leandrof/linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ARM: dts: imx6ull-colibri: update device trees to support overlays

Browse Source 
Prepare in-tree device trees for out-of-tree device tree overlay support
(eMMC SKU only).

Relocate panel-dpi default to edt,et057090dhu (RGB 18bit VGA 640x480)
to the module-level dtsi and remove it from the carrier board dtsi.

Keep backlight, resistive touch and Atmel maxtouch nodes enabled
for both eMMC and NAND modules.

Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Denys Drozdov
2022-05-06 15:24:09 +02:00
committed by Shawn Guo
parent 8d386fa04d
commit 233edcae44
2 changed files with 27 additions and 33 deletions
Download Patch File Download Diff File Expand all files Collapse all files

29
arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
View File

@@ -29,17 +29,6 @@
clock-frequency = <16000000>; clock-frequency = <16000000>;
}; };
panel: panel {
compatible = "edt,et057090dhu";
backlight = <&bl>;
power-supply = <&reg_3v3>;
port {
panel_in: endpoint {
remote-endpoint = <&lcdif_out>;
};
};
};
reg_3v3: regulator-3v3 { reg_3v3: regulator-3v3 {
compatible = "regulator-fixed"; compatible = "regulator-fixed";
@@ -71,14 +60,6 @@
status = "okay"; status = "okay";
}; };
&bl {
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
power-supply = <&reg_3v3>;
pwms = <&pwm4 0 5000000 1>;
status = "okay";
};
&ecspi1 { &ecspi1 {
status = "okay"; status = "okay";
@@ -107,16 +88,6 @@
}; };
}; };
&lcdif {
status = "okay";
port {
lcdif_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
/* PWM <A> */ /* PWM <A> */
&pwm4 { &pwm4 {
status = "okay"; status = "okay";

31
arch/arm/boot/dts/imx6ull-colibri.dtsi
View File

@@ -11,12 +11,29 @@
ethernet1 = &fec1; ethernet1 = &fec1;
}; };
bl: backlight { backlight: backlight {
compatible = "pwm-backlight"; compatible = "pwm-backlight";
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
enable-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_bl_on>; pinctrl-0 = <&pinctrl_gpio_bl_on>;
enable-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; power-supply = <&reg_3v3>;
status = "disabled"; pwms = <&pwm4 0 5000000 1>;
status = "okay";
};
panel_dpi: panel-dpi {
compatible = "edt,et057090dhu";
backlight = <&backlight>;
power-supply = <&reg_3v3>;
status = "okay";
port {
lcd_panel_in: endpoint {
remote-endpoint = <&lcdif_out>;
};
};
}; };
reg_module_3v3: regulator-module-3v3 { reg_module_3v3: regulator-module-3v3 {
@@ -149,7 +166,7 @@
scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay"; status = "okay";
ad7879@2c { ad7879_ts: touchscreen@2c {
compatible = "adi,ad7879-1"; compatible = "adi,ad7879-1";
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_snvs_ad7879_int>; pinctrl-0 = <&pinctrl_snvs_ad7879_int>;
@@ -170,6 +187,12 @@
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcdif_dat pinctrl-0 = <&pinctrl_lcdif_dat
&pinctrl_lcdif_ctrl>; &pinctrl_lcdif_ctrl>;
port {
lcdif_out: endpoint {
remote-endpoint = <&lcd_panel_in>;
};
};
}; };
&pwm4 { &pwm4 {