Merge master.kernel.org:/home/rmk/linux-2.6-arm

This commit is contained in:
Linus Torvalds 2005-08-03 13:09:43 -07:00
commit 194d0710e1
19 changed files with 337 additions and 484 deletions

View File

@ -104,6 +104,7 @@ logo_*.c
logo_*_clut224.c
logo_*_mono.c
lxdialog
mach-types
mach-types.h
make_times_h
map

View File

@ -61,7 +61,7 @@ static struct plat_serial8250_port coyote_uart_data[] = {
.mapbase = IXP4XX_UART2_BASE_PHYS,
.membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
.irq = IRQ_IXP4XX_UART2,
.flags = UPF_BOOT_AUTOCONF,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = IXP4XX_UART_XTAL,

View File

@ -83,7 +83,7 @@ static struct plat_serial8250_port gtwx5715_uart_platform_data[] = {
.mapbase = IXP4XX_UART2_BASE_PHYS,
.membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
.irq = IRQ_IXP4XX_UART2,
.flags = UPF_BOOT_AUTOCONF,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = IXP4XX_UART_XTAL,

View File

@ -82,7 +82,7 @@ static struct plat_serial8250_port ixdp425_uart_data[] = {
.mapbase = IXP4XX_UART1_BASE_PHYS,
.membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
.irq = IRQ_IXP4XX_UART1,
.flags = UPF_BOOT_AUTOCONF,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = IXP4XX_UART_XTAL,
@ -91,7 +91,7 @@ static struct plat_serial8250_port ixdp425_uart_data[] = {
.mapbase = IXP4XX_UART2_BASE_PHYS,
.membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
.irq = IRQ_IXP4XX_UART1,
.flags = UPF_BOOT_AUTOCONF,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = IXP4XX_UART_XTAL,

View File

@ -30,6 +30,7 @@
* 28-Jun-2005 BJD Moved pm functionality out to common code
* 17-Jul-2005 BJD Changed to platform device for SuperIO 16550s
* 25-Jul-2005 BJD Removed ASIX static mappings
* 27-Jul-2005 BJD Ensure maximum frequency of i2c bus
*/
#include <linux/kernel.h>
@ -60,6 +61,7 @@
#include <asm/arch/regs-mem.h>
#include <asm/arch/regs-lcd.h>
#include <asm/arch/nand.h>
#include <asm/arch/iic.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
@ -304,7 +306,7 @@ static void bast_nand_select(struct s3c2410_nand_set *set, int slot)
}
static struct s3c2410_platform_nand bast_nand_info = {
.tacls = 80,
.tacls = 40,
.twrph0 = 80,
.twrph1 = 80,
.nr_sets = ARRAY_SIZE(bast_nand_sets),
@ -385,6 +387,17 @@ static struct platform_device bast_sio = {
},
};
/* we have devices on the bus which cannot work much over the
* standard 100KHz i2c bus frequency
*/
static struct s3c2410_platform_i2c bast_i2c_info = {
.flags = 0,
.slave_addr = 0x10,
.bus_freq = 100*1000,
.max_freq = 130*1000,
};
/* Standard BAST devices */
static struct platform_device *bast_devices[] __initdata = {
@ -431,6 +444,7 @@ void __init bast_map_io(void)
s3c24xx_uclk.parent = &s3c24xx_clkout1;
s3c_device_nand.dev.platform_data = &bast_nand_info;
s3c_device_i2c.dev.platform_data = &bast_i2c_info;
s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
s3c24xx_init_clocks(0);

View File

@ -370,142 +370,6 @@ ENTRY(cpu_xscale_dcache_clean_area)
bhi 1b
mov pc, lr
/* ================================ CACHE LOCKING============================
*
* The XScale MicroArchitecture implements support for locking entries into
* the data and instruction cache. The following functions implement the core
* low level instructions needed to accomplish the locking. The developer's
* manual states that the code that performs the locking must be in non-cached
* memory. To accomplish this, the code in xscale-cache-lock.c copies the
* following functions from the cache into a non-cached memory region that
* is allocated through consistent_alloc().
*
*/
.align 5
/*
* xscale_icache_lock
*
* r0: starting address to lock
* r1: end address to lock
*/
ENTRY(xscale_icache_lock)
iLockLoop:
bic r0, r0, #CACHELINESIZE - 1
mcr p15, 0, r0, c9, c1, 0 @ lock into cache
cmp r0, r1 @ are we done?
add r0, r0, #CACHELINESIZE @ advance to next cache line
bls iLockLoop
mov pc, lr
/*
* xscale_icache_unlock
*/
ENTRY(xscale_icache_unlock)
mcr p15, 0, r0, c9, c1, 1 @ Unlock icache
mov pc, lr
/*
* xscale_dcache_lock
*
* r0: starting address to lock
* r1: end address to lock
*/
ENTRY(xscale_dcache_lock)
mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
mov r2, #1
mcr p15, 0, r2, c9, c2, 0 @ Put dcache in lock mode
cpwait ip @ Wait for completion
mrs r2, cpsr
orr r3, r2, #PSR_F_BIT | PSR_I_BIT
dLockLoop:
msr cpsr_c, r3
mcr p15, 0, r0, c7, c10, 1 @ Write back line if it is dirty
mcr p15, 0, r0, c7, c6, 1 @ Flush/invalidate line
msr cpsr_c, r2
ldr ip, [r0], #CACHELINESIZE @ Preload 32 bytes into cache from
@ location [r0]. Post-increment
@ r3 to next cache line
cmp r0, r1 @ Are we done?
bls dLockLoop
mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
mov r2, #0
mcr p15, 0, r2, c9, c2, 0 @ Get out of lock mode
cpwait_ret lr, ip
/*
* xscale_dcache_unlock
*/
ENTRY(xscale_dcache_unlock)
mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
mcr p15, 0, ip, c9, c2, 1 @ Unlock cache
mov pc, lr
/*
* Needed to determine the length of the code that needs to be copied.
*/
.align 5
ENTRY(xscale_cache_dummy)
mov pc, lr
/* ================================ TLB LOCKING==============================
*
* The XScale MicroArchitecture implements support for locking entries into
* the Instruction and Data TLBs. The following functions provide the
* low level support for supporting these under Linux. xscale-lock.c
* implements some higher level management code. Most of the following
* is taken straight out of the Developer's Manual.
*/
/*
* Lock I-TLB entry
*
* r0: Virtual address to translate and lock
*/
.align 5
ENTRY(xscale_itlb_lock)
mrs r2, cpsr
orr r3, r2, #PSR_F_BIT | PSR_I_BIT
msr cpsr_c, r3 @ Disable interrupts
mcr p15, 0, r0, c8, c5, 1 @ Invalidate I-TLB entry
mcr p15, 0, r0, c10, c4, 0 @ Translate and lock
msr cpsr_c, r2 @ Restore interrupts
cpwait_ret lr, ip
/*
* Lock D-TLB entry
*
* r0: Virtual address to translate and lock
*/
.align 5
ENTRY(xscale_dtlb_lock)
mrs r2, cpsr
orr r3, r2, #PSR_F_BIT | PSR_I_BIT
msr cpsr_c, r3 @ Disable interrupts
mcr p15, 0, r0, c8, c6, 1 @ Invalidate D-TLB entry
mcr p15, 0, r0, c10, c8, 0 @ Translate and lock
msr cpsr_c, r2 @ Restore interrupts
cpwait_ret lr, ip
/*
* Unlock all I-TLB entries
*/
.align 5
ENTRY(xscale_itlb_unlock)
mcr p15, 0, ip, c10, c4, 1 @ Unlock I-TLB
mcr p15, 0, ip, c8, c5, 0 @ Invalidate I-TLB
cpwait_ret lr, ip
/*
* Unlock all D-TLB entries
*/
ENTRY(xscale_dtlb_unlock)
mcr p15, 0, ip, c10, c8, 1 @ Unlock D-TBL
mcr p15, 0, ip, c8, c6, 0 @ Invalidate D-TLB
cpwait_ret lr, ip
/* =============================== PageTable ============================== */
#define PTE_CACHE_WRITE_ALLOCATE 0

View File

@ -40,17 +40,17 @@ float64 float64_arccos(float64 rFm);
float64 float64_pow(float64 rFn, float64 rFm);
float64 float64_pol(float64 rFn, float64 rFm);
static float64 float64_rsf(float64 rFn, float64 rFm)
static float64 float64_rsf(struct roundingData *roundData, float64 rFn, float64 rFm)
{
return float64_sub(rFm, rFn);
return float64_sub(roundData, rFm, rFn);
}
static float64 float64_rdv(float64 rFn, float64 rFm)
static float64 float64_rdv(struct roundingData *roundData, float64 rFn, float64 rFm)
{
return float64_div(rFm, rFn);
return float64_div(roundData, rFm, rFn);
}
static float64 (*const dyadic_double[16])(float64 rFn, float64 rFm) = {
static float64 (*const dyadic_double[16])(struct roundingData*, float64 rFn, float64 rFm) = {
[ADF_CODE >> 20] = float64_add,
[MUF_CODE >> 20] = float64_mul,
[SUF_CODE >> 20] = float64_sub,
@ -65,12 +65,12 @@ static float64 (*const dyadic_double[16])(float64 rFn, float64 rFm) = {
[FRD_CODE >> 20] = float64_rdv,
};
static float64 float64_mvf(float64 rFm)
static float64 float64_mvf(struct roundingData *roundData,float64 rFm)
{
return rFm;
}
static float64 float64_mnf(float64 rFm)
static float64 float64_mnf(struct roundingData *roundData,float64 rFm)
{
union float64_components u;
@ -84,7 +84,7 @@ static float64 float64_mnf(float64 rFm)
return u.f64;
}
static float64 float64_abs(float64 rFm)
static float64 float64_abs(struct roundingData *roundData,float64 rFm)
{
union float64_components u;
@ -98,7 +98,7 @@ static float64 float64_abs(float64 rFm)
return u.f64;
}
static float64 (*const monadic_double[16])(float64 rFm) = {
static float64 (*const monadic_double[16])(struct roundingData *, float64 rFm) = {
[MVF_CODE >> 20] = float64_mvf,
[MNF_CODE >> 20] = float64_mnf,
[ABS_CODE >> 20] = float64_abs,
@ -108,7 +108,7 @@ static float64 (*const monadic_double[16])(float64 rFm) = {
[NRM_CODE >> 20] = float64_mvf,
};
unsigned int DoubleCPDO(const unsigned int opcode, FPREG * rFd)
unsigned int DoubleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd)
{
FPA11 *fpa11 = GET_FPA11();
float64 rFm;
@ -151,13 +151,13 @@ unsigned int DoubleCPDO(const unsigned int opcode, FPREG * rFd)
}
if (dyadic_double[opc_mask_shift]) {
rFd->fDouble = dyadic_double[opc_mask_shift](rFn, rFm);
rFd->fDouble = dyadic_double[opc_mask_shift](roundData, rFn, rFm);
} else {
return 0;
}
} else {
if (monadic_double[opc_mask_shift]) {
rFd->fDouble = monadic_double[opc_mask_shift](rFm);
rFd->fDouble = monadic_double[opc_mask_shift](roundData, rFm);
} else {
return 0;
}

View File

@ -35,17 +35,17 @@ floatx80 floatx80_arccos(floatx80 rFm);
floatx80 floatx80_pow(floatx80 rFn, floatx80 rFm);
floatx80 floatx80_pol(floatx80 rFn, floatx80 rFm);
static floatx80 floatx80_rsf(floatx80 rFn, floatx80 rFm)
static floatx80 floatx80_rsf(struct roundingData *roundData, floatx80 rFn, floatx80 rFm)
{
return floatx80_sub(rFm, rFn);
return floatx80_sub(roundData, rFm, rFn);
}
static floatx80 floatx80_rdv(floatx80 rFn, floatx80 rFm)
static floatx80 floatx80_rdv(struct roundingData *roundData, floatx80 rFn, floatx80 rFm)
{
return floatx80_div(rFm, rFn);
return floatx80_div(roundData, rFm, rFn);
}
static floatx80 (*const dyadic_extended[16])(floatx80 rFn, floatx80 rFm) = {
static floatx80 (*const dyadic_extended[16])(struct roundingData*, floatx80 rFn, floatx80 rFm) = {
[ADF_CODE >> 20] = floatx80_add,
[MUF_CODE >> 20] = floatx80_mul,
[SUF_CODE >> 20] = floatx80_sub,
@ -60,24 +60,24 @@ static floatx80 (*const dyadic_extended[16])(floatx80 rFn, floatx80 rFm) = {
[FRD_CODE >> 20] = floatx80_rdv,
};
static floatx80 floatx80_mvf(floatx80 rFm)
static floatx80 floatx80_mvf(struct roundingData *roundData, floatx80 rFm)
{
return rFm;
}
static floatx80 floatx80_mnf(floatx80 rFm)
static floatx80 floatx80_mnf(struct roundingData *roundData, floatx80 rFm)
{
rFm.high ^= 0x8000;
return rFm;
}
static floatx80 floatx80_abs(floatx80 rFm)
static floatx80 floatx80_abs(struct roundingData *roundData, floatx80 rFm)
{
rFm.high &= 0x7fff;
return rFm;
}
static floatx80 (*const monadic_extended[16])(floatx80 rFm) = {
static floatx80 (*const monadic_extended[16])(struct roundingData*, floatx80 rFm) = {
[MVF_CODE >> 20] = floatx80_mvf,
[MNF_CODE >> 20] = floatx80_mnf,
[ABS_CODE >> 20] = floatx80_abs,
@ -87,7 +87,7 @@ static floatx80 (*const monadic_extended[16])(floatx80 rFm) = {
[NRM_CODE >> 20] = floatx80_mvf,
};
unsigned int ExtendedCPDO(const unsigned int opcode, FPREG * rFd)
unsigned int ExtendedCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd)
{
FPA11 *fpa11 = GET_FPA11();
floatx80 rFm;
@ -138,13 +138,13 @@ unsigned int ExtendedCPDO(const unsigned int opcode, FPREG * rFd)
}
if (dyadic_extended[opc_mask_shift]) {
rFd->fExtended = dyadic_extended[opc_mask_shift](rFn, rFm);
rFd->fExtended = dyadic_extended[opc_mask_shift](roundData, rFn, rFm);
} else {
return 0;
}
} else {
if (monadic_extended[opc_mask_shift]) {
rFd->fExtended = monadic_extended[opc_mask_shift](rFm);
rFd->fExtended = monadic_extended[opc_mask_shift](roundData, rFm);
} else {
return 0;
}

View File

@ -51,48 +51,42 @@ static void resetFPA11(void)
fpa11->fpsr = FP_EMULATOR | BIT_AC;
}
void SetRoundingMode(const unsigned int opcode)
int8 SetRoundingMode(const unsigned int opcode)
{
switch (opcode & MASK_ROUNDING_MODE) {
default:
case ROUND_TO_NEAREST:
float_rounding_mode = float_round_nearest_even;
break;
return float_round_nearest_even;
case ROUND_TO_PLUS_INFINITY:
float_rounding_mode = float_round_up;
break;
return float_round_up;
case ROUND_TO_MINUS_INFINITY:
float_rounding_mode = float_round_down;
break;
return float_round_down;
case ROUND_TO_ZERO:
float_rounding_mode = float_round_to_zero;
break;
return float_round_to_zero;
}
}
void SetRoundingPrecision(const unsigned int opcode)
int8 SetRoundingPrecision(const unsigned int opcode)
{
#ifdef CONFIG_FPE_NWFPE_XP
switch (opcode & MASK_ROUNDING_PRECISION) {
case ROUND_SINGLE:
floatx80_rounding_precision = 32;
break;
return 32;
case ROUND_DOUBLE:
floatx80_rounding_precision = 64;
break;
return 64;
case ROUND_EXTENDED:
floatx80_rounding_precision = 80;
break;
return 80;
default:
floatx80_rounding_precision = 80;
return 80;
}
#endif
return 80;
}
void nwfpe_init_fpa(union fp_state *fp)
@ -103,8 +97,6 @@ void nwfpe_init_fpa(union fp_state *fp)
#endif
memset(fpa11, 0, sizeof(FPA11));
resetFPA11();
SetRoundingMode(ROUND_TO_NEAREST);
SetRoundingPrecision(ROUND_EXTENDED);
fpa11->initflag = 1;
}

View File

@ -37,6 +37,13 @@
/* includes */
#include "fpsr.h" /* FP control and status register definitions */
#include "milieu.h"
struct roundingData {
int8 mode;
int8 precision;
signed char exception;
};
#include "softfloat.h"
#define typeNone 0x00
@ -84,8 +91,8 @@ typedef struct tagFPA11 {
initialised. */
} FPA11;
extern void SetRoundingMode(const unsigned int);
extern void SetRoundingPrecision(const unsigned int);
extern int8 SetRoundingMode(const unsigned int);
extern int8 SetRoundingPrecision(const unsigned int);
extern void nwfpe_init_fpa(union fp_state *fp);
#endif

View File

@ -24,15 +24,16 @@
#include "fpa11.h"
#include "fpopcode.h"
unsigned int SingleCPDO(const unsigned int opcode, FPREG * rFd);
unsigned int DoubleCPDO(const unsigned int opcode, FPREG * rFd);
unsigned int ExtendedCPDO(const unsigned int opcode, FPREG * rFd);
unsigned int SingleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd);
unsigned int DoubleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd);
unsigned int ExtendedCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd);
unsigned int EmulateCPDO(const unsigned int opcode)
{
FPA11 *fpa11 = GET_FPA11();
FPREG *rFd;
unsigned int nType, nDest, nRc;
struct roundingData roundData;
/* Get the destination size. If not valid let Linux perform
an invalid instruction trap. */
@ -40,7 +41,9 @@ unsigned int EmulateCPDO(const unsigned int opcode)
if (typeNone == nDest)
return 0;
SetRoundingMode(opcode);
roundData.mode = SetRoundingMode(opcode);
roundData.precision = SetRoundingPrecision(opcode);
roundData.exception = 0;
/* Compare the size of the operands in Fn and Fm.
Choose the largest size and perform operations in that size,
@ -63,14 +66,14 @@ unsigned int EmulateCPDO(const unsigned int opcode)
switch (nType) {
case typeSingle:
nRc = SingleCPDO(opcode, rFd);
nRc = SingleCPDO(&roundData, opcode, rFd);
break;
case typeDouble:
nRc = DoubleCPDO(opcode, rFd);
nRc = DoubleCPDO(&roundData, opcode, rFd);
break;
#ifdef CONFIG_FPE_NWFPE_XP
case typeExtended:
nRc = ExtendedCPDO(opcode, rFd);
nRc = ExtendedCPDO(&roundData, opcode, rFd);
break;
#endif
default:
@ -93,9 +96,9 @@ unsigned int EmulateCPDO(const unsigned int opcode)
case typeSingle:
{
if (typeDouble == nType)
rFd->fSingle = float64_to_float32(rFd->fDouble);
rFd->fSingle = float64_to_float32(&roundData, rFd->fDouble);
else
rFd->fSingle = floatx80_to_float32(rFd->fExtended);
rFd->fSingle = floatx80_to_float32(&roundData, rFd->fExtended);
}
break;
@ -104,7 +107,7 @@ unsigned int EmulateCPDO(const unsigned int opcode)
if (typeSingle == nType)
rFd->fDouble = float32_to_float64(rFd->fSingle);
else
rFd->fDouble = floatx80_to_float64(rFd->fExtended);
rFd->fDouble = floatx80_to_float64(&roundData, rFd->fExtended);
}
break;
@ -121,12 +124,15 @@ unsigned int EmulateCPDO(const unsigned int opcode)
#else
if (nDest != nType) {
if (nDest == typeSingle)
rFd->fSingle = float64_to_float32(rFd->fDouble);
rFd->fSingle = float64_to_float32(&roundData, rFd->fDouble);
else
rFd->fDouble = float32_to_float64(rFd->fSingle);
}
#endif
}
if (roundData.exception)
float_raise(roundData.exception);
return nRc;
}

View File

@ -96,7 +96,7 @@ static inline void loadMultiple(const unsigned int Fn, const unsigned int __user
}
}
static inline void storeSingle(const unsigned int Fn, unsigned int __user *pMem)
static inline void storeSingle(struct roundingData *roundData, const unsigned int Fn, unsigned int __user *pMem)
{
FPA11 *fpa11 = GET_FPA11();
union {
@ -106,12 +106,12 @@ static inline void storeSingle(const unsigned int Fn, unsigned int __user *pMem)
switch (fpa11->fType[Fn]) {
case typeDouble:
val.f = float64_to_float32(fpa11->fpreg[Fn].fDouble);
val.f = float64_to_float32(roundData, fpa11->fpreg[Fn].fDouble);
break;
#ifdef CONFIG_FPE_NWFPE_XP
case typeExtended:
val.f = floatx80_to_float32(fpa11->fpreg[Fn].fExtended);
val.f = floatx80_to_float32(roundData, fpa11->fpreg[Fn].fExtended);
break;
#endif
@ -122,7 +122,7 @@ static inline void storeSingle(const unsigned int Fn, unsigned int __user *pMem)
put_user(val.i[0], pMem);
}
static inline void storeDouble(const unsigned int Fn, unsigned int __user *pMem)
static inline void storeDouble(struct roundingData *roundData, const unsigned int Fn, unsigned int __user *pMem)
{
FPA11 *fpa11 = GET_FPA11();
union {
@ -137,7 +137,7 @@ static inline void storeDouble(const unsigned int Fn, unsigned int __user *pMem)
#ifdef CONFIG_FPE_NWFPE_XP
case typeExtended:
val.f = floatx80_to_float64(fpa11->fpreg[Fn].fExtended);
val.f = floatx80_to_float64(roundData, fpa11->fpreg[Fn].fExtended);
break;
#endif
@ -259,8 +259,11 @@ unsigned int PerformSTF(const unsigned int opcode)
{
unsigned int __user *pBase, *pAddress, *pFinal;
unsigned int nRc = 1, write_back = WRITE_BACK(opcode);
struct roundingData roundData;
SetRoundingMode(ROUND_TO_NEAREST);
roundData.mode = SetRoundingMode(opcode);
roundData.precision = SetRoundingPrecision(opcode);
roundData.exception = 0;
pBase = (unsigned int __user *) readRegister(getRn(opcode));
if (REG_PC == getRn(opcode)) {
@ -281,10 +284,10 @@ unsigned int PerformSTF(const unsigned int opcode)
switch (opcode & MASK_TRANSFER_LENGTH) {
case TRANSFER_SINGLE:
storeSingle(getFd(opcode), pAddress);
storeSingle(&roundData, getFd(opcode), pAddress);
break;
case TRANSFER_DOUBLE:
storeDouble(getFd(opcode), pAddress);
storeDouble(&roundData, getFd(opcode), pAddress);
break;
#ifdef CONFIG_FPE_NWFPE_XP
case TRANSFER_EXTENDED:
@ -295,6 +298,9 @@ unsigned int PerformSTF(const unsigned int opcode)
nRc = 0;
}
if (roundData.exception)
float_raise(roundData.exception);
if (write_back)
writeRegister(getRn(opcode), (unsigned long) pFinal);
return nRc;

View File

@ -33,8 +33,6 @@ extern flag floatx80_is_nan(floatx80);
extern flag float64_is_nan(float64);
extern flag float32_is_nan(float32);
void SetRoundingMode(const unsigned int opcode);
unsigned int PerformFLT(const unsigned int opcode);
unsigned int PerformFIX(const unsigned int opcode);
@ -77,14 +75,17 @@ unsigned int EmulateCPRT(const unsigned int opcode)
unsigned int PerformFLT(const unsigned int opcode)
{
FPA11 *fpa11 = GET_FPA11();
SetRoundingMode(opcode);
SetRoundingPrecision(opcode);
struct roundingData roundData;
roundData.mode = SetRoundingMode(opcode);
roundData.precision = SetRoundingPrecision(opcode);
roundData.exception = 0;
switch (opcode & MASK_ROUNDING_PRECISION) {
case ROUND_SINGLE:
{
fpa11->fType[getFn(opcode)] = typeSingle;
fpa11->fpreg[getFn(opcode)].fSingle = int32_to_float32(readRegister(getRd(opcode)));
fpa11->fpreg[getFn(opcode)].fSingle = int32_to_float32(&roundData, readRegister(getRd(opcode)));
}
break;
@ -108,6 +109,9 @@ unsigned int PerformFLT(const unsigned int opcode)
return 0;
}
if (roundData.exception)
float_raise(roundData.exception);
return 1;
}
@ -115,26 +119,29 @@ unsigned int PerformFIX(const unsigned int opcode)
{
FPA11 *fpa11 = GET_FPA11();
unsigned int Fn = getFm(opcode);
struct roundingData roundData;
SetRoundingMode(opcode);
roundData.mode = SetRoundingMode(opcode);
roundData.precision = SetRoundingPrecision(opcode);
roundData.exception = 0;
switch (fpa11->fType[Fn]) {
case typeSingle:
{
writeRegister(getRd(opcode), float32_to_int32(fpa11->fpreg[Fn].fSingle));
writeRegister(getRd(opcode), float32_to_int32(&roundData, fpa11->fpreg[Fn].fSingle));
}
break;
case typeDouble:
{
writeRegister(getRd(opcode), float64_to_int32(fpa11->fpreg[Fn].fDouble));
writeRegister(getRd(opcode), float64_to_int32(&roundData, fpa11->fpreg[Fn].fDouble));
}
break;
#ifdef CONFIG_FPE_NWFPE_XP
case typeExtended:
{
writeRegister(getRd(opcode), floatx80_to_int32(fpa11->fpreg[Fn].fExtended));
writeRegister(getRd(opcode), floatx80_to_int32(&roundData, fpa11->fpreg[Fn].fExtended));
}
break;
#endif
@ -143,6 +150,9 @@ unsigned int PerformFIX(const unsigned int opcode)
return 0;
}
if (roundData.exception)
float_raise(roundData.exception);
return 1;
}

View File

@ -116,8 +116,6 @@ fpmodule.c to integrate with the NetBSD kernel (I hope!).
code to access data in user space in some other source files at the
moment (grep for get_user / put_user calls). --philb]
float_exception_flags is a global variable in SoftFloat.
This function is called by the SoftFloat routines to raise a floating
point exception. We check the trap enable byte in the FPSR, and raise
a SIGFPE exception if necessary. If not the relevant bits in the
@ -129,15 +127,14 @@ void float_raise(signed char flags)
register unsigned int fpsr, cumulativeTraps;
#ifdef CONFIG_DEBUG_USER
printk(KERN_DEBUG
"NWFPE: %s[%d] takes exception %08x at %p from %08lx\n",
current->comm, current->pid, flags,
__builtin_return_address(0), GET_USERREG()->ARM_pc);
/* Ignore inexact errors as there are far too many of them to log */
if (flags & ~BIT_IXC)
printk(KERN_DEBUG
"NWFPE: %s[%d] takes exception %08x at %p from %08lx\n",
current->comm, current->pid, flags,
__builtin_return_address(0), GET_USERREG()->ARM_pc);
#endif
/* Keep SoftFloat exception flags up to date. */
float_exception_flags |= flags;
/* Read fpsr and initialize the cumulativeTraps. */
fpsr = readFPSR();
cumulativeTraps = 0;

View File

@ -36,17 +36,17 @@ float32 float32_arccos(float32 rFm);
float32 float32_pow(float32 rFn, float32 rFm);
float32 float32_pol(float32 rFn, float32 rFm);
static float32 float32_rsf(float32 rFn, float32 rFm)
static float32 float32_rsf(struct roundingData *roundData, float32 rFn, float32 rFm)
{
return float32_sub(rFm, rFn);
return float32_sub(roundData, rFm, rFn);
}
static float32 float32_rdv(float32 rFn, float32 rFm)
static float32 float32_rdv(struct roundingData *roundData, float32 rFn, float32 rFm)
{
return float32_div(rFm, rFn);
return float32_div(roundData, rFm, rFn);
}
static float32 (*const dyadic_single[16])(float32 rFn, float32 rFm) = {
static float32 (*const dyadic_single[16])(struct roundingData *, float32 rFn, float32 rFm) = {
[ADF_CODE >> 20] = float32_add,
[MUF_CODE >> 20] = float32_mul,
[SUF_CODE >> 20] = float32_sub,
@ -60,22 +60,22 @@ static float32 (*const dyadic_single[16])(float32 rFn, float32 rFm) = {
[FRD_CODE >> 20] = float32_rdv,
};
static float32 float32_mvf(float32 rFm)
static float32 float32_mvf(struct roundingData *roundData, float32 rFm)
{
return rFm;
}
static float32 float32_mnf(float32 rFm)
static float32 float32_mnf(struct roundingData *roundData, float32 rFm)
{
return rFm ^ 0x80000000;
}
static float32 float32_abs(float32 rFm)
static float32 float32_abs(struct roundingData *roundData, float32 rFm)
{
return rFm & 0x7fffffff;
}
static float32 (*const monadic_single[16])(float32 rFm) = {
static float32 (*const monadic_single[16])(struct roundingData*, float32 rFm) = {
[MVF_CODE >> 20] = float32_mvf,
[MNF_CODE >> 20] = float32_mnf,
[ABS_CODE >> 20] = float32_abs,
@ -85,7 +85,7 @@ static float32 (*const monadic_single[16])(float32 rFm) = {
[NRM_CODE >> 20] = float32_mvf,
};
unsigned int SingleCPDO(const unsigned int opcode, FPREG * rFd)
unsigned int SingleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd)
{
FPA11 *fpa11 = GET_FPA11();
float32 rFm;
@ -108,13 +108,13 @@ unsigned int SingleCPDO(const unsigned int opcode, FPREG * rFd)
if (fpa11->fType[Fn] == typeSingle &&
dyadic_single[opc_mask_shift]) {
rFn = fpa11->fpreg[Fn].fSingle;
rFd->fSingle = dyadic_single[opc_mask_shift](rFn, rFm);
rFd->fSingle = dyadic_single[opc_mask_shift](roundData, rFn, rFm);
} else {
return 0;
}
} else {
if (monadic_single[opc_mask_shift]) {
rFd->fSingle = monadic_single[opc_mask_shift](rFm);
rFd->fSingle = monadic_single[opc_mask_shift](roundData, rFm);
} else {
return 0;
}

File diff suppressed because it is too large Load Diff

View File

@ -74,7 +74,7 @@ enum {
Software IEC/IEEE floating-point rounding mode.
-------------------------------------------------------------------------------
*/
extern signed char float_rounding_mode;
//extern int8 float_rounding_mode;
enum {
float_round_nearest_even = 0,
float_round_to_zero = 1,
@ -86,7 +86,6 @@ enum {
-------------------------------------------------------------------------------
Software IEC/IEEE floating-point exception flags.
-------------------------------------------------------------------------------
extern signed char float_exception_flags;
enum {
float_flag_inexact = 1,
float_flag_underflow = 2,
@ -99,7 +98,6 @@ ScottB: November 4, 1998
Changed the enumeration to match the bit order in the FPA11.
*/
extern signed char float_exception_flags;
enum {
float_flag_invalid = 1,
float_flag_divbyzero = 2,
@ -121,7 +119,7 @@ void float_raise( signed char );
Software IEC/IEEE integer-to-floating-point conversion routines.
-------------------------------------------------------------------------------
*/
float32 int32_to_float32( signed int );
float32 int32_to_float32( struct roundingData *, signed int );
float64 int32_to_float64( signed int );
#ifdef FLOATX80
floatx80 int32_to_floatx80( signed int );
@ -132,7 +130,7 @@ floatx80 int32_to_floatx80( signed int );
Software IEC/IEEE single-precision conversion routines.
-------------------------------------------------------------------------------
*/
signed int float32_to_int32( float32 );
signed int float32_to_int32( struct roundingData *, float32 );
signed int float32_to_int32_round_to_zero( float32 );
float64 float32_to_float64( float32 );
#ifdef FLOATX80
@ -144,13 +142,13 @@ floatx80 float32_to_floatx80( float32 );
Software IEC/IEEE single-precision operations.
-------------------------------------------------------------------------------
*/
float32 float32_round_to_int( float32 );
float32 float32_add( float32, float32 );
float32 float32_sub( float32, float32 );
float32 float32_mul( float32, float32 );
float32 float32_div( float32, float32 );
float32 float32_rem( float32, float32 );
float32 float32_sqrt( float32 );
float32 float32_round_to_int( struct roundingData*, float32 );
float32 float32_add( struct roundingData *, float32, float32 );
float32 float32_sub( struct roundingData *, float32, float32 );
float32 float32_mul( struct roundingData *, float32, float32 );
float32 float32_div( struct roundingData *, float32, float32 );
float32 float32_rem( struct roundingData *, float32, float32 );
float32 float32_sqrt( struct roundingData*, float32 );
char float32_eq( float32, float32 );
char float32_le( float32, float32 );
char float32_lt( float32, float32 );
@ -164,9 +162,9 @@ char float32_is_signaling_nan( float32 );
Software IEC/IEEE double-precision conversion routines.
-------------------------------------------------------------------------------
*/
signed int float64_to_int32( float64 );
signed int float64_to_int32( struct roundingData *, float64 );
signed int float64_to_int32_round_to_zero( float64 );
float32 float64_to_float32( float64 );
float32 float64_to_float32( struct roundingData *, float64 );
#ifdef FLOATX80
floatx80 float64_to_floatx80( float64 );
#endif
@ -176,13 +174,13 @@ floatx80 float64_to_floatx80( float64 );
Software IEC/IEEE double-precision operations.
-------------------------------------------------------------------------------
*/
float64 float64_round_to_int( float64 );
float64 float64_add( float64, float64 );
float64 float64_sub( float64, float64 );
float64 float64_mul( float64, float64 );
float64 float64_div( float64, float64 );
float64 float64_rem( float64, float64 );
float64 float64_sqrt( float64 );
float64 float64_round_to_int( struct roundingData *, float64 );
float64 float64_add( struct roundingData *, float64, float64 );
float64 float64_sub( struct roundingData *, float64, float64 );
float64 float64_mul( struct roundingData *, float64, float64 );
float64 float64_div( struct roundingData *, float64, float64 );
float64 float64_rem( struct roundingData *, float64, float64 );
float64 float64_sqrt( struct roundingData *, float64 );
char float64_eq( float64, float64 );
char float64_le( float64, float64 );
char float64_lt( float64, float64 );
@ -198,31 +196,23 @@ char float64_is_signaling_nan( float64 );
Software IEC/IEEE extended double-precision conversion routines.
-------------------------------------------------------------------------------
*/
signed int floatx80_to_int32( floatx80 );
signed int floatx80_to_int32( struct roundingData *, floatx80 );
signed int floatx80_to_int32_round_to_zero( floatx80 );
float32 floatx80_to_float32( floatx80 );
float64 floatx80_to_float64( floatx80 );
/*
-------------------------------------------------------------------------------
Software IEC/IEEE extended double-precision rounding precision. Valid
values are 32, 64, and 80.
-------------------------------------------------------------------------------
*/
extern signed char floatx80_rounding_precision;
float32 floatx80_to_float32( struct roundingData *, floatx80 );
float64 floatx80_to_float64( struct roundingData *, floatx80 );
/*
-------------------------------------------------------------------------------
Software IEC/IEEE extended double-precision operations.
-------------------------------------------------------------------------------
*/
floatx80 floatx80_round_to_int( floatx80 );
floatx80 floatx80_add( floatx80, floatx80 );
floatx80 floatx80_sub( floatx80, floatx80 );
floatx80 floatx80_mul( floatx80, floatx80 );
floatx80 floatx80_div( floatx80, floatx80 );
floatx80 floatx80_rem( floatx80, floatx80 );
floatx80 floatx80_sqrt( floatx80 );
floatx80 floatx80_round_to_int( struct roundingData *, floatx80 );
floatx80 floatx80_add( struct roundingData *, floatx80, floatx80 );
floatx80 floatx80_sub( struct roundingData *, floatx80, floatx80 );
floatx80 floatx80_mul( struct roundingData *, floatx80, floatx80 );
floatx80 floatx80_div( struct roundingData *, floatx80, floatx80 );
floatx80 floatx80_rem( struct roundingData *, floatx80, floatx80 );
floatx80 floatx80_sqrt( struct roundingData *, floatx80 );
char floatx80_eq( floatx80, floatx80 );
char floatx80_le( floatx80, floatx80 );
char floatx80_lt( floatx80, floatx80 );

View File

@ -770,6 +770,9 @@ vfp_double_add(struct vfp_double *vdd, struct vfp_double *vdn,
if ((s64)m_sig < 0) {
vdd->sign = vfp_sign_negate(vdd->sign);
m_sig = -m_sig;
} else if (m_sig == 0) {
vdd->sign = (fpscr & FPSCR_RMODE_MASK) ==
FPSCR_ROUND_MINUSINF ? 0x8000 : 0;
}
} else {
m_sig += vdn->significand;

View File

@ -36,13 +36,10 @@
#include <asm/uaccess.h>
#define OSCR_FREQ CLOCK_TICK_RATE
#define SA1100_CLOSE_MAGIC (0x5afc4453)
static unsigned long sa1100wdt_users;
static int expect_close;
static int pre_margin;
static int boot_status;
static int nowayout = WATCHDOG_NOWAYOUT;
/*
* Allow only one person to hold it open
@ -62,55 +59,33 @@ static int sa1100dog_open(struct inode *inode, struct file *file)
}
/*
* Shut off the timer.
* Lock it in if it's a module and we defined ...NOWAYOUT
* Oddly, the watchdog can only be enabled, but we can turn off
* the interrupt, which appears to prevent the watchdog timing out.
* The watchdog cannot be disabled.
*
* Previous comments suggested that turning off the interrupt by
* clearing OIER[E3] would prevent the watchdog timing out but this
* does not appear to be true (at least on the PXA255).
*/
static int sa1100dog_release(struct inode *inode, struct file *file)
{
OSMR3 = OSCR + pre_margin;
if (expect_close == SA1100_CLOSE_MAGIC) {
OIER &= ~OIER_E3;
} else {
printk(KERN_CRIT "WATCHDOG: WDT device closed unexpectedly. WDT will not stop!\n");
}
printk(KERN_CRIT "WATCHDOG: Device closed - timer will not stop\n");
clear_bit(1, &sa1100wdt_users);
expect_close = 0;
return 0;
}
static ssize_t sa1100dog_write(struct file *file, const char *data, size_t len, loff_t *ppos)
{
if (len) {
if (!nowayout) {
size_t i;
expect_close = 0;
for (i = 0; i != len; i++) {
char c;
if (get_user(c, data + i))
return -EFAULT;
if (c == 'V')
expect_close = SA1100_CLOSE_MAGIC;
}
}
if (len)
/* Refresh OSMR3 timer. */
OSMR3 = OSCR + pre_margin;
}
return len;
}
static struct watchdog_info ident = {
.options = WDIOF_CARDRESET | WDIOF_MAGICCLOSE |
WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
.identity = "SA1100 Watchdog",
.options = WDIOF_CARDRESET | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
.identity = "SA1100/PXA255 Watchdog",
};
static int sa1100dog_ioctl(struct inode *inode, struct file *file,
@ -172,7 +147,7 @@ static struct file_operations sa1100dog_fops =
static struct miscdevice sa1100dog_miscdev =
{
.minor = WATCHDOG_MINOR,
.name = "SA1100/PXA2xx watchdog",
.name = "watchdog",
.fops = &sa1100dog_fops,
};
@ -194,7 +169,6 @@ static int __init sa1100dog_init(void)
if (ret == 0)
printk("SA1100/PXA2xx Watchdog Timer: timer margin %d sec\n",
margin);
return ret;
}
@ -212,8 +186,5 @@ MODULE_DESCRIPTION("SA1100/PXA2xx Watchdog");
module_param(margin, int, 0);
MODULE_PARM_DESC(margin, "Watchdog margin in seconds (default 60s)");
module_param(nowayout, int, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);