forked from Minki/linux
regulator: act8865: add PMIC act8865 driver
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
This commit is contained in:
Wenyou Yang
Mark Brown
parent
6ce4eac1f6
commit
33036f48d1
@ -70,6 +70,14 @@ config REGULATOR_88PM8607
|
||||
help
|
||||
This driver supports 88PM8607 voltage regulator chips.
|
||||
|
||||
config REGULATOR_ACT8865
|
||||
tristate "Active-semi act8865 voltage regulator"
|
||||
depends on I2C
|
||||
select REGMAP_I2C
|
||||
help
|
||||
This driver controls a active-semi act8865 voltage output
|
||||
regulator via I2C bus.
|
||||
|
||||
config REGULATOR_AD5398
|
||||
tristate "Analog Devices AD5398/AD5821 regulators"
|
||||
depends on I2C
|
||||
|
||||
@ -14,6 +14,7 @@ obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
|
||||
obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
|
||||
obj-$(CONFIG_REGULATOR_AB8500) += ab8500-ext.o ab8500.o
|
||||
obj-$(CONFIG_REGULATOR_ACT8865) += act8865-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
|
||||
obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o
|
||||
|
||||
368
drivers/regulator/act8865-regulator.c
Normal file
368
drivers/regulator/act8865-regulator.c
Normal file
@ -0,0 +1,368 @@
|
||||
/*
|
||||
* act8865-regulator.c - Voltage regulation for the active-semi ACT8865
|
||||
* http://www.active-semi.com/sheets/ACT8865_Datasheet.pdf
|
||||
*
|
||||
* Copyright (C) 2013 Atmel Corporation
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/regulator/driver.h>
|
||||
#include <linux/regulator/act8865.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/regulator/of_regulator.h>
|
||||
#include <linux/regmap.h>
|
||||
|
||||
/*
|
||||
* ACT8865 Global Register Map.
|
||||
*/
|
||||
#define ACT8865_SYS_MODE 0x00
|
||||
#define ACT8865_SYS_CTRL 0x01
|
||||
#define ACT8865_DCDC1_VSET1 0x20
|
||||
#define ACT8865_DCDC1_VSET2 0x21
|
||||
#define ACT8865_DCDC1_CTRL 0x22
|
||||
#define ACT8865_DCDC2_VSET1 0x30
|
||||
#define ACT8865_DCDC2_VSET2 0x31
|
||||
#define ACT8865_DCDC2_CTRL 0x32
|
||||
#define ACT8865_DCDC3_VSET1 0x40
|
||||
#define ACT8865_DCDC3_VSET2 0x41
|
||||
#define ACT8865_DCDC3_CTRL 0x42
|
||||
#define ACT8865_LDO1_VSET 0x50
|
||||
#define ACT8865_LDO1_CTRL 0x51
|
||||
#define ACT8865_LDO2_VSET 0x54
|
||||
#define ACT8865_LDO2_CTRL 0x55
|
||||
#define ACT8865_LDO3_VSET 0x60
|
||||
#define ACT8865_LDO3_CTRL 0x61
|
||||
#define ACT8865_LDO4_VSET 0x64
|
||||
#define ACT8865_LDO4_CTRL 0x65
|
||||
|
||||
/*
|
||||
* Field Definitions.
|
||||
*/
|
||||
#define ACT8865_ENA 0x80 /* ON - [7] */
|
||||
#define ACT8865_VSEL_MASK 0x3F /* VSET - [5:0] */
|
||||
|
||||
/*
|
||||
* ACT8865 voltage number
|
||||
*/
|
||||
#define ACT8865_VOLTAGE_NUM 64
|
||||
|
||||
struct act8865 {
|
||||
struct regulator_dev *rdev[ACT8865_REG_NUM];
|
||||
struct regmap *regmap;
|
||||
};
|
||||
|
||||
static const struct regmap_config act8865_regmap_config = {
|
||||
.reg_bits = 8,
|
||||
.val_bits = 8,
|
||||
};
|
||||
|
||||
static const struct regulator_linear_range act8865_volatge_ranges[] = {
|
||||
REGULATOR_LINEAR_RANGE(600000, 0, 23, 25000),
|
||||
REGULATOR_LINEAR_RANGE(1200000, 24, 47, 50000),
|
||||
REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000),
|
||||
};
|
||||
|
||||
static struct regulator_ops act8865_ops = {
|
||||
.list_voltage = regulator_list_voltage_linear_range,
|
||||
.map_voltage = regulator_map_voltage_linear_range,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = regulator_disable_regmap,
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
.set_suspend_enable = regulator_enable_regmap,
|
||||
.set_suspend_disable = regulator_disable_regmap,
|
||||
};
|
||||
|
||||
static const struct regulator_desc act8865_reg[] = {
|
||||
{
|
||||
.name = "DCDC_REG1",
|
||||
.id = ACT8865_ID_DCDC1,
|
||||
.ops = &act8865_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.n_voltages = ACT8865_VOLTAGE_NUM,
|
||||
.linear_ranges = act8865_volatge_ranges,
|
||||
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
|
||||
.vsel_reg = ACT8865_DCDC1_VSET1,
|
||||
.vsel_mask = ACT8865_VSEL_MASK,
|
||||
.enable_reg = ACT8865_DCDC1_CTRL,
|
||||
.enable_mask = ACT8865_ENA,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
{
|
||||
.name = "DCDC_REG2",
|
||||
.id = ACT8865_ID_DCDC2,
|
||||
.ops = &act8865_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.n_voltages = ACT8865_VOLTAGE_NUM,
|
||||
.linear_ranges = act8865_volatge_ranges,
|
||||
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
|
||||
.vsel_reg = ACT8865_DCDC2_VSET1,
|
||||
.vsel_mask = ACT8865_VSEL_MASK,
|
||||
.enable_reg = ACT8865_DCDC2_CTRL,
|
||||
.enable_mask = ACT8865_ENA,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
{
|
||||
.name = "DCDC_REG3",
|
||||
.id = ACT8865_ID_DCDC3,
|
||||
.ops = &act8865_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.n_voltages = ACT8865_VOLTAGE_NUM,
|
||||
.linear_ranges = act8865_volatge_ranges,
|
||||
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
|
||||
.vsel_reg = ACT8865_DCDC3_VSET1,
|
||||
.vsel_mask = ACT8865_VSEL_MASK,
|
||||
.enable_reg = ACT8865_DCDC3_CTRL,
|
||||
.enable_mask = ACT8865_ENA,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
{
|
||||
.name = "LDO_REG1",
|
||||
.id = ACT8865_ID_LDO1,
|
||||
.ops = &act8865_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.n_voltages = ACT8865_VOLTAGE_NUM,
|
||||
.linear_ranges = act8865_volatge_ranges,
|
||||
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
|
||||
.vsel_reg = ACT8865_LDO1_VSET,
|
||||
.vsel_mask = ACT8865_VSEL_MASK,
|
||||
.enable_reg = ACT8865_LDO1_CTRL,
|
||||
.enable_mask = ACT8865_ENA,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
{
|
||||
.name = "LDO_REG2",
|
||||
.id = ACT8865_ID_LDO2,
|
||||
.ops = &act8865_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.n_voltages = ACT8865_VOLTAGE_NUM,
|
||||
.linear_ranges = act8865_volatge_ranges,
|
||||
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
|
||||
.vsel_reg = ACT8865_LDO2_VSET,
|
||||
.vsel_mask = ACT8865_VSEL_MASK,
|
||||
.enable_reg = ACT8865_LDO2_CTRL,
|
||||
.enable_mask = ACT8865_ENA,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
{
|
||||
.name = "LDO_REG3",
|
||||
.id = ACT8865_ID_LDO3,
|
||||
.ops = &act8865_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.n_voltages = ACT8865_VOLTAGE_NUM,
|
||||
.linear_ranges = act8865_volatge_ranges,
|
||||
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
|
||||
.vsel_reg = ACT8865_LDO3_VSET,
|
||||
.vsel_mask = ACT8865_VSEL_MASK,
|
||||
.enable_reg = ACT8865_LDO3_CTRL,
|
||||
.enable_mask = ACT8865_ENA,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
{
|
||||
.name = "LDO_REG4",
|
||||
.id = ACT8865_ID_LDO4,
|
||||
.ops = &act8865_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.n_voltages = ACT8865_VOLTAGE_NUM,
|
||||
.linear_ranges = act8865_volatge_ranges,
|
||||
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
|
||||
.vsel_reg = ACT8865_LDO4_VSET,
|
||||
.vsel_mask = ACT8865_VSEL_MASK,
|
||||
.enable_reg = ACT8865_LDO4_CTRL,
|
||||
.enable_mask = ACT8865_ENA,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
};
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
static const struct of_device_id act8865_dt_ids[] = {
|
||||
{ .compatible = "active-semi,act8865" },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, act8865_dt_ids);
|
||||
|
||||
static struct of_regulator_match act8865_matches[] = {
|
||||
[ACT8865_ID_DCDC1] = { .name = "DCDC_REG1"},
|
||||
[ACT8865_ID_DCDC2] = { .name = "DCDC_REG2"},
|
||||
[ACT8865_ID_DCDC3] = { .name = "DCDC_REG3"},
|
||||
[ACT8865_ID_LDO1] = { .name = "LDO_REG1"},
|
||||
[ACT8865_ID_LDO2] = { .name = "LDO_REG2"},
|
||||
[ACT8865_ID_LDO3] = { .name = "LDO_REG3"},
|
||||
[ACT8865_ID_LDO4] = { .name = "LDO_REG4"},
|
||||
};
|
||||
|
||||
static int act8865_pdata_from_dt(struct device *dev,
|
||||
struct device_node **of_node,
|
||||
struct act8865_platform_data *pdata)
|
||||
{
|
||||
int matched, i;
|
||||
struct device_node *np;
|
||||
struct act8865_regulator_data *regulator;
|
||||
|
||||
np = of_find_node_by_name(dev->of_node, "regulators");
|
||||
if (!np) {
|
||||
dev_err(dev, "missing 'regulators' subnode in DT\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
matched = of_regulator_match(dev, np,
|
||||
act8865_matches, ARRAY_SIZE(act8865_matches));
|
||||
if (matched <= 0)
|
||||
return matched;
|
||||
|
||||
pdata->regulators = devm_kzalloc(dev,
|
||||
sizeof(struct act8865_regulator_data) * matched,
|
||||
GFP_KERNEL);
|
||||
if (!pdata->regulators) {
|
||||
dev_err(dev, "%s: failed to allocate act8865 registor\n",
|
||||
__func__);
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
pdata->num_regulators = matched;
|
||||
regulator = pdata->regulators;
|
||||
|
||||
for (i = 0; i < matched; i++) {
|
||||
if (!act8865_matches[i].init_data)
|
||||
continue;
|
||||
|
||||
regulator->id = i;
|
||||
regulator->name = act8865_matches[i].name;
|
||||
regulator->platform_data = act8865_matches[i].init_data;
|
||||
of_node[i] = act8865_matches[i].of_node;
|
||||
regulator++;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
#else
|
||||
static inline int act8865_pdata_from_dt(struct device *dev,
|
||||
struct device_node **of_node,
|
||||
struct act8865_platform_data *pdata)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
static int act8865_pmic_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *i2c_id)
|
||||
{
|
||||
struct regulator_dev **rdev;
|
||||
struct device *dev = &client->dev;
|
||||
struct act8865_platform_data *pdata = dev_get_platdata(dev);
|
||||
struct regulator_config config = { };
|
||||
struct act8865 *act8865;
|
||||
struct device_node *of_node[ACT8865_REG_NUM];
|
||||
int i, id;
|
||||
int ret = -EINVAL;
|
||||
int error;
|
||||
|
||||
if (dev->of_node && !pdata) {
|
||||
const struct of_device_id *id;
|
||||
struct act8865_platform_data pdata_of;
|
||||
|
||||
id = of_match_device(of_match_ptr(act8865_dt_ids), dev);
|
||||
if (!id)
|
||||
return -ENODEV;
|
||||
|
||||
ret = act8865_pdata_from_dt(dev, of_node, &pdata_of);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
pdata = &pdata_of;
|
||||
}
|
||||
|
||||
if (pdata->num_regulators > ACT8865_REG_NUM) {
|
||||
dev_err(dev, "Too many regulators found!\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
act8865 = devm_kzalloc(dev, sizeof(struct act8865) +
|
||||
sizeof(struct regulator_dev *) * ACT8865_REG_NUM,
|
||||
GFP_KERNEL);
|
||||
if (!act8865)
|
||||
return -ENOMEM;
|
||||
|
||||
rdev = act8865->rdev;
|
||||
|
||||
act8865->regmap = devm_regmap_init_i2c(client, &act8865_regmap_config);
|
||||
if (IS_ERR(act8865->regmap)) {
|
||||
error = PTR_ERR(act8865->regmap);
|
||||
dev_err(&client->dev, "Failed to allocate register map: %d\n",
|
||||
error);
|
||||
return error;
|
||||
}
|
||||
|
||||
/* Finally register devices */
|
||||
for (i = 0; i < pdata->num_regulators; i++) {
|
||||
|
||||
id = pdata->regulators[i].id;
|
||||
|
||||
config.dev = dev;
|
||||
config.init_data = pdata->regulators[i].platform_data;
|
||||
config.of_node = of_node[i];
|
||||
config.driver_data = act8865;
|
||||
config.regmap = act8865->regmap;
|
||||
|
||||
rdev[i] = devm_regulator_register(&client->dev,
|
||||
&act8865_reg[i], &config);
|
||||
if (IS_ERR(rdev[i])) {
|
||||
dev_err(dev, "failed to register %s\n",
|
||||
act8865_reg[id].name);
|
||||
return PTR_ERR(rdev[i]);
|
||||
}
|
||||
}
|
||||
|
||||
i2c_set_clientdata(client, act8865);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int act8865_pmic_remove(struct i2c_client *client)
|
||||
{
|
||||
struct act8865 *act8865 = i2c_get_clientdata(client);
|
||||
int i;
|
||||
|
||||
for (i = 0; i < ACT8865_REG_NUM; i++)
|
||||
regulator_unregister(act8865->rdev[i]);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct i2c_device_id act8865_ids[] = {
|
||||
{ "act8865", 0 },
|
||||
{ },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, act8865_ids);
|
||||
|
||||
static struct i2c_driver act8865_pmic_driver = {
|
||||
.driver = {
|
||||
.name = "act8865",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
.probe = act8865_pmic_probe,
|
||||
.remove = act8865_pmic_remove,
|
||||
.id_table = act8865_ids,
|
||||
};
|
||||
|
||||
module_i2c_driver(act8865_pmic_driver);
|
||||
|
||||
MODULE_DESCRIPTION("active-semi act8865 voltage regulator driver");
|
||||
MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
53
include/linux/regulator/act8865.h
Normal file
53
include/linux/regulator/act8865.h
Normal file
@ -0,0 +1,53 @@
|
||||
/*
|
||||
* act8865.h -- Voltage regulation for the active-semi act8865
|
||||
*
|
||||
* Copyright (C) 2013 Atmel Corporation.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#ifndef __LINUX_REGULATOR_ACT8865_H
|
||||
#define __LINUX_REGULATOR_ACT8865_H
|
||||
|
||||
#include <linux/regulator/machine.h>
|
||||
|
||||
enum {
|
||||
ACT8865_ID_DCDC1,
|
||||
ACT8865_ID_DCDC2,
|
||||
ACT8865_ID_DCDC3,
|
||||
ACT8865_ID_LDO1,
|
||||
ACT8865_ID_LDO2,
|
||||
ACT8865_ID_LDO3,
|
||||
ACT8865_ID_LDO4,
|
||||
ACT8865_REG_NUM,
|
||||
};
|
||||
|
||||
/**
|
||||
* act8865_regulator_data - regulator data
|
||||
* @id: regulator id
|
||||
* @name: regulator name
|
||||
* @platform_data: regulator init data
|
||||
*/
|
||||
struct act8865_regulator_data {
|
||||
int id;
|
||||
const char *name;
|
||||
struct regulator_init_data *platform_data;
|
||||
};
|
||||
|
||||
/**
|
||||
* act8865_platform_data - platform data for act8865
|
||||
* @num_regulators: number of regulators used
|
||||
* @regulators: pointer to regulators used
|
||||
*/
|
||||
struct act8865_platform_data {
|
||||
int num_regulators;
|
||||
struct act8865_regulator_data *regulators;
|
||||
};
|
||||
#endif
|
||||
Loading…
Reference in New Issue
Block a user