From 34cabc2a58c2f4ad7fe78c0b54685772d7e68420 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Sun, 24 Jan 2016 00:36:39 +0200 Subject: [PATCH] ARM: dts: kirkwood: fix audio for OpenRD clients Fix audio on kirkwood-openrd-client: 1) The audio-controller was left disabled. 2) The probe fails because cs42l51 is missing #sound-dai-cells. /sound/simple-audio-card,codec: could not get #sound-dai-cells for /ocp@f1000000/i2c@11000/cs42l51@4a asoc-simple-card sound: parse error -22 asoc-simple-card: probe of sound failed with error -22 3) The mapping is incorrect: asoc-simple-card sound: cs42l51-hifi <-> spdif mapping ok should be: asoc-simple-card sound: cs42l51-hifi <-> i2s mapping ok Reported-by: Rick Thomas Signed-off-by: Aaro Koskinen Reviewed-by: Andrew Lunn Tested-by: Rick Thomas Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/kirkwood-openrd-client.dts | 6 +++++- arch/arm/boot/dts/kirkwood.dtsi | 2 +- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/kirkwood-openrd-client.dts b/arch/arm/boot/dts/kirkwood-openrd-client.dts index 887b9c1fee43..96ff59d68f44 100644 --- a/arch/arm/boot/dts/kirkwood-openrd-client.dts +++ b/arch/arm/boot/dts/kirkwood-openrd-client.dts @@ -20,6 +20,9 @@ compatible = "marvell,openrd-client", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood"; ocp@f1000000 { + audio-controller@a0000 { + status = "okay"; + }; i2c@11000 { status = "okay"; clock-frequency = <400000>; @@ -27,6 +30,7 @@ cs42l51: cs42l51@4a { compatible = "cirrus,cs42l51"; reg = <0x4a>; + #sound-dai-cells = <0>; }; }; }; @@ -37,7 +41,7 @@ simple-audio-card,mclk-fs = <256>; simple-audio-card,cpu { - sound-dai = <&audio0>; + sound-dai = <&audio0 0>; }; simple-audio-card,codec { diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 7b5a4a18f49c..7445a15e259d 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -381,7 +381,7 @@ audio0: audio-controller@a0000 { compatible = "marvell,kirkwood-audio"; - #sound-dai-cells = <0>; + #sound-dai-cells = <1>; reg = <0xa0000 0x2210>; interrupts = <24>; clocks = <&gate_clk 9>;