Merge branch 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm

Pull ARM cpufreq driver changes for 5.4 from Viresh Kumar:

"This contains:

- Minor fixes for mediatek driver (Andrew-sh.Cheng and Fabien Parent).
- Minor updates for imx driver (Anson Huang).
- Minor fix for ti-cpufreq driver (Gustavo A. R. Silva).
- Minor fix for ap806 driver (Hariprasad Kelam).
- Significant updates to qcom cpufreq drivers, mostly to support CPR
  stuff (Jorge Ramirez-Ortiz, Niklas Cassel, Sibi Sankar, Douglas
  RAILLARD and Sricharan R).
- New sun50i cpufreq driver (Yangtao Li).

It also contains a few OPP changes which were required because of
dependencies for the qcom cpufreq changes."

* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (22 commits)
  cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist
  cpufreq: qcom: Add support for qcs404 on nvmem driver
  cpufreq: qcom: Refactor the driver to make it easier to extend
  cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs
  dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR
  dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain
  cpufreq: mediatek: Add support for mt8183
  cpufreq: mediatek: change to regulator_get_optional
  cpufreq: imx-cpufreq-dt: Add i.MX8MN support
  cpufreq: Use imx-cpufreq-dt for i.MX8MN's speed grading
  cpufreq: qcom-hw: invoke frequency-invariance setter function
  cpufreq: qcom-hw: Update logic to detect turbo frequency
  cpufreq: mediatek-cpufreq: Add compatible for MT8516
  cpufreq: ti-cpufreq: Mark expected switch fall-through
  dt-bindings: opp: qcom-nvmem: Make speedbin related properties optional
  dt-bindings: opp: Re-organise kryo cpufreq to use it for other nvmem based qcom socs
  opp: Add dev_pm_opp_find_level_exact()
  opp: Return genpd virtual devices from dev_pm_opp_attach_genpd()
  opp: Not all power-domains are scalable
  cpufreq: ap806: Add NULL check after kcalloc
  ...

Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt

@@ -1,25 +1,38 @@
-Qualcomm Technologies, Inc. KRYO CPUFreq and OPP bindings
+Qualcomm Technologies, Inc. NVMEM CPUFreq and OPP bindings
 ===================================
 
-In Certain Qualcomm Technologies, Inc. SoCs like apq8096 and msm8996
+In Certain Qualcomm Technologies, Inc. SoCs like apq8096 and msm8996,
-that have KRYO processors, the CPU ferequencies subset and voltage value
+the CPU frequencies subset and voltage value of each OPP varies based on
-of each OPP varies based on the silicon variant in use.
+the silicon variant in use.
 Qualcomm Technologies, Inc. Process Voltage Scaling Tables
 defines the voltage and frequency value based on the msm-id in SMEM
 and speedbin blown in the efuse combination.
-The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
+The qcom-cpufreq-nvmem driver reads the msm-id and efuse value from the SoC
 to provide the OPP framework with required information (existing HW bitmap).
 This is used to determine the voltage and frequency value for each OPP of
 operating-points-v2 table when it is parsed by the OPP framework.
 
 Required properties:
 --------------------
-In 'cpus' nodes:
+In 'cpu' nodes:
 - operating-points-v2: Phandle to the operating-points-v2 table to use.
 
 In 'operating-points-v2' table:
 - compatible: Should be
 	- 'operating-points-v2-kryo-cpu' for apq8096 and msm8996.
+
+Optional properties:
+--------------------
+In 'cpu' nodes:
+- power-domains: A phandle pointing to the PM domain specifier which provides
+		the performance states available for active state management.
+		Please refer to the power-domains bindings
+		Documentation/devicetree/bindings/power/power_domain.txt
+		and also examples below.
+- power-domain-names: Should be
+	- 'cpr' for qcs404.
+
+In 'operating-points-v2' table:
 - nvmem-cells: A phandle pointing to a nvmem-cells node representing the
 		efuse registers that has information about the
 		speedbin that is used to select the right frequency/voltage
@@ -678,3 +691,105 @@ soc {
 		};
 	};
 };
+
+Example 2:
+---------
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			....
+			clocks = <&apcs_glb>;
+			operating-points-v2 = <&cpu_opp_table>;
+			power-domains = <&cpr>;
+			power-domain-names = "cpr";
+		};
+
+		CPU1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			....
+			clocks = <&apcs_glb>;
+			operating-points-v2 = <&cpu_opp_table>;
+			power-domains = <&cpr>;
+			power-domain-names = "cpr";
+		};
+
+		CPU2: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			....
+			clocks = <&apcs_glb>;
+			operating-points-v2 = <&cpu_opp_table>;
+			power-domains = <&cpr>;
+			power-domain-names = "cpr";
+		};
+
+		CPU3: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			....
+			clocks = <&apcs_glb>;
+			operating-points-v2 = <&cpu_opp_table>;
+			power-domains = <&cpr>;
+			power-domain-names = "cpr";
+		};
+	};
+
+	cpu_opp_table: cpu-opp-table {
+		compatible = "operating-points-v2-kryo-cpu";
+		opp-shared;
+
+		opp-1094400000 {
+			opp-hz = /bits/ 64 <1094400000>;
+			required-opps = <&cpr_opp1>;
+		};
+		opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			required-opps = <&cpr_opp2>;
+		};
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			required-opps = <&cpr_opp3>;
+		};
+	};
+
+	cpr_opp_table: cpr-opp-table {
+		compatible = "operating-points-v2-qcom-level";
+
+		cpr_opp1: opp1 {
+			opp-level = <1>;
+			qcom,opp-fuse-level = <1>;
+		};
+		cpr_opp2: opp2 {
+			opp-level = <2>;
+			qcom,opp-fuse-level = <2>;
+		};
+		cpr_opp3: opp3 {
+			opp-level = <3>;
+			qcom,opp-fuse-level = <3>;
+		};
+	};
+
+....
+
+soc {
+....
+	cpr: power-controller@b018000 {
+		compatible = "qcom,qcs404-cpr", "qcom,cpr";
+		reg = <0x0b018000 0x1000>;
+		....
+		vdd-apc-supply = <&pms405_s3>;
+		#power-domain-cells = <0>;
+		operating-points-v2 = <&cpr_opp_table>;
+		....
+	};
+};

Documentation/devicetree/bindings/opp/qcom-opp.txt

@@ -0,0 +1,19 @@
+Qualcomm OPP bindings to describe OPP nodes
+
+The bindings are based on top of the operating-points-v2 bindings
+described in Documentation/devicetree/bindings/opp/opp.txt
+Additional properties are described below.
+
+* OPP Table Node
+
+Required properties:
+- compatible: Allow OPPs to express their compatibility. It should be:
+  "operating-points-v2-qcom-level"
+
+* OPP Node
+
+Required properties:
+- qcom,opp-fuse-level: A positive value representing the fuse corner/level
+  associated with this OPP node. Sometimes several corners/levels shares
+  a certain fuse corner/level. A fuse corner/level contains e.g. ref uV,
+  min uV, and max uV.

Documentation/devicetree/bindings/opp/sun50i-nvmem-cpufreq.txt

@@ -0,0 +1,167 @@
+Allwinner Technologies, Inc. NVMEM CPUFreq and OPP bindings
+===================================
+
+For some SoCs, the CPU frequency subset and voltage value of each OPP
+varies based on the silicon variant in use. Allwinner Process Voltage
+Scaling Tables defines the voltage and frequency value based on the
+speedbin blown in the efuse combination. The sun50i-cpufreq-nvmem driver
+reads the efuse value from the SoC to provide the OPP framework with
+required information.
+
+Required properties:
+--------------------
+In 'cpus' nodes:
+- operating-points-v2: Phandle to the operating-points-v2 table to use.
+
+In 'operating-points-v2' table:
+- compatible: Should be
+	- 'allwinner,sun50i-h6-operating-points'.
+- nvmem-cells: A phandle pointing to a nvmem-cells node representing the
+		efuse registers that has information about the speedbin
+		that is used to select the right frequency/voltage value
+		pair. Please refer the for nvmem-cells bindings
+		Documentation/devicetree/bindings/nvmem/nvmem.txt and
+		also examples below.
+
+In every OPP node:
+- opp-microvolt-<name>: Voltage in micro Volts.
+			At runtime, the platform can pick a <name> and
+			matching opp-microvolt-<name> property.
+			[See: opp.txt]
+			HW:		<name>:
+			sun50i-h6	speed0 speed1 speed2
+
+Example 1:
+---------
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <1>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <2>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <3>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+		};
+        };
+
+        cpu_opp_table: opp_table {
+                compatible = "allwinner,sun50i-h6-operating-points";
+                nvmem-cells = <&speedbin_efuse>;
+                opp-shared;
+
+                opp@480000000 {
+                        clock-latency-ns = <244144>; /* 8 32k periods */
+                        opp-hz = /bits/ 64 <480000000>;
+
+                        opp-microvolt-speed0 = <880000>;
+                        opp-microvolt-speed1 = <820000>;
+                        opp-microvolt-speed2 = <800000>;
+                };
+
+                opp@720000000 {
+                        clock-latency-ns = <244144>; /* 8 32k periods */
+                        opp-hz = /bits/ 64 <720000000>;
+
+                        opp-microvolt-speed0 = <880000>;
+                        opp-microvolt-speed1 = <820000>;
+                        opp-microvolt-speed2 = <800000>;
+                };
+
+                opp@816000000 {
+                        clock-latency-ns = <244144>; /* 8 32k periods */
+                        opp-hz = /bits/ 64 <816000000>;
+
+                        opp-microvolt-speed0 = <880000>;
+                        opp-microvolt-speed1 = <820000>;
+                        opp-microvolt-speed2 = <800000>;
+                };
+
+                opp@888000000 {
+                        clock-latency-ns = <244144>; /* 8 32k periods */
+                        opp-hz = /bits/ 64 <888000000>;
+
+                        opp-microvolt-speed0 = <940000>;
+                        opp-microvolt-speed1 = <820000>;
+                        opp-microvolt-speed2 = <800000>;
+                };
+
+                opp@1080000000 {
+                        clock-latency-ns = <244144>; /* 8 32k periods */
+                        opp-hz = /bits/ 64 <1080000000>;
+
+                        opp-microvolt-speed0 = <1060000>;
+                        opp-microvolt-speed1 = <880000>;
+                        opp-microvolt-speed2 = <840000>;
+                };
+
+                opp@1320000000 {
+                        clock-latency-ns = <244144>; /* 8 32k periods */
+                        opp-hz = /bits/ 64 <1320000000>;
+
+                        opp-microvolt-speed0 = <1160000>;
+                        opp-microvolt-speed1 = <940000>;
+                        opp-microvolt-speed2 = <900000>;
+                };
+
+                opp@1488000000 {
+                        clock-latency-ns = <244144>; /* 8 32k periods */
+                        opp-hz = /bits/ 64 <1488000000>;
+
+                        opp-microvolt-speed0 = <1160000>;
+                        opp-microvolt-speed1 = <1000000>;
+                        opp-microvolt-speed2 = <960000>;
+                };
+        };
+....
+soc {
+....
+	sid: sid@3006000 {
+		compatible = "allwinner,sun50i-h6-sid";
+		reg = <0x03006000 0x400>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		....
+		speedbin_efuse: speed@1c {
+			reg = <0x1c 4>;
+		};
+        };
+};

MAINTAINERS

@@ -676,6 +676,13 @@ L:	linux-media@vger.kernel.org
 S:	Maintained
 F:	drivers/staging/media/allegro-dvt/
 
+ALLWINNER CPUFREQ DRIVER
+M:	Yangtao Li <tiny.windzz@gmail.com>
+L:	linux-pm@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/opp/sun50i-nvmem-cpufreq.txt
+F:	drivers/cpufreq/sun50i-cpufreq-nvmem.c
+
 ALLWINNER SECURITY SYSTEM
 M:	Corentin Labbe <clabbe.montjoie@gmail.com>
 L:	linux-crypto@vger.kernel.org
@@ -13300,8 +13307,8 @@ QUALCOMM CPUFREQ DRIVER MSM8996/APQ8096
 M:	Ilia Lin <ilia.lin@kernel.org>
 L:	linux-pm@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/opp/kryo-cpufreq.txt
+F:	Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
-F:	drivers/cpufreq/qcom-cpufreq-kryo.c
+F:	drivers/cpufreq/qcom-cpufreq-nvmem.c
 
 QUALCOMM EMAC GIGABIT ETHERNET DRIVER
 M:	Timur Tabi <timur@kernel.org>

drivers/cpufreq/Kconfig.arm

@@ -19,6 +19,18 @@ config ACPI_CPPC_CPUFREQ
 
 	  If in doubt, say N.
 
+config ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM
+	tristate "Allwinner nvmem based SUN50I CPUFreq driver"
+	depends on ARCH_SUNXI
+	depends on NVMEM_SUNXI_SID
+	select PM_OPP
+	help
+	  This adds the nvmem based CPUFreq driver for Allwinner
+	  h6 SoC.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sun50i-cpufreq-nvmem.
+
 config ARM_ARMADA_37XX_CPUFREQ
 	tristate "Armada 37xx CPUFreq support"
 	depends on ARCH_MVEBU && CPUFREQ_DT
@@ -120,8 +132,8 @@ config ARM_OMAP2PLUS_CPUFREQ
 	depends on ARCH_OMAP2PLUS
 	default ARCH_OMAP2PLUS
 
-config ARM_QCOM_CPUFREQ_KRYO
+config ARM_QCOM_CPUFREQ_NVMEM
-	tristate "Qualcomm Kryo based CPUFreq"
+	tristate "Qualcomm nvmem based CPUFreq"
 	depends on ARM64
 	depends on QCOM_QFPROM
 	depends on QCOM_SMEM

drivers/cpufreq/Makefile

@@ -64,7 +64,7 @@ obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= omap-cpufreq.o
 obj-$(CONFIG_ARM_PXA2xx_CPUFREQ)	+= pxa2xx-cpufreq.o
 obj-$(CONFIG_PXA3xx)			+= pxa3xx-cpufreq.o
 obj-$(CONFIG_ARM_QCOM_CPUFREQ_HW)	+= qcom-cpufreq-hw.o
-obj-$(CONFIG_ARM_QCOM_CPUFREQ_KRYO)	+= qcom-cpufreq-kryo.o
+obj-$(CONFIG_ARM_QCOM_CPUFREQ_NVMEM)	+= qcom-cpufreq-nvmem.o
 obj-$(CONFIG_ARM_RASPBERRYPI_CPUFREQ) 	+= raspberrypi-cpufreq.o
 obj-$(CONFIG_ARM_S3C2410_CPUFREQ)	+= s3c2410-cpufreq.o
 obj-$(CONFIG_ARM_S3C2412_CPUFREQ)	+= s3c2412-cpufreq.o
@@ -80,6 +80,7 @@ obj-$(CONFIG_ARM_SCMI_CPUFREQ)		+= scmi-cpufreq.o
 obj-$(CONFIG_ARM_SCPI_CPUFREQ)		+= scpi-cpufreq.o
 obj-$(CONFIG_ARM_SPEAR_CPUFREQ)		+= spear-cpufreq.o
 obj-$(CONFIG_ARM_STI_CPUFREQ)		+= sti-cpufreq.o
+obj-$(CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM) += sun50i-cpufreq-nvmem.o
 obj-$(CONFIG_ARM_TANGO_CPUFREQ)		+= tango-cpufreq.o
 obj-$(CONFIG_ARM_TEGRA20_CPUFREQ)	+= tegra20-cpufreq.o
 obj-$(CONFIG_ARM_TEGRA124_CPUFREQ)	+= tegra124-cpufreq.o

drivers/cpufreq/armada-8k-cpufreq.c

@@ -136,6 +136,8 @@ static int __init armada_8k_cpufreq_init(void)
 
 	nb_cpus = num_possible_cpus();
 	freq_tables = kcalloc(nb_cpus, sizeof(*freq_tables), GFP_KERNEL);
+	if (!freq_tables)
+		return -ENOMEM;
 	cpumask_copy(&cpus, cpu_possible_mask);
 
 	/*

drivers/cpufreq/cpufreq-dt-platdev.c

@@ -101,12 +101,15 @@ static const struct of_device_id whitelist[] __initconst = {
  * platforms using "operating-points-v2" property.
  */
 static const struct of_device_id blacklist[] __initconst = {
+	{ .compatible = "allwinner,sun50i-h6", },
+
 	{ .compatible = "calxeda,highbank", },
 	{ .compatible = "calxeda,ecx-2000", },
 
 	{ .compatible = "fsl,imx7d", },
 	{ .compatible = "fsl,imx8mq", },
 	{ .compatible = "fsl,imx8mm", },
+	{ .compatible = "fsl,imx8mn", },
 
 	{ .compatible = "marvell,armadaxp", },
 
@@ -117,12 +120,14 @@ static const struct of_device_id blacklist[] __initconst = {
 	{ .compatible = "mediatek,mt817x", },
 	{ .compatible = "mediatek,mt8173", },
 	{ .compatible = "mediatek,mt8176", },
+	{ .compatible = "mediatek,mt8183", },
 
 	{ .compatible = "nvidia,tegra124", },
 	{ .compatible = "nvidia,tegra210", },
 
 	{ .compatible = "qcom,apq8096", },
 	{ .compatible = "qcom,msm8996", },
+	{ .compatible = "qcom,qcs404", },
 
 	{ .compatible = "st,stih407", },
 	{ .compatible = "st,stih410", },

drivers/cpufreq/imx-cpufreq-dt.c

@@ -16,6 +16,7 @@
 
 #define OCOTP_CFG3_SPEED_GRADE_SHIFT	8
 #define OCOTP_CFG3_SPEED_GRADE_MASK	(0x3 << 8)
+#define IMX8MN_OCOTP_CFG3_SPEED_GRADE_MASK	(0xf << 8)
 #define OCOTP_CFG3_MKT_SEGMENT_SHIFT    6
 #define OCOTP_CFG3_MKT_SEGMENT_MASK     (0x3 << 6)
 
@@ -34,7 +35,12 @@ static int imx_cpufreq_dt_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	speed_grade = (cell_value & OCOTP_CFG3_SPEED_GRADE_MASK) >> OCOTP_CFG3_SPEED_GRADE_SHIFT;
+	if (of_machine_is_compatible("fsl,imx8mn"))
+		speed_grade = (cell_value & IMX8MN_OCOTP_CFG3_SPEED_GRADE_MASK)
+			      >> OCOTP_CFG3_SPEED_GRADE_SHIFT;
+	else
+		speed_grade = (cell_value & OCOTP_CFG3_SPEED_GRADE_MASK)
+			      >> OCOTP_CFG3_SPEED_GRADE_SHIFT;
 	mkt_segment = (cell_value & OCOTP_CFG3_MKT_SEGMENT_MASK) >> OCOTP_CFG3_MKT_SEGMENT_SHIFT;
 
 	/*

drivers/cpufreq/mediatek-cpufreq.c

@@ -338,7 +338,7 @@ static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu)
 		goto out_free_resources;
 	}
 
-	proc_reg = regulator_get_exclusive(cpu_dev, "proc");
+	proc_reg = regulator_get_optional(cpu_dev, "proc");
 	if (IS_ERR(proc_reg)) {
 		if (PTR_ERR(proc_reg) == -EPROBE_DEFER)
 			pr_warn("proc regulator for cpu%d not ready, retry.\n",
@@ -535,6 +535,8 @@ static const struct of_device_id mtk_cpufreq_machines[] __initconst = {
 	{ .compatible = "mediatek,mt817x", },
 	{ .compatible = "mediatek,mt8173", },
 	{ .compatible = "mediatek,mt8176", },
+	{ .compatible = "mediatek,mt8183", },
+	{ .compatible = "mediatek,mt8516", },
 
 	{ }
 };

drivers/cpufreq/qcom-cpufreq-hw.c

@@ -20,6 +20,7 @@
 #define LUT_VOLT			GENMASK(11, 0)
 #define LUT_ROW_SIZE			32
 #define CLK_HW_DIV			2
+#define LUT_TURBO_IND			1
 
 /* Register offsets */
 #define REG_ENABLE			0x0
@@ -34,9 +35,12 @@ static int qcom_cpufreq_hw_target_index(struct cpufreq_policy *policy,
 					unsigned int index)
 {
 	void __iomem *perf_state_reg = policy->driver_data;
+	unsigned long freq = policy->freq_table[index].frequency;
 
 	writel_relaxed(index, perf_state_reg);
 
+	arch_set_freq_scale(policy->related_cpus, freq,
+			    policy->cpuinfo.max_freq);
 	return 0;
 }
 
@@ -63,6 +67,7 @@ static unsigned int qcom_cpufreq_hw_fast_switch(struct cpufreq_policy *policy,
 {
 	void __iomem *perf_state_reg = policy->driver_data;
 	int index;
+	unsigned long freq;
 
 	index = policy->cached_resolved_idx;
 	if (index < 0)
@@ -70,16 +75,19 @@ static unsigned int qcom_cpufreq_hw_fast_switch(struct cpufreq_policy *policy,
 
 	writel_relaxed(index, perf_state_reg);
 
-	return policy->freq_table[index].frequency;
+	freq = policy->freq_table[index].frequency;
+	arch_set_freq_scale(policy->related_cpus, freq,
+			    policy->cpuinfo.max_freq);
+
+	return freq;
 }
 
 static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
 				    struct cpufreq_policy *policy,
 				    void __iomem *base)
 {
-	u32 data, src, lval, i, core_count, prev_cc = 0, prev_freq = 0, freq;
+	u32 data, src, lval, i, core_count, prev_freq = 0, freq;
 	u32 volt;
-	unsigned int max_cores = cpumask_weight(policy->cpus);
 	struct cpufreq_frequency_table	*table;
 
 	table = kcalloc(LUT_MAX_ENTRIES + 1, sizeof(*table), GFP_KERNEL);
@@ -102,12 +110,12 @@ static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
 		else
 			freq = cpu_hw_rate / 1000;
 
-		if (freq != prev_freq && core_count == max_cores) {
+		if (freq != prev_freq && core_count != LUT_TURBO_IND) {
 			table[i].frequency = freq;
 			dev_pm_opp_add(cpu_dev, freq * 1000, volt);
 			dev_dbg(cpu_dev, "index=%d freq=%d, core_count %d\n", i,
 				freq, core_count);
-		} else {
+		} else if (core_count == LUT_TURBO_IND) {
 			table[i].frequency = CPUFREQ_ENTRY_INVALID;
 		}
 
@@ -115,14 +123,14 @@ static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
 		 * Two of the same frequencies with the same core counts means
 		 * end of table
 		 */
-		if (i > 0 && prev_freq == freq && prev_cc == core_count) {
+		if (i > 0 && prev_freq == freq) {
 			struct cpufreq_frequency_table *prev = &table[i - 1];
 
 			/*
 			 * Only treat the last frequency that might be a boost
 			 * as the boost frequency
 			 */
-			if (prev_cc != max_cores) {
+			if (prev->frequency == CPUFREQ_ENTRY_INVALID) {
 				prev->frequency = prev_freq;
 				prev->flags = CPUFREQ_BOOST_FREQ;
 				dev_pm_opp_add(cpu_dev,	prev_freq * 1000, volt);
@@ -131,7 +139,6 @@ static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
 			break;
 		}
 
-		prev_cc = core_count;
 		prev_freq = freq;
 	}
 

drivers/cpufreq/qcom-cpufreq-kryo.c

@@ -1,249 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2018, The Linux Foundation. All rights reserved.
- */
-
-/*
- * In Certain QCOM SoCs like apq8096 and msm8996 that have KRYO processors,
- * the CPU frequency subset and voltage value of each OPP varies
- * based on the silicon variant in use. Qualcomm Process Voltage Scaling Tables
- * defines the voltage and frequency value based on the msm-id in SMEM
- * and speedbin blown in the efuse combination.
- * The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
- * to provide the OPP framework with required information.
- * This is used to determine the voltage and frequency value for each OPP of
- * operating-points-v2 table when it is parsed by the OPP framework.
- */
-
-#include <linux/cpu.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/nvmem-consumer.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/pm_opp.h>
-#include <linux/slab.h>
-#include <linux/soc/qcom/smem.h>
-
-#define MSM_ID_SMEM	137
-
-enum _msm_id {
-	MSM8996V3 = 0xF6ul,
-	APQ8096V3 = 0x123ul,
-	MSM8996SG = 0x131ul,
-	APQ8096SG = 0x138ul,
-};
-
-enum _msm8996_version {
-	MSM8996_V3,
-	MSM8996_SG,
-	NUM_OF_MSM8996_VERSIONS,
-};
-
-static struct platform_device *cpufreq_dt_pdev, *kryo_cpufreq_pdev;
-
-static enum _msm8996_version qcom_cpufreq_kryo_get_msm_id(void)
-{
-	size_t len;
-	u32 *msm_id;
-	enum _msm8996_version version;
-
-	msm_id = qcom_smem_get(QCOM_SMEM_HOST_ANY, MSM_ID_SMEM, &len);
-	if (IS_ERR(msm_id))
-		return NUM_OF_MSM8996_VERSIONS;
-
-	/* The first 4 bytes are format, next to them is the actual msm-id */
-	msm_id++;
-
-	switch ((enum _msm_id)*msm_id) {
-	case MSM8996V3:
-	case APQ8096V3:
-		version = MSM8996_V3;
-		break;
-	case MSM8996SG:
-	case APQ8096SG:
-		version = MSM8996_SG;
-		break;
-	default:
-		version = NUM_OF_MSM8996_VERSIONS;
-	}
-
-	return version;
-}
-
-static int qcom_cpufreq_kryo_probe(struct platform_device *pdev)
-{
-	struct opp_table **opp_tables;
-	enum _msm8996_version msm8996_version;
-	struct nvmem_cell *speedbin_nvmem;
-	struct device_node *np;
-	struct device *cpu_dev;
-	unsigned cpu;
-	u8 *speedbin;
-	u32 versions;
-	size_t len;
-	int ret;
-
-	cpu_dev = get_cpu_device(0);
-	if (!cpu_dev)
-		return -ENODEV;
-
-	msm8996_version = qcom_cpufreq_kryo_get_msm_id();
-	if (NUM_OF_MSM8996_VERSIONS == msm8996_version) {
-		dev_err(cpu_dev, "Not Snapdragon 820/821!");
-		return -ENODEV;
-	}
-
-	np = dev_pm_opp_of_get_opp_desc_node(cpu_dev);
-	if (!np)
-		return -ENOENT;
-
-	ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu");
-	if (!ret) {
-		of_node_put(np);
-		return -ENOENT;
-	}
-
-	speedbin_nvmem = of_nvmem_cell_get(np, NULL);
-	of_node_put(np);
-	if (IS_ERR(speedbin_nvmem)) {
-		if (PTR_ERR(speedbin_nvmem) != -EPROBE_DEFER)
-			dev_err(cpu_dev, "Could not get nvmem cell: %ld\n",
-				PTR_ERR(speedbin_nvmem));
-		return PTR_ERR(speedbin_nvmem);
-	}
-
-	speedbin = nvmem_cell_read(speedbin_nvmem, &len);
-	nvmem_cell_put(speedbin_nvmem);
-	if (IS_ERR(speedbin))
-		return PTR_ERR(speedbin);
-
-	switch (msm8996_version) {
-	case MSM8996_V3:
-		versions = 1 << (unsigned int)(*speedbin);
-		break;
-	case MSM8996_SG:
-		versions = 1 << ((unsigned int)(*speedbin) + 4);
-		break;
-	default:
-		BUG();
-		break;
-	}
-	kfree(speedbin);
-
-	opp_tables = kcalloc(num_possible_cpus(), sizeof(*opp_tables), GFP_KERNEL);
-	if (!opp_tables)
-		return -ENOMEM;
-
-	for_each_possible_cpu(cpu) {
-		cpu_dev = get_cpu_device(cpu);
-		if (NULL == cpu_dev) {
-			ret = -ENODEV;
-			goto free_opp;
-		}
-
-		opp_tables[cpu] = dev_pm_opp_set_supported_hw(cpu_dev,
-							      &versions, 1);
-		if (IS_ERR(opp_tables[cpu])) {
-			ret = PTR_ERR(opp_tables[cpu]);
-			dev_err(cpu_dev, "Failed to set supported hardware\n");
-			goto free_opp;
-		}
-	}
-
-	cpufreq_dt_pdev = platform_device_register_simple("cpufreq-dt", -1,
-							  NULL, 0);
-	if (!IS_ERR(cpufreq_dt_pdev)) {
-		platform_set_drvdata(pdev, opp_tables);
-		return 0;
-	}
-
-	ret = PTR_ERR(cpufreq_dt_pdev);
-	dev_err(cpu_dev, "Failed to register platform device\n");
-
-free_opp:
-	for_each_possible_cpu(cpu) {
-		if (IS_ERR_OR_NULL(opp_tables[cpu]))
-			break;
-		dev_pm_opp_put_supported_hw(opp_tables[cpu]);
-	}
-	kfree(opp_tables);
-
-	return ret;
-}
-
-static int qcom_cpufreq_kryo_remove(struct platform_device *pdev)
-{
-	struct opp_table **opp_tables = platform_get_drvdata(pdev);
-	unsigned int cpu;
-
-	platform_device_unregister(cpufreq_dt_pdev);
-
-	for_each_possible_cpu(cpu)
-		dev_pm_opp_put_supported_hw(opp_tables[cpu]);
-
-	kfree(opp_tables);
-
-	return 0;
-}
-
-static struct platform_driver qcom_cpufreq_kryo_driver = {
-	.probe = qcom_cpufreq_kryo_probe,
-	.remove = qcom_cpufreq_kryo_remove,
-	.driver = {
-		.name = "qcom-cpufreq-kryo",
-	},
-};
-
-static const struct of_device_id qcom_cpufreq_kryo_match_list[] __initconst = {
-	{ .compatible = "qcom,apq8096", },
-	{ .compatible = "qcom,msm8996", },
-	{}
-};
-
-/*
- * Since the driver depends on smem and nvmem drivers, which may
- * return EPROBE_DEFER, all the real activity is done in the probe,
- * which may be defered as well. The init here is only registering
- * the driver and the platform device.
- */
-static int __init qcom_cpufreq_kryo_init(void)
-{
-	struct device_node *np = of_find_node_by_path("/");
-	const struct of_device_id *match;
-	int ret;
-
-	if (!np)
-		return -ENODEV;
-
-	match = of_match_node(qcom_cpufreq_kryo_match_list, np);
-	of_node_put(np);
-	if (!match)
-		return -ENODEV;
-
-	ret = platform_driver_register(&qcom_cpufreq_kryo_driver);
-	if (unlikely(ret < 0))
-		return ret;
-
-	kryo_cpufreq_pdev = platform_device_register_simple(
-		"qcom-cpufreq-kryo", -1, NULL, 0);
-	ret = PTR_ERR_OR_ZERO(kryo_cpufreq_pdev);
-	if (0 == ret)
-		return 0;
-
-	platform_driver_unregister(&qcom_cpufreq_kryo_driver);
-	return ret;
-}
-module_init(qcom_cpufreq_kryo_init);
-
-static void __exit qcom_cpufreq_kryo_exit(void)
-{
-	platform_device_unregister(kryo_cpufreq_pdev);
-	platform_driver_unregister(&qcom_cpufreq_kryo_driver);
-}
-module_exit(qcom_cpufreq_kryo_exit);
-
-MODULE_DESCRIPTION("Qualcomm Technologies, Inc. Kryo CPUfreq driver");
-MODULE_LICENSE("GPL v2");

drivers/cpufreq/qcom-cpufreq-nvmem.c

@@ -0,0 +1,352 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+/*
+ * In Certain QCOM SoCs like apq8096 and msm8996 that have KRYO processors,
+ * the CPU frequency subset and voltage value of each OPP varies
+ * based on the silicon variant in use. Qualcomm Process Voltage Scaling Tables
+ * defines the voltage and frequency value based on the msm-id in SMEM
+ * and speedbin blown in the efuse combination.
+ * The qcom-cpufreq-nvmem driver reads the msm-id and efuse value from the SoC
+ * to provide the OPP framework with required information.
+ * This is used to determine the voltage and frequency value for each OPP of
+ * operating-points-v2 table when it is parsed by the OPP framework.
+ */
+
+#include <linux/cpu.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_opp.h>
+#include <linux/slab.h>
+#include <linux/soc/qcom/smem.h>
+
+#define MSM_ID_SMEM	137
+
+enum _msm_id {
+	MSM8996V3 = 0xF6ul,
+	APQ8096V3 = 0x123ul,
+	MSM8996SG = 0x131ul,
+	APQ8096SG = 0x138ul,
+};
+
+enum _msm8996_version {
+	MSM8996_V3,
+	MSM8996_SG,
+	NUM_OF_MSM8996_VERSIONS,
+};
+
+struct qcom_cpufreq_drv;
+
+struct qcom_cpufreq_match_data {
+	int (*get_version)(struct device *cpu_dev,
+			   struct nvmem_cell *speedbin_nvmem,
+			   struct qcom_cpufreq_drv *drv);
+	const char **genpd_names;
+};
+
+struct qcom_cpufreq_drv {
+	struct opp_table **opp_tables;
+	struct opp_table **genpd_opp_tables;
+	u32 versions;
+	const struct qcom_cpufreq_match_data *data;
+};
+
+static struct platform_device *cpufreq_dt_pdev, *cpufreq_pdev;
+
+static enum _msm8996_version qcom_cpufreq_get_msm_id(void)
+{
+	size_t len;
+	u32 *msm_id;
+	enum _msm8996_version version;
+
+	msm_id = qcom_smem_get(QCOM_SMEM_HOST_ANY, MSM_ID_SMEM, &len);
+	if (IS_ERR(msm_id))
+		return NUM_OF_MSM8996_VERSIONS;
+
+	/* The first 4 bytes are format, next to them is the actual msm-id */
+	msm_id++;
+
+	switch ((enum _msm_id)*msm_id) {
+	case MSM8996V3:
+	case APQ8096V3:
+		version = MSM8996_V3;
+		break;
+	case MSM8996SG:
+	case APQ8096SG:
+		version = MSM8996_SG;
+		break;
+	default:
+		version = NUM_OF_MSM8996_VERSIONS;
+	}
+
+	return version;
+}
+
+static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
+					  struct nvmem_cell *speedbin_nvmem,
+					  struct qcom_cpufreq_drv *drv)
+{
+	size_t len;
+	u8 *speedbin;
+	enum _msm8996_version msm8996_version;
+
+	msm8996_version = qcom_cpufreq_get_msm_id();
+	if (NUM_OF_MSM8996_VERSIONS == msm8996_version) {
+		dev_err(cpu_dev, "Not Snapdragon 820/821!");
+		return -ENODEV;
+	}
+
+	speedbin = nvmem_cell_read(speedbin_nvmem, &len);
+	if (IS_ERR(speedbin))
+		return PTR_ERR(speedbin);
+
+	switch (msm8996_version) {
+	case MSM8996_V3:
+		drv->versions = 1 << (unsigned int)(*speedbin);
+		break;
+	case MSM8996_SG:
+		drv->versions = 1 << ((unsigned int)(*speedbin) + 4);
+		break;
+	default:
+		BUG();
+		break;
+	}
+
+	kfree(speedbin);
+	return 0;
+}
+
+static const struct qcom_cpufreq_match_data match_data_kryo = {
+	.get_version = qcom_cpufreq_kryo_name_version,
+};
+
+static const char *qcs404_genpd_names[] = { "cpr", NULL };
+
+static const struct qcom_cpufreq_match_data match_data_qcs404 = {
+	.genpd_names = qcs404_genpd_names,
+};
+
+static int qcom_cpufreq_probe(struct platform_device *pdev)
+{
+	struct qcom_cpufreq_drv *drv;
+	struct nvmem_cell *speedbin_nvmem;
+	struct device_node *np;
+	struct device *cpu_dev;
+	unsigned cpu;
+	const struct of_device_id *match;
+	int ret;
+
+	cpu_dev = get_cpu_device(0);
+	if (!cpu_dev)
+		return -ENODEV;
+
+	np = dev_pm_opp_of_get_opp_desc_node(cpu_dev);
+	if (!np)
+		return -ENOENT;
+
+	ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu");
+	if (!ret) {
+		of_node_put(np);
+		return -ENOENT;
+	}
+
+	drv = kzalloc(sizeof(*drv), GFP_KERNEL);
+	if (!drv)
+		return -ENOMEM;
+
+	match = pdev->dev.platform_data;
+	drv->data = match->data;
+	if (!drv->data) {
+		ret = -ENODEV;
+		goto free_drv;
+	}
+
+	if (drv->data->get_version) {
+		speedbin_nvmem = of_nvmem_cell_get(np, NULL);
+		if (IS_ERR(speedbin_nvmem)) {
+			if (PTR_ERR(speedbin_nvmem) != -EPROBE_DEFER)
+				dev_err(cpu_dev,
+					"Could not get nvmem cell: %ld\n",
+					PTR_ERR(speedbin_nvmem));
+			ret = PTR_ERR(speedbin_nvmem);
+			goto free_drv;
+		}
+
+		ret = drv->data->get_version(cpu_dev, speedbin_nvmem, drv);
+		if (ret) {
+			nvmem_cell_put(speedbin_nvmem);
+			goto free_drv;
+		}
+		nvmem_cell_put(speedbin_nvmem);
+	}
+	of_node_put(np);
+
+	drv->opp_tables = kcalloc(num_possible_cpus(), sizeof(*drv->opp_tables),
+				  GFP_KERNEL);
+	if (!drv->opp_tables) {
+		ret = -ENOMEM;
+		goto free_drv;
+	}
+
+	drv->genpd_opp_tables = kcalloc(num_possible_cpus(),
+					sizeof(*drv->genpd_opp_tables),
+					GFP_KERNEL);
+	if (!drv->genpd_opp_tables) {
+		ret = -ENOMEM;
+		goto free_opp;
+	}
+
+	for_each_possible_cpu(cpu) {
+		cpu_dev = get_cpu_device(cpu);
+		if (NULL == cpu_dev) {
+			ret = -ENODEV;
+			goto free_genpd_opp;
+		}
+
+		if (drv->data->get_version) {
+			drv->opp_tables[cpu] =
+				dev_pm_opp_set_supported_hw(cpu_dev,
+							    &drv->versions, 1);
+			if (IS_ERR(drv->opp_tables[cpu])) {
+				ret = PTR_ERR(drv->opp_tables[cpu]);
+				dev_err(cpu_dev,
+					"Failed to set supported hardware\n");
+				goto free_genpd_opp;
+			}
+		}
+
+		if (drv->data->genpd_names) {
+			drv->genpd_opp_tables[cpu] =
+				dev_pm_opp_attach_genpd(cpu_dev,
+							drv->data->genpd_names,
+							NULL);
+			if (IS_ERR(drv->genpd_opp_tables[cpu])) {
+				ret = PTR_ERR(drv->genpd_opp_tables[cpu]);
+				if (ret != -EPROBE_DEFER)
+					dev_err(cpu_dev,
+						"Could not attach to pm_domain: %d\n",
+						ret);
+				goto free_genpd_opp;
+			}
+		}
+	}
+
+	cpufreq_dt_pdev = platform_device_register_simple("cpufreq-dt", -1,
+							  NULL, 0);
+	if (!IS_ERR(cpufreq_dt_pdev)) {
+		platform_set_drvdata(pdev, drv);
+		return 0;
+	}
+
+	ret = PTR_ERR(cpufreq_dt_pdev);
+	dev_err(cpu_dev, "Failed to register platform device\n");
+
+free_genpd_opp:
+	for_each_possible_cpu(cpu) {
+		if (IS_ERR_OR_NULL(drv->genpd_opp_tables[cpu]))
+			break;
+		dev_pm_opp_detach_genpd(drv->genpd_opp_tables[cpu]);
+	}
+	kfree(drv->genpd_opp_tables);
+free_opp:
+	for_each_possible_cpu(cpu) {
+		if (IS_ERR_OR_NULL(drv->opp_tables[cpu]))
+			break;
+		dev_pm_opp_put_supported_hw(drv->opp_tables[cpu]);
+	}
+	kfree(drv->opp_tables);
+free_drv:
+	kfree(drv);
+
+	return ret;
+}
+
+static int qcom_cpufreq_remove(struct platform_device *pdev)
+{
+	struct qcom_cpufreq_drv *drv = platform_get_drvdata(pdev);
+	unsigned int cpu;
+
+	platform_device_unregister(cpufreq_dt_pdev);
+
+	for_each_possible_cpu(cpu) {
+		if (drv->opp_tables[cpu])
+			dev_pm_opp_put_supported_hw(drv->opp_tables[cpu]);
+		if (drv->genpd_opp_tables[cpu])
+			dev_pm_opp_detach_genpd(drv->genpd_opp_tables[cpu]);
+	}
+
+	kfree(drv->opp_tables);
+	kfree(drv->genpd_opp_tables);
+	kfree(drv);
+
+	return 0;
+}
+
+static struct platform_driver qcom_cpufreq_driver = {
+	.probe = qcom_cpufreq_probe,
+	.remove = qcom_cpufreq_remove,
+	.driver = {
+		.name = "qcom-cpufreq-nvmem",
+	},
+};
+
+static const struct of_device_id qcom_cpufreq_match_list[] __initconst = {
+	{ .compatible = "qcom,apq8096", .data = &match_data_kryo },
+	{ .compatible = "qcom,msm8996", .data = &match_data_kryo },
+	{ .compatible = "qcom,qcs404", .data = &match_data_qcs404 },
+	{},
+};
+
+/*
+ * Since the driver depends on smem and nvmem drivers, which may
+ * return EPROBE_DEFER, all the real activity is done in the probe,
+ * which may be defered as well. The init here is only registering
+ * the driver and the platform device.
+ */
+static int __init qcom_cpufreq_init(void)
+{
+	struct device_node *np = of_find_node_by_path("/");
+	const struct of_device_id *match;
+	int ret;
+
+	if (!np)
+		return -ENODEV;
+
+	match = of_match_node(qcom_cpufreq_match_list, np);
+	of_node_put(np);
+	if (!match)
+		return -ENODEV;
+
+	ret = platform_driver_register(&qcom_cpufreq_driver);
+	if (unlikely(ret < 0))
+		return ret;
+
+	cpufreq_pdev = platform_device_register_data(NULL, "qcom-cpufreq-nvmem",
+						     -1, match, sizeof(*match));
+	ret = PTR_ERR_OR_ZERO(cpufreq_pdev);
+	if (0 == ret)
+		return 0;
+
+	platform_driver_unregister(&qcom_cpufreq_driver);
+	return ret;
+}
+module_init(qcom_cpufreq_init);
+
+static void __exit qcom_cpufreq_exit(void)
+{
+	platform_device_unregister(cpufreq_pdev);
+	platform_driver_unregister(&qcom_cpufreq_driver);
+}
+module_exit(qcom_cpufreq_exit);
+
+MODULE_DESCRIPTION("Qualcomm Technologies, Inc. CPUfreq driver");
+MODULE_LICENSE("GPL v2");

drivers/cpufreq/sun50i-cpufreq-nvmem.c

@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Allwinner CPUFreq nvmem based driver
+ *
+ * The sun50i-cpufreq-nvmem driver reads the efuse value from the SoC to
+ * provide the OPP framework with required information.
+ *
+ * Copyright (C) 2019 Yangtao Li <tiny.windzz@gmail.com>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/slab.h>
+
+#define MAX_NAME_LEN	7
+
+#define NVMEM_MASK	0x7
+#define NVMEM_SHIFT	5
+
+static struct platform_device *cpufreq_dt_pdev, *sun50i_cpufreq_pdev;
+
+/**
+ * sun50i_cpufreq_get_efuse() - Parse and return efuse value present on SoC
+ * @versions: Set to the value parsed from efuse
+ *
+ * Returns 0 if success.
+ */
+static int sun50i_cpufreq_get_efuse(u32 *versions)
+{
+	struct nvmem_cell *speedbin_nvmem;
+	struct device_node *np;
+	struct device *cpu_dev;
+	u32 *speedbin, efuse_value;
+	size_t len;
+	int ret;
+
+	cpu_dev = get_cpu_device(0);
+	if (!cpu_dev)
+		return -ENODEV;
+
+	np = dev_pm_opp_of_get_opp_desc_node(cpu_dev);
+	if (!np)
+		return -ENOENT;
+
+	ret = of_device_is_compatible(np,
+				      "allwinner,sun50i-h6-operating-points");
+	if (!ret) {
+		of_node_put(np);
+		return -ENOENT;
+	}
+
+	speedbin_nvmem = of_nvmem_cell_get(np, NULL);
+	of_node_put(np);
+	if (IS_ERR(speedbin_nvmem)) {
+		if (PTR_ERR(speedbin_nvmem) != -EPROBE_DEFER)
+			pr_err("Could not get nvmem cell: %ld\n",
+			       PTR_ERR(speedbin_nvmem));
+		return PTR_ERR(speedbin_nvmem);
+	}
+
+	speedbin = nvmem_cell_read(speedbin_nvmem, &len);
+	nvmem_cell_put(speedbin_nvmem);
+	if (IS_ERR(speedbin))
+		return PTR_ERR(speedbin);
+
+	efuse_value = (*speedbin >> NVMEM_SHIFT) & NVMEM_MASK;
+	switch (efuse_value) {
+	case 0b0001:
+		*versions = 1;
+		break;
+	case 0b0011:
+		*versions = 2;
+		break;
+	default:
+		/*
+		 * For other situations, we treat it as bin0.
+		 * This vf table can be run for any good cpu.
+		 */
+		*versions = 0;
+		break;
+	}
+
+	kfree(speedbin);
+	return 0;
+};
+
+static int sun50i_cpufreq_nvmem_probe(struct platform_device *pdev)
+{
+	struct opp_table **opp_tables;
+	char name[MAX_NAME_LEN];
+	unsigned int cpu;
+	u32 speed = 0;
+	int ret;
+
+	opp_tables = kcalloc(num_possible_cpus(), sizeof(*opp_tables),
+			     GFP_KERNEL);
+	if (!opp_tables)
+		return -ENOMEM;
+
+	ret = sun50i_cpufreq_get_efuse(&speed);
+	if (ret)
+		return ret;
+
+	snprintf(name, MAX_NAME_LEN, "speed%d", speed);
+
+	for_each_possible_cpu(cpu) {
+		struct device *cpu_dev = get_cpu_device(cpu);
+
+		if (!cpu_dev) {
+			ret = -ENODEV;
+			goto free_opp;
+		}
+
+		opp_tables[cpu] = dev_pm_opp_set_prop_name(cpu_dev, name);
+		if (IS_ERR(opp_tables[cpu])) {
+			ret = PTR_ERR(opp_tables[cpu]);
+			pr_err("Failed to set prop name\n");
+			goto free_opp;
+		}
+	}
+
+	cpufreq_dt_pdev = platform_device_register_simple("cpufreq-dt", -1,
+							  NULL, 0);
+	if (!IS_ERR(cpufreq_dt_pdev)) {
+		platform_set_drvdata(pdev, opp_tables);
+		return 0;
+	}
+
+	ret = PTR_ERR(cpufreq_dt_pdev);
+	pr_err("Failed to register platform device\n");
+
+free_opp:
+	for_each_possible_cpu(cpu) {
+		if (IS_ERR_OR_NULL(opp_tables[cpu]))
+			break;
+		dev_pm_opp_put_prop_name(opp_tables[cpu]);
+	}
+	kfree(opp_tables);
+
+	return ret;
+}
+
+static int sun50i_cpufreq_nvmem_remove(struct platform_device *pdev)
+{
+	struct opp_table **opp_tables = platform_get_drvdata(pdev);
+	unsigned int cpu;
+
+	platform_device_unregister(cpufreq_dt_pdev);
+
+	for_each_possible_cpu(cpu)
+		dev_pm_opp_put_prop_name(opp_tables[cpu]);
+
+	kfree(opp_tables);
+
+	return 0;
+}
+
+static struct platform_driver sun50i_cpufreq_driver = {
+	.probe = sun50i_cpufreq_nvmem_probe,
+	.remove = sun50i_cpufreq_nvmem_remove,
+	.driver = {
+		.name = "sun50i-cpufreq-nvmem",
+	},
+};
+
+static const struct of_device_id sun50i_cpufreq_match_list[] = {
+	{ .compatible = "allwinner,sun50i-h6" },
+	{}
+};
+
+static const struct of_device_id *sun50i_cpufreq_match_node(void)
+{
+	const struct of_device_id *match;
+	struct device_node *np;
+
+	np = of_find_node_by_path("/");
+	match = of_match_node(sun50i_cpufreq_match_list, np);
+	of_node_put(np);
+
+	return match;
+}
+
+/*
+ * Since the driver depends on nvmem drivers, which may return EPROBE_DEFER,
+ * all the real activity is done in the probe, which may be defered as well.
+ * The init here is only registering the driver and the platform device.
+ */
+static int __init sun50i_cpufreq_init(void)
+{
+	const struct of_device_id *match;
+	int ret;
+
+	match = sun50i_cpufreq_match_node();
+	if (!match)
+		return -ENODEV;
+
+	ret = platform_driver_register(&sun50i_cpufreq_driver);
+	if (unlikely(ret < 0))
+		return ret;
+
+	sun50i_cpufreq_pdev =
+		platform_device_register_simple("sun50i-cpufreq-nvmem",
+						-1, NULL, 0);
+	ret = PTR_ERR_OR_ZERO(sun50i_cpufreq_pdev);
+	if (ret == 0)
+		return 0;
+
+	platform_driver_unregister(&sun50i_cpufreq_driver);
+	return ret;
+}
+module_init(sun50i_cpufreq_init);
+
+static void __exit sun50i_cpufreq_exit(void)
+{
+	platform_device_unregister(sun50i_cpufreq_pdev);
+	platform_driver_unregister(&sun50i_cpufreq_driver);
+}
+module_exit(sun50i_cpufreq_exit);
+
+MODULE_DESCRIPTION("Sun50i-h6 cpufreq driver");
+MODULE_LICENSE("GPL v2");

drivers/cpufreq/ti-cpufreq.c

@@ -77,6 +77,7 @@ static unsigned long dra7_efuse_xlate(struct ti_cpufreq_data *opp_data,
 	case DRA7_EFUSE_HAS_ALL_MPU_OPP:
 	case DRA7_EFUSE_HAS_HIGH_MPU_OPP:
 		calculated_efuse |= DRA7_EFUSE_HIGH_MPU_OPP;
+		/* Fall through */
 	case DRA7_EFUSE_HAS_OD_MPU_OPP:
 		calculated_efuse |= DRA7_EFUSE_OD_MPU_OPP;
 	}

drivers/opp/core.c

@@ -401,6 +401,54 @@ struct dev_pm_opp *dev_pm_opp_find_freq_exact(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_exact);
 
+/**
+ * dev_pm_opp_find_level_exact() - search for an exact level
+ * @dev:		device for which we do this operation
+ * @level:		level to search for
+ *
+ * Return: Searches for exact match in the opp table and returns pointer to the
+ * matching opp if found, else returns ERR_PTR in case of error and should
+ * be handled using IS_ERR. Error return values can be:
+ * EINVAL:	for bad pointer
+ * ERANGE:	no match found for search
+ * ENODEV:	if device not found in list of registered devices
+ *
+ * The callers are required to call dev_pm_opp_put() for the returned OPP after
+ * use.
+ */
+struct dev_pm_opp *dev_pm_opp_find_level_exact(struct device *dev,
+					       unsigned int level)
+{
+	struct opp_table *opp_table;
+	struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE);
+
+	opp_table = _find_opp_table(dev);
+	if (IS_ERR(opp_table)) {
+		int r = PTR_ERR(opp_table);
+
+		dev_err(dev, "%s: OPP table not found (%d)\n", __func__, r);
+		return ERR_PTR(r);
+	}
+
+	mutex_lock(&opp_table->lock);
+
+	list_for_each_entry(temp_opp, &opp_table->opp_list, node) {
+		if (temp_opp->level == level) {
+			opp = temp_opp;
+
+			/* Increment the reference count of OPP */
+			dev_pm_opp_get(opp);
+			break;
+		}
+	}
+
+	mutex_unlock(&opp_table->lock);
+	dev_pm_opp_put_opp_table(opp_table);
+
+	return opp;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_find_level_exact);
+
 static noinline struct dev_pm_opp *_find_freq_ceil(struct opp_table *opp_table,
 						   unsigned long *freq)
 {
@@ -1771,6 +1819,7 @@ static void _opp_detach_genpd(struct opp_table *opp_table)
  * dev_pm_opp_attach_genpd - Attach genpd(s) for the device and save virtual device pointer
  * @dev: Consumer device for which the genpd is getting attached.
  * @names: Null terminated array of pointers containing names of genpd to attach.
+ * @virt_devs: Pointer to return the array of virtual devices.
  *
  * Multiple generic power domains for a device are supported with the help of
  * virtual genpd devices, which are created for each consumer device - genpd
@@ -1784,12 +1833,16 @@ static void _opp_detach_genpd(struct opp_table *opp_table)
  *
  * This helper needs to be called once with a list of all genpd to attach.
  * Otherwise the original device structure will be used instead by the OPP core.
+ *
+ * The order of entries in the names array must match the order in which
+ * "required-opps" are added in DT.
  */
-struct opp_table *dev_pm_opp_attach_genpd(struct device *dev, const char **names)
+struct opp_table *dev_pm_opp_attach_genpd(struct device *dev,
+		const char **names, struct device ***virt_devs)
 {
 	struct opp_table *opp_table;
 	struct device *virt_dev;
-	int index, ret = -EINVAL;
+	int index = 0, ret = -EINVAL;
 	const char **name = names;
 
 	opp_table = dev_pm_opp_get_opp_table(dev);
@@ -1815,14 +1868,6 @@ struct opp_table *dev_pm_opp_attach_genpd(struct device *dev, const char **names
 		goto unlock;
 
 	while (*name) {
-		index = of_property_match_string(dev->of_node,
-						 "power-domain-names", *name);
-		if (index < 0) {
-			dev_err(dev, "Failed to find power domain: %s (%d)\n",
-				*name, index);
-			goto err;
-		}
-
 		if (index >= opp_table->required_opp_count) {
 			dev_err(dev, "Index can't be greater than required-opp-count - 1, %s (%d : %d)\n",
 				*name, opp_table->required_opp_count, index);
@@ -1843,9 +1888,12 @@ struct opp_table *dev_pm_opp_attach_genpd(struct device *dev, const char **names
 		}
 
 		opp_table->genpd_virt_devs[index] = virt_dev;
+		index++;
 		name++;
 	}
 
+	if (virt_devs)
+		*virt_devs = opp_table->genpd_virt_devs;
 	mutex_unlock(&opp_table->genpd_virt_dev_lock);
 
 	return opp_table;

include/linux/pm_opp.h

@@ -96,6 +96,8 @@ unsigned long dev_pm_opp_get_suspend_opp_freq(struct device *dev);
 struct dev_pm_opp *dev_pm_opp_find_freq_exact(struct device *dev,
 					      unsigned long freq,
 					      bool available);
+struct dev_pm_opp *dev_pm_opp_find_level_exact(struct device *dev,
+					       unsigned int level);
 
 struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev,
 					      unsigned long *freq);
@@ -128,7 +130,7 @@ struct opp_table *dev_pm_opp_set_clkname(struct device *dev, const char * name);
 void dev_pm_opp_put_clkname(struct opp_table *opp_table);
 struct opp_table *dev_pm_opp_register_set_opp_helper(struct device *dev, int (*set_opp)(struct dev_pm_set_opp_data *data));
 void dev_pm_opp_unregister_set_opp_helper(struct opp_table *opp_table);
-struct opp_table *dev_pm_opp_attach_genpd(struct device *dev, const char **names);
+struct opp_table *dev_pm_opp_attach_genpd(struct device *dev, const char **names, struct device ***virt_devs);
 void dev_pm_opp_detach_genpd(struct opp_table *opp_table);
 int dev_pm_opp_xlate_performance_state(struct opp_table *src_table, struct opp_table *dst_table, unsigned int pstate);
 int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq);
@@ -200,6 +202,12 @@ static inline struct dev_pm_opp *dev_pm_opp_find_freq_exact(struct device *dev,
 	return ERR_PTR(-ENOTSUPP);
 }
 
+static inline struct dev_pm_opp *dev_pm_opp_find_level_exact(struct device *dev,
+					unsigned int level)
+{
+	return ERR_PTR(-ENOTSUPP);
+}
+
 static inline struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev,
 					unsigned long *freq)
 {
@@ -292,7 +300,7 @@ static inline struct opp_table *dev_pm_opp_set_clkname(struct device *dev, const
 
 static inline void dev_pm_opp_put_clkname(struct opp_table *opp_table) {}
 
-static inline struct opp_table *dev_pm_opp_attach_genpd(struct device *dev, const char **names)
+static inline struct opp_table *dev_pm_opp_attach_genpd(struct device *dev, const char **names, struct device ***virt_devs)
 {
 	return ERR_PTR(-ENOTSUPP);
 }