Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

Conflicts:
	Documentation/feature-removal-schedule.txt
	drivers/net/wireless/ath/ar9170/usb.c
	drivers/scsi/iscsi_tcp.c
	net/ipv4/ipmr.c

Documentation/DocBook/libata.tmpl

@@ -107,10 +107,6 @@ void (*dev_config) (struct ata_port *, struct ata_device *);
 	issue of SET FEATURES - XFER MODE, and prior to operation.
 	</para>
 	<para>
-	Called by ata_device_add() after ata_dev_identify() determines
-	a device is present.
-	</para>
-	<para>
 	This entry may be specified as NULL in ata_port_operations.
 	</para>
 
@@ -154,8 +150,8 @@ unsigned int (*mode_filter) (struct ata_port *, struct ata_device *, unsigned in
 
 	<sect2><title>Taskfile read/write</title>
 	<programlisting>
-void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
-void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
 	</programlisting>
 
 	<para>
@@ -164,36 +160,35 @@ void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
 	hardware registers / DMA buffers, to obtain the current set of
 	taskfile register values.
 	Most drivers for taskfile-based hardware (PIO or MMIO) use
-	ata_tf_load() and ata_tf_read() for these hooks.
+	ata_sff_tf_load() and ata_sff_tf_read() for these hooks.
 	</para>
 
 	</sect2>
 
 	<sect2><title>PIO data read/write</title>
 	<programlisting>
-void (*data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);
+void (*sff_data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);
 	</programlisting>
 
 	<para>
 All bmdma-style drivers must implement this hook.  This is the low-level
 operation that actually copies the data bytes during a PIO data
 transfer.
-Typically the driver
+Typically the driver will choose one of ata_sff_data_xfer_noirq(),
-will choose one of ata_pio_data_xfer_noirq(), ata_pio_data_xfer(), or
+ata_sff_data_xfer(), or ata_sff_data_xfer32().
-ata_mmio_data_xfer().
 	</para>
 
 	</sect2>
 
 	<sect2><title>ATA command execute</title>
 	<programlisting>
-void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
 	</programlisting>
 
 	<para>
 	causes an ATA command, previously loaded with
 	->tf_load(), to be initiated in hardware.
-	Most drivers for taskfile-based hardware use ata_exec_command()
+	Most drivers for taskfile-based hardware use ata_sff_exec_command()
 	for this hook.
 	</para>
 
@@ -218,8 +213,8 @@ command.
 
 	<sect2><title>Read specific ATA shadow registers</title>
 	<programlisting>
-u8   (*check_status)(struct ata_port *ap);
+u8   (*sff_check_status)(struct ata_port *ap);
-u8   (*check_altstatus)(struct ata_port *ap);
+u8   (*sff_check_altstatus)(struct ata_port *ap);
 	</programlisting>
 
 	<para>
@@ -227,20 +222,14 @@ u8   (*check_altstatus)(struct ata_port *ap);
 	hardware.  On some hardware, reading the Status register has
 	the side effect of clearing the interrupt condition.
 	Most drivers for taskfile-based hardware use
-	ata_check_status() for this hook.
+	ata_sff_check_status() for this hook.
-	</para>
-	<para>
-	Note that because this is called from ata_device_add(), at
-	least a dummy function that clears device interrupts must be
-	provided for all drivers, even if the controller doesn't
-	actually have a taskfile status register.
 	</para>
 
 	</sect2>
 
 	<sect2><title>Select ATA device on bus</title>
 	<programlisting>
-void (*dev_select)(struct ata_port *ap, unsigned int device);
+void (*sff_dev_select)(struct ata_port *ap, unsigned int device);
 	</programlisting>
 
 	<para>
@@ -251,9 +240,7 @@ void (*dev_select)(struct ata_port *ap, unsigned int device);
 	</para>
 	<para>
 	Most drivers for taskfile-based hardware use
-	ata_std_dev_select() for this hook.  Controllers which do not
+	ata_sff_dev_select() for this hook.
-	support second drives on a port (such as SATA contollers) will
-	use ata_noop_dev_select().
 	</para>
 
 	</sect2>
@@ -441,13 +428,13 @@ void (*irq_clear) (struct ata_port *);
 	to struct ata_host_set.
 	</para>
 	<para>
-	Most legacy IDE drivers use ata_interrupt() for the
+	Most legacy IDE drivers use ata_sff_interrupt() for the
 	irq_handler hook, which scans all ports in the host_set,
 	determines which queued command was active (if any), and calls
-	ata_host_intr(ap,qc).
+	ata_sff_host_intr(ap,qc).
 	</para>
 	<para>
-	Most legacy IDE drivers use ata_bmdma_irq_clear() for the
+	Most legacy IDE drivers use ata_sff_irq_clear() for the
 	irq_clear() hook, which simply clears the interrupt and error
 	flags in the DMA status register.
 	</para>
@@ -496,10 +483,6 @@ void (*host_stop) (struct ata_host_set *host_set);
 	data from port at this time.
 	</para>
 	<para>
-	Many drivers use ata_port_stop() as this hook, which frees the
-	PRD table.
-	</para>
-	<para>
 	->host_stop() is called after all ->port_stop() calls
 have completed.  The hook must finalize hardware shutdown, release DMA
 and other resources, etc.

Documentation/HOWTO

@@ -234,7 +234,7 @@ process is as follows:
     Linus, usually the patches that have already been included in the
     -next kernel for a few weeks.  The preferred way to submit big changes
     is using git (the kernel's source management tool, more information
-    can be found at http://git.or.cz/) but plain patches are also just
+    can be found at http://git-scm.com/) but plain patches are also just
     fine.
   - After two weeks a -rc1 kernel is released it is now possible to push
     only patches that do not include new features that could affect the

Documentation/cgroups/cgroups.txt

@@ -235,8 +235,7 @@ containing the following files describing that cgroup:
  - cgroup.procs: list of tgids in the cgroup.  This list is not
    guaranteed to be sorted or free of duplicate tgids, and userspace
    should sort/uniquify the list if this property is required.
-   Writing a tgid into this file moves all threads with that tgid into
+   This is a read-only file, for now.
-   this cgroup.
  - notify_on_release flag: run the release agent on exit?
  - release_agent: the path to use for release notifications (this file
    exists in the top cgroup only)

Documentation/feature-removal-schedule.txt

@@ -626,3 +626,26 @@ Files:	net/netfilter/xt_NOTRACK.c
 When:	April 2011
 Why:	Superseded by xt_CT
 Who:	Netfilter developer team <netfilter-devel@vger.kernel.org>
+
+---------------------------
+
+What:	video4linux /dev/vtx teletext API support
+When:	2.6.35
+Files:	drivers/media/video/saa5246a.c drivers/media/video/saa5249.c
+	include/linux/videotext.h
+Why:	The vtx device nodes have been superseded by vbi device nodes
+	for many years. No applications exist that use the vtx support.
+	Of the two i2c drivers that actually support this API the saa5249
+	has been impossible to use for a year now and no known hardware
+	that supports this device exists. The saa5246a is theoretically
+	supported by the old mxb boards, but it never actually worked.
+
+	In summary: there is no hardware that can use this API and there
+	are no applications actually implementing this API.
+
+	The vtx support still reserves minors 192-223 and we would really
+	like to reuse those for upcoming new functionality. In the unlikely
+	event that new hardware appears that wants to use the functionality
+	provided by the vtx API, then that functionality should be build
+	around the sliced VBI API instead.
+Who:	Hans Verkuil <hverkuil@xs4all.nl>

Documentation/filesystems/proc.txt

@@ -316,7 +316,7 @@ address           perms offset  dev   inode      pathname
 08049000-0804a000 rw-p 00001000 03:00 8312       /opt/test
 0804a000-0806b000 rw-p 00000000 00:00 0          [heap]
 a7cb1000-a7cb2000 ---p 00000000 00:00 0
-a7cb2000-a7eb2000 rw-p 00000000 00:00 0          [threadstack:001ff4b4]
+a7cb2000-a7eb2000 rw-p 00000000 00:00 0
 a7eb2000-a7eb3000 ---p 00000000 00:00 0
 a7eb3000-a7ed5000 rw-p 00000000 00:00 0
 a7ed5000-a8008000 r-xp 00000000 03:00 4222       /lib/libc.so.6
@@ -352,7 +352,6 @@ is not associated with a file:
  [stack]                  = the stack of the main process
  [vdso]                   = the "virtual dynamic shared object",
                             the kernel system call handler
- [threadstack:xxxxxxxx]   = the stack of the thread, xxxxxxxx is the stack size
 
  or if empty, the mapping is anonymous.
 

Documentation/i2c/writing-clients

@@ -74,6 +74,11 @@ structure at all.  You should use this to keep device-specific data.
 	/* retrieve the value */
 	void *i2c_get_clientdata(const struct i2c_client *client);
 
+Note that starting with kernel 2.6.34, you don't have to set the `data' field
+to NULL in remove() or if probe() failed anymore. The i2c-core does this
+automatically on these occasions. Those are also the only times the core will
+touch this field.
+
 
 Accessing the client
 ====================

Documentation/input/elantech.txt

@@ -333,14 +333,14 @@ byte 0:
 byte 1:
 
    bit   7   6   5   4   3   2   1   0
-        x15 x14 x13 x12 x11 x10 x9  x8
+         .   .   .   .   .  x10 x9  x8
 
 byte 2:
 
    bit   7   6   5   4   3   2   1   0
         x7  x6  x5  x4  x4  x2  x1  x0
 
-         x15..x0 = absolute x value (horizontal)
+         x10..x0 = absolute x value (horizontal)
 
 byte 3:
 
@@ -350,14 +350,14 @@ byte 3:
 byte 4:
 
    bit   7   6   5   4   3   2   1   0
-        y15 y14 y13 y12 y11 y10 y8  y8
+         .   .   .   .   .   .  y9  y8
 
 byte 5:
 
    bit   7   6   5   4   3   2   1   0
         y7  y6  y5  y4  y3  y2  y1  y0
 
-         y15..y0 = absolute y value (vertical)
+         y9..y0 = absolute y value (vertical)
 
 
 4.2.2 Two finger touch

Documentation/kernel-parameters.txt

@@ -1194,7 +1194,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	libata.force=	[LIBATA] Force configurations.  The format is comma
 			separated list of "[ID:]VAL" where ID is
-			PORT[:DEVICE].  PORT and DEVICE are decimal numbers
+			PORT[.DEVICE].  PORT and DEVICE are decimal numbers
 			matching port, link or device.  Basically, it matches
 			the ATA ID string printed on console by libata.  If
 			the whole ID part is omitted, the last PORT and DEVICE

Documentation/spi/spidev_test.c

@@ -58,7 +58,7 @@ static void transfer(int fd)
 	};
 
 	ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr);
-	if (ret == 1)
+	if (ret < 1)
 		pabort("can't send spi message");
 
 	for (ret = 0; ret < ARRAY_SIZE(tx); ret++) {

Documentation/stable_kernel_rules.txt

@@ -18,16 +18,15 @@ Rules on what kind of patches are accepted, and which ones are not, into the
  - It cannot contain any "trivial" fixes in it (spelling changes,
    whitespace cleanups, etc).
  - It must follow the Documentation/SubmittingPatches rules.
- - It or an equivalent fix must already exist in Linus' tree.  Quote the
+ - It or an equivalent fix must already exist in Linus' tree (upstream).
-   respective commit ID in Linus' tree in your patch submission to -stable.
 
 
 Procedure for submitting patches to the -stable tree:
 
  - Send the patch, after verifying that it follows the above rules, to
-   stable@kernel.org.
+   stable@kernel.org.  You must note the upstream commit ID in the changelog
- - To have the patch automatically included in the stable tree, add the
+   of your submission.
-   the tag
+ - To have the patch automatically included in the stable tree, add the tag
      Cc: stable@kernel.org
    in the sign-off area. Once the patch is merged it will be applied to
    the stable tree without anything else needing to be done by the author

MAINTAINERS

@@ -1961,7 +1961,7 @@ F:	lib/kobj*
 
 DRM DRIVERS
 M:	David Airlie <airlied@linux.ie>
-L:	dri-devel@lists.sourceforge.net
+L:	dri-devel@lists.freedesktop.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
 S:	Maintained
 F:	drivers/gpu/drm/
@@ -4482,17 +4482,17 @@ S:	Maintained
 F:	drivers/ata/sata_promise.*
 
 PS3 NETWORK SUPPORT
-M:	Geoff Levand <geoffrey.levand@am.sony.com>
+M:	Geoff Levand <geoff@infradead.org>
 L:	netdev@vger.kernel.org
 L:	cbe-oss-dev@ozlabs.org
-S:	Supported
+S:	Maintained
 F:	drivers/net/ps3_gelic_net.*
 
 PS3 PLATFORM SUPPORT
-M:	Geoff Levand <geoffrey.levand@am.sony.com>
+M:	Geoff Levand <geoff@infradead.org>
 L:	linuxppc-dev@ozlabs.org
 L:	cbe-oss-dev@ozlabs.org
-S:	Supported
+S:	Maintained
 F:	arch/powerpc/boot/ps3*
 F:	arch/powerpc/include/asm/lv1call.h
 F:	arch/powerpc/include/asm/ps3*.h
@@ -4791,12 +4791,11 @@ F:	drivers/s390/crypto/
 
 S390 ZFCP DRIVER
 M:	Christof Schmitt <christof.schmitt@de.ibm.com>
-M:	Martin Peschke <mp3@de.ibm.com>
+M:	Swen Schillig <swen@vnet.ibm.com>
 M:	linux390@de.ibm.com
 L:	linux-s390@vger.kernel.org
 W:	http://www.ibm.com/developerworks/linux/linux390/
 S:	Supported
-F:	Documentation/s390/zfcpdump.txt
 F:	drivers/s390/scsi/zfcp_*
 
 S390 IUCV NETWORK LAYER

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 34
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc7
 NAME = Sheep on Meth
 
 # *DOCUMENTATION*

arch/arm/Kconfig

@@ -253,6 +253,7 @@ config ARCH_REALVIEW
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select GPIO_PL061 if GPIOLIB
 	help
 	  This enables support for ARM Ltd RealView boards.
 

arch/arm/boot/compressed/head.S

@@ -685,8 +685,8 @@ proc_types:
 		W(b)	__armv4_mmu_cache_off
 		W(b)	__armv4_mmu_cache_flush
 
-		.word	0x56056930
+		.word	0x56056900
-		.word	0xff0ffff0		@ PXA935
+		.word	0xffffff00		@ PXA9xx
 		W(b)	__armv4_mmu_cache_on
 		W(b)	__armv4_mmu_cache_off
 		W(b)	__armv4_mmu_cache_flush
@@ -697,12 +697,6 @@ proc_types:
 		W(b)	__armv4_mmu_cache_off
 		W(b)	__armv5tej_mmu_cache_flush
 
-		.word	0x56056930
-		.word	0xff0ffff0		@ PXA935
-		W(b)	__armv4_mmu_cache_on
-		W(b)	__armv4_mmu_cache_off
-		W(b)	__armv4_mmu_cache_flush
-
 		.word	0x56050000		@ Feroceon
 		.word	0xff0f0000
 		W(b)	__armv4_mmu_cache_on

arch/arm/configs/bcmring_defconfig

@@ -1,13 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3
+# Linux kernel version: 2.6.34-rc2
-# Fri Jul 17 12:07:28 2009
+# Mon Mar 29 12:01:41 2010
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
+CONFIG_HAVE_PROC_CPU=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,6 +18,7 @@ CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -32,6 +33,12 @@ CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -43,21 +50,22 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
+CONFIG_TREE_RCU=y
-# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -75,19 +83,21 @@ CONFIG_FUTEX=y
 # CONFIG_EVENTFD is not set
 CONFIG_SHMEM=y
 # CONFIG_AIO is not set
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_PERF_COUNTERS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
@@ -115,24 +125,53 @@ CONFIG_LBDAF=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
+CONFIG_ARCH_BCMRING=y
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
@@ -149,6 +188,7 @@ CONFIG_DEFAULT_IOSCHED="noop"
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
 # CONFIG_ARCH_KIRKWOOD is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
@@ -157,19 +197,26 @@ CONFIG_DEFAULT_IOSCHED="noop"
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5PV210 is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-CONFIG_ARCH_BCMRING=y
 # CONFIG_ARCH_FPGA11107 is not set
 CONFIG_ARCH_BCM11107=y
 
@@ -185,7 +232,7 @@ CONFIG_CPU_V6=y
 CONFIG_CPU_32v6K=y
 CONFIG_CPU_32v6=y
 CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_V6=y
 CONFIG_CPU_CACHE_V6=y
 CONFIG_CPU_CACHE_VIPT=y
 CONFIG_CPU_COPY_V6=y
@@ -201,6 +248,8 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_CPU_HAS_PMU=y
 # CONFIG_ARM_ERRATA_411920 is not set
 CONFIG_COMMON_CLKDEV=y
 
@@ -222,6 +271,8 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
@@ -229,6 +280,7 @@ CONFIG_AEABI=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
+CONFIG_HW_PERF_EVENTS=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -240,8 +292,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
+# CONFIG_KSM is not set
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
 CONFIG_UACCESS_WITH_MEMCPY=y
@@ -335,9 +386,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
@@ -433,6 +484,10 @@ CONFIG_MTD_NAND_BCM_UMI_HWCS=y
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
@@ -444,6 +499,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -452,6 +508,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_NETDEVICES is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -459,6 +516,7 @@ CONFIG_HAVE_IDE=y
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -508,6 +566,7 @@ CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -519,13 +578,17 @@ CONFIG_LEGACY_PTY_COUNT=64
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -541,6 +604,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
 #
@@ -566,14 +630,17 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -589,9 +656,12 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 # CONFIG_FILE_LOCKING is not set
 # CONFIG_FSNOTIFY is not set
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -647,6 +717,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -657,7 +728,6 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
@@ -675,11 +745,12 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 CONFIG_HEADERS_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -693,6 +764,7 @@ CONFIG_TRACING_SUPPORT=y
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_ARM_UNWIND is not set
 # CONFIG_DEBUG_USER is not set
+# CONFIG_OC_ETM is not set
 
 #
 # Security options
@@ -700,7 +772,11 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 # CONFIG_CRYPTO is not set
 # CONFIG_BINARY_PRINTF is not set
 

arch/arm/configs/imote2_defconfig

@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc8
+# Linux kernel version: 2.6.34-rc2
-# Sat Feb 13 21:48:53 2010
+# Thu Apr  8 14:49:08 2010
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_HAVE_PROC_CPU=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -19,6 +20,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_ARCH_HAS_CPUFREQ=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_ARCH_MTD_XIP=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
@@ -60,11 +62,6 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -97,10 +94,14 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
 
 #
 # Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
@@ -184,6 +185,7 @@ CONFIG_MMU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
@@ -193,7 +195,6 @@ CONFIG_MMU=y
 # CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -210,21 +211,26 @@ CONFIG_MMU=y
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
 # CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
 # CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5P6442 is not set
 # CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5PV210 is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
 
 #
 # Intel PXA2xx/PXA3xx Implementations
@@ -253,6 +259,7 @@ CONFIG_ARCH_PXA=y
 # CONFIG_MACH_EM_X270 is not set
 # CONFIG_MACH_EXEDA is not set
 # CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_CAPC7117 is not set
 # CONFIG_ARCH_GUMSTIX is not set
 CONFIG_MACH_INTELMOTE2=y
 # CONFIG_MACH_STARGATE2 is not set
@@ -275,7 +282,11 @@ CONFIG_MACH_INTELMOTE2=y
 # CONFIG_PXA_EZX is not set
 # CONFIG_MACH_MP900C is not set
 # CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_MACH_RAUMFELD_RC is not set
+# CONFIG_MACH_RAUMFELD_CONNECTOR is not set
+# CONFIG_MACH_RAUMFELD_SPEAKER is not set
 # CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_ICONTROL is not set
 # CONFIG_ARCH_PXA_ESERIES is not set
 CONFIG_PXA27x=y
 CONFIG_PXA_SSP=y
@@ -302,6 +313,7 @@ CONFIG_ARM_THUMB=y
 CONFIG_ARM_L1_CACHE_SHIFT=5
 CONFIG_IWMMXT=y
 CONFIG_XSCALE_PMU=y
+CONFIG_CPU_HAS_PMU=y
 CONFIG_COMMON_CLKDEV=y
 
 #
@@ -352,7 +364,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS2,115200 mem=32M"
 # CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
 CONFIG_ATAGS_PROC=y
@@ -360,24 +372,8 @@ CONFIG_ATAGS_PROC=y
 #
 # CPU Power Management
 #
-CONFIG_CPU_FREQ=y
+# CONFIG_CPU_FREQ is not set
-CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_IDLE is not set
-CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
 
 #
 # Floating point emulation
@@ -409,6 +405,7 @@ CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
 CONFIG_PM_RUNTIME=y
+CONFIG_PM_OPS=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
@@ -416,7 +413,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -506,6 +502,7 @@ CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
 CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_LED=m
@@ -622,6 +619,7 @@ CONFIG_IP6_NF_RAW=m
 # CONFIG_ATM is not set
 CONFIG_STP=m
 CONFIG_BRIDGE=m
+# CONFIG_BRIDGE_IGMP_SNOOPING is not set
 # CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
@@ -646,32 +644,7 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
-CONFIG_BT=y
+# CONFIG_BT is not set
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=y
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIBTSDIO=m
-CONFIG_BT_HCIUART=y
-CONFIG_BT_HCIUART_H4=y
-# CONFIG_BT_HCIUART_BCSP is not set
-# CONFIG_BT_HCIUART_LL is not set
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_BT_MRVL=m
-CONFIG_BT_MRVL_SDIO=m
-# CONFIG_BT_ATH3K is not set
 # CONFIG_AF_RXRPC is not set
 CONFIG_FIB_RULES=y
 # CONFIG_WIRELESS is not set
@@ -687,7 +660,8 @@ CONFIG_FIB_RULES=y
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
@@ -703,9 +677,9 @@ CONFIG_MTD=y
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
+CONFIG_MTD_AFS_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
+CONFIG_MTD_AR7_PARTS=y
 
 #
 # User Modules And Translation Layers
@@ -812,6 +786,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -965,6 +940,7 @@ CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -993,6 +969,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_PXA=y
 # CONFIG_I2C_PXA_SLAVE is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -1006,15 +983,9 @@ CONFIG_I2C_PXA=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 # CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
@@ -1046,10 +1017,12 @@ CONFIG_GPIO_SYSFS=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
@@ -1093,10 +1066,12 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
@@ -1105,22 +1080,25 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TC6393XB is not set
 CONFIG_PMIC_DA903X=y
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
 # CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_DEBUG=y
+# CONFIG_REGULATOR_DUMMY is not set
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
 CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
 CONFIG_REGULATOR_USERSPACE_CONSUMER=y
 # CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
 # CONFIG_REGULATOR_MAX8660 is not set
 CONFIG_REGULATOR_DA903X=y
 # CONFIG_REGULATOR_LP3971 is not set
@@ -1218,6 +1196,7 @@ CONFIG_VIDEO_IR_I2C=y
 # CONFIG_VIDEO_SAA7191 is not set
 # CONFIG_VIDEO_TVP514X is not set
 # CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_TVP7002 is not set
 # CONFIG_VIDEO_VPX3220 is not set
 
 #
@@ -1264,15 +1243,7 @@ CONFIG_SOC_CAMERA_MT9M111=y
 CONFIG_VIDEO_PXA27x=y
 # CONFIG_VIDEO_SH_MOBILE_CEU is not set
 # CONFIG_V4L_USB_DRIVERS is not set
-CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_I2C_SI4713 is not set
-# CONFIG_RADIO_SI4713 is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_RADIO_SI470X is not set
-# CONFIG_USB_MR800 is not set
-CONFIG_RADIO_TEA5764=y
-CONFIG_RADIO_TEA5764_XTAL=y
-# CONFIG_RADIO_TEF6862 is not set
 # CONFIG_DAB is not set
 
 #
@@ -1398,8 +1369,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_APPLE=m
-# CONFIG_HID_WACOM is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1477,7 +1446,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1489,7 +1457,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -1529,6 +1496,7 @@ CONFIG_USB_ETH=y
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
 # CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
 # CONFIG_USB_G_MULTI is not set
 
 #
@@ -1555,8 +1523,6 @@ CONFIG_SDIO_UART=m
 #
 CONFIG_MMC_PXA=y
 # CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_SPI=y
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
@@ -1574,11 +1540,11 @@ CONFIG_LEDS_LP3944=y
 # CONFIG_LEDS_REGULATOR is not set
 # CONFIG_LEDS_BD2802 is not set
 # CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
 
 #
 # LED Triggers
 #
-CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_BACKLIGHT=y
@@ -1656,7 +1622,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 # CONFIG_RTC_DRV_SA1100 is not set
-# CONFIG_RTC_DRV_PXA is not set
+CONFIG_RTC_DRV_PXA=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
@@ -1681,19 +1647,10 @@ CONFIG_EXT3_FS_XATTR=y
 CONFIG_JBD=m
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=m
-CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_FS is not set
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
+# CONFIG_XFS_FS is not set
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
 # CONFIG_NILFS2_FS is not set
@@ -1716,9 +1673,7 @@ CONFIG_CUSE=m
 #
 # CD-ROM/DVD Filesystems
 #
-CONFIG_ISO9660_FS=m
+# CONFIG_ISO9660_FS is not set
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
 # CONFIG_UDF_FS is not set
 
 #
@@ -1750,12 +1705,14 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
-# CONFIG_JFFS2_SUMMARY is not set
+CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
@@ -1765,6 +1722,7 @@ CONFIG_JFFS2_RUBIN=y
 CONFIG_JFFS2_CMODE_PRIORITY=y
 # CONFIG_JFFS2_CMODE_SIZE is not set
 # CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=m
 CONFIG_SQUASHFS=m
 # CONFIG_SQUASHFS_EMBEDDED is not set
@@ -1802,6 +1760,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CEPH_FS is not set
 CONFIG_CIFS=m
 CONFIG_CIFS_STATS=y
 # CONFIG_CIFS_STATS2 is not set
@@ -1895,6 +1854,7 @@ CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
 CONFIG_DEBUG_LOCK_ALLOC=y
 CONFIG_PROVE_LOCKING=y
+# CONFIG_PROVE_RCU is not set
 CONFIG_LOCKDEP=y
 # CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_LOCKDEP is not set
@@ -1918,6 +1878,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
@@ -2061,9 +2022,9 @@ CONFIG_CRC32=y
 CONFIG_CRC7=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
+CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=m
+CONFIG_LZO_DECOMPRESS=y
 CONFIG_DECOMPRESS_GZIP=y
 CONFIG_DECOMPRESS_BZIP2=y
 CONFIG_DECOMPRESS_LZMA=y
@@ -2075,3 +2036,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y

arch/arm/configs/n8x0_defconfig

@@ -1058,7 +1058,6 @@ CONFIG_JFFS2_CMODE_PRIORITY=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set

arch/arm/configs/omap_zoom2_defconfig

@@ -661,7 +661,7 @@ CONFIG_DEVKMEM=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y

arch/arm/configs/omap_zoom3_defconfig

@@ -680,7 +680,7 @@ CONFIG_DEVKMEM=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y

arch/arm/configs/rx51_defconfig

@@ -59,8 +59,6 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -480,7 +478,6 @@ CONFIG_BT_HIDP=m
 # CONFIG_BT_HCIBFUSB is not set
 # CONFIG_BT_HCIVHCI is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
 # CONFIG_CFG80211_REG_DEBUG is not set

arch/arm/include/asm/assembler.h

@@ -149,10 +149,10 @@
 
 #define USER(x...)				\
 9999:	x;					\
-	.section __ex_table,"a";		\
+	.pushsection __ex_table,"a";		\
 	.align	3;				\
 	.long	9999b,9001f;			\
-	.previous
+	.popsection
 
 /*
  * SMP data memory barrier
@@ -193,10 +193,10 @@
 	.error	"Unsupported inc macro argument"
 	.endif
 
-	.section __ex_table,"a"
+	.pushsection __ex_table,"a"
 	.align	3
 	.long	9999b, \abort
-	.previous
+	.popsection
 	.endm
 
 	.macro	usracc, instr, reg, ptr, inc, cond, rept, abort
@@ -234,10 +234,10 @@
 	.error	"Unsupported inc macro argument"
 	.endif
 
-	.section __ex_table,"a"
+	.pushsection __ex_table,"a"
 	.align	3
 	.long	9999b, \abort
-	.previous
+	.popsection
 	.endr
 	.endm
 

arch/arm/include/asm/elf.h

@@ -9,6 +9,8 @@
 #include <asm/ptrace.h>
 #include <asm/user.h>
 
+struct task_struct;
+
 typedef unsigned long elf_greg_t;
 typedef unsigned long elf_freg_t[3];
 

arch/arm/include/asm/futex.h

@@ -21,14 +21,14 @@
 	"2:	strt	%0, [%2]\n"				\
 	"	mov	%0, #0\n"				\
 	"3:\n"							\
-	"	.section __ex_table,\"a\"\n"			\
+	"	.pushsection __ex_table,\"a\"\n"		\
 	"	.align	3\n"					\
 	"	.long	1b, 4f, 2b, 4f\n"			\
-	"	.previous\n"					\
+	"	.popsection\n"					\
-	"	.section .fixup,\"ax\"\n"			\
+	"	.pushsection .fixup,\"ax\"\n"			\
 	"4:	mov	%0, %4\n"				\
 	"	b	3b\n"					\
-	"	.previous"					\
+	"	.popsection"					\
 	: "=&r" (ret), "=&r" (oldval)				\
 	: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT)		\
 	: "cc", "memory")
@@ -102,14 +102,14 @@ futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
 	"	it	eq	@ explicit IT needed for the 2b label\n"
 	"2:	streqt	%2, [%3]\n"
 	"3:\n"
-	"	.section __ex_table,\"a\"\n"
+	"	.pushsection __ex_table,\"a\"\n"
 	"	.align	3\n"
 	"	.long	1b, 4f, 2b, 4f\n"
-	"	.previous\n"
+	"	.popsection\n"
-	"	.section .fixup,\"ax\"\n"
+	"	.pushsection .fixup,\"ax\"\n"
 	"4:	mov	%0, %4\n"
 	"	b	3b\n"
-	"	.previous"
+	"	.popsection"
 	: "=&r" (val)
 	: "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT)
 	: "cc", "memory");

arch/arm/include/asm/uaccess.h

@@ -229,16 +229,16 @@ do {									\
 	__asm__ __volatile__(					\
 	"1:	ldrbt	%1,[%2]\n"				\
 	"2:\n"							\
-	"	.section .fixup,\"ax\"\n"			\
+	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
 	"3:	mov	%0, %3\n"				\
 	"	mov	%1, #0\n"				\
 	"	b	2b\n"					\
-	"	.previous\n"					\
+	"	.popsection\n"					\
-	"	.section __ex_table,\"a\"\n"			\
+	"	.pushsection __ex_table,\"a\"\n"		\
 	"	.align	3\n"					\
 	"	.long	1b, 3b\n"				\
-	"	.previous"					\
+	"	.popsection"					\
 	: "+r" (err), "=&r" (x)					\
 	: "r" (addr), "i" (-EFAULT)				\
 	: "cc")
@@ -265,16 +265,16 @@ do {									\
 	__asm__ __volatile__(					\
 	"1:	ldrt	%1,[%2]\n"				\
 	"2:\n"							\
-	"	.section .fixup,\"ax\"\n"			\
+	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
 	"3:	mov	%0, %3\n"				\
 	"	mov	%1, #0\n"				\
 	"	b	2b\n"					\
-	"	.previous\n"					\
+	"	.popsection\n"					\
-	"	.section __ex_table,\"a\"\n"			\
+	"	.pushsection __ex_table,\"a\"\n"		\
 	"	.align	3\n"					\
 	"	.long	1b, 3b\n"				\
-	"	.previous"					\
+	"	.popsection"					\
 	: "+r" (err), "=&r" (x)					\
 	: "r" (addr), "i" (-EFAULT)				\
 	: "cc")
@@ -310,15 +310,15 @@ do {									\
 	__asm__ __volatile__(					\
 	"1:	strbt	%1,[%2]\n"				\
 	"2:\n"							\
-	"	.section .fixup,\"ax\"\n"			\
+	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
 	"3:	mov	%0, %3\n"				\
 	"	b	2b\n"					\
-	"	.previous\n"					\
+	"	.popsection\n"					\
-	"	.section __ex_table,\"a\"\n"			\
+	"	.pushsection __ex_table,\"a\"\n"		\
 	"	.align	3\n"					\
 	"	.long	1b, 3b\n"				\
-	"	.previous"					\
+	"	.popsection"					\
 	: "+r" (err)						\
 	: "r" (x), "r" (__pu_addr), "i" (-EFAULT)		\
 	: "cc")
@@ -343,15 +343,15 @@ do {									\
 	__asm__ __volatile__(					\
 	"1:	strt	%1,[%2]\n"				\
 	"2:\n"							\
-	"	.section .fixup,\"ax\"\n"			\
+	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
 	"3:	mov	%0, %3\n"				\
 	"	b	2b\n"					\
-	"	.previous\n"					\
+	"	.popsection\n"					\
-	"	.section __ex_table,\"a\"\n"			\
+	"	.pushsection __ex_table,\"a\"\n"		\
 	"	.align	3\n"					\
 	"	.long	1b, 3b\n"				\
-	"	.previous"					\
+	"	.popsection"					\
 	: "+r" (err)						\
 	: "r" (x), "r" (__pu_addr), "i" (-EFAULT)		\
 	: "cc")
@@ -371,16 +371,16 @@ do {									\
  THUMB(	"1:	strt	" __reg_oper1 ", [%1]\n"	)	\
  THUMB(	"2:	strt	" __reg_oper0 ", [%1, #4]\n"	)	\
 	"3:\n"							\
-	"	.section .fixup,\"ax\"\n"			\
+	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
 	"4:	mov	%0, %3\n"				\
 	"	b	3b\n"					\
-	"	.previous\n"					\
+	"	.popsection\n"					\
-	"	.section __ex_table,\"a\"\n"			\
+	"	.pushsection __ex_table,\"a\"\n"		\
 	"	.align	3\n"					\
 	"	.long	1b, 4b\n"				\
 	"	.long	2b, 4b\n"				\
-	"	.previous"					\
+	"	.popsection"					\
 	: "+r" (err), "+r" (__pu_addr)				\
 	: "r" (x), "i" (-EFAULT)				\
 	: "cc")

arch/arm/kernel/entry-armv.S

@@ -523,16 +523,16 @@ ENDPROC(__und_usr)
 /*
  * The out of line fixup for the ldrt above.
  */
-	.section .fixup, "ax"
+	.pushsection .fixup, "ax"
 4:	mov	pc, r9
-	.previous
+	.popsection
-	.section __ex_table,"a"
+	.pushsection __ex_table,"a"
 	.long	1b, 4b
 #if __LINUX_ARM_ARCH__ >= 7
 	.long	2b, 4b
 	.long	3b, 4b
 #endif
-	.previous
+	.popsection
 
 /*
  * Check whether the instruction is a co-processor instruction.
@@ -676,10 +676,10 @@ do_fpe:
  *  lr  = unrecognised FP instruction return address
  */
 
-	.data
+	.pushsection .data
 ENTRY(fp_enter)
 	.word	no_fp
-	.previous
+	.popsection
 
 ENTRY(no_fp)
 	mov	pc, lr

arch/arm/kernel/ftrace.c

@@ -62,15 +62,15 @@ int ftrace_modify_code(unsigned long pc, unsigned char *old_code,
 		"    movne  %0, #2    \n"
 		"3:\n"
 
-		".section .fixup, \"ax\"\n"
+		".pushsection .fixup, \"ax\"\n"
 		"4:  mov  %0, #1  \n"
 		"    b    3b      \n"
-		".previous\n"
+		".popsection\n"
 
-		".section __ex_table, \"a\"\n"
+		".pushsection __ex_table, \"a\"\n"
 		"    .long 1b, 4b \n"
 		"    .long 2b, 4b \n"
-		".previous\n"
+		".popsection\n"
 
 		: "=r"(err), "=r"(replaced)
 		: "r"(pc), "r"(new), "r"(old), "0"(err), "1"(replaced)

arch/arm/kernel/process.c

@@ -355,7 +355,7 @@ EXPORT_SYMBOL(dump_fpu);
  * the thread function, and r3 points to the exit function.
  */
 extern void kernel_thread_helper(void);
-asm(	".section .text\n"
+asm(	".pushsection .text\n"
 "	.align\n"
 "	.type	kernel_thread_helper, #function\n"
 "kernel_thread_helper:\n"
@@ -363,11 +363,11 @@ asm(	".section .text\n"
 "	mov	lr, r3\n"
 "	mov	pc, r2\n"
 "	.size	kernel_thread_helper, . - kernel_thread_helper\n"
-"	.previous");
+"	.popsection");
 
 #ifdef CONFIG_ARM_UNWIND
 extern void kernel_thread_exit(long code);
-asm(	".section .text\n"
+asm(	".pushsection .text\n"
 "	.align\n"
 "	.type	kernel_thread_exit, #function\n"
 "kernel_thread_exit:\n"
@@ -377,7 +377,7 @@ asm(	".section .text\n"
 "	nop\n"
 "	.fnend\n"
 "	.size	kernel_thread_exit, . - kernel_thread_exit\n"
-"	.previous");
+"	.popsection");
 #else
 #define kernel_thread_exit	do_exit
 #endif

arch/arm/kernel/smp.c

@@ -86,6 +86,12 @@ int __cpuinit __cpu_up(unsigned int cpu)
 			return PTR_ERR(idle);
 		}
 		ci->idle = idle;
+	} else {
+		/*
+		 * Since this idle thread is being re-used, call
+		 * init_idle() to reinitialize the thread structure.
+		 */
+		init_idle(idle, cpu);
 	}
 
 	/*

arch/arm/lib/backtrace.S

@@ -110,13 +110,13 @@ no_frame:	ldmfd	sp!, {r4 - r8, pc}
 ENDPROC(__backtrace)
 ENDPROC(c_backtrace)
 		
-		.section __ex_table,"a"
+		.pushsection __ex_table,"a"
 		.align	3
 		.long	1001b, 1006b
 		.long	1002b, 1006b
 		.long	1003b, 1006b
 		.long	1004b, 1006b
-		.previous
+		.popsection
 
 #define instr r4
 #define reg   r5

arch/arm/lib/clear_user.S

@@ -46,8 +46,8 @@ USER(		strnebt	r2, [r0])
 		ldmfd	sp!, {r1, pc}
 ENDPROC(__clear_user)
 
-		.section .fixup,"ax"
+		.pushsection .fixup,"ax"
 		.align	0
 9001:		ldmfd	sp!, {r0, pc}
-		.previous
+		.popsection
 

arch/arm/lib/copy_from_user.S

@@ -90,7 +90,7 @@ ENTRY(__copy_from_user)
 
 ENDPROC(__copy_from_user)
 
-	.section .fixup,"ax"
+	.pushsection .fixup,"ax"
 	.align 0
 	copy_abort_preamble
 	ldmfd	sp!, {r1, r2}
@@ -100,5 +100,5 @@ ENDPROC(__copy_from_user)
 	bl	__memzero
 	ldr	r0, [sp], #4
 	copy_abort_end
-	.previous
+	.popsection
 

arch/arm/lib/copy_to_user.S

@@ -94,12 +94,12 @@ WEAK(__copy_to_user)
 
 ENDPROC(__copy_to_user)
 
-	.section .fixup,"ax"
+	.pushsection .fixup,"ax"
 	.align 0
 	copy_abort_preamble
 	ldmfd	sp!, {r1, r2, r3}
 	sub	r0, r0, r1
 	rsb	r0, r0, r2
 	copy_abort_end
-	.previous
+	.popsection
 

arch/arm/lib/csumpartialcopyuser.S

@@ -68,7 +68,7 @@
  * so properly, we would have to add in whatever registers were loaded before
  * the fault, which, with the current asm above is not predictable.
  */
-		.section .fixup,"ax"
+		.pushsection .fixup,"ax"
 		.align	4
 9001:		mov	r4, #-EFAULT
 		ldr	r5, [fp, #4]		@ *err_ptr
@@ -80,4 +80,4 @@
 		strneb	r0, [r1], #1
 		bne	9002b
 		load_regs
-		.previous
+		.popsection

arch/arm/lib/getuser.S

@@ -64,9 +64,9 @@ __get_user_bad:
 	mov	pc, lr
 ENDPROC(__get_user_bad)
 
-.section __ex_table, "a"
+.pushsection __ex_table, "a"
 	.long	1b, __get_user_bad
 	.long	2b, __get_user_bad
 	.long	3b, __get_user_bad
 	.long	4b, __get_user_bad
-.previous
+.popsection

arch/arm/lib/putuser.S

@@ -81,11 +81,11 @@ __put_user_bad:
 	mov	pc, lr
 ENDPROC(__put_user_bad)
 
-.section __ex_table, "a"
+.pushsection __ex_table, "a"
 	.long	1b, __put_user_bad
 	.long	2b, __put_user_bad
 	.long	3b, __put_user_bad
 	.long	4b, __put_user_bad
 	.long	5b, __put_user_bad
 	.long	6b, __put_user_bad
-.previous
+.popsection

arch/arm/lib/strncpy_from_user.S

@@ -33,11 +33,11 @@ ENTRY(__strncpy_from_user)
 	mov	pc, lr
 ENDPROC(__strncpy_from_user)
 
-	.section .fixup,"ax"
+	.pushsection .fixup,"ax"
 	.align	0
 9001:	mov	r3, #0
 	strb	r3, [r0, #0]	@ null terminate
 	mov	r0, #-EFAULT
 	mov	pc, lr
-	.previous
+	.popsection
 

arch/arm/lib/strnlen_user.S

@@ -33,8 +33,8 @@ ENTRY(__strnlen_user)
 	mov	pc, lr
 ENDPROC(__strnlen_user)
 
-	.section .fixup,"ax"
+	.pushsection .fixup,"ax"
 	.align	0
 9001:	mov	r0, #0
 	mov	pc, lr
-	.previous
+	.popsection

arch/arm/lib/uaccess.S

@@ -279,10 +279,10 @@ USER(		strgtbt	r3, [r0], #1)			@ May fault
 		b	.Lc2u_finished
 ENDPROC(__copy_to_user)
 
-		.section .fixup,"ax"
+		.pushsection .fixup,"ax"
 		.align	0
 9001:		ldmfd	sp!, {r0, r4 - r7, pc}
-		.previous
+		.popsection
 
 /* Prototype: unsigned long __copy_from_user(void *to,const void *from,unsigned long n);
  * Purpose  : copy a block from user memory to kernel memory
@@ -545,7 +545,7 @@ USER(		ldrgtbt	r3, [r1], #1)			@ May fault
 		b	.Lcfu_finished
 ENDPROC(__copy_from_user)
 
-		.section .fixup,"ax"
+		.pushsection .fixup,"ax"
 		.align	0
 		/*
 		 * We took an exception.  r0 contains a pointer to
@@ -559,5 +559,5 @@ ENDPROC(__copy_from_user)
 		blne	__memzero
 		mov	r0, r4
 		ldmfd	sp!, {r4 - r7, pc}
-		.previous
+		.popsection
 

arch/arm/mach-mx5/clock-mx51.c

@@ -16,6 +16,7 @@
 #include <linux/io.h>
 
 #include <asm/clkdev.h>
+#include <asm/div64.h>
 
 #include <mach/hardware.h>
 #include <mach/common.h>

arch/arm/mach-omap1/timer32k.c

@@ -68,12 +68,6 @@ struct sys_timer omap_timer;
  * ---------------------------------------------------------------------------
  */
 
-#if defined(CONFIG_ARCH_OMAP16XX)
-#define TIMER_32K_SYNCHRONIZED		0xfffbc410
-#else
-#error OMAP 32KHz timer does not currently work on 15XX!
-#endif
-
 /* 16xx specific defines */
 #define OMAP1_32K_TIMER_BASE		0xfffb9000
 #define OMAP1_32K_TIMER_CR		0x08
@@ -150,15 +144,6 @@ static struct clock_event_device clockevent_32k_timer = {
 	.set_mode	= omap_32k_timer_set_mode,
 };
 
-/*
- * The 32KHz synchronized timer is an additional timer on 16xx.
- * It is always running.
- */
-static inline unsigned long omap_32k_sync_timer_read(void)
-{
-	return omap_readl(TIMER_32K_SYNCHRONIZED);
-}
-
 static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id)
 {
 	struct clock_event_device *evt = &clockevent_32k_timer;

arch/arm/mach-omap2/Kconfig

@@ -59,8 +59,10 @@ config MACH_OMAP3_BEAGLE
 	select OMAP_PACKAGE_CBB
 
 config MACH_DEVKIT8000
-        bool "DEVKIT8000 board"
+	bool "DEVKIT8000 board"
-        depends on ARCH_OMAP3
+	depends on ARCH_OMAP3
+	select OMAP_PACKAGE_CUS
+	select OMAP_MUX
 
 config MACH_OMAP_LDP
 	bool "OMAP3 LDP board"

arch/arm/mach-omap2/board-3630sdp.c

@@ -96,6 +96,7 @@ static struct omap_board_mux board_mux[] __initdata = {
 static void __init omap_sdp_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
+	omap_serial_init();
 	zoom_peripherals_init();
 	board_smc91x_init();
 	enable_board_wakeup_source();

arch/arm/mach-omap2/board-am3517evm.c

@@ -294,9 +294,9 @@ static struct omap_board_mux board_mux[] __initdata = {
 
 static void __init am3517_evm_init(void)
 {
-	am3517_evm_i2c_init();
-
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+
+	am3517_evm_i2c_init();
 	platform_add_devices(am3517_evm_devices,
 				ARRAY_SIZE(am3517_evm_devices));
 

arch/arm/mach-omap2/board-devkit8000.c

@@ -50,7 +50,6 @@
 #include <linux/input/matrix_keypad.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
-#include <linux/usb/otg.h>
 #include <linux/dm9000.h>
 #include <linux/interrupt.h>
 
@@ -269,20 +268,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
 	devkit8000_vmmc1_supply.dev = mmc[0].dev;
 	devkit8000_vsim_supply.dev = mmc[0].dev;
 
-	/* REVISIT: need ehci-omap hooks for external VBUS
-	 * power switch and overcurrent detect
-	 */
-
-	gpio_request(gpio + 1, "EHCI_nOC");
-	gpio_direction_input(gpio + 1);
-
-	/* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
-	gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
-	gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1);
-
-	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
-	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
-
 	return 0;
 }
 
@@ -303,7 +288,7 @@ static struct regulator_consumer_supply devkit8000_vpll2_supplies[] = {
 	.dev		= &devkit8000_lcd_device.dev,
 	},
 	{
-	.supply		= "vdss_dsi",
+	.supply		= "vdds_dsi",
 	.dev		= &devkit8000_dss_device.dev,
 	}
 };
@@ -639,17 +624,21 @@ static struct omap_musb_board_data musb_board_data = {
 static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
 	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = -EINVAL,
-	.reset_gpio_port[1]  = 147,
+	.reset_gpio_port[1]  = -EINVAL,
 	.reset_gpio_port[2]  = -EINVAL
 };
 
 static void __init devkit8000_init(void)
 {
+	omap_serial_init();
+
+	omap_dm9000_init();
+
 	devkit8000_i2c_init();
 	platform_add_devices(devkit8000_devices,
 			ARRAY_SIZE(devkit8000_devices));
@@ -659,25 +648,15 @@ static void __init devkit8000_init(void)
 	spi_register_board_info(devkit8000_spi_board_info,
 	ARRAY_SIZE(devkit8000_spi_board_info));
 
-	omap_serial_init();
-
-	omap_dm9000_init();
-
 	devkit8000_ads7846_init();
 
-	omap_mux_init_gpio(170, OMAP_PIN_INPUT);
-
-	gpio_request(170, "DVI_nPD");
-	/* REVISIT leave DVI powered down until it's needed ... */
-	gpio_direction_output(170, true);
-
 	usb_musb_init(&musb_board_data);
 	usb_ehci_init(&ehci_pdata);
 	devkit8000_flash_init();
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
-	omap_mux_init_signal("sdr_cke0", OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
-	omap_mux_init_signal("sdr_cke1", OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
 }
 
 static void __init devkit8000_map_io(void)

arch/arm/mach-omap2/board-igep0020.c

@@ -458,13 +458,13 @@ static struct omap_musb_board_data musb_board_data = {
 };
 
 static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
 	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
 
 	.phy_reset = true,
-	.reset_gpio_port[0] = -EINVAL,
+	.reset_gpio_port[0] = IGEP2_GPIO_USBH_NRESET,
-	.reset_gpio_port[1] = IGEP2_GPIO_USBH_NRESET,
+	.reset_gpio_port[1] = -EINVAL,
 	.reset_gpio_port[2] = -EINVAL,
 };
 

arch/arm/mach-omap2/board-n8x0.c

@@ -216,7 +216,7 @@ static void __init n8x0_onenand_init(void) {}
  */
 #define N8X0_SLOT_SWITCH_GPIO	96
 #define N810_EMMC_VSD_GPIO	23
-#define NN810_EMMC_VIO_GPIO	9
+#define N810_EMMC_VIO_GPIO	9
 
 static int n8x0_mmc_switch_slot(struct device *dev, int slot)
 {
@@ -304,10 +304,10 @@ static void n810_set_power_emmc(struct device *dev,
 	if (power_on) {
 		gpio_set_value(N810_EMMC_VSD_GPIO, 1);
 		msleep(1);
-		gpio_set_value(NN810_EMMC_VIO_GPIO, 1);
+		gpio_set_value(N810_EMMC_VIO_GPIO, 1);
 		msleep(1);
 	} else {
-		gpio_set_value(NN810_EMMC_VIO_GPIO, 0);
+		gpio_set_value(N810_EMMC_VIO_GPIO, 0);
 		msleep(50);
 		gpio_set_value(N810_EMMC_VSD_GPIO, 0);
 		msleep(50);
@@ -468,7 +468,7 @@ static void n8x0_mmc_cleanup(struct device *dev)
 
 	if (machine_is_nokia_n810()) {
 		gpio_free(N810_EMMC_VSD_GPIO);
-		gpio_free(NN810_EMMC_VIO_GPIO);
+		gpio_free(N810_EMMC_VIO_GPIO);
 	}
 }
 
@@ -529,7 +529,7 @@ void __init n8x0_mmc_init(void)
 
 	err = gpio_request(N8X0_SLOT_SWITCH_GPIO, "MMC slot switch");
 	if (err)
-		return err;
+		return;
 
 	gpio_direction_output(N8X0_SLOT_SWITCH_GPIO, 0);
 
@@ -537,17 +537,17 @@ void __init n8x0_mmc_init(void)
 		err = gpio_request(N810_EMMC_VSD_GPIO, "MMC slot 2 Vddf");
 		if (err) {
 			gpio_free(N8X0_SLOT_SWITCH_GPIO);
-			return err;
+			return;
 		}
 		gpio_direction_output(N810_EMMC_VSD_GPIO, 0);
 
-		err = gpio_request(NN810_EMMC_VIO_GPIO, "MMC slot 2 Vdd");
+		err = gpio_request(N810_EMMC_VIO_GPIO, "MMC slot 2 Vdd");
 		if (err) {
 			gpio_free(N8X0_SLOT_SWITCH_GPIO);
 			gpio_free(N810_EMMC_VSD_GPIO);
-			return err;
+			return;
 		}
-		gpio_direction_output(NN810_EMMC_VIO_GPIO, 0);
+		gpio_direction_output(N810_EMMC_VIO_GPIO, 0);
 	}
 
 	mmc_data[0] = &mmc1_data;

arch/arm/mach-omap2/board-sdp-flash.c

@@ -253,20 +253,20 @@ void __init sdp_flash_init(struct flash_partitions sdp_partition_info[])
 	}
 
 	if (norcs > GPMC_CS_NUM)
-		printk(KERN_INFO "OneNAND: Unable to find configuration "
+		printk(KERN_INFO "NOR: Unable to find configuration "
-				" in GPMC\n ");
+				"in GPMC\n");
 	else
 		board_nor_init(sdp_partition_info[0], norcs);
 
 	if (onenandcs > GPMC_CS_NUM)
 		printk(KERN_INFO "OneNAND: Unable to find configuration "
-				" in GPMC\n ");
+				"in GPMC\n");
 	else
 		board_onenand_init(sdp_partition_info[1], onenandcs);
 
 	if (nandcs > GPMC_CS_NUM)
 		printk(KERN_INFO "NAND: Unable to find configuration "
-				" in GPMC\n ");
+				"in GPMC\n");
 	else
 		board_nand_init(sdp_partition_info[2], nandcs);
 }

arch/arm/mach-omap2/board-zoom-debugboard.c

@@ -96,7 +96,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 
 static struct platform_device zoom_debugboard_serial_device = {
 	.name			= "serial8250",
-	.id			= 3,
+	.id			= PLAT8250_DEV_PLATFORM,
 	.dev			= {
 		.platform_data	= serial_platform_data,
 	},

arch/arm/mach-omap2/board-zoom-peripherals.c

@@ -280,7 +280,6 @@ static void enable_board_wakeup_source(void)
 void __init zoom_peripherals_init(void)
 {
 	omap_i2c_init();
-	omap_serial_init();
 	usb_musb_init(&musb_board_data);
 	enable_board_wakeup_source();
 }

arch/arm/mach-omap2/clock3xxx_data.c

@@ -895,7 +895,7 @@ static struct clk dpll4_m4x2_ck = {
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dpll4_m4_ck,
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_bit	= OMAP3430_PWRDN_CAM_SHIFT,
+	.enable_bit	= OMAP3430_PWRDN_DSS1_SHIFT,
 	.flags		= INVERT_ENABLE,
 	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap3_clkoutx2_recalc,

arch/arm/mach-omap2/clock44xx_data.c

@@ -2671,10 +2671,10 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK("omap-mcbsp.2",	"ick",				&dummy_ck,	CK_443X),
 	CLK("omap-mcbsp.3",	"ick",				&dummy_ck,	CK_443X),
 	CLK("omap-mcbsp.4",	"ick",				&dummy_ck,	CK_443X),
-	CLK("omap-mcspi.1",	"ick",				&dummy_ck,	CK_443X),
+	CLK("omap2_mcspi.1",	"ick",			&dummy_ck,	CK_443X),
-	CLK("omap-mcspi.2",	"ick",				&dummy_ck,	CK_443X),
+	CLK("omap2_mcspi.2",	"ick",			&dummy_ck,	CK_443X),
-	CLK("omap-mcspi.3",	"ick",				&dummy_ck,	CK_443X),
+	CLK("omap2_mcspi.3",	"ick",			&dummy_ck,	CK_443X),
-	CLK("omap-mcspi.4",	"ick",				&dummy_ck,	CK_443X),
+	CLK("omap2_mcspi.4",	"ick",			&dummy_ck,	CK_443X),
 	CLK(NULL,	"uart1_ick",			&dummy_ck,	CK_443X),
 	CLK(NULL,	"uart2_ick",			&dummy_ck,	CK_443X),
 	CLK(NULL,	"uart3_ick",			&dummy_ck,	CK_443X),

arch/arm/mach-omap2/clockdomain.c

@@ -240,7 +240,7 @@ static void _omap2_clkdm_set_hwsup(struct clockdomain *clkdm, int enable)
 			bits = OMAP24XX_CLKSTCTRL_ENABLE_AUTO;
 		else
 			bits = OMAP24XX_CLKSTCTRL_DISABLE_AUTO;
-	} else if (cpu_is_omap34xx() | cpu_is_omap44xx()) {
+	} else if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
 		if (enable)
 			bits = OMAP34XX_CLKSTCTRL_ENABLE_AUTO;
 		else
@@ -812,7 +812,7 @@ int omap2_clkdm_sleep(struct clockdomain *clkdm)
 		cm_set_mod_reg_bits(OMAP24XX_FORCESTATE,
 			    clkdm->pwrdm.ptr->prcm_offs, OMAP2_PM_PWSTCTRL);
 
-	} else if (cpu_is_omap34xx() | cpu_is_omap44xx()) {
+	} else if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
 
 		u32 bits = (OMAP34XX_CLKSTCTRL_FORCE_SLEEP <<
 			 __ffs(clkdm->clktrctrl_mask));
@@ -856,7 +856,7 @@ int omap2_clkdm_wakeup(struct clockdomain *clkdm)
 		cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE,
 			      clkdm->pwrdm.ptr->prcm_offs, OMAP2_PM_PWSTCTRL);
 
-	} else if (cpu_is_omap34xx() | cpu_is_omap44xx()) {
+	} else if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
 
 		u32 bits = (OMAP34XX_CLKSTCTRL_FORCE_WAKEUP <<
 			 __ffs(clkdm->clktrctrl_mask));

arch/arm/mach-omap2/devices.c

@@ -726,7 +726,7 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
 			if (!cpu_is_omap44xx())
 				return;
 			base = OMAP4_MMC5_BASE + OMAP4_MMC_REG_OFFSET;
-			irq = OMAP44XX_IRQ_MMC4;
+			irq = OMAP44XX_IRQ_MMC5;
 			break;
 		default:
 			continue;

arch/arm/mach-omap2/gpmc-nand.c

@@ -39,6 +39,9 @@ static int omap2_nand_gpmc_retime(void)
 	struct gpmc_timings t;
 	int err;
 
+	if (!gpmc_nand_data->gpmc_t)
+		return 0;
+
 	memset(&t, 0, sizeof(t));
 	t.sync_clk = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->sync_clk);
 	t.cs_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_on);

arch/arm/mach-omap2/include/mach/entry-macro.S

@@ -52,7 +52,7 @@ omap_irq_base:	.word	0
 
 		mrc	p15, 0, \tmp, c0, c0, 0	@ get processor revision
 		and	\tmp, \tmp, #0x000f0000	@ only check architecture
-		cmp	\tmp, #0x00060000	@ is v6?
+		cmp	\tmp, #0x00070000	@ is v6?
 		beq	2400f			@ found v6 so it's omap24xx
 		mrc	p15, 0, \tmp, c0, c0, 0	@ get processor revision
 		and	\tmp, \tmp, #0x000000f0	@ check cortex 8 or 9

arch/arm/mach-omap2/omap-headsmp.S

@@ -33,7 +33,7 @@
 ENTRY(omap_secondary_startup)
 hold:	ldr	r12,=0x103
 	dsb
-	smc				@ read from AuxCoreBoot0
+	smc	#0			@ read from AuxCoreBoot0
 	mov	r0, r0, lsr #9
 	mrc	p15, 0, r4, c0, c0, 5
 	and	r4, r4, #0x0f
@@ -52,7 +52,7 @@ ENTRY(omap_modify_auxcoreboot0)
 	stmfd   sp!, {r1-r12, lr}
 	ldr	r12, =0x104
 	dsb
-	smc
+	smc	#0
 	ldmfd   sp!, {r1-r12, pc}
 END(omap_modify_auxcoreboot0)
 
@@ -60,6 +60,6 @@ ENTRY(omap_auxcoreboot_addr)
 	stmfd   sp!, {r2-r12, lr}
 	ldr	r12, =0x105
 	dsb
-	smc
+	smc	#0
 	ldmfd   sp!, {r2-r12, pc}
 END(omap_auxcoreboot_addr)

arch/arm/mach-omap2/omap44xx-smc.S

@@ -27,6 +27,6 @@ ENTRY(omap_smc1)
 	mov	r12, r0
 	mov 	r0, r1
 	dsb
-	smc
+	smc	#0
 	ldmfd   sp!, {r2-r12, pc}
 END(omap_smc1)

arch/arm/mach-omap2/omap_hwmod.c

@@ -1511,6 +1511,9 @@ struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh)
 		c = oh->slaves[oh->_mpu_port_index]->_clk;
 	}
 
+	if (!c->clkdm)
+		return NULL;
+
 	return c->clkdm->pwrdm.ptr;
 
 }

arch/arm/mach-omap2/powerdomain.c

@@ -222,7 +222,7 @@ void pwrdm_init(struct powerdomain **pwrdm_list)
 {
 	struct powerdomain **p = NULL;
 
-	if (cpu_is_omap24xx() | cpu_is_omap34xx()) {
+	if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
 		pwrstctrl_reg_offs = OMAP2_PM_PWSTCTRL;
 		pwrstst_reg_offs = OMAP2_PM_PWSTST;
 	} else if (cpu_is_omap44xx()) {

arch/arm/mach-omap2/prcm.c

@@ -123,7 +123,7 @@ struct omap3_prcm_regs prcm_context;
 u32 omap_prcm_get_reset_sources(void)
 {
 	/* XXX This presumably needs modification for 34XX */
-	if (cpu_is_omap24xx() | cpu_is_omap34xx())
+	if (cpu_is_omap24xx() || cpu_is_omap34xx())
 		return prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST) & 0x7f;
 	if (cpu_is_omap44xx())
 		return prm_read_mod_reg(WKUP_MOD, OMAP4_RM_RSTST) & 0x7f;
@@ -157,7 +157,7 @@ void omap_prcm_arch_reset(char mode, const char *cmd)
 	else
 		WARN_ON(1);
 
-	if (cpu_is_omap24xx() | cpu_is_omap34xx())
+	if (cpu_is_omap24xx() || cpu_is_omap34xx())
 		prm_set_mod_reg_bits(OMAP_RST_DPLL3, prcm_offs,
 						 OMAP2_RM_RSTCTRL);
 	if (cpu_is_omap44xx())

arch/arm/mach-omap2/serial.c

@@ -115,7 +115,6 @@ static struct plat_serial8250_port serial_platform_data2[] = {
 	}
 };
 
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 static struct plat_serial8250_port serial_platform_data3[] = {
 	{
 		.irq		= 70,
@@ -128,23 +127,12 @@ static struct plat_serial8250_port serial_platform_data3[] = {
 	}
 };
 
-static inline void omap2_set_globals_uart4(struct omap_globals *omap2_globals)
-{
-	serial_platform_data3[0].mapbase = omap2_globals->uart4_phys;
-}
-#else
-static inline void omap2_set_globals_uart4(struct omap_globals *omap2_globals)
-{
-}
-#endif
-
 void __init omap2_set_globals_uart(struct omap_globals *omap2_globals)
 {
 	serial_platform_data0[0].mapbase = omap2_globals->uart1_phys;
 	serial_platform_data1[0].mapbase = omap2_globals->uart2_phys;
 	serial_platform_data2[0].mapbase = omap2_globals->uart3_phys;
-	if (cpu_is_omap3630() || cpu_is_omap44xx())
+	serial_platform_data3[0].mapbase = omap2_globals->uart4_phys;
-		omap2_set_globals_uart4(omap2_globals);
 }
 
 static inline unsigned int __serial_read_reg(struct uart_port *up,
@@ -550,7 +538,7 @@ static ssize_t sleep_timeout_store(struct device *dev,
 	unsigned int value;
 
 	if (sscanf(buf, "%u", &value) != 1) {
-		printk(KERN_ERR "sleep_timeout_store: Invalid value\n");
+		dev_err(dev, "sleep_timeout_store: Invalid value\n");
 		return -EINVAL;
 	}
 
@@ -664,27 +652,33 @@ void __init omap_serial_early_init(void)
 		struct device *dev = &pdev->dev;
 		struct plat_serial8250_port *p = dev->platform_data;
 
+		/* Don't map zero-based physical address */
+		if (p->mapbase == 0) {
+			dev_warn(dev, "no physical address for uart#%d,"
+				 " so skipping early_init...\n", i);
+			continue;
+		}
 		/*
 		 * Module 4KB + L4 interconnect 4KB
 		 * Static mapping, never released
 		 */
 		p->membase = ioremap(p->mapbase, SZ_8K);
 		if (!p->membase) {
-			printk(KERN_ERR "ioremap failed for uart%i\n", i + 1);
+			dev_err(dev, "ioremap failed for uart%i\n", i + 1);
 			continue;
 		}
 
 		sprintf(name, "uart%d_ick", i + 1);
 		uart->ick = clk_get(NULL, name);
 		if (IS_ERR(uart->ick)) {
-			printk(KERN_ERR "Could not get uart%d_ick\n", i + 1);
+			dev_err(dev, "Could not get uart%d_ick\n", i + 1);
 			uart->ick = NULL;
 		}
 
 		sprintf(name, "uart%d_fck", i+1);
 		uart->fck = clk_get(NULL, name);
 		if (IS_ERR(uart->fck)) {
-			printk(KERN_ERR "Could not get uart%d_fck\n", i + 1);
+			dev_err(dev, "Could not get uart%d_fck\n", i + 1);
 			uart->fck = NULL;
 		}
 
@@ -727,6 +721,13 @@ void __init omap_serial_init_port(int port)
 	pdev = &uart->pdev;
 	dev = &pdev->dev;
 
+	/* Don't proceed if there's no clocks available */
+	if (unlikely(!uart->ick || !uart->fck)) {
+		WARN(1, "%s: can't init uart%d, no clocks available\n",
+		     kobject_name(&dev->kobj), port);
+		return;
+	}
+
 	omap_uart_enable_clocks(uart);
 
 	omap_uart_reset(uart);

arch/arm/mach-pxa/include/mach/colibri.h

@@ -2,6 +2,7 @@
 #define _COLIBRI_H_
 
 #include <net/ax88796.h>
+#include <mach/mfp.h>
 
 /*
  * common settings for all modules

arch/arm/mach-pxa/include/mach/hardware.h

@@ -202,7 +202,7 @@
 #define __cpu_is_pxa950(id)                             \
 	({                                              \
 		unsigned int _id = (id) >> 4 & 0xfff;	\
-		id == 0x697;				\
+		_id == 0x697;				\
 	 })
 #else
 #define __cpu_is_pxa950(id)	(0)

arch/arm/mach-pxa/include/mach/regs-u2d.h

@@ -166,7 +166,8 @@
 #define U2DMACSR_BUSERRTYPE	(7 << 10)	/* PX Bus Error Type */
 #define U2DMACSR_EORINTR	(1 << 9)	/* End Of Receive */
 #define U2DMACSR_REQPEND	(1 << 8)	/* Request Pending */
-#define U2DMACSR_RASINTR	(1 << 4)	/* Request After Channel Stopped (read / write 1 clear) */#define U2DMACSR_STOPINTR	(1 << 3)	/* Stop Interrupt (read only) */
+#define U2DMACSR_RASINTR	(1 << 4)	/* Request After Channel Stopped (read / write 1 clear) */
+#define U2DMACSR_STOPINTR	(1 << 3)	/* Stop Interrupt (read only) */
 #define U2DMACSR_ENDINTR	(1 << 2)	/* End Interrupt (read / write 1 clear) */
 #define U2DMACSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write 1 clear) */
 #define U2DMACSR_BUSERRINTR	(1 << 0)	/* Bus Error Interrupt (read / write 1 clear) */

arch/arm/mach-pxa/raumfeld.c

@@ -983,7 +983,7 @@ static void __init raumfeld_common_init(void)
 		int i;
 
 		for (i = 0; i < ARRAY_SIZE(gpio_keys_button); i++)
-			if (!strcmp(gpio_keys_button[i].desc, "on/off button"))
+			if (!strcmp(gpio_keys_button[i].desc, "on_off button"))
 				gpio_keys_button[i].active_low = 1;
 	}
 
@@ -1009,8 +1009,7 @@ static void __init raumfeld_common_init(void)
 		gpio_direction_output(GPIO_W2W_PDN, 0);
 
 	/* this can be used to switch off the device */
-	ret = gpio_request(GPIO_SHUTDOWN_SUPPLY,
+	ret = gpio_request(GPIO_SHUTDOWN_SUPPLY, "supply shutdown");
-				"supply shutdown");
 	if (ret < 0)
 		pr_warning("Unable to request GPIO_SHUTDOWN_SUPPLY\n");
 	else

arch/arm/mach-pxa/spitz.c

@@ -363,7 +363,7 @@ static struct gpio_keys_button spitz_gpio_keys[] = {
 		.type	= EV_PWR,
 		.code	= KEY_SUSPEND,
 		.gpio	= SPITZ_GPIO_ON_KEY,
-		.desc	= "On/Off",
+		.desc	= "On Off",
 		.wakeup	= 1,
 	},
 	/* Two buttons detecting the lid state */

arch/arm/mach-pxa/viper.c

@@ -34,6 +34,7 @@
 #include <linux/pm.h>
 #include <linux/sched.h>
 #include <linux/gpio.h>
+#include <linux/jiffies.h>
 #include <linux/i2c-gpio.h>
 #include <linux/serial_8250.h>
 #include <linux/smc91x.h>
@@ -454,7 +455,7 @@ static struct i2c_gpio_platform_data i2c_bus_data = {
 	.sda_pin = VIPER_RTC_I2C_SDA_GPIO,
 	.scl_pin = VIPER_RTC_I2C_SCL_GPIO,
 	.udelay  = 10,
-	.timeout = 100,
+	.timeout = HZ,
 };
 
 static struct platform_device i2c_bus_device = {
@@ -779,7 +780,7 @@ static void __init viper_tpm_init(void)
 		.sda_pin = VIPER_TPM_I2C_SDA_GPIO,
 		.scl_pin = VIPER_TPM_I2C_SCL_GPIO,
 		.udelay  = 10,
-		.timeout = 100,
+		.timeout = HZ,
 	};
 	char *errstr;
 

arch/arm/mach-realview/core.c

@@ -254,7 +254,7 @@ static unsigned int realview_mmc_status(struct device *dev)
 	else
 		mask = 2;
 
-	return readl(REALVIEW_SYSMCI) & mask;
+	return !(readl(REALVIEW_SYSMCI) & mask);
 }
 
 struct mmci_platform_data realview_mmc0_plat_data = {

arch/arm/mach-sa1100/Kconfig

@@ -57,7 +57,7 @@ config SA1100_COLLIE
 config SA1100_H3100
 	bool "Compaq iPAQ H3100"
 	select HTC_EGPIO
-	select CPU_FREQ_SA1100
+	select CPU_FREQ_SA1110
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
 	  H3100 handheld computer.  Information about this machine and the
@@ -68,7 +68,7 @@ config SA1100_H3100
 config SA1100_H3600
 	bool "Compaq iPAQ H3600/H3700"
 	select HTC_EGPIO
-	select CPU_FREQ_SA1100
+	select CPU_FREQ_SA1110
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
 	  H3600 handheld computer.  Information about this machine and the

arch/arm/mach-sa1100/cpu-sa1110.c

@@ -363,6 +363,9 @@ static int __init sa1110_clk_init(void)
 	struct sdram_params *sdram;
 	const char *name = sdram_name;
 
+	if (!cpu_is_sa1110())
+		return -ENODEV;
+
 	if (!name[0]) {
 		if (machine_is_assabet())
 			name = "TC59SM716-CL3";

arch/arm/mm/alignment.c

@@ -166,15 +166,15 @@ union offset_union {
  THUMB(	"1:	"ins"	%1, [%2]\n"	)		\
  THUMB(	"	add	%2, %2, #1\n"	)		\
 	"2:\n"						\
-	"	.section .fixup,\"ax\"\n"		\
+	"	.pushsection .fixup,\"ax\"\n"		\
 	"	.align	2\n"				\
 	"3:	mov	%0, #1\n"			\
 	"	b	2b\n"				\
-	"	.previous\n"				\
+	"	.popsection\n"				\
-	"	.section __ex_table,\"a\"\n"		\
+	"	.pushsection __ex_table,\"a\"\n"	\
 	"	.align	3\n"				\
 	"	.long	1b, 3b\n"			\
-	"	.previous\n"				\
+	"	.popsection\n"				\
 	: "=r" (err), "=&r" (val), "=r" (addr)		\
 	: "0" (err), "2" (addr))
 
@@ -226,16 +226,16 @@ union offset_union {
 		"	mov	%1, %1, "NEXT_BYTE"\n"		\
 		"2:	"ins"	%1, [%2]\n"			\
 		"3:\n"						\
-		"	.section .fixup,\"ax\"\n"		\
+		"	.pushsection .fixup,\"ax\"\n"		\
 		"	.align	2\n"				\
 		"4:	mov	%0, #1\n"			\
 		"	b	3b\n"				\
-		"	.previous\n"				\
+		"	.popsection\n"				\
-		"	.section __ex_table,\"a\"\n"		\
+		"	.pushsection __ex_table,\"a\"\n"	\
 		"	.align	3\n"				\
 		"	.long	1b, 4b\n"			\
 		"	.long	2b, 4b\n"			\
-		"	.previous\n"				\
+		"	.popsection\n"				\
 		: "=r" (err), "=&r" (v), "=&r" (a)		\
 		: "0" (err), "1" (v), "2" (a));			\
 		if (err)					\
@@ -266,18 +266,18 @@ union offset_union {
 		"	mov	%1, %1, "NEXT_BYTE"\n"		\
 		"4:	"ins"	%1, [%2]\n"			\
 		"5:\n"						\
-		"	.section .fixup,\"ax\"\n"		\
+		"	.pushsection .fixup,\"ax\"\n"		\
 		"	.align	2\n"				\
 		"6:	mov	%0, #1\n"			\
 		"	b	5b\n"				\
-		"	.previous\n"				\
+		"	.popsection\n"				\
-		"	.section __ex_table,\"a\"\n"		\
+		"	.pushsection __ex_table,\"a\"\n"	\
 		"	.align	3\n"				\
 		"	.long	1b, 6b\n"			\
 		"	.long	2b, 6b\n"			\
 		"	.long	3b, 6b\n"			\
 		"	.long	4b, 6b\n"			\
-		"	.previous\n"				\
+		"	.popsection\n"				\
 		: "=r" (err), "=&r" (v), "=&r" (a)		\
 		: "0" (err), "1" (v), "2" (a));			\
 		if (err)					\

arch/arm/mm/init.c

@@ -86,9 +86,6 @@ void show_mem(void)
 	printk("Mem-info:\n");
 	show_free_areas();
 	for_each_online_node(node) {
-		pg_data_t *n = NODE_DATA(node);
-		struct page *map = pgdat_page_nr(n, 0) - n->node_start_pfn;
-
 		for_each_nodebank (i,mi,node) {
 			struct membank *bank = &mi->bank[i];
 			unsigned int pfn1, pfn2;
@@ -97,8 +94,8 @@ void show_mem(void)
 			pfn1 = bank_pfn_start(bank);
 			pfn2 = bank_pfn_end(bank);
 
-			page = map + pfn1;
+			page = pfn_to_page(pfn1);
-			end  = map + pfn2;
+			end  = pfn_to_page(pfn2 - 1) + 1;
 
 			do {
 				total++;
@@ -603,9 +600,6 @@ void __init mem_init(void)
 	reserved_pages = free_pages = 0;
 
 	for_each_online_node(node) {
-		pg_data_t *n = NODE_DATA(node);
-		struct page *map = pgdat_page_nr(n, 0) - n->node_start_pfn;
-
 		for_each_nodebank(i, &meminfo, node) {
 			struct membank *bank = &meminfo.bank[i];
 			unsigned int pfn1, pfn2;
@@ -614,8 +608,8 @@ void __init mem_init(void)
 			pfn1 = bank_pfn_start(bank);
 			pfn2 = bank_pfn_end(bank);
 
-			page = map + pfn1;
+			page = pfn_to_page(pfn1);
-			end  = map + pfn2;
+			end  = pfn_to_page(pfn2 - 1) + 1;
 
 			do {
 				if (PageReserved(page))

arch/arm/mm/proc-sa1100.S

@@ -45,7 +45,7 @@ ENTRY(cpu_sa1100_proc_init)
 	mcr	p15, 0, r0, c9, c0, 5		@ Allow read-buffer operations from userland
 	mov	pc, lr
 
-	.previous
+	.section .text
 
 /*
  * cpu_sa1100_proc_fin()

arch/arm/nwfpe/entry.S

@@ -111,12 +111,12 @@ next:
 	@ to fault.  Emit the appropriate exception gunk to fix things up.
 	@ ??? For some reason, faults can happen at .Lx2 even with a
 	@ plain LDR instruction.  Weird, but it seems harmless.
-	.section .fixup,"ax"
+	.pushsection .fixup,"ax"
 	.align	2
 .Lfix:	mov	pc, r9			@ let the user eat segfaults
-	.previous
+	.popsection
 
-	.section __ex_table,"a"
+	.pushsection __ex_table,"a"
 	.align	3
 	.long	.Lx1, .Lfix
-	.previous
+	.popsection

arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h

@@ -31,7 +31,13 @@
 #define DMA_MODE_WRITE		1
 #define DMA_MODE_MASK		1
 
-#define DMA_BASE IO_ADDRESS(DMA_BASE_ADDR)
+#define MX1_DMA_REG(offset)	MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR + (offset))
+
+/* DMA Interrupt Mask Register */
+#define MX1_DMA_DIMR		MX1_DMA_REG(0x08)
+
+/* Channel Control Register */
+#define MX1_DMA_CCR(x)		MX1_DMA_REG(0x8c + ((x) << 6))
 
 #define IMX_DMA_MEMSIZE_32	(0 << 4)
 #define IMX_DMA_MEMSIZE_8	(1 << 4)

arch/arm/plat-omap/common.c

@@ -44,9 +44,6 @@
 
 #define NO_LENGTH_CHECK 0xffffffff
 
-unsigned char omap_bootloader_tag[512];
-int omap_bootloader_tag_len;
-
 struct omap_board_config_kernel *omap_board_config;
 int omap_board_config_size;
 
@@ -100,10 +97,17 @@ EXPORT_SYMBOL(omap_get_var_config);
 
 #include <linux/clocksource.h>
 
+/*
+ * offset_32k holds the init time counter value. It is then subtracted
+ * from every counter read to achieve a counter that counts time from the
+ * kernel boot (needed for sched_clock()).
+ */
+static u32 offset_32k __read_mostly;
+
 #ifdef CONFIG_ARCH_OMAP16XX
 static cycle_t omap16xx_32k_read(struct clocksource *cs)
 {
-	return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED);
+	return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED) - offset_32k;
 }
 #else
 #define omap16xx_32k_read	NULL
@@ -112,7 +116,7 @@ static cycle_t omap16xx_32k_read(struct clocksource *cs)
 #ifdef CONFIG_ARCH_OMAP2420
 static cycle_t omap2420_32k_read(struct clocksource *cs)
 {
-	return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10);
+	return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10) - offset_32k;
 }
 #else
 #define omap2420_32k_read	NULL
@@ -121,7 +125,7 @@ static cycle_t omap2420_32k_read(struct clocksource *cs)
 #ifdef CONFIG_ARCH_OMAP2430
 static cycle_t omap2430_32k_read(struct clocksource *cs)
 {
-	return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10);
+	return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10) - offset_32k;
 }
 #else
 #define omap2430_32k_read	NULL
@@ -130,7 +134,7 @@ static cycle_t omap2430_32k_read(struct clocksource *cs)
 #ifdef CONFIG_ARCH_OMAP3
 static cycle_t omap34xx_32k_read(struct clocksource *cs)
 {
-	return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10);
+	return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10) - offset_32k;
 }
 #else
 #define omap34xx_32k_read	NULL
@@ -139,7 +143,7 @@ static cycle_t omap34xx_32k_read(struct clocksource *cs)
 #ifdef CONFIG_ARCH_OMAP4
 static cycle_t omap44xx_32k_read(struct clocksource *cs)
 {
-	return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10);
+	return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10) - offset_32k;
 }
 #else
 #define omap44xx_32k_read	NULL
@@ -227,6 +231,8 @@ static int __init omap_init_clocksource_32k(void)
 		clocksource_32k.mult = clocksource_hz2mult(32768,
 					    clocksource_32k.shift);
 
+		offset_32k = clocksource_32k.read(&clocksource_32k);
+
 		if (clocksource_register(&clocksource_32k))
 			printk(err, clocksource_32k.name);
 	}

arch/arm/plat-omap/dma.c

@@ -937,6 +937,15 @@ void omap_start_dma(int lch)
 {
 	u32 l;
 
+	/*
+	 * The CPC/CDAC register needs to be initialized to zero
+	 * before starting dma transfer.
+	 */
+	if (cpu_is_omap15xx())
+		dma_write(0, CPC(lch));
+	else
+		dma_write(0, CDAC(lch));
+
 	if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
 		int next_lch, cur_lch;
 		char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];

arch/arm/plat-omap/gpio.c

@@ -798,7 +798,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 	case METHOD_MPUIO:
 		reg += OMAP_MPUIO_GPIO_INT_EDGE;
 		l = __raw_readl(reg);
-		if (trigger & IRQ_TYPE_EDGE_BOTH)
+		if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
 			bank->toggle_mask |= 1 << gpio;
 		if (trigger & IRQ_TYPE_EDGE_RISING)
 			l |= 1 << gpio;
@@ -812,7 +812,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 	case METHOD_GPIO_1510:
 		reg += OMAP1510_GPIO_INT_CONTROL;
 		l = __raw_readl(reg);
-		if (trigger & IRQ_TYPE_EDGE_BOTH)
+		if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
 			bank->toggle_mask |= 1 << gpio;
 		if (trigger & IRQ_TYPE_EDGE_RISING)
 			l |= 1 << gpio;
@@ -846,7 +846,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 	case METHOD_GPIO_7XX:
 		reg += OMAP7XX_GPIO_INT_CONTROL;
 		l = __raw_readl(reg);
-		if (trigger & IRQ_TYPE_EDGE_BOTH)
+		if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
 			bank->toggle_mask |= 1 << gpio;
 		if (trigger & IRQ_TYPE_EDGE_RISING)
 			l |= 1 << gpio;

arch/arm/plat-omap/include/plat/irqs.h

@@ -345,8 +345,6 @@
 #define INT_34XX_MMC3_IRQ	94
 #define INT_34XX_GPT12_IRQ	95
 
-#define	INT_34XX_BENCH_MPU_EMUL	3
-
 #define INT_35XX_HECC0_IRQ		24
 #define INT_35XX_HECC1_IRQ		28
 #define INT_35XX_EMAC_C0_RXTHRESH_IRQ	67

arch/arm/plat-omap/include/plat/mcbsp.h

@@ -59,7 +59,7 @@
 #define OMAP44XX_MCBSP1_BASE	0x49022000
 #define OMAP44XX_MCBSP2_BASE	0x49024000
 #define OMAP44XX_MCBSP3_BASE	0x49026000
-#define OMAP44XX_MCBSP4_BASE	0x48074000
+#define OMAP44XX_MCBSP4_BASE	0x48096000
 
 #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
 

arch/arm/plat-omap/include/plat/nand.h

@@ -29,4 +29,11 @@ struct omap_nand_platform_data {
 /* size (4 KiB) for IO mapping */
 #define	NAND_IO_SIZE	SZ_4K
 
+#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
 extern int gpmc_nand_init(struct omap_nand_platform_data *d);
+#else
+static inline int gpmc_nand_init(struct omap_nand_platform_data *d)
+{
+	return 0;
+}
+#endif

arch/arm/plat-omap/include/plat/omap44xx.h

@@ -32,7 +32,7 @@
 #define OMAP4430_PRM_BASE		0x4a306000
 #define OMAP44XX_GPMC_BASE		0x50000000
 #define OMAP443X_SCM_BASE		0x4a002000
-#define OMAP443X_CTRL_BASE		OMAP443X_SCM_BASE
+#define OMAP443X_CTRL_BASE		0x4a100000
 #define OMAP44XX_IC_BASE		0x48200000
 #define OMAP44XX_IVA_INTC_BASE		0x40000000
 #define IRQ_SIR_IRQ			0x0040

arch/arm/plat-omap/include/plat/omap_hwmod.h

@@ -294,8 +294,8 @@ struct omap_hwmod_class_sysconfig {
 	u16 rev_offs;
 	u16 sysc_offs;
 	u16 syss_offs;
+	u16 sysc_flags;
 	u8 idlemodes;
-	u8 sysc_flags;
 	u8 clockact;
 	struct omap_hwmod_sysc_fields *sysc_fields;
 };

arch/arm/plat-omap/include/plat/usb.h

@@ -46,7 +46,7 @@ struct ehci_hcd_omap_platform_data {
 struct omap_musb_board_data {
 	u8	interface_type;
 	u8	mode;
-	u8	power;
+	u16	power;
 };
 
 enum musb_interface    {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};

arch/arm/plat-pxa/dma.c

@@ -245,7 +245,7 @@ static void pxa_dma_init_debugfs(void)
 
 	dbgfs_chan = kmalloc(sizeof(*dbgfs_state) * num_dma_channels,
 			     GFP_KERNEL);
-	if (!dbgfs_state)
+	if (!dbgfs_chan)
 		goto err_alloc;
 
 	chandir = debugfs_create_dir("channels", dbgfs_root);

arch/arm/tools/mach-types

@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Sat Mar 20 15:35:41 2010
+# Last update: Sat May 1 10:36:42 2010
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -2749,3 +2749,58 @@ stamp9g45		MACH_STAMP9G45		STAMP9G45		2761
 h6053			MACH_H6053		H6053			2762
 smint01			MACH_SMINT01		SMINT01			2763
 prtlvt2			MACH_PRTLVT2		PRTLVT2			2764
+ap420			MACH_AP420		AP420			2765
+htcshift		MACH_HTCSHIFT		HTCSHIFT		2766
+davinci_dm365_fc	MACH_DAVINCI_DM365_FC	DAVINCI_DM365_FC	2767
+msm8x55_surf		MACH_MSM8X55_SURF	MSM8X55_SURF		2768
+msm8x55_ffa		MACH_MSM8X55_FFA	MSM8X55_FFA		2769
+esl_vamana		MACH_ESL_VAMANA		ESL_VAMANA		2770
+sbc35			MACH_SBC35		SBC35			2771
+mpx6446			MACH_MPX6446		MPX6446			2772
+oreo_controller		MACH_OREO_CONTROLLER	OREO_CONTROLLER		2773
+kopin_models		MACH_KOPIN_MODELS	KOPIN_MODELS		2774
+ttc_vision2		MACH_TTC_VISION2	TTC_VISION2		2775
+cns3420vb		MACH_CNS3420VB		CNS3420VB		2776
+lpc2			MACH_LPC2		LPC2			2777
+olympus			MACH_OLYMPUS		OLYMPUS			2778
+vortex			MACH_VORTEX		VORTEX			2779
+s5pc200			MACH_S5PC200		S5PC200			2780
+ecucore_9263		MACH_ECUCORE_9263	ECUCORE_9263		2781
+smdkc200		MACH_SMDKC200		SMDKC200		2782
+emsiso_sx27		MACH_EMSISO_SX27	EMSISO_SX27		2783
+apx_som9g45_ek		MACH_APX_SOM9G45_EK	APX_SOM9G45_EK		2784
+songshan		MACH_SONGSHAN		SONGSHAN		2785
+tianshan		MACH_TIANSHAN		TIANSHAN		2786
+vpx500			MACH_VPX500		VPX500			2787
+am3517sam		MACH_AM3517SAM		AM3517SAM		2788
+skat91_sim508		MACH_SKAT91_SIM508	SKAT91_SIM508		2789
+skat91_s3e		MACH_SKAT91_S3E		SKAT91_S3E		2790
+omap4_panda		MACH_OMAP4_PANDA	OMAP4_PANDA		2791
+df7220			MACH_DF7220		DF7220			2792
+nemini			MACH_NEMINI		NEMINI			2793
+t8200			MACH_T8200		T8200			2794
+apf51			MACH_APF51		APF51			2795
+dr_rc_unit		MACH_DR_RC_UNIT		DR_RC_UNIT		2796
+bordeaux		MACH_BORDEAUX		BORDEAUX		2797
+catania_b		MACH_CATANIA_B		CATANIA_B		2798
+mx51_ocean		MACH_MX51_OCEAN		MX51_OCEAN		2799
+ti8168evm		MACH_TI8168EVM		TI8168EVM		2800
+neocoreomap		MACH_NEOCOREOMAP	NEOCOREOMAP		2801
+withings_wbp		MACH_WITHINGS_WBP	WITHINGS_WBP		2802
+dbps			MACH_DBPS		DBPS			2803
+sbc9261			MACH_SBC9261		SBC9261			2804
+pcbfp0001		MACH_PCBFP0001		PCBFP0001		2805
+speedy			MACH_SPEEDY		SPEEDY			2806
+chrysaor		MACH_CHRYSAOR		CHRYSAOR		2807
+tango			MACH_TANGO		TANGO			2808
+synology_dsx11		MACH_SYNOLOGY_DSX11	SYNOLOGY_DSX11		2809
+hanlin_v3ext		MACH_HANLIN_V3EXT	HANLIN_V3EXT		2810
+hanlin_v5		MACH_HANLIN_V5		HANLIN_V5		2811
+hanlin_v3plus		MACH_HANLIN_V3PLUS	HANLIN_V3PLUS		2812
+iriver_story		MACH_IRIVER_STORY	IRIVER_STORY		2813
+irex_iliad		MACH_IREX_ILIAD		IREX_ILIAD		2814
+irex_dr1000		MACH_IREX_DR1000	IREX_DR1000		2815
+teton_bga		MACH_TETON_BGA		TETON_BGA		2816
+snapper9g45		MACH_SNAPPER9G45	SNAPPER9G45		2817
+tam3517			MACH_TAM3517		TAM3517			2818
+pdc100			MACH_PDC100		PDC100			2819

arch/avr32/kernel/ptrace.c

@@ -28,7 +28,7 @@ static struct pt_regs *get_user_regs(struct task_struct *tsk)
 				  THREAD_SIZE - sizeof(struct pt_regs));
 }
 
-static void user_enable_single_step(struct task_struct *tsk)
+void user_enable_single_step(struct task_struct *tsk)
 {
 	pr_debug("user_enable_single_step: pid=%u, PC=0x%08lx, SR=0x%08lx\n",
 		 tsk->pid, task_pt_regs(tsk)->pc, task_pt_regs(tsk)->sr);

arch/ia64/kvm/kvm-ia64.c

@@ -1802,7 +1802,8 @@ static int kvm_ia64_sync_dirty_log(struct kvm *kvm,
 {
 	struct kvm_memory_slot *memslot;
 	int r, i;
-	long n, base;
+	long base;
+	unsigned long n;
 	unsigned long *dirty_bitmap = (unsigned long *)(kvm->arch.vm_base +
 			offsetof(struct kvm_vm_data, kvm_mem_dirty_log));
 
@@ -1815,7 +1816,7 @@ static int kvm_ia64_sync_dirty_log(struct kvm *kvm,
 	if (!memslot->dirty_bitmap)
 		goto out;
 
-	n = ALIGN(memslot->npages, BITS_PER_LONG) / 8;
+	n = kvm_dirty_bitmap_bytes(memslot);
 	base = memslot->base_gfn / BITS_PER_LONG;
 
 	for (i = 0; i < n/sizeof(long); ++i) {
@@ -1831,7 +1832,7 @@ int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm,
 		struct kvm_dirty_log *log)
 {
 	int r;
-	int n;
+	unsigned long n;
 	struct kvm_memory_slot *memslot;
 	int is_dirty = 0;
 
@@ -1850,7 +1851,7 @@ int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm,
 	if (is_dirty) {
 		kvm_flush_remote_tlbs(kvm);
 		memslot = &kvm->memslots->memslots[log->slot];
-		n = ALIGN(memslot->npages, BITS_PER_LONG) / 8;
+		n = kvm_dirty_bitmap_bytes(memslot);
 		memset(memslot->dirty_bitmap, 0, n);
 	}
 	r = 0;

arch/m68k/include/asm/mcfuart.h

@@ -212,5 +212,10 @@ struct mcf_platform_uart {
 #define	MCFUART_URF_RXS		0xc0		/* Receiver status */
 #endif
 
+#if defined(CONFIG_M5272)
+#define MCFUART_TXFIFOSIZE	25
+#else
+#define MCFUART_TXFIFOSIZE	1
+#endif
 /****************************************************************************/
 #endif	/* mcfuart_h */

arch/m68knommu/Makefile

@@ -94,7 +94,7 @@ cflags-$(CONFIG_M520x)		:= $(call cc-option,-mcpu=5208,-m5200)
 cflags-$(CONFIG_M523x)		:= $(call cc-option,-mcpu=523x,-m5307)
 cflags-$(CONFIG_M5249)		:= $(call cc-option,-mcpu=5249,-m5200)
 cflags-$(CONFIG_M5271)		:= $(call cc-option,-mcpu=5271,-m5307)
-cflags-$(CONFIG_M5272)		:= $(call cc-option,-mcpu=5271,-m5200)
+cflags-$(CONFIG_M5272)		:= $(call cc-option,-mcpu=5272,-m5307)
 cflags-$(CONFIG_M5275)		:= $(call cc-option,-mcpu=5275,-m5307)
 cflags-$(CONFIG_M528x)		:= $(call cc-option,-m528x,-m5307)
 cflags-$(CONFIG_M5307)		:= $(call cc-option,-m5307,-m5200)

arch/m68knommu/kernel/entry.S

@@ -145,6 +145,6 @@ ENTRY(ret_from_user_signal)
 	trap #0
 
 ENTRY(ret_from_user_rt_signal)
-	move #__NR_rt_sigreturn,%d0
+	movel #__NR_rt_sigreturn,%d0
 	trap #0
 

arch/m68knommu/platform/68360/ints.c

@@ -107,7 +107,6 @@ void init_IRQ(void)
 	_ramvec[vba+CPMVEC_PIO_PC7]     = inthandler;  /* pio - pc7 */
 	_ramvec[vba+CPMVEC_PIO_PC6]     = inthandler;  /* pio - pc6 */
 	_ramvec[vba+CPMVEC_TIMER3]      = inthandler;  /* timer 3 */
-	_ramvec[vba+CPMVEC_RISCTIMER]   = inthandler;  /* reserved */
 	_ramvec[vba+CPMVEC_PIO_PC5]     = inthandler;  /* pio - pc5 */
 	_ramvec[vba+CPMVEC_PIO_PC4]     = inthandler;  /* pio - pc4 */
 	_ramvec[vba+CPMVEC_RESERVED2]   = inthandler;  /* reserved */

arch/microblaze/configs/mmu_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc6
+# Linux kernel version: 2.6.34-rc6
-# Wed Feb  3 10:02:59 2010
+# Thu May  6 11:22:14 2010
 #
 CONFIG_MICROBLAZE=y
 # CONFIG_SWAP is not set
@@ -22,8 +22,6 @@ CONFIG_GENERIC_CSUM=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_PCI is not set
-CONFIG_NO_DMA=y
 CONFIG_DTC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
@@ -56,7 +54,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -106,6 +103,8 @@ CONFIG_SLAB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
 
 #
 # GCOV-based kernel profiling
@@ -245,13 +244,20 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Bus Options
+#
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -341,7 +347,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
@@ -370,6 +378,7 @@ CONFIG_MISC_DEVICES=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -383,9 +392,30 @@ CONFIG_NETDEVICES=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_ETHOC is not set
 # CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
@@ -394,6 +424,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
 # CONFIG_KS8851_MLL is not set
 CONFIG_XILINX_EMACLITE=y
@@ -444,6 +475,7 @@ CONFIG_SERIAL_UARTLITE=y
 CONFIG_SERIAL_UARTLITE_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -471,6 +503,12 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -502,6 +540,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 
@@ -572,6 +611,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -595,6 +635,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 CONFIG_CIFS=y
 CONFIG_CIFS_STATS=y
 CONFIG_CIFS_STATS2=y
@@ -696,6 +737,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_OBJECTS is not set
 CONFIG_DEBUG_SLAB=y
 # CONFIG_DEBUG_SLAB_LEAK is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_SPINLOCK=y
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_LOCK_ALLOC is not set
@@ -741,6 +783,7 @@ CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_EARLY_PRINTK=y
 # CONFIG_HEART_BEAT is not set
@@ -862,5 +905,6 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y

arch/microblaze/configs/nommu_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc6
+# Linux kernel version: 2.6.34-rc6
-# Wed Feb  3 10:03:21 2010
+# Thu May  6 11:25:12 2010
 #
 CONFIG_MICROBLAZE=y
 # CONFIG_SWAP is not set
@@ -22,8 +22,6 @@ CONFIG_GENERIC_CSUM=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_PCI is not set
-CONFIG_NO_DMA=y
 CONFIG_DTC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
@@ -58,7 +56,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -96,6 +93,8 @@ CONFIG_SLAB=y
 # CONFIG_MMAP_ALLOW_UNINITIALIZED is not set
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
 
 #
 # GCOV-based kernel profiling
@@ -209,11 +208,14 @@ CONFIG_PROC_DEVICETREE=y
 #
 # Advanced setup
 #
+# CONFIG_ADVANCED_OPTIONS is not set
 
 #
 # Default settings for advanced configuration options are used
 #
+CONFIG_LOWMEM_SIZE=0x30000000
 CONFIG_KERNEL_START=0x90000000
+CONFIG_TASK_SIZE=0x80000000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -235,13 +237,20 @@ CONFIG_BINFMT_FLAT=y
 # CONFIG_BINFMT_SHARED_FLAT is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Bus Options
+#
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -413,6 +422,7 @@ CONFIG_MTD_UCLINUX=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
 CONFIG_OF_DEVICE=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -442,6 +452,7 @@ CONFIG_MISC_DEVICES=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -458,6 +469,7 @@ CONFIG_NETDEVICES=y
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_ETHOC is not set
 # CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
@@ -466,6 +478,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
 # CONFIG_KS8851_MLL is not set
 # CONFIG_XILINX_EMACLITE is not set
@@ -516,6 +529,7 @@ CONFIG_SERIAL_UARTLITE=y
 CONFIG_SERIAL_UARTLITE_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -544,6 +558,12 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -593,6 +613,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 
@@ -661,6 +682,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -689,6 +711,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -733,6 +756,7 @@ CONFIG_DEBUG_OBJECTS_TIMERS=y
 # CONFIG_DEBUG_OBJECTS_WORK is not set
 CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -758,6 +782,7 @@ CONFIG_DEBUG_SG=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
@@ -782,6 +807,7 @@ CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_EARLY_PRINTK=y
 # CONFIG_HEART_BEAT is not set
@@ -901,5 +927,6 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y

arch/microblaze/include/asm/cache.h

@@ -15,7 +15,7 @@
 
 #include <asm/registers.h>
 
-#define L1_CACHE_SHIFT	2
+#define L1_CACHE_SHIFT 5
 /* word-granular cache in microblaze */
 #define L1_CACHE_BYTES	(1 << L1_CACHE_SHIFT)
 

arch/microblaze/include/asm/dma.h

@@ -18,4 +18,10 @@
 #define MAX_DMA_ADDRESS (CONFIG_KERNEL_START + memory_size - 1)
 #endif
 
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy     (0)
+#endif
+
 #endif /* _ASM_MICROBLAZE_DMA_H */

arch/microblaze/include/asm/exceptions.h

@@ -64,12 +64,6 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
 void die(const char *str, struct pt_regs *fp, long err);
 void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr);
 
-#ifdef CONFIG_MMU
-void __bug(const char *file, int line, void *data);
-int bad_trap(int trap_num, struct pt_regs *regs);
-int debug_trap(struct pt_regs *regs);
-#endif /* CONFIG_MMU */
-
 #if defined(CONFIG_KGDB)
 void (*debugger)(struct pt_regs *regs);
 int (*debugger_bpt)(struct pt_regs *regs);

arch/microblaze/include/asm/io.h

@@ -139,8 +139,6 @@ static inline void writel(unsigned int v, volatile void __iomem *addr)
 
 #ifdef CONFIG_MMU
 
-#define mm_ptov(addr)		((void *)__phys_to_virt(addr))
-#define mm_vtop(addr)		((unsigned long)__virt_to_phys(addr))
 #define phys_to_virt(addr)	((void *)__phys_to_virt(addr))
 #define virt_to_phys(addr)	((unsigned long)__virt_to_phys(addr))
 #define virt_to_bus(addr)	((unsigned long)__virt_to_phys(addr))

arch/microblaze/include/asm/page.h

@@ -31,6 +31,9 @@
 
 #ifndef __ASSEMBLY__
 
+/* MS be sure that SLAB allocates aligned objects */
+#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
+
 #define PAGE_UP(addr)	(((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1)))
 #define PAGE_DOWN(addr)	((addr)&(~((PAGE_SIZE)-1)))
 
@@ -70,14 +73,7 @@ typedef unsigned long pte_basic_t;
 
 #endif /* CONFIG_MMU */
 
-#  ifndef CONFIG_MMU
+# define copy_page(to, from)			memcpy((to), (from), PAGE_SIZE)
-#  define copy_page(to, from)			memcpy((to), (from), PAGE_SIZE)
-#  define get_user_page(vaddr)			__get_free_page(GFP_KERNEL)
-#  define free_user_page(page, addr)		free_page(addr)
-#  else /* CONFIG_MMU */
-extern void copy_page(void *to, void *from);
-#  endif /* CONFIG_MMU */
-
 # define clear_page(pgaddr)			memset((pgaddr), 0, PAGE_SIZE)
 
 # define clear_user_page(pgaddr, vaddr, page)	memset((pgaddr), 0, PAGE_SIZE)

arch/microblaze/include/asm/pci.h

@@ -94,14 +94,6 @@ extern int pci_mmap_legacy_page_range(struct pci_bus *bus,
 
 #define HAVE_PCI_LEGACY	1
 
-/* pci_unmap_{page,single} is a nop so... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME)		(0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
-
 /* The PCI address space does equal the physical memory
  * address space (no IOMMU).  The IDE and SCSI device layers use
  * this boolean for bounce buffer decisions.