forked from Minki/linux
netxen: fix ipv6 offload and tx cleanup
o fix the ip/tcp hdr offset in tx descriptors for ipv6. o cleanup xmit function, move the tso checks into separate function, this reduces unnecessary endian conversions back and forth. o optimize macros to initialize tx descriptors. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
2edbb45442
commit
391587c344
@ -308,27 +308,16 @@ struct netxen_ring_ctx {
|
||||
#define netxen_set_cmd_desc_ctxid(cmd_desc, var) \
|
||||
((cmd_desc)->port_ctxid |= ((var) << 4 & 0xF0))
|
||||
|
||||
#define netxen_set_cmd_desc_flags(cmd_desc, val) \
|
||||
(cmd_desc)->flags_opcode = ((cmd_desc)->flags_opcode & \
|
||||
~cpu_to_le16(0x7f)) | cpu_to_le16((val) & 0x7f)
|
||||
#define netxen_set_cmd_desc_opcode(cmd_desc, val) \
|
||||
(cmd_desc)->flags_opcode = ((cmd_desc)->flags_opcode & \
|
||||
~cpu_to_le16((u16)0x3f << 7)) | cpu_to_le16(((val) & 0x3f) << 7)
|
||||
#define netxen_set_tx_port(_desc, _port) \
|
||||
(_desc)->port_ctxid = ((_port) & 0xf) | (((_port) << 4) & 0xf0)
|
||||
|
||||
#define netxen_set_cmd_desc_num_of_buff(cmd_desc, val) \
|
||||
(cmd_desc)->num_of_buffers_total_length = \
|
||||
((cmd_desc)->num_of_buffers_total_length & \
|
||||
~cpu_to_le32(0xff)) | cpu_to_le32((val) & 0xff)
|
||||
#define netxen_set_cmd_desc_totallength(cmd_desc, val) \
|
||||
(cmd_desc)->num_of_buffers_total_length = \
|
||||
((cmd_desc)->num_of_buffers_total_length & \
|
||||
~cpu_to_le32((u32)0xffffff << 8)) | \
|
||||
cpu_to_le32(((val) & 0xffffff) << 8)
|
||||
#define netxen_set_tx_flags_opcode(_desc, _flags, _opcode) \
|
||||
(_desc)->flags_opcode = \
|
||||
cpu_to_le16(((_flags) & 0x7f) | (((_opcode) & 0x3f) << 7))
|
||||
|
||||
#define netxen_get_cmd_desc_opcode(cmd_desc) \
|
||||
((le16_to_cpu((cmd_desc)->flags_opcode) >> 7) & 0x003f)
|
||||
#define netxen_get_cmd_desc_totallength(cmd_desc) \
|
||||
((le32_to_cpu((cmd_desc)->num_of_buffers_total_length) >> 8) & 0xffffff)
|
||||
#define netxen_set_tx_frags_len(_desc, _frags, _len) \
|
||||
(_desc)->num_of_buffers_total_length = \
|
||||
cpu_to_le32(((_frags) & 0xff) | (((_len) & 0xffffff) << 8))
|
||||
|
||||
struct cmd_desc_type0 {
|
||||
u8 tcp_hdr_offset; /* For LSO only */
|
||||
@ -757,7 +746,7 @@ extern char netxen_nic_driver_name[];
|
||||
*/
|
||||
struct netxen_skb_frag {
|
||||
u64 dma;
|
||||
u32 length;
|
||||
ulong length;
|
||||
};
|
||||
|
||||
#define _netxen_set_bits(config_word, start, bits, val) {\
|
||||
@ -783,13 +772,7 @@ struct netxen_skb_frag {
|
||||
struct netxen_cmd_buffer {
|
||||
struct sk_buff *skb;
|
||||
struct netxen_skb_frag frag_array[MAX_BUFFERS_PER_CMD + 1];
|
||||
u32 total_length;
|
||||
u32 mss;
|
||||
u16 port;
|
||||
u8 cmd;
|
||||
u8 frag_count;
|
||||
unsigned long time_stamp;
|
||||
u32 state;
|
||||
u32 frag_count;
|
||||
};
|
||||
|
||||
/* In rx_buffer, we do not need multiple fragments as is a single buffer */
|
||||
@ -1486,8 +1469,6 @@ void netxen_release_tx_buffers(struct netxen_adapter *adapter);
|
||||
|
||||
void netxen_initialize_adapter_ops(struct netxen_adapter *adapter);
|
||||
int netxen_init_firmware(struct netxen_adapter *adapter);
|
||||
void netxen_tso_check(struct netxen_adapter *adapter,
|
||||
struct cmd_desc_type0 *desc, struct sk_buff *skb);
|
||||
void netxen_nic_clear_stats(struct netxen_adapter *adapter);
|
||||
void netxen_watchdog_task(struct work_struct *work);
|
||||
void netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ctx,
|
||||
|
@ -508,12 +508,8 @@ netxen_send_cmd_descs(struct netxen_adapter *adapter,
|
||||
cmd_desc = &cmd_desc_arr[i];
|
||||
|
||||
pbuf = &adapter->cmd_buf_arr[producer];
|
||||
pbuf->mss = 0;
|
||||
pbuf->total_length = 0;
|
||||
pbuf->skb = NULL;
|
||||
pbuf->cmd = 0;
|
||||
pbuf->frag_count = 0;
|
||||
pbuf->port = 0;
|
||||
|
||||
/* adapter->ahw.cmd_desc_head[producer] = *cmd_desc; */
|
||||
memcpy(&adapter->ahw.cmd_desc_head[producer],
|
||||
|
@ -39,6 +39,7 @@
|
||||
#include "netxen_nic_phan_reg.h"
|
||||
|
||||
#include <linux/dma-mapping.h>
|
||||
#include <linux/if_vlan.h>
|
||||
#include <net/ip.h>
|
||||
|
||||
MODULE_DESCRIPTION("NetXen Multi port (1/10) Gigabit Network Driver");
|
||||
@ -1137,29 +1138,46 @@ static int netxen_nic_close(struct net_device *netdev)
|
||||
return 0;
|
||||
}
|
||||
|
||||
void netxen_tso_check(struct netxen_adapter *adapter,
|
||||
static bool netxen_tso_check(struct net_device *netdev,
|
||||
struct cmd_desc_type0 *desc, struct sk_buff *skb)
|
||||
{
|
||||
if (desc->mss) {
|
||||
desc->total_hdr_length = (sizeof(struct ethhdr) +
|
||||
ip_hdrlen(skb) + tcp_hdrlen(skb));
|
||||
bool tso = false;
|
||||
u8 opcode = TX_ETHER_PKT;
|
||||
|
||||
if ((NX_IS_REVISION_P3(adapter->ahw.revision_id)) &&
|
||||
(skb->protocol == htons(ETH_P_IPV6)))
|
||||
netxen_set_cmd_desc_opcode(desc, TX_TCP_LSO6);
|
||||
else
|
||||
netxen_set_cmd_desc_opcode(desc, TX_TCP_LSO);
|
||||
if ((netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)) &&
|
||||
skb_shinfo(skb)->gso_size > 0) {
|
||||
|
||||
desc->mss = cpu_to_le16(skb_shinfo(skb)->gso_size);
|
||||
desc->total_hdr_length =
|
||||
skb_transport_offset(skb) + tcp_hdrlen(skb);
|
||||
|
||||
opcode = (skb->protocol == htons(ETH_P_IPV6)) ?
|
||||
TX_TCP_LSO6 : TX_TCP_LSO;
|
||||
tso = true;
|
||||
|
||||
} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
|
||||
if (ip_hdr(skb)->protocol == IPPROTO_TCP)
|
||||
netxen_set_cmd_desc_opcode(desc, TX_TCP_PKT);
|
||||
else if (ip_hdr(skb)->protocol == IPPROTO_UDP)
|
||||
netxen_set_cmd_desc_opcode(desc, TX_UDP_PKT);
|
||||
else
|
||||
return;
|
||||
u8 l4proto;
|
||||
|
||||
if (skb->protocol == htons(ETH_P_IP)) {
|
||||
l4proto = ip_hdr(skb)->protocol;
|
||||
|
||||
if (l4proto == IPPROTO_TCP)
|
||||
opcode = TX_TCP_PKT;
|
||||
else if(l4proto == IPPROTO_UDP)
|
||||
opcode = TX_UDP_PKT;
|
||||
} else if (skb->protocol == htons(ETH_P_IPV6)) {
|
||||
l4proto = ipv6_hdr(skb)->nexthdr;
|
||||
|
||||
if (l4proto == IPPROTO_TCP)
|
||||
opcode = TX_TCPV6_PKT;
|
||||
else if(l4proto == IPPROTO_UDP)
|
||||
opcode = TX_UDPV6_PKT;
|
||||
}
|
||||
}
|
||||
desc->tcp_hdr_offset = skb_transport_offset(skb);
|
||||
desc->ip_hdr_offset = skb_network_offset(skb);
|
||||
netxen_set_tx_flags_opcode(desc, 0, opcode);
|
||||
return tso;
|
||||
}
|
||||
|
||||
static int netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
|
||||
@ -1167,33 +1185,20 @@ static int netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
|
||||
struct netxen_adapter *adapter = netdev_priv(netdev);
|
||||
struct netxen_hardware_context *hw = &adapter->ahw;
|
||||
unsigned int first_seg_len = skb->len - skb->data_len;
|
||||
struct netxen_cmd_buffer *pbuf;
|
||||
struct netxen_skb_frag *buffrag;
|
||||
unsigned int i;
|
||||
struct cmd_desc_type0 *hwdesc;
|
||||
int i, k;
|
||||
|
||||
u32 producer, consumer;
|
||||
u32 saved_producer = 0;
|
||||
struct cmd_desc_type0 *hwdesc;
|
||||
int k;
|
||||
struct netxen_cmd_buffer *pbuf = NULL;
|
||||
int frag_count;
|
||||
int no_of_desc;
|
||||
int frag_count, no_of_desc;
|
||||
u32 num_txd = adapter->max_tx_desc_count;
|
||||
bool is_tso = false;
|
||||
|
||||
frag_count = skb_shinfo(skb)->nr_frags + 1;
|
||||
|
||||
/* There 4 fragments per descriptor */
|
||||
no_of_desc = (frag_count + 3) >> 2;
|
||||
if (netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)) {
|
||||
if (skb_shinfo(skb)->gso_size > 0) {
|
||||
|
||||
no_of_desc++;
|
||||
if ((ip_hdrlen(skb) + tcp_hdrlen(skb) +
|
||||
sizeof(struct ethhdr)) >
|
||||
(sizeof(struct cmd_desc_type0) - 2)) {
|
||||
no_of_desc++;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
producer = adapter->cmd_producer;
|
||||
smp_mb();
|
||||
@ -1205,34 +1210,22 @@ static int netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
|
||||
}
|
||||
|
||||
/* Copy the descriptors into the hardware */
|
||||
saved_producer = producer;
|
||||
hwdesc = &hw->cmd_desc_head[producer];
|
||||
memset(hwdesc, 0, sizeof(struct cmd_desc_type0));
|
||||
/* Take skb->data itself */
|
||||
pbuf = &adapter->cmd_buf_arr[producer];
|
||||
if ((netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)) &&
|
||||
skb_shinfo(skb)->gso_size > 0) {
|
||||
pbuf->mss = skb_shinfo(skb)->gso_size;
|
||||
hwdesc->mss = cpu_to_le16(skb_shinfo(skb)->gso_size);
|
||||
} else {
|
||||
pbuf->mss = 0;
|
||||
hwdesc->mss = 0;
|
||||
}
|
||||
pbuf->total_length = skb->len;
|
||||
|
||||
is_tso = netxen_tso_check(netdev, hwdesc, skb);
|
||||
|
||||
pbuf->skb = skb;
|
||||
pbuf->cmd = TX_ETHER_PKT;
|
||||
pbuf->frag_count = frag_count;
|
||||
pbuf->port = adapter->portnum;
|
||||
buffrag = &pbuf->frag_array[0];
|
||||
buffrag->dma = pci_map_single(adapter->pdev, skb->data, first_seg_len,
|
||||
PCI_DMA_TODEVICE);
|
||||
buffrag->length = first_seg_len;
|
||||
netxen_set_cmd_desc_totallength(hwdesc, skb->len);
|
||||
netxen_set_cmd_desc_num_of_buff(hwdesc, frag_count);
|
||||
netxen_set_cmd_desc_opcode(hwdesc, TX_ETHER_PKT);
|
||||
netxen_set_tx_frags_len(hwdesc, frag_count, skb->len);
|
||||
netxen_set_tx_port(hwdesc, adapter->portnum);
|
||||
|
||||
netxen_set_cmd_desc_port(hwdesc, adapter->portnum);
|
||||
netxen_set_cmd_desc_ctxid(hwdesc, adapter->portnum);
|
||||
hwdesc->buffer1_length = cpu_to_le16(first_seg_len);
|
||||
hwdesc->addr_buffer1 = cpu_to_le64(buffrag->dma);
|
||||
|
||||
@ -1285,16 +1278,12 @@ static int netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
|
||||
}
|
||||
producer = get_next_index(producer, num_txd);
|
||||
|
||||
/* might change opcode to TX_TCP_LSO */
|
||||
netxen_tso_check(adapter, &hw->cmd_desc_head[saved_producer], skb);
|
||||
|
||||
/* For LSO, we need to copy the MAC/IP/TCP headers into
|
||||
* the descriptor ring
|
||||
*/
|
||||
if (netxen_get_cmd_desc_opcode(&hw->cmd_desc_head[saved_producer])
|
||||
== TX_TCP_LSO) {
|
||||
if (is_tso) {
|
||||
int hdr_len, first_hdr_len, more_hdr;
|
||||
hdr_len = hw->cmd_desc_head[saved_producer].total_hdr_length;
|
||||
hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
|
||||
if (hdr_len > (sizeof(struct cmd_desc_type0) - 2)) {
|
||||
first_hdr_len = sizeof(struct cmd_desc_type0) - 2;
|
||||
more_hdr = 1;
|
||||
|
Loading…
Reference in New Issue
Block a user