leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge branches 'for-3.11/wacom-fixed' and 'for-3.11/wiimote' into for-linus

Browse Source
This commit is contained in:
Jiri Kosina 2013-07-04 15:05:02 +02:00
commit 21796b39c9
10 changed files with 3538 additions and 1528 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

39
Documentation/ABI/testing/sysfs-driver-hid-wiimote
View File

@ -12,7 +12,7 @@ Description: Make it possible to set/get current led state. Reading from it
What: /sys/bus/hid/drivers/wiimote/<dev>/extension
Date: August 2011
KernelVersion: 3.2
Contact: David Herrmann <dh.herrmann@googlemail.com>
Contact: David Herrmann <dh.herrmann@gmail.com>
Description: This file contains the currently connected and initialized
extensions. It can be one of: none, motionp, nunchuck, classic,
motionp+nunchuck, motionp+classic
@ -20,3 +20,40 @@ Description: This file contains the currently connected and initialized
the official Nintendo Nunchuck extension and classic is the
Nintendo Classic Controller extension. The motionp extension can
be combined with the other two.
Starting with kernel-version 3.11 Motion Plus hotplugging is
supported and if detected, it's no longer reported as static
extension. You will get uevent notifications for the motion-plus
device then.
What: /sys/bus/hid/drivers/wiimote/<dev>/devtype
Date: May 2013
KernelVersion: 3.11
Contact: David Herrmann <dh.herrmann@gmail.com>
Description: While a device is initialized by the wiimote driver, we perform
a device detection and signal a "change" uevent after it is
done. This file shows the detected device type. "pending" means
that the detection is still ongoing, "unknown" means, that the
device couldn't be detected or loaded. "generic" means, that the
device couldn't be detected but supports basic Wii Remote
features and can be used.
Other strings for each device-type are available and may be
added if new device-specific detections are added.
Currently supported are:
gen10: First Wii Remote generation
gen20: Second Wii Remote Plus generation (builtin MP)
balanceboard: Wii Balance Board
What: /sys/bus/hid/drivers/wiimote/<dev>/bboard_calib
Date: May 2013
KernelVersion: 3.11
Contact: David Herrmann <dh.herrmann@gmail.com>
Description: This attribute is only provided if the device was detected as a
balance board. It provides a single line with 3 calibration
values for all 4 sensors. The values are separated by colons and
are each 2 bytes long (encoded as 4 digit hexadecimal value).
First, 0kg values for all 4 sensors are written, followed by the
17kg values for all 4 sensors and last the 34kg values for all 4
sensors.
Calibration data is already applied by the kernel to all input
values but may be used by user-space to perform other
transformations.

27
drivers/hid/Kconfig
View File

@ -719,22 +719,29 @@ config HID_WACOM
Support for Wacom Graphire Bluetooth and Intuos4 WL tablets.
config HID_WIIMOTE
tristate "Nintendo Wii Remote support"
tristate "Nintendo Wii / Wii U peripherals"
depends on HID
depends on LEDS_CLASS
select POWER_SUPPLY
select INPUT_FF_MEMLESS
---help---
Support for the Nintendo Wii Remote bluetooth device.
Support for Nintendo Wii and Wii U Bluetooth peripherals. Supported
devices are the Wii Remote and its extension devices, but also devices
based on the Wii Remote like the Wii U Pro Controller or the
Wii Balance Board.
config HID_WIIMOTE_EXT
bool "Nintendo Wii Remote Extension support"
depends on HID_WIIMOTE
default HID_WIIMOTE
---help---
Support for extension controllers of the Nintendo Wii Remote. Say yes
here if you want to use the Nintendo Motion+, Nunchuck or Classic
extension controllers with your Wii Remote.
Support for all official Nintendo extensions is available, however, 3rd
party extensions might not be supported. Please report these devices to:
http://github.com/dvdhrm/xwiimote/issues
Other Nintendo Wii U peripherals that are IEEE 802.11 based (including
the Wii U Gamepad) might be supported in the future. But currently
support is limited to Bluetooth based devices.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called hid-wiimote.
config HID_ZEROPLUS
tristate "Zeroplus based game controller support"

5
drivers/hid/Makefile
View File

@ -28,10 +28,7 @@ ifdef CONFIG_LOGIWHEELS_FF
hid-logitech-y += hid-lg4ff.o
endif
hid-wiimote-y := hid-wiimote-core.o
ifdef CONFIG_HID_WIIMOTE_EXT
hid-wiimote-y += hid-wiimote-ext.o
endif
hid-wiimote-y := hid-wiimote-core.o hid-wiimote-modules.o
ifdef CONFIG_DEBUG_FS
hid-wiimote-y += hid-wiimote-debug.o
endif

14
drivers/hid/hid-wacom.c
View File

@ -46,6 +46,7 @@ struct wacom_data {
__u8 battery_capacity;
__u8 power_raw;
__u8 ps_connected;
__u8 bat_charging;
struct power_supply battery;
struct power_supply ac;
__u8 led_selector;
@ -62,6 +63,7 @@ static enum power_supply_property wacom_battery_props[] = {
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_CAPACITY,
POWER_SUPPLY_PROP_SCOPE,
POWER_SUPPLY_PROP_STATUS,
};
static enum power_supply_property wacom_ac_props[] = {
@ -287,6 +289,15 @@ static int wacom_battery_get_property(struct power_supply *psy,
case POWER_SUPPLY_PROP_CAPACITY:
val->intval = wdata->battery_capacity;
break;
case POWER_SUPPLY_PROP_STATUS:
if (wdata->bat_charging)
val->intval = POWER_SUPPLY_STATUS_CHARGING;
else
if (wdata->battery_capacity == 100 && wdata->ps_connected)
val->intval = POWER_SUPPLY_STATUS_FULL;
else
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
break;
default:
ret = -EINVAL;
break;
@ -727,7 +738,8 @@ static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report,
if (power_raw != wdata->power_raw) {
wdata->power_raw = power_raw;
wdata->battery_capacity = batcap_i4[power_raw & 0x07];
wdata->ps_connected = power_raw & 0x08;
wdata->bat_charging = (power_raw & 0x08) ? 1 : 0;
wdata->ps_connected = (power_raw & 0x10) ? 1 : 0;
}
break;

1798
drivers/hid/hid-wiimote-core.c
View File

File diff suppressed because it is too large Load Diff

14
drivers/hid/hid-wiimote-debug.c
View File

@ -1,6 +1,6 @@
/*
* Debug support for HID Nintendo Wiimote devices
* Copyright (c) 2011 David Herrmann
* Debug support for HID Nintendo Wii / Wii U peripherals
* Copyright (c) 2011-2013 David Herrmann <dh.herrmann@gmail.com>
*/
/*
@ -127,7 +127,8 @@ static int wiidebug_drm_open(struct inode *i, struct file *f)
static ssize_t wiidebug_drm_write(struct file *f, const char __user *u,
size_t s, loff_t *off)
{
struct wiimote_debug *dbg = f->private_data;
struct seq_file *sf = f->private_data;
struct wiimote_debug *dbg = sf->private;
unsigned long flags;
char buf[16];
ssize_t len;
@ -140,7 +141,7 @@ static ssize_t wiidebug_drm_write(struct file *f, const char __user *u,
if (copy_from_user(buf, u, len))
return -EFAULT;
buf[15] = 0;
buf[len] = 0;
for (i = 0; i < WIIPROTO_REQ_MAX; ++i) {
if (!wiidebug_drmmap[i])
@ -150,10 +151,13 @@ static ssize_t wiidebug_drm_write(struct file *f, const char __user *u,
}
if (i == WIIPROTO_REQ_MAX)
i = simple_strtoul(buf, NULL, 10);
i = simple_strtoul(buf, NULL, 16);
spin_lock_irqsave(&dbg->wdata->state.lock, flags);
dbg->wdata->state.flags &= ~WIIPROTO_FLAG_DRM_LOCKED;
wiiproto_req_drm(dbg->wdata, (__u8) i);
if (i != WIIPROTO_REQ_NULL)
dbg->wdata->state.flags |= WIIPROTO_FLAG_DRM_LOCKED;
spin_unlock_irqrestore(&dbg->wdata->state.lock, flags);
return len;

849
drivers/hid/hid-wiimote-ext.c
View File

@ -1,849 +0,0 @@
/*
* HID driver for Nintendo Wiimote extension devices
* Copyright (c) 2011 David Herrmann
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*/
#include <linux/atomic.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
#include "hid-wiimote.h"
struct wiimote_ext {
struct wiimote_data *wdata;
struct work_struct worker;
struct input_dev *input;
struct input_dev *mp_input;
atomic_t opened;
atomic_t mp_opened;
bool plugged;
bool mp_plugged;
bool motionp;
__u8 ext_type;
__u16 calib[4][3];
};
enum wiiext_type {
WIIEXT_NONE, /* placeholder */
WIIEXT_CLASSIC, /* Nintendo classic controller */
WIIEXT_NUNCHUCK, /* Nintendo nunchuck controller */
WIIEXT_BALANCE_BOARD, /* Nintendo balance board controller */
};
enum wiiext_keys {
WIIEXT_KEY_C,
WIIEXT_KEY_Z,
WIIEXT_KEY_A,
WIIEXT_KEY_B,
WIIEXT_KEY_X,
WIIEXT_KEY_Y,
WIIEXT_KEY_ZL,
WIIEXT_KEY_ZR,
WIIEXT_KEY_PLUS,
WIIEXT_KEY_MINUS,
WIIEXT_KEY_HOME,
WIIEXT_KEY_LEFT,
WIIEXT_KEY_RIGHT,
WIIEXT_KEY_UP,
WIIEXT_KEY_DOWN,
WIIEXT_KEY_LT,
WIIEXT_KEY_RT,
WIIEXT_KEY_COUNT
};
static __u16 wiiext_keymap[] = {
BTN_C, /* WIIEXT_KEY_C */
BTN_Z, /* WIIEXT_KEY_Z */
BTN_A, /* WIIEXT_KEY_A */
BTN_B, /* WIIEXT_KEY_B */
BTN_X, /* WIIEXT_KEY_X */
BTN_Y, /* WIIEXT_KEY_Y */
BTN_TL2, /* WIIEXT_KEY_ZL */
BTN_TR2, /* WIIEXT_KEY_ZR */
KEY_NEXT, /* WIIEXT_KEY_PLUS */
KEY_PREVIOUS, /* WIIEXT_KEY_MINUS */
BTN_MODE, /* WIIEXT_KEY_HOME */
KEY_LEFT, /* WIIEXT_KEY_LEFT */
KEY_RIGHT, /* WIIEXT_KEY_RIGHT */
KEY_UP, /* WIIEXT_KEY_UP */
KEY_DOWN, /* WIIEXT_KEY_DOWN */
BTN_TL, /* WIIEXT_KEY_LT */
BTN_TR, /* WIIEXT_KEY_RT */
};
/* disable all extensions */
static void ext_disable(struct wiimote_ext *ext)
{
unsigned long flags;
__u8 wmem = 0x55;
if (!wiimote_cmd_acquire(ext->wdata)) {
wiimote_cmd_write(ext->wdata, 0xa400f0, &wmem, sizeof(wmem));
wiimote_cmd_release(ext->wdata);
}
spin_lock_irqsave(&ext->wdata->state.lock, flags);
ext->motionp = false;
ext->ext_type = WIIEXT_NONE;
wiiproto_req_drm(ext->wdata, WIIPROTO_REQ_NULL);
spin_unlock_irqrestore(&ext->wdata->state.lock, flags);
}
static bool motionp_read(struct wiimote_ext *ext)
{
__u8 rmem[2], wmem;
ssize_t ret;
bool avail = false;
if (!atomic_read(&ext->mp_opened))
return false;
if (wiimote_cmd_acquire(ext->wdata))
return false;
/* initialize motion plus */
wmem = 0x55;
ret = wiimote_cmd_write(ext->wdata, 0xa600f0, &wmem, sizeof(wmem));
if (ret)
goto error;
/* read motion plus ID */
ret = wiimote_cmd_read(ext->wdata, 0xa600fe, rmem, 2);
if (ret == 2 || rmem[1] == 0x5)
avail = true;
error:
wiimote_cmd_release(ext->wdata);
return avail;
}
static __u8 ext_read(struct wiimote_ext *ext)
{
ssize_t ret;
__u8 buf[24], i, j, offs = 0;
__u8 rmem[2], wmem;
__u8 type = WIIEXT_NONE;
if (!ext->plugged || !atomic_read(&ext->opened))
return WIIEXT_NONE;
if (wiimote_cmd_acquire(ext->wdata))
return WIIEXT_NONE;
/* initialize extension */
wmem = 0x55;
ret = wiimote_cmd_write(ext->wdata, 0xa400f0, &wmem, sizeof(wmem));
if (!ret) {
/* disable encryption */
wmem = 0x0;
wiimote_cmd_write(ext->wdata, 0xa400fb, &wmem, sizeof(wmem));
}
/* read extension ID */
ret = wiimote_cmd_read(ext->wdata, 0xa400fe, rmem, 2);
if (ret == 2) {
if (rmem[0] == 0 && rmem[1] == 0)
type = WIIEXT_NUNCHUCK;
else if (rmem[0] == 0x01 && rmem[1] == 0x01)
type = WIIEXT_CLASSIC;
else if (rmem[0] == 0x04 && rmem[1] == 0x02)
type = WIIEXT_BALANCE_BOARD;
}
/* get balance board calibration data */
if (type == WIIEXT_BALANCE_BOARD) {
ret = wiimote_cmd_read(ext->wdata, 0xa40024, buf, 12);
ret += wiimote_cmd_read(ext->wdata, 0xa40024 + 12,
buf + 12, 12);
if (ret != 24) {
type = WIIEXT_NONE;
} else {
for (i = 0; i < 3; i++) {
for (j = 0; j < 4; j++) {
ext->calib[j][i] = buf[offs];
ext->calib[j][i] <<= 8;
ext->calib[j][i] |= buf[offs + 1];
offs += 2;
}
}
}
}
wiimote_cmd_release(ext->wdata);
return type;
}
static void ext_enable(struct wiimote_ext *ext, bool motionp, __u8 ext_type)
{
unsigned long flags;
__u8 wmem;
int ret;
if (motionp) {
if (wiimote_cmd_acquire(ext->wdata))
return;
if (ext_type == WIIEXT_CLASSIC)
wmem = 0x07;
else if (ext_type == WIIEXT_NUNCHUCK)
wmem = 0x05;
else
wmem = 0x04;
ret = wiimote_cmd_write(ext->wdata, 0xa600fe, &wmem, sizeof(wmem));
wiimote_cmd_release(ext->wdata);
if (ret)
return;
}
spin_lock_irqsave(&ext->wdata->state.lock, flags);
ext->motionp = motionp;
ext->ext_type = ext_type;
wiiproto_req_drm(ext->wdata, WIIPROTO_REQ_NULL);
spin_unlock_irqrestore(&ext->wdata->state.lock, flags);
}
static void wiiext_worker(struct work_struct *work)
{
struct wiimote_ext *ext = container_of(work, struct wiimote_ext,
worker);
bool motionp;
__u8 ext_type;
ext_disable(ext);
motionp = motionp_read(ext);
ext_type = ext_read(ext);
ext_enable(ext, motionp, ext_type);
}
/* schedule work only once, otherwise mark for reschedule */
static void wiiext_schedule(struct wiimote_ext *ext)
{
schedule_work(&ext->worker);
}
/*
* Reacts on extension port events
* Whenever the driver gets an event from the wiimote that an extension has been
* plugged or unplugged, this funtion shall be called. It checks what extensions
* are connected and initializes and activates them.
* This can be called in atomic context. The initialization is done in a
* separate worker thread. The state.lock spinlock must be held by the caller.
*/
void wiiext_event(struct wiimote_data *wdata, bool plugged)
{
if (!wdata->ext)
return;
if (wdata->ext->plugged == plugged)
return;
wdata->ext->plugged = plugged;
if (!plugged)
wdata->ext->mp_plugged = false;
/*
* We need to call wiiext_schedule(wdata->ext) here, however, the
* extension initialization logic is not fully understood and so
* automatic initialization is not supported, yet.
*/
}
/*
* Returns true if the current DRM mode should contain extension data and false
* if there is no interest in extension data.
* All supported extensions send 6 byte extension data so any DRM that contains
* extension bytes is fine.
* The caller must hold the state.lock spinlock.
*/
bool wiiext_active(struct wiimote_data *wdata)
{
if (!wdata->ext)
return false;
return wdata->ext->motionp || wdata->ext->ext_type;
}
static void handler_motionp(struct wiimote_ext *ext, const __u8 *payload)
{
__s32 x, y, z;
bool plugged;
/* | 8 7 6 5 4 3 | 2 | 1 |
* -----+------------------------------+-----+-----+
* 1 | Yaw Speed <7:0> |
* 2 | Roll Speed <7:0> |
* 3 | Pitch Speed <7:0> |
* -----+------------------------------+-----+-----+
* 4 | Yaw Speed <13:8> | Yaw |Pitch|
* -----+------------------------------+-----+-----+
* 5 | Roll Speed <13:8> |Roll | Ext |
* -----+------------------------------+-----+-----+
* 6 | Pitch Speed <13:8> | 1 | 0 |
* -----+------------------------------+-----+-----+
* The single bits Yaw, Roll, Pitch in the lower right corner specify
* whether the wiimote is rotating fast (0) or slow (1). Speed for slow
* roation is 440 deg/s and for fast rotation 2000 deg/s. To get a
* linear scale we multiply by 2000/440 = ~4.5454 which is 18 for fast
* and 9 for slow.
* If the wiimote is not rotating the sensor reports 2^13 = 8192.
* Ext specifies whether an extension is connected to the motionp.
*/
x = payload[0];
y = payload[1];
z = payload[2];
x |= (((__u16)payload[3]) << 6) & 0xff00;
y |= (((__u16)payload[4]) << 6) & 0xff00;
z |= (((__u16)payload[5]) << 6) & 0xff00;
x -= 8192;
y -= 8192;
z -= 8192;
if (!(payload[3] & 0x02))
x *= 18;
else
x *= 9;
if (!(payload[4] & 0x02))
y *= 18;
else
y *= 9;
if (!(payload[3] & 0x01))
z *= 18;
else
z *= 9;
input_report_abs(ext->mp_input, ABS_RX, x);
input_report_abs(ext->mp_input, ABS_RY, y);
input_report_abs(ext->mp_input, ABS_RZ, z);
input_sync(ext->mp_input);
plugged = payload[5] & 0x01;
if (plugged != ext->mp_plugged)
ext->mp_plugged = plugged;
}
static void handler_nunchuck(struct wiimote_ext *ext, const __u8 *payload)
{
__s16 x, y, z, bx, by;
/* Byte | 8 7 | 6 5 | 4 3 | 2 | 1 |
* -----+----------+---------+---------+----+-----+
* 1 | Button X <7:0> |
* 2 | Button Y <7:0> |
* -----+----------+---------+---------+----+-----+
* 3 | Speed X <9:2> |
* 4 | Speed Y <9:2> |
* 5 | Speed Z <9:2> |
* -----+----------+---------+---------+----+-----+
* 6 | Z <1:0> | Y <1:0> | X <1:0> | BC | BZ |
* -----+----------+---------+---------+----+-----+
* Button X/Y is the analog stick. Speed X, Y and Z are the
* accelerometer data in the same format as the wiimote's accelerometer.
* The 6th byte contains the LSBs of the accelerometer data.
* BC and BZ are the C and Z buttons: 0 means pressed
*
* If reported interleaved with motionp, then the layout changes. The
* 5th and 6th byte changes to:
* -----+-----------------------------------+-----+
* 5 | Speed Z <9:3> | EXT |
* -----+--------+-----+-----+----+----+----+-----+
* 6 |Z <2:1> |Y <1>|X <1>| BC | BZ | 0 | 0 |
* -----+--------+-----+-----+----+----+----+-----+
* All three accelerometer values lose their LSB. The other data is
* still available but slightly moved.
*
* Center data for button values is 128. Center value for accelerometer
* values it 512 / 0x200
*/
bx = payload[0];
by = payload[1];
bx -= 128;
by -= 128;
x = payload[2] << 2;
y = payload[3] << 2;
z = payload[4] << 2;
if (ext->motionp) {
x |= (payload[5] >> 3) & 0x02;
y |= (payload[5] >> 4) & 0x02;
z &= ~0x4;
z |= (payload[5] >> 5) & 0x06;
} else {
x |= (payload[5] >> 2) & 0x03;
y |= (payload[5] >> 4) & 0x03;
z |= (payload[5] >> 6) & 0x03;
}
x -= 0x200;
y -= 0x200;
z -= 0x200;
input_report_abs(ext->input, ABS_HAT0X, bx);
input_report_abs(ext->input, ABS_HAT0Y, by);
input_report_abs(ext->input, ABS_RX, x);
input_report_abs(ext->input, ABS_RY, y);
input_report_abs(ext->input, ABS_RZ, z);
if (ext->motionp) {
input_report_key(ext->input,
wiiext_keymap[WIIEXT_KEY_Z], !(payload[5] & 0x04));
input_report_key(ext->input,
wiiext_keymap[WIIEXT_KEY_C], !(payload[5] & 0x08));
} else {
input_report_key(ext->input,
wiiext_keymap[WIIEXT_KEY_Z], !(payload[5] & 0x01));
input_report_key(ext->input,
wiiext_keymap[WIIEXT_KEY_C], !(payload[5] & 0x02));
}
input_sync(ext->input);
}
static void handler_classic(struct wiimote_ext *ext, const __u8 *payload)
{
__s8 rx, ry, lx, ly, lt, rt;
/* Byte | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 |
* -----+-----+-----+-----+-----+-----+-----+-----+-----+
* 1 | RX <5:4> | LX <5:0> |
* 2 | RX <3:2> | LY <5:0> |
* -----+-----+-----+-----+-----------------------------+
* 3 |RX<1>| LT <5:4> | RY <5:1> |
* -----+-----+-----------+-----------------------------+
* 4 | LT <3:1> | RT <5:1> |
* -----+-----+-----+-----+-----+-----+-----+-----+-----+
* 5 | BDR | BDD | BLT | B- | BH | B+ | BRT | 1 |
* -----+-----+-----+-----+-----+-----+-----+-----+-----+
* 6 | BZL | BB | BY | BA | BX | BZR | BDL | BDU |
* -----+-----+-----+-----+-----+-----+-----+-----+-----+
* All buttons are 0 if pressed
* RX and RY are right analog stick
* LX and LY are left analog stick
* LT is left trigger, RT is right trigger
* BLT is 0 if left trigger is fully pressed
* BRT is 0 if right trigger is fully pressed
* BDR, BDD, BDL, BDU form the D-Pad with right, down, left, up buttons
* BZL is left Z button and BZR is right Z button
* B-, BH, B+ are +, HOME and - buttons
* BB, BY, BA, BX are A, B, X, Y buttons
* LSB of RX, RY, LT, and RT are not transmitted and always 0.
*
* With motionp enabled it changes slightly to this:
* Byte | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 |
* -----+-----+-----+-----+-----+-----+-----+-----+-----+
* 1 | RX <4:3> | LX <5:1> | BDU |
* 2 | RX <2:1> | LY <5:1> | BDL |
* -----+-----+-----+-----+-----------------------+-----+
* 3 |RX<0>| LT <4:3> | RY <4:0> |
* -----+-----+-----------+-----------------------------+
* 4 | LT <2:0> | RT <4:0> |
* -----+-----+-----+-----+-----+-----+-----+-----+-----+
* 5 | BDR | BDD | BLT | B- | BH | B+ | BRT | EXT |
* -----+-----+-----+-----+-----+-----+-----+-----+-----+
* 6 | BZL | BB | BY | BA | BX | BZR | 0 | 0 |
* -----+-----+-----+-----+-----+-----+-----+-----+-----+
* Only the LSBs of LX and LY are lost. BDU and BDL are moved, the rest
* is the same as before.
*/
if (ext->motionp) {
lx = payload[0] & 0x3e;
ly = payload[0] & 0x3e;
} else {
lx = payload[0] & 0x3f;
ly = payload[0] & 0x3f;
}
rx = (payload[0] >> 3) & 0x14;
rx |= (payload[1] >> 5) & 0x06;
rx |= (payload[2] >> 7) & 0x01;
ry = payload[2] & 0x1f;
rt = payload[3] & 0x1f;
lt = (payload[2] >> 2) & 0x18;
lt |= (payload[3] >> 5) & 0x07;
rx <<= 1;
ry <<= 1;
rt <<= 1;
lt <<= 1;
input_report_abs(ext->input, ABS_HAT1X, lx - 0x20);
input_report_abs(ext->input, ABS_HAT1Y, ly - 0x20);
input_report_abs(ext->input, ABS_HAT2X, rx - 0x20);
input_report_abs(ext->input, ABS_HAT2Y, ry - 0x20);
input_report_abs(ext->input, ABS_HAT3X, rt - 0x20);
input_report_abs(ext->input, ABS_HAT3Y, lt - 0x20);
input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_RIGHT],
!!(payload[4] & 0x80));
input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_DOWN],
!!(payload[4] & 0x40));
input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_LT],
!!(payload[4] & 0x20));
input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_MINUS],
!!(payload[4] & 0x10));
input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_HOME],
!!(payload[4] & 0x08));
input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_PLUS],
!!(payload[4] & 0x04));
input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_RT],
!!(payload[4] & 0x02));
input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_ZL],
!!(payload[5] & 0x80));
input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_B],
!!(payload[5] & 0x40));
input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_Y],
!!(payload[5] & 0x20));
input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_A],
!!(payload[5] & 0x10));
input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_X],
!!(payload[5] & 0x08));
input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_ZR],
!!(payload[5] & 0x04));
if (ext->motionp) {
input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_UP],
!!(payload[0] & 0x01));
input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_LEFT],
!!(payload[1] & 0x01));
} else {
input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_UP],
!!(payload[5] & 0x01));
input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_LEFT],
!!(payload[5] & 0x02));
}
input_sync(ext->input);
}
static void handler_balance_board(struct wiimote_ext *ext, const __u8 *payload)
{
__s32 val[4], tmp;
unsigned int i;
/* Byte | 8 7 6 5 4 3 2 1 |
* -----+--------------------------+
* 1 | Top Right <15:8> |
* 2 | Top Right <7:0> |
* -----+--------------------------+
* 3 | Bottom Right <15:8> |
* 4 | Bottom Right <7:0> |
* -----+--------------------------+
* 5 | Top Left <15:8> |
* 6 | Top Left <7:0> |
* -----+--------------------------+
* 7 | Bottom Left <15:8> |
* 8 | Bottom Left <7:0> |
* -----+--------------------------+
*
* These values represent the weight-measurements of the Wii-balance
* board with 16bit precision.
*
* The balance-board is never reported interleaved with motionp.
*/
val[0] = payload[0];
val[0] <<= 8;
val[0] |= payload[1];
val[1] = payload[2];
val[1] <<= 8;
val[1] |= payload[3];
val[2] = payload[4];
val[2] <<= 8;
val[2] |= payload[5];
val[3] = payload[6];
val[3] <<= 8;
val[3] |= payload[7];
/* apply calibration data */
for (i = 0; i < 4; i++) {
if (val[i] < ext->calib[i][1]) {
tmp = val[i] - ext->calib[i][0];
tmp *= 1700;
tmp /= ext->calib[i][1] - ext->calib[i][0];
} else {
tmp = val[i] - ext->calib[i][1];
tmp *= 1700;
tmp /= ext->calib[i][2] - ext->calib[i][1];
tmp += 1700;
}
val[i] = tmp;
}
input_report_abs(ext->input, ABS_HAT0X, val[0]);
input_report_abs(ext->input, ABS_HAT0Y, val[1]);
input_report_abs(ext->input, ABS_HAT1X, val[2]);
input_report_abs(ext->input, ABS_HAT1Y, val[3]);
input_sync(ext->input);
}
/* call this with state.lock spinlock held */
void wiiext_handle(struct wiimote_data *wdata, const __u8 *payload)
{
struct wiimote_ext *ext = wdata->ext;
if (!ext)
return;
if (ext->motionp && (payload[5] & 0x02)) {
handler_motionp(ext, payload);
} else if (ext->ext_type == WIIEXT_NUNCHUCK) {
handler_nunchuck(ext, payload);
} else if (ext->ext_type == WIIEXT_CLASSIC) {
handler_classic(ext, payload);
} else if (ext->ext_type == WIIEXT_BALANCE_BOARD) {
handler_balance_board(ext, payload);
}
}
static ssize_t wiiext_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct wiimote_data *wdata = dev_to_wii(dev);
__u8 type = WIIEXT_NONE;
bool motionp = false;
unsigned long flags;
spin_lock_irqsave(&wdata->state.lock, flags);
if (wdata->ext) {
motionp = wdata->ext->motionp;
type = wdata->ext->ext_type;
}
spin_unlock_irqrestore(&wdata->state.lock, flags);
if (type == WIIEXT_NUNCHUCK) {
if (motionp)
return sprintf(buf, "motionp+nunchuck\n");
else
return sprintf(buf, "nunchuck\n");
} else if (type == WIIEXT_CLASSIC) {
if (motionp)
return sprintf(buf, "motionp+classic\n");
else
return sprintf(buf, "classic\n");
} else if (type == WIIEXT_BALANCE_BOARD) {
if (motionp)
return sprintf(buf, "motionp+balanceboard\n");
else
return sprintf(buf, "balanceboard\n");
} else {
if (motionp)
return sprintf(buf, "motionp\n");
else
return sprintf(buf, "none\n");
}
}
static DEVICE_ATTR(extension, S_IRUGO, wiiext_show, NULL);
static int wiiext_input_open(struct input_dev *dev)
{
struct wiimote_ext *ext = input_get_drvdata(dev);
int ret;
ret = hid_hw_open(ext->wdata->hdev);
if (ret)
return ret;
atomic_inc(&ext->opened);
wiiext_schedule(ext);
return 0;
}
static void wiiext_input_close(struct input_dev *dev)
{
struct wiimote_ext *ext = input_get_drvdata(dev);
atomic_dec(&ext->opened);
wiiext_schedule(ext);
hid_hw_close(ext->wdata->hdev);
}
static int wiiext_mp_open(struct input_dev *dev)
{
struct wiimote_ext *ext = input_get_drvdata(dev);
int ret;
ret = hid_hw_open(ext->wdata->hdev);
if (ret)
return ret;
atomic_inc(&ext->mp_opened);
wiiext_schedule(ext);
return 0;
}
static void wiiext_mp_close(struct input_dev *dev)
{
struct wiimote_ext *ext = input_get_drvdata(dev);
atomic_dec(&ext->mp_opened);
wiiext_schedule(ext);
hid_hw_close(ext->wdata->hdev);
}
/* Initializes the extension driver of a wiimote */
int wiiext_init(struct wiimote_data *wdata)
{
struct wiimote_ext *ext;
unsigned long flags;
int ret, i;
ext = kzalloc(sizeof(*ext), GFP_KERNEL);
if (!ext)
return -ENOMEM;
ext->wdata = wdata;
INIT_WORK(&ext->worker, wiiext_worker);
ext->input = input_allocate_device();
if (!ext->input) {
ret = -ENOMEM;
goto err_input;
}
input_set_drvdata(ext->input, ext);
ext->input->open = wiiext_input_open;
ext->input->close = wiiext_input_close;
ext->input->dev.parent = &wdata->hdev->dev;
ext->input->id.bustype = wdata->hdev->bus;
ext->input->id.vendor = wdata->hdev->vendor;
ext->input->id.product = wdata->hdev->product;
ext->input->id.version = wdata->hdev->version;
ext->input->name = WIIMOTE_NAME " Extension";
set_bit(EV_KEY, ext->input->evbit);
for (i = 0; i < WIIEXT_KEY_COUNT; ++i)
set_bit(wiiext_keymap[i], ext->input->keybit);
set_bit(EV_ABS, ext->input->evbit);
set_bit(ABS_HAT0X, ext->input->absbit);
set_bit(ABS_HAT0Y, ext->input->absbit);
set_bit(ABS_HAT1X, ext->input->absbit);
set_bit(ABS_HAT1Y, ext->input->absbit);
set_bit(ABS_HAT2X, ext->input->absbit);
set_bit(ABS_HAT2Y, ext->input->absbit);
set_bit(ABS_HAT3X, ext->input->absbit);
set_bit(ABS_HAT3Y, ext->input->absbit);
input_set_abs_params(ext->input, ABS_HAT0X, -120, 120, 2, 4);
input_set_abs_params(ext->input, ABS_HAT0Y, -120, 120, 2, 4);
input_set_abs_params(ext->input, ABS_HAT1X, -30, 30, 1, 1);
input_set_abs_params(ext->input, ABS_HAT1Y, -30, 30, 1, 1);
input_set_abs_params(ext->input, ABS_HAT2X, -30, 30, 1, 1);
input_set_abs_params(ext->input, ABS_HAT2Y, -30, 30, 1, 1);
input_set_abs_params(ext->input, ABS_HAT3X, -30, 30, 1, 1);
input_set_abs_params(ext->input, ABS_HAT3Y, -30, 30, 1, 1);
set_bit(ABS_RX, ext->input->absbit);
set_bit(ABS_RY, ext->input->absbit);
set_bit(ABS_RZ, ext->input->absbit);
input_set_abs_params(ext->input, ABS_RX, -500, 500, 2, 4);
input_set_abs_params(ext->input, ABS_RY, -500, 500, 2, 4);
input_set_abs_params(ext->input, ABS_RZ, -500, 500, 2, 4);
ret = input_register_device(ext->input);
if (ret) {
input_free_device(ext->input);
goto err_input;
}
ext->mp_input = input_allocate_device();
if (!ext->mp_input) {
ret = -ENOMEM;
goto err_mp;
}
input_set_drvdata(ext->mp_input, ext);
ext->mp_input->open = wiiext_mp_open;
ext->mp_input->close = wiiext_mp_close;
ext->mp_input->dev.parent = &wdata->hdev->dev;
ext->mp_input->id.bustype = wdata->hdev->bus;
ext->mp_input->id.vendor = wdata->hdev->vendor;
ext->mp_input->id.product = wdata->hdev->product;
ext->mp_input->id.version = wdata->hdev->version;
ext->mp_input->name = WIIMOTE_NAME " Motion+";
set_bit(EV_ABS, ext->mp_input->evbit);
set_bit(ABS_RX, ext->mp_input->absbit);
set_bit(ABS_RY, ext->mp_input->absbit);
set_bit(ABS_RZ, ext->mp_input->absbit);
input_set_abs_params(ext->mp_input, ABS_RX, -160000, 160000, 4, 8);
input_set_abs_params(ext->mp_input, ABS_RY, -160000, 160000, 4, 8);
input_set_abs_params(ext->mp_input, ABS_RZ, -160000, 160000, 4, 8);
ret = input_register_device(ext->mp_input);
if (ret) {
input_free_device(ext->mp_input);
goto err_mp;
}
ret = device_create_file(&wdata->hdev->dev, &dev_attr_extension);
if (ret)
goto err_dev;
spin_lock_irqsave(&wdata->state.lock, flags);
wdata->ext = ext;
spin_unlock_irqrestore(&wdata->state.lock, flags);
return 0;
err_dev:
input_unregister_device(ext->mp_input);
err_mp:
input_unregister_device(ext->input);
err_input:
kfree(ext);
return ret;
}
/* Deinitializes the extension driver of a wiimote */
void wiiext_deinit(struct wiimote_data *wdata)
{
struct wiimote_ext *ext = wdata->ext;
unsigned long flags;
if (!ext)
return;
/*
* We first unset wdata->ext to avoid further input from the wiimote
* core. The worker thread does not access this pointer so it is not
* affected by this.
* We kill the worker after this so it does not get respawned during
* deinitialization.
*/
spin_lock_irqsave(&wdata->state.lock, flags);
wdata->ext = NULL;
spin_unlock_irqrestore(&wdata->state.lock, flags);
device_remove_file(&wdata->hdev->dev, &dev_attr_extension);
input_unregister_device(ext->mp_input);
input_unregister_device(ext->input);
cancel_work_sync(&ext->worker);
kfree(ext);
}

2086
drivers/hid/hid-wiimote-modules.c Normal file
View File

File diff suppressed because it is too large Load Diff

217
drivers/hid/hid-wiimote.h
View File

@ -2,8 +2,8 @@
#define __HID_WIIMOTE_H
/*
* HID driver for Nintendo Wiimote devices
* Copyright (c) 2011 David Herrmann
* HID driver for Nintendo Wii / Wii U peripherals
* Copyright (c) 2011-2013 David Herrmann <dh.herrmann@gmail.com>
*/
/*
@ -22,6 +22,7 @@
#include <linux/mutex.h>
#include <linux/power_supply.h>
#include <linux/spinlock.h>
#include <linux/timer.h>
#define WIIMOTE_NAME "Nintendo Wii Remote"
#define WIIMOTE_BUFSIZE 32
@ -35,6 +36,17 @@
#define WIIPROTO_FLAG_IR_BASIC 0x40
#define WIIPROTO_FLAG_IR_EXT 0x80
#define WIIPROTO_FLAG_IR_FULL 0xc0 /* IR_BASIC | IR_EXT */
#define WIIPROTO_FLAG_EXT_PLUGGED 0x0100
#define WIIPROTO_FLAG_EXT_USED 0x0200
#define WIIPROTO_FLAG_EXT_ACTIVE 0x0400
#define WIIPROTO_FLAG_MP_PLUGGED 0x0800
#define WIIPROTO_FLAG_MP_USED 0x1000
#define WIIPROTO_FLAG_MP_ACTIVE 0x2000
#define WIIPROTO_FLAG_EXITING 0x4000
#define WIIPROTO_FLAG_DRM_LOCKED 0x8000
#define WIIPROTO_FLAG_BUILTIN_MP 0x010000
#define WIIPROTO_FLAG_NO_MP 0x020000
#define WIIPROTO_FLAGS_LEDS (WIIPROTO_FLAG_LED1 | WIIPROTO_FLAG_LED2 | \
WIIPROTO_FLAG_LED3 | WIIPROTO_FLAG_LED4)
#define WIIPROTO_FLAGS_IR (WIIPROTO_FLAG_IR_BASIC | WIIPROTO_FLAG_IR_EXT | \
@ -43,16 +55,71 @@
/* return flag for led \num */
#define WIIPROTO_FLAG_LED(num) (WIIPROTO_FLAG_LED1 << (num - 1))
enum wiiproto_keys {
WIIPROTO_KEY_LEFT,
WIIPROTO_KEY_RIGHT,
WIIPROTO_KEY_UP,
WIIPROTO_KEY_DOWN,
WIIPROTO_KEY_PLUS,
WIIPROTO_KEY_MINUS,
WIIPROTO_KEY_ONE,
WIIPROTO_KEY_TWO,
WIIPROTO_KEY_A,
WIIPROTO_KEY_B,
WIIPROTO_KEY_HOME,
WIIPROTO_KEY_COUNT
};
enum wiimote_devtype {
WIIMOTE_DEV_PENDING,
WIIMOTE_DEV_UNKNOWN,
WIIMOTE_DEV_GENERIC,
WIIMOTE_DEV_GEN10,
WIIMOTE_DEV_GEN20,
WIIMOTE_DEV_BALANCE_BOARD,
WIIMOTE_DEV_PRO_CONTROLLER,
WIIMOTE_DEV_NUM,
};
enum wiimote_exttype {
WIIMOTE_EXT_NONE,
WIIMOTE_EXT_UNKNOWN,
WIIMOTE_EXT_NUNCHUK,
WIIMOTE_EXT_CLASSIC_CONTROLLER,
WIIMOTE_EXT_BALANCE_BOARD,
WIIMOTE_EXT_PRO_CONTROLLER,
WIIMOTE_EXT_NUM,
};
enum wiimote_mptype {
WIIMOTE_MP_NONE,
WIIMOTE_MP_UNKNOWN,
WIIMOTE_MP_SINGLE,
WIIMOTE_MP_PASSTHROUGH_NUNCHUK,
WIIMOTE_MP_PASSTHROUGH_CLASSIC,
};
struct wiimote_buf {
__u8 data[HID_MAX_BUFFER_SIZE];
size_t size;
};
struct wiimote_queue {
spinlock_t lock;
struct work_struct worker;
__u8 head;
__u8 tail;
struct wiimote_buf outq[WIIMOTE_BUFSIZE];
};
struct wiimote_state {
spinlock_t lock;
__u8 flags;
__u32 flags;
__u8 accel_split[2];
__u8 drm;
__u8 devtype;
__u8 exttype;
__u8 mp;
/* synchronous cmd requests */
struct mutex sync;
@ -65,6 +132,9 @@ struct wiimote_state {
__u8 cmd_err;
__u8 *cmd_read_buf;
__u8 cmd_read_size;
/* calibration data */
__u16 calib_bboard[4][3];
};
struct wiimote_data {
@ -74,18 +144,63 @@ struct wiimote_data {
struct input_dev *accel;
struct input_dev *ir;
struct power_supply battery;
struct wiimote_ext *ext;
struct input_dev *mp;
struct timer_list timer;
struct wiimote_debug *debug;
spinlock_t qlock;
__u8 head;
__u8 tail;
struct wiimote_buf outq[WIIMOTE_BUFSIZE];
struct work_struct worker;
union {
struct input_dev *input;
} extension;
struct wiimote_queue queue;
struct wiimote_state state;
struct work_struct init_worker;
};
/* wiimote modules */
enum wiimod_module {
WIIMOD_KEYS,
WIIMOD_RUMBLE,
WIIMOD_BATTERY,
WIIMOD_LED1,
WIIMOD_LED2,
WIIMOD_LED3,
WIIMOD_LED4,
WIIMOD_ACCEL,
WIIMOD_IR,
WIIMOD_BUILTIN_MP,
WIIMOD_NO_MP,
WIIMOD_NUM,
WIIMOD_NULL = WIIMOD_NUM,
};
#define WIIMOD_FLAG_INPUT 0x0001
#define WIIMOD_FLAG_EXT8 0x0002
#define WIIMOD_FLAG_EXT16 0x0004
struct wiimod_ops {
__u16 flags;
unsigned long arg;
int (*probe) (const struct wiimod_ops *ops,
struct wiimote_data *wdata);
void (*remove) (const struct wiimod_ops *ops,
struct wiimote_data *wdata);
void (*in_keys) (struct wiimote_data *wdata, const __u8 *keys);
void (*in_accel) (struct wiimote_data *wdata, const __u8 *accel);
void (*in_ir) (struct wiimote_data *wdata, const __u8 *ir, bool packed,
unsigned int id);
void (*in_mp) (struct wiimote_data *wdata, const __u8 *mp);
void (*in_ext) (struct wiimote_data *wdata, const __u8 *ext);
};
extern const struct wiimod_ops *wiimod_table[WIIMOD_NUM];
extern const struct wiimod_ops *wiimod_ext_table[WIIMOTE_EXT_NUM];
extern const struct wiimod_ops wiimod_mp;
/* wiimote requests */
enum wiiproto_reqs {
WIIPROTO_REQ_NULL = 0x0,
WIIPROTO_REQ_RUMBLE = 0x10,
@ -99,24 +214,55 @@ enum wiiproto_reqs {
WIIPROTO_REQ_STATUS = 0x20,
WIIPROTO_REQ_DATA = 0x21,
WIIPROTO_REQ_RETURN = 0x22,
/* DRM_K: BB*2 */
WIIPROTO_REQ_DRM_K = 0x30,
/* DRM_KA: BB*2 AA*3 */
WIIPROTO_REQ_DRM_KA = 0x31,
/* DRM_KE: BB*2 EE*8 */
WIIPROTO_REQ_DRM_KE = 0x32,
/* DRM_KAI: BB*2 AA*3 II*12 */
WIIPROTO_REQ_DRM_KAI = 0x33,
/* DRM_KEE: BB*2 EE*19 */
WIIPROTO_REQ_DRM_KEE = 0x34,
/* DRM_KAE: BB*2 AA*3 EE*16 */
WIIPROTO_REQ_DRM_KAE = 0x35,
/* DRM_KIE: BB*2 II*10 EE*9 */
WIIPROTO_REQ_DRM_KIE = 0x36,
/* DRM_KAIE: BB*2 AA*3 II*10 EE*6 */
WIIPROTO_REQ_DRM_KAIE = 0x37,
/* DRM_E: EE*21 */
WIIPROTO_REQ_DRM_E = 0x3d,
/* DRM_SKAI1: BB*2 AA*1 II*18 */
WIIPROTO_REQ_DRM_SKAI1 = 0x3e,
/* DRM_SKAI2: BB*2 AA*1 II*18 */
WIIPROTO_REQ_DRM_SKAI2 = 0x3f,
WIIPROTO_REQ_MAX
};
#define dev_to_wii(pdev) hid_get_drvdata(container_of(pdev, struct hid_device, \
dev))
void __wiimote_schedule(struct wiimote_data *wdata);
extern void wiiproto_req_drm(struct wiimote_data *wdata, __u8 drm);
extern void wiiproto_req_rumble(struct wiimote_data *wdata, __u8 rumble);
extern void wiiproto_req_leds(struct wiimote_data *wdata, int leds);
extern void wiiproto_req_status(struct wiimote_data *wdata);
extern void wiiproto_req_accel(struct wiimote_data *wdata, __u8 accel);
extern void wiiproto_req_ir1(struct wiimote_data *wdata, __u8 flags);
extern void wiiproto_req_ir2(struct wiimote_data *wdata, __u8 flags);
extern int wiimote_cmd_write(struct wiimote_data *wdata, __u32 offset,
const __u8 *wmem, __u8 size);
extern ssize_t wiimote_cmd_read(struct wiimote_data *wdata, __u32 offset,
@ -129,24 +275,6 @@ extern ssize_t wiimote_cmd_read(struct wiimote_data *wdata, __u32 offset,
extern void wiiproto_req_rmem(struct wiimote_data *wdata, bool eeprom,
__u32 offset, __u16 size);
#ifdef CONFIG_HID_WIIMOTE_EXT
extern int wiiext_init(struct wiimote_data *wdata);
extern void wiiext_deinit(struct wiimote_data *wdata);
extern void wiiext_event(struct wiimote_data *wdata, bool plugged);
extern bool wiiext_active(struct wiimote_data *wdata);
extern void wiiext_handle(struct wiimote_data *wdata, const __u8 *payload);
#else
static inline int wiiext_init(void *u) { return 0; }
static inline void wiiext_deinit(void *u) { }
static inline void wiiext_event(void *u, bool p) { }
static inline bool wiiext_active(void *u) { return false; }
static inline void wiiext_handle(void *u, const __u8 *p) { }
#endif
#ifdef CONFIG_DEBUG_FS
extern int wiidebug_init(struct wiimote_data *wdata);
@ -173,11 +301,26 @@ static inline void wiimote_cmd_complete(struct wiimote_data *wdata)
complete(&wdata->state.ready);
}
/* requires the state.lock spinlock to be held */
static inline void wiimote_cmd_abort(struct wiimote_data *wdata)
{
/* Abort synchronous request by waking up the sleeping caller. But
* reset the state.cmd field to an invalid value so no further event
* handlers will work with it. */
wdata->state.cmd = WIIPROTO_REQ_MAX;
complete(&wdata->state.ready);
}
static inline int wiimote_cmd_acquire(struct wiimote_data *wdata)
{
return mutex_lock_interruptible(&wdata->state.sync) ? -ERESTARTSYS : 0;
}
static inline void wiimote_cmd_acquire_noint(struct wiimote_data *wdata)
{
mutex_lock(&wdata->state.sync);
}
/* requires the state.lock spinlock to be held */
static inline void wiimote_cmd_set(struct wiimote_data *wdata, int cmd,
__u32 opt)
@ -196,11 +339,31 @@ static inline int wiimote_cmd_wait(struct wiimote_data *wdata)
{
int ret;
/* The completion acts as implicit memory barrier so we can safely
* assume that state.cmd is set on success/failure and isn't accessed
* by any other thread, anymore. */
ret = wait_for_completion_interruptible_timeout(&wdata->state.ready, HZ);
if (ret < 0)
return -ERESTARTSYS;
else if (ret == 0)
return -EIO;
else if (wdata->state.cmd != WIIPROTO_REQ_NULL)
return -EIO;
else
return 0;
}
static inline int wiimote_cmd_wait_noint(struct wiimote_data *wdata)
{
unsigned long ret;
/* no locking needed; see wiimote_cmd_wait() */
ret = wait_for_completion_timeout(&wdata->state.ready, HZ);
if (!ret)
return -EIO;
else if (wdata->state.cmd != WIIPROTO_REQ_NULL)
return -EIO;
else
return 0;
}

17
include/uapi/linux/input.h
View File

@ -506,11 +506,15 @@ struct input_keymap_entry {
#define BTN_DEAD 0x12f
#define BTN_GAMEPAD 0x130
#define BTN_A 0x130
#define BTN_B 0x131
#define BTN_SOUTH 0x130
#define BTN_A BTN_SOUTH
#define BTN_EAST 0x131
#define BTN_B BTN_EAST
#define BTN_C 0x132
#define BTN_X 0x133
#define BTN_Y 0x134
#define BTN_NORTH 0x133
#define BTN_X BTN_NORTH
#define BTN_WEST 0x134
#define BTN_Y BTN_WEST
#define BTN_Z 0x135
#define BTN_TL 0x136
#define BTN_TR 0x137
@ -707,6 +711,11 @@ struct input_keymap_entry {
#define KEY_ATTENDANT_TOGGLE 0x21d /* Attendant call on or off */
#define KEY_LIGHTS_TOGGLE 0x21e /* Reading light on or off */
#define BTN_DPAD_UP 0x220
#define BTN_DPAD_DOWN 0x221
#define BTN_DPAD_LEFT 0x222
#define BTN_DPAD_RIGHT 0x223
#define BTN_TRIGGER_HAPPY 0x2c0
#define BTN_TRIGGER_HAPPY1 0x2c0
#define BTN_TRIGGER_HAPPY2 0x2c1