forked from Minki/linux
i2c-nforce2: Add support for multiplexing on the Tyan S4985
Just like the Tyan S4882, the S4985 uses a multiplexer to give access to all 16 memory module SPD EEPROMs. This specific i2c-nforce2-s4985 driver adds support for this. It is heavily based on the older i2c-amd756-s4882 driver. As more mainboards will use multiplexer chips, we will have to find a way to support them without having to write a new specfic driver for each. The recent changes to the i2c subsystem should help us, and the new gpio subsystem might help, too. Signed-off-by: Jean Delvare <khali@linux-fr.org>
This commit is contained in:
Jean Delvare
Jean Delvare
parent
2e74378798
commit
279e902445
@ -315,6 +315,19 @@ config I2C_NFORCE2
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called i2c-nforce2.
|
||||
|
||||
config I2C_NFORCE2_S4985
|
||||
tristate "SMBus multiplexing on the Tyan S4985"
|
||||
depends on I2C_NFORCE2 && EXPERIMENTAL
|
||||
help
|
||||
Enabling this option will add specific SMBus support for the Tyan
|
||||
S4985 motherboard. On this 4-CPU board, the SMBus is multiplexed
|
||||
over 4 different channels, where the various memory module EEPROMs
|
||||
live. Saying yes here will give you access to these in addition
|
||||
to the trunk.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called i2c-nforce2-s4985.
|
||||
|
||||
config I2C_OCORES
|
||||
tristate "OpenCores I2C Controller"
|
||||
depends on EXPERIMENTAL
|
||||
|
||||
@ -24,6 +24,7 @@ obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o
|
||||
obj-$(CONFIG_I2C_MPC) += i2c-mpc.o
|
||||
obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o
|
||||
obj-$(CONFIG_I2C_NFORCE2) += i2c-nforce2.o
|
||||
obj-$(CONFIG_I2C_NFORCE2_S4985) += i2c-nforce2-s4985.o
|
||||
obj-$(CONFIG_I2C_OCORES) += i2c-ocores.o
|
||||
obj-$(CONFIG_I2C_OMAP) += i2c-omap.o
|
||||
obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
|
||||
|
||||
257
drivers/i2c/busses/i2c-nforce2-s4985.c
Normal file
257
drivers/i2c/busses/i2c-nforce2-s4985.c
Normal file
@ -0,0 +1,257 @@
|
||||
/*
|
||||
* i2c-nforce2-s4985.c - i2c-nforce2 extras for the Tyan S4985 motherboard
|
||||
*
|
||||
* Copyright (C) 2008 Jean Delvare <khali@linux-fr.org>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*/
|
||||
|
||||
/*
|
||||
* We select the channels by sending commands to the Philips
|
||||
* PCA9556 chip at I2C address 0x18. The main adapter is used for
|
||||
* the non-multiplexed part of the bus, and 4 virtual adapters
|
||||
* are defined for the multiplexed addresses: 0x50-0x53 (memory
|
||||
* module EEPROM) located on channels 1-4. We define one virtual
|
||||
* adapter per CPU, which corresponds to one multiplexed channel:
|
||||
* CPU0: virtual adapter 1, channel 1
|
||||
* CPU1: virtual adapter 2, channel 2
|
||||
* CPU2: virtual adapter 3, channel 3
|
||||
* CPU3: virtual adapter 4, channel 4
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/mutex.h>
|
||||
|
||||
extern struct i2c_adapter *nforce2_smbus;
|
||||
|
||||
static struct i2c_adapter *s4985_adapter;
|
||||
static struct i2c_algorithm *s4985_algo;
|
||||
|
||||
/* Wrapper access functions for multiplexed SMBus */
|
||||
static DEFINE_MUTEX(nforce2_lock);
|
||||
|
||||
static s32 nforce2_access_virt0(struct i2c_adapter *adap, u16 addr,
|
||||
unsigned short flags, char read_write,
|
||||
u8 command, int size,
|
||||
union i2c_smbus_data *data)
|
||||
{
|
||||
int error;
|
||||
|
||||
/* We exclude the multiplexed addresses */
|
||||
if ((addr & 0xfc) == 0x50 || (addr & 0xfc) == 0x30
|
||||
|| addr == 0x18)
|
||||
return -ENXIO;
|
||||
|
||||
mutex_lock(&nforce2_lock);
|
||||
error = nforce2_smbus->algo->smbus_xfer(adap, addr, flags, read_write,
|
||||
command, size, data);
|
||||
mutex_unlock(&nforce2_lock);
|
||||
|
||||
return error;
|
||||
}
|
||||
|
||||
/* We remember the last used channels combination so as to only switch
|
||||
channels when it is really needed. This greatly reduces the SMBus
|
||||
overhead, but also assumes that nobody will be writing to the PCA9556
|
||||
in our back. */
|
||||
static u8 last_channels;
|
||||
|
||||
static inline s32 nforce2_access_channel(struct i2c_adapter *adap, u16 addr,
|
||||
unsigned short flags, char read_write,
|
||||
u8 command, int size,
|
||||
union i2c_smbus_data *data,
|
||||
u8 channels)
|
||||
{
|
||||
int error;
|
||||
|
||||
/* We exclude the non-multiplexed addresses */
|
||||
if ((addr & 0xfc) != 0x50 && (addr & 0xfc) != 0x30)
|
||||
return -ENXIO;
|
||||
|
||||
mutex_lock(&nforce2_lock);
|
||||
if (last_channels != channels) {
|
||||
union i2c_smbus_data mplxdata;
|
||||
mplxdata.byte = channels;
|
||||
|
||||
error = nforce2_smbus->algo->smbus_xfer(adap, 0x18, 0,
|
||||
I2C_SMBUS_WRITE, 0x01,
|
||||
I2C_SMBUS_BYTE_DATA,
|
||||
&mplxdata);
|
||||
if (error)
|
||||
goto UNLOCK;
|
||||
last_channels = channels;
|
||||
}
|
||||
error = nforce2_smbus->algo->smbus_xfer(adap, addr, flags, read_write,
|
||||
command, size, data);
|
||||
|
||||
UNLOCK:
|
||||
mutex_unlock(&nforce2_lock);
|
||||
return error;
|
||||
}
|
||||
|
||||
static s32 nforce2_access_virt1(struct i2c_adapter *adap, u16 addr,
|
||||
unsigned short flags, char read_write,
|
||||
u8 command, int size,
|
||||
union i2c_smbus_data *data)
|
||||
{
|
||||
/* CPU0: channel 1 enabled */
|
||||
return nforce2_access_channel(adap, addr, flags, read_write, command,
|
||||
size, data, 0x02);
|
||||
}
|
||||
|
||||
static s32 nforce2_access_virt2(struct i2c_adapter *adap, u16 addr,
|
||||
unsigned short flags, char read_write,
|
||||
u8 command, int size,
|
||||
union i2c_smbus_data *data)
|
||||
{
|
||||
/* CPU1: channel 2 enabled */
|
||||
return nforce2_access_channel(adap, addr, flags, read_write, command,
|
||||
size, data, 0x04);
|
||||
}
|
||||
|
||||
static s32 nforce2_access_virt3(struct i2c_adapter *adap, u16 addr,
|
||||
unsigned short flags, char read_write,
|
||||
u8 command, int size,
|
||||
union i2c_smbus_data *data)
|
||||
{
|
||||
/* CPU2: channel 3 enabled */
|
||||
return nforce2_access_channel(adap, addr, flags, read_write, command,
|
||||
size, data, 0x08);
|
||||
}
|
||||
|
||||
static s32 nforce2_access_virt4(struct i2c_adapter *adap, u16 addr,
|
||||
unsigned short flags, char read_write,
|
||||
u8 command, int size,
|
||||
union i2c_smbus_data *data)
|
||||
{
|
||||
/* CPU3: channel 4 enabled */
|
||||
return nforce2_access_channel(adap, addr, flags, read_write, command,
|
||||
size, data, 0x10);
|
||||
}
|
||||
|
||||
static int __init nforce2_s4985_init(void)
|
||||
{
|
||||
int i, error;
|
||||
union i2c_smbus_data ioconfig;
|
||||
|
||||
/* Unregister physical bus */
|
||||
if (!nforce2_smbus)
|
||||
return -ENODEV;
|
||||
error = i2c_del_adapter(nforce2_smbus);
|
||||
if (error) {
|
||||
dev_err(&nforce2_smbus->dev, "Physical bus removal failed\n");
|
||||
goto ERROR0;
|
||||
}
|
||||
|
||||
printk(KERN_INFO "Enabling SMBus multiplexing for Tyan S4985\n");
|
||||
/* Define the 5 virtual adapters and algorithms structures */
|
||||
s4985_adapter = kzalloc(5 * sizeof(struct i2c_adapter), GFP_KERNEL);
|
||||
if (!s4985_adapter) {
|
||||
error = -ENOMEM;
|
||||
goto ERROR1;
|
||||
}
|
||||
s4985_algo = kzalloc(5 * sizeof(struct i2c_algorithm), GFP_KERNEL);
|
||||
if (!s4985_algo) {
|
||||
error = -ENOMEM;
|
||||
goto ERROR2;
|
||||
}
|
||||
|
||||
/* Fill in the new structures */
|
||||
s4985_algo[0] = *(nforce2_smbus->algo);
|
||||
s4985_algo[0].smbus_xfer = nforce2_access_virt0;
|
||||
s4985_adapter[0] = *nforce2_smbus;
|
||||
s4985_adapter[0].algo = s4985_algo;
|
||||
s4985_adapter[0].dev.parent = nforce2_smbus->dev.parent;
|
||||
for (i = 1; i < 5; i++) {
|
||||
s4985_algo[i] = *(nforce2_smbus->algo);
|
||||
s4985_adapter[i] = *nforce2_smbus;
|
||||
snprintf(s4985_adapter[i].name, sizeof(s4985_adapter[i].name),
|
||||
"SMBus nForce2 adapter (CPU%d)", i - 1);
|
||||
s4985_adapter[i].algo = s4985_algo + i;
|
||||
s4985_adapter[i].dev.parent = nforce2_smbus->dev.parent;
|
||||
}
|
||||
s4985_algo[1].smbus_xfer = nforce2_access_virt1;
|
||||
s4985_algo[2].smbus_xfer = nforce2_access_virt2;
|
||||
s4985_algo[3].smbus_xfer = nforce2_access_virt3;
|
||||
s4985_algo[4].smbus_xfer = nforce2_access_virt4;
|
||||
|
||||
/* Configure the PCA9556 multiplexer */
|
||||
ioconfig.byte = 0x00; /* All I/O to output mode */
|
||||
error = nforce2_smbus->algo->smbus_xfer(nforce2_smbus, 0x18, 0,
|
||||
I2C_SMBUS_WRITE, 0x03,
|
||||
I2C_SMBUS_BYTE_DATA, &ioconfig);
|
||||
if (error) {
|
||||
dev_err(&nforce2_smbus->dev, "PCA9556 configuration failed\n");
|
||||
error = -EIO;
|
||||
goto ERROR3;
|
||||
}
|
||||
|
||||
/* Register virtual adapters */
|
||||
for (i = 0; i < 5; i++) {
|
||||
error = i2c_add_adapter(s4985_adapter + i);
|
||||
if (error) {
|
||||
dev_err(&nforce2_smbus->dev,
|
||||
"Virtual adapter %d registration "
|
||||
"failed, module not inserted\n", i);
|
||||
for (i--; i >= 0; i--)
|
||||
i2c_del_adapter(s4985_adapter + i);
|
||||
goto ERROR3;
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
||||
ERROR3:
|
||||
kfree(s4985_algo);
|
||||
s4985_algo = NULL;
|
||||
ERROR2:
|
||||
kfree(s4985_adapter);
|
||||
s4985_adapter = NULL;
|
||||
ERROR1:
|
||||
/* Restore physical bus */
|
||||
i2c_add_adapter(nforce2_smbus);
|
||||
ERROR0:
|
||||
return error;
|
||||
}
|
||||
|
||||
static void __exit nforce2_s4985_exit(void)
|
||||
{
|
||||
if (s4985_adapter) {
|
||||
int i;
|
||||
|
||||
for (i = 0; i < 5; i++)
|
||||
i2c_del_adapter(s4985_adapter+i);
|
||||
kfree(s4985_adapter);
|
||||
s4985_adapter = NULL;
|
||||
}
|
||||
kfree(s4985_algo);
|
||||
s4985_algo = NULL;
|
||||
|
||||
/* Restore physical bus */
|
||||
if (i2c_add_adapter(nforce2_smbus))
|
||||
dev_err(&nforce2_smbus->dev, "Physical bus restoration "
|
||||
"failed\n");
|
||||
}
|
||||
|
||||
MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
|
||||
MODULE_DESCRIPTION("S4985 SMBus multiplexing");
|
||||
MODULE_LICENSE("GPL");
|
||||
|
||||
module_init(nforce2_s4985_init);
|
||||
module_exit(nforce2_s4985_exit);
|
||||
@ -124,6 +124,20 @@ static struct dmi_system_id __devinitdata nforce2_dmi_blacklist2[] = {
|
||||
|
||||
static struct pci_driver nforce2_driver;
|
||||
|
||||
/* For multiplexing support, we need a global reference to the 1st
|
||||
SMBus channel */
|
||||
#if defined CONFIG_I2C_NFORCE2_S4985 || defined CONFIG_I2C_NFORCE2_S4985_MODULE
|
||||
struct i2c_adapter *nforce2_smbus;
|
||||
EXPORT_SYMBOL_GPL(nforce2_smbus);
|
||||
|
||||
static void nforce2_set_reference(struct i2c_adapter *adap)
|
||||
{
|
||||
nforce2_smbus = adap;
|
||||
}
|
||||
#else
|
||||
static inline void nforce2_set_reference(struct i2c_adapter *adap) { }
|
||||
#endif
|
||||
|
||||
static void nforce2_abort(struct i2c_adapter *adap)
|
||||
{
|
||||
struct nforce2_smbus *smbus = adap->algo_data;
|
||||
@ -398,6 +412,7 @@ static int __devinit nforce2_probe(struct pci_dev *dev, const struct pci_device_
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
nforce2_set_reference(&smbuses[0].adapter);
|
||||
return 0;
|
||||
}
|
||||
|
||||
@ -406,6 +421,7 @@ static void __devexit nforce2_remove(struct pci_dev *dev)
|
||||
{
|
||||
struct nforce2_smbus *smbuses = (void*) pci_get_drvdata(dev);
|
||||
|
||||
nforce2_set_reference(NULL);
|
||||
if (smbuses[0].base) {
|
||||
i2c_del_adapter(&smbuses[0].adapter);
|
||||
release_region(smbuses[0].base, smbuses[0].size);
|
||||
|
||||
Loading…
Reference in New Issue
Block a user