forked from Minki/linux
[libata] Delete pata_it8172 driver
This MIPS platform is going away. Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
This commit is contained in:
Jeff Garzik
parent
9359085988
commit
36b35a5be0
@ -288,15 +288,6 @@ config PATA_ISAPNP
|
|||||||
|
|
||||||
If unsure, say N.
|
If unsure, say N.
|
||||||
|
|
||||||
config PATA_IT8172
|
|
||||||
tristate "IT8172 PATA support (Very Experimental)"
|
|
||||||
depends on PCI && EXPERIMENTAL
|
|
||||||
help
|
|
||||||
This option enables support for the ITE 8172 PATA controller
|
|
||||||
via the new ATA layer.
|
|
||||||
|
|
||||||
If unsure, say N.
|
|
||||||
|
|
||||||
config PATA_IT821X
|
config PATA_IT821X
|
||||||
tristate "IT821x PATA support (Experimental)"
|
tristate "IT821x PATA support (Experimental)"
|
||||||
depends on PCI && EXPERIMENTAL
|
depends on PCI && EXPERIMENTAL
|
||||||
|
|||||||
@ -32,7 +32,6 @@ obj-$(CONFIG_PATA_HPT37X) += pata_hpt37x.o
|
|||||||
obj-$(CONFIG_PATA_HPT3X2N) += pata_hpt3x2n.o
|
obj-$(CONFIG_PATA_HPT3X2N) += pata_hpt3x2n.o
|
||||||
obj-$(CONFIG_PATA_HPT3X3) += pata_hpt3x3.o
|
obj-$(CONFIG_PATA_HPT3X3) += pata_hpt3x3.o
|
||||||
obj-$(CONFIG_PATA_ISAPNP) += pata_isapnp.o
|
obj-$(CONFIG_PATA_ISAPNP) += pata_isapnp.o
|
||||||
obj-$(CONFIG_PATA_IT8172) += pata_it8172.o
|
|
||||||
obj-$(CONFIG_PATA_IT821X) += pata_it821x.o
|
obj-$(CONFIG_PATA_IT821X) += pata_it821x.o
|
||||||
obj-$(CONFIG_PATA_JMICRON) += pata_jmicron.o
|
obj-$(CONFIG_PATA_JMICRON) += pata_jmicron.o
|
||||||
obj-$(CONFIG_PATA_NETCELL) += pata_netcell.o
|
obj-$(CONFIG_PATA_NETCELL) += pata_netcell.o
|
||||||
|
|||||||
@ -1,288 +0,0 @@
|
|||||||
/*
|
|
||||||
* pata_it8172.c - IT8172 PATA for new ATA layer
|
|
||||||
* (C) 2005 Red Hat Inc
|
|
||||||
* Alan Cox <alan@redhat.com>
|
|
||||||
*
|
|
||||||
* Based heavily on
|
|
||||||
*
|
|
||||||
* BRIEF MODULE DESCRIPTION
|
|
||||||
* IT8172 IDE controller support
|
|
||||||
*
|
|
||||||
* Copyright 2000 MontaVista Software Inc.
|
|
||||||
* Author: MontaVista Software, Inc.
|
|
||||||
* stevel@mvista.com or source@mvista.com
|
|
||||||
*
|
|
||||||
* This program is free software; you can redistribute it and/or modify it
|
|
||||||
* under the terms of the GNU General Public License as published by the
|
|
||||||
* Free Software Foundation; either version 2 of the License, or (at your
|
|
||||||
* option) any later version.
|
|
||||||
*
|
|
||||||
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
|
||||||
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
||||||
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
|
|
||||||
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
||||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
||||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
|
||||||
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
|
||||||
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
||||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
||||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
||||||
*
|
|
||||||
* You should have received a copy of the GNU General Public License along
|
|
||||||
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
||||||
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
||||||
*
|
|
||||||
* TODO
|
|
||||||
* Check for errata
|
|
||||||
* See if we really need to force native mode
|
|
||||||
* PIO timings (also lacking in original)
|
|
||||||
*/
|
|
||||||
|
|
||||||
#include <linux/kernel.h>
|
|
||||||
#include <linux/module.h>
|
|
||||||
#include <linux/pci.h>
|
|
||||||
#include <linux/init.h>
|
|
||||||
#include <linux/blkdev.h>
|
|
||||||
#include <linux/delay.h>
|
|
||||||
#include <scsi/scsi_host.h>
|
|
||||||
#include <linux/libata.h>
|
|
||||||
|
|
||||||
#define DRV_NAME "pata_it8172"
|
|
||||||
#define DRV_VERSION "0.3.1"
|
|
||||||
|
|
||||||
static int it8172_pre_reset(struct ata_port *ap)
|
|
||||||
{
|
|
||||||
static const struct pci_bits it8172_enable_bits[] = {
|
|
||||||
{ 0x00, 0, 0x00, 0x00 },
|
|
||||||
{ 0x40, 1, 0x00, 0x01 }
|
|
||||||
};
|
|
||||||
|
|
||||||
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
||||||
|
|
||||||
if (ap->port_no && !pci_test_config_bits(pdev, &it8172_enable_bits[ap->port_no])) {
|
|
||||||
ata_port_disable(ap);
|
|
||||||
printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
ap->cbl = ATA_CBL_PATA40;
|
|
||||||
return ata_std_prereset(ap);
|
|
||||||
}
|
|
||||||
|
|
||||||
static void it8172_error_handler(struct ata_port *ap)
|
|
||||||
{
|
|
||||||
ata_bmdma_drive_eh(ap, it8172_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* it8172_set_pio_timing - set initial PIO mode data
|
|
||||||
* @ap: ATA interface
|
|
||||||
* @adev: ATA device
|
|
||||||
*
|
|
||||||
* Called by both the pio and dma setup functions to set the controller
|
|
||||||
* timings for PIO transfers. We must load both the mode number and
|
|
||||||
* timing values into the controller.
|
|
||||||
*/
|
|
||||||
|
|
||||||
static void it8172_set_pio_timing(struct ata_port *ap, struct ata_device *adev, int pio)
|
|
||||||
{
|
|
||||||
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
||||||
u16 reg40;
|
|
||||||
|
|
||||||
pci_read_config_word(pdev, 0x40, ®40);
|
|
||||||
|
|
||||||
/*
|
|
||||||
* FIX! The DIOR/DIOW pulse width and recovery times in port 0x44
|
|
||||||
* are being left at the default values of 8 PCI clocks (242 nsec
|
|
||||||
* for a 33 MHz clock). These can be safely shortened at higher
|
|
||||||
* PIO modes. The DIOR/DIOW pulse width and recovery times only
|
|
||||||
* apply to PIO modes, not to the DMA modes.
|
|
||||||
*/
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Enable port 0x44. The IT8172G spec is confused; it calls
|
|
||||||
* this register the "Slave IDE Timing Register", but in fact,
|
|
||||||
* it controls timing for both master and slave drives.
|
|
||||||
*/
|
|
||||||
|
|
||||||
reg40 |= 0x4000;
|
|
||||||
if (adev->devno) {
|
|
||||||
reg40 &= 0xC006;
|
|
||||||
if (pio > 1)
|
|
||||||
/* Enable prefetch and IORDY sample-point */
|
|
||||||
reg40 |= 0x0060;
|
|
||||||
} else {
|
|
||||||
reg40 &= 0xC060;
|
|
||||||
if (pio > 1)
|
|
||||||
/* Enable prefetch and IORDY sample-point */
|
|
||||||
reg40 |= 0x0006;
|
|
||||||
}
|
|
||||||
/* Write back the enables */
|
|
||||||
pci_write_config_word(pdev, 0x40, reg40);
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* it8172_set_piomode - set initial PIO mode data
|
|
||||||
* @ap: ATA interface
|
|
||||||
* @adev: ATA device
|
|
||||||
*
|
|
||||||
* Called to do the PIO mode setup. We use a shared helper for this
|
|
||||||
* as the DMA setup must also adjust the PIO timing information.
|
|
||||||
*/
|
|
||||||
|
|
||||||
static void it8172_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
|
||||||
{
|
|
||||||
it8172_set_pio_timing(ap, adev, adev->pio_mode - XFER_PIO_0);
|
|
||||||
}
|
|
||||||
|
|
||||||
/**
|
|
||||||
* it8172_set_dmamode - set initial DMA mode data
|
|
||||||
* @ap: ATA interface
|
|
||||||
* @adev: ATA device
|
|
||||||
*
|
|
||||||
* Called to do the DMA mode setup. We must tune an appropriate PIO
|
|
||||||
* mode to match.
|
|
||||||
*/
|
|
||||||
|
|
||||||
static void it8172_set_dmamode(struct ata_port *ap, struct ata_device *adev)
|
|
||||||
{
|
|
||||||
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
||||||
int dn = (2 * ap->port_no) + adev->devno;
|
|
||||||
u8 reg48, reg4a;
|
|
||||||
int pio;
|
|
||||||
|
|
||||||
static const int pio_map[] = { 1, 3, 4};
|
|
||||||
/*
|
|
||||||
* Setting the DMA cycle time to 2 or 3 PCI clocks (60 and 91 nsec
|
|
||||||
* at 33 MHz PCI clock) seems to cause BadCRC errors during DMA
|
|
||||||
* transfers on some drives, even though both numbers meet the minimum
|
|
||||||
* ATAPI-4 spec of 73 and 54 nsec for UDMA 1 and 2 respectively.
|
|
||||||
* So the faster times are just commented out here. The good news is
|
|
||||||
* that the slower cycle time has very little affect on transfer
|
|
||||||
* performance.
|
|
||||||
*/
|
|
||||||
|
|
||||||
pci_read_config_byte(pdev, 0x48, ®48);
|
|
||||||
pci_read_config_byte(pdev, 0x4A, ®4a);
|
|
||||||
|
|
||||||
reg4a &= ~(3 << (4 * dn));
|
|
||||||
|
|
||||||
if (adev->dma_mode >= XFER_UDMA_0) {
|
|
||||||
reg48 |= 1 << dn;
|
|
||||||
#ifdef UDMA_TIMING_SET
|
|
||||||
reg4a |= ((adev->dma_mode - XFER_UDMA_0) << (4 * dn));
|
|
||||||
#endif
|
|
||||||
pio = 4;
|
|
||||||
} else {
|
|
||||||
pio = pio_map[adev->dma_mode - XFER_MW_DMA_0];
|
|
||||||
reg48 &= ~ (1 << dn);
|
|
||||||
}
|
|
||||||
pci_write_config_byte(pdev, 0x48, reg48);
|
|
||||||
pci_write_config_byte(pdev, 0x4A, reg4a);
|
|
||||||
it8172_set_pio_timing(ap, adev, pio);
|
|
||||||
|
|
||||||
}
|
|
||||||
|
|
||||||
static struct scsi_host_template it8172_sht = {
|
|
||||||
.module = THIS_MODULE,
|
|
||||||
.name = DRV_NAME,
|
|
||||||
.ioctl = ata_scsi_ioctl,
|
|
||||||
.queuecommand = ata_scsi_queuecmd,
|
|
||||||
.can_queue = ATA_DEF_QUEUE,
|
|
||||||
.this_id = ATA_SHT_THIS_ID,
|
|
||||||
.sg_tablesize = LIBATA_MAX_PRD,
|
|
||||||
.max_sectors = ATA_MAX_SECTORS,
|
|
||||||
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
||||||
.emulated = ATA_SHT_EMULATED,
|
|
||||||
.use_clustering = ATA_SHT_USE_CLUSTERING,
|
|
||||||
.proc_name = DRV_NAME,
|
|
||||||
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
||||||
.slave_configure = ata_scsi_slave_config,
|
|
||||||
.bios_param = ata_std_bios_param,
|
|
||||||
};
|
|
||||||
|
|
||||||
static struct ata_port_operations it8172_port_ops = {
|
|
||||||
.port_disable = ata_port_disable,
|
|
||||||
.set_piomode = it8172_set_piomode,
|
|
||||||
.set_dmamode = it8172_set_dmamode,
|
|
||||||
.mode_filter = ata_pci_default_filter,
|
|
||||||
|
|
||||||
.tf_load = ata_tf_load,
|
|
||||||
.tf_read = ata_tf_read,
|
|
||||||
.check_status = ata_check_status,
|
|
||||||
.exec_command = ata_exec_command,
|
|
||||||
.dev_select = ata_std_dev_select,
|
|
||||||
|
|
||||||
.freeze = ata_bmdma_freeze,
|
|
||||||
.thaw = ata_bmdma_thaw,
|
|
||||||
.error_handler = it8172_error_handler,
|
|
||||||
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
|
||||||
|
|
||||||
.bmdma_setup = ata_bmdma_setup,
|
|
||||||
.bmdma_start = ata_bmdma_start,
|
|
||||||
.bmdma_stop = ata_bmdma_stop,
|
|
||||||
.bmdma_status = ata_bmdma_status,
|
|
||||||
|
|
||||||
.qc_prep = ata_qc_prep,
|
|
||||||
.qc_issue = ata_qc_issue_prot,
|
|
||||||
.eng_timeout = ata_eng_timeout,
|
|
||||||
.data_xfer = ata_pio_data_xfer,
|
|
||||||
|
|
||||||
.irq_handler = ata_interrupt,
|
|
||||||
.irq_clear = ata_bmdma_irq_clear,
|
|
||||||
|
|
||||||
.port_start = ata_port_start,
|
|
||||||
.port_stop = ata_port_stop,
|
|
||||||
.host_stop = ata_host_stop
|
|
||||||
};
|
|
||||||
|
|
||||||
static int it8172_init_one(struct pci_dev *dev, const struct pci_device_id *id)
|
|
||||||
{
|
|
||||||
static struct ata_port_info info = {
|
|
||||||
.sht = &it8172_sht,
|
|
||||||
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
|
|
||||||
.pio_mask = 0x1f,
|
|
||||||
.mwdma_mask = 0x06, /* No MWDMA0 support */
|
|
||||||
.udma_mask = 0x7,
|
|
||||||
.port_ops = &it8172_port_ops
|
|
||||||
};
|
|
||||||
static struct ata_port_info *port_info[2] = { &info, &info };
|
|
||||||
|
|
||||||
if ((!(PCI_FUNC(dev->devfn) & 1) ||
|
|
||||||
(!((dev->class >> 8) == PCI_CLASS_STORAGE_IDE))))
|
|
||||||
return -ENODEV; /* IT8172 is more than an IDE controller */
|
|
||||||
|
|
||||||
return ata_pci_init_one(dev, port_info, 2);
|
|
||||||
}
|
|
||||||
|
|
||||||
static struct pci_device_id it8172[] = {
|
|
||||||
{ PCI_DEVICE(PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_IT8172G), },
|
|
||||||
{ 0, },
|
|
||||||
};
|
|
||||||
|
|
||||||
static struct pci_driver it8172_pci_driver = {
|
|
||||||
.name = DRV_NAME,
|
|
||||||
.id_table = it8172,
|
|
||||||
.probe = it8172_init_one,
|
|
||||||
.remove = ata_pci_remove_one
|
|
||||||
};
|
|
||||||
|
|
||||||
static int __init it8172_init(void)
|
|
||||||
{
|
|
||||||
return pci_register_driver(&it8172_pci_driver);
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
static void __exit it8172_exit(void)
|
|
||||||
{
|
|
||||||
pci_unregister_driver(&it8172_pci_driver);
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
MODULE_AUTHOR("Alan Cox");
|
|
||||||
MODULE_DESCRIPTION("low-level driver for ITE IT8172");
|
|
||||||
MODULE_LICENSE("GPL");
|
|
||||||
MODULE_DEVICE_TABLE(pci, it8172);
|
|
||||||
MODULE_VERSION(DRV_VERSION);
|
|
||||||
|
|
||||||
module_init(it8172_init);
|
|
||||||
module_exit(it8172_exit);
|
|
||||||
Loading…
Reference in New Issue
Block a user