forked from Minki/linux
Merge remote-tracking branch 'regulator/topic/s5m8767' into regulator-next
This commit is contained in:
Mark Brown
commit
178a097d5e
@ -0,0 +1,152 @@
|
||||
* Samsung S5M8767 Voltage and Current Regulator
|
||||
|
||||
The Samsung S5M8767 is a multi-function device which includes volatage and
|
||||
current regulators, rtc, charger controller and other sub-blocks. It is
|
||||
interfaced to the host controller using a i2c interface. Each sub-block is
|
||||
addressed by the host system using different i2c slave address. This document
|
||||
describes the bindings for 'pmic' sub-block of s5m8767.
|
||||
|
||||
Required properties:
|
||||
- compatible: Should be "samsung,s5m8767-pmic".
|
||||
- reg: Specifies the i2c slave address of the pmic block. It should be 0x66.
|
||||
|
||||
- s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
|
||||
units for buck2 when changing voltage using gpio dvs. Refer to [1] below
|
||||
for additional information.
|
||||
|
||||
- s5m8767,pmic-buck3-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
|
||||
units for buck3 when changing voltage using gpio dvs. Refer to [1] below
|
||||
for additional information.
|
||||
|
||||
- s5m8767,pmic-buck4-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
|
||||
units for buck4 when changing voltage using gpio dvs. Refer to [1] below
|
||||
for additional information.
|
||||
|
||||
- s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
|
||||
for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
|
||||
|
||||
[1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
|
||||
property is specified, the 's5m8767,pmic-buck[2/3/4]-dvs-voltage'
|
||||
property should specify atleast one voltage level (which would be a
|
||||
safe operating voltage).
|
||||
|
||||
If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
|
||||
property is specified, then all the eight voltage values for the
|
||||
's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
|
||||
|
||||
Optional properties:
|
||||
- interrupt-parent: Specifies the phandle of the interrupt controller to which
|
||||
the interrupts from s5m8767 are delivered to.
|
||||
- interrupts: Interrupt specifiers for two interrupt sources.
|
||||
- First interrupt specifier is for 'irq1' interrupt.
|
||||
- Second interrupt specifier is for 'alert' interrupt.
|
||||
- s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
|
||||
- s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs.
|
||||
- s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs.
|
||||
|
||||
Additional properties required if either of the optional properties are used:
|
||||
|
||||
- s5m8767,pmic-buck234-default-dvs-idx: Default voltage setting selected from
|
||||
the possible 8 options selectable by the dvs gpios. The value of this
|
||||
property should be between 0 and 7. If not specified or if out of range, the
|
||||
default value of this property is set to 0.
|
||||
|
||||
- s5m8767,pmic-buck-dvs-gpios: GPIO specifiers for three host gpio's used
|
||||
for dvs. The format of the gpio specifier depends in the gpio controller.
|
||||
|
||||
Regulators: The regulators of s5m8767 that have to be instantiated should be
|
||||
included in a sub-node named 'regulators'. Regulator nodes included in this
|
||||
sub-node should be of the format as listed below.
|
||||
|
||||
regulator_name {
|
||||
ldo1_reg: LDO1 {
|
||||
regulator-name = "VDD_ALIVE_1.0V";
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
op_mode = <1>; /* Normal Mode */
|
||||
};
|
||||
};
|
||||
The above regulator entries are defined in regulator bindings documentation
|
||||
except op_mode description.
|
||||
- op_mode: describes the different operating modes of the LDO's with
|
||||
power mode change in SOC. The different possible values are,
|
||||
0 - always off mode
|
||||
1 - on in normal mode
|
||||
2 - low power mode
|
||||
3 - suspend mode
|
||||
|
||||
The following are the names of the regulators that the s5m8767 pmic block
|
||||
supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
|
||||
as per the datasheet of s5m8767.
|
||||
|
||||
- LDOn
|
||||
- valid values for n are 1 to 28
|
||||
- Example: LDO0, LD01, LDO28
|
||||
- BUCKn
|
||||
- valid values for n are 1 to 9.
|
||||
- Example: BUCK1, BUCK2, BUCK9
|
||||
|
||||
The bindings inside the regulator nodes use the standard regulator bindings
|
||||
which are documented elsewhere.
|
||||
|
||||
Example:
|
||||
|
||||
s5m8767_pmic@66 {
|
||||
compatible = "samsung,s5m8767-pmic";
|
||||
reg = <0x66>;
|
||||
|
||||
s5m8767,pmic-buck2-uses-gpio-dvs;
|
||||
s5m8767,pmic-buck3-uses-gpio-dvs;
|
||||
s5m8767,pmic-buck4-uses-gpio-dvs;
|
||||
|
||||
s5m8767,pmic-buck-default-dvs-idx = <0>;
|
||||
|
||||
s5m8767,pmic-buck-dvs-gpios = <&gpx0 0 1 0 0>, /* DVS1 */
|
||||
<&gpx0 1 1 0 0>, /* DVS2 */
|
||||
<&gpx0 2 1 0 0>; /* DVS3 */
|
||||
|
||||
s5m8767,pmic-buck-ds-gpios = <&gpx2 3 1 0 0>, /* SET1 */
|
||||
<&gpx2 4 1 0 0>, /* SET2 */
|
||||
<&gpx2 5 1 0 0>; /* SET3 */
|
||||
|
||||
s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
|
||||
<1250000>, <1200000>,
|
||||
<1150000>, <1100000>,
|
||||
<1000000>, <950000>;
|
||||
|
||||
s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
|
||||
<1100000>, <1100000>,
|
||||
<1000000>, <1000000>,
|
||||
<1000000>, <1000000>;
|
||||
|
||||
s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
|
||||
<1200000>, <1200000>,
|
||||
<1200000>, <1200000>,
|
||||
<1200000>, <1200000>;
|
||||
|
||||
regulators {
|
||||
ldo1_reg: LDO1 {
|
||||
regulator-name = "VDD_ABB_3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
op_mode = <1>; /* Normal Mode */
|
||||
};
|
||||
|
||||
ldo2_reg: LDO2 {
|
||||
regulator-name = "VDD_ALIVE_1.1V";
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
buck1_reg: BUCK1 {
|
||||
regulator-name = "VDD_MIF_1.2V";
|
||||
regulator-min-microvolt = <950000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -17,6 +17,7 @@
|
||||
#include <linux/err.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/of_irq.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/pm_runtime.h>
|
||||
#include <linux/mutex.h>
|
||||
@ -60,6 +61,15 @@ static struct mfd_cell s2mps11_devs[] = {
|
||||
},
|
||||
};
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
static struct of_device_id sec_dt_match[] = {
|
||||
{ .compatible = "samsung,s5m8767-pmic",
|
||||
.data = (void *)S5M8767X,
|
||||
},
|
||||
{},
|
||||
};
|
||||
#endif
|
||||
|
||||
int sec_reg_read(struct sec_pmic_dev *sec_pmic, u8 reg, void *dest)
|
||||
{
|
||||
return regmap_read(sec_pmic->regmap, reg, dest);
|
||||
@ -95,6 +105,57 @@ static struct regmap_config sec_regmap_config = {
|
||||
.val_bits = 8,
|
||||
};
|
||||
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
/*
|
||||
* Only the common platform data elements for s5m8767 are parsed here from the
|
||||
* device tree. Other sub-modules of s5m8767 such as pmic, rtc , charger and
|
||||
* others have to parse their own platform data elements from device tree.
|
||||
*
|
||||
* The s5m8767 platform data structure is instantiated here and the drivers for
|
||||
* the sub-modules need not instantiate another instance while parsing their
|
||||
* platform data.
|
||||
*/
|
||||
static struct sec_platform_data *sec_pmic_i2c_parse_dt_pdata(
|
||||
struct device *dev)
|
||||
{
|
||||
struct sec_platform_data *pd;
|
||||
|
||||
pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
|
||||
if (!pd) {
|
||||
dev_err(dev, "could not allocate memory for pdata\n");
|
||||
return ERR_PTR(-ENOMEM);
|
||||
}
|
||||
|
||||
/*
|
||||
* ToDo: the 'wakeup' member in the platform data is more of a linux
|
||||
* specfic information. Hence, there is no binding for that yet and
|
||||
* not parsed here.
|
||||
*/
|
||||
|
||||
return pd;
|
||||
}
|
||||
#else
|
||||
static struct sec_platform_data *sec_pmic_i2c_parse_dt_pdata(
|
||||
struct device *dev)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
static inline int sec_i2c_get_driver_data(struct i2c_client *i2c,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
#ifdef CONFIG_OF
|
||||
if (i2c->dev.of_node) {
|
||||
const struct of_device_id *match;
|
||||
match = of_match_node(sec_dt_match, i2c->dev.of_node);
|
||||
return (int)match->data;
|
||||
}
|
||||
#endif
|
||||
return (int)id->driver_data;
|
||||
}
|
||||
|
||||
static int sec_pmic_probe(struct i2c_client *i2c,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
@ -111,13 +172,22 @@ static int sec_pmic_probe(struct i2c_client *i2c,
|
||||
sec_pmic->dev = &i2c->dev;
|
||||
sec_pmic->i2c = i2c;
|
||||
sec_pmic->irq = i2c->irq;
|
||||
sec_pmic->type = id->driver_data;
|
||||
sec_pmic->type = sec_i2c_get_driver_data(i2c, id);
|
||||
|
||||
if (sec_pmic->dev->of_node) {
|
||||
pdata = sec_pmic_i2c_parse_dt_pdata(sec_pmic->dev);
|
||||
if (IS_ERR(pdata)) {
|
||||
ret = PTR_ERR(pdata);
|
||||
return ret;
|
||||
}
|
||||
pdata->device_type = sec_pmic->type;
|
||||
}
|
||||
if (pdata) {
|
||||
sec_pmic->device_type = pdata->device_type;
|
||||
sec_pmic->ono = pdata->ono;
|
||||
sec_pmic->irq_base = pdata->irq_base;
|
||||
sec_pmic->wakeup = pdata->wakeup;
|
||||
sec_pmic->pdata = pdata;
|
||||
}
|
||||
|
||||
sec_pmic->regmap = devm_regmap_init_i2c(i2c, &sec_regmap_config);
|
||||
@ -192,6 +262,7 @@ static struct i2c_driver sec_pmic_driver = {
|
||||
.driver = {
|
||||
.name = "sec_pmic",
|
||||
.owner = THIS_MODULE,
|
||||
.of_match_table = of_match_ptr(sec_dt_match),
|
||||
},
|
||||
.probe = sec_pmic_probe,
|
||||
.remove = sec_pmic_remove,
|
||||
|
||||
@ -14,6 +14,7 @@
|
||||
#include <linux/bug.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/of_gpio.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
@ -21,6 +22,9 @@
|
||||
#include <linux/regulator/machine.h>
|
||||
#include <linux/mfd/samsung/core.h>
|
||||
#include <linux/mfd/samsung/s5m8767.h>
|
||||
#include <linux/regulator/of_regulator.h>
|
||||
|
||||
#define S5M8767_OPMODE_NORMAL_MODE 0x1
|
||||
|
||||
struct s5m8767_info {
|
||||
struct device *dev;
|
||||
@ -255,10 +259,8 @@ static int s5m8767_reg_disable(struct regulator_dev *rdev)
|
||||
return sec_reg_update(s5m8767->iodev, reg, ~mask, mask);
|
||||
}
|
||||
|
||||
static int s5m8767_get_voltage_register(struct regulator_dev *rdev, int *_reg)
|
||||
static int s5m8767_get_vsel_reg(int reg_id, struct s5m8767_info *s5m8767)
|
||||
{
|
||||
struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
|
||||
int reg_id = rdev_get_id(rdev);
|
||||
int reg;
|
||||
|
||||
switch (reg_id) {
|
||||
@ -296,43 +298,18 @@ static int s5m8767_get_voltage_register(struct regulator_dev *rdev, int *_reg)
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
*_reg = reg;
|
||||
|
||||
return 0;
|
||||
return reg;
|
||||
}
|
||||
|
||||
static int s5m8767_get_voltage_sel(struct regulator_dev *rdev)
|
||||
{
|
||||
struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
|
||||
int reg, mask, ret;
|
||||
int reg_id = rdev_get_id(rdev);
|
||||
unsigned int val;
|
||||
|
||||
ret = s5m8767_get_voltage_register(rdev, ®);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
mask = (reg_id < S5M8767_BUCK1) ? 0x3f : 0xff;
|
||||
|
||||
ret = sec_reg_read(s5m8767->iodev, reg, &val);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
val &= mask;
|
||||
|
||||
return val;
|
||||
}
|
||||
|
||||
static int s5m8767_convert_voltage_to_sel(
|
||||
const struct sec_voltage_desc *desc,
|
||||
int min_vol, int max_vol)
|
||||
static int s5m8767_convert_voltage_to_sel(const struct sec_voltage_desc *desc,
|
||||
int min_vol)
|
||||
{
|
||||
int selector = 0;
|
||||
|
||||
if (desc == NULL)
|
||||
return -EINVAL;
|
||||
|
||||
if (max_vol < desc->min || min_vol > desc->max)
|
||||
if (min_vol > desc->max)
|
||||
return -EINVAL;
|
||||
|
||||
if (min_vol < desc->min)
|
||||
@ -340,7 +317,7 @@ static int s5m8767_convert_voltage_to_sel(
|
||||
|
||||
selector = DIV_ROUND_UP(min_vol - desc->min, desc->step);
|
||||
|
||||
if (desc->min + desc->step * selector > max_vol)
|
||||
if (desc->min + desc->step * selector > desc->max)
|
||||
return -EINVAL;
|
||||
|
||||
return selector;
|
||||
@ -373,15 +350,13 @@ static int s5m8767_set_voltage_sel(struct regulator_dev *rdev,
|
||||
{
|
||||
struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
|
||||
int reg_id = rdev_get_id(rdev);
|
||||
int reg, mask, ret = 0, old_index, index = 0;
|
||||
int old_index, index = 0;
|
||||
u8 *buck234_vol = NULL;
|
||||
|
||||
switch (reg_id) {
|
||||
case S5M8767_LDO1 ... S5M8767_LDO28:
|
||||
mask = 0x3f;
|
||||
break;
|
||||
case S5M8767_BUCK1 ... S5M8767_BUCK6:
|
||||
mask = 0xff;
|
||||
if (reg_id == S5M8767_BUCK2 && s5m8767->buck2_gpiodvs)
|
||||
buck234_vol = &s5m8767->buck2_vol[0];
|
||||
else if (reg_id == S5M8767_BUCK3 && s5m8767->buck3_gpiodvs)
|
||||
@ -392,7 +367,6 @@ static int s5m8767_set_voltage_sel(struct regulator_dev *rdev,
|
||||
case S5M8767_BUCK7 ... S5M8767_BUCK8:
|
||||
return -EINVAL;
|
||||
case S5M8767_BUCK9:
|
||||
mask = 0xff;
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
@ -412,11 +386,7 @@ static int s5m8767_set_voltage_sel(struct regulator_dev *rdev,
|
||||
else
|
||||
return s5m8767_set_low(s5m8767);
|
||||
} else {
|
||||
ret = s5m8767_get_voltage_register(rdev, ®);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
return sec_reg_update(s5m8767->iodev, reg, selector, mask);
|
||||
return regulator_set_voltage_sel_regmap(rdev, selector);
|
||||
}
|
||||
}
|
||||
|
||||
@ -441,7 +411,7 @@ static struct regulator_ops s5m8767_ops = {
|
||||
.is_enabled = s5m8767_reg_is_enabled,
|
||||
.enable = s5m8767_reg_enable,
|
||||
.disable = s5m8767_reg_disable,
|
||||
.get_voltage_sel = s5m8767_get_voltage_sel,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.set_voltage_sel = s5m8767_set_voltage_sel,
|
||||
.set_voltage_time_sel = s5m8767_set_voltage_time_sel,
|
||||
};
|
||||
@ -508,10 +478,182 @@ static struct regulator_desc regulators[] = {
|
||||
s5m8767_regulator_desc(BUCK9),
|
||||
};
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
static int s5m8767_pmic_dt_parse_dvs_gpio(struct sec_pmic_dev *iodev,
|
||||
struct sec_platform_data *pdata,
|
||||
struct device_node *pmic_np)
|
||||
{
|
||||
int i, gpio;
|
||||
|
||||
for (i = 0; i < 3; i++) {
|
||||
gpio = of_get_named_gpio(pmic_np,
|
||||
"s5m8767,pmic-buck-dvs-gpios", i);
|
||||
if (!gpio_is_valid(gpio)) {
|
||||
dev_err(iodev->dev, "invalid gpio[%d]: %d\n", i, gpio);
|
||||
return -EINVAL;
|
||||
}
|
||||
pdata->buck_gpios[i] = gpio;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int s5m8767_pmic_dt_parse_ds_gpio(struct sec_pmic_dev *iodev,
|
||||
struct sec_platform_data *pdata,
|
||||
struct device_node *pmic_np)
|
||||
{
|
||||
int i, gpio;
|
||||
|
||||
for (i = 0; i < 3; i++) {
|
||||
gpio = of_get_named_gpio(pmic_np,
|
||||
"s5m8767,pmic-buck-ds-gpios", i);
|
||||
if (!gpio_is_valid(gpio)) {
|
||||
dev_err(iodev->dev, "invalid gpio[%d]: %d\n", i, gpio);
|
||||
return -EINVAL;
|
||||
}
|
||||
pdata->buck_ds[i] = gpio;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev,
|
||||
struct sec_platform_data *pdata)
|
||||
{
|
||||
struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
|
||||
struct device_node *pmic_np, *regulators_np, *reg_np;
|
||||
struct sec_regulator_data *rdata;
|
||||
struct sec_opmode_data *rmode;
|
||||
unsigned int i, dvs_voltage_nr = 1, ret;
|
||||
|
||||
pmic_np = iodev->dev->of_node;
|
||||
if (!pmic_np) {
|
||||
dev_err(iodev->dev, "could not find pmic sub-node\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
regulators_np = of_find_node_by_name(pmic_np, "regulators");
|
||||
if (!regulators_np) {
|
||||
dev_err(iodev->dev, "could not find regulators sub-node\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/* count the number of regulators to be supported in pmic */
|
||||
pdata->num_regulators = of_get_child_count(regulators_np);
|
||||
|
||||
rdata = devm_kzalloc(&pdev->dev, sizeof(*rdata) *
|
||||
pdata->num_regulators, GFP_KERNEL);
|
||||
if (!rdata) {
|
||||
dev_err(iodev->dev,
|
||||
"could not allocate memory for regulator data\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
rmode = devm_kzalloc(&pdev->dev, sizeof(*rmode) *
|
||||
pdata->num_regulators, GFP_KERNEL);
|
||||
if (!rdata) {
|
||||
dev_err(iodev->dev,
|
||||
"could not allocate memory for regulator mode\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
pdata->regulators = rdata;
|
||||
pdata->opmode = rmode;
|
||||
for_each_child_of_node(regulators_np, reg_np) {
|
||||
for (i = 0; i < ARRAY_SIZE(regulators); i++)
|
||||
if (!of_node_cmp(reg_np->name, regulators[i].name))
|
||||
break;
|
||||
|
||||
if (i == ARRAY_SIZE(regulators)) {
|
||||
dev_warn(iodev->dev,
|
||||
"don't know how to configure regulator %s\n",
|
||||
reg_np->name);
|
||||
continue;
|
||||
}
|
||||
|
||||
rdata->id = i;
|
||||
rdata->initdata = of_get_regulator_init_data(
|
||||
&pdev->dev, reg_np);
|
||||
rdata->reg_node = reg_np;
|
||||
rdata++;
|
||||
rmode->id = i;
|
||||
if (of_property_read_u32(reg_np, "op_mode",
|
||||
&rmode->mode)) {
|
||||
dev_warn(iodev->dev,
|
||||
"no op_mode property property at %s\n",
|
||||
reg_np->full_name);
|
||||
|
||||
rmode->mode = S5M8767_OPMODE_NORMAL_MODE;
|
||||
}
|
||||
rmode++;
|
||||
}
|
||||
|
||||
if (of_get_property(pmic_np, "s5m8767,pmic-buck2-uses-gpio-dvs", NULL))
|
||||
pdata->buck2_gpiodvs = true;
|
||||
|
||||
if (of_get_property(pmic_np, "s5m8767,pmic-buck3-uses-gpio-dvs", NULL))
|
||||
pdata->buck3_gpiodvs = true;
|
||||
|
||||
if (of_get_property(pmic_np, "s5m8767,pmic-buck4-uses-gpio-dvs", NULL))
|
||||
pdata->buck4_gpiodvs = true;
|
||||
|
||||
if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs ||
|
||||
pdata->buck4_gpiodvs) {
|
||||
ret = s5m8767_pmic_dt_parse_dvs_gpio(iodev, pdata, pmic_np);
|
||||
if (ret)
|
||||
return -EINVAL;
|
||||
|
||||
if (of_property_read_u32(pmic_np,
|
||||
"s5m8767,pmic-buck-default-dvs-idx",
|
||||
&pdata->buck_default_idx)) {
|
||||
pdata->buck_default_idx = 0;
|
||||
} else {
|
||||
if (pdata->buck_default_idx >= 8) {
|
||||
pdata->buck_default_idx = 0;
|
||||
dev_info(iodev->dev,
|
||||
"invalid value for default dvs index, use 0\n");
|
||||
}
|
||||
}
|
||||
dvs_voltage_nr = 8;
|
||||
}
|
||||
|
||||
ret = s5m8767_pmic_dt_parse_ds_gpio(iodev, pdata, pmic_np);
|
||||
if (ret)
|
||||
return -EINVAL;
|
||||
|
||||
if (of_property_read_u32_array(pmic_np,
|
||||
"s5m8767,pmic-buck2-dvs-voltage",
|
||||
pdata->buck2_voltage, dvs_voltage_nr)) {
|
||||
dev_err(iodev->dev, "buck2 voltages not specified\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (of_property_read_u32_array(pmic_np,
|
||||
"s5m8767,pmic-buck3-dvs-voltage",
|
||||
pdata->buck3_voltage, dvs_voltage_nr)) {
|
||||
dev_err(iodev->dev, "buck3 voltages not specified\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (of_property_read_u32_array(pmic_np,
|
||||
"s5m8767,pmic-buck4-dvs-voltage",
|
||||
pdata->buck4_voltage, dvs_voltage_nr)) {
|
||||
dev_err(iodev->dev, "buck4 voltages not specified\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
#else
|
||||
static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev,
|
||||
struct sec_platform_data *pdata)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
#endif /* CONFIG_OF */
|
||||
|
||||
static int s5m8767_pmic_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
|
||||
struct sec_platform_data *pdata = dev_get_platdata(iodev->dev);
|
||||
struct sec_platform_data *pdata = iodev->pdata;
|
||||
struct regulator_config config = { };
|
||||
struct regulator_dev **rdev;
|
||||
struct s5m8767_info *s5m8767;
|
||||
@ -522,6 +664,12 @@ static int s5m8767_pmic_probe(struct platform_device *pdev)
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
if (iodev->dev->of_node) {
|
||||
ret = s5m8767_pmic_dt_parse_pdata(pdev, pdata);
|
||||
if (ret)
|
||||
return ret;
|
||||
}
|
||||
|
||||
if (pdata->buck2_gpiodvs) {
|
||||
if (pdata->buck3_gpiodvs || pdata->buck4_gpiodvs) {
|
||||
dev_err(&pdev->dev, "S5M8767 GPIO DVS NOT VALID\n");
|
||||
@ -577,23 +725,17 @@ static int s5m8767_pmic_probe(struct platform_device *pdev)
|
||||
s5m8767->opmode = pdata->opmode;
|
||||
|
||||
buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2,
|
||||
pdata->buck2_init,
|
||||
pdata->buck2_init +
|
||||
buck_voltage_val2.step);
|
||||
pdata->buck2_init);
|
||||
|
||||
sec_reg_write(s5m8767->iodev, S5M8767_REG_BUCK2DVS2, buck_init);
|
||||
|
||||
buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2,
|
||||
pdata->buck3_init,
|
||||
pdata->buck3_init +
|
||||
buck_voltage_val2.step);
|
||||
pdata->buck3_init);
|
||||
|
||||
sec_reg_write(s5m8767->iodev, S5M8767_REG_BUCK3DVS2, buck_init);
|
||||
|
||||
buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2,
|
||||
pdata->buck4_init,
|
||||
pdata->buck4_init +
|
||||
buck_voltage_val2.step);
|
||||
pdata->buck4_init);
|
||||
|
||||
sec_reg_write(s5m8767->iodev, S5M8767_REG_BUCK4DVS2, buck_init);
|
||||
|
||||
@ -602,27 +744,21 @@ static int s5m8767_pmic_probe(struct platform_device *pdev)
|
||||
s5m8767->buck2_vol[i] =
|
||||
s5m8767_convert_voltage_to_sel(
|
||||
&buck_voltage_val2,
|
||||
pdata->buck2_voltage[i],
|
||||
pdata->buck2_voltage[i] +
|
||||
buck_voltage_val2.step);
|
||||
pdata->buck2_voltage[i]);
|
||||
}
|
||||
|
||||
if (s5m8767->buck3_gpiodvs) {
|
||||
s5m8767->buck3_vol[i] =
|
||||
s5m8767_convert_voltage_to_sel(
|
||||
&buck_voltage_val2,
|
||||
pdata->buck3_voltage[i],
|
||||
pdata->buck3_voltage[i] +
|
||||
buck_voltage_val2.step);
|
||||
pdata->buck3_voltage[i]);
|
||||
}
|
||||
|
||||
if (s5m8767->buck4_gpiodvs) {
|
||||
s5m8767->buck4_vol[i] =
|
||||
s5m8767_convert_voltage_to_sel(
|
||||
&buck_voltage_val2,
|
||||
pdata->buck4_voltage[i],
|
||||
pdata->buck4_voltage[i] +
|
||||
buck_voltage_val2.step);
|
||||
pdata->buck4_voltage[i]);
|
||||
}
|
||||
}
|
||||
|
||||
@ -760,11 +896,19 @@ static int s5m8767_pmic_probe(struct platform_device *pdev)
|
||||
(desc->max - desc->min) / desc->step + 1;
|
||||
regulators[id].min_uV = desc->min;
|
||||
regulators[id].uV_step = desc->step;
|
||||
regulators[id].vsel_reg =
|
||||
s5m8767_get_vsel_reg(id, s5m8767);
|
||||
if (id < S5M8767_BUCK1)
|
||||
regulators[id].vsel_mask = 0x3f;
|
||||
else
|
||||
regulators[id].vsel_mask = 0xff;
|
||||
}
|
||||
|
||||
config.dev = s5m8767->dev;
|
||||
config.init_data = pdata->regulators[i].initdata;
|
||||
config.driver_data = s5m8767;
|
||||
config.regmap = iodev->regmap;
|
||||
config.of_node = pdata->regulators[i].reg_node;
|
||||
|
||||
rdev[i] = regulator_register(®ulators[id], &config);
|
||||
if (IS_ERR(rdev[i])) {
|
||||
|
||||
@ -26,6 +26,7 @@ enum sec_device_type {
|
||||
/**
|
||||
* struct sec_pmic_dev - s5m87xx master device for sub-drivers
|
||||
* @dev: master device of the chip (can be used to access platform data)
|
||||
* @pdata: pointer to private data used to pass platform data to child
|
||||
* @i2c: i2c client private data for regulator
|
||||
* @rtc: i2c client private data for rtc
|
||||
* @iolock: mutex for serializing io access
|
||||
@ -39,6 +40,7 @@ enum sec_device_type {
|
||||
*/
|
||||
struct sec_pmic_dev {
|
||||
struct device *dev;
|
||||
struct sec_platform_data *pdata;
|
||||
struct regmap *regmap;
|
||||
struct i2c_client *i2c;
|
||||
struct i2c_client *rtc;
|
||||
@ -82,11 +84,11 @@ struct sec_platform_data {
|
||||
|
||||
int buck_gpios[3];
|
||||
int buck_ds[3];
|
||||
int buck2_voltage[8];
|
||||
unsigned int buck2_voltage[8];
|
||||
bool buck2_gpiodvs;
|
||||
int buck3_voltage[8];
|
||||
unsigned int buck3_voltage[8];
|
||||
bool buck3_gpiodvs;
|
||||
int buck4_voltage[8];
|
||||
unsigned int buck4_voltage[8];
|
||||
bool buck4_gpiodvs;
|
||||
|
||||
int buck_set1;
|
||||
@ -127,6 +129,7 @@ struct sec_platform_data {
|
||||
struct sec_regulator_data {
|
||||
int id;
|
||||
struct regulator_init_data *initdata;
|
||||
struct device_node *reg_node;
|
||||
};
|
||||
|
||||
/*
|
||||
@ -136,7 +139,7 @@ struct sec_regulator_data {
|
||||
*/
|
||||
struct sec_opmode_data {
|
||||
int id;
|
||||
int mode;
|
||||
unsigned int mode;
|
||||
};
|
||||
|
||||
/*
|
||||
|
||||
Loading…
Reference in New Issue
Block a user