forked from Minki/linux
ssb: Implement SDIO host bus support
Add support for communicating with a Sonics Silicon Backplane through a SDIO interface, as found in the Nintendo Wii WLAN daughter card. The Nintendo Wii WLAN card includes a custom Broadcom 4318 chip with a SDIO host interface. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
parent
f020979d5d
commit
24ea602e18
@ -66,6 +66,20 @@ config SSB_PCMCIAHOST
|
||||
|
||||
If unsure, say N
|
||||
|
||||
config SSB_SDIOHOST_POSSIBLE
|
||||
bool
|
||||
depends on SSB && (MMC = y || MMC = SSB)
|
||||
default y
|
||||
|
||||
config SSB_SDIOHOST
|
||||
bool "Support for SSB on SDIO-bus host"
|
||||
depends on SSB_SDIOHOST_POSSIBLE
|
||||
help
|
||||
Support for a Sonics Silicon Backplane on top
|
||||
of a SDIO device.
|
||||
|
||||
If unsure, say N
|
||||
|
||||
config SSB_SILENT
|
||||
bool "No SSB kernel messages"
|
||||
depends on SSB && EMBEDDED
|
||||
|
@ -6,6 +6,7 @@ ssb-$(CONFIG_SSB_SPROM) += sprom.o
|
||||
# host support
|
||||
ssb-$(CONFIG_SSB_PCIHOST) += pci.o pcihost_wrapper.o
|
||||
ssb-$(CONFIG_SSB_PCMCIAHOST) += pcmcia.o
|
||||
ssb-$(CONFIG_SSB_SDIOHOST) += sdio.o
|
||||
|
||||
# built-in drivers
|
||||
ssb-y += driver_chipcommon.o
|
||||
|
@ -17,6 +17,7 @@
|
||||
#include <linux/ssb/ssb_driver_gige.h>
|
||||
#include <linux/dma-mapping.h>
|
||||
#include <linux/pci.h>
|
||||
#include <linux/mmc/sdio_func.h>
|
||||
|
||||
#include <pcmcia/cs_types.h>
|
||||
#include <pcmcia/cs.h>
|
||||
@ -88,6 +89,25 @@ found:
|
||||
}
|
||||
#endif /* CONFIG_SSB_PCMCIAHOST */
|
||||
|
||||
#ifdef CONFIG_SSB_SDIOHOST
|
||||
struct ssb_bus *ssb_sdio_func_to_bus(struct sdio_func *func)
|
||||
{
|
||||
struct ssb_bus *bus;
|
||||
|
||||
ssb_buses_lock();
|
||||
list_for_each_entry(bus, &buses, list) {
|
||||
if (bus->bustype == SSB_BUSTYPE_SDIO &&
|
||||
bus->host_sdio == func)
|
||||
goto found;
|
||||
}
|
||||
bus = NULL;
|
||||
found:
|
||||
ssb_buses_unlock();
|
||||
|
||||
return bus;
|
||||
}
|
||||
#endif /* CONFIG_SSB_SDIOHOST */
|
||||
|
||||
int ssb_for_each_bus_call(unsigned long data,
|
||||
int (*func)(struct ssb_bus *bus, unsigned long data))
|
||||
{
|
||||
@ -467,6 +487,12 @@ static int ssb_devices_register(struct ssb_bus *bus)
|
||||
#ifdef CONFIG_SSB_PCMCIAHOST
|
||||
sdev->irq = bus->host_pcmcia->irq.AssignedIRQ;
|
||||
dev->parent = &bus->host_pcmcia->dev;
|
||||
#endif
|
||||
break;
|
||||
case SSB_BUSTYPE_SDIO:
|
||||
#ifdef CONFIG_SSB_SDIO
|
||||
sdev->irq = bus->host_sdio->dev.irq;
|
||||
dev->parent = &bus->host_sdio->dev;
|
||||
#endif
|
||||
break;
|
||||
case SSB_BUSTYPE_SSB:
|
||||
@ -724,12 +750,18 @@ static int ssb_bus_register(struct ssb_bus *bus,
|
||||
err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
|
||||
if (err)
|
||||
goto out;
|
||||
|
||||
/* Init SDIO-host device (if any), before the scan */
|
||||
err = ssb_sdio_init(bus);
|
||||
if (err)
|
||||
goto err_disable_xtal;
|
||||
|
||||
ssb_buses_lock();
|
||||
bus->busnumber = next_busnumber;
|
||||
/* Scan for devices (cores) */
|
||||
err = ssb_bus_scan(bus, baseaddr);
|
||||
if (err)
|
||||
goto err_disable_xtal;
|
||||
goto err_sdio_exit;
|
||||
|
||||
/* Init PCI-host device (if any) */
|
||||
err = ssb_pci_init(bus);
|
||||
@ -776,6 +808,8 @@ err_pci_exit:
|
||||
ssb_pci_exit(bus);
|
||||
err_unmap:
|
||||
ssb_iounmap(bus);
|
||||
err_sdio_exit:
|
||||
ssb_sdio_exit(bus);
|
||||
err_disable_xtal:
|
||||
ssb_buses_unlock();
|
||||
ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
|
||||
@ -825,6 +859,28 @@ int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
|
||||
EXPORT_SYMBOL(ssb_bus_pcmciabus_register);
|
||||
#endif /* CONFIG_SSB_PCMCIAHOST */
|
||||
|
||||
#ifdef CONFIG_SSB_SDIOHOST
|
||||
int ssb_bus_sdiobus_register(struct ssb_bus *bus, struct sdio_func *func,
|
||||
unsigned int quirks)
|
||||
{
|
||||
int err;
|
||||
|
||||
bus->bustype = SSB_BUSTYPE_SDIO;
|
||||
bus->host_sdio = func;
|
||||
bus->ops = &ssb_sdio_ops;
|
||||
bus->quirks = quirks;
|
||||
|
||||
err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0);
|
||||
if (!err) {
|
||||
ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
|
||||
"SDIO device %s\n", sdio_func_id(func));
|
||||
}
|
||||
|
||||
return err;
|
||||
}
|
||||
EXPORT_SYMBOL(ssb_bus_sdiobus_register);
|
||||
#endif /* CONFIG_SSB_PCMCIAHOST */
|
||||
|
||||
int ssb_bus_ssbbus_register(struct ssb_bus *bus,
|
||||
unsigned long baseaddr,
|
||||
ssb_invariants_func_t get_invariants)
|
||||
|
@ -175,6 +175,9 @@ static u32 scan_read32(struct ssb_bus *bus, u8 current_coreidx,
|
||||
} else
|
||||
ssb_pcmcia_switch_segment(bus, 0);
|
||||
break;
|
||||
case SSB_BUSTYPE_SDIO:
|
||||
offset += current_coreidx * SSB_CORE_SIZE;
|
||||
return ssb_sdio_scan_read32(bus, offset);
|
||||
}
|
||||
return readl(bus->mmio + offset);
|
||||
}
|
||||
@ -188,6 +191,8 @@ static int scan_switchcore(struct ssb_bus *bus, u8 coreidx)
|
||||
return ssb_pci_switch_coreidx(bus, coreidx);
|
||||
case SSB_BUSTYPE_PCMCIA:
|
||||
return ssb_pcmcia_switch_coreidx(bus, coreidx);
|
||||
case SSB_BUSTYPE_SDIO:
|
||||
return ssb_sdio_scan_switch_coreidx(bus, coreidx);
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
@ -206,6 +211,8 @@ void ssb_iounmap(struct ssb_bus *bus)
|
||||
SSB_BUG_ON(1); /* Can't reach this code. */
|
||||
#endif
|
||||
break;
|
||||
case SSB_BUSTYPE_SDIO:
|
||||
break;
|
||||
}
|
||||
bus->mmio = NULL;
|
||||
bus->mapped_device = NULL;
|
||||
@ -230,6 +237,10 @@ static void __iomem *ssb_ioremap(struct ssb_bus *bus,
|
||||
SSB_BUG_ON(1); /* Can't reach this code. */
|
||||
#endif
|
||||
break;
|
||||
case SSB_BUSTYPE_SDIO:
|
||||
/* Nothing to ioremap in the SDIO case, just fake it */
|
||||
mmio = (void __iomem *)baseaddr;
|
||||
break;
|
||||
}
|
||||
|
||||
return mmio;
|
||||
|
610
drivers/ssb/sdio.c
Normal file
610
drivers/ssb/sdio.c
Normal file
@ -0,0 +1,610 @@
|
||||
/*
|
||||
* Sonics Silicon Backplane
|
||||
* SDIO-Hostbus related functions
|
||||
*
|
||||
* Copyright 2009 Albert Herranz <albert_herranz@yahoo.es>
|
||||
*
|
||||
* Based on drivers/ssb/pcmcia.c
|
||||
* Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
|
||||
* Copyright 2007-2008 Michael Buesch <mb@bu3sch.de>
|
||||
*
|
||||
* Licensed under the GNU/GPL. See COPYING for details.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/ssb/ssb.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/etherdevice.h>
|
||||
#include <linux/mmc/sdio_func.h>
|
||||
|
||||
#include "ssb_private.h"
|
||||
|
||||
/* Define the following to 1 to enable a printk on each coreswitch. */
|
||||
#define SSB_VERBOSE_SDIOCORESWITCH_DEBUG 1
|
||||
|
||||
|
||||
/* Hardware invariants CIS tuples */
|
||||
#define SSB_SDIO_CIS 0x80
|
||||
#define SSB_SDIO_CIS_SROMREV 0x00
|
||||
#define SSB_SDIO_CIS_ID 0x01
|
||||
#define SSB_SDIO_CIS_BOARDREV 0x02
|
||||
#define SSB_SDIO_CIS_PA 0x03
|
||||
#define SSB_SDIO_CIS_PA_PA0B0_LO 0
|
||||
#define SSB_SDIO_CIS_PA_PA0B0_HI 1
|
||||
#define SSB_SDIO_CIS_PA_PA0B1_LO 2
|
||||
#define SSB_SDIO_CIS_PA_PA0B1_HI 3
|
||||
#define SSB_SDIO_CIS_PA_PA0B2_LO 4
|
||||
#define SSB_SDIO_CIS_PA_PA0B2_HI 5
|
||||
#define SSB_SDIO_CIS_PA_ITSSI 6
|
||||
#define SSB_SDIO_CIS_PA_MAXPOW 7
|
||||
#define SSB_SDIO_CIS_OEMNAME 0x04
|
||||
#define SSB_SDIO_CIS_CCODE 0x05
|
||||
#define SSB_SDIO_CIS_ANTENNA 0x06
|
||||
#define SSB_SDIO_CIS_ANTGAIN 0x07
|
||||
#define SSB_SDIO_CIS_BFLAGS 0x08
|
||||
#define SSB_SDIO_CIS_LEDS 0x09
|
||||
|
||||
#define CISTPL_FUNCE_LAN_NODE_ID 0x04 /* same as in PCMCIA */
|
||||
|
||||
|
||||
/*
|
||||
* Function 1 miscellaneous registers.
|
||||
*
|
||||
* Definitions match src/include/sbsdio.h from the
|
||||
* Android Open Source Project
|
||||
* http://android.git.kernel.org/?p=platform/system/wlan/broadcom.git
|
||||
*
|
||||
*/
|
||||
#define SBSDIO_FUNC1_SBADDRLOW 0x1000a /* SB Address window Low (b15) */
|
||||
#define SBSDIO_FUNC1_SBADDRMID 0x1000b /* SB Address window Mid (b23-b16) */
|
||||
#define SBSDIO_FUNC1_SBADDRHIGH 0x1000c /* SB Address window High (b24-b31) */
|
||||
|
||||
/* valid bits in SBSDIO_FUNC1_SBADDRxxx regs */
|
||||
#define SBSDIO_SBADDRLOW_MASK 0x80 /* Valid address bits in SBADDRLOW */
|
||||
#define SBSDIO_SBADDRMID_MASK 0xff /* Valid address bits in SBADDRMID */
|
||||
#define SBSDIO_SBADDRHIGH_MASK 0xff /* Valid address bits in SBADDRHIGH */
|
||||
|
||||
#define SBSDIO_SB_OFT_ADDR_MASK 0x7FFF /* sb offset addr is <= 15 bits, 32k */
|
||||
|
||||
/* REVISIT: this flag doesn't seem to matter */
|
||||
#define SBSDIO_SB_ACCESS_2_4B_FLAG 0x8000 /* forces 32-bit SB access */
|
||||
|
||||
|
||||
/*
|
||||
* Address map within the SDIO function address space (128K).
|
||||
*
|
||||
* Start End Description
|
||||
* ------- ------- ------------------------------------------
|
||||
* 0x00000 0x0ffff selected backplane address window (64K)
|
||||
* 0x10000 0x1ffff backplane control registers (max 64K)
|
||||
*
|
||||
* The current address window is configured by writing to registers
|
||||
* SBADDRLOW, SBADDRMID and SBADDRHIGH.
|
||||
*
|
||||
* In order to access the contents of a 32-bit Silicon Backplane address
|
||||
* the backplane address window must be first loaded with the highest
|
||||
* 16 bits of the target address. Then, an access must be done to the
|
||||
* SDIO function address space using the lower 15 bits of the address.
|
||||
* Bit 15 of the address must be set when doing 32 bit accesses.
|
||||
*
|
||||
* 10987654321098765432109876543210
|
||||
* WWWWWWWWWWWWWWWWW SB Address Window
|
||||
* OOOOOOOOOOOOOOOO Offset within SB Address Window
|
||||
* a 32-bit access flag
|
||||
*/
|
||||
|
||||
|
||||
/*
|
||||
* SSB I/O via SDIO.
|
||||
*
|
||||
* NOTE: SDIO address @addr is 17 bits long (SDIO address space is 128K).
|
||||
*/
|
||||
|
||||
static inline struct device *ssb_sdio_dev(struct ssb_bus *bus)
|
||||
{
|
||||
return &bus->host_sdio->dev;
|
||||
}
|
||||
|
||||
/* host claimed */
|
||||
static int ssb_sdio_writeb(struct ssb_bus *bus, unsigned int addr, u8 val)
|
||||
{
|
||||
int error = 0;
|
||||
|
||||
sdio_writeb(bus->host_sdio, val, addr, &error);
|
||||
if (unlikely(error)) {
|
||||
dev_dbg(ssb_sdio_dev(bus), "%08X <- %02x, error %d\n",
|
||||
addr, val, error);
|
||||
}
|
||||
|
||||
return error;
|
||||
}
|
||||
|
||||
#if 0
|
||||
static u8 ssb_sdio_readb(struct ssb_bus *bus, unsigned int addr)
|
||||
{
|
||||
u8 val;
|
||||
int error = 0;
|
||||
|
||||
val = sdio_readb(bus->host_sdio, addr, &error);
|
||||
if (unlikely(error)) {
|
||||
dev_dbg(ssb_sdio_dev(bus), "%08X -> %02x, error %d\n",
|
||||
addr, val, error);
|
||||
}
|
||||
|
||||
return val;
|
||||
}
|
||||
#endif
|
||||
|
||||
/* host claimed */
|
||||
static int ssb_sdio_set_sbaddr_window(struct ssb_bus *bus, u32 address)
|
||||
{
|
||||
int error;
|
||||
|
||||
error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRLOW,
|
||||
(address >> 8) & SBSDIO_SBADDRLOW_MASK);
|
||||
if (error)
|
||||
goto out;
|
||||
error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRMID,
|
||||
(address >> 16) & SBSDIO_SBADDRMID_MASK);
|
||||
if (error)
|
||||
goto out;
|
||||
error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRHIGH,
|
||||
(address >> 24) & SBSDIO_SBADDRHIGH_MASK);
|
||||
if (error)
|
||||
goto out;
|
||||
bus->sdio_sbaddr = address;
|
||||
out:
|
||||
if (error) {
|
||||
dev_dbg(ssb_sdio_dev(bus), "failed to set address window"
|
||||
" to 0x%08x, error %d\n", address, error);
|
||||
}
|
||||
|
||||
return error;
|
||||
}
|
||||
|
||||
/* for enumeration use only */
|
||||
u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset)
|
||||
{
|
||||
u32 val;
|
||||
int error;
|
||||
|
||||
sdio_claim_host(bus->host_sdio);
|
||||
val = sdio_readl(bus->host_sdio, offset, &error);
|
||||
sdio_release_host(bus->host_sdio);
|
||||
if (unlikely(error)) {
|
||||
dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %08x, error %d\n",
|
||||
bus->sdio_sbaddr >> 16, offset, val, error);
|
||||
}
|
||||
|
||||
return val;
|
||||
}
|
||||
|
||||
/* for enumeration use only */
|
||||
int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx)
|
||||
{
|
||||
u32 sbaddr;
|
||||
int error;
|
||||
|
||||
sbaddr = (coreidx * SSB_CORE_SIZE) + SSB_ENUM_BASE;
|
||||
sdio_claim_host(bus->host_sdio);
|
||||
error = ssb_sdio_set_sbaddr_window(bus, sbaddr);
|
||||
sdio_release_host(bus->host_sdio);
|
||||
if (error) {
|
||||
dev_err(ssb_sdio_dev(bus), "failed to switch to core %u,"
|
||||
" error %d\n", coreidx, error);
|
||||
goto out;
|
||||
}
|
||||
out:
|
||||
return error;
|
||||
}
|
||||
|
||||
/* host must be already claimed */
|
||||
int ssb_sdio_switch_core(struct ssb_bus *bus, struct ssb_device *dev)
|
||||
{
|
||||
u8 coreidx = dev->core_index;
|
||||
u32 sbaddr;
|
||||
int error = 0;
|
||||
|
||||
sbaddr = (coreidx * SSB_CORE_SIZE) + SSB_ENUM_BASE;
|
||||
if (unlikely(bus->sdio_sbaddr != sbaddr)) {
|
||||
#if SSB_VERBOSE_SDIOCORESWITCH_DEBUG
|
||||
dev_info(ssb_sdio_dev(bus),
|
||||
"switching to %s core, index %d\n",
|
||||
ssb_core_name(dev->id.coreid), coreidx);
|
||||
#endif
|
||||
error = ssb_sdio_set_sbaddr_window(bus, sbaddr);
|
||||
if (error) {
|
||||
dev_dbg(ssb_sdio_dev(bus), "failed to switch to"
|
||||
" core %u, error %d\n", coreidx, error);
|
||||
goto out;
|
||||
}
|
||||
bus->mapped_device = dev;
|
||||
}
|
||||
|
||||
out:
|
||||
return error;
|
||||
}
|
||||
|
||||
static u8 ssb_sdio_read8(struct ssb_device *dev, u16 offset)
|
||||
{
|
||||
struct ssb_bus *bus = dev->bus;
|
||||
u8 val = 0xff;
|
||||
int error = 0;
|
||||
|
||||
sdio_claim_host(bus->host_sdio);
|
||||
if (unlikely(ssb_sdio_switch_core(bus, dev)))
|
||||
goto out;
|
||||
offset |= bus->sdio_sbaddr & 0xffff;
|
||||
offset &= SBSDIO_SB_OFT_ADDR_MASK;
|
||||
val = sdio_readb(bus->host_sdio, offset, &error);
|
||||
if (error) {
|
||||
dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %02x, error %d\n",
|
||||
bus->sdio_sbaddr >> 16, offset, val, error);
|
||||
}
|
||||
out:
|
||||
sdio_release_host(bus->host_sdio);
|
||||
|
||||
return val;
|
||||
}
|
||||
|
||||
static u16 ssb_sdio_read16(struct ssb_device *dev, u16 offset)
|
||||
{
|
||||
struct ssb_bus *bus = dev->bus;
|
||||
u16 val = 0xffff;
|
||||
int error = 0;
|
||||
|
||||
sdio_claim_host(bus->host_sdio);
|
||||
if (unlikely(ssb_sdio_switch_core(bus, dev)))
|
||||
goto out;
|
||||
offset |= bus->sdio_sbaddr & 0xffff;
|
||||
offset &= SBSDIO_SB_OFT_ADDR_MASK;
|
||||
val = sdio_readw(bus->host_sdio, offset, &error);
|
||||
if (error) {
|
||||
dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %04x, error %d\n",
|
||||
bus->sdio_sbaddr >> 16, offset, val, error);
|
||||
}
|
||||
out:
|
||||
sdio_release_host(bus->host_sdio);
|
||||
|
||||
return val;
|
||||
}
|
||||
|
||||
static u32 ssb_sdio_read32(struct ssb_device *dev, u16 offset)
|
||||
{
|
||||
struct ssb_bus *bus = dev->bus;
|
||||
u32 val = 0xffffffff;
|
||||
int error = 0;
|
||||
|
||||
sdio_claim_host(bus->host_sdio);
|
||||
if (unlikely(ssb_sdio_switch_core(bus, dev)))
|
||||
goto out;
|
||||
offset |= bus->sdio_sbaddr & 0xffff;
|
||||
offset &= SBSDIO_SB_OFT_ADDR_MASK;
|
||||
offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
|
||||
val = sdio_readl(bus->host_sdio, offset, &error);
|
||||
if (error) {
|
||||
dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %08x, error %d\n",
|
||||
bus->sdio_sbaddr >> 16, offset, val, error);
|
||||
}
|
||||
out:
|
||||
sdio_release_host(bus->host_sdio);
|
||||
|
||||
return val;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_SSB_BLOCKIO
|
||||
static void ssb_sdio_block_read(struct ssb_device *dev, void *buffer,
|
||||
size_t count, u16 offset, u8 reg_width)
|
||||
{
|
||||
size_t saved_count = count;
|
||||
struct ssb_bus *bus = dev->bus;
|
||||
int error = 0;
|
||||
|
||||
sdio_claim_host(bus->host_sdio);
|
||||
if (unlikely(ssb_sdio_switch_core(bus, dev))) {
|
||||
error = -EIO;
|
||||
memset(buffer, 0xff, count);
|
||||
goto err_out;
|
||||
}
|
||||
offset |= bus->sdio_sbaddr & 0xffff;
|
||||
offset &= SBSDIO_SB_OFT_ADDR_MASK;
|
||||
|
||||
switch (reg_width) {
|
||||
case sizeof(u8): {
|
||||
error = sdio_readsb(bus->host_sdio, buffer, offset, count);
|
||||
break;
|
||||
}
|
||||
case sizeof(u16): {
|
||||
SSB_WARN_ON(count & 1);
|
||||
error = sdio_readsb(bus->host_sdio, buffer, offset, count);
|
||||
break;
|
||||
}
|
||||
case sizeof(u32): {
|
||||
SSB_WARN_ON(count & 3);
|
||||
offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
|
||||
error = sdio_readsb(bus->host_sdio, buffer, offset, count);
|
||||
break;
|
||||
}
|
||||
default:
|
||||
SSB_WARN_ON(1);
|
||||
}
|
||||
if (!error)
|
||||
goto out;
|
||||
|
||||
err_out:
|
||||
dev_dbg(ssb_sdio_dev(bus), "%04X:%04X (width=%u, len=%u), error %d\n",
|
||||
bus->sdio_sbaddr >> 16, offset, reg_width, saved_count, error);
|
||||
out:
|
||||
sdio_release_host(bus->host_sdio);
|
||||
}
|
||||
#endif /* CONFIG_SSB_BLOCKIO */
|
||||
|
||||
static void ssb_sdio_write8(struct ssb_device *dev, u16 offset, u8 val)
|
||||
{
|
||||
struct ssb_bus *bus = dev->bus;
|
||||
int error = 0;
|
||||
|
||||
sdio_claim_host(bus->host_sdio);
|
||||
if (unlikely(ssb_sdio_switch_core(bus, dev)))
|
||||
goto out;
|
||||
offset |= bus->sdio_sbaddr & 0xffff;
|
||||
offset &= SBSDIO_SB_OFT_ADDR_MASK;
|
||||
sdio_writeb(bus->host_sdio, val, offset, &error);
|
||||
if (error) {
|
||||
dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %02x, error %d\n",
|
||||
bus->sdio_sbaddr >> 16, offset, val, error);
|
||||
}
|
||||
out:
|
||||
sdio_release_host(bus->host_sdio);
|
||||
}
|
||||
|
||||
static void ssb_sdio_write16(struct ssb_device *dev, u16 offset, u16 val)
|
||||
{
|
||||
struct ssb_bus *bus = dev->bus;
|
||||
int error = 0;
|
||||
|
||||
sdio_claim_host(bus->host_sdio);
|
||||
if (unlikely(ssb_sdio_switch_core(bus, dev)))
|
||||
goto out;
|
||||
offset |= bus->sdio_sbaddr & 0xffff;
|
||||
offset &= SBSDIO_SB_OFT_ADDR_MASK;
|
||||
sdio_writew(bus->host_sdio, val, offset, &error);
|
||||
if (error) {
|
||||
dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %04x, error %d\n",
|
||||
bus->sdio_sbaddr >> 16, offset, val, error);
|
||||
}
|
||||
out:
|
||||
sdio_release_host(bus->host_sdio);
|
||||
}
|
||||
|
||||
static void ssb_sdio_write32(struct ssb_device *dev, u16 offset, u32 val)
|
||||
{
|
||||
struct ssb_bus *bus = dev->bus;
|
||||
int error = 0;
|
||||
|
||||
sdio_claim_host(bus->host_sdio);
|
||||
if (unlikely(ssb_sdio_switch_core(bus, dev)))
|
||||
goto out;
|
||||
offset |= bus->sdio_sbaddr & 0xffff;
|
||||
offset &= SBSDIO_SB_OFT_ADDR_MASK;
|
||||
offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
|
||||
sdio_writel(bus->host_sdio, val, offset, &error);
|
||||
if (error) {
|
||||
dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %08x, error %d\n",
|
||||
bus->sdio_sbaddr >> 16, offset, val, error);
|
||||
}
|
||||
if (bus->quirks & SSB_QUIRK_SDIO_READ_AFTER_WRITE32)
|
||||
sdio_readl(bus->host_sdio, 0, &error);
|
||||
out:
|
||||
sdio_release_host(bus->host_sdio);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_SSB_BLOCKIO
|
||||
static void ssb_sdio_block_write(struct ssb_device *dev, const void *buffer,
|
||||
size_t count, u16 offset, u8 reg_width)
|
||||
{
|
||||
size_t saved_count = count;
|
||||
struct ssb_bus *bus = dev->bus;
|
||||
int error = 0;
|
||||
|
||||
sdio_claim_host(bus->host_sdio);
|
||||
if (unlikely(ssb_sdio_switch_core(bus, dev))) {
|
||||
error = -EIO;
|
||||
memset((void *)buffer, 0xff, count);
|
||||
goto err_out;
|
||||
}
|
||||
offset |= bus->sdio_sbaddr & 0xffff;
|
||||
offset &= SBSDIO_SB_OFT_ADDR_MASK;
|
||||
|
||||
switch (reg_width) {
|
||||
case sizeof(u8):
|
||||
error = sdio_writesb(bus->host_sdio, offset,
|
||||
(void *)buffer, count);
|
||||
break;
|
||||
case sizeof(u16):
|
||||
SSB_WARN_ON(count & 1);
|
||||
error = sdio_writesb(bus->host_sdio, offset,
|
||||
(void *)buffer, count);
|
||||
break;
|
||||
case sizeof(u32):
|
||||
SSB_WARN_ON(count & 3);
|
||||
offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
|
||||
error = sdio_writesb(bus->host_sdio, offset,
|
||||
(void *)buffer, count);
|
||||
break;
|
||||
default:
|
||||
SSB_WARN_ON(1);
|
||||
}
|
||||
if (!error)
|
||||
goto out;
|
||||
|
||||
err_out:
|
||||
dev_dbg(ssb_sdio_dev(bus), "%04X:%04X (width=%u, len=%u), error %d\n",
|
||||
bus->sdio_sbaddr >> 16, offset, reg_width, saved_count, error);
|
||||
out:
|
||||
sdio_release_host(bus->host_sdio);
|
||||
}
|
||||
|
||||
#endif /* CONFIG_SSB_BLOCKIO */
|
||||
|
||||
/* Not "static", as it's used in main.c */
|
||||
const struct ssb_bus_ops ssb_sdio_ops = {
|
||||
.read8 = ssb_sdio_read8,
|
||||
.read16 = ssb_sdio_read16,
|
||||
.read32 = ssb_sdio_read32,
|
||||
.write8 = ssb_sdio_write8,
|
||||
.write16 = ssb_sdio_write16,
|
||||
.write32 = ssb_sdio_write32,
|
||||
#ifdef CONFIG_SSB_BLOCKIO
|
||||
.block_read = ssb_sdio_block_read,
|
||||
.block_write = ssb_sdio_block_write,
|
||||
#endif
|
||||
};
|
||||
|
||||
#define GOTO_ERROR_ON(condition, description) do { \
|
||||
if (unlikely(condition)) { \
|
||||
error_description = description; \
|
||||
goto error; \
|
||||
} \
|
||||
} while (0)
|
||||
|
||||
int ssb_sdio_get_invariants(struct ssb_bus *bus,
|
||||
struct ssb_init_invariants *iv)
|
||||
{
|
||||
struct ssb_sprom *sprom = &iv->sprom;
|
||||
struct ssb_boardinfo *bi = &iv->boardinfo;
|
||||
const char *error_description = "none";
|
||||
struct sdio_func_tuple *tuple;
|
||||
void *mac;
|
||||
|
||||
memset(sprom, 0xFF, sizeof(*sprom));
|
||||
sprom->boardflags_lo = 0;
|
||||
sprom->boardflags_hi = 0;
|
||||
|
||||
tuple = bus->host_sdio->tuples;
|
||||
while (tuple) {
|
||||
switch (tuple->code) {
|
||||
case 0x22: /* extended function */
|
||||
switch (tuple->data[0]) {
|
||||
case CISTPL_FUNCE_LAN_NODE_ID:
|
||||
GOTO_ERROR_ON((tuple->size != 7) &&
|
||||
(tuple->data[1] != 6),
|
||||
"mac tpl size");
|
||||
/* fetch the MAC address. */
|
||||
mac = tuple->data + 2;
|
||||
memcpy(sprom->il0mac, mac, ETH_ALEN);
|
||||
memcpy(sprom->et1mac, mac, ETH_ALEN);
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
break;
|
||||
case 0x80: /* vendor specific tuple */
|
||||
switch (tuple->data[0]) {
|
||||
case SSB_SDIO_CIS_SROMREV:
|
||||
GOTO_ERROR_ON(tuple->size != 2,
|
||||
"sromrev tpl size");
|
||||
sprom->revision = tuple->data[1];
|
||||
break;
|
||||
case SSB_SDIO_CIS_ID:
|
||||
GOTO_ERROR_ON((tuple->size != 5) &&
|
||||
(tuple->size != 7),
|
||||
"id tpl size");
|
||||
bi->vendor = tuple->data[1] |
|
||||
(tuple->data[2]<<8);
|
||||
break;
|
||||
case SSB_SDIO_CIS_BOARDREV:
|
||||
GOTO_ERROR_ON(tuple->size != 2,
|
||||
"boardrev tpl size");
|
||||
sprom->board_rev = tuple->data[1];
|
||||
break;
|
||||
case SSB_SDIO_CIS_PA:
|
||||
GOTO_ERROR_ON((tuple->size != 9) &&
|
||||
(tuple->size != 10),
|
||||
"pa tpl size");
|
||||
sprom->pa0b0 = tuple->data[1] |
|
||||
((u16)tuple->data[2] << 8);
|
||||
sprom->pa0b1 = tuple->data[3] |
|
||||
((u16)tuple->data[4] << 8);
|
||||
sprom->pa0b2 = tuple->data[5] |
|
||||
((u16)tuple->data[6] << 8);
|
||||
sprom->itssi_a = tuple->data[7];
|
||||
sprom->itssi_bg = tuple->data[7];
|
||||
sprom->maxpwr_a = tuple->data[8];
|
||||
sprom->maxpwr_bg = tuple->data[8];
|
||||
break;
|
||||
case SSB_SDIO_CIS_OEMNAME:
|
||||
/* Not present */
|
||||
break;
|
||||
case SSB_SDIO_CIS_CCODE:
|
||||
GOTO_ERROR_ON(tuple->size != 2,
|
||||
"ccode tpl size");
|
||||
sprom->country_code = tuple->data[1];
|
||||
break;
|
||||
case SSB_SDIO_CIS_ANTENNA:
|
||||
GOTO_ERROR_ON(tuple->size != 2,
|
||||
"ant tpl size");
|
||||
sprom->ant_available_a = tuple->data[1];
|
||||
sprom->ant_available_bg = tuple->data[1];
|
||||
break;
|
||||
case SSB_SDIO_CIS_ANTGAIN:
|
||||
GOTO_ERROR_ON(tuple->size != 2,
|
||||
"antg tpl size");
|
||||
sprom->antenna_gain.ghz24.a0 = tuple->data[1];
|
||||
sprom->antenna_gain.ghz24.a1 = tuple->data[1];
|
||||
sprom->antenna_gain.ghz24.a2 = tuple->data[1];
|
||||
sprom->antenna_gain.ghz24.a3 = tuple->data[1];
|
||||
sprom->antenna_gain.ghz5.a0 = tuple->data[1];
|
||||
sprom->antenna_gain.ghz5.a1 = tuple->data[1];
|
||||
sprom->antenna_gain.ghz5.a2 = tuple->data[1];
|
||||
sprom->antenna_gain.ghz5.a3 = tuple->data[1];
|
||||
break;
|
||||
case SSB_SDIO_CIS_BFLAGS:
|
||||
GOTO_ERROR_ON((tuple->size != 3) &&
|
||||
(tuple->size != 5),
|
||||
"bfl tpl size");
|
||||
sprom->boardflags_lo = tuple->data[1] |
|
||||
((u16)tuple->data[2] << 8);
|
||||
break;
|
||||
case SSB_SDIO_CIS_LEDS:
|
||||
GOTO_ERROR_ON(tuple->size != 5,
|
||||
"leds tpl size");
|
||||
sprom->gpio0 = tuple->data[1];
|
||||
sprom->gpio1 = tuple->data[2];
|
||||
sprom->gpio2 = tuple->data[3];
|
||||
sprom->gpio3 = tuple->data[4];
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
tuple = tuple->next;
|
||||
}
|
||||
|
||||
return 0;
|
||||
error:
|
||||
dev_err(ssb_sdio_dev(bus), "failed to fetch device invariants: %s\n",
|
||||
error_description);
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
void ssb_sdio_exit(struct ssb_bus *bus)
|
||||
{
|
||||
if (bus->bustype != SSB_BUSTYPE_SDIO)
|
||||
return;
|
||||
/* Nothing to do here. */
|
||||
}
|
||||
|
||||
int ssb_sdio_init(struct ssb_bus *bus)
|
||||
{
|
||||
if (bus->bustype != SSB_BUSTYPE_SDIO)
|
||||
return 0;
|
||||
|
||||
bus->sdio_sbaddr = ~0;
|
||||
|
||||
return 0;
|
||||
}
|
@ -114,6 +114,46 @@ static inline int ssb_pcmcia_init(struct ssb_bus *bus)
|
||||
}
|
||||
#endif /* CONFIG_SSB_PCMCIAHOST */
|
||||
|
||||
/* sdio.c */
|
||||
#ifdef CONFIG_SSB_SDIOHOST
|
||||
extern int ssb_sdio_get_invariants(struct ssb_bus *bus,
|
||||
struct ssb_init_invariants *iv);
|
||||
|
||||
extern u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset);
|
||||
extern int ssb_sdio_switch_core(struct ssb_bus *bus, struct ssb_device *dev);
|
||||
extern int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx);
|
||||
extern int ssb_sdio_hardware_setup(struct ssb_bus *bus);
|
||||
extern void ssb_sdio_exit(struct ssb_bus *bus);
|
||||
extern int ssb_sdio_init(struct ssb_bus *bus);
|
||||
|
||||
extern const struct ssb_bus_ops ssb_sdio_ops;
|
||||
#else /* CONFIG_SSB_SDIOHOST */
|
||||
static inline u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
static inline int ssb_sdio_switch_core(struct ssb_bus *bus,
|
||||
struct ssb_device *dev)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
static inline int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
static inline int ssb_sdio_hardware_setup(struct ssb_bus *bus)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
static inline void ssb_sdio_exit(struct ssb_bus *bus)
|
||||
{
|
||||
}
|
||||
static inline int ssb_sdio_init(struct ssb_bus *bus)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
#endif /* CONFIG_SSB_SDIOHOST */
|
||||
|
||||
|
||||
/* scan.c */
|
||||
extern const char *ssb_core_name(u16 coreid);
|
||||
|
@ -238,6 +238,7 @@ enum ssb_bustype {
|
||||
SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */
|
||||
SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */
|
||||
SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */
|
||||
SSB_BUSTYPE_SDIO, /* SSB is connected to SDIO bus */
|
||||
};
|
||||
|
||||
/* board_vendor */
|
||||
@ -270,8 +271,12 @@ struct ssb_bus {
|
||||
|
||||
/* The core in the basic address register window. (PCI bus only) */
|
||||
struct ssb_device *mapped_device;
|
||||
/* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
|
||||
u8 mapped_pcmcia_seg;
|
||||
union {
|
||||
/* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
|
||||
u8 mapped_pcmcia_seg;
|
||||
/* Current SSB base address window for SDIO. */
|
||||
u32 sdio_sbaddr;
|
||||
};
|
||||
/* Lock for core and segment switching.
|
||||
* On PCMCIA-host busses this is used to protect the whole MMIO access. */
|
||||
spinlock_t bar_lock;
|
||||
@ -282,6 +287,11 @@ struct ssb_bus {
|
||||
struct pci_dev *host_pci;
|
||||
/* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
|
||||
struct pcmcia_device *host_pcmcia;
|
||||
/* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */
|
||||
struct sdio_func *host_sdio;
|
||||
|
||||
/* See enum ssb_quirks */
|
||||
unsigned int quirks;
|
||||
|
||||
#ifdef CONFIG_SSB_SPROM
|
||||
/* Mutex to protect the SPROM writing. */
|
||||
@ -336,6 +346,11 @@ struct ssb_bus {
|
||||
#endif /* DEBUG */
|
||||
};
|
||||
|
||||
enum ssb_quirks {
|
||||
/* SDIO connected card requires performing a read after writing a 32-bit value */
|
||||
SSB_QUIRK_SDIO_READ_AFTER_WRITE32 = (1 << 0),
|
||||
};
|
||||
|
||||
/* The initialization-invariants. */
|
||||
struct ssb_init_invariants {
|
||||
/* Versioning information about the PCB. */
|
||||
@ -366,6 +381,12 @@ extern int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
|
||||
struct pcmcia_device *pcmcia_dev,
|
||||
unsigned long baseaddr);
|
||||
#endif /* CONFIG_SSB_PCMCIAHOST */
|
||||
#ifdef CONFIG_SSB_SDIOHOST
|
||||
extern int ssb_bus_sdiobus_register(struct ssb_bus *bus,
|
||||
struct sdio_func *sdio_func,
|
||||
unsigned int quirks);
|
||||
#endif /* CONFIG_SSB_SDIOHOST */
|
||||
|
||||
|
||||
extern void ssb_bus_unregister(struct ssb_bus *bus);
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user