USB fixes for 4.17-rc3

Here are a number of USB driver fixes for reported problems for
 4.17-rc3.
 
 The "largest" here is a number of phy core changes for reported problems
 with the -rc1 release.  There's also the usual musb and xhci fixes, as
 well as new device id updates.  There are also some usbip fixes for
 reported problems as more people start to use that code with containers.
 
 All of these have been in linux-next with no reported issues, except the
 last few new device ids, which are "obviously correct" :)
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWuM0+g8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynJ0QCfShhVDAuE1neAmu4vF9HFY8eoe3UAn1b71qRn
 UJ5VIrtn1cS0bB3tPwmu
 =sdc6
 -----END PGP SIGNATURE-----

Merge tag 'usb-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a number of USB driver fixes for reported problems for
  4.17-rc3.

  The "largest" here is a number of phy core changes for reported
  problems with the -rc1 release. There's also the usual musb and xhci
  fixes, as well as new device id updates. There are also some usbip
  fixes for reported problems as more people start to use that code with
  containers.

  All of these have been in linux-next with no reported issues, except
  the last few new device ids, which are "obviously correct" :)"

* tag 'usb-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
  USB: musb: dsps: drop duplicate phy initialisation
  USB: musb: host: prevent core phy initialisation
  usb: core: phy: add the SPDX-License-Identifier and include guard
  xhci: Fix Kernel oops in xhci dbgtty
  usb: select USB_COMMON for usb role switch config
  usb: core: phy: add missing forward declaration for "struct device"
  usb: core: phy: make it a no-op if CONFIG_GENERIC_PHY is disabled
  usb: core: use phy_exit during suspend if wake up is not supported
  usb: core: split usb_phy_roothub_{init,alloc}
  usb: core: phy: fix return value of usb_phy_roothub_exit()
  usb: typec: ucsi: Increase command completion timeout value
  Revert "xhci: plat: Register shutdown for xhci_plat"
  usb: core: Add quirk for HP v222w 16GB Mini
  Documentation: typec.rst: Use literal-block element with ascii art
  usb: typec: ucsi: fix tracepoint related build error
  usbip: usbip_event: fix to not print kernel pointer address
  usbip: usbip_host: fix to hold parent lock for device_attach() calls
  usbip: vhci_hcd: Fix usb device and sockfd leaks
  usbip: vhci_hcd: check rhport before using in vhci_hub_control()
  USB: Increment wakeup count on remote wakeup.
  ...

Documentation/devicetree/bindings/usb/usb-xhci.txt

@@ -28,7 +28,10 @@ Required properties:
   - interrupts: one XHCI interrupt should be described here.
 
 Optional properties:
-  - clocks: reference to a clock
+  - clocks: reference to the clocks
+  - clock-names: mandatory if there is a second clock, in this case
+    the name must be "core" for the first clock and "reg" for the
+    second one
   - usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM
   - usb3-lpm-capable: determines if platform is USB3 LPM capable
   - quirk-broken-port-ped: set if the controller has broken port disable mechanism

Documentation/driver-api/usb/typec.rst

@@ -210,7 +210,7 @@ If the connector is dual-role capable, there may also be a switch for the data
 role. USB Type-C Connector Class does not supply separate API for them. The
 port drivers can use USB Role Class API with those.
 
-Illustration of the muxes behind a connector that supports an alternate mode:
+Illustration of the muxes behind a connector that supports an alternate mode::
 
                      ------------------------
                      |       Connector      |

drivers/usb/Kconfig

@@ -207,5 +207,6 @@ config USB_ULPI_BUS
 
 config USB_ROLE_SWITCH
 	tristate
+	select USB_COMMON
 
 endif # USB_SUPPORT

drivers/usb/core/hcd.c

@@ -2262,7 +2262,8 @@ int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg)
 		hcd->state = HC_STATE_SUSPENDED;
 
 		if (!PMSG_IS_AUTO(msg))
-			usb_phy_roothub_power_off(hcd->phy_roothub);
+			usb_phy_roothub_suspend(hcd->self.sysdev,
+						hcd->phy_roothub);
 
 		/* Did we race with a root-hub wakeup event? */
 		if (rhdev->do_remote_wakeup) {
@@ -2302,7 +2303,8 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
 	}
 
 	if (!PMSG_IS_AUTO(msg)) {
-		status = usb_phy_roothub_power_on(hcd->phy_roothub);
+		status = usb_phy_roothub_resume(hcd->self.sysdev,
+						hcd->phy_roothub);
 		if (status)
 			return status;
 	}
@@ -2344,7 +2346,7 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
 		}
 	} else {
 		hcd->state = old_state;
-		usb_phy_roothub_power_off(hcd->phy_roothub);
+		usb_phy_roothub_suspend(hcd->self.sysdev, hcd->phy_roothub);
 		dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
 				"resume", status);
 		if (status != -ESHUTDOWN)
@@ -2377,6 +2379,7 @@ void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
 
 	spin_lock_irqsave (&hcd_root_hub_lock, flags);
 	if (hcd->rh_registered) {
+		pm_wakeup_event(&hcd->self.root_hub->dev, 0);
 		set_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
 		queue_work(pm_wq, &hcd->wakeup_work);
 	}
@@ -2758,12 +2761,16 @@ int usb_add_hcd(struct usb_hcd *hcd,
 	}
 
 	if (!hcd->skip_phy_initialization && usb_hcd_is_primary_hcd(hcd)) {
-		hcd->phy_roothub = usb_phy_roothub_init(hcd->self.sysdev);
+		hcd->phy_roothub = usb_phy_roothub_alloc(hcd->self.sysdev);
 		if (IS_ERR(hcd->phy_roothub)) {
 			retval = PTR_ERR(hcd->phy_roothub);
-			goto err_phy_roothub_init;
+			goto err_phy_roothub_alloc;
 		}
 
+		retval = usb_phy_roothub_init(hcd->phy_roothub);
+		if (retval)
+			goto err_phy_roothub_alloc;
+
 		retval = usb_phy_roothub_power_on(hcd->phy_roothub);
 		if (retval)
 			goto err_usb_phy_roothub_power_on;
@@ -2936,7 +2943,7 @@ err_create_buf:
 	usb_phy_roothub_power_off(hcd->phy_roothub);
 err_usb_phy_roothub_power_on:
 	usb_phy_roothub_exit(hcd->phy_roothub);
-err_phy_roothub_init:
+err_phy_roothub_alloc:
 	if (hcd->remove_phy && hcd->usb_phy) {
 		usb_phy_shutdown(hcd->usb_phy);
 		usb_put_phy(hcd->usb_phy);

drivers/usb/core/hub.c

@@ -653,12 +653,17 @@ void usb_wakeup_notification(struct usb_device *hdev,
 		unsigned int portnum)
 {
 	struct usb_hub *hub;
+	struct usb_port *port_dev;
 
 	if (!hdev)
 		return;
 
 	hub = usb_hub_to_struct_hub(hdev);
 	if (hub) {
+		port_dev = hub->ports[portnum - 1];
+		if (port_dev && port_dev->child)
+			pm_wakeup_event(&port_dev->child->dev, 0);
+
 		set_bit(portnum, hub->wakeup_bits);
 		kick_hub_wq(hub);
 	}
@@ -3434,8 +3439,11 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
 
 	/* Skip the initial Clear-Suspend step for a remote wakeup */
 	status = hub_port_status(hub, port1, &portstatus, &portchange);
-	if (status == 0 && !port_is_suspended(hub, portstatus))
+	if (status == 0 && !port_is_suspended(hub, portstatus)) {
+		if (portchange & USB_PORT_STAT_C_SUSPEND)
+			pm_wakeup_event(&udev->dev, 0);
 		goto SuspendCleared;
+	}
 
 	/* see 7.1.7.7; affects power usage, but not budgeting */
 	if (hub_is_superspeed(hub->hdev))

drivers/usb/core/phy.c

@@ -19,19 +19,6 @@ struct usb_phy_roothub {
 	struct list_head	list;
 };
 
-static struct usb_phy_roothub *usb_phy_roothub_alloc(struct device *dev)
-{
-	struct usb_phy_roothub *roothub_entry;
-
-	roothub_entry = devm_kzalloc(dev, sizeof(*roothub_entry), GFP_KERNEL);
-	if (!roothub_entry)
-		return ERR_PTR(-ENOMEM);
-
-	INIT_LIST_HEAD(&roothub_entry->list);
-
-	return roothub_entry;
-}
-
 static int usb_phy_roothub_add_phy(struct device *dev, int index,
 				   struct list_head *list)
 {
@@ -45,9 +32,11 @@ static int usb_phy_roothub_add_phy(struct device *dev, int index,
 			return PTR_ERR(phy);
 	}
 
-	roothub_entry = usb_phy_roothub_alloc(dev);
-	if (IS_ERR(roothub_entry))
-		return PTR_ERR(roothub_entry);
+	roothub_entry = devm_kzalloc(dev, sizeof(*roothub_entry), GFP_KERNEL);
+	if (!roothub_entry)
+		return -ENOMEM;
+
+	INIT_LIST_HEAD(&roothub_entry->list);
 
 	roothub_entry->phy = phy;
 
@@ -56,28 +45,44 @@ static int usb_phy_roothub_add_phy(struct device *dev, int index,
 	return 0;
 }
 
-struct usb_phy_roothub *usb_phy_roothub_init(struct device *dev)
+struct usb_phy_roothub *usb_phy_roothub_alloc(struct device *dev)
 {
 	struct usb_phy_roothub *phy_roothub;
-	struct usb_phy_roothub *roothub_entry;
-	struct list_head *head;
 	int i, num_phys, err;
 
+	if (!IS_ENABLED(CONFIG_GENERIC_PHY))
+		return NULL;
+
 	num_phys = of_count_phandle_with_args(dev->of_node, "phys",
 					      "#phy-cells");
 	if (num_phys <= 0)
 		return NULL;
 
-	phy_roothub = usb_phy_roothub_alloc(dev);
-	if (IS_ERR(phy_roothub))
-		return phy_roothub;
+	phy_roothub = devm_kzalloc(dev, sizeof(*phy_roothub), GFP_KERNEL);
+	if (!phy_roothub)
+		return ERR_PTR(-ENOMEM);
+
+	INIT_LIST_HEAD(&phy_roothub->list);
 
 	for (i = 0; i < num_phys; i++) {
 		err = usb_phy_roothub_add_phy(dev, i, &phy_roothub->list);
 		if (err)
-			goto err_out;
+			return ERR_PTR(err);
 	}
 
+	return phy_roothub;
+}
+EXPORT_SYMBOL_GPL(usb_phy_roothub_alloc);
+
+int usb_phy_roothub_init(struct usb_phy_roothub *phy_roothub)
+{
+	struct usb_phy_roothub *roothub_entry;
+	struct list_head *head;
+	int err;
+
+	if (!phy_roothub)
+		return 0;
+
 	head = &phy_roothub->list;
 
 	list_for_each_entry(roothub_entry, head, list) {
@@ -86,14 +91,13 @@ struct usb_phy_roothub *usb_phy_roothub_init(struct device *dev)
 			goto err_exit_phys;
 	}
 
-	return phy_roothub;
+	return 0;
 
 err_exit_phys:
 	list_for_each_entry_continue_reverse(roothub_entry, head, list)
 		phy_exit(roothub_entry->phy);
 
-err_out:
-	return ERR_PTR(err);
+	return err;
 }
 EXPORT_SYMBOL_GPL(usb_phy_roothub_init);
 
@@ -111,7 +115,7 @@ int usb_phy_roothub_exit(struct usb_phy_roothub *phy_roothub)
 	list_for_each_entry(roothub_entry, head, list) {
 		err = phy_exit(roothub_entry->phy);
 		if (err)
-			ret = ret;
+			ret = err;
 	}
 
 	return ret;
@@ -156,3 +160,38 @@ void usb_phy_roothub_power_off(struct usb_phy_roothub *phy_roothub)
 		phy_power_off(roothub_entry->phy);
 }
 EXPORT_SYMBOL_GPL(usb_phy_roothub_power_off);
+
+int usb_phy_roothub_suspend(struct device *controller_dev,
+			    struct usb_phy_roothub *phy_roothub)
+{
+	usb_phy_roothub_power_off(phy_roothub);
+
+	/* keep the PHYs initialized so the device can wake up the system */
+	if (device_may_wakeup(controller_dev))
+		return 0;
+
+	return usb_phy_roothub_exit(phy_roothub);
+}
+EXPORT_SYMBOL_GPL(usb_phy_roothub_suspend);
+
+int usb_phy_roothub_resume(struct device *controller_dev,
+			   struct usb_phy_roothub *phy_roothub)
+{
+	int err;
+
+	/* if the device can't wake up the system _exit was called */
+	if (!device_may_wakeup(controller_dev)) {
+		err = usb_phy_roothub_init(phy_roothub);
+		if (err)
+			return err;
+	}
+
+	err = usb_phy_roothub_power_on(phy_roothub);
+
+	/* undo _init if _power_on failed */
+	if (err && !device_may_wakeup(controller_dev))
+		usb_phy_roothub_exit(phy_roothub);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(usb_phy_roothub_resume);

drivers/usb/core/phy.h

@@ -1,7 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * USB roothub wrapper
+ *
+ * Copyright (C) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ */
+
+#ifndef __USB_CORE_PHY_H_
+#define __USB_CORE_PHY_H_
+
+struct device;
 struct usb_phy_roothub;
 
-struct usb_phy_roothub *usb_phy_roothub_init(struct device *dev);
+struct usb_phy_roothub *usb_phy_roothub_alloc(struct device *dev);
+
+int usb_phy_roothub_init(struct usb_phy_roothub *phy_roothub);
 int usb_phy_roothub_exit(struct usb_phy_roothub *phy_roothub);
 
 int usb_phy_roothub_power_on(struct usb_phy_roothub *phy_roothub);
 void usb_phy_roothub_power_off(struct usb_phy_roothub *phy_roothub);
+
+int usb_phy_roothub_suspend(struct device *controller_dev,
+			    struct usb_phy_roothub *phy_roothub);
+int usb_phy_roothub_resume(struct device *controller_dev,
+			   struct usb_phy_roothub *phy_roothub);
+
+#endif /* __USB_CORE_PHY_H_ */

drivers/usb/core/quirks.c

@@ -186,6 +186,9 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x03f0, 0x0701), .driver_info =
 			USB_QUIRK_STRING_FETCH_255 },
 
+	/* HP v222w 16GB Mini USB Drive */
+	{ USB_DEVICE(0x03f0, 0x3f40), .driver_info = USB_QUIRK_DELAY_INIT },
+
 	/* Creative SB Audigy 2 NX */
 	{ USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME },
 

drivers/usb/host/xhci-dbgtty.c

@@ -320,9 +320,11 @@ int xhci_dbc_tty_register_driver(struct xhci_hcd *xhci)
 
 void xhci_dbc_tty_unregister_driver(void)
 {
-	tty_unregister_driver(dbc_tty_driver);
-	put_tty_driver(dbc_tty_driver);
-	dbc_tty_driver = NULL;
+	if (dbc_tty_driver) {
+		tty_unregister_driver(dbc_tty_driver);
+		put_tty_driver(dbc_tty_driver);
+		dbc_tty_driver = NULL;
+	}
 }
 
 static void dbc_rx_push(unsigned long _port)

drivers/usb/host/xhci-pci.c

@@ -126,7 +126,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info())
 		xhci->quirks |= XHCI_AMD_PLL_FIX;
 
-	if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x43bb)
+	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
+		(pdev->device == 0x15e0 ||
+		 pdev->device == 0x15e1 ||
+		 pdev->device == 0x43bb))
 		xhci->quirks |= XHCI_SUSPEND_DELAY;
 
 	if (pdev->vendor == PCI_VENDOR_ID_AMD)

drivers/usb/host/xhci-plat.c

@@ -157,6 +157,7 @@ static int xhci_plat_probe(struct platform_device *pdev)
 	struct resource         *res;
 	struct usb_hcd		*hcd;
 	struct clk              *clk;
+	struct clk              *reg_clk;
 	int			ret;
 	int			irq;
 
@@ -226,17 +227,27 @@ static int xhci_plat_probe(struct platform_device *pdev)
 	hcd->rsrc_len = resource_size(res);
 
 	/*
-	 * Not all platforms have a clk so it is not an error if the
-	 * clock does not exists.
+	 * Not all platforms have clks so it is not an error if the
+	 * clock do not exist.
 	 */
+	reg_clk = devm_clk_get(&pdev->dev, "reg");
+	if (!IS_ERR(reg_clk)) {
+		ret = clk_prepare_enable(reg_clk);
+		if (ret)
+			goto put_hcd;
+	} else if (PTR_ERR(reg_clk) == -EPROBE_DEFER) {
+		ret = -EPROBE_DEFER;
+		goto put_hcd;
+	}
+
 	clk = devm_clk_get(&pdev->dev, NULL);
 	if (!IS_ERR(clk)) {
 		ret = clk_prepare_enable(clk);
 		if (ret)
-			goto put_hcd;
+			goto disable_reg_clk;
 	} else if (PTR_ERR(clk) == -EPROBE_DEFER) {
 		ret = -EPROBE_DEFER;
-		goto put_hcd;
+		goto disable_reg_clk;
 	}
 
 	xhci = hcd_to_xhci(hcd);
@@ -252,6 +263,7 @@ static int xhci_plat_probe(struct platform_device *pdev)
 	device_wakeup_enable(hcd->self.controller);
 
 	xhci->clk = clk;
+	xhci->reg_clk = reg_clk;
 	xhci->main_hcd = hcd;
 	xhci->shared_hcd = __usb_create_hcd(driver, sysdev, &pdev->dev,
 			dev_name(&pdev->dev), hcd);
@@ -320,8 +332,10 @@ put_usb3_hcd:
 	usb_put_hcd(xhci->shared_hcd);
 
 disable_clk:
-	if (!IS_ERR(clk))
-		clk_disable_unprepare(clk);
+	clk_disable_unprepare(clk);
+
+disable_reg_clk:
+	clk_disable_unprepare(reg_clk);
 
 put_hcd:
 	usb_put_hcd(hcd);
@@ -338,6 +352,7 @@ static int xhci_plat_remove(struct platform_device *dev)
 	struct usb_hcd	*hcd = platform_get_drvdata(dev);
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
 	struct clk *clk = xhci->clk;
+	struct clk *reg_clk = xhci->reg_clk;
 
 	xhci->xhc_state |= XHCI_STATE_REMOVING;
 
@@ -347,8 +362,8 @@ static int xhci_plat_remove(struct platform_device *dev)
 	usb_remove_hcd(hcd);
 	usb_put_hcd(xhci->shared_hcd);
 
-	if (!IS_ERR(clk))
-		clk_disable_unprepare(clk);
+	clk_disable_unprepare(clk);
+	clk_disable_unprepare(reg_clk);
 	usb_put_hcd(hcd);
 
 	pm_runtime_set_suspended(&dev->dev);
@@ -420,7 +435,6 @@ MODULE_DEVICE_TABLE(acpi, usb_xhci_acpi_match);
 static struct platform_driver usb_xhci_driver = {
 	.probe	= xhci_plat_probe,
 	.remove	= xhci_plat_remove,
-	.shutdown	= usb_hcd_platform_shutdown,
 	.driver	= {
 		.name = "xhci-hcd",
 		.pm = &xhci_plat_pm_ops,

drivers/usb/host/xhci.h

@@ -1729,8 +1729,9 @@ struct xhci_hcd {
 	int		page_shift;
 	/* msi-x vectors */
 	int		msix_count;
-	/* optional clock */
+	/* optional clocks */
 	struct clk		*clk;
+	struct clk		*reg_clk;
 	/* data structures */
 	struct xhci_device_context_array *dcbaa;
 	struct xhci_ring	*cmd_ring;

drivers/usb/musb/musb_dsps.c

@@ -451,7 +451,6 @@ static int dsps_musb_init(struct musb *musb)
 	if (!rev)
 		return -ENODEV;
 
-	usb_phy_init(musb->xceiv);
 	if (IS_ERR(musb->phy))  {
 		musb->phy = NULL;
 	} else {
@@ -501,7 +500,6 @@ static int dsps_musb_exit(struct musb *musb)
 	struct dsps_glue *glue = dev_get_drvdata(dev->parent);
 
 	del_timer_sync(&musb->dev_timer);
-	usb_phy_shutdown(musb->xceiv);
 	phy_power_off(musb->phy);
 	phy_exit(musb->phy);
 	debugfs_remove_recursive(glue->dbgfs_root);

drivers/usb/musb/musb_host.c

@@ -2754,6 +2754,7 @@ int musb_host_setup(struct musb *musb, int power_budget)
 	hcd->self.otg_port = 1;
 	musb->xceiv->otg->host = &hcd->self;
 	hcd->power_budget = 2 * (power_budget ? : 250);
+	hcd->skip_phy_initialization = 1;
 
 	ret = usb_add_hcd(hcd, 0, 0);
 	if (ret < 0)

drivers/usb/serial/Kconfig

@@ -62,6 +62,7 @@ config USB_SERIAL_SIMPLE
 		- Fundamental Software dongle.
 		- Google USB serial devices
 		- HP4x calculators
+		- Libtransistor USB console
 		- a number of Motorola phones
 		- Motorola Tetra devices
 		- Novatel Wireless GPS receivers

drivers/usb/serial/cp210x.c

@@ -214,6 +214,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
 	{ USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */
 	{ USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */
+	{ USB_DEVICE(0x3923, 0x7A0B) }, /* National Instruments USB Serial Console */
 	{ USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
 	{ } /* Terminating Entry */
 };

drivers/usb/serial/ftdi_sio.c

@@ -1898,7 +1898,8 @@ static int ftdi_8u2232c_probe(struct usb_serial *serial)
 		return ftdi_jtag_probe(serial);
 
 	if (udev->product &&
-		(!strcmp(udev->product, "BeagleBone/XDS100V2") ||
+		(!strcmp(udev->product, "Arrow USB Blaster") ||
+		 !strcmp(udev->product, "BeagleBone/XDS100V2") ||
 		 !strcmp(udev->product, "SNAP Connect E10")))
 		return ftdi_jtag_probe(serial);
 

drivers/usb/serial/usb-serial-simple.c

@@ -63,6 +63,11 @@ DEVICE(flashloader, FLASHLOADER_IDS);
 					0x01) }
 DEVICE(google, GOOGLE_IDS);
 
+/* Libtransistor USB console */
+#define LIBTRANSISTOR_IDS()			\
+	{ USB_DEVICE(0x1209, 0x8b00) }
+DEVICE(libtransistor, LIBTRANSISTOR_IDS);
+
 /* ViVOpay USB Serial Driver */
 #define VIVOPAY_IDS()			\
 	{ USB_DEVICE(0x1d5f, 0x1004) }	/* ViVOpay 8800 */
@@ -110,6 +115,7 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	&funsoft_device,
 	&flashloader_device,
 	&google_device,
+	&libtransistor_device,
 	&vivopay_device,
 	&moto_modem_device,
 	&motorola_tetra_device,
@@ -126,6 +132,7 @@ static const struct usb_device_id id_table[] = {
 	FUNSOFT_IDS(),
 	FLASHLOADER_IDS(),
 	GOOGLE_IDS(),
+	LIBTRANSISTOR_IDS(),
 	VIVOPAY_IDS(),
 	MOTO_IDS(),
 	MOTOROLA_TETRA_IDS(),

drivers/usb/typec/ucsi/Makefile

@@ -5,6 +5,6 @@ obj-$(CONFIG_TYPEC_UCSI)	+= typec_ucsi.o
 
 typec_ucsi-y			:= ucsi.o
 
-typec_ucsi-$(CONFIG_FTRACE)	+= trace.o
+typec_ucsi-$(CONFIG_TRACING)	+= trace.o
 
 obj-$(CONFIG_UCSI_ACPI)		+= ucsi_acpi.o

drivers/usb/typec/ucsi/ucsi.c

@@ -28,7 +28,7 @@
  * difficult to estimate the time it takes for the system to process the command
  * before it is actually passed to the PPM.
  */
-#define UCSI_TIMEOUT_MS		1000
+#define UCSI_TIMEOUT_MS		5000
 
 /*
  * UCSI_SWAP_TIMEOUT_MS - Timeout for role swap requests

drivers/usb/usbip/stub_main.c

@@ -186,7 +186,12 @@ static ssize_t rebind_store(struct device_driver *dev, const char *buf,
 	if (!bid)
 		return -ENODEV;
 
+	/* device_attach() callers should hold parent lock for USB */
+	if (bid->udev->dev.parent)
+		device_lock(bid->udev->dev.parent);
 	ret = device_attach(&bid->udev->dev);
+	if (bid->udev->dev.parent)
+		device_unlock(bid->udev->dev.parent);
 	if (ret < 0) {
 		dev_err(&bid->udev->dev, "rebind failed\n");
 		return ret;

drivers/usb/usbip/usbip_common.h

@@ -243,7 +243,7 @@ enum usbip_side {
 #define	VUDC_EVENT_ERROR_USB	(USBIP_EH_SHUTDOWN | USBIP_EH_UNUSABLE)
 #define	VUDC_EVENT_ERROR_MALLOC	(USBIP_EH_SHUTDOWN | USBIP_EH_UNUSABLE)
 
-#define	VDEV_EVENT_REMOVED	(USBIP_EH_SHUTDOWN | USBIP_EH_BYE)
+#define	VDEV_EVENT_REMOVED (USBIP_EH_SHUTDOWN | USBIP_EH_RESET | USBIP_EH_BYE)
 #define	VDEV_EVENT_DOWN		(USBIP_EH_SHUTDOWN | USBIP_EH_RESET)
 #define	VDEV_EVENT_ERROR_TCP	(USBIP_EH_SHUTDOWN | USBIP_EH_RESET)
 #define	VDEV_EVENT_ERROR_MALLOC	(USBIP_EH_SHUTDOWN | USBIP_EH_UNUSABLE)

drivers/usb/usbip/usbip_event.c

@@ -91,10 +91,6 @@ static void event_handler(struct work_struct *work)
 			unset_event(ud, USBIP_EH_UNUSABLE);
 		}
 
-		/* Stop the error handler. */
-		if (ud->event & USBIP_EH_BYE)
-			usbip_dbg_eh("removed %p\n", ud);
-
 		wake_up(&ud->eh_waitq);
 	}
 }

drivers/usb/usbip/vhci_hcd.c

@@ -354,6 +354,8 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		usbip_dbg_vhci_rh(" ClearHubFeature\n");
 		break;
 	case ClearPortFeature:
+		if (rhport < 0)
+			goto error;
 		switch (wValue) {
 		case USB_PORT_FEAT_SUSPEND:
 			if (hcd->speed == HCD_USB3) {
@@ -511,11 +513,16 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 				goto error;
 			}
 
+			if (rhport < 0)
+				goto error;
+
 			vhci_hcd->port_status[rhport] |= USB_PORT_STAT_SUSPEND;
 			break;
 		case USB_PORT_FEAT_POWER:
 			usbip_dbg_vhci_rh(
 				" SetPortFeature: USB_PORT_FEAT_POWER\n");
+			if (rhport < 0)
+				goto error;
 			if (hcd->speed == HCD_USB3)
 				vhci_hcd->port_status[rhport] |= USB_SS_PORT_STAT_POWER;
 			else
@@ -524,6 +531,8 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		case USB_PORT_FEAT_BH_PORT_RESET:
 			usbip_dbg_vhci_rh(
 				" SetPortFeature: USB_PORT_FEAT_BH_PORT_RESET\n");
+			if (rhport < 0)
+				goto error;
 			/* Applicable only for USB3.0 hub */
 			if (hcd->speed != HCD_USB3) {
 				pr_err("USB_PORT_FEAT_BH_PORT_RESET req not "
@@ -534,6 +543,8 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		case USB_PORT_FEAT_RESET:
 			usbip_dbg_vhci_rh(
 				" SetPortFeature: USB_PORT_FEAT_RESET\n");
+			if (rhport < 0)
+				goto error;
 			/* if it's already enabled, disable */
 			if (hcd->speed == HCD_USB3) {
 				vhci_hcd->port_status[rhport] = 0;
@@ -554,6 +565,8 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		default:
 			usbip_dbg_vhci_rh(" SetPortFeature: default %d\n",
 					  wValue);
+			if (rhport < 0)
+				goto error;
 			if (hcd->speed == HCD_USB3) {
 				if ((vhci_hcd->port_status[rhport] &
 				     USB_SS_PORT_STAT_POWER) != 0) {