2c_client *client,
|
||||
switch (led->type) {
|
||||
case PCA9532_TYPE_NONE:
|
||||
break;
|
||||
case PCA9532_TYPE_GPIO:
|
||||
gpios++;
|
||||
break;
|
||||
case PCA9532_TYPE_LED:
|
||||
led->state = pled->state;
|
||||
led->name = pled->name;
|
||||
@ -297,6 +371,34 @@ static int pca9532_configure(struct i2c_client *client,
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
#ifdef CONFIG_LEDS_PCA9532_GPIO
|
||||
if (gpios) {
|
||||
data->gpio.label = "gpio-pca9532";
|
||||
data->gpio.direction_input = pca9532_gpio_direction_input;
|
||||
data->gpio.direction_output = pca9532_gpio_direction_output;
|
||||
data->gpio.set = pca9532_gpio_set_value;
|
||||
data->gpio.get = pca9532_gpio_get_value;
|
||||
data->gpio.request = pca9532_gpio_request_pin;
|
||||
data->gpio.can_sleep = 1;
|
||||
data->gpio.base = pdata->gpio_base;
|
||||
data->gpio.ngpio = 16;
|
||||
data->gpio.dev = &client->dev;
|
||||
data->gpio.owner = THIS_MODULE;
|
||||
|
||||
err = gpiochip_add(&data->gpio);
|
||||
if (err) {
|
||||
/* Use data->gpio.dev as a flag for freeing gpiochip */
|
||||
data->gpio.dev = NULL;
|
||||
dev_warn(&client->dev, "could not add gpiochip\n");
|
||||
} else {
|
||||
dev_info(&client->dev, "gpios %i...%i\n",
|
||||
data->gpio.base, data->gpio.base +
|
||||
data->gpio.ngpio - 1);
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
return 0;
|
||||
|
||||
exit:
|
||||
@ -337,7 +439,12 @@ static int pca9532_probe(struct i2c_client *client,
|
||||
static int pca9532_remove(struct i2c_client *client)
|
||||
{
|
||||
struct pca9532_data *data = i2c_get_clientdata(client);
|
||||
pca9532_destroy_devices(data, 16);
|
||||
int err;
|
||||
|
||||
err = pca9532_destroy_devices(data, 16);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
kfree(data);
|
||||
return 0;
|
||||
}
|
||||
|
@ -25,7 +25,7 @@ enum pca9532_state {
|
||||
};
|
||||
|
||||
enum pca9532_type { PCA9532_TYPE_NONE, PCA9532_TYPE_LED,
|
||||
PCA9532_TYPE_N2100_BEEP };
|
||||
PCA9532_TYPE_N2100_BEEP, PCA9532_TYPE_GPIO };
|
||||
|
||||
struct pca9532_led {
|
||||
u8 id;
|
||||
@ -41,6 +41,7 @@ struct pca9532_platform_data {
|
||||
struct pca9532_led leds[16];
|
||||
u8 pwm[2];
|
||||
u8 psc[2];
|
||||
int gpio_base;
|
||||
};
|
||||
|
||||
#endif /* __LINUX_PCA9532_H */
|
||||
|
Loading…
Reference in New Issue
Block a user