leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

PCI: pciehp: replace unconditional sleep with config space access check

Browse Source 
During reviewing
|	PCI: pciehp: wait 1000 ms before Link Training check
Linus said:
>...
> That's a *long* time, and it's irritating to the user. It makes the
> user think "the machine is slow".
>...
> And quite frankly, an unconditional one-second delay here seems bad.
>Two seconds was unacceptable, one second is just bad.

Try to access the pci conf of a pci device that is supposed to show up
in 1s.  If we can read back a valid vendor/device id, we can return
early.

Related discussion could be found:
	https://lkml.org/lkml/2011/12/6/339

-v2: seperate code to pci_bus_read_dev_vendor_id() from pci_scan_device()
    and reuse it from pciehp code. Suggested by Matthew Wilcox.
-v3: According to Kenj, don't use array in stack, and don't wait too long
    for crs, also return fail status if not found.
    Also separate pci_bus_dev_read_vendor_id() change to another patch.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This commit is contained in:
Yinghai Lu 2012-01-27 10:55:11 -08:00 committed by Jesse Barnes
parent efdc87dab1
commit 2f5d8e4ff9
1 changed files with 34 additions and 15 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

49
drivers/pci/hotplug/pciehp_hpc.c
View File

@ -265,10 +265,37 @@ static void pcie_wait_link_active(struct controller *ctrl)
ctrl_dbg(ctrl, "Data Link Layer Link Active not set in 1000 msec\n");
}
static bool pci_bus_check_dev(struct pci_bus *bus, int devfn)
{
u32 l;
int count = 0;
int delay = 1000, step = 20;
bool found = false;
do {
found = pci_bus_read_dev_vendor_id(bus, devfn, &l, 0);
count++;
if (found)
break;
msleep(step);
delay -= step;
} while (delay > 0);
if (count > 1 && pciehp_debug)
printk(KERN_DEBUG "pci %04x:%02x:%02x.%d id reading try %d times with interval %d ms to get %08x\n",
pci_domain_nr(bus), bus->number, PCI_SLOT(devfn),
PCI_FUNC(devfn), count, step, l);
return found;
}
int pciehp_check_link_status(struct controller *ctrl)
{
u16 lnk_status;
int retval = 0;
bool found = false;
/*
* Data Link Layer Link Active Reporting must be capable for
@ -280,13 +307,10 @@ int pciehp_check_link_status(struct controller *ctrl)
else
msleep(1000);
/*
* Need to wait for 1000 ms after Data Link Layer Link Active
* (DLLLA) bit reads 1b before sending configuration request.
* We need it before checking Link Training (LT) bit becuase
* LT is still set even after DLLLA bit is set on some platform.
*/
msleep(1000);
/* wait 100ms before read pci conf, and try in 1s */
msleep(100);
found = pci_bus_check_dev(ctrl->pcie->port->subordinate,
PCI_DEVFN(0, 0));
retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status);
if (retval) {
@ -302,16 +326,11 @@ int pciehp_check_link_status(struct controller *ctrl)
return retval;
}
/*
* If the port supports Link speeds greater than 5.0 GT/s, we
* must wait for 100 ms after Link training completes before
* sending configuration request.
*/
if (ctrl->pcie->port->subordinate->max_bus_speed > PCIE_SPEED_5_0GT)
msleep(100);
pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status);
if (!found && !retval)
retval = -1;
return retval;
}