leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge branch 'master'

Browse Source
This commit is contained in:
Kyle McMartin 2005-11-18 16:39:20 -05:00
commit 2161558fa5
82 changed files with 2048 additions and 7079 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
Documentation/00-INDEX
View File

@ -24,6 +24,8 @@ DMA-mapping.txt
- info for PCI drivers using DMA portably across all platforms.
DocBook/
- directory with DocBook templates etc. for kernel documentation.
HOWTO
- The process and procedures of how to do Linux kernel development.
IO-mapping.txt
- how to access I/O mapped memory from within device drivers.
IPMI.txt
@ -256,6 +258,10 @@ specialix.txt
- info on hardware/driver for specialix IO8+ multiport serial card.
spinlocks.txt
- info on using spinlocks to provide exclusive access in kernel.
stable_api_nonsense.txt
- info on why the kernel does not have a stable in-kernel api or abi.
stable_kernel_rules.txt
- rules and procedures for the -stable kernel releases.
stallion.txt
- info on using the Stallion multiport serial driver.
svga.txt

618
Documentation/HOWTO Normal file
View File

@ -0,0 +1,618 @@
HOWTO do Linux kernel development
---------------------------------
This is the be-all, end-all document on this topic. It contains
instructions on how to become a Linux kernel developer and how to learn
to work with the Linux kernel development community. It tries to not
contain anything related to the technical aspects of kernel programming,
but will help point you in the right direction for that.
If anything in this document becomes out of date, please send in patches
to the maintainer of this file, who is listed at the bottom of the
document.
Introduction
------------
So, you want to learn how to become a Linux kernel developer? Or you
have been told by your manager, "Go write a Linux driver for this
device." This document's goal is to teach you everything you need to
know to achieve this by describing the process you need to go through,
and hints on how to work with the community. It will also try to
explain some of the reasons why the community works like it does.
The kernel is written mostly in C, with some architecture-dependent
parts written in assembly. A good understanding of C is required for
kernel development. Assembly (any architecture) is not required unless
you plan to do low-level development for that architecture. Though they
are not a good substitute for a solid C education and/or years of
experience, the following books are good for, if anything, reference:
- "The C Programming Language" by Kernighan and Ritchie [Prentice Hall]
- "Practical C Programming" by Steve Oualline [O'Reilly]
The kernel is written using GNU C and the GNU toolchain. While it
adheres to the ISO C89 standard, it uses a number of extensions that are
not featured in the standard. The kernel is a freestanding C
environment, with no reliance on the standard C library, so some
portions of the C standard are not supported. Arbitrary long long
divisions and floating point are not allowed. It can sometimes be
difficult to understand the assumptions the kernel has on the toolchain
and the extensions that it uses, and unfortunately there is no
definitive reference for them. Please check the gcc info pages (`info
gcc`) for some information on them.
Please remember that you are trying to learn how to work with the
existing development community. It is a diverse group of people, with
high standards for coding, style and procedure. These standards have
been created over time based on what they have found to work best for
such a large and geographically dispersed team. Try to learn as much as
possible about these standards ahead of time, as they are well
documented; do not expect people to adapt to you or your company's way
of doing things.
Legal Issues
------------
The Linux kernel source code is released under the GPL. Please see the
file, COPYING, in the main directory of the source tree, for details on
the license. If you have further questions about the license, please
contact a lawyer, and do not ask on the Linux kernel mailing list. The
people on the mailing lists are not lawyers, and you should not rely on
their statements on legal matters.
For common questions and answers about the GPL, please see:
http://www.gnu.org/licenses/gpl-faq.html
Documentation
------------
The Linux kernel source tree has a large range of documents that are
invaluable for learning how to interact with the kernel community. When
new features are added to the kernel, it is recommended that new
documentation files are also added which explain how to use the feature.
When a kernel change causes the interface that the kernel exposes to
userspace to change, it is recommended that you send the information or
a patch to the manual pages explaining the change to the manual pages
maintainer at mtk-manpages@gmx.net.
Here is a list of files that are in the kernel source tree that are
required reading:
README
This file gives a short background on the Linux kernel and describes
what is necessary to do to configure and build the kernel. People
who are new to the kernel should start here.
Documentation/Changes
This file gives a list of the minimum levels of various software
packages that are necessary to build and run the kernel
successfully.
Documentation/CodingStyle
This describes the Linux kernel coding style, and some of the
rationale behind it. All new code is expected to follow the
guidelines in this document. Most maintainers will only accept
patches if these rules are followed, and many people will only
review code if it is in the proper style.
Documentation/SubmittingPatches
Documentation/SubmittingDrivers
These files describe in explicit detail how to successfully create
and send a patch, including (but not limited to):
- Email contents
- Email format
- Who to send it to
Following these rules will not guarantee success (as all patches are
subject to scrutiny for content and style), but not following them
will almost always prevent it.
Other excellent descriptions of how to create patches properly are:
"The Perfect Patch"
http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt
"Linux kernel patch submission format"
http://linux.yyz.us/patch-format.html
Documentation/stable_api_nonsense.txt
This file describes the rationale behind the conscious decision to
not have a stable API within the kernel, including things like:
- Subsystem shim-layers (for compatibility?)
- Driver portability between Operating Systems.
- Mitigating rapid change within the kernel source tree (or
preventing rapid change)
This document is crucial for understanding the Linux development
philosophy and is very important for people moving to Linux from
development on other Operating Systems.
Documentation/SecurityBugs
If you feel you have found a security problem in the Linux kernel,
please follow the steps in this document to help notify the kernel
developers, and help solve the issue.
Documentation/ManagementStyle
This document describes how Linux kernel maintainers operate and the
shared ethos behind their methodologies. This is important reading
for anyone new to kernel development (or anyone simply curious about
it), as it resolves a lot of common misconceptions and confusion
about the unique behavior of kernel maintainers.
Documentation/stable_kernel_rules.txt
This file describes the rules on how the stable kernel releases
happen, and what to do if you want to get a change into one of these
releases.
Documentation/kernel-docs.txt
A list of external documentation that pertains to kernel
development. Please consult this list if you do not find what you
are looking for within the in-kernel documentation.
Documentation/applying-patches.txt
A good introduction describing exactly what a patch is and how to
apply it to the different development branches of the kernel.
The kernel also has a large number of documents that can be
automatically generated from the source code itself. This includes a
full description of the in-kernel API, and rules on how to handle
locking properly. The documents will be created in the
Documentation/DocBook/ directory and can be generated as PDF,
Postscript, HTML, and man pages by running:
make pdfdocs
make psdocs
make htmldocs
make mandocs
respectively from the main kernel source directory.
Becoming A Kernel Developer
---------------------------
If you do not know anything about Linux kernel development, you should
look at the Linux KernelNewbies project:
http://kernelnewbies.org
It consists of a helpful mailing list where you can ask almost any type
of basic kernel development question (make sure to search the archives
first, before asking something that has already been answered in the
past.) It also has an IRC channel that you can use to ask questions in
real-time, and a lot of helpful documentation that is useful for
learning about Linux kernel development.
The website has basic information about code organization, subsystems,
and current projects (both in-tree and out-of-tree). It also describes
some basic logistical information, like how to compile a kernel and
apply a patch.
If you do not know where you want to start, but you want to look for
some task to start doing to join into the kernel development community,
go to the Linux Kernel Janitor's project:
http://janitor.kernelnewbies.org/
It is a great place to start. It describes a list of relatively simple
problems that need to be cleaned up and fixed within the Linux kernel
source tree. Working with the developers in charge of this project, you
will learn the basics of getting your patch into the Linux kernel tree,
and possibly be pointed in the direction of what to go work on next, if
you do not already have an idea.
If you already have a chunk of code that you want to put into the kernel
tree, but need some help getting it in the proper form, the
kernel-mentors project was created to help you out with this. It is a
mailing list, and can be found at:
http://selenic.com/mailman/listinfo/kernel-mentors
Before making any actual modifications to the Linux kernel code, it is
imperative to understand how the code in question works. For this
purpose, nothing is better than reading through it directly (most tricky
bits are commented well), perhaps even with the help of specialized
tools. One such tool that is particularly recommended is the Linux
Cross-Reference project, which is able to present source code in a
self-referential, indexed webpage format. An excellent up-to-date
repository of the kernel code may be found at:
http://sosdg.org/~coywolf/lxr/
The development process
-----------------------
Linux kernel development process currently consists of a few different
main kernel "branches" and lots of different subsystem-specific kernel
branches. These different branches are:
- main 2.6.x kernel tree
- 2.6.x.y -stable kernel tree
- 2.6.x -git kernel patches
- 2.6.x -mm kernel patches
- subsystem specific kernel trees and patches
2.6.x kernel tree
-----------------
2.6.x kernels are maintained by Linus Torvalds, and can be found on
kernel.org in the pub/linux/kernel/v2.6/ directory. Its development
process is as follows:
- As soon as a new kernel is released a two weeks window is open,
during this period of time maintainers can submit big diffs to
Linus, usually the patches that have already been included in the
-mm kernel for a few weeks. The preferred way to submit big changes
is using git (the kernel's source management tool, more information
can be found at http://git.or.cz/) but plain patches are also just
fine.
- After two weeks a -rc1 kernel is released it is now possible to push
only patches that do not include new features that could affect the
stability of the whole kernel. Please note that a whole new driver
(or filesystem) might be accepted after -rc1 because there is no
risk of causing regressions with such a change as long as the change
is self-contained and does not affect areas outside of the code that
is being added. git can be used to send patches to Linus after -rc1
is released, but the patches need to also be sent to a public
mailing list for review.
- A new -rc is released whenever Linus deems the current git tree to
be in a reasonably sane state adequate for testing. The goal is to
release a new -rc kernel every week.
- Process continues until the kernel is considered "ready", the
process should last around 6 weeks.
It is worth mentioning what Andrew Morton wrote on the linux-kernel
mailing list about kernel releases:
"Nobody knows when a kernel will be released, because it's
released according to perceived bug status, not according to a
preconceived timeline."
2.6.x.y -stable kernel tree
---------------------------
Kernels with 4 digit versions are -stable kernels. They contain
relatively small and critical fixes for security problems or significant
regressions discovered in a given 2.6.x kernel.
This is the recommended branch for users who want the most recent stable
kernel and are not interested in helping test development/experimental
versions.
If no 2.6.x.y kernel is available, then the highest numbered 2.6.x
kernel is the current stable kernel.
2.6.x.y are maintained by the "stable" team <stable@kernel.org>, and are
released almost every other week.
The file Documentation/stable_kernel_rules.txt in the kernel tree
documents what kinds of changes are acceptable for the -stable tree, and
how the release process works.
2.6.x -git patches
------------------
These are daily snapshots of Linus' kernel tree which are managed in a
git repository (hence the name.) These patches are usually released
daily and represent the current state of Linus' tree. They are more
experimental than -rc kernels since they are generated automatically
without even a cursory glance to see if they are sane.
2.6.x -mm kernel patches
------------------------
These are experimental kernel patches released by Andrew Morton. Andrew
takes all of the different subsystem kernel trees and patches and mushes
them together, along with a lot of patches that have been plucked from
the linux-kernel mailing list. This tree serves as a proving ground for
new features and patches. Once a patch has proved its worth in -mm for
a while Andrew or the subsystem maintainer pushes it on to Linus for
inclusion in mainline.
It is heavily encouraged that all new patches get tested in the -mm tree
before they are sent to Linus for inclusion in the main kernel tree.
These kernels are not appropriate for use on systems that are supposed
to be stable and they are more risky to run than any of the other
branches.
If you wish to help out with the kernel development process, please test
and use these kernel releases and provide feedback to the linux-kernel
mailing list if you have any problems, and if everything works properly.
In addition to all the other experimental patches, these kernels usually
also contain any changes in the mainline -git kernels available at the
time of release.
The -mm kernels are not released on a fixed schedule, but usually a few
-mm kernels are released in between each -rc kernel (1 to 3 is common).
Subsystem Specific kernel trees and patches
-------------------------------------------
A number of the different kernel subsystem developers expose their
development trees so that others can see what is happening in the
different areas of the kernel. These trees are pulled into the -mm
kernel releases as described above.
Here is a list of some of the different kernel trees available:
git trees:
- Kbuild development tree, Sam Ravnborg <sam@ravnborg.org>
kernel.org:/pub/scm/linux/kernel/git/sam/kbuild.git
- ACPI development tree, Len Brown <len.brown@intel.com>
kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
- Block development tree, Jens Axboe <axboe@suse.de>
kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git
- DRM development tree, Dave Airlie <airlied@linux.ie>
kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6.git
- ia64 development tree, Tony Luck <tony.luck@intel.com>
kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git
- ieee1394 development tree, Jody McIntyre <scjody@modernduck.com>
kernel.org:/pub/scm/linux/kernel/git/scjody/ieee1394.git
- infiniband, Roland Dreier <rolandd@cisco.com>
kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git
- libata, Jeff Garzik <jgarzik@pobox.com>
kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
- network drivers, Jeff Garzik <jgarzik@pobox.com>
kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git
- pcmcia, Dominik Brodowski <linux@dominikbrodowski.net>
kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
- SCSI, James Bottomley <James.Bottomley@SteelEye.com>
kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
Other git kernel trees can be found listed at http://kernel.org/git
quilt trees:
- USB, PCI, Driver Core, and I2C, Greg Kroah-Hartman <gregkh@suse.de>
kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
Bug Reporting
-------------
bugzilla.kernel.org is where the Linux kernel developers track kernel
bugs. Users are encouraged to report all bugs that they find in this
tool. For details on how to use the kernel bugzilla, please see:
http://test.kernel.org/bugzilla/faq.html
The file REPORTING-BUGS in the main kernel source directory has a good
template for how to report a possible kernel bug, and details what kind
of information is needed by the kernel developers to help track down the
problem.
Mailing lists
-------------
As some of the above documents describe, the majority of the core kernel
developers participate on the Linux Kernel Mailing list. Details on how
to subscribe and unsubscribe from the list can be found at:
http://vger.kernel.org/vger-lists.html#linux-kernel
There are archives of the mailing list on the web in many different
places. Use a search engine to find these archives. For example:
http://dir.gmane.org/gmane.linux.kernel
It is highly recommended that you search the archives about the topic
you want to bring up, before you post it to the list. A lot of things
already discussed in detail are only recorded at the mailing list
archives.
Most of the individual kernel subsystems also have their own separate
mailing list where they do their development efforts. See the
MAINTAINERS file for a list of what these lists are for the different
groups.
Many of the lists are hosted on kernel.org. Information on them can be
found at:
http://vger.kernel.org/vger-lists.html
Please remember to follow good behavioral habits when using the lists.
Though a bit cheesy, the following URL has some simple guidelines for
interacting with the list (or any list):
http://www.albion.com/netiquette/
If multiple people respond to your mail, the CC: list of recipients may
get pretty large. Don't remove anybody from the CC: list without a good
reason, or don't reply only to the list address. Get used to receiving the
mail twice, one from the sender and the one from the list, and don't try
to tune that by adding fancy mail-headers, people will not like it.
Remember to keep the context and the attribution of your replies intact,
keep the "John Kernelhacker wrote ...:" lines at the top of your reply, and
add your statements between the individual quoted sections instead of
writing at the top of the mail.
If you add patches to your mail, make sure they are plain readable text
as stated in Documentation/SubmittingPatches. Kernel developers don't
want to deal with attachments or compressed patches; they may want
to comment on individual lines of your patch, which works only that way.
Make sure you use a mail program that does not mangle spaces and tab
characters. A good first test is to send the mail to yourself and try
to apply your own patch by yourself. If that doesn't work, get your
mail program fixed or change it until it works.
Above all, please remember to show respect to other subscribers.
Working with the community
--------------------------
The goal of the kernel community is to provide the best possible kernel
there is. When you submit a patch for acceptance, it will be reviewed
on its technical merits and those alone. So, what should you be
expecting?
- criticism
- comments
- requests for change
- requests for justification
- silence
Remember, this is part of getting your patch into the kernel. You have
to be able to take criticism and comments about your patches, evaluate
them at a technical level and either rework your patches or provide
clear and concise reasoning as to why those changes should not be made.
If there are no responses to your posting, wait a few days and try
again, sometimes things get lost in the huge volume.
What should you not do?
- expect your patch to be accepted without question
- become defensive
- ignore comments
- resubmit the patch without making any of the requested changes
In a community that is looking for the best technical solution possible,
there will always be differing opinions on how beneficial a patch is.
You have to be cooperative, and willing to adapt your idea to fit within
the kernel. Or at least be willing to prove your idea is worth it.
Remember, being wrong is acceptable as long as you are willing to work
toward a solution that is right.
It is normal that the answers to your first patch might simply be a list
of a dozen things you should correct. This does _not_ imply that your
patch will not be accepted, and it is _not_ meant against you
personally. Simply correct all issues raised against your patch and
resend it.
Differences between the kernel community and corporate structures
-----------------------------------------------------------------
The kernel community works differently than most traditional corporate
development environments. Here are a list of things that you can try to
do to try to avoid problems:
Good things to say regarding your proposed changes:
- "This solves multiple problems."
- "This deletes 2000 lines of code."
- "Here is a patch that explains what I am trying to describe."
- "I tested it on 5 different architectures..."
- "Here is a series of small patches that..."
- "This increases performance on typical machines..."
Bad things you should avoid saying:
- "We did it this way in AIX/ptx/Solaris, so therefore it must be
good..."
- "I've being doing this for 20 years, so..."
- "This is required for my company to make money"
- "This is for our Enterprise product line."
- "Here is my 1000 page design document that describes my idea"
- "I've been working on this for 6 months..."
- "Here's a 5000 line patch that..."
- "I rewrote all of the current mess, and here it is..."
- "I have a deadline, and this patch needs to be applied now."
Another way the kernel community is different than most traditional
software engineering work environments is the faceless nature of
interaction. One benefit of using email and irc as the primary forms of
communication is the lack of discrimination based on gender or race.
The Linux kernel work environment is accepting of women and minorities
because all you are is an email address. The international aspect also
helps to level the playing field because you can't guess gender based on
a person's name. A man may be named Andrea and a woman may be named Pat.
Most women who have worked in the Linux kernel and have expressed an
opinion have had positive experiences.
The language barrier can cause problems for some people who are not
comfortable with English. A good grasp of the language can be needed in
order to get ideas across properly on mailing lists, so it is
recommended that you check your emails to make sure they make sense in
English before sending them.
Break up your changes
---------------------
The Linux kernel community does not gladly accept large chunks of code
dropped on it all at once. The changes need to be properly introduced,
discussed, and broken up into tiny, individual portions. This is almost
the exact opposite of what companies are used to doing. Your proposal
should also be introduced very early in the development process, so that
you can receive feedback on what you are doing. It also lets the
community feel that you are working with them, and not simply using them
as a dumping ground for your feature. However, don't send 50 emails at
one time to a mailing list, your patch series should be smaller than
that almost all of the time.
The reasons for breaking things up are the following:
1) Small patches increase the likelihood that your patches will be
applied, since they don't take much time or effort to verify for
correctness. A 5 line patch can be applied by a maintainer with
barely a second glance. However, a 500 line patch may take hours to
review for correctness (the time it takes is exponentially
proportional to the size of the patch, or something).
Small patches also make it very easy to debug when something goes
wrong. It's much easier to back out patches one by one than it is
to dissect a very large patch after it's been applied (and broken
something).
2) It's important not only to send small patches, but also to rewrite
and simplify (or simply re-order) patches before submitting them.
Here is an analogy from kernel developer Al Viro:
"Think of a teacher grading homework from a math student. The
teacher does not want to see the student's trials and errors
before they came up with the solution. They want to see the
cleanest, most elegant answer. A good student knows this, and
would never submit her intermediate work before the final
solution."
The same is true of kernel development. The maintainers and
reviewers do not want to see the thought process behind the
solution to the problem one is solving. They want to see a
simple and elegant solution."
It may be challenging to keep the balance between presenting an elegant
solution and working together with the community and discussing your
unfinished work. Therefore it is good to get early in the process to
get feedback to improve your work, but also keep your changes in small
chunks that they may get already accepted, even when your whole task is
not ready for inclusion now.
Also realize that it is not acceptable to send patches for inclusion
that are unfinished and will be "fixed up later."
Justify your change
-------------------
Along with breaking up your patches, it is very important for you to let
the Linux community know why they should add this change. New features
must be justified as being needed and useful.
Document your change
--------------------
When sending in your patches, pay special attention to what you say in
the text in your email. This information will become the ChangeLog
information for the patch, and will be preserved for everyone to see for
all time. It should describe the patch completely, containing:
- why the change is necessary
- the overall design approach in the patch
- implementation details
- testing results
For more details on what this should all look like, please see the
ChangeLog section of the document:
"The Perfect Patch"
http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt
All of these things are sometimes very hard to do. It can take years to
perfect these practices (if at all). It's a continuous process of
improvement that requires a lot of patience and determination. But
don't give up, it's possible. Many have done it before, and each had to
start exactly where you are now.
----------
Thanks to Paolo Ciarrocchi who allowed the "Development Process" section
to be based on text he had written, and to Randy Dunlap and Gerrit
Huizenga for some of the list of things you should and should not say.
Also thanks to Pat Mochel, Hanna Linder, Randy Dunlap, Kay Sievers,
Vojtech Pavlik, Jan Kara, Josh Boyer, Kees Cook, Andrew Morton, Andi
Kleen, Vadim Lobanov, Jesper Juhl, Adrian Bunk, Keri Harris, Frans Pop,
David A. Wheeler, Junio Hamano, Michael Kerrisk, and Alex Shepard for
their review, comments, and contributions. Without their help, this
document would not have been possible.
Maintainer: Greg Kroah-Hartman <greg@kroah.com>

16
MAINTAINERS
View File

@ -58,6 +58,7 @@ P: Person
M: Mail patches to
L: Mailing list that is relevant to this area
W: Web-page with status/info
T: SCM tree type and URL. Type is one of: git, hg, quilt.
S: Status, one of the following:
Supported: Someone is actually paid to look after this.
@ -183,6 +184,7 @@ P: Len Brown
M: len.brown@intel.com
L: acpi-devel@lists.sourceforge.net
W: http://acpi.sourceforge.net/
T: git kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
S: Maintained
AD1816 SOUND DRIVER
@ -418,6 +420,7 @@ BLOCK LAYER
P: Jens Axboe
M: axboe@suse.de
L: linux-kernel@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git
S: Maintained
BLUETOOTH SUBSYSTEM
@ -803,12 +806,14 @@ DRIVER CORE, KOBJECTS, AND SYSFS
P: Greg Kroah-Hartman
M: gregkh@suse.de
L: linux-kernel@vger.kernel.org
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
S: Supported
DRM DRIVERS
P: David Airlie
M: airlied@linux.ie
L: dri-devel@lists.sourceforge.net
T: git kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6.git
S: Maintained
DSCC4 DRIVER
@ -1113,6 +1118,7 @@ P: Jean Delvare
M: khali@linux-fr.org
L: lm-sensors@lm-sensors.org
W: http://www.lm-sensors.nu/
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
S: Maintained
I2O
@ -1145,6 +1151,7 @@ P: Tony Luck
M: tony.luck@intel.com
L: linux-ia64@vger.kernel.org
W: http://www.ia64-linux.org/
T: git kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git
S: Maintained
SN-IA64 (Itanium) SUB-PLATFORM
@ -1212,6 +1219,7 @@ P: Jody McIntyre
M: scjody@steamballoon.com
L: linux1394-devel@lists.sourceforge.net
W: http://www.linux1394.org/
T: git kernel.org:/pub/scm/linux/kernel/git/scjody/ieee1394.git
S: Maintained
IEEE 1394 OHCI DRIVER
@ -1263,6 +1271,7 @@ P: Hal Rosenstock
M: halr@voltaire.com
L: openib-general@openib.org
W: http://www.openib.org/
T: git kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git
S: Supported
INPUT (KEYBOARD, MOUSE, JOYSTICK) DRIVERS
@ -1436,6 +1445,7 @@ P: Kai Germaschewski
M: kai@germaschewski.name
P: Sam Ravnborg
M: sam@ravnborg.org
T: git kernel.org:/pub/scm/linux/kernel/git/sam/kbuild.git
S: Maintained
KERNEL JANITORS
@ -1782,6 +1792,7 @@ M: akpm@osdl.org
P: Jeff Garzik
M: jgarzik@pobox.com
L: netdev@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git
S: Maintained
NETWORKING [GENERAL]
@ -1959,6 +1970,7 @@ P: Greg Kroah-Hartman
M: gregkh@suse.de
L: linux-kernel@vger.kernel.org
L: linux-pci@atrey.karlin.mff.cuni.cz
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
S: Supported
PCI HOTPLUG CORE
@ -1980,6 +1992,7 @@ S: Maintained
PCMCIA SUBSYSTEM
P: Linux PCMCIA Team
L: http://lists.infradead.org/mailman/listinfo/linux-pcmcia
T: git kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
S: Maintained
PCNET32 NETWORK DRIVER
@ -2189,6 +2202,7 @@ SCSI SUBSYSTEM
P: James E.J. Bottomley
M: James.Bottomley@SteelEye.com
L: linux-scsi@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
S: Maintained
SCSI TAPE DRIVER
@ -2228,6 +2242,7 @@ SERIAL ATA (SATA) SUBSYSTEM:
P: Jeff Garzik
M: jgarzik@pobox.com
L: linux-ide@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
S: Supported
SGI SN-IA64 (Altix) SERIAL CONSOLE DRIVER
@ -2749,6 +2764,7 @@ M: gregkh@suse.de
L: linux-usb-users@lists.sourceforge.net
L: linux-usb-devel@lists.sourceforge.net
W: http://www.linux-usb.org
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
S: Supported
USB UHCI DRIVER

133
arch/ia64/kernel/ivt.S
View File

@ -91,16 +91,17 @@ ENTRY(vhpt_miss)
* (the "original") TLB miss, which may either be caused by an instruction
* fetch or a data access (or non-access).
*
* What we do here is normal TLB miss handing for the _original_ miss, followed
* by inserting the TLB entry for the virtual page table page that the VHPT
* walker was attempting to access. The latter gets inserted as long
* as both L1 and L2 have valid mappings for the faulting address.
* The TLB entry for the original miss gets inserted only if
* the L3 entry indicates that the page is present.
* What we do here is normal TLB miss handing for the _original_ miss,
* followed by inserting the TLB entry for the virtual page table page
* that the VHPT walker was attempting to access. The latter gets
* inserted as long as page table entry above pte level have valid
* mappings for the faulting address. The TLB entry for the original
* miss gets inserted only if the pte entry indicates that the page is
* present.
*
* do_page_fault gets invoked in the following cases:
* - the faulting virtual address uses unimplemented address bits
* - the faulting virtual address has no L1, L2, or L3 mapping
* - the faulting virtual address has no valid page table mapping
*/
mov r16=cr.ifa // get address that caused the TLB miss
#ifdef CONFIG_HUGETLB_PAGE
@ -126,7 +127,7 @@ ENTRY(vhpt_miss)
#endif
;;
cmp.eq p6,p7=5,r17 // is IFA pointing into to region 5?
shr.u r18=r22,PGDIR_SHIFT // get bits 33-63 of the faulting address
shr.u r18=r22,PGDIR_SHIFT // get bottom portion of pgd index bit
;;
(p7) dep r17=r17,r19,(PAGE_SHIFT-3),3 // put region number bits in place
@ -137,38 +138,38 @@ ENTRY(vhpt_miss)
(p6) shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT
(p7) shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT-3
;;
(p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=PTA + IFA(33,42)*8
(p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=PTA + (((IFA(61,63) << 7) | IFA(33,39))*8)
(p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=pgd_offset for region 5
(p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=pgd_offset for region[0-4]
cmp.eq p7,p6=0,r21 // unused address bits all zeroes?
#ifdef CONFIG_PGTABLE_4
shr.u r28=r22,PUD_SHIFT // shift L2 index into position
shr.u r28=r22,PUD_SHIFT // shift pud index into position
#else
shr.u r18=r22,PMD_SHIFT // shift L3 index into position
shr.u r18=r22,PMD_SHIFT // shift pmd index into position
#endif
;;
ld8 r17=[r17] // fetch the L1 entry (may be 0)
ld8 r17=[r17] // get *pgd (may be 0)
;;
(p7) cmp.eq p6,p7=r17,r0 // was L1 entry NULL?
(p7) cmp.eq p6,p7=r17,r0 // was pgd_present(*pgd) == NULL?
#ifdef CONFIG_PGTABLE_4
dep r28=r28,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry
dep r28=r28,r17,3,(PAGE_SHIFT-3) // r28=pud_offset(pgd,addr)
;;
shr.u r18=r22,PMD_SHIFT // shift L3 index into position
(p7) ld8 r29=[r28] // fetch the L2 entry (may be 0)
shr.u r18=r22,PMD_SHIFT // shift pmd index into position
(p7) ld8 r29=[r28] // get *pud (may be 0)
;;
(p7) cmp.eq.or.andcm p6,p7=r29,r0 // was L2 entry NULL?
dep r17=r18,r29,3,(PAGE_SHIFT-3) // compute address of L3 page table entry
(p7) cmp.eq.or.andcm p6,p7=r29,r0 // was pud_present(*pud) == NULL?
dep r17=r18,r29,3,(PAGE_SHIFT-3) // r17=pmd_offset(pud,addr)
#else
dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L3 page table entry
dep r17=r18,r17,3,(PAGE_SHIFT-3) // r17=pmd_offset(pgd,addr)
#endif
;;
(p7) ld8 r20=[r17] // fetch the L3 entry (may be 0)
shr.u r19=r22,PAGE_SHIFT // shift L4 index into position
(p7) ld8 r20=[r17] // get *pmd (may be 0)
shr.u r19=r22,PAGE_SHIFT // shift pte index into position
;;
(p7) cmp.eq.or.andcm p6,p7=r20,r0 // was L3 entry NULL?
dep r21=r19,r20,3,(PAGE_SHIFT-3) // compute address of L4 page table entry
(p7) cmp.eq.or.andcm p6,p7=r20,r0 // was pmd_present(*pmd) == NULL?
dep r21=r19,r20,3,(PAGE_SHIFT-3) // r21=pte_offset(pmd,addr)
;;
(p7) ld8 r18=[r21] // read the L4 PTE
mov r19=cr.isr // cr.isr bit 0 tells us if this is an insn miss
(p7) ld8 r18=[r21] // read *pte
mov r19=cr.isr // cr.isr bit 32 tells us if this is an insn miss
;;
(p7) tbit.z p6,p7=r18,_PAGE_P_BIT // page present bit cleared?
mov r22=cr.iha // get the VHPT address that caused the TLB miss
@ -202,25 +203,33 @@ ENTRY(vhpt_miss)
dv_serialize_data
/*
* Re-check L2 and L3 pagetable. If they changed, we may have received a ptc.g
* Re-check pagetable entry. If they changed, we may have received a ptc.g
* between reading the pagetable and the "itc". If so, flush the entry we
* inserted and retry.
* inserted and retry. At this point, we have:
*
* r28 = equivalent of pud_offset(pgd, ifa)
* r17 = equivalent of pmd_offset(pud, ifa)
* r21 = equivalent of pte_offset(pmd, ifa)
*
* r29 = *pud
* r20 = *pmd
* r18 = *pte
*/
ld8 r25=[r21] // read L4 entry again
ld8 r26=[r17] // read L3 PTE again
ld8 r25=[r21] // read *pte again
ld8 r26=[r17] // read *pmd again
#ifdef CONFIG_PGTABLE_4
ld8 r18=[r28] // read L2 entry again
ld8 r19=[r28] // read *pud again
#endif
cmp.ne p6,p7=r0,r0
;;
cmp.ne.or.andcm p6,p7=r26,r20 // did L3 entry change
cmp.ne.or.andcm p6,p7=r26,r20 // did *pmd change
#ifdef CONFIG_PGTABLE_4
cmp.ne.or.andcm p6,p7=r29,r18 // did L4 PTE change
cmp.ne.or.andcm p6,p7=r19,r29 // did *pud change
#endif
mov r27=PAGE_SHIFT<<2
;;
(p6) ptc.l r22,r27 // purge PTE page translation
(p7) cmp.ne.or.andcm p6,p7=r25,r18 // did L4 PTE change
(p7) cmp.ne.or.andcm p6,p7=r25,r18 // did *pte change
;;
(p6) ptc.l r16,r27 // purge translation
#endif
@ -235,19 +244,19 @@ END(vhpt_miss)
ENTRY(itlb_miss)
DBG_FAULT(1)
/*
* The ITLB handler accesses the L3 PTE via the virtually mapped linear
* The ITLB handler accesses the PTE via the virtually mapped linear
* page table. If a nested TLB miss occurs, we switch into physical
* mode, walk the page table, and then re-execute the L3 PTE read
* and go on normally after that.
* mode, walk the page table, and then re-execute the PTE read and
* go on normally after that.
*/
mov r16=cr.ifa // get virtual address
mov r29=b0 // save b0
mov r31=pr // save predicates
.itlb_fault:
mov r17=cr.iha // get virtual address of L3 PTE
mov r17=cr.iha // get virtual address of PTE
movl r30=1f // load nested fault continuation point
;;
1: ld8 r18=[r17] // read L3 PTE
1: ld8 r18=[r17] // read *pte
;;
mov b0=r29
tbit.z p6,p0=r18,_PAGE_P_BIT // page present bit cleared?
@ -262,7 +271,7 @@ ENTRY(itlb_miss)
*/
dv_serialize_data
ld8 r19=[r17] // read L3 PTE again and see if same
ld8 r19=[r17] // read *pte again and see if same
mov r20=PAGE_SHIFT<<2 // setup page size for purge
;;
cmp.ne p7,p0=r18,r19
@ -279,19 +288,19 @@ END(itlb_miss)
ENTRY(dtlb_miss)
DBG_FAULT(2)
/*
* The DTLB handler accesses the L3 PTE via the virtually mapped linear
* The DTLB handler accesses the PTE via the virtually mapped linear
* page table. If a nested TLB miss occurs, we switch into physical
* mode, walk the page table, and then re-execute the L3 PTE read
* and go on normally after that.
* mode, walk the page table, and then re-execute the PTE read and
* go on normally after that.
*/
mov r16=cr.ifa // get virtual address
mov r29=b0 // save b0
mov r31=pr // save predicates
dtlb_fault:
mov r17=cr.iha // get virtual address of L3 PTE
mov r17=cr.iha // get virtual address of PTE
movl r30=1f // load nested fault continuation point
;;
1: ld8 r18=[r17] // read L3 PTE
1: ld8 r18=[r17] // read *pte
;;
mov b0=r29
tbit.z p6,p0=r18,_PAGE_P_BIT // page present bit cleared?
@ -306,7 +315,7 @@ dtlb_fault:
*/
dv_serialize_data
ld8 r19=[r17] // read L3 PTE again and see if same
ld8 r19=[r17] // read *pte again and see if same
mov r20=PAGE_SHIFT<<2 // setup page size for purge
;;
cmp.ne p7,p0=r18,r19
@ -420,7 +429,7 @@ ENTRY(nested_dtlb_miss)
* r30: continuation address
* r31: saved pr
*
* Output: r17: physical address of L3 PTE of faulting address
* Output: r17: physical address of PTE of faulting address
* r29: saved b0
* r30: continuation address
* r31: saved pr
@ -450,33 +459,33 @@ ENTRY(nested_dtlb_miss)
(p6) shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT
(p7) shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT-3
;;
(p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=PTA + IFA(33,42)*8
(p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=PTA + (((IFA(61,63) << 7) | IFA(33,39))*8)
(p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=pgd_offset for region 5
(p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=pgd_offset for region[0-4]
cmp.eq p7,p6=0,r21 // unused address bits all zeroes?
#ifdef CONFIG_PGTABLE_4
shr.u r18=r22,PUD_SHIFT // shift L2 index into position
shr.u r18=r22,PUD_SHIFT // shift pud index into position
#else
shr.u r18=r22,PMD_SHIFT // shift L3 index into position
shr.u r18=r22,PMD_SHIFT // shift pmd index into position
#endif
;;
ld8 r17=[r17] // fetch the L1 entry (may be 0)
ld8 r17=[r17] // get *pgd (may be 0)
;;
(p7) cmp.eq p6,p7=r17,r0 // was L1 entry NULL?
dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry
(p7) cmp.eq p6,p7=r17,r0 // was pgd_present(*pgd) == NULL?
dep r17=r18,r17,3,(PAGE_SHIFT-3) // r17=p[u|m]d_offset(pgd,addr)
;;
#ifdef CONFIG_PGTABLE_4
(p7) ld8 r17=[r17] // fetch the L2 entry (may be 0)
shr.u r18=r22,PMD_SHIFT // shift L3 index into position
(p7) ld8 r17=[r17] // get *pud (may be 0)
shr.u r18=r22,PMD_SHIFT // shift pmd index into position
;;
(p7) cmp.eq.or.andcm p6,p7=r17,r0 // was L2 entry NULL?
dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry
(p7) cmp.eq.or.andcm p6,p7=r17,r0 // was pud_present(*pud) == NULL?
dep r17=r18,r17,3,(PAGE_SHIFT-3) // r17=pmd_offset(pud,addr)
;;
#endif
(p7) ld8 r17=[r17] // fetch the L3 entry (may be 0)
shr.u r19=r22,PAGE_SHIFT // shift L4 index into position
(p7) ld8 r17=[r17] // get *pmd (may be 0)
shr.u r19=r22,PAGE_SHIFT // shift pte index into position
;;
(p7) cmp.eq.or.andcm p6,p7=r17,r0 // was L3 entry NULL?
dep r17=r19,r17,3,(PAGE_SHIFT-3) // compute address of L4 page table entry
(p7) cmp.eq.or.andcm p6,p7=r17,r0 // was pmd_present(*pmd) == NULL?
dep r17=r19,r17,3,(PAGE_SHIFT-3) // r17=pte_offset(pmd,addr);
(p6) br.cond.spnt page_fault
mov b0=r30
br.sptk.many b0 // return to continuation point

13
arch/powerpc/Kconfig
View File

@ -598,19 +598,6 @@ config ARCH_MEMORY_PROBE
def_bool y
depends on MEMORY_HOTPLUG
# Some NUMA nodes have memory ranges that span
# other nodes. Even though a pfn is valid and
# between a node's start and end pfns, it may not
# reside on that node.
#
# This is a relatively temporary hack that should
# be able to go away when sparsemem is fully in
# place
config NODES_SPAN_OTHER_NODES
def_bool y
depends on NEED_MULTIPLE_NODES
config PPC_64K_PAGES
bool "64k page size"
depends on PPC64

9
arch/powerpc/Makefile
View File

@ -33,6 +33,8 @@ endif
export CROSS32CC CROSS32AS CROSS32LD CROSS32OBJCOPY
KBUILD_DEFCONFIG := $(shell uname -m)_defconfig
ifeq ($(CONFIG_PPC64),y)
OLDARCH := ppc64
SZ := 64
@ -111,9 +113,6 @@ cpu-as-$(CONFIG_E200) += -Wa,-me200
AFLAGS += $(cpu-as-y)
CFLAGS += $(cpu-as-y)
# Default to the common case.
KBUILD_DEFCONFIG := common_defconfig
head-y := arch/powerpc/kernel/head_32.o
head-$(CONFIG_PPC64) := arch/powerpc/kernel/head_64.o
head-$(CONFIG_8xx) := arch/powerpc/kernel/head_8xx.o
@ -125,11 +124,11 @@ head-$(CONFIG_PPC64) += arch/powerpc/kernel/entry_64.o
head-$(CONFIG_PPC_FPU) += arch/powerpc/kernel/fpu.o
core-y += arch/powerpc/kernel/ \
arch/$(OLDARCH)/kernel/ \
arch/powerpc/mm/ \
arch/powerpc/lib/ \
arch/powerpc/sysdev/ \
arch/powerpc/platforms/
core-$(CONFIG_PPC32) += arch/ppc/kernel/
core-$(CONFIG_MATH_EMULATION) += arch/ppc/math-emu/
core-$(CONFIG_XMON) += arch/powerpc/xmon/
core-$(CONFIG_APUS) += arch/ppc/amiga/
@ -165,7 +164,7 @@ define archhelp
@echo ' (your) ~/bin/installkernel or'
@echo ' (distribution) /sbin/installkernel or'
@echo ' install to $$(INSTALL_PATH) and run lilo'
@echo ' *_defconfig - Select default config from arch/$(ARCH)/ppc/configs'
@echo ' *_defconfig - Select default config from arch/$(ARCH)/configs'
endef
archclean:

23
arch/powerpc/boot/crt0.S
View File

@ -14,43 +14,42 @@
.text
.globl _zimage_start
_zimage_start:
bl reloc_offset
bl 1f
reloc_offset:
1:
mflr r0
lis r9,reloc_offset@ha
addi r9,r9,reloc_offset@l
lis r9,1b@ha
addi r9,r9,1b@l
subf. r0,r9,r0
beq clear_caches
beq 3f
reloc_got2:
lis r9,__got2_start@ha
addi r9,r9,__got2_start@l
lis r8,__got2_end@ha
addi r8,r8,__got2_end@l
subf. r8,r9,r8
beq clear_caches
beq 3f
srwi. r8,r8,2
mtctr r8
add r9,r0,r9
reloc_got2_loop:
2:
lwz r8,0(r9)
add r8,r8,r0
stw r8,0(r9)
addi r9,r9,4
bdnz reloc_got2_loop
bdnz 2b
clear_caches:
3:
lis r9,_start@h
add r9,r0,r9
lis r8,_etext@ha
addi r8,r8,_etext@l
add r8,r0,r8
1: dcbf r0,r9
4: dcbf r0,r9
icbi r0,r9
addi r9,r9,0x20
cmplwi 0,r9,8
blt 1b
blt 4b
sync
isync

348
arch/ppc64/defconfig → arch/powerpc/configs/ppc64_defconfig
View File

@ -1,18 +1,33 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.14-rc4
# Thu Oct 20 08:28:33 2005
# Linux kernel version: 2.6.15-rc1
# Fri Nov 18 16:23:24 2005
#
CONFIG_PPC64=y
CONFIG_64BIT=y
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_FORCE_MAX_ZONEORDER=13
#
# Processor support
#
# CONFIG_POWER4_ONLY is not set
CONFIG_POWER3=y
CONFIG_POWER4=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_SMP=y
CONFIG_NR_CPUS=32
#
# Code maturity level options
@ -41,7 +56,7 @@ CONFIG_CPUSETS=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
@ -67,78 +82,115 @@ CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_SYSVIPC_COMPAT=y
#
# Block layer
#
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Platform support
#
# CONFIG_PPC_ISERIES is not set
CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_PPC_ISERIES is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_APUS is not set
CONFIG_PPC_PSERIES=y
CONFIG_PPC_BPA=y
CONFIG_PPC_PMAC=y
CONFIG_PPC_PMAC64=y
CONFIG_PPC_MAPLE=y
CONFIG_PPC=y
CONFIG_PPC64=y
# CONFIG_PPC_CELL is not set
CONFIG_PPC_OF=y
CONFIG_XICS=y
CONFIG_MPIC=y
CONFIG_BPA_IIC=y
CONFIG_ALTIVEC=y
CONFIG_PPC_SPLPAR=y
CONFIG_KEXEC=y
CONFIG_IBMVIO=y
CONFIG_U3_DART=y
CONFIG_MPIC=y
CONFIG_PPC_RTAS=y
CONFIG_RTAS_ERROR_LOGGING=y
CONFIG_RTAS_PROC=y
CONFIG_RTAS_FLASH=m
# CONFIG_MMIO_NVRAM is not set
CONFIG_MPIC_BROKEN_U3=y
CONFIG_PPC_PMAC64=y
CONFIG_BOOTX_TEXT=y
# CONFIG_POWER4_ONLY is not set
CONFIG_IOMMU_VMERGE=y
CONFIG_SMP=y
CONFIG_NR_CPUS=32
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_DISCONTIGMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA is not set
# CONFIG_SCHED_SMT is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_PREEMPT_BKL is not set
CONFIG_IBMVIO=y
# CONFIG_PPC_MPC106 is not set
CONFIG_GENERIC_TBSYNC=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_PMAC64=y
# CONFIG_WANT_EARLY_SERIAL is not set
#
# Kernel options
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_EEH=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_PPC_RTAS=y
CONFIG_RTAS_PROC=y
CONFIG_RTAS_FLASH=m
CONFIG_SCANLOG=m
CONFIG_LPARCFG=y
CONFIG_SECCOMP=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_PREEMPT_BKL is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_IOMMU_VMERGE=y
CONFIG_HOTPLUG_CPU=y
CONFIG_KEXEC=y
CONFIG_IRQ_ALL_CPUS=y
CONFIG_PPC_SPLPAR=y
CONFIG_EEH=y
CONFIG_SCANLOG=m
CONFIG_LPARCFG=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
# Bus Options
# Bus options
#
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_I8259=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_LEGACY_PROC is not set
@ -158,6 +210,7 @@ CONFIG_HOTPLUG_PCI=m
# CONFIG_HOTPLUG_PCI_SHPC is not set
CONFIG_HOTPLUG_PCI_RPA=m
CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
CONFIG_KERNEL_START=0xc000000000000000
#
# Networking
@ -199,6 +252,10 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
@ -301,6 +358,10 @@ CONFIG_LLC=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
@ -338,13 +399,7 @@ CONFIG_FW_LOADER=y
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_1284 is not set
# CONFIG_PARPORT is not set
#
# Plug and Play support
@ -354,7 +409,6 @@ CONFIG_PARPORT_PC=m
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@ -370,14 +424,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
@ -407,7 +453,7 @@ CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_SL82C105=y
# CONFIG_BLK_DEV_SL82C105 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
@ -479,6 +525,7 @@ CONFIG_SCSI_ISCSI_ATTRS=m
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@ -495,10 +542,12 @@ CONFIG_SCSI_SATA_SVW=y
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
# CONFIG_SCSI_SATA_SIL24 is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
# CONFIG_SCSI_SATA_VIA is not set
@ -512,8 +561,6 @@ CONFIG_SCSI_SATA_SVW=y
CONFIG_SCSI_IBMVSCSI=y
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
@ -608,6 +655,9 @@ CONFIG_IEEE1394_AMDTP=m
CONFIG_ADB_PMU=y
CONFIG_PMAC_SMU=y
CONFIG_THERM_PM72=y
CONFIG_WINDFARM=y
CONFIG_WINDFARM_PM81=y
CONFIG_WINDFARM_PM91=y
#
# Network device support
@ -664,7 +714,6 @@ CONFIG_E100=y
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
@ -684,7 +733,6 @@ CONFIG_E1000=y
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_SPIDER_NET is not set
# CONFIG_MV643XX_ETH is not set
#
@ -714,7 +762,6 @@ CONFIG_IBMOL=y
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
@ -722,6 +769,7 @@ CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
@ -784,7 +832,6 @@ CONFIG_INPUT_PCSPKR=m
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
@ -817,10 +864,6 @@ CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
CONFIG_HVC_CONSOLE=y
CONFIG_HVCS=m
@ -834,6 +877,7 @@ CONFIG_HVCS=m
#
# CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@ -851,6 +895,7 @@ CONFIG_MAX_RAW_DEVS=256
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
@ -879,7 +924,6 @@ CONFIG_I2C_AMD8111=y
CONFIG_I2C_KEYWEST=y
CONFIG_I2C_PMAC_SMU=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
@ -904,6 +948,7 @@ CONFIG_I2C_PMAC_SMU=y
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@ -945,7 +990,6 @@ CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SOFT_CURSOR=y
CONFIG_FB_MACMODES=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
@ -960,6 +1004,7 @@ CONFIG_FB_OF=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_MATROX=y
@ -983,7 +1028,6 @@ CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
@ -992,6 +1036,7 @@ CONFIG_FB_RADEON_I2C=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
@ -1012,7 +1057,94 @@ CONFIG_LCD_DEVICE=y
#
# Sound
#
# CONFIG_SOUND is not set
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_GENERIC_DRIVER=y
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set
#
# ALSA PowerMac devices
#
CONFIG_SND_POWERMAC=m
CONFIG_SND_POWERMAC_AUTO_DRC=y
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
@ -1046,12 +1178,16 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
#
# USB Device Class drivers
#
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
@ -1106,7 +1242,7 @@ CONFIG_USB_HIDDEV=y
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
CONFIG_USB_PEGASUS=y
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set
@ -1114,7 +1250,6 @@ CONFIG_USB_PEGASUS=y
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
@ -1163,6 +1298,7 @@ CONFIG_INFINIBAND_MTHCA=m
# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
# CONFIG_INFINIBAND_SRP is not set
#
# SN Devices
@ -1358,10 +1494,25 @@ CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
#
# Profiling support
# Library routines
#
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
#
# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
# CONFIG_KPROBES is not set
#
# Kernel hacking
@ -1378,14 +1529,15 @@ CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_KPROBES is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUGGER=y
CONFIG_XMON=y
# CONFIG_XMON_DEFAULT is not set
# CONFIG_PPCDBG is not set
CONFIG_IRQSTACKS=y
CONFIG_BOOTX_TEXT=y
#
# Security options
@ -1425,17 +1577,3 @@ CONFIG_CRYPTO_TEST=m
#
# Hardware crypto devices
#
#
# Library routines
#
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m

1
arch/powerpc/configs/pseries_defconfig
View File

@ -165,7 +165,6 @@ CONFIG_SPARSEMEM_EXTREME=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_PPC_64K_PAGES is not set
CONFIG_SCHED_SMT=y
CONFIG_PROC_DEVICETREE=y

7
arch/powerpc/kernel/Makefile
View File

@ -12,12 +12,12 @@ CFLAGS_btext.o += -fPIC
endif
obj-y := semaphore.o cputable.o ptrace.o syscalls.o \
irq.o signal_32.o pmc.o vdso.o
irq.o align.o signal_32.o pmc.o vdso.o
obj-y += vdso32/
obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \
signal_64.o ptrace32.o systbl.o \
paca.o ioctl32.o cpu_setup_power4.o \
firmware.o sysfs.o udbg.o
firmware.o sysfs.o udbg.o idle_64.o
obj-$(CONFIG_PPC64) += vdso64/
obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o
obj-$(CONFIG_POWER4) += idle_power4.o
@ -35,6 +35,7 @@ obj-$(CONFIG_PPC_PSERIES) += udbg_16550.o
obj-$(CONFIG_PPC_MAPLE) += udbg_16550.o
udbgscc-$(CONFIG_PPC64) := udbg_scc.o
obj-$(CONFIG_PPC_PMAC) += $(udbgscc-y)
obj64-$(CONFIG_PPC_MULTIPLATFORM) += nvram_64.o
ifeq ($(CONFIG_PPC_MERGE),y)
@ -78,5 +79,7 @@ smpobj-$(CONFIG_SMP) += smp.o
endif
obj-$(CONFIG_PPC64) += $(obj64-y)
extra-$(CONFIG_PPC_FPU) += fpu.o
extra-$(CONFIG_PPC64) += entry_64.o

382
arch/ppc64/kernel/align.c → arch/powerpc/kernel/align.c
View File

@ -7,6 +7,9 @@
* PowerPC 403GCX/405GP modifications.
* Copyright (c) 2001-2002 PPC64 team, IBM Corp
* 64-bit and Power4 support
* Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp
* <benh@kernel.crashing.org>
* Merge ppc32 and ppc64 implementations
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@ -38,10 +41,15 @@ struct aligninfo {
#define F 8 /* to/from fp regs */
#define U 0x10 /* update index register */
#define M 0x20 /* multiple load/store */
#define SW 0x40 /* byte swap */
#define SW 0x40 /* byte swap int or ... */
#define S 0x40 /* ... single-precision fp */
#define SX 0x40 /* byte count in XER */
#define HARD 0x80 /* string, stwcx. */
#define DCBZ 0x5f /* 8xx/82xx dcbz faults when cache not enabled */
#define SWAP(a, b) (t = (a), (a) = (b), (b) = t)
/*
* The PowerPC stores certain bits of the instruction that caused the
* alignment exception in the DSISR register. This array maps those
@ -57,14 +65,14 @@ static struct aligninfo aligninfo[128] = {
{ 2, LD+SE }, /* 00 0 0101: lha */
{ 2, ST }, /* 00 0 0110: sth */
{ 4, LD+M }, /* 00 0 0111: lmw */
{ 4, LD+F }, /* 00 0 1000: lfs */
{ 4, LD+F+S }, /* 00 0 1000: lfs */
{ 8, LD+F }, /* 00 0 1001: lfd */
{ 4, ST+F }, /* 00 0 1010: stfs */
{ 4, ST+F+S }, /* 00 0 1010: stfs */
{ 8, ST+F }, /* 00 0 1011: stfd */
INVALID, /* 00 0 1100 */
{ 8, LD }, /* 00 0 1101: ld */
{ 8, LD }, /* 00 0 1101: ld/ldu/lwa */
INVALID, /* 00 0 1110 */
{ 8, ST }, /* 00 0 1111: std */
{ 8, ST }, /* 00 0 1111: std/stdu */
{ 4, LD+U }, /* 00 1 0000: lwzu */
INVALID, /* 00 1 0001 */
{ 4, ST+U }, /* 00 1 0010: stwu */
@ -73,9 +81,9 @@ static struct aligninfo aligninfo[128] = {
{ 2, LD+SE+U }, /* 00 1 0101: lhau */
{ 2, ST+U }, /* 00 1 0110: sthu */
{ 4, ST+M }, /* 00 1 0111: stmw */
{ 4, LD+F+U }, /* 00 1 1000: lfsu */
{ 4, LD+F+S+U }, /* 00 1 1000: lfsu */
{ 8, LD+F+U }, /* 00 1 1001: lfdu */
{ 4, ST+F+U }, /* 00 1 1010: stfsu */
{ 4, ST+F+S+U }, /* 00 1 1010: stfsu */
{ 8, ST+F+U }, /* 00 1 1011: stfdu */
INVALID, /* 00 1 1100 */
INVALID, /* 00 1 1101 */
@ -89,10 +97,10 @@ static struct aligninfo aligninfo[128] = {
{ 4, LD+SE }, /* 01 0 0101: lwax */
INVALID, /* 01 0 0110 */
INVALID, /* 01 0 0111 */
{ 0, LD }, /* 01 0 1000: lswx */
{ 0, LD }, /* 01 0 1001: lswi */
{ 0, ST }, /* 01 0 1010: stswx */
{ 0, ST }, /* 01 0 1011: stswi */
{ 4, LD+M+HARD+SX }, /* 01 0 1000: lswx */
{ 4, LD+M+HARD }, /* 01 0 1001: lswi */
{ 4, ST+M+HARD+SX }, /* 01 0 1010: stswx */
{ 4, ST+M+HARD }, /* 01 0 1011: stswi */
INVALID, /* 01 0 1100 */
{ 8, LD+U }, /* 01 0 1101: ldu */
INVALID, /* 01 0 1110 */
@ -115,7 +123,7 @@ static struct aligninfo aligninfo[128] = {
INVALID, /* 01 1 1111 */
INVALID, /* 10 0 0000 */
INVALID, /* 10 0 0001 */
{ 0, ST }, /* 10 0 0010: stwcx. */
INVALID, /* 10 0 0010: stwcx. */
INVALID, /* 10 0 0011 */
INVALID, /* 10 0 0100 */
INVALID, /* 10 0 0101 */
@ -144,7 +152,7 @@ static struct aligninfo aligninfo[128] = {
INVALID, /* 10 1 1100 */
INVALID, /* 10 1 1101 */
INVALID, /* 10 1 1110 */
{ L1_CACHE_BYTES, ST }, /* 10 1 1111: dcbz */
{ 0, ST+HARD }, /* 10 1 1111: dcbz */
{ 4, LD }, /* 11 0 0000: lwzx */
INVALID, /* 11 0 0001 */
{ 4, ST }, /* 11 0 0010: stwx */
@ -153,9 +161,9 @@ static struct aligninfo aligninfo[128] = {
{ 2, LD+SE }, /* 11 0 0101: lhax */
{ 2, ST }, /* 11 0 0110: sthx */
INVALID, /* 11 0 0111 */
{ 4, LD+F }, /* 11 0 1000: lfsx */
{ 4, LD+F+S }, /* 11 0 1000: lfsx */
{ 8, LD+F }, /* 11 0 1001: lfdx */
{ 4, ST+F }, /* 11 0 1010: stfsx */
{ 4, ST+F+S }, /* 11 0 1010: stfsx */
{ 8, ST+F }, /* 11 0 1011: stfdx */
INVALID, /* 11 0 1100 */
{ 8, LD+M }, /* 11 0 1101: lmd */
@ -169,9 +177,9 @@ static struct aligninfo aligninfo[128] = {
{ 2, LD+SE+U }, /* 11 1 0101: lhaux */
{ 2, ST+U }, /* 11 1 0110: sthux */
INVALID, /* 11 1 0111 */
{ 4, LD+F+U }, /* 11 1 1000: lfsux */
{ 4, LD+F+S+U }, /* 11 1 1000: lfsux */
{ 8, LD+F+U }, /* 11 1 1001: lfdux */
{ 4, ST+F+U }, /* 11 1 1010: stfsux */
{ 4, ST+F+S+U }, /* 11 1 1010: stfsux */
{ 8, ST+F+U }, /* 11 1 1011: stfdux */
INVALID, /* 11 1 1100 */
INVALID, /* 11 1 1101 */
@ -179,45 +187,175 @@ static struct aligninfo aligninfo[128] = {
INVALID, /* 11 1 1111 */
};
#define SWAP(a, b) (t = (a), (a) = (b), (b) = t)
/*
* Create a DSISR value from the instruction
*/
static inline unsigned make_dsisr(unsigned instr)
{
unsigned dsisr;
/* create a DSISR value from the instruction */
dsisr = (instr & 0x03ff0000) >> 16; /* bits 6:15 --> 22:31 */
if ( IS_XFORM(instr) ) {
dsisr |= (instr & 0x00000006) << 14; /* bits 29:30 --> 15:16 */
dsisr |= (instr & 0x00000040) << 8; /* bit 25 --> 17 */
dsisr |= (instr & 0x00000780) << 3; /* bits 21:24 --> 18:21 */
}
else {
dsisr |= (instr & 0x04000000) >> 12; /* bit 5 --> 17 */
dsisr |= (instr & 0x78000000) >> 17; /* bits 1: 4 --> 18:21 */
if ( IS_DSFORM(instr) ) {
dsisr |= (instr & 0x00000003) << 18; /* bits 30:31 --> 12:13 */
}
/* bits 6:15 --> 22:31 */
dsisr = (instr & 0x03ff0000) >> 16;
if (IS_XFORM(instr)) {
/* bits 29:30 --> 15:16 */
dsisr |= (instr & 0x00000006) << 14;
/* bit 25 --> 17 */
dsisr |= (instr & 0x00000040) << 8;
/* bits 21:24 --> 18:21 */
dsisr |= (instr & 0x00000780) << 3;
} else {
/* bit 5 --> 17 */
dsisr |= (instr & 0x04000000) >> 12;
/* bits 1: 4 --> 18:21 */
dsisr |= (instr & 0x78000000) >> 17;
/* bits 30:31 --> 12:13 */
if (IS_DSFORM(instr))
dsisr |= (instr & 0x00000003) << 18;
}
return dsisr;
}
int
fix_alignment(struct pt_regs *regs)
/*
* The dcbz (data cache block zero) instruction
* gives an alignment fault if used on non-cacheable
* memory. We handle the fault mainly for the
* case when we are running with the cache disabled
* for debugging.
*/
static int emulate_dcbz(struct pt_regs *regs, unsigned char __user *addr)
{
long __user *p;
int i, size;
#ifdef __powerpc64__
size = ppc64_caches.dline_size;
#else
size = L1_CACHE_BYTES;
#endif
p = (long __user *) (regs->dar & -size);
if (user_mode(regs) && !access_ok(VERIFY_WRITE, p, size))
return -EFAULT;
for (i = 0; i < size / sizeof(long); ++i)
if (__put_user(0, p+i))
return -EFAULT;
return 1;
}
/*
* Emulate load & store multiple instructions
* On 64-bit machines, these instructions only affect/use the
* bottom 4 bytes of each register, and the loads clear the
* top 4 bytes of the affected register.
*/
#ifdef CONFIG_PPC64
#define REG_BYTE(rp, i) *((u8 *)((rp) + ((i) >> 2)) + ((i) & 3) + 4)
#else
#define REG_BYTE(rp, i) *((u8 *)(rp) + (i))
#endif
static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr,
unsigned int reg, unsigned int nb,
unsigned int flags, unsigned int instr)
{
unsigned long *rptr;
unsigned int nb0, i;
/*
* We do not try to emulate 8 bytes multiple as they aren't really
* available in our operating environments and we don't try to
* emulate multiples operations in kernel land as they should never
* be used/generated there at least not on unaligned boundaries
*/
if (unlikely((nb > 4) || !user_mode(regs)))
return 0;
/* lmw, stmw, lswi/x, stswi/x */
nb0 = 0;
if (flags & HARD) {
if (flags & SX) {
nb = regs->xer & 127;
if (nb == 0)
return 1;
} else {
if (__get_user(instr,
(unsigned int __user *)regs->nip))
return -EFAULT;
nb = (instr >> 11) & 0x1f;
if (nb == 0)
nb = 32;
}
if (nb + reg * 4 > 128) {
nb0 = nb + reg * 4 - 128;
nb = 128 - reg * 4;
}
} else {
/* lwm, stmw */
nb = (32 - reg) * 4;
}
if (!access_ok((flags & ST ? VERIFY_WRITE: VERIFY_READ), addr, nb+nb0))
return -EFAULT; /* bad address */
rptr = &regs->gpr[reg];
if (flags & LD) {
/*
* This zeroes the top 4 bytes of the affected registers
* in 64-bit mode, and also zeroes out any remaining
* bytes of the last register for lsw*.
*/
memset(rptr, 0, ((nb + 3) / 4) * sizeof(unsigned long));
if (nb0 > 0)
memset(&regs->gpr[0], 0,
((nb0 + 3) / 4) * sizeof(unsigned long));
for (i = 0; i < nb; ++i)
if (__get_user(REG_BYTE(rptr, i), addr + i))
return -EFAULT;
if (nb0 > 0) {
rptr = &regs->gpr[0];
addr += nb;
for (i = 0; i < nb0; ++i)
if (__get_user(REG_BYTE(rptr, i), addr + i))
return -EFAULT;
}
} else {
for (i = 0; i < nb; ++i)
if (__put_user(REG_BYTE(rptr, i), addr + i))
return -EFAULT;
if (nb0 > 0) {
rptr = &regs->gpr[0];
addr += nb;
for (i = 0; i < nb0; ++i)
if (__put_user(REG_BYTE(rptr, i), addr + i))
return -EFAULT;
}
}
return 1;
}
/*
* Called on alignment exception. Attempts to fixup
*
* Return 1 on success
* Return 0 if unable to handle the interrupt
* Return -EFAULT if data address is bad
*/
int fix_alignment(struct pt_regs *regs)
{
unsigned int instr, nb, flags;
int t;
unsigned long reg, areg;
unsigned long i;
int ret;
unsigned dsisr;
unsigned int reg, areg;
unsigned int dsisr;
unsigned char __user *addr;
unsigned char __user *p;
unsigned long __user *lp;
int ret, t;
union {
long ll;
u64 ll;
double dd;
unsigned char v[8];
struct {
@ -231,18 +369,22 @@ fix_alignment(struct pt_regs *regs)
} data;
/*
* Return 1 on success
* Return 0 if unable to handle the interrupt
* Return -EFAULT if data address is bad
* We require a complete register set, if not, then our assembly
* is broken
*/
CHECK_FULL_REGS(regs);
dsisr = regs->dsisr;
/* Some processors don't provide us with a DSISR we can use here,
* let's make one up from the instruction
*/
if (cpu_has_feature(CPU_FTR_NODSISRALIGN)) {
unsigned int real_instr;
if (__get_user(real_instr, (unsigned int __user *)regs->nip))
return 0;
dsisr = make_dsisr(real_instr);
unsigned int real_instr;
if (unlikely(__get_user(real_instr,
(unsigned int __user *)regs->nip)))
return -EFAULT;
dsisr = make_dsisr(real_instr);
}
/* extract the operation and registers from the dsisr */
@ -258,33 +400,37 @@ fix_alignment(struct pt_regs *regs)
/* DAR has the operand effective address */
addr = (unsigned char __user *)regs->dar;
/* A size of 0 indicates an instruction we don't support */
/* we also don't support the multiples (lmw, stmw, lmd, stmd) */
if ((nb == 0) || (flags & M))
return 0; /* too hard or invalid instruction */
/*
* Special handling for dcbz
* dcbz may give an alignment exception for accesses to caching inhibited
* storage
/* A size of 0 indicates an instruction we don't support, with
* the exception of DCBZ which is handled as a special case here
*/
if (instr == DCBZ)
addr = (unsigned char __user *) ((unsigned long)addr & -L1_CACHE_BYTES);
return emulate_dcbz(regs, addr);
if (unlikely(nb == 0))
return 0;
/* Load/Store Multiple instructions are handled in their own
* function
*/
if (flags & M)
return emulate_multiple(regs, addr, reg, nb, flags, instr);
/* Verify the address of the operand */
if (user_mode(regs)) {
if (!access_ok((flags & ST? VERIFY_WRITE: VERIFY_READ), addr, nb))
return -EFAULT; /* bad address */
}
if (unlikely(user_mode(regs) &&
!access_ok((flags & ST ? VERIFY_WRITE : VERIFY_READ),
addr, nb)))
return -EFAULT;
/* Force the fprs into the save area so we can reference them */
if (flags & F) {
if (!user_mode(regs))
/* userland only */
if (unlikely(!user_mode(regs)))
return 0;
flush_fp_to_thread(current);
}
/* If we are loading, get the data from user space */
/* If we are loading, get the data from user space, else
* get it from register values
*/
if (flags & LD) {
data.ll = 0;
ret = 0;
@ -301,75 +447,62 @@ fix_alignment(struct pt_regs *regs)
case 2:
ret |= __get_user(data.v[6], p++);
ret |= __get_user(data.v[7], p++);
if (ret)
if (unlikely(ret))
return -EFAULT;
}
}
} else if (flags & F)
data.dd = current->thread.fpr[reg];
else
data.ll = regs->gpr[reg];
/* If we are storing, get the data from the saved gpr or fpr */
if (flags & ST) {
if (flags & F) {
if (nb == 4) {
/* Doing stfs, have to convert to single */
preempt_disable();
enable_kernel_fp();
cvt_df(&current->thread.fpr[reg], (float *)&data.v[4], &current->thread);
disable_kernel_fp();
preempt_enable();
}
else
data.dd = current->thread.fpr[reg];
}
else
data.ll = regs->gpr[reg];
}
/* Swap bytes as needed */
if (flags & SW) {
if (nb == 2)
SWAP(data.v[6], data.v[7]);
else { /* nb must be 4 */
SWAP(data.v[4], data.v[7]);
SWAP(data.v[5], data.v[6]);
}
}
/* Sign extend as needed */
if (flags & SE) {
/* Perform other misc operations like sign extension, byteswap,
* or floating point single precision conversion
*/
switch (flags & ~U) {
case LD+SE: /* sign extend */
if ( nb == 2 )
data.ll = data.x16.low16;
else /* nb must be 4 */
data.ll = data.x32.low32;
}
/* If we are loading, move the data to the gpr or fpr */
if (flags & LD) {
if (flags & F) {
if (nb == 4) {
/* Doing lfs, have to convert to double */
preempt_disable();
enable_kernel_fp();
cvt_fd((float *)&data.v[4], &current->thread.fpr[reg], &current->thread);
disable_kernel_fp();
preempt_enable();
}
else
current->thread.fpr[reg] = data.dd;
break;
case LD+S: /* byte-swap */
case ST+S:
if (nb == 2) {
SWAP(data.v[6], data.v[7]);
} else {
SWAP(data.v[4], data.v[7]);
SWAP(data.v[5], data.v[6]);
}
else
regs->gpr[reg] = data.ll;
break;
/* Single-precision FP load and store require conversions... */
case LD+F+S:
#ifdef CONFIG_PPC_FPU
preempt_disable();
enable_kernel_fp();
cvt_fd((float *)&data.v[4], &data.dd, &current->thread);
preempt_enable();
#else
return 0;
#endif
break;
case ST+F+S:
#ifdef CONFIG_PPC_FPU
preempt_disable();
enable_kernel_fp();
cvt_df(&data.dd, (float *)&data.v[4], &current->thread);
preempt_enable();
#else
return 0;
#endif
break;
}
/* If we are storing, copy the data to the user */
/* Store result to memory or update registers */
if (flags & ST) {
ret = 0;
p = addr;
switch (nb) {
case 128: /* Special case - must be dcbz */
lp = (unsigned long __user *)p;
for (i = 0; i < L1_CACHE_BYTES / sizeof(long); ++i)
ret |= __put_user(0, lp++);
break;
case 8:
ret |= __put_user(data.v[0], p++);
ret |= __put_user(data.v[1], p++);
@ -382,15 +515,16 @@ fix_alignment(struct pt_regs *regs)
ret |= __put_user(data.v[6], p++);
ret |= __put_user(data.v[7], p++);
}
if (ret)
if (unlikely(ret))
return -EFAULT;
}
} else if (flags & F)
current->thread.fpr[reg] = data.dd;
else
regs->gpr[reg] = data.ll;
/* Update RA as needed */
if (flags & U) {
if (flags & U)
regs->gpr[areg] = regs->dar;
}
return 1;
}

0
arch/ppc64/kernel/idle.c → arch/powerpc/kernel/idle_64.c
View File

8
arch/powerpc/kernel/misc_32.S
View File

@ -27,14 +27,6 @@
.text
.align 5
_GLOBAL(__delay)
cmpwi 0,r3,0
mtctr r3
beqlr
1: bdnz 1b
blr
/*
* This returns the high 64 bits of the product of two 64-bit numbers.
*/

0
arch/ppc64/kernel/nvram.c → arch/powerpc/kernel/nvram_64.c
View File

6
arch/powerpc/kernel/rtas-rtc.c
View File

@ -15,7 +15,7 @@ unsigned long __init rtas_get_boot_time(void)
{
int ret[8];
int error, wait_time;
unsigned long max_wait_tb;
u64 max_wait_tb;
max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT;
do {
@ -45,7 +45,7 @@ void rtas_get_rtc_time(struct rtc_time *rtc_tm)
{
int ret[8];
int error, wait_time;
unsigned long max_wait_tb;
u64 max_wait_tb;
max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT;
do {
@ -80,7 +80,7 @@ void rtas_get_rtc_time(struct rtc_time *rtc_tm)
int rtas_set_rtc_time(struct rtc_time *tm)
{
int error, wait_time;
unsigned long max_wait_tb;
u64 max_wait_tb;
max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT;
do {

28
arch/powerpc/kernel/time.c
View File

@ -130,6 +130,34 @@ unsigned long tb_last_stamp;
*/
DEFINE_PER_CPU(unsigned long, last_jiffy);
void __delay(unsigned long loops)
{
unsigned long start;
int diff;
if (__USE_RTC()) {
start = get_rtcl();
do {
/* the RTCL register wraps at 1000000000 */
diff = get_rtcl() - start;
if (diff < 0)
diff += 1000000000;
} while (diff < loops);
} else {
start = get_tbl();
while (get_tbl() - start < loops)
HMT_low();
HMT_medium();
}
}
EXPORT_SYMBOL(__delay);
void udelay(unsigned long usecs)
{
__delay(tb_ticks_per_usec * usecs);
}
EXPORT_SYMBOL(udelay);
static __inline__ void timer_check_rtc(void)
{
/*

11
arch/powerpc/platforms/chrp/setup.c
View File

@ -257,6 +257,13 @@ void __init chrp_setup_arch(void)
if (rtas_token("display-character") >= 0)
ppc_md.progress = rtas_progress;
/* use RTAS time-of-day routines if available */
if (rtas_token("get-time-of-day") != RTAS_UNKNOWN_SERVICE) {
ppc_md.get_boot_time = rtas_get_boot_time;
ppc_md.get_rtc_time = rtas_get_rtc_time;
ppc_md.set_rtc_time = rtas_set_rtc_time;
}
#ifdef CONFIG_BOOTX_TEXT
if (ppc_md.progress == NULL && boot_text_mapped)
ppc_md.progress = btext_progress;
@ -505,9 +512,11 @@ void __init chrp_init(void)
ppc_md.halt = rtas_halt;
ppc_md.time_init = chrp_time_init;
ppc_md.calibrate_decr = chrp_calibrate_decr;
/* this may get overridden with rtas routines later... */
ppc_md.set_rtc_time = chrp_set_rtc_time;
ppc_md.get_rtc_time = chrp_get_rtc_time;
ppc_md.calibrate_decr = chrp_calibrate_decr;
#ifdef CONFIG_SMP
smp_ops = &chrp_smp_ops;

1
arch/powerpc/platforms/chrp/smp.c
View File

@ -34,6 +34,7 @@
#include <asm/machdep.h>
#include <asm/smp.h>
#include <asm/mpic.h>
#include <asm/rtas.h>
static void __devinit smp_chrp_kick_cpu(int nr)
{

3
arch/powerpc/platforms/chrp/time.c
View File

@ -87,7 +87,6 @@ int chrp_set_rtc_time(struct rtc_time *tmarg)
chrp_cmos_clock_write((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
tm.tm_year -= 1900;
if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
BIN_TO_BCD(tm.tm_sec);
BIN_TO_BCD(tm.tm_min);
@ -156,7 +155,7 @@ void chrp_get_rtc_time(struct rtc_time *tm)
BCD_TO_BIN(mon);
BCD_TO_BIN(year);
}
if ((year += 1900) < 1970)
if (year < 70)
year += 100;
tm->tm_sec = sec;
tm->tm_min = min;

9
arch/powerpc/platforms/maple/time.c
View File

@ -158,6 +158,11 @@ int maple_set_rtc_time(struct rtc_time *tm)
return 0;
}
static struct resource rtc_iores = {
.name = "rtc",
.flags = IORESOURCE_BUSY,
};
unsigned long __init maple_get_boot_time(void)
{
struct rtc_time tm;
@ -173,6 +178,10 @@ unsigned long __init maple_get_boot_time(void)
"legacy address (0x%x)\n", maple_rtc_addr);
}
rtc_iores.start = maple_rtc_addr;
rtc_iores.end = maple_rtc_addr + 7;
request_resource(&ioport_resource, &rtc_iores);
maple_get_rtc_time(&tm);
return mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday,
tm.tm_hour, tm.tm_min, tm.tm_sec);

3
arch/powerpc/platforms/pseries/eeh.c
View File

@ -86,7 +86,8 @@ static int ibm_read_slot_reset_state;
static int ibm_read_slot_reset_state2;
static int ibm_slot_error_detail;
static int eeh_subsystem_enabled;
int eeh_subsystem_enabled;
EXPORT_SYMBOL(eeh_subsystem_enabled);
/* Lock to avoid races due to multiple reports of an error */
static DEFINE_SPINLOCK(confirm_error_lock);

4
arch/powerpc/platforms/pseries/setup.c
View File

@ -504,7 +504,7 @@ static void pseries_dedicated_idle(void)
lpaca->lppaca.idle = 1;
if (!need_resched()) {
start_snooze = __get_tb() +
start_snooze = get_tb() +
*smt_snooze_delay * tb_ticks_per_usec;
while (!need_resched() && !cpu_is_offline(cpu)) {
@ -518,7 +518,7 @@ static void pseries_dedicated_idle(void)
HMT_very_low();
if (*smt_snooze_delay != 0 &&
__get_tb() > start_snooze) {
get_tb() > start_snooze) {
HMT_medium();
dedicated_idle_sleep(cpu);
}

4
arch/ppc/kernel/Makefile
View File

@ -13,7 +13,7 @@ extra-$(CONFIG_POWER4) += idle_power4.o
extra-y += vmlinux.lds
obj-y := entry.o traps.o idle.o time.o misc.o \
process.o align.o \
process.o \
setup.o \
ppc_htab.o
obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o
@ -38,7 +38,7 @@ endif
# These are here while we do the architecture merge
else
obj-y := idle.o align.o
obj-y := idle.o
obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o
obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o
obj-$(CONFIG_MODULES) += module.o

410
arch/ppc/kernel/align.c
View File

@ -1,410 +0,0 @@
/*
* align.c - handle alignment exceptions for the Power PC.
*
* Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
* Copyright (c) 1998-1999 TiVo, Inc.
* PowerPC 403GCX modifications.
* Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
* PowerPC 403GCX/405GP modifications.
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <asm/ptrace.h>
#include <asm/processor.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/cache.h>
struct aligninfo {
unsigned char len;
unsigned char flags;
};
#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE)
#define OPCD(inst) (((inst) & 0xFC000000) >> 26)
#define RS(inst) (((inst) & 0x03E00000) >> 21)
#define RA(inst) (((inst) & 0x001F0000) >> 16)
#define IS_XFORM(code) ((code) == 31)
#endif
#define INVALID { 0, 0 }
#define LD 1 /* load */
#define ST 2 /* store */
#define SE 4 /* sign-extend value */
#define F 8 /* to/from fp regs */
#define U 0x10 /* update index register */
#define M 0x20 /* multiple load/store */
#define S 0x40 /* single-precision fp, or byte-swap value */
#define SX 0x40 /* byte count in XER */
#define HARD 0x80 /* string, stwcx. */
#define DCBZ 0x5f /* 8xx/82xx dcbz faults when cache not enabled */
/*
* The PowerPC stores certain bits of the instruction that caused the
* alignment exception in the DSISR register. This array maps those
* bits to information about the operand length and what the
* instruction would do.
*/
static struct aligninfo aligninfo[128] = {
{ 4, LD }, /* 00 0 0000: lwz / lwarx */
INVALID, /* 00 0 0001 */
{ 4, ST }, /* 00 0 0010: stw */
INVALID, /* 00 0 0011 */
{ 2, LD }, /* 00 0 0100: lhz */
{ 2, LD+SE }, /* 00 0 0101: lha */
{ 2, ST }, /* 00 0 0110: sth */
{ 4, LD+M }, /* 00 0 0111: lmw */
{ 4, LD+F+S }, /* 00 0 1000: lfs */
{ 8, LD+F }, /* 00 0 1001: lfd */
{ 4, ST+F+S }, /* 00 0 1010: stfs */
{ 8, ST+F }, /* 00 0 1011: stfd */
INVALID, /* 00 0 1100 */
INVALID, /* 00 0 1101: ld/ldu/lwa */
INVALID, /* 00 0 1110 */
INVALID, /* 00 0 1111: std/stdu */
{ 4, LD+U }, /* 00 1 0000: lwzu */
INVALID, /* 00 1 0001 */
{ 4, ST+U }, /* 00 1 0010: stwu */
INVALID, /* 00 1 0011 */
{ 2, LD+U }, /* 00 1 0100: lhzu */
{ 2, LD+SE+U }, /* 00 1 0101: lhau */
{ 2, ST+U }, /* 00 1 0110: sthu */
{ 4, ST+M }, /* 00 1 0111: stmw */
{ 4, LD+F+S+U }, /* 00 1 1000: lfsu */
{ 8, LD+F+U }, /* 00 1 1001: lfdu */
{ 4, ST+F+S+U }, /* 00 1 1010: stfsu */
{ 8, ST+F+U }, /* 00 1 1011: stfdu */
INVALID, /* 00 1 1100 */
INVALID, /* 00 1 1101 */
INVALID, /* 00 1 1110 */
INVALID, /* 00 1 1111 */
INVALID, /* 01 0 0000: ldx */
INVALID, /* 01 0 0001 */
INVALID, /* 01 0 0010: stdx */
INVALID, /* 01 0 0011 */
INVALID, /* 01 0 0100 */
INVALID, /* 01 0 0101: lwax */
INVALID, /* 01 0 0110 */
INVALID, /* 01 0 0111 */
{ 4, LD+M+HARD+SX }, /* 01 0 1000: lswx */
{ 4, LD+M+HARD }, /* 01 0 1001: lswi */
{ 4, ST+M+HARD+SX }, /* 01 0 1010: stswx */
{ 4, ST+M+HARD }, /* 01 0 1011: stswi */
INVALID, /* 01 0 1100 */
INVALID, /* 01 0 1101 */
INVALID, /* 01 0 1110 */
INVALID, /* 01 0 1111 */
INVALID, /* 01 1 0000: ldux */
INVALID, /* 01 1 0001 */
INVALID, /* 01 1 0010: stdux */
INVALID, /* 01 1 0011 */
INVALID, /* 01 1 0100 */
INVALID, /* 01 1 0101: lwaux */
INVALID, /* 01 1 0110 */
INVALID, /* 01 1 0111 */
INVALID, /* 01 1 1000 */
INVALID, /* 01 1 1001 */
INVALID, /* 01 1 1010 */
INVALID, /* 01 1 1011 */
INVALID, /* 01 1 1100 */
INVALID, /* 01 1 1101 */
INVALID, /* 01 1 1110 */
INVALID, /* 01 1 1111 */
INVALID, /* 10 0 0000 */
INVALID, /* 10 0 0001 */
{ 0, ST+HARD }, /* 10 0 0010: stwcx. */
INVALID, /* 10 0 0011 */
INVALID, /* 10 0 0100 */
INVALID, /* 10 0 0101 */
INVALID, /* 10 0 0110 */
INVALID, /* 10 0 0111 */
{ 4, LD+S }, /* 10 0 1000: lwbrx */
INVALID, /* 10 0 1001 */
{ 4, ST+S }, /* 10 0 1010: stwbrx */
INVALID, /* 10 0 1011 */
{ 2, LD+S }, /* 10 0 1100: lhbrx */
INVALID, /* 10 0 1101 */
{ 2, ST+S }, /* 10 0 1110: sthbrx */
INVALID, /* 10 0 1111 */
INVALID, /* 10 1 0000 */
INVALID, /* 10 1 0001 */
INVALID, /* 10 1 0010 */
INVALID, /* 10 1 0011 */
INVALID, /* 10 1 0100 */
INVALID, /* 10 1 0101 */
INVALID, /* 10 1 0110 */
INVALID, /* 10 1 0111 */
INVALID, /* 10 1 1000 */
INVALID, /* 10 1 1001 */
INVALID, /* 10 1 1010 */
INVALID, /* 10 1 1011 */
INVALID, /* 10 1 1100 */
INVALID, /* 10 1 1101 */
INVALID, /* 10 1 1110 */
{ 0, ST+HARD }, /* 10 1 1111: dcbz */
{ 4, LD }, /* 11 0 0000: lwzx */
INVALID, /* 11 0 0001 */
{ 4, ST }, /* 11 0 0010: stwx */
INVALID, /* 11 0 0011 */
{ 2, LD }, /* 11 0 0100: lhzx */
{ 2, LD+SE }, /* 11 0 0101: lhax */
{ 2, ST }, /* 11 0 0110: sthx */
INVALID, /* 11 0 0111 */
{ 4, LD+F+S }, /* 11 0 1000: lfsx */
{ 8, LD+F }, /* 11 0 1001: lfdx */
{ 4, ST+F+S }, /* 11 0 1010: stfsx */
{ 8, ST+F }, /* 11 0 1011: stfdx */
INVALID, /* 11 0 1100 */
INVALID, /* 11 0 1101: lmd */
INVALID, /* 11 0 1110 */
INVALID, /* 11 0 1111: stmd */
{ 4, LD+U }, /* 11 1 0000: lwzux */
INVALID, /* 11 1 0001 */
{ 4, ST+U }, /* 11 1 0010: stwux */
INVALID, /* 11 1 0011 */
{ 2, LD+U }, /* 11 1 0100: lhzux */
{ 2, LD+SE+U }, /* 11 1 0101: lhaux */
{ 2, ST+U }, /* 11 1 0110: sthux */
INVALID, /* 11 1 0111 */
{ 4, LD+F+S+U }, /* 11 1 1000: lfsux */
{ 8, LD+F+U }, /* 11 1 1001: lfdux */
{ 4, ST+F+S+U }, /* 11 1 1010: stfsux */
{ 8, ST+F+U }, /* 11 1 1011: stfdux */
INVALID, /* 11 1 1100 */
INVALID, /* 11 1 1101 */
INVALID, /* 11 1 1110 */
INVALID, /* 11 1 1111 */
};
#define SWAP(a, b) (t = (a), (a) = (b), (b) = t)
int
fix_alignment(struct pt_regs *regs)
{
int instr, nb, flags;
#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE)
int opcode, f1, f2, f3;
#endif
int i, t;
int reg, areg;
int offset, nb0;
unsigned char __user *addr;
unsigned char *rptr;
union {
long l;
float f;
double d;
unsigned char v[8];
} data;
CHECK_FULL_REGS(regs);
#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE)
/* The 4xx-family & Book-E processors have no DSISR register,
* so we emulate it.
* The POWER4 has a DSISR register but doesn't set it on
* an alignment fault. -- paulus
*/
if (__get_user(instr, (unsigned int __user *) regs->nip))
return 0;
opcode = OPCD(instr);
reg = RS(instr);
areg = RA(instr);
if (!IS_XFORM(opcode)) {
f1 = 0;
f2 = (instr & 0x04000000) >> 26;
f3 = (instr & 0x78000000) >> 27;
} else {
f1 = (instr & 0x00000006) >> 1;
f2 = (instr & 0x00000040) >> 6;
f3 = (instr & 0x00000780) >> 7;
}
instr = ((f1 << 5) | (f2 << 4) | f3);
#else
reg = (regs->dsisr >> 5) & 0x1f; /* source/dest register */
areg = regs->dsisr & 0x1f; /* register to update */
instr = (regs->dsisr >> 10) & 0x7f;
#endif
nb = aligninfo[instr].len;
if (nb == 0) {
long __user *p;
int i;
if (instr != DCBZ)
return 0; /* too hard or invalid instruction */
/*
* The dcbz (data cache block zero) instruction
* gives an alignment fault if used on non-cacheable
* memory. We handle the fault mainly for the
* case when we are running with the cache disabled
* for debugging.
*/
p = (long __user *) (regs->dar & -L1_CACHE_BYTES);
if (user_mode(regs)
&& !access_ok(VERIFY_WRITE, p, L1_CACHE_BYTES))
return -EFAULT;
for (i = 0; i < L1_CACHE_BYTES / sizeof(long); ++i)
if (__put_user(0, p+i))
return -EFAULT;
return 1;
}
flags = aligninfo[instr].flags;
if ((flags & (LD|ST)) == 0)
return 0;
/* For the 4xx-family & Book-E processors, the 'dar' field of the
* pt_regs structure is overloaded and is really from the DEAR.
*/
addr = (unsigned char __user *)regs->dar;
if (flags & M) {
/* lmw, stmw, lswi/x, stswi/x */
nb0 = 0;
if (flags & HARD) {
if (flags & SX) {
nb = regs->xer & 127;
if (nb == 0)
return 1;
} else {
if (__get_user(instr,
(unsigned int __user *)regs->nip))
return 0;
nb = (instr >> 11) & 0x1f;
if (nb == 0)
nb = 32;
}
if (nb + reg * 4 > 128) {
nb0 = nb + reg * 4 - 128;
nb = 128 - reg * 4;
}
} else {
/* lwm, stmw */
nb = (32 - reg) * 4;
}
if (!access_ok((flags & ST? VERIFY_WRITE: VERIFY_READ), addr, nb+nb0))
return -EFAULT; /* bad address */
rptr = (unsigned char *) &regs->gpr[reg];
if (flags & LD) {
for (i = 0; i < nb; ++i)
if (__get_user(rptr[i], addr+i))
return -EFAULT;
if (nb0 > 0) {
rptr = (unsigned char *) &regs->gpr[0];
addr += nb;
for (i = 0; i < nb0; ++i)
if (__get_user(rptr[i], addr+i))
return -EFAULT;
}
for (; (i & 3) != 0; ++i)
rptr[i] = 0;
} else {
for (i = 0; i < nb; ++i)
if (__put_user(rptr[i], addr+i))
return -EFAULT;
if (nb0 > 0) {
rptr = (unsigned char *) &regs->gpr[0];
addr += nb;
for (i = 0; i < nb0; ++i)
if (__put_user(rptr[i], addr+i))
return -EFAULT;
}
}
return 1;
}
offset = 0;
if (nb < 4) {
/* read/write the least significant bits */
data.l = 0;
offset = 4 - nb;
}
/* Verify the address of the operand */
if (user_mode(regs)) {
if (!access_ok((flags & ST? VERIFY_WRITE: VERIFY_READ), addr, nb))
return -EFAULT; /* bad address */
}
if (flags & F) {
preempt_disable();
if (regs->msr & MSR_FP)
giveup_fpu(current);
preempt_enable();
}
/* If we read the operand, copy it in, else get register values */
if (flags & LD) {
for (i = 0; i < nb; ++i)
if (__get_user(data.v[offset+i], addr+i))
return -EFAULT;
} else if (flags & F) {
data.d = current->thread.fpr[reg];
} else {
data.l = regs->gpr[reg];
}
switch (flags & ~U) {
case LD+SE: /* sign extend */
if (data.v[2] >= 0x80)
data.v[0] = data.v[1] = -1;
break;
case LD+S: /* byte-swap */
case ST+S:
if (nb == 2) {
SWAP(data.v[2], data.v[3]);
} else {
SWAP(data.v[0], data.v[3]);
SWAP(data.v[1], data.v[2]);
}
break;
/* Single-precision FP load and store require conversions... */
case LD+F+S:
#ifdef CONFIG_PPC_FPU
preempt_disable();
enable_kernel_fp();
cvt_fd(&data.f, &data.d, &current->thread);
preempt_enable();
#else
return 0;
#endif
break;
case ST+F+S:
#ifdef CONFIG_PPC_FPU
preempt_disable();
enable_kernel_fp();
cvt_df(&data.d, &data.f, &current->thread);
preempt_enable();
#else
return 0;
#endif
break;
}
if (flags & ST) {
for (i = 0; i < nb; ++i)
if (__put_user(data.v[offset+i], addr+i))
return -EFAULT;
} else if (flags & F) {
current->thread.fpr[reg] = data.d;
} else {
regs->gpr[reg] = data.l;
}
if (flags & U)
regs->gpr[areg] = regs->dar;
return 1;
}

1
arch/ppc/kernel/pci.c
View File

@ -45,7 +45,6 @@ static void update_bridge_base(struct pci_bus *bus, int i);
static void pcibios_fixup_resources(struct pci_dev* dev);
static void fixup_broken_pcnet32(struct pci_dev* dev);
static int reparent_resources(struct resource *parent, struct resource *res);
static void fixup_rev1_53c810(struct pci_dev* dev);
static void fixup_cpc710_pci64(struct pci_dev* dev);
#ifdef CONFIG_PPC_OF
static u8* pci_to_OF_bus_map;

2
arch/ppc/platforms/85xx/mpc85xx_ads_common.h
View File

@ -25,6 +25,8 @@
#define BCSR_ADDR ((uint)0xf8000000)
#define BCSR_SIZE ((uint)(32 * 1024))
struct seq_file;
extern int mpc85xx_ads_show_cpuinfo(struct seq_file *m);
extern void mpc85xx_ads_init_IRQ(void) __init;
extern void mpc85xx_ads_map_io(void) __init;

2
arch/ppc/platforms/85xx/stx_gp3.h
View File

@ -21,7 +21,6 @@
#include <linux/config.h>
#include <linux/init.h>
#include <linux/seq_file.h>
#include <asm/ppcboot.h>
#define BOARD_CCSRBAR ((uint)0xe0000000)
@ -43,7 +42,6 @@ extern void mpc85xx_setup_hose(void) __init;
extern void mpc85xx_restart(char *cmd);
extern void mpc85xx_power_off(void);
extern void mpc85xx_halt(void);
extern int mpc85xx_show_cpuinfo(struct seq_file *m);
extern void mpc85xx_init_IRQ(void) __init;
extern unsigned long mpc85xx_find_end_of_memory(void) __init;
extern void mpc85xx_calibrate_decr(void) __init;

28
arch/ppc/syslib/mpc83xx_sys.c
View File

@ -69,9 +69,33 @@ struct ppc_sys_spec ppc_sys_specs[] = {
},
},
{
.ppc_sys_name = "8343E",
.ppc_sys_name = "8347E",
.mask = 0xFFFF0000,
.value = 0x80540000,
.num_devices = 9,
.device_list = (enum ppc_sys_devices[])
{
MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1,
MPC83xx_IIC2, MPC83xx_DUART, MPC83xx_SEC2,
MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO
},
},
{
.ppc_sys_name = "8347",
.mask = 0xFFFF0000,
.value = 0x80550000,
.num_devices = 8,
.device_list = (enum ppc_sys_devices[])
{
MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1,
MPC83xx_IIC2, MPC83xx_DUART,
MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO
},
},
{
.ppc_sys_name = "8343E",
.mask = 0xFFFF0000,
.value = 0x80560000,
.num_devices = 8,
.device_list = (enum ppc_sys_devices[])
{
@ -83,7 +107,7 @@ struct ppc_sys_spec ppc_sys_specs[] = {
{
.ppc_sys_name = "8343",
.mask = 0xFFFF0000,
.value = 0x80550000,
.value = 0x80570000,
.num_devices = 7,
.device_list = (enum ppc_sys_devices[])
{

65
arch/ppc64/Kconfig.debug
View File

@ -1,65 +0,0 @@
menu "Kernel hacking"
source "lib/Kconfig.debug"
config DEBUG_STACKOVERFLOW
bool "Check for stack overflows"
depends on DEBUG_KERNEL
help
This option will cause messages to be printed if free stack space
drops below a certain limit.
config KPROBES
bool "Kprobes"
depends on DEBUG_KERNEL
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes
a probepoint and specifies the callback. Kprobes is useful
for kernel debugging, non-intrusive instrumentation and testing.
If in doubt, say "N".
config DEBUG_STACK_USAGE
bool "Stack utilization instrumentation"
depends on DEBUG_KERNEL
help
Enables the display of the minimum amount of free stack which each
task has ever had available in the sysrq-T and sysrq-P debug output.
This option will slow down process creation somewhat.
config DEBUGGER
bool "Enable debugger hooks"
depends on DEBUG_KERNEL
help
Include in-kernel hooks for kernel debuggers. Unless you are
intending to debug the kernel, say N here.
config XMON
bool "Include xmon kernel debugger"
depends on DEBUGGER && !PPC_ISERIES
help
Include in-kernel hooks for the xmon kernel monitor/debugger.
Unless you are intending to debug the kernel, say N here.
Make sure to enable also CONFIG_BOOTX_TEXT on Macs. Otherwise
nothing will appear on the screen (xmon writes directly to the
framebuffer memory).
The cmdline option 'xmon' or 'xmon=early' will drop into xmon very
early during boot. 'xmon=on' will just enable the xmon debugger hooks.
'xmon=off' will disable the debugger hooks if CONFIG_XMON_DEFAULT is set.
config XMON_DEFAULT
bool "Enable xmon by default"
depends on XMON
help
xmon is normally disabled unless booted with 'xmon=on'.
Use 'xmon=off' to disable xmon init during runtime.
config IRQSTACKS
bool "Use separate kernel stacks when processing interrupts"
help
If you say Y here the kernel will use separate kernel stacks
for handling hard and soft interrupts. This can help avoid
overflowing the process kernel stacks.
endmenu

142
arch/ppc64/Makefile
View File

@ -1,142 +0,0 @@
# This file is included by the global makefile so that you can add your own
# architecture-specific flags and dependencies. Remember to do have actions
# for "archclean" and "archdep" for cleaning up and making dependencies for
# this architecture
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
# Copyright (C) 1994 by Linus Torvalds
# Changes for PPC by Gary Thomas
# Rewritten by Cort Dougan and Paul Mackerras
# Adjusted for PPC64 by Tom Gall
#
KERNELLOAD := 0xc000000000000000
# Set default 32 bits cross compilers for vdso and boot wrapper
CROSS32_COMPILE ?=
CROSS32CC := $(CROSS32_COMPILE)gcc
CROSS32AS := $(CROSS32_COMPILE)as
CROSS32LD := $(CROSS32_COMPILE)ld
CROSS32OBJCOPY := $(CROSS32_COMPILE)objcopy
# If we have a biarch compiler, use it for 32 bits cross compile if
# CROSS32_COMPILE wasn't explicitely defined, and add proper explicit
# target type to target compilers
HAS_BIARCH := $(call cc-option-yn, -m64)
ifeq ($(HAS_BIARCH),y)
ifeq ($(CROSS32_COMPILE),)
CROSS32CC := $(CC) -m32
CROSS32AS := $(AS) -a32
CROSS32LD := $(LD) -m elf32ppc
CROSS32OBJCOPY := $(OBJCOPY)
endif
override AS += -a64
override LD += -m elf64ppc
override CC += -m64
endif
export CROSS32CC CROSS32AS CROSS32LD CROSS32OBJCOPY
new_nm := $(shell if $(NM) --help 2>&1 | grep -- '--synthetic' > /dev/null; then echo y; else echo n; fi)
ifeq ($(new_nm),y)
NM := $(NM) --synthetic
endif
CHECKFLAGS += -m64 -D__powerpc__ -D__powerpc64__
LDFLAGS := -m elf64ppc
LDFLAGS_vmlinux := -Bstatic -e $(KERNELLOAD) -Ttext $(KERNELLOAD)
CFLAGS += -msoft-float -pipe -mminimal-toc -mtraceback=none \
-mcall-aixdesc
# Temporary hack until we have migrated to asm-powerpc
CPPFLAGS += -Iarch/$(ARCH)/include
GCC_VERSION := $(call cc-version)
GCC_BROKEN_VEC := $(shell if [ $(GCC_VERSION) -lt 0400 ] ; then echo "y"; fi ;)
ifeq ($(CONFIG_POWER4_ONLY),y)
ifeq ($(CONFIG_ALTIVEC),y)
ifeq ($(GCC_BROKEN_VEC),y)
CFLAGS += $(call cc-option,-mcpu=970)
else
CFLAGS += $(call cc-option,-mcpu=power4)
endif
else
CFLAGS += $(call cc-option,-mcpu=power4)
endif
else
CFLAGS += $(call cc-option,-mtune=power4)
endif
# No AltiVec instruction when building kernel
CFLAGS += $(call cc-option, -mno-altivec)
# Enable unit-at-a-time mode when possible. It shrinks the
# kernel considerably.
CFLAGS += $(call cc-option,-funit-at-a-time)
head-y := arch/ppc64/kernel/head.o
head-y += arch/powerpc/kernel/fpu.o
head-y += arch/powerpc/kernel/entry_64.o
core-y += arch/ppc64/kernel/ arch/powerpc/kernel/
core-y += arch/powerpc/mm/
core-y += arch/powerpc/sysdev/
core-y += arch/powerpc/platforms/
core-y += arch/powerpc/lib/
core-$(CONFIG_XMON) += arch/powerpc/xmon/
drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/
boot := arch/ppc64/boot
boottargets-$(CONFIG_PPC_PSERIES) += zImage zImage.initrd
boottargets-$(CONFIG_PPC_PMAC) += zImage.vmode zImage.initrd.vmode
boottargets-$(CONFIG_PPC_MAPLE) += zImage zImage.initrd
boottargets-$(CONFIG_PPC_ISERIES) += vmlinux.sminitrd vmlinux.initrd vmlinux.sm
boottargets-$(CONFIG_PPC_BPA) += zImage zImage.initrd
$(boottargets-y): vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
bootimage-$(CONFIG_PPC_PSERIES) := $(boot)/zImage
bootimage-$(CONFIG_PPC_PMAC) := vmlinux
bootimage-$(CONFIG_PPC_MAPLE) := $(boot)/zImage
bootimage-$(CONFIG_PPC_BPA) := $(boot)/zImage
bootimage-$(CONFIG_PPC_ISERIES) := vmlinux
BOOTIMAGE := $(bootimage-y)
install: vmlinux
$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) $@
defaultimage-$(CONFIG_PPC_PSERIES) := zImage
defaultimage-$(CONFIG_PPC_PMAC) := zImage.vmode
defaultimage-$(CONFIG_PPC_MAPLE) := zImage
defaultimage-$(CONFIG_PPC_ISERIES) := vmlinux
KBUILD_IMAGE := $(defaultimage-y)
all: $(KBUILD_IMAGE)
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
# Temporary hack until we have migrated to asm-powerpc
$(Q)rm -rf arch/$(ARCH)/include
# Temporary hack until we have migrated to asm-powerpc
include/asm: arch/$(ARCH)/include/asm
arch/$(ARCH)/include/asm:
$(Q)if [ ! -d arch/$(ARCH)/include ]; then mkdir -p arch/$(ARCH)/include; fi
$(Q)ln -fsn $(srctree)/include/asm-powerpc arch/$(ARCH)/include/asm
define archhelp
echo ' zImage.vmode - Compressed kernel image (arch/$(ARCH)/boot/zImage.vmode)'
echo ' zImage.initrd.vmode - Compressed kernel image with initrd attached,'
echo ' sourced from arch/$(ARCH)/boot/ramdisk.image.gz'
echo ' (arch/$(ARCH)/boot/zImage.initrd.vmode)'
echo ' zImage - zImage for pSeries machines'
echo ' zImage.initrd - zImage with initrd for pSeries machines'
endef

1024
arch/ppc64/configs/bpa_defconfig
View File

File diff suppressed because it is too large Load Diff

1392
arch/ppc64/configs/g5_defconfig
View File

File diff suppressed because it is too large Load Diff

998
arch/ppc64/configs/iSeries_defconfig
View File

@ -1,998 +0,0 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.14-rc4
# Thu Oct 20 08:30:56 2005
#
CONFIG_64BIT=y
CONFIG_MMU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_FORCE_MAX_ZONEORDER=13
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_SYSVIPC_COMPAT=y
#
# Platform support
#
CONFIG_PPC_ISERIES=y
# CONFIG_PPC_MULTIPLATFORM is not set
CONFIG_PPC=y
CONFIG_PPC64=y
CONFIG_IBMVIO=y
# CONFIG_POWER4_ONLY is not set
CONFIG_IOMMU_VMERGE=y
CONFIG_SMP=y
CONFIG_NR_CPUS=32
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_NUMA is not set
# CONFIG_SCHED_SMT is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_PREEMPT_BKL is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_GENERIC_HARDIRQS=y
CONFIG_LPARCFG=y
CONFIG_SECCOMP=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_ISA_DMA_API=y
#
# Bus Options
#
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_NETLINK is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
CONFIG_IP_NF_CONNTRACK_EVENTS=y
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
# CONFIG_IP_NF_NETBIOS_NS is not set
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
CONFIG_IP_NF_MATCH_SCTP=m
# CONFIG_IP_NF_MATCH_DCCP is not set
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_CONNMARK=m
CONFIG_IP_NF_MATCH_CONNBYTES=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_MATCH_STRING=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_TARGET_NFQUEUE=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CONNMARK=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
CONFIG_SCSI_IBMVSCSI=m
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=m
CONFIG_MD_RAID5=y
CONFIG_MD_RAID6=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=y
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
# CONFIG_DM_MULTIPATH is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Macintosh device drivers
#
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
# CONFIG_E1000_NAPI is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
CONFIG_TR=y
CONFIG_IBMOL=y
# CONFIG_3C359 is not set
# CONFIG_TMS380TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
CONFIG_ISERIES_VETH=y
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_RX=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
CONFIG_SERIAL_ICOM=m
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
#
# Misc devices
#
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# SN Devices
#
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_EXPORT=y
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# iSeries device drivers
#
CONFIG_VIOCONS=y
CONFIG_VIODASD=y
CONFIG_VIOCD=m
CONFIG_VIOTAPE=m
CONFIG_VIOPATH=y
#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_KPROBES is not set
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUGGER is not set
# CONFIG_PPCDBG is not set
CONFIG_IRQSTACKS=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m
#
# Hardware crypto devices
#
#
# Library routines
#
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m

1062
arch/ppc64/configs/maple_defconfig
View File

File diff suppressed because it is too large Load Diff

1371
arch/ppc64/configs/pSeries_defconfig
View File

File diff suppressed because it is too large Load Diff

7
arch/ppc64/kernel/Makefile
View File

@ -1,7 +0,0 @@
#
# Makefile for the linux ppc64 kernel.
#
obj-y += idle.o align.o
obj-$(CONFIG_PPC_MULTIPLATFORM) += nvram.o

14
drivers/acpi/processor_idle.c
View File

@ -514,8 +514,6 @@ static int acpi_processor_set_power_policy(struct acpi_processor *pr)
static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr)
{
int i;
ACPI_FUNCTION_TRACE("acpi_processor_get_power_info_fadt");
if (!pr)
@ -524,8 +522,7 @@ static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr)
if (!pr->pblk)
return_VALUE(-ENODEV);
for (i = 0; i < ACPI_PROCESSOR_MAX_POWER; i++)
memset(pr->power.states, 0, sizeof(struct acpi_processor_cx));
memset(pr->power.states, 0, sizeof(pr->power.states));
/* if info is obtained from pblk/fadt, type equals state */
pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1;
@ -555,13 +552,9 @@ static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr)
static int acpi_processor_get_power_info_default_c1(struct acpi_processor *pr)
{
int i;
ACPI_FUNCTION_TRACE("acpi_processor_get_power_info_default_c1");
for (i = 0; i < ACPI_PROCESSOR_MAX_POWER; i++)
memset(&(pr->power.states[i]), 0,
sizeof(struct acpi_processor_cx));
memset(pr->power.states, 0, sizeof(pr->power.states));
/* if info is obtained from pblk/fadt, type equals state */
pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1;
@ -873,7 +866,8 @@ static int acpi_processor_get_power_info(struct acpi_processor *pr)
for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) {
if (pr->power.states[i].valid) {
pr->power.count = i;
pr->flags.power = 1;
if (pr->power.states[i].type >= ACPI_STATE_C2)
pr->flags.power = 1;
}
}

2
drivers/char/ipmi/ipmi_si_intf.c
View File

@ -2203,7 +2203,7 @@ static void setup_xaction_handlers(struct smi_info *smi_info)
static inline void wait_for_timer_and_thread(struct smi_info *smi_info)
{
if (smi_info->thread != ERR_PTR(-ENOMEM))
if (smi_info->thread != NULL && smi_info->thread != ERR_PTR(-ENOMEM))
kthread_stop(smi_info->thread);
del_timer_sync(&smi_info->si_timer);
}

2
drivers/char/tpm/Kconfig
View File

@ -6,7 +6,7 @@ menu "TPM devices"
config TCG_TPM
tristate "TPM Hardware Support"
depends on EXPERIMENTAL && PCI
depends on EXPERIMENTAL
---help---
If you have a TPM security chip in your system, which
implements the Trusted Computing Group's specification,

2
drivers/char/tpm/tpm.c
View File

@ -377,6 +377,7 @@ int tpm_release(struct inode *inode, struct file *file)
file->private_data = NULL;
chip->num_opens--;
del_singleshot_timer_sync(&chip->user_read_timer);
flush_scheduled_work();
atomic_set(&chip->data_pending, 0);
put_device(chip->dev);
kfree(chip->data_buffer);
@ -428,6 +429,7 @@ ssize_t tpm_read(struct file * file, char __user *buf,
int ret_size;
del_singleshot_timer_sync(&chip->user_read_timer);
flush_scheduled_work();
ret_size = atomic_read(&chip->data_pending);
atomic_set(&chip->data_pending, 0);
if (ret_size > 0) { /* relay data */

47
drivers/char/tpm/tpm_atmel.c
View File

@ -47,13 +47,12 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count)
return -EIO;
for (i = 0; i < 6; i++) {
status = atmel_getb(chip, 1);
status = ioread8(chip->vendor->iobase + 1);
if ((status & ATML_STATUS_DATA_AVAIL) == 0) {
dev_err(chip->dev,
"error reading header\n");
dev_err(chip->dev, "error reading header\n");
return -EIO;
}
*buf++ = atmel_getb(chip, 0);
*buf++ = ioread8(chip->vendor->iobase);
}
/* size of the data received */
@ -64,10 +63,9 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count)
dev_err(chip->dev,
"Recv size(%d) less than available space\n", size);
for (; i < size; i++) { /* clear the waiting data anyway */
status = atmel_getb(chip, 1);
status = ioread8(chip->vendor->iobase + 1);
if ((status & ATML_STATUS_DATA_AVAIL) == 0) {
dev_err(chip->dev,
"error reading data\n");
dev_err(chip->dev, "error reading data\n");
return -EIO;
}
}
@ -76,17 +74,17 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count)
/* read all the data available */
for (; i < size; i++) {
status = atmel_getb(chip, 1);
status = ioread8(chip->vendor->iobase + 1);
if ((status & ATML_STATUS_DATA_AVAIL) == 0) {
dev_err(chip->dev,
"error reading data\n");
dev_err(chip->dev, "error reading data\n");
return -EIO;
}
*buf++ = atmel_getb(chip, 0);
*buf++ = ioread8(chip->vendor->iobase);
}
/* make sure data available is gone */
status = atmel_getb(chip, 1);
status = ioread8(chip->vendor->iobase + 1);
if (status & ATML_STATUS_DATA_AVAIL) {
dev_err(chip->dev, "data available is stuck\n");
return -EIO;
@ -102,7 +100,7 @@ static int tpm_atml_send(struct tpm_chip *chip, u8 *buf, size_t count)
dev_dbg(chip->dev, "tpm_atml_send:\n");
for (i = 0; i < count; i++) {
dev_dbg(chip->dev, "%d 0x%x(%d)\n", i, buf[i], buf[i]);
atmel_putb(buf[i], chip, 0);
iowrite8(buf[i], chip->vendor->iobase);
}
return count;
@ -110,12 +108,12 @@ static int tpm_atml_send(struct tpm_chip *chip, u8 *buf, size_t count)
static void tpm_atml_cancel(struct tpm_chip *chip)
{
atmel_putb(ATML_STATUS_ABORT, chip, 1);
iowrite8(ATML_STATUS_ABORT, chip->vendor->iobase + 1);
}
static u8 tpm_atml_status(struct tpm_chip *chip)
{
return atmel_getb(chip, 1);
return ioread8(chip->vendor->iobase + 1);
}
static struct file_operations atmel_ops = {
@ -162,7 +160,8 @@ static void atml_plat_remove(void)
if (chip) {
if (chip->vendor->have_region)
atmel_release_region(chip->vendor->base, chip->vendor->region_size);
atmel_release_region(chip->vendor->base,
chip->vendor->region_size);
atmel_put_base_addr(chip->vendor);
tpm_remove_hardware(chip->dev);
platform_device_unregister(pdev);
@ -183,14 +182,19 @@ static int __init init_atmel(void)
driver_register(&atml_drv);
if (atmel_get_base_addr(&tpm_atmel) != 0) {
if ((tpm_atmel.iobase = atmel_get_base_addr(&tpm_atmel)) == NULL) {
rc = -ENODEV;
goto err_unreg_drv;
}
tpm_atmel.have_region = (atmel_request_region( tpm_atmel.base, tpm_atmel.region_size, "tpm_atmel0") == NULL) ? 0 : 1;
tpm_atmel.have_region =
(atmel_request_region
(tpm_atmel.base, tpm_atmel.region_size,
"tpm_atmel0") == NULL) ? 0 : 1;
if (IS_ERR(pdev = platform_device_register_simple("tpm_atmel", -1, NULL, 0 ))) {
if (IS_ERR
(pdev =
platform_device_register_simple("tpm_atmel", -1, NULL, 0))) {
rc = PTR_ERR(pdev);
goto err_rel_reg;
}
@ -202,9 +206,10 @@ static int __init init_atmel(void)
err_unreg_dev:
platform_device_unregister(pdev);
err_rel_reg:
if (tpm_atmel.have_region)
atmel_release_region(tpm_atmel.base, tpm_atmel.region_size);
atmel_put_base_addr(&tpm_atmel);
if (tpm_atmel.have_region)
atmel_release_region(tpm_atmel.base,
tpm_atmel.region_size);
err_unreg_drv:
driver_unregister(&atml_drv);
return rc;

22
drivers/char/tpm/tpm_atmel.h
View File

@ -27,12 +27,14 @@
#define atmel_putb(val, chip, offset) writeb(val, chip->vendor->iobase + offset)
#define atmel_request_region request_mem_region
#define atmel_release_region release_mem_region
static inline void atmel_put_base_addr(struct tpm_vendor_specific *vendor)
static inline void atmel_put_base_addr(struct tpm_vendor_specific
*vendor)
{
iounmap(vendor->iobase);
}
static int atmel_get_base_addr(struct tpm_vendor_specific *vendor)
static void __iomem * atmel_get_base_addr(struct tpm_vendor_specific *vendor)
{
struct device_node *dn;
unsigned long address, size;
@ -44,11 +46,11 @@ static int atmel_get_base_addr(struct tpm_vendor_specific *vendor)
dn = of_find_node_by_name(NULL, "tpm");
if (!dn)
return 1;
return NULL;
if (!device_is_compatible(dn, "AT97SC3201")) {
of_node_put(dn);
return 1;
return NULL;
}
reg = (unsigned int *) get_property(dn, "reg", &reglen);
@ -71,8 +73,7 @@ static int atmel_get_base_addr(struct tpm_vendor_specific *vendor)
vendor->base = address;
vendor->region_size = size;
vendor->iobase = ioremap(address, size);
return 0;
return ioremap(vendor->base, vendor->region_size);
}
#else
#define atmel_getb(chip, offset) inb(chip->vendor->base + offset)
@ -105,18 +106,19 @@ static int atmel_verify_tpm11(void)
return 0;
}
static inline void atmel_put_base_addr(struct tpm_vendor_specific *vendor)
static inline void atmel_put_base_addr(struct tpm_vendor_specific
*vendor)
{
}
/* Determine where to talk to device */
static unsigned long atmel_get_base_addr(struct tpm_vendor_specific
static void __iomem * atmel_get_base_addr(struct tpm_vendor_specific
*vendor)
{
int lo, hi;
if (atmel_verify_tpm11() != 0)
return 1;
return NULL;
lo = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_LO);
hi = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_HI);
@ -124,6 +126,6 @@ static unsigned long atmel_get_base_addr(struct tpm_vendor_specific
vendor->base = (hi << 8) | lo;
vendor->region_size = 2;
return 0;
return ioport_map(vendor->base, vendor->region_size);
}
#endif

4
drivers/md/bitmap.c
View File

@ -326,9 +326,9 @@ static int write_page(struct bitmap *bitmap, struct page *page, int wait)
}
}
ret = page->mapping->a_ops->prepare_write(NULL, page, 0, PAGE_SIZE);
ret = page->mapping->a_ops->prepare_write(bitmap->file, page, 0, PAGE_SIZE);
if (!ret)
ret = page->mapping->a_ops->commit_write(NULL, page, 0,
ret = page->mapping->a_ops->commit_write(bitmap->file, page, 0,
PAGE_SIZE);
if (ret) {
unlock_page(page);

17
drivers/md/md.c
View File

@ -3846,11 +3846,20 @@ static int is_mddev_idle(mddev_t *mddev)
curr_events = disk_stat_read(disk, sectors[0]) +
disk_stat_read(disk, sectors[1]) -
atomic_read(&disk->sync_io);
/* Allow some slack between valud of curr_events and last_events,
* as there are some uninteresting races.
/* The difference between curr_events and last_events
* will be affected by any new non-sync IO (making
* curr_events bigger) and any difference in the amount of
* in-flight syncio (making current_events bigger or smaller)
* The amount in-flight is currently limited to
* 32*64K in raid1/10 and 256*PAGE_SIZE in raid5/6
* which is at most 4096 sectors.
* These numbers are fairly fragile and should be made
* more robust, probably by enforcing the
* 'window size' that md_do_sync sort-of uses.
*
* Note: the following is an unsigned comparison.
*/
if ((curr_events - rdev->last_events + 32) > 64) {
if ((curr_events - rdev->last_events + 4096) > 8192) {
rdev->last_events = curr_events;
idle = 0;
}
@ -4109,7 +4118,7 @@ static void md_do_sync(mddev_t *mddev)
if (currspeed > sysctl_speed_limit_min) {
if ((currspeed > sysctl_speed_limit_max) ||
!is_mddev_idle(mddev)) {
msleep(250);
msleep(500);
goto repeat;
}
}

1
drivers/net/au1000_eth.c
View File

@ -32,6 +32,7 @@
*
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>

273
drivers/net/e100.c
View File

@ -156,7 +156,7 @@
#define DRV_NAME "e100"
#define DRV_EXT "-NAPI"
#define DRV_VERSION "3.4.14-k2"DRV_EXT
#define DRV_VERSION "3.4.14-k4"DRV_EXT
#define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver"
#define DRV_COPYRIGHT "Copyright(c) 1999-2005 Intel Corporation"
#define PFX DRV_NAME ": "
@ -903,8 +903,8 @@ static void mdio_write(struct net_device *netdev, int addr, int reg, int data)
static void e100_get_defaults(struct nic *nic)
{
struct param_range rfds = { .min = 16, .max = 256, .count = 64 };
struct param_range cbs = { .min = 64, .max = 256, .count = 64 };
struct param_range rfds = { .min = 16, .max = 256, .count = 256 };
struct param_range cbs = { .min = 64, .max = 256, .count = 128 };
pci_read_config_byte(nic->pdev, PCI_REVISION_ID, &nic->rev_id);
/* MAC type is encoded as rev ID; exception: ICH is treated as 82559 */
@ -1007,25 +1007,264 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]);
}
/********************************************************/
/* Micro code for 8086:1229 Rev 8 */
/********************************************************/
/* Parameter values for the D101M B-step */
#define D101M_CPUSAVER_TIMER_DWORD 78
#define D101M_CPUSAVER_BUNDLE_DWORD 65
#define D101M_CPUSAVER_MIN_SIZE_DWORD 126
#define D101M_B_RCVBUNDLE_UCODE \
{\
0x00550215, 0xFFFF0437, 0xFFFFFFFF, 0x06A70789, 0xFFFFFFFF, 0x0558FFFF, \
0x000C0001, 0x00101312, 0x000C0008, 0x00380216, \
0x0010009C, 0x00204056, 0x002380CC, 0x00380056, \
0x0010009C, 0x00244C0B, 0x00000800, 0x00124818, \
0x00380438, 0x00000000, 0x00140000, 0x00380555, \
0x00308000, 0x00100662, 0x00100561, 0x000E0408, \
0x00134861, 0x000C0002, 0x00103093, 0x00308000, \
0x00100624, 0x00100561, 0x000E0408, 0x00100861, \
0x000C007E, 0x00222C21, 0x000C0002, 0x00103093, \
0x00380C7A, 0x00080000, 0x00103090, 0x00380C7A, \
0x00000000, 0x00000000, 0x00000000, 0x00000000, \
0x0010009C, 0x00244C2D, 0x00010004, 0x00041000, \
0x003A0437, 0x00044010, 0x0038078A, 0x00000000, \
0x00100099, 0x00206C7A, 0x0010009C, 0x00244C48, \
0x00130824, 0x000C0001, 0x00101213, 0x00260C75, \
0x00041000, 0x00010004, 0x00130826, 0x000C0006, \
0x002206A8, 0x0013C926, 0x00101313, 0x003806A8, \
0x00000000, 0x00000000, 0x00000000, 0x00000000, \
0x00000000, 0x00000000, 0x00000000, 0x00000000, \
0x00080600, 0x00101B10, 0x00050004, 0x00100826, \
0x00101210, 0x00380C34, 0x00000000, 0x00000000, \
0x0021155B, 0x00100099, 0x00206559, 0x0010009C, \
0x00244559, 0x00130836, 0x000C0000, 0x00220C62, \
0x000C0001, 0x00101B13, 0x00229C0E, 0x00210C0E, \
0x00226C0E, 0x00216C0E, 0x0022FC0E, 0x00215C0E, \
0x00214C0E, 0x00380555, 0x00010004, 0x00041000, \
0x00278C67, 0x00040800, 0x00018100, 0x003A0437, \
0x00130826, 0x000C0001, 0x00220559, 0x00101313, \
0x00380559, 0x00000000, 0x00000000, 0x00000000, \
0x00000000, 0x00000000, 0x00000000, 0x00000000, \
0x00000000, 0x00130831, 0x0010090B, 0x00124813, \
0x000CFF80, 0x002606AB, 0x00041000, 0x00010004, \
0x003806A8, 0x00000000, 0x00000000, 0x00000000, \
}
/********************************************************/
/* Micro code for 8086:1229 Rev 9 */
/********************************************************/
/* Parameter values for the D101S */
#define D101S_CPUSAVER_TIMER_DWORD 78
#define D101S_CPUSAVER_BUNDLE_DWORD 67
#define D101S_CPUSAVER_MIN_SIZE_DWORD 128
#define D101S_RCVBUNDLE_UCODE \
{\
0x00550242, 0xFFFF047E, 0xFFFFFFFF, 0x06FF0818, 0xFFFFFFFF, 0x05A6FFFF, \
0x000C0001, 0x00101312, 0x000C0008, 0x00380243, \
0x0010009C, 0x00204056, 0x002380D0, 0x00380056, \
0x0010009C, 0x00244F8B, 0x00000800, 0x00124818, \
0x0038047F, 0x00000000, 0x00140000, 0x003805A3, \
0x00308000, 0x00100610, 0x00100561, 0x000E0408, \
0x00134861, 0x000C0002, 0x00103093, 0x00308000, \
0x00100624, 0x00100561, 0x000E0408, 0x00100861, \
0x000C007E, 0x00222FA1, 0x000C0002, 0x00103093, \
0x00380F90, 0x00080000, 0x00103090, 0x00380F90, \
0x00000000, 0x00000000, 0x00000000, 0x00000000, \
0x0010009C, 0x00244FAD, 0x00010004, 0x00041000, \
0x003A047E, 0x00044010, 0x00380819, 0x00000000, \
0x00100099, 0x00206FFD, 0x0010009A, 0x0020AFFD, \
0x0010009C, 0x00244FC8, 0x00130824, 0x000C0001, \
0x00101213, 0x00260FF7, 0x00041000, 0x00010004, \
0x00130826, 0x000C0006, 0x00220700, 0x0013C926, \
0x00101313, 0x00380700, 0x00000000, 0x00000000, \
0x00000000, 0x00000000, 0x00000000, 0x00000000, \
0x00080600, 0x00101B10, 0x00050004, 0x00100826, \
0x00101210, 0x00380FB6, 0x00000000, 0x00000000, \
0x002115A9, 0x00100099, 0x002065A7, 0x0010009A, \
0x0020A5A7, 0x0010009C, 0x002445A7, 0x00130836, \
0x000C0000, 0x00220FE4, 0x000C0001, 0x00101B13, \
0x00229F8E, 0x00210F8E, 0x00226F8E, 0x00216F8E, \
0x0022FF8E, 0x00215F8E, 0x00214F8E, 0x003805A3, \
0x00010004, 0x00041000, 0x00278FE9, 0x00040800, \
0x00018100, 0x003A047E, 0x00130826, 0x000C0001, \
0x002205A7, 0x00101313, 0x003805A7, 0x00000000, \
0x00000000, 0x00000000, 0x00000000, 0x00000000, \
0x00000000, 0x00000000, 0x00000000, 0x00130831, \
0x0010090B, 0x00124813, 0x000CFF80, 0x00260703, \
0x00041000, 0x00010004, 0x00380700 \
}
/********************************************************/
/* Micro code for the 8086:1229 Rev F/10 */
/********************************************************/
/* Parameter values for the D102 E-step */
#define D102_E_CPUSAVER_TIMER_DWORD 42
#define D102_E_CPUSAVER_BUNDLE_DWORD 54
#define D102_E_CPUSAVER_MIN_SIZE_DWORD 46
#define D102_E_RCVBUNDLE_UCODE \
{\
0x007D028F, 0x0E4204F9, 0x14ED0C85, 0x14FA14E9, 0x0EF70E36, 0x1FFF1FFF, \
0x00E014B9, 0x00000000, 0x00000000, 0x00000000, \
0x00E014BD, 0x00000000, 0x00000000, 0x00000000, \
0x00E014D5, 0x00000000, 0x00000000, 0x00000000, \
0x00000000, 0x00000000, 0x00000000, 0x00000000, \
0x00E014C1, 0x00000000, 0x00000000, 0x00000000, \
0x00000000, 0x00000000, 0x00000000, 0x00000000, \
0x00000000, 0x00000000, 0x00000000, 0x00000000, \
0x00000000, 0x00000000, 0x00000000, 0x00000000, \
0x00E014C8, 0x00000000, 0x00000000, 0x00000000, \
0x00200600, 0x00E014EE, 0x00000000, 0x00000000, \
0x0030FF80, 0x00940E46, 0x00038200, 0x00102000, \
0x00E00E43, 0x00000000, 0x00000000, 0x00000000, \
0x00300006, 0x00E014FB, 0x00000000, 0x00000000, \
0x00000000, 0x00000000, 0x00000000, 0x00000000, \
0x00000000, 0x00000000, 0x00000000, 0x00000000, \
0x00000000, 0x00000000, 0x00000000, 0x00000000, \
0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000, \
0x00906EFD, 0x00900EFD, 0x00E00EF8, 0x00000000, \
0x00000000, 0x00000000, 0x00000000, 0x00000000, \
0x00000000, 0x00000000, 0x00000000, 0x00000000, \
0x00000000, 0x00000000, 0x00000000, 0x00000000, \
0x00000000, 0x00000000, 0x00000000, 0x00000000, \
0x00000000, 0x00000000, 0x00000000, 0x00000000, \
0x00000000, 0x00000000, 0x00000000, 0x00000000, \
0x00000000, 0x00000000, 0x00000000, 0x00000000, \
0x00000000, 0x00000000, 0x00000000, 0x00000000, \
0x00000000, 0x00000000, 0x00000000, 0x00000000, \
0x00000000, 0x00000000, 0x00000000, 0x00000000, \
0x00000000, 0x00000000, 0x00000000, 0x00000000, \
0x00000000, 0x00000000, 0x00000000, 0x00000000, \
0x00000000, 0x00000000, 0x00000000, 0x00000000, \
0x00000000, 0x00000000, 0x00000000, 0x00000000, \
}
static void e100_load_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb)
{
int i;
static const u32 ucode[UCODE_SIZE] = {
/* NFS packets are misinterpreted as TCO packets and
* incorrectly routed to the BMC over SMBus. This
* microcode patch checks the fragmented IP bit in the
* NFS/UDP header to distinguish between NFS and TCO. */
0x0EF70E36, 0x1FFF1FFF, 0x1FFF1FFF, 0x1FFF1FFF, 0x1FFF1FFF,
0x1FFF1FFF, 0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000,
0x00906EFD, 0x00900EFD, 0x00E00EF8,
};
/* *INDENT-OFF* */
static struct {
u32 ucode[UCODE_SIZE + 1];
u8 mac;
u8 timer_dword;
u8 bundle_dword;
u8 min_size_dword;
} ucode_opts[] = {
{ D101M_B_RCVBUNDLE_UCODE,
mac_82559_D101M,
D101M_CPUSAVER_TIMER_DWORD,
D101M_CPUSAVER_BUNDLE_DWORD,
D101M_CPUSAVER_MIN_SIZE_DWORD },
{ D101S_RCVBUNDLE_UCODE,
mac_82559_D101S,
D101S_CPUSAVER_TIMER_DWORD,
D101S_CPUSAVER_BUNDLE_DWORD,
D101S_CPUSAVER_MIN_SIZE_DWORD },
{ D102_E_RCVBUNDLE_UCODE,
mac_82551_F,
D102_E_CPUSAVER_TIMER_DWORD,
D102_E_CPUSAVER_BUNDLE_DWORD,
D102_E_CPUSAVER_MIN_SIZE_DWORD },
{ D102_E_RCVBUNDLE_UCODE,
mac_82551_10,
D102_E_CPUSAVER_TIMER_DWORD,
D102_E_CPUSAVER_BUNDLE_DWORD,
D102_E_CPUSAVER_MIN_SIZE_DWORD },
{ {0}, 0, 0, 0, 0}
}, *opts;
/* *INDENT-ON* */
if(nic->mac == mac_82551_F || nic->mac == mac_82551_10) {
for(i = 0; i < UCODE_SIZE; i++)
/*************************************************************************
* CPUSaver parameters
*
* All CPUSaver parameters are 16-bit literals that are part of a
* "move immediate value" instruction. By changing the value of
* the literal in the instruction before the code is loaded, the
* driver can change the algorithm.
*
* INTDELAY - This loads the dead-man timer with its inital value.
* When this timer expires the interrupt is asserted, and the
* timer is reset each time a new packet is received. (see
* BUNDLEMAX below to set the limit on number of chained packets)
* The current default is 0x600 or 1536. Experiments show that
* the value should probably stay within the 0x200 - 0x1000.
*
* BUNDLEMAX -
* This sets the maximum number of frames that will be bundled. In
* some situations, such as the TCP windowing algorithm, it may be
* better to limit the growth of the bundle size than let it go as
* high as it can, because that could cause too much added latency.
* The default is six, because this is the number of packets in the
* default TCP window size. A value of 1 would make CPUSaver indicate
* an interrupt for every frame received. If you do not want to put
* a limit on the bundle size, set this value to xFFFF.
*
* BUNDLESMALL -
* This contains a bit-mask describing the minimum size frame that
* will be bundled. The default masks the lower 7 bits, which means
* that any frame less than 128 bytes in length will not be bundled,
* but will instead immediately generate an interrupt. This does
* not affect the current bundle in any way. Any frame that is 128
* bytes or large will be bundled normally. This feature is meant
* to provide immediate indication of ACK frames in a TCP environment.
* Customers were seeing poor performance when a machine with CPUSaver
* enabled was sending but not receiving. The delay introduced when
* the ACKs were received was enough to reduce total throughput, because
* the sender would sit idle until the ACK was finally seen.
*
* The current default is 0xFF80, which masks out the lower 7 bits.
* This means that any frame which is x7F (127) bytes or smaller
* will cause an immediate interrupt. Because this value must be a
* bit mask, there are only a few valid values that can be used. To
* turn this feature off, the driver can write the value xFFFF to the
* lower word of this instruction (in the same way that the other
* parameters are used). Likewise, a value of 0xF800 (2047) would
* cause an interrupt to be generated for every frame, because all
* standard Ethernet frames are <= 2047 bytes in length.
*************************************************************************/
/* if you wish to disable the ucode functionality, while maintaining the
* workarounds it provides, set the following defines to:
* BUNDLESMALL 0
* BUNDLEMAX 1
* INTDELAY 1
*/
#define BUNDLESMALL 1
#define BUNDLEMAX (u16)6
#define INTDELAY (u16)1536 /* 0x600 */
/* do not load u-code for ICH devices */
if (nic->flags & ich)
goto noloaducode;
/* Search for ucode match against h/w rev_id */
for (opts = ucode_opts; opts->mac; opts++) {
int i;
u32 *ucode = opts->ucode;
if (nic->mac != opts->mac)
continue;
/* Insert user-tunable settings */
ucode[opts->timer_dword] &= 0xFFFF0000;
ucode[opts->timer_dword] |= INTDELAY;
ucode[opts->bundle_dword] &= 0xFFFF0000;
ucode[opts->bundle_dword] |= BUNDLEMAX;
ucode[opts->min_size_dword] &= 0xFFFF0000;
ucode[opts->min_size_dword] |= (BUNDLESMALL) ? 0xFFFF : 0xFF80;
for (i = 0; i < UCODE_SIZE; i++)
cb->u.ucode[i] = cpu_to_le32(ucode[i]);
cb->command = cpu_to_le16(cb_ucode);
} else
cb->command = cpu_to_le16(cb_nop);
return;
}
noloaducode:
cb->command = cpu_to_le16(cb_nop);
}
static void e100_setup_iaaddr(struct nic *nic, struct cb *cb,

2
drivers/net/fec_8xx/Kconfig
View File

@ -1,6 +1,6 @@
config FEC_8XX
tristate "Motorola 8xx FEC driver"
depends on NET_ETHERNET && FEC
depends on NET_ETHERNET && 8xx
select MII
config FEC_8XX_GENERIC_PHY

2
drivers/net/ioc3-eth.c
View File

@ -1360,7 +1360,7 @@ static struct pci_driver ioc3_driver = {
static int __init ioc3_init_module(void)
{
return pci_module_init(&ioc3_driver);
return pci_register_driver(&ioc3_driver);
}
static void __exit ioc3_cleanup_module(void)

6
drivers/net/r8169.c
View File

@ -1346,10 +1346,8 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out,
} else {
if (netif_msg_probe(tp)) {
printk(KERN_ERR PFX
"Cannot find PowerManagement capability. "
"Aborting.\n");
"PowerManagement capability not found.\n");
}
goto err_out_mwi;
}
/* make sure PCI base addr 1 is MMIO */
@ -2516,7 +2514,7 @@ rtl8169_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
} while (boguscnt > 0);
if (boguscnt <= 0) {
if (net_ratelimit() && netif_msg_intr(tp)) {
if (netif_msg_intr(tp) && net_ratelimit() ) {
printk(KERN_WARNING
"%s: Too much work at interrupt!\n", dev->name);
}

36
drivers/net/saa9730.h
View File

@ -1,6 +1,7 @@
/*
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
* Copyright (C) 2000, 2005 MIPS Technologies, Inc. All rights reserved.
* Authors: Carsten Langgaard <carstenl@mips.com>
* Maciej W. Rozycki <macro@mips.com>
*
* ########################################################################
*
@ -265,6 +266,7 @@
/* The SAA9730 (LAN) controller register map, as seen via the PCI-bus. */
#define SAA9730_LAN_REGS_ADDR 0x20400
#define SAA9730_LAN_REGS_SIZE 0x00400
struct lan_saa9730_regmap {
volatile unsigned int TxBuffA; /* 0x20400 */
@ -309,6 +311,7 @@ typedef volatile struct lan_saa9730_regmap t_lan_saa9730_regmap;
/* The SAA9730 (EVM) controller register map, as seen via the PCI-bus. */
#define SAA9730_EVM_REGS_ADDR 0x02000
#define SAA9730_EVM_REGS_SIZE 0x00400
struct evm_saa9730_regmap {
volatile unsigned int InterruptStatus1; /* 0x2000 */
@ -329,16 +332,32 @@ typedef volatile struct evm_saa9730_regmap t_evm_saa9730_regmap;
struct lan_saa9730_private {
/*
* Rx/Tx packet buffers.
* The Rx and Tx packets must be PACKET_SIZE aligned.
*/
void *buffer_start;
unsigned int buffer_size;
/*
* DMA address of beginning of this object, returned
* by pci_alloc_consistent().
*/
dma_addr_t dma_addr;
/* Pointer to the associated pci device structure */
struct pci_dev *pci_dev;
/* Pointer for the SAA9730 LAN controller register set. */
t_lan_saa9730_regmap *lan_saa9730_regs;
/* Pointer to the SAA9730 EVM register. */
t_evm_saa9730_regmap *evm_saa9730_regs;
/* TRUE if the next buffer to write is RxBuffA, FALSE if RxBuffB. */
unsigned char NextRcvToUseIsA;
/* Rcv buffer Index. */
unsigned char NextRcvPacketIndex;
/* Next buffer index. */
unsigned char NextRcvBufferIndex;
/* Index of next packet to use in that buffer. */
unsigned char NextTxmPacketIndex;
@ -353,13 +372,8 @@ struct lan_saa9730_private {
unsigned char DmaRcvPackets;
unsigned char DmaTxmPackets;
unsigned char RcvAIndex; /* index into RcvBufferSpace[] for Blk A */
unsigned char RcvBIndex; /* index into RcvBufferSpace[] for Blk B */
unsigned int
TxmBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_TXM_Q_SIZE];
unsigned int
RcvBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_RCV_Q_SIZE];
void *TxmBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_TXM_Q_SIZE];
void *RcvBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_RCV_Q_SIZE];
unsigned int TxBufferFree[LAN_SAA9730_BUFFERS];
unsigned char PhysicalAddress[LAN_SAA9730_CAM_ENTRIES][6];

17
drivers/net/smc91x.c
View File

@ -154,6 +154,12 @@ MODULE_LICENSE("GPL");
*/
#define MEMORY_WAIT_TIME 16
/*
* The maximum number of processing loops allowed for each call to the
* IRQ handler.
*/
#define MAX_IRQ_LOOPS 8
/*
* This selects whether TX packets are sent one by one to the SMC91x internal
* memory and throttled until transmission completes. This may prevent
@ -684,7 +690,6 @@ static void smc_hardware_send_pkt(unsigned long data)
/* queue the packet for TX */
SMC_SET_MMU_CMD(MC_ENQUEUE);
SMC_ACK_INT(IM_TX_EMPTY_INT);
smc_special_unlock(&lp->lock);
dev->trans_start = jiffies;
@ -1207,6 +1212,7 @@ static void smc_phy_configure(void *data)
smc_phy_check_media(dev, 1);
smc_phy_configure_exit:
SMC_SELECT_BANK(2);
spin_unlock_irq(&lp->lock);
lp->work_pending = 0;
}
@ -1305,7 +1311,7 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
SMC_SET_INT_MASK(0);
/* set a timeout value, so I don't stay here forever */
timeout = 8;
timeout = MAX_IRQ_LOOPS;
do {
status = SMC_GET_INT();
@ -1372,10 +1378,13 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
/* restore register states */
SMC_SET_PTR(saved_pointer);
SMC_SET_INT_MASK(mask);
spin_unlock(&lp->lock);
DBG(3, "%s: Interrupt done (%d loops)\n", dev->name, 8-timeout);
if (timeout == MAX_IRQ_LOOPS)
PRINTK("%s: spurious interrupt (mask = 0x%02x)\n",
dev->name, mask);
DBG(3, "%s: Interrupt done (%d loops)\n",
dev->name, MAX_IRQ_LOOPS - timeout);
/*
* We return IRQ_HANDLED unconditionally here even if there was

6
drivers/net/wan/hdlc_cisco.c
View File

@ -192,7 +192,9 @@ static int cisco_rx(struct sk_buff *skb)
"uptime %ud%uh%um%us)\n",
dev->name, days, hrs,
min, sec);
#if 0
netif_carrier_on(dev);
#endif
hdlc->state.cisco.up = 1;
}
}
@ -225,7 +227,9 @@ static void cisco_timer(unsigned long arg)
hdlc->state.cisco.settings.timeout * HZ)) {
hdlc->state.cisco.up = 0;
printk(KERN_INFO "%s: Link down\n", dev->name);
#if 0
netif_carrier_off(dev);
#endif
}
cisco_keepalive_send(dev, CISCO_KEEPALIVE_REQ,
@ -261,8 +265,10 @@ static void cisco_stop(struct net_device *dev)
{
hdlc_device *hdlc = dev_to_hdlc(dev);
del_timer_sync(&hdlc->state.cisco.timer);
#if 0
if (netif_carrier_ok(dev))
netif_carrier_off(dev);
#endif
hdlc->state.cisco.up = 0;
hdlc->state.cisco.request_sent = 0;
}

4
drivers/net/wan/hdlc_fr.c
View File

@ -545,8 +545,10 @@ static void fr_set_link_state(int reliable, struct net_device *dev)
hdlc->state.fr.reliable = reliable;
if (reliable) {
#if 0
if (!netif_carrier_ok(dev))
netif_carrier_on(dev);
#endif
hdlc->state.fr.n391cnt = 0; /* Request full status */
hdlc->state.fr.dce_changed = 1;
@ -560,8 +562,10 @@ static void fr_set_link_state(int reliable, struct net_device *dev)
}
}
} else {
#if 0
if (netif_carrier_ok(dev))
netif_carrier_off(dev);
#endif
while (pvc) { /* Deactivate all PVCs */
pvc_carrier(0, pvc);

6
drivers/net/wan/hdlc_generic.c
View File

@ -79,11 +79,13 @@ static void __hdlc_set_carrier_on(struct net_device *dev)
hdlc_device *hdlc = dev_to_hdlc(dev);
if (hdlc->proto.start)
return hdlc->proto.start(dev);
#if 0
#ifdef DEBUG_LINK
if (netif_carrier_ok(dev))
printk(KERN_ERR "hdlc_set_carrier_on(): already on\n");
#endif
netif_carrier_on(dev);
#endif
}
@ -94,11 +96,13 @@ static void __hdlc_set_carrier_off(struct net_device *dev)
if (hdlc->proto.stop)
return hdlc->proto.stop(dev);
#if 0
#ifdef DEBUG_LINK
if (!netif_carrier_ok(dev))
printk(KERN_ERR "hdlc_set_carrier_off(): already off\n");
#endif
netif_carrier_off(dev);
#endif
}
@ -294,8 +298,10 @@ int register_hdlc_device(struct net_device *dev)
if (result != 0)
return -EIO;
#if 0
if (netif_carrier_ok(dev))
netif_carrier_off(dev); /* no carrier until DCD goes up */
#endif
return 0;
}

6
drivers/net/wireless/hermes.c
View File

@ -398,7 +398,7 @@ static int hermes_bap_seek(hermes_t *hw, int bap, u16 id, u16 offset)
*
* Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
*/
int hermes_bap_pread(hermes_t *hw, int bap, void *buf, unsigned len,
int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len,
u16 id, u16 offset)
{
int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
@ -424,7 +424,7 @@ int hermes_bap_pread(hermes_t *hw, int bap, void *buf, unsigned len,
*
* Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
*/
int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, unsigned len,
int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len,
u16 id, u16 offset)
{
int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
@ -450,7 +450,7 @@ int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, unsigned len,
*
* Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
*/
int hermes_bap_pwrite_pad(hermes_t *hw, int bap, const void *buf, unsigned data_len, unsigned len,
int hermes_bap_pwrite_pad(hermes_t *hw, int bap, const void *buf, unsigned data_len, int len,
u16 id, u16 offset)
{
int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;

6
drivers/net/wireless/hermes.h
View File

@ -372,12 +372,12 @@ int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0,
struct hermes_response *resp);
int hermes_allocate(hermes_t *hw, u16 size, u16 *fid);
int hermes_bap_pread(hermes_t *hw, int bap, void *buf, unsigned len,
int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len,
u16 id, u16 offset);
int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, unsigned len,
int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len,
u16 id, u16 offset);
int hermes_bap_pwrite_pad(hermes_t *hw, int bap, const void *buf,
unsigned data_len, unsigned len, u16 id, u16 offset);
unsigned data_len, int len, u16 id, u16 offset);
int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned buflen,
u16 *length, void *buf);
int hermes_write_ltv(hermes_t *hw, int bap, u16 rid,

11
drivers/net/wireless/i82593.h
View File

@ -7,11 +7,16 @@
*
* Copyright 1994, Anders Klemets <klemets@it.kth.se>
*
* This software may be freely distributed for noncommercial purposes
* as long as this notice is retained.
*
* HISTORY
* i82593.h,v
* Revision 1.4 2005/11/4 09:15:00 baroniunas
* Modified copyright with permission of author as follows:
*
* "If I82539.H is the only file with my copyright statement
* that is included in the Source Forge project, then you have
* my approval to change the copyright statement to be a GPL
* license, in the way you proposed on October 10."
*
* Revision 1.1 1996/07/17 15:23:12 root
* Initial revision
*

29
drivers/net/wireless/ipw2100.c
View File

@ -6344,7 +6344,8 @@ static struct net_device *ipw2100_alloc_device(struct pci_dev *pci_dev,
dev->ethtool_ops = &ipw2100_ethtool_ops;
dev->tx_timeout = ipw2100_tx_timeout;
dev->wireless_handlers = &ipw2100_wx_handler_def;
dev->get_wireless_stats = ipw2100_wx_wireless_stats;
priv->wireless_data.ieee80211 = priv->ieee;
dev->wireless_data = &priv->wireless_data;
dev->set_mac_address = ipw2100_set_address;
dev->watchdog_timeo = 3 * HZ;
dev->irq = 0;
@ -7178,6 +7179,11 @@ static int ipw2100_wx_get_range(struct net_device *dev,
}
range->num_frequency = val;
/* Event capability (kernel + driver) */
range->event_capa[0] = (IW_EVENT_CAPA_K_0 |
IW_EVENT_CAPA_MASK(SIOCGIWAP));
range->event_capa[1] = IW_EVENT_CAPA_K_1;
IPW_DEBUG_WX("GET Range\n");
return 0;
@ -8446,16 +8452,6 @@ static iw_handler ipw2100_private_handler[] = {
#endif /* CONFIG_IPW2100_MONITOR */
};
static struct iw_handler_def ipw2100_wx_handler_def = {
.standard = ipw2100_wx_handlers,
.num_standard = sizeof(ipw2100_wx_handlers) / sizeof(iw_handler),
.num_private = sizeof(ipw2100_private_handler) / sizeof(iw_handler),
.num_private_args = sizeof(ipw2100_private_args) /
sizeof(struct iw_priv_args),
.private = (iw_handler *) ipw2100_private_handler,
.private_args = (struct iw_priv_args *)ipw2100_private_args,
};
/*
* Get wireless statistics.
* Called by /proc/net/wireless
@ -8597,6 +8593,17 @@ static struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device *dev)
return (struct iw_statistics *)NULL;
}
static struct iw_handler_def ipw2100_wx_handler_def = {
.standard = ipw2100_wx_handlers,
.num_standard = sizeof(ipw2100_wx_handlers) / sizeof(iw_handler),
.num_private = sizeof(ipw2100_private_handler) / sizeof(iw_handler),
.num_private_args = sizeof(ipw2100_private_args) /
sizeof(struct iw_priv_args),
.private = (iw_handler *) ipw2100_private_handler,
.private_args = (struct iw_priv_args *)ipw2100_private_args,
.get_wireless_stats = ipw2100_wx_wireless_stats,
};
static void ipw2100_wx_event_work(struct ipw2100_priv *priv)
{
union iwreq_data wrqu;

2
drivers/net/wireless/ipw2100.h
View File

@ -571,6 +571,8 @@ struct ipw2100_priv {
struct net_device *net_dev;
struct iw_statistics wstats;
struct iw_public_data wireless_data;
struct tasklet_struct irq_tasklet;
struct workqueue_struct *workqueue;

4
drivers/net/wireless/prism54/isl_38xx.c
View File

@ -164,12 +164,12 @@ isl38xx_trigger_device(int asleep, void __iomem *device_base)
/* assert the Wakeup interrupt in the Device Interrupt Register */
isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_WAKEUP,
ISL38XX_DEV_INT_REG);
#if VERBOSE > SHOW_ERROR_MESSAGES
udelay(ISL38XX_WRITEIO_DELAY);
/* perform another read on the Device Status Register */
reg = readl(device_base + ISL38XX_CTRL_STAT_REG);
#if VERBOSE > SHOW_ERROR_MESSAGES
do_gettimeofday(&current_time);
DEBUG(SHOW_TRACING, "%08li.%08li Device register read %08x\n",
current_time.tv_sec, (long)current_time.tv_usec, reg);

4
drivers/s390/char/raw3270.c
View File

@ -1179,12 +1179,12 @@ raw3270_create_attributes(struct raw3270 *rp)
//FIXME: check return code
sysfs_create_group(&rp->cdev->dev.kobj, &raw3270_attr_group);
rp->clttydev =
class_device_create(class3270,
class_device_create(class3270, NULL,
MKDEV(IBM_TTY3270_MAJOR, rp->minor),
&rp->cdev->dev, "tty%s",
rp->cdev->dev.bus_id);
rp->cltubdev =
class_device_create(class3270,
class_device_create(class3270, NULL,
MKDEV(IBM_FS3270_MAJOR, rp->minor),
&rp->cdev->dev, "tub%s",
rp->cdev->dev.bus_id);

3
drivers/scsi/sata_mv.c
View File

@ -2,6 +2,7 @@
* sata_mv.c - Marvell SATA support
*
* Copyright 2005: EMC Corporation, all rights reserved.
* Copyright 2005 Red Hat, Inc. All rights reserved.
*
* Please ALWAYS copy linux-ide@vger.kernel.org on emails.
*
@ -36,7 +37,7 @@
#include <asm/io.h>
#define DRV_NAME "sata_mv"
#define DRV_VERSION "0.25"
#define DRV_VERSION "0.5"
enum {
/* BAR's are enumerated in terms of pci_resource_start() terms */

197
drivers/scsi/sata_sil24.c
View File

@ -5,17 +5,6 @@
*
* Based on preview driver from Silicon Image.
*
* NOTE: No NCQ/ATAPI support yet. The preview driver didn't support
* NCQ nor ATAPI, and, unfortunately, I couldn't find out how to make
* those work. Enabling those shouldn't be difficult. Basic
* structure is all there (in libata-dev tree). If you have any
* information about this hardware, please contact me or linux-ide.
* Info is needed on...
*
* - How to issue tagged commands and turn on sactive on issue accordingly.
* - Where to put an ATAPI command and how to tell the device to send it.
* - How to enable/use 64bit.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
@ -42,7 +31,7 @@
#include <asm/io.h>
#define DRV_NAME "sata_sil24"
#define DRV_VERSION "0.22" /* Silicon Image's preview driver was 0.10 */
#define DRV_VERSION "0.23"
/*
* Port request block (PRB) 32 bytes
@ -221,11 +210,22 @@ enum {
IRQ_STAT_4PORTS = 0xf,
};
struct sil24_cmd_block {
struct sil24_ata_block {
struct sil24_prb prb;
struct sil24_sge sge[LIBATA_MAX_PRD];
};
struct sil24_atapi_block {
struct sil24_prb prb;
u8 cdb[16];
struct sil24_sge sge[LIBATA_MAX_PRD - 1];
};
union sil24_cmd_block {
struct sil24_ata_block ata;
struct sil24_atapi_block atapi;
};
/*
* ap->private_data
*
@ -233,7 +233,7 @@ struct sil24_cmd_block {
* here from the previous interrupt.
*/
struct sil24_port_priv {
struct sil24_cmd_block *cmd_block; /* 32 cmd blocks */
union sil24_cmd_block *cmd_block; /* 32 cmd blocks */
dma_addr_t cmd_block_dma; /* DMA base addr for them */
struct ata_taskfile tf; /* Cached taskfile registers */
};
@ -244,6 +244,7 @@ struct sil24_host_priv {
void __iomem *port_base; /* port registers (4 * 8192 bytes @BAR2) */
};
static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev);
static u8 sil24_check_status(struct ata_port *ap);
static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg);
static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val);
@ -297,6 +298,8 @@ static struct scsi_host_template sil24_sht = {
static const struct ata_port_operations sil24_ops = {
.port_disable = ata_port_disable,
.dev_config = sil24_dev_config,
.check_status = sil24_check_status,
.check_altstatus = sil24_check_status,
.dev_select = ata_noop_dev_select,
@ -333,7 +336,7 @@ static struct ata_port_info sil24_port_info[] = {
{
.sht = &sil24_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
ATA_FLAG_SRST | ATA_FLAG_MMIO |
ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(4),
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
@ -344,7 +347,7 @@ static struct ata_port_info sil24_port_info[] = {
{
.sht = &sil24_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
ATA_FLAG_SRST | ATA_FLAG_MMIO |
ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(2),
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
@ -355,7 +358,7 @@ static struct ata_port_info sil24_port_info[] = {
{
.sht = &sil24_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
ATA_FLAG_SRST | ATA_FLAG_MMIO |
ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(1),
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
@ -364,6 +367,16 @@ static struct ata_port_info sil24_port_info[] = {
},
};
static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev)
{
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
if (ap->cdb_len == 16)
writel(PORT_CS_CDB16, port + PORT_CTRL_STAT);
else
writel(PORT_CS_CDB16, port + PORT_CTRL_CLR);
}
static inline void sil24_update_tf(struct ata_port *ap)
{
struct sil24_port_priv *pp = ap->private_data;
@ -415,22 +428,73 @@ static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
*tf = pp->tf;
}
static int sil24_issue_SRST(struct ata_port *ap)
{
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
struct sil24_port_priv *pp = ap->private_data;
struct sil24_prb *prb = &pp->cmd_block[0].ata.prb;
dma_addr_t paddr = pp->cmd_block_dma;
u32 irq_enable, irq_stat;
int cnt;
/* temporarily turn off IRQs during SRST */
irq_enable = readl(port + PORT_IRQ_ENABLE_SET);
writel(irq_enable, port + PORT_IRQ_ENABLE_CLR);
/*
* XXX: Not sure whether the following sleep is needed or not.
* The original driver had it. So....
*/
msleep(10);
prb->ctrl = PRB_CTRL_SRST;
prb->fis[1] = 0; /* no PM yet */
writel((u32)paddr, port + PORT_CMD_ACTIVATE);
for (cnt = 0; cnt < 100; cnt++) {
irq_stat = readl(port + PORT_IRQ_STAT);
writel(irq_stat, port + PORT_IRQ_STAT); /* clear irq */
irq_stat >>= PORT_IRQ_RAW_SHIFT;
if (irq_stat & (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR))
break;
msleep(1);
}
/* restore IRQs */
writel(irq_enable, port + PORT_IRQ_ENABLE_SET);
if (!(irq_stat & PORT_IRQ_COMPLETE))
return -1;
/* update TF */
sil24_update_tf(ap);
return 0;
}
static void sil24_phy_reset(struct ata_port *ap)
{
struct sil24_port_priv *pp = ap->private_data;
__sata_phy_reset(ap);
/*
* No ATAPI yet. Just unconditionally indicate ATA device.
* If ATAPI device is attached, it will fail ATA_CMD_ID_ATA
* and libata core will ignore the device.
*/
if (!(ap->flags & ATA_FLAG_PORT_DISABLED))
ap->device[0].class = ATA_DEV_ATA;
if (ap->flags & ATA_FLAG_PORT_DISABLED)
return;
if (sil24_issue_SRST(ap) < 0) {
printk(KERN_ERR DRV_NAME
" ata%u: SRST failed, disabling port\n", ap->id);
ap->ops->port_disable(ap);
return;
}
ap->device->class = ata_dev_classify(&pp->tf);
}
static inline void sil24_fill_sg(struct ata_queued_cmd *qc,
struct sil24_cmd_block *cb)
struct sil24_sge *sge)
{
struct sil24_sge *sge = cb->sge;
struct scatterlist *sg;
unsigned int idx = 0;
@ -451,23 +515,47 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct sil24_port_priv *pp = ap->private_data;
struct sil24_cmd_block *cb = pp->cmd_block + qc->tag;
struct sil24_prb *prb = &cb->prb;
union sil24_cmd_block *cb = pp->cmd_block + qc->tag;
struct sil24_prb *prb;
struct sil24_sge *sge;
switch (qc->tf.protocol) {
case ATA_PROT_PIO:
case ATA_PROT_DMA:
case ATA_PROT_NODATA:
prb = &cb->ata.prb;
sge = cb->ata.sge;
prb->ctrl = 0;
break;
case ATA_PROT_ATAPI:
case ATA_PROT_ATAPI_DMA:
case ATA_PROT_ATAPI_NODATA:
prb = &cb->atapi.prb;
sge = cb->atapi.sge;
memset(cb->atapi.cdb, 0, 32);
memcpy(cb->atapi.cdb, qc->cdb, ap->cdb_len);
if (qc->tf.protocol != ATA_PROT_ATAPI_NODATA) {
if (qc->tf.flags & ATA_TFLAG_WRITE)
prb->ctrl = PRB_CTRL_PACKET_WRITE;
else
prb->ctrl = PRB_CTRL_PACKET_READ;
} else
prb->ctrl = 0;
break;
default:
/* ATAPI isn't supported yet */
prb = NULL; /* shut up, gcc */
sge = NULL;
BUG();
}
ata_tf_to_fis(&qc->tf, prb->fis, 0);
if (qc->flags & ATA_QCFLAG_DMAMAP)
sil24_fill_sg(qc, cb);
sil24_fill_sg(qc, sge);
}
static int sil24_qc_issue(struct ata_queued_cmd *qc)
@ -486,6 +574,31 @@ static void sil24_irq_clear(struct ata_port *ap)
/* unused */
}
static int __sil24_restart_controller(void __iomem *port)
{
u32 tmp;
int cnt;
writel(PORT_CS_INIT, port + PORT_CTRL_STAT);
/* Max ~10ms */
for (cnt = 0; cnt < 10000; cnt++) {
tmp = readl(port + PORT_CTRL_STAT);
if (tmp & PORT_CS_RDY)
return 0;
udelay(1);
}
return -1;
}
static void sil24_restart_controller(struct ata_port *ap)
{
if (__sil24_restart_controller((void __iomem *)ap->ioaddr.cmd_addr))
printk(KERN_ERR DRV_NAME
" ata%u: failed to restart controller\n", ap->id);
}
static int __sil24_reset_controller(void __iomem *port)
{
int cnt;
@ -505,7 +618,11 @@ static int __sil24_reset_controller(void __iomem *port)
if (tmp & PORT_CS_DEV_RST)
return -1;
return 0;
if (tmp & PORT_CS_RDY)
return 0;
return __sil24_restart_controller(port);
}
static void sil24_reset_controller(struct ata_port *ap)
@ -567,9 +684,15 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat)
if (serror)
writel(serror, port + PORT_SERROR);
printk(KERN_ERR DRV_NAME " ata%u: error interrupt on port%d\n"
" stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n",
ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror);
/*
* Don't log ATAPI device errors. They're supposed to happen
* and any serious errors will be logged using sense data by
* the SCSI layer.
*/
if (ap->device[0].class != ATA_DEV_ATAPI || cmd_err > PORT_CERR_SDB)
printk("ata%u: error interrupt on port%d\n"
" stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n",
ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror);
if (cmd_err == PORT_CERR_DEV || cmd_err == PORT_CERR_SDB) {
/*
@ -577,6 +700,7 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat)
*/
sil24_update_tf(ap);
err_mask = ac_err_mask(pp->tf.command);
sil24_restart_controller(ap);
} else {
/*
* Other errors. libata currently doesn't have any
@ -584,12 +708,11 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat)
* ATA_ERR.
*/
err_mask = AC_ERR_OTHER;
sil24_reset_controller(ap);
}
if (qc)
ata_qc_complete(qc, err_mask);
sil24_reset_controller(ap);
}
static inline void sil24_host_intr(struct ata_port *ap)
@ -665,7 +788,7 @@ static int sil24_port_start(struct ata_port *ap)
{
struct device *dev = ap->host_set->dev;
struct sil24_port_priv *pp;
struct sil24_cmd_block *cb;
union sil24_cmd_block *cb;
size_t cb_size = sizeof(*cb);
dma_addr_t cb_dma;
int rc = -ENOMEM;

2
drivers/usb/host/ohci-ppc-soc.c
View File

@ -185,7 +185,7 @@ static int ohci_hcd_ppc_soc_drv_probe(struct platform_device *pdev)
static int ohci_hcd_ppc_soc_drv_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
struct usb_hcd *hcd = platform_get_drvdata(pdev);
usb_hcd_ppc_soc_remove(hcd, pdev);
return 0;

41
drivers/video/offb.c
View File

@ -26,6 +26,7 @@
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/pci.h>
#include <asm/io.h>
#include <asm/prom.h>
@ -325,8 +326,8 @@ static void __init offb_init_nodriver(struct device_node *dp)
int *pp, i;
unsigned int len;
int width = 640, height = 480, depth = 8, pitch;
unsigned *up;
unsigned long address;
unsigned int rsize, *up;
unsigned long address = 0;
if ((pp = (int *) get_property(dp, "depth", &len)) != NULL
&& len == sizeof(int))
@ -344,10 +345,40 @@ static void __init offb_init_nodriver(struct device_node *dp)
pitch = 0x1000;
} else
pitch = width;
if ((up = (unsigned *) get_property(dp, "address", &len)) != NULL
&& len == sizeof(unsigned))
rsize = (unsigned long)pitch * (unsigned long)height *
(unsigned long)(depth / 8);
/* Try to match device to a PCI device in order to get a properly
* translated address rather then trying to decode the open firmware
* stuff in various incorrect ways
*/
#ifdef CONFIG_PCI
/* First try to locate the PCI device if any */
{
struct pci_dev *pdev = NULL;
for_each_pci_dev(pdev) {
if (dp == pci_device_to_OF_node(pdev))
break;
}
if (pdev) {
for (i = 0; i < 6 && address == 0; i++) {
if ((pci_resource_flags(pdev, i) &
IORESOURCE_MEM) &&
(pci_resource_len(pdev, i) >= rsize))
address = pci_resource_start(pdev, i);
}
pci_dev_put(pdev);
}
}
#endif /* CONFIG_PCI */
if (address == 0 &&
(up = (unsigned *) get_property(dp, "address", &len)) != NULL &&
len == sizeof(unsigned))
address = (u_long) * up;
else {
if (address == 0) {
for (i = 0; i < dp->n_addrs; ++i)
if (dp->addrs[i].size >=
pitch * height * depth / 8)

36
fs/compat_ioctl.c
View File

@ -49,6 +49,8 @@
#include <linux/vt_kern.h>
#include <linux/fb.h>
#include <linux/ext2_fs.h>
#include <linux/ext3_jbd.h>
#include <linux/ext3_fs.h>
#include <linux/videodev.h>
#include <linux/netdevice.h>
#include <linux/raw.h>
@ -134,6 +136,15 @@
/* Aiee. Someone does not find a difference between int and long */
#define EXT2_IOC32_GETFLAGS _IOR('f', 1, int)
#define EXT2_IOC32_SETFLAGS _IOW('f', 2, int)
#define EXT3_IOC32_GETVERSION _IOR('f', 3, int)
#define EXT3_IOC32_SETVERSION _IOR('f', 4, int)
#define EXT3_IOC32_GETRSVSZ _IOR('f', 5, int)
#define EXT3_IOC32_SETRSVSZ _IOW('f', 6, int)
#define EXT3_IOC32_GROUP_EXTEND _IOW('f', 7, unsigned int)
#ifdef CONFIG_JBD_DEBUG
#define EXT3_IOC32_WAIT_FOR_READONLY _IOR('f', 99, int)
#endif
#define EXT2_IOC32_GETVERSION _IOR('v', 1, int)
#define EXT2_IOC32_SETVERSION _IOW('v', 2, int)
@ -180,6 +191,22 @@ static int do_ext2_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg)
return sys_ioctl(fd, cmd, (unsigned long)compat_ptr(arg));
}
static int do_ext3_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg)
{
/* These are just misnamed, they actually get/put from/to user an int */
switch (cmd) {
case EXT3_IOC32_GETVERSION: cmd = EXT3_IOC_GETVERSION; break;
case EXT3_IOC32_SETVERSION: cmd = EXT3_IOC_SETVERSION; break;
case EXT3_IOC32_GETRSVSZ: cmd = EXT3_IOC_GETRSVSZ; break;
case EXT3_IOC32_SETRSVSZ: cmd = EXT3_IOC_SETRSVSZ; break;
case EXT3_IOC32_GROUP_EXTEND: cmd = EXT3_IOC_GROUP_EXTEND; break;
#ifdef CONFIG_JBD_DEBUG
case EXT3_IOC32_WAIT_FOR_READONLY: cmd = EXT3_IOC_WAIT_FOR_READONLY; break;
#endif
}
return sys_ioctl(fd, cmd, (unsigned long)compat_ptr(arg));
}
struct video_tuner32 {
compat_int_t tuner;
char name[32];
@ -2981,6 +3008,15 @@ HANDLE_IOCTL(EXT2_IOC32_GETFLAGS, do_ext2_ioctl)
HANDLE_IOCTL(EXT2_IOC32_SETFLAGS, do_ext2_ioctl)
HANDLE_IOCTL(EXT2_IOC32_GETVERSION, do_ext2_ioctl)
HANDLE_IOCTL(EXT2_IOC32_SETVERSION, do_ext2_ioctl)
HANDLE_IOCTL(EXT3_IOC32_GETVERSION, do_ext3_ioctl)
HANDLE_IOCTL(EXT3_IOC32_SETVERSION, do_ext3_ioctl)
HANDLE_IOCTL(EXT3_IOC32_GETRSVSZ, do_ext3_ioctl)
HANDLE_IOCTL(EXT3_IOC32_SETRSVSZ, do_ext3_ioctl)
HANDLE_IOCTL(EXT3_IOC32_GROUP_EXTEND, do_ext3_ioctl)
COMPATIBLE_IOCTL(EXT3_IOC_GROUP_ADD)
#ifdef CONFIG_JBD_DEBUG
HANDLE_IOCTL(EXT3_IOC32_WAIT_FOR_READONLY, do_ext3_ioctl)
#endif
HANDLE_IOCTL(VIDIOCGTUNER32, do_video_ioctl)
HANDLE_IOCTL(VIDIOCSTUNER32, do_video_ioctl)
HANDLE_IOCTL(VIDIOCGWIN32, do_video_ioctl)

22
include/asm-powerpc/cputable.h
View File

@ -90,6 +90,7 @@ extern void do_cpu_ftr_fixups(unsigned long offset);
#define CPU_FTR_NEED_COHERENT ASM_CONST(0x0000000000020000)
#define CPU_FTR_NO_BTIC ASM_CONST(0x0000000000040000)
#define CPU_FTR_BIG_PHYS ASM_CONST(0x0000000000080000)
#define CPU_FTR_NODSISRALIGN ASM_CONST(0x0000000000100000)
#ifdef __powerpc64__
/* Add the 64b processor unique features in the top half of the word */
@ -97,7 +98,6 @@ extern void do_cpu_ftr_fixups(unsigned long offset);
#define CPU_FTR_16M_PAGE ASM_CONST(0x0000000200000000)
#define CPU_FTR_TLBIEL ASM_CONST(0x0000000400000000)
#define CPU_FTR_NOEXECUTE ASM_CONST(0x0000000800000000)
#define CPU_FTR_NODSISRALIGN ASM_CONST(0x0000001000000000)
#define CPU_FTR_IABR ASM_CONST(0x0000002000000000)
#define CPU_FTR_MMCRA ASM_CONST(0x0000004000000000)
#define CPU_FTR_CTRL ASM_CONST(0x0000008000000000)
@ -113,7 +113,6 @@ extern void do_cpu_ftr_fixups(unsigned long offset);
#define CPU_FTR_16M_PAGE ASM_CONST(0x0)
#define CPU_FTR_TLBIEL ASM_CONST(0x0)
#define CPU_FTR_NOEXECUTE ASM_CONST(0x0)
#define CPU_FTR_NODSISRALIGN ASM_CONST(0x0)
#define CPU_FTR_IABR ASM_CONST(0x0)
#define CPU_FTR_MMCRA ASM_CONST(0x0)
#define CPU_FTR_CTRL ASM_CONST(0x0)
@ -273,18 +272,21 @@ enum {
CPU_FTRS_POWER3_32 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE,
CPU_FTRS_POWER4_32 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE,
CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_NODSISRALIGN,
CPU_FTRS_970_32 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE |
CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_ALTIVEC_COMP |
CPU_FTR_MAYBE_CAN_NAP,
CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN,
CPU_FTRS_8XX = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB,
CPU_FTRS_40X = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB,
CPU_FTRS_44X = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB,
CPU_FTRS_E200 = CPU_FTR_USE_TB,
CPU_FTRS_E500 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB,
CPU_FTRS_40X = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
CPU_FTR_NODSISRALIGN,
CPU_FTRS_44X = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
CPU_FTR_NODSISRALIGN,
CPU_FTRS_E200 = CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN,
CPU_FTRS_E500 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
CPU_FTR_NODSISRALIGN,
CPU_FTRS_E500_2 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
CPU_FTR_BIG_PHYS,
CPU_FTRS_GENERIC_32 = CPU_FTR_COMMON,
CPU_FTR_BIG_PHYS | CPU_FTR_NODSISRALIGN,
CPU_FTRS_GENERIC_32 = CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN,
#ifdef __powerpc64__
CPU_FTRS_POWER3 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
CPU_FTR_HPTE_TABLE | CPU_FTR_IABR,

40
include/asm-powerpc/delay.h
View File

@ -13,43 +13,7 @@
* Anton Blanchard.
*/
extern unsigned long tb_ticks_per_usec;
#ifdef CONFIG_PPC64
/* define these here to prevent circular dependencies */
/* these instructions control the thread priority on multi-threaded cpus */
#define __HMT_low() asm volatile("or 1,1,1")
#define __HMT_medium() asm volatile("or 2,2,2")
#else
#define __HMT_low()
#define __HMT_medium()
#endif
#define __barrier() asm volatile("" ::: "memory")
static inline unsigned long __get_tb(void)
{
unsigned long rval;
asm volatile("mftb %0" : "=r" (rval));
return rval;
}
static inline void __delay(unsigned long loops)
{
unsigned long start = __get_tb();
while((__get_tb() - start) < loops)
__HMT_low();
__HMT_medium();
__barrier();
}
static inline void udelay(unsigned long usecs)
{
unsigned long loops = tb_ticks_per_usec * usecs;
__delay(loops);
}
extern void __delay(unsigned long loops);
extern void udelay(unsigned long usecs);
#endif /* _ASM_POWERPC_DELAY_H */

4
include/asm-powerpc/eeh.h
View File

@ -30,6 +30,8 @@ struct device_node;
#ifdef CONFIG_EEH
extern int eeh_subsystem_enabled;
/* Values for eeh_mode bits in device_node */
#define EEH_MODE_SUPPORTED (1<<0)
#define EEH_MODE_NOCHECK (1<<1)
@ -75,7 +77,7 @@ void eeh_remove_device(struct pci_dev *);
* If this macro yields TRUE, the caller relays to eeh_check_failure()
* which does further tests out of line.
*/
#define EEH_POSSIBLE_ERROR(val, type) ((val) == (type)~0)
#define EEH_POSSIBLE_ERROR(val, type) ((val) == (type)~0 && eeh_subsystem_enabled)
/*
* Reads from a device which has been isolated by EEH will return

4
include/asm-powerpc/page_64.h
View File

@ -86,7 +86,11 @@ static inline void copy_page(void *to, void *from)
extern u64 ppc64_pft_size;
/* Large pages size */
#ifdef CONFIG_HUGETLB_PAGE
extern unsigned int HPAGE_SHIFT;
#else
#define HPAGE_SHIFT PAGE_SHIFT
#endif
#define HPAGE_SIZE ((1UL) << HPAGE_SHIFT)
#define HPAGE_MASK (~(HPAGE_SIZE - 1))
#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT)

4
include/asm-powerpc/topology.h
View File

@ -41,6 +41,10 @@ static inline int node_to_first_cpu(int node)
.cache_hot_time = (10*1000000), \
.cache_nice_tries = 1, \
.per_cpu_gain = 100, \
.busy_idx = 3, \
.idle_idx = 1, \
.newidle_idx = 2, \
.wake_idx = 1, \
.flags = SD_LOAD_BALANCE \
| SD_BALANCE_EXEC \
| SD_BALANCE_NEWIDLE \

2
include/asm-ppc/cpm2.h
View File

@ -1091,5 +1091,7 @@ typedef struct im_idma {
#define CPM_IMMR_OFFSET 0x101a8
#endif
#define FCC_PSMR_RMII ((uint)0x00020000) /* Use RMII interface */
#endif /* __CPM2__ */
#endif /* __KERNEL__ */

2
include/net/ieee80211.h
View File

@ -1042,7 +1042,7 @@ static inline u8 *ieee80211_get_payload(struct ieee80211_hdr *hdr)
case IEEE80211_4ADDR_LEN:
return ((struct ieee80211_hdr_4addr *)hdr)->payload;
}
return NULL;
}
static inline int ieee80211_is_ofdm_rate(u8 rate)

30
kernel/rcutorture.c
View File

@ -80,6 +80,7 @@ struct rcu_torture {
struct rcu_head rtort_rcu;
int rtort_pipe_count;
struct list_head rtort_free;
int rtort_mbtest;
};
static int fullstop = 0; /* stop generating callbacks at test end. */
@ -96,6 +97,8 @@ static atomic_t rcu_torture_wcount[RCU_TORTURE_PIPE_LEN + 1];
atomic_t n_rcu_torture_alloc;
atomic_t n_rcu_torture_alloc_fail;
atomic_t n_rcu_torture_free;
atomic_t n_rcu_torture_mberror;
atomic_t n_rcu_torture_error;
/*
* Allocate an element from the rcu_tortures pool.
@ -145,9 +148,10 @@ rcu_torture_cb(struct rcu_head *p)
if (i > RCU_TORTURE_PIPE_LEN)
i = RCU_TORTURE_PIPE_LEN;
atomic_inc(&rcu_torture_wcount[i]);
if (++rp->rtort_pipe_count >= RCU_TORTURE_PIPE_LEN)
if (++rp->rtort_pipe_count >= RCU_TORTURE_PIPE_LEN) {
rp->rtort_mbtest = 0;
rcu_torture_free(rp);
else
} else
call_rcu(p, rcu_torture_cb);
}
@ -206,6 +210,7 @@ rcu_torture_writer(void *arg)
rp->rtort_pipe_count = 0;
udelay(rcu_random(&rand) & 0x3ff);
old_rp = rcu_torture_current;
rp->rtort_mbtest = 1;
rcu_assign_pointer(rcu_torture_current, rp);
smp_wmb();
if (old_rp != NULL) {
@ -252,6 +257,8 @@ rcu_torture_reader(void *arg)
schedule_timeout_interruptible(HZ);
continue;
}
if (p->rtort_mbtest == 0)
atomic_inc(&n_rcu_torture_mberror);
udelay(rcu_random(&rand) & 0x7f);
preempt_disable();
pipe_count = p->rtort_pipe_count;
@ -300,16 +307,22 @@ rcu_torture_printk(char *page)
}
cnt += sprintf(&page[cnt], "rcutorture: ");
cnt += sprintf(&page[cnt],
"rtc: %p ver: %ld tfle: %d rta: %d rtaf: %d rtf: %d",
"rtc: %p ver: %ld tfle: %d rta: %d rtaf: %d rtf: %d "
"rtmbe: %d",
rcu_torture_current,
rcu_torture_current_version,
list_empty(&rcu_torture_freelist),
atomic_read(&n_rcu_torture_alloc),
atomic_read(&n_rcu_torture_alloc_fail),
atomic_read(&n_rcu_torture_free));
atomic_read(&n_rcu_torture_free),
atomic_read(&n_rcu_torture_mberror));
if (atomic_read(&n_rcu_torture_mberror) != 0)
cnt += sprintf(&page[cnt], " !!!");
cnt += sprintf(&page[cnt], "\nrcutorture: ");
if (i > 1)
if (i > 1) {
cnt += sprintf(&page[cnt], "!!! ");
atomic_inc(&n_rcu_torture_error);
}
cnt += sprintf(&page[cnt], "Reader Pipe: ");
for (i = 0; i < RCU_TORTURE_PIPE_LEN + 1; i++)
cnt += sprintf(&page[cnt], " %ld", pipesummary[i]);
@ -400,7 +413,9 @@ rcu_torture_cleanup(void)
for (i = 0; i < RCU_TORTURE_PIPE_LEN; i++)
synchronize_rcu();
rcu_torture_stats_print(); /* -After- the stats thread is stopped! */
PRINTK_STRING("--- End of test");
printk(KERN_ALERT TORTURE_FLAG
"--- End of test: %s\n",
atomic_read(&n_rcu_torture_error) == 0 ? "SUCCESS" : "FAILURE");
}
static int
@ -425,6 +440,7 @@ rcu_torture_init(void)
INIT_LIST_HEAD(&rcu_torture_freelist);
for (i = 0; i < sizeof(rcu_tortures) / sizeof(rcu_tortures[0]); i++) {
rcu_tortures[i].rtort_mbtest = 0;
list_add_tail(&rcu_tortures[i].rtort_free,
&rcu_torture_freelist);
}
@ -436,6 +452,8 @@ rcu_torture_init(void)
atomic_set(&n_rcu_torture_alloc, 0);
atomic_set(&n_rcu_torture_alloc_fail, 0);
atomic_set(&n_rcu_torture_free, 0);
atomic_set(&n_rcu_torture_mberror, 0);
atomic_set(&n_rcu_torture_error, 0);
for (i = 0; i < RCU_TORTURE_PIPE_LEN + 1; i++)
atomic_set(&rcu_torture_wcount[i], 0);
for_each_cpu(cpu) {

1
mm/page-writeback.c
View File

@ -750,6 +750,7 @@ int clear_page_dirty_for_io(struct page *page)
}
return TestClearPageDirty(page);
}
EXPORT_SYMBOL(clear_page_dirty_for_io);
int test_clear_page_writeback(struct page *page)
{

4
net/ipv4/netfilter/ip_conntrack_ftp.c
View File

@ -29,9 +29,9 @@ static char *ftp_buffer;
static DEFINE_SPINLOCK(ip_ftp_lock);
#define MAX_PORTS 8
static short ports[MAX_PORTS];
static unsigned short ports[MAX_PORTS];
static int ports_c;
module_param_array(ports, short, &ports_c, 0400);
module_param_array(ports, ushort, &ports_c, 0400);
static int loose;
module_param(loose, int, 0600);

4
net/ipv4/netfilter/ip_conntrack_irc.c
View File

@ -34,7 +34,7 @@
#include <linux/moduleparam.h>
#define MAX_PORTS 8
static short ports[MAX_PORTS];
static unsigned short ports[MAX_PORTS];
static int ports_c;
static int max_dcc_channels = 8;
static unsigned int dcc_timeout = 300;
@ -52,7 +52,7 @@ EXPORT_SYMBOL_GPL(ip_nat_irc_hook);
MODULE_AUTHOR("Harald Welte <laforge@netfilter.org>");
MODULE_DESCRIPTION("IRC (DCC) connection tracking helper");
MODULE_LICENSE("GPL");
module_param_array(ports, short, &ports_c, 0400);
module_param_array(ports, ushort, &ports_c, 0400);
MODULE_PARM_DESC(ports, "port numbers of IRC servers");
module_param(max_dcc_channels, int, 0400);
MODULE_PARM_DESC(max_dcc_channels, "max number of expected DCC channels per IRC session");

4
net/ipv4/netfilter/ip_conntrack_tftp.c
View File

@ -26,9 +26,9 @@ MODULE_DESCRIPTION("tftp connection tracking helper");
MODULE_LICENSE("GPL");
#define MAX_PORTS 8
static short ports[MAX_PORTS];
static unsigned short ports[MAX_PORTS];
static int ports_c;
module_param_array(ports, short, &ports_c, 0400);
module_param_array(ports, ushort, &ports_c, 0400);
MODULE_PARM_DESC(ports, "port numbers of tftp servers");
#if 0

2
net/ipv4/tcp_highspeed.c
View File

@ -111,7 +111,7 @@ static void hstcp_init(struct sock *sk)
}
static void hstcp_cong_avoid(struct sock *sk, u32 adk, u32 rtt,
u32 in_flight, u32 pkts_acked)
u32 in_flight, int data_acked)
{
struct tcp_sock *tp = tcp_sk(sk);
struct hstcp *ca = inet_csk_ca(sk);

2
net/ipv6/route.c
View File

@ -1732,7 +1732,7 @@ int inet6_dump_fib(struct sk_buff *skb, struct netlink_callback *cb)
/*
* 2. allocate and initialize walker.
*/
w = kmalloc(sizeof(*w), GFP_KERNEL);
w = kmalloc(sizeof(*w), GFP_ATOMIC);
if (w == NULL)
return -ENOMEM;
RT6_TRACE("dump<%p", w);

8
net/llc/llc_c_ac.c
View File

@ -995,8 +995,8 @@ static int llc_conn_ac_inc_npta_value(struct sock *sk, struct sk_buff *skb)
llc->dec_step = 0;
llc->dec_cntr = llc->inc_cntr = 2;
++llc->npta;
if (llc->npta > ~LLC_2_SEQ_NBR_MODULO)
llc->npta = ~LLC_2_SEQ_NBR_MODULO ;
if (llc->npta > (u8) ~LLC_2_SEQ_NBR_MODULO)
llc->npta = (u8) ~LLC_2_SEQ_NBR_MODULO;
} else
--llc->inc_cntr;
return 0;
@ -1086,8 +1086,8 @@ int llc_conn_ac_inc_tx_win_size(struct sock *sk, struct sk_buff *skb)
struct llc_sock *llc = llc_sk(sk);
llc->k += 1;
if (llc->k > ~LLC_2_SEQ_NBR_MODULO)
llc->k = ~LLC_2_SEQ_NBR_MODULO ;
if (llc->k > (u8) ~LLC_2_SEQ_NBR_MODULO)
llc->k = (u8) ~LLC_2_SEQ_NBR_MODULO;
return 0;
}

37
net/sched/Kconfig
View File

@ -40,9 +40,10 @@ config NET_SCHED
The available schedulers are listed in the following questions; you
can say Y to as many as you like. If unsure, say N now.
if NET_SCHED
choice
prompt "Packet scheduler clock source"
depends on NET_SCHED
default NET_SCH_CLK_JIFFIES
---help---
Packet schedulers need a monotonic clock that increments at a static
@ -98,11 +99,9 @@ config NET_SCH_CLK_CPU
endchoice
comment "Queueing/Scheduling"
depends on NET_SCHED
config NET_SCH_CBQ
tristate "Class Based Queueing (CBQ)"
depends on NET_SCHED
---help---
Say Y here if you want to use the Class-Based Queueing (CBQ) packet
scheduling algorithm. This algorithm classifies the waiting packets
@ -120,7 +119,6 @@ config NET_SCH_CBQ
config NET_SCH_HTB
tristate "Hierarchical Token Bucket (HTB)"
depends on NET_SCHED
---help---
Say Y here if you want to use the Hierarchical Token Buckets (HTB)
packet scheduling algorithm. See
@ -135,7 +133,6 @@ config NET_SCH_HTB
config NET_SCH_HFSC
tristate "Hierarchical Fair Service Curve (HFSC)"
depends on NET_SCHED
---help---
Say Y here if you want to use the Hierarchical Fair Service Curve
(HFSC) packet scheduling algorithm.
@ -145,7 +142,7 @@ config NET_SCH_HFSC
config NET_SCH_ATM
tristate "ATM Virtual Circuits (ATM)"
depends on NET_SCHED && ATM
depends on ATM
---help---
Say Y here if you want to use the ATM pseudo-scheduler. This
provides a framework for invoking classifiers, which in turn
@ -159,7 +156,6 @@ config NET_SCH_ATM
config NET_SCH_PRIO
tristate "Multi Band Priority Queueing (PRIO)"
depends on NET_SCHED
---help---
Say Y here if you want to use an n-band priority queue packet
scheduler.
@ -169,7 +165,6 @@ config NET_SCH_PRIO
config NET_SCH_RED
tristate "Random Early Detection (RED)"
depends on NET_SCHED
---help---
Say Y here if you want to use the Random Early Detection (RED)
packet scheduling algorithm.
@ -181,7 +176,6 @@ config NET_SCH_RED
config NET_SCH_SFQ
tristate "Stochastic Fairness Queueing (SFQ)"
depends on NET_SCHED
---help---
Say Y here if you want to use the Stochastic Fairness Queueing (SFQ)
packet scheduling algorithm .
@ -193,7 +187,6 @@ config NET_SCH_SFQ
config NET_SCH_TEQL
tristate "True Link Equalizer (TEQL)"
depends on NET_SCHED
---help---
Say Y here if you want to use the True Link Equalizer (TLE) packet
scheduling algorithm. This queueing discipline allows the combination
@ -206,7 +199,6 @@ config NET_SCH_TEQL
config NET_SCH_TBF
tristate "Token Bucket Filter (TBF)"
depends on NET_SCHED
---help---
Say Y here if you want to use the Token Bucket Filter (TBF) packet
scheduling algorithm.
@ -218,7 +210,6 @@ config NET_SCH_TBF
config NET_SCH_GRED
tristate "Generic Random Early Detection (GRED)"
depends on NET_SCHED
---help---
Say Y here if you want to use the Generic Random Early Detection
(GRED) packet scheduling algorithm for some of your network devices
@ -230,7 +221,6 @@ config NET_SCH_GRED
config NET_SCH_DSMARK
tristate "Differentiated Services marker (DSMARK)"
depends on NET_SCHED
---help---
Say Y if you want to schedule packets according to the
Differentiated Services architecture proposed in RFC 2475.
@ -242,7 +232,6 @@ config NET_SCH_DSMARK
config NET_SCH_NETEM
tristate "Network emulator (NETEM)"
depends on NET_SCHED
---help---
Say Y if you want to emulate network delay, loss, and packet
re-ordering. This is often useful to simulate networks when
@ -255,7 +244,6 @@ config NET_SCH_NETEM
config NET_SCH_INGRESS
tristate "Ingress Qdisc"
depends on NET_SCHED
---help---
Say Y here if you want to use classifiers for incoming packets.
If unsure, say Y.
@ -264,14 +252,12 @@ config NET_SCH_INGRESS
module will be called sch_ingress.
comment "Classification"
depends on NET_SCHED
config NET_CLS
boolean
config NET_CLS_BASIC
tristate "Elementary classification (BASIC)"
depends NET_SCHED
select NET_CLS
---help---
Say Y here if you want to be able to classify packets using
@ -282,7 +268,6 @@ config NET_CLS_BASIC
config NET_CLS_TCINDEX
tristate "Traffic-Control Index (TCINDEX)"
depends NET_SCHED
select NET_CLS
---help---
Say Y here if you want to be able to classify packets based on
@ -294,7 +279,6 @@ config NET_CLS_TCINDEX
config NET_CLS_ROUTE4
tristate "Routing decision (ROUTE)"
depends NET_SCHED
select NET_CLS_ROUTE
select NET_CLS
---help---
@ -306,11 +290,9 @@ config NET_CLS_ROUTE4
config NET_CLS_ROUTE
bool
default n
config NET_CLS_FW
tristate "Netfilter mark (FW)"
depends NET_SCHED
select NET_CLS
---help---
If you say Y here, you will be able to classify packets
@ -321,7 +303,6 @@ config NET_CLS_FW
config NET_CLS_U32
tristate "Universal 32bit comparisons w/ hashing (U32)"
depends NET_SCHED
select NET_CLS
---help---
Say Y here to be able to classify packetes using a universal
@ -345,7 +326,6 @@ config CLS_U32_MARK
config NET_CLS_RSVP
tristate "IPv4 Resource Reservation Protocol (RSVP)"
depends on NET_SCHED
select NET_CLS
select NET_ESTIMATOR
---help---
@ -361,7 +341,6 @@ config NET_CLS_RSVP
config NET_CLS_RSVP6
tristate "IPv6 Resource Reservation Protocol (RSVP6)"
depends on NET_SCHED
select NET_CLS
select NET_ESTIMATOR
---help---
@ -377,7 +356,6 @@ config NET_CLS_RSVP6
config NET_EMATCH
bool "Extended Matches"
depends NET_SCHED
select NET_CLS
---help---
Say Y here if you want to use extended matches on top of classifiers
@ -456,7 +434,7 @@ config NET_EMATCH_TEXT
config NET_CLS_ACT
bool "Actions"
depends on EXPERIMENTAL && NET_SCHED
depends on EXPERIMENTAL
select NET_ESTIMATOR
---help---
Say Y here if you want to use traffic control actions. Actions
@ -539,7 +517,7 @@ config NET_ACT_SIMP
config NET_CLS_POLICE
bool "Traffic Policing (obsolete)"
depends on NET_SCHED && NET_CLS_ACT!=y
depends on NET_CLS_ACT!=y
select NET_ESTIMATOR
---help---
Say Y here if you want to do traffic policing, i.e. strict
@ -549,7 +527,7 @@ config NET_CLS_POLICE
config NET_CLS_IND
bool "Incoming device classification"
depends on NET_SCHED && (NET_CLS_U32 || NET_CLS_FW)
depends on NET_CLS_U32 || NET_CLS_FW
---help---
Say Y here to extend the u32 and fw classifier to support
classification based on the incoming device. This option is
@ -557,11 +535,12 @@ config NET_CLS_IND
config NET_ESTIMATOR
bool "Rate estimator"
depends on NET_SCHED
---help---
Say Y here to allow using rate estimators to estimate the current
rate-of-flow for network devices, queues, etc. This module is
automaticaly selected if needed but can be selected manually for
statstical purposes.
endif # NET_SCHED
endmenu