Revert "cxl: Add cxl_check_and_switch_mode() API to switch bi-modal cards"

Remove abandonned capi support for the Mellanox CX4.

This reverts commit b0b5e5918a.

Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This commit is contained in:
Alastair D'Silva 2018-06-28 12:05:04 +02:00 committed by Michael Ellerman
parent 82c6ae67fb
commit 29fea8aa21
3 changed files with 20 additions and 253 deletions

View File

@ -33,11 +33,3 @@ config CXL
CAPI adapters are found in POWER8 based systems.
If unsure, say N.
config CXL_BIMODAL
bool "Support for bi-modal CAPI cards"
depends on HOTPLUG_PCI_POWERNV = y && CXL || HOTPLUG_PCI_POWERNV = m && CXL = m
default y
help
Select this option to enable support for bi-modal CAPI cards, such as
the Mellanox CX-4.

View File

@ -55,8 +55,6 @@
pci_read_config_byte(dev, vsec + 0xa, dest)
#define CXL_WRITE_VSEC_MODE_CONTROL(dev, vsec, val) \
pci_write_config_byte(dev, vsec + 0xa, val)
#define CXL_WRITE_VSEC_MODE_CONTROL_BUS(bus, devfn, vsec, val) \
pci_bus_write_config_byte(bus, devfn, vsec + 0xa, val)
#define CXL_VSEC_PROTOCOL_MASK 0xe0
#define CXL_VSEC_PROTOCOL_1024TB 0x80
#define CXL_VSEC_PROTOCOL_512TB 0x40
@ -800,235 +798,37 @@ static int setup_cxl_bars(struct pci_dev *dev)
return 0;
}
#ifdef CONFIG_CXL_BIMODAL
struct cxl_switch_work {
struct pci_dev *dev;
struct work_struct work;
int vsec;
int mode;
};
static void switch_card_to_cxl(struct work_struct *work)
/* pciex node: ibm,opal-m64-window = <0x3d058 0x0 0x3d058 0x0 0x8 0x0>; */
static int switch_card_to_cxl(struct pci_dev *dev)
{
struct cxl_switch_work *switch_work =
container_of(work, struct cxl_switch_work, work);
struct pci_dev *dev = switch_work->dev;
struct pci_bus *bus = dev->bus;
struct pci_controller *hose = pci_bus_to_host(bus);
struct pci_dev *bridge;
struct pnv_php_slot *php_slot;
unsigned int devfn;
int vsec;
u8 val;
int rc;
dev_info(&bus->dev, "cxl: Preparing for mode switch...\n");
bridge = list_first_entry_or_null(&hose->bus->devices, struct pci_dev,
bus_list);
if (!bridge) {
dev_WARN(&bus->dev, "cxl: Couldn't find root port!\n");
goto err_dev_put;
dev_info(&dev->dev, "switch card to CXL\n");
if (!(vsec = find_cxl_vsec(dev))) {
dev_err(&dev->dev, "ABORTING: CXL VSEC not found!\n");
return -ENODEV;
}
php_slot = pnv_php_find_slot(pci_device_to_OF_node(bridge));
if (!php_slot) {
dev_err(&bus->dev, "cxl: Failed to find slot hotplug "
"information. You may need to upgrade "
"skiboot. Aborting.\n");
goto err_dev_put;
if ((rc = CXL_READ_VSEC_MODE_CONTROL(dev, vsec, &val))) {
dev_err(&dev->dev, "failed to read current mode control: %i", rc);
return rc;
}
rc = CXL_READ_VSEC_MODE_CONTROL(dev, switch_work->vsec, &val);
if (rc) {
dev_err(&bus->dev, "cxl: Failed to read CAPI mode control: %i\n", rc);
goto err_dev_put;
val &= ~CXL_VSEC_PROTOCOL_MASK;
val |= CXL_VSEC_PROTOCOL_256TB | CXL_VSEC_PROTOCOL_ENABLE;
if ((rc = CXL_WRITE_VSEC_MODE_CONTROL(dev, vsec, val))) {
dev_err(&dev->dev, "failed to enable CXL protocol: %i", rc);
return rc;
}
devfn = dev->devfn;
/* Release the reference obtained in cxl_check_and_switch_mode() */
pci_dev_put(dev);
dev_dbg(&bus->dev, "cxl: Removing PCI devices from kernel\n");
pci_lock_rescan_remove();
pci_hp_remove_devices(bridge->subordinate);
pci_unlock_rescan_remove();
/* Switch the CXL protocol on the card */
if (switch_work->mode == CXL_BIMODE_CXL) {
dev_info(&bus->dev, "cxl: Switching card to CXL mode\n");
val &= ~CXL_VSEC_PROTOCOL_MASK;
val |= CXL_VSEC_PROTOCOL_256TB | CXL_VSEC_PROTOCOL_ENABLE;
rc = pnv_cxl_enable_phb_kernel_api(hose, true);
if (rc) {
dev_err(&bus->dev, "cxl: Failed to enable kernel API"
" on real PHB, aborting\n");
goto err_free_work;
}
} else {
dev_WARN(&bus->dev, "cxl: Switching card to PCI mode not supported!\n");
goto err_free_work;
}
rc = CXL_WRITE_VSEC_MODE_CONTROL_BUS(bus, devfn, switch_work->vsec, val);
if (rc) {
dev_err(&bus->dev, "cxl: Failed to configure CXL protocol: %i\n", rc);
goto err_free_work;
}
/*
* The CAIA spec (v1.1, Section 10.6 Bi-modal Device Support) states
* we must wait 100ms after this mode switch before touching PCIe config
* space.
* The CAIA spec (v0.12 11.6 Bi-modal Device Support) states
* we must wait 100ms after this mode switch before touching
* PCIe config space.
*/
msleep(100);
/*
* Hot reset to cause the card to come back in cxl mode. A
* OPAL_RESET_PCI_LINK would be sufficient, but currently lacks support
* in skiboot, so we use a hot reset instead.
*
* We call pci_set_pcie_reset_state() on the bridge, as a CAPI card is
* guaranteed to sit directly under the root port, and setting the reset
* state on a device directly under the root port is equivalent to doing
* it on the root port iself.
*/
dev_info(&bus->dev, "cxl: Configuration write complete, resetting card\n");
pci_set_pcie_reset_state(bridge, pcie_hot_reset);
pci_set_pcie_reset_state(bridge, pcie_deassert_reset);
dev_dbg(&bus->dev, "cxl: Offlining slot\n");
rc = pnv_php_set_slot_power_state(&php_slot->slot, OPAL_PCI_SLOT_OFFLINE);
if (rc) {
dev_err(&bus->dev, "cxl: OPAL offlining call failed: %i\n", rc);
goto err_free_work;
}
dev_dbg(&bus->dev, "cxl: Onlining and probing slot\n");
rc = pnv_php_set_slot_power_state(&php_slot->slot, OPAL_PCI_SLOT_ONLINE);
if (rc) {
dev_err(&bus->dev, "cxl: OPAL onlining call failed: %i\n", rc);
goto err_free_work;
}
pci_lock_rescan_remove();
pci_hp_add_devices(bridge->subordinate);
pci_unlock_rescan_remove();
dev_info(&bus->dev, "cxl: CAPI mode switch completed\n");
kfree(switch_work);
return;
err_dev_put:
/* Release the reference obtained in cxl_check_and_switch_mode() */
pci_dev_put(dev);
err_free_work:
kfree(switch_work);
}
int cxl_check_and_switch_mode(struct pci_dev *dev, int mode, int vsec)
{
struct cxl_switch_work *work;
u8 val;
int rc;
if (!cpu_has_feature(CPU_FTR_HVMODE))
return -ENODEV;
if (!vsec) {
vsec = find_cxl_vsec(dev);
if (!vsec) {
dev_info(&dev->dev, "CXL VSEC not found\n");
return -ENODEV;
}
}
rc = CXL_READ_VSEC_MODE_CONTROL(dev, vsec, &val);
if (rc) {
dev_err(&dev->dev, "Failed to read current mode control: %i", rc);
return rc;
}
if (mode == CXL_BIMODE_PCI) {
if (!(val & CXL_VSEC_PROTOCOL_ENABLE)) {
dev_info(&dev->dev, "Card is already in PCI mode\n");
return 0;
}
/*
* TODO: Before it's safe to switch the card back to PCI mode
* we need to disable the CAPP and make sure any cachelines the
* card holds have been flushed out. Needs skiboot support.
*/
dev_WARN(&dev->dev, "CXL mode switch to PCI unsupported!\n");
return -EIO;
}
if (val & CXL_VSEC_PROTOCOL_ENABLE) {
dev_info(&dev->dev, "Card is already in CXL mode\n");
return 0;
}
dev_info(&dev->dev, "Card is in PCI mode, scheduling kernel thread "
"to switch to CXL mode\n");
work = kmalloc(sizeof(struct cxl_switch_work), GFP_KERNEL);
if (!work)
return -ENOMEM;
pci_dev_get(dev);
work->dev = dev;
work->vsec = vsec;
work->mode = mode;
INIT_WORK(&work->work, switch_card_to_cxl);
schedule_work(&work->work);
/*
* We return a failure now to abort the driver init. Once the
* link has been cycled and the card is in cxl mode we will
* come back (possibly using the generic cxl driver), but
* return success as the card should then be in cxl mode.
*
* TODO: What if the card comes back in PCI mode even after
* the switch? Don't want to spin endlessly.
*/
return -EBUSY;
}
EXPORT_SYMBOL_GPL(cxl_check_and_switch_mode);
#endif /* CONFIG_CXL_BIMODAL */
static int setup_cxl_protocol_area(struct pci_dev *dev)
{
u8 val;
int rc;
int vsec = find_cxl_vsec(dev);
if (!vsec) {
dev_info(&dev->dev, "CXL VSEC not found\n");
return -ENODEV;
}
rc = CXL_READ_VSEC_MODE_CONTROL(dev, vsec, &val);
if (rc) {
dev_err(&dev->dev, "Failed to read current mode control: %i\n", rc);
return rc;
}
if (!(val & CXL_VSEC_PROTOCOL_ENABLE)) {
dev_err(&dev->dev, "Card not in CAPI mode!\n");
return -EIO;
}
if ((val & CXL_VSEC_PROTOCOL_MASK) != CXL_VSEC_PROTOCOL_256TB) {
val &= ~CXL_VSEC_PROTOCOL_MASK;
val |= CXL_VSEC_PROTOCOL_256TB;
rc = CXL_WRITE_VSEC_MODE_CONTROL(dev, vsec, val);
if (rc) {
dev_err(&dev->dev, "Failed to set CXL protocol area: %i\n", rc);
return rc;
}
}
return 0;
}
@ -1724,7 +1524,7 @@ static int cxl_configure_adapter(struct cxl *adapter, struct pci_dev *dev)
if ((rc = setup_cxl_bars(dev)))
return rc;
if ((rc = setup_cxl_protocol_area(dev)))
if ((rc = switch_card_to_cxl(dev)))
return rc;
if ((rc = cxl_update_image_control(adapter)))

View File

@ -39,31 +39,6 @@
bool cxl_slot_is_supported(struct pci_dev *dev, int flags);
#define CXL_BIMODE_CXL 1
#define CXL_BIMODE_PCI 2
/*
* Check the mode that the given bi-modal CXL adapter is currently in and
* change it if necessary. This does not apply to AFU drivers.
*
* If the mode matches the requested mode this function will return 0 - if the
* driver was expecting the generic CXL driver to have bound to the adapter and
* it gets this return value it should fail the probe function to give the CXL
* driver a chance to probe it.
*
* If the mode does not match it will start a background task to unplug the
* device from Linux and switch its mode, and will return -EBUSY. At this
* point the calling driver should make sure it has released the device and
* fail its probe function.
*
* The offset of the CXL VSEC can be provided to this function. If 0 is passed,
* this function will search for a CXL VSEC with ID 0x1280 and return -ENODEV
* if it is not found.
*/
#ifdef CONFIG_CXL_BIMODAL
int cxl_check_and_switch_mode(struct pci_dev *dev, int mode, int vsec);
#endif
/* Get the AFU associated with a pci_dev */
struct cxl_afu *cxl_pci_to_afu(struct pci_dev *dev);