gpio: tegra: Parameterize the number of banks

Tegra20's GPIO controller has 7 banks, and Tegra30's controller has 8
banks. Allow the number of banks to be configured at run-time by the
device tree.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Stephen Warren 2012-01-19 08:16:35 +00:00 committed by Olof Johansson
parent 6f74dc9bc8
commit 3391811c42
2 changed files with 38 additions and 12 deletions

View File

@ -1,9 +1,11 @@
NVIDIA Tegra 2 GPIO controller
NVIDIA Tegra GPIO controller
Required properties:
- compatible : "nvidia,tegra20-gpio"
- compatible : "nvidia,tegra<chip>-gpio"
- reg : Physical base address and length of the controller's registers.
- interrupts : The interrupt outputs from the controller.
- interrupts : The interrupt outputs from the controller. For Tegra20,
there should be 7 interrupts specified, and for Tegra30, there should
be 8 interrupts specified.
- #gpio-cells : Should be two. The first cell is the pin number and the
second cell is used to specify optional parameters:
- bit 0 specifies polarity (0 for normal, 1 for inverted)

View File

@ -77,7 +77,8 @@ struct tegra_gpio_bank {
static struct irq_domain irq_domain;
static void __iomem *regs;
static struct tegra_gpio_bank tegra_gpio_banks[7];
static u32 tegra_gpio_bank_count;
static struct tegra_gpio_bank *tegra_gpio_banks;
static inline void tegra_gpio_writel(u32 val, u32 reg)
{
@ -274,7 +275,7 @@ void tegra_gpio_resume(void)
local_irq_save(flags);
for (b = 0; b < ARRAY_SIZE(tegra_gpio_banks); b++) {
for (b = 0; b < tegra_gpio_bank_count; b++) {
struct tegra_gpio_bank *bank = &tegra_gpio_banks[b];
for (p = 0; p < ARRAY_SIZE(bank->oe); p++) {
@ -297,7 +298,7 @@ void tegra_gpio_suspend(void)
int p;
local_irq_save(flags);
for (b = 0; b < ARRAY_SIZE(tegra_gpio_banks); b++) {
for (b = 0; b < tegra_gpio_bank_count; b++) {
struct tegra_gpio_bank *bank = &tegra_gpio_banks[b];
for (p = 0; p < ARRAY_SIZE(bank->oe); p++) {
@ -338,23 +339,46 @@ static struct lock_class_key gpio_lock_class;
static int __devinit tegra_gpio_probe(struct platform_device *pdev)
{
int irq_base;
struct resource *res;
struct tegra_gpio_bank *bank;
int gpio;
int i;
int j;
irq_domain.irq_base = irq_alloc_descs(-1, 0, TEGRA_NR_GPIOS, 0);
if (irq_domain.irq_base < 0) {
for (;;) {
res = platform_get_resource(pdev, IORESOURCE_IRQ, tegra_gpio_bank_count);
if (!res)
break;
tegra_gpio_bank_count++;
}
if (!tegra_gpio_bank_count) {
dev_err(&pdev->dev, "Missing IRQ resource\n");
return -ENODEV;
}
tegra_gpio_chip.ngpio = tegra_gpio_bank_count * 32;
tegra_gpio_banks = devm_kzalloc(&pdev->dev,
tegra_gpio_bank_count * sizeof(*tegra_gpio_banks),
GFP_KERNEL);
if (!tegra_gpio_banks) {
dev_err(&pdev->dev, "Couldn't allocate bank structure\n");
return -ENODEV;
}
irq_base = irq_alloc_descs(-1, 0, tegra_gpio_chip.ngpio, 0);
if (irq_base < 0) {
dev_err(&pdev->dev, "Couldn't allocate IRQ numbers\n");
return -ENODEV;
}
irq_domain.nr_irq = TEGRA_NR_GPIOS;
irq_domain.irq_base = irq_base;
irq_domain.nr_irq = tegra_gpio_chip.ngpio;
irq_domain.ops = &irq_domain_simple_ops;
irq_domain.of_node = pdev->dev.of_node;
irq_domain_add(&irq_domain);
for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) {
for (i = 0; i < tegra_gpio_bank_count; i++) {
res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
if (!res) {
dev_err(&pdev->dev, "Missing IRQ resource\n");
@ -391,7 +415,7 @@ static int __devinit tegra_gpio_probe(struct platform_device *pdev)
gpiochip_add(&tegra_gpio_chip);
for (gpio = 0; gpio < TEGRA_NR_GPIOS; gpio++) {
for (gpio = 0; gpio < tegra_gpio_chip.ngpio; gpio++) {
int irq = irq_domain_to_irq(&irq_domain, gpio);
/* No validity check; all Tegra GPIOs are valid IRQs */
@ -404,7 +428,7 @@ static int __devinit tegra_gpio_probe(struct platform_device *pdev)
set_irq_flags(irq, IRQF_VALID);
}
for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) {
for (i = 0; i < tegra_gpio_bank_count; i++) {
bank = &tegra_gpio_banks[i];
irq_set_chained_handler(bank->irq, tegra_gpio_irq_handler);