rtc: add driver for BQ32000 I2C RTC

This patch adds basic support for Texas Instruments BQ32000 I2C RTC.  Only
time reading/writing is implemented.  Advanced features, such as trickle
charger and crystal calibration are not supported.

Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Piotr Ziecik 2009-12-15 16:46:12 -08:00 committed by Linus Torvalds
parent 8cfde8c1df
commit 1ce7c83fa9
3 changed files with 214 additions and 0 deletions

View File

@ -242,6 +242,15 @@ config RTC_DRV_M41T80_WDT
If you say Y here you will get support for the
watchdog timer in the ST M41T60 and M41T80 RTC chips series.
config RTC_DRV_BQ32K
tristate "TI BQ32000"
help
If you say Y here you will get support for the TI
BQ32000 I2C RTC chip.
This driver can also be built as a module. If so, the module
will be called rtc-bq32k.
config RTC_DRV_DM355EVM
tristate "TI DaVinci DM355 EVM RTC"
depends on MFD_DM355EVM_MSP

View File

@ -23,6 +23,7 @@ obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o
obj-$(CONFIG_RTC_DRV_AT91SAM9) += rtc-at91sam9.o
obj-$(CONFIG_RTC_DRV_AU1XXX) += rtc-au1xxx.o
obj-$(CONFIG_RTC_DRV_BFIN) += rtc-bfin.o
obj-$(CONFIG_RTC_DRV_BQ32K) += rtc-bq32k.o
obj-$(CONFIG_RTC_DRV_BQ4802) += rtc-bq4802.o
obj-$(CONFIG_RTC_DRV_CMOS) += rtc-cmos.o
obj-$(CONFIG_RTC_DRV_COH901331) += rtc-coh901331.o

204
drivers/rtc/rtc-bq32k.c Normal file
View File

@ -0,0 +1,204 @@
/*
* Driver for TI BQ32000 RTC.
*
* Copyright (C) 2009 Semihalf.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/rtc.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/bcd.h>
#define BQ32K_SECONDS 0x00 /* Seconds register address */
#define BQ32K_SECONDS_MASK 0x7F /* Mask over seconds value */
#define BQ32K_STOP 0x80 /* Oscillator Stop flat */
#define BQ32K_MINUTES 0x01 /* Minutes register address */
#define BQ32K_MINUTES_MASK 0x7F /* Mask over minutes value */
#define BQ32K_OF 0x80 /* Oscillator Failure flag */
#define BQ32K_HOURS_MASK 0x3F /* Mask over hours value */
#define BQ32K_CENT 0x40 /* Century flag */
#define BQ32K_CENT_EN 0x80 /* Century flag enable bit */
struct bq32k_regs {
uint8_t seconds;
uint8_t minutes;
uint8_t cent_hours;
uint8_t day;
uint8_t date;
uint8_t month;
uint8_t years;
};
static struct i2c_driver bq32k_driver;
static int bq32k_read(struct device *dev, void *data, uint8_t off, uint8_t len)
{
struct i2c_client *client = to_i2c_client(dev);
struct i2c_msg msgs[] = {
{
.addr = client->addr,
.flags = 0,
.len = 1,
.buf = &off,
}, {
.addr = client->addr,
.flags = I2C_M_RD,
.len = len,
.buf = data,
}
};
if (i2c_transfer(client->adapter, msgs, 2) == 2)
return 0;
return -EIO;
}
static int bq32k_write(struct device *dev, void *data, uint8_t off, uint8_t len)
{
struct i2c_client *client = to_i2c_client(dev);
uint8_t buffer[len + 1];
buffer[0] = off;
memcpy(&buffer[1], data, len);
if (i2c_master_send(client, buffer, len + 1) == len + 1)
return 0;
return -EIO;
}
static int bq32k_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
struct bq32k_regs regs;
int error;
error = bq32k_read(dev, &regs, 0, sizeof(regs));
if (error)
return error;
tm->tm_sec = bcd2bin(regs.seconds & BQ32K_SECONDS_MASK);
tm->tm_min = bcd2bin(regs.minutes & BQ32K_SECONDS_MASK);
tm->tm_hour = bcd2bin(regs.cent_hours & BQ32K_HOURS_MASK);
tm->tm_mday = bcd2bin(regs.date);
tm->tm_wday = bcd2bin(regs.day) - 1;
tm->tm_mon = bcd2bin(regs.month) - 1;
tm->tm_year = bcd2bin(regs.years) +
((regs.cent_hours & BQ32K_CENT) ? 100 : 0);
return rtc_valid_tm(tm);
}
static int bq32k_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
struct bq32k_regs regs;
regs.seconds = bin2bcd(tm->tm_sec);
regs.minutes = bin2bcd(tm->tm_min);
regs.cent_hours = bin2bcd(tm->tm_hour) | BQ32K_CENT_EN;
regs.day = bin2bcd(tm->tm_wday + 1);
regs.date = bin2bcd(tm->tm_mday);
regs.month = bin2bcd(tm->tm_mon + 1);
if (tm->tm_year >= 100) {
regs.cent_hours |= BQ32K_CENT;
regs.years = bin2bcd(tm->tm_year - 100);
} else
regs.years = bin2bcd(tm->tm_year);
return bq32k_write(dev, &regs, 0, sizeof(regs));
}
static const struct rtc_class_ops bq32k_rtc_ops = {
.read_time = bq32k_rtc_read_time,
.set_time = bq32k_rtc_set_time,
};
static int bq32k_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct device *dev = &client->dev;
struct rtc_device *rtc;
uint8_t reg;
int error;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
return -ENODEV;
/* Check Oscillator Stop flag */
error = bq32k_read(dev, &reg, BQ32K_SECONDS, 1);
if (!error && (reg & BQ32K_STOP)) {
dev_warn(dev, "Oscillator was halted. Restarting...\n");
reg &= ~BQ32K_STOP;
error = bq32k_write(dev, &reg, BQ32K_SECONDS, 1);
}
if (error)
return error;
/* Check Oscillator Failure flag */
error = bq32k_read(dev, &reg, BQ32K_MINUTES, 1);
if (!error && (reg & BQ32K_OF)) {
dev_warn(dev, "Oscillator Failure. Check RTC battery.\n");
reg &= ~BQ32K_OF;
error = bq32k_write(dev, &reg, BQ32K_MINUTES, 1);
}
if (error)
return error;
rtc = rtc_device_register(bq32k_driver.driver.name, &client->dev,
&bq32k_rtc_ops, THIS_MODULE);
if (IS_ERR(rtc))
return PTR_ERR(rtc);
i2c_set_clientdata(client, rtc);
return 0;
}
static int __devexit bq32k_remove(struct i2c_client *client)
{
struct rtc_device *rtc = i2c_get_clientdata(client);
rtc_device_unregister(rtc);
return 0;
}
static const struct i2c_device_id bq32k_id[] = {
{ "bq32000", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, bq32k_id);
static struct i2c_driver bq32k_driver = {
.driver = {
.name = "bq32k",
.owner = THIS_MODULE,
},
.probe = bq32k_probe,
.remove = __devexit_p(bq32k_remove),
.id_table = bq32k_id,
};
static __init int bq32k_init(void)
{
return i2c_add_driver(&bq32k_driver);
}
module_init(bq32k_init);
static __exit void bq32k_exit(void)
{
i2c_del_driver(&bq32k_driver);
}
module_exit(bq32k_exit);
MODULE_AUTHOR("Semihalf, Piotr Ziecik <kosmo@semihalf.com>");
MODULE_DESCRIPTION("TI BQ32000 I2C RTC driver");
MODULE_LICENSE("GPL");