hpt366: add hpt3xx_disable_fast_irq() helper
* Factor out disabling of "fast interrupt" prediction from init_hwif_hpt366() to hpt3xx_disable_fast_irq() helper. * Use hpt3xx_disable_fast_irq() in ->init_chipset instead of ->init_hwif method. This is a preparation for adding proper PCI PM support. While at it: * Cache chip type in chip_type variable in hpt3xx_disable_fast_irq(). There should be no functional changes caused by this patch. Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
This commit is contained in:
parent
a02227c977
commit
1785192b53
@ -971,6 +971,36 @@ static int __devinit hpt37x_calibrate_dpll(struct pci_dev *dev, u16 f_low, u16 f
|
|||||||
return 1;
|
return 1;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
static void __devinit hpt3xx_disable_fast_irq(struct pci_dev *dev, u8 mcr_addr)
|
||||||
|
{
|
||||||
|
struct ide_host *host = pci_get_drvdata(dev);
|
||||||
|
struct hpt_info *info = host->host_priv + (&dev->dev == host->dev[1]);
|
||||||
|
u8 chip_type = info->chip_type;
|
||||||
|
u8 new_mcr, old_mcr = 0;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Disable the "fast interrupt" prediction. Don't hold off
|
||||||
|
* on interrupts. (== 0x01 despite what the docs say)
|
||||||
|
*/
|
||||||
|
pci_read_config_byte(dev, mcr_addr + 1, &old_mcr);
|
||||||
|
|
||||||
|
if (chip_type >= HPT374)
|
||||||
|
new_mcr = old_mcr & ~0x07;
|
||||||
|
else if (chip_type >= HPT370) {
|
||||||
|
new_mcr = old_mcr;
|
||||||
|
new_mcr &= ~0x02;
|
||||||
|
#ifdef HPT_DELAY_INTERRUPT
|
||||||
|
new_mcr &= ~0x01;
|
||||||
|
#else
|
||||||
|
new_mcr |= 0x01;
|
||||||
|
#endif
|
||||||
|
} else /* HPT366 and HPT368 */
|
||||||
|
new_mcr = old_mcr & ~0x80;
|
||||||
|
|
||||||
|
if (new_mcr != old_mcr)
|
||||||
|
pci_write_config_byte(dev, mcr_addr + 1, new_mcr);
|
||||||
|
}
|
||||||
|
|
||||||
static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev)
|
static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev)
|
||||||
{
|
{
|
||||||
unsigned long io_base = pci_resource_start(dev, 4);
|
unsigned long io_base = pci_resource_start(dev, 4);
|
||||||
@ -1208,9 +1238,11 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev)
|
|||||||
* NOTE: This register is only writeable via I/O space.
|
* NOTE: This register is only writeable via I/O space.
|
||||||
*/
|
*/
|
||||||
if (chip_type == HPT371N && clock == ATA_CLOCK_66MHZ)
|
if (chip_type == HPT371N && clock == ATA_CLOCK_66MHZ)
|
||||||
|
|
||||||
outb(inb(io_base + 0x9c) | 0x04, io_base + 0x9c);
|
outb(inb(io_base + 0x9c) | 0x04, io_base + 0x9c);
|
||||||
|
|
||||||
|
hpt3xx_disable_fast_irq(dev, 0x50);
|
||||||
|
hpt3xx_disable_fast_irq(dev, 0x54);
|
||||||
|
|
||||||
return dev->irq;
|
return dev->irq;
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -1264,7 +1296,6 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
|
|||||||
struct hpt_info *info = hpt3xx_get_info(hwif->dev);
|
struct hpt_info *info = hpt3xx_get_info(hwif->dev);
|
||||||
int serialize = HPT_SERIALIZE_IO;
|
int serialize = HPT_SERIALIZE_IO;
|
||||||
u8 chip_type = info->chip_type;
|
u8 chip_type = info->chip_type;
|
||||||
u8 new_mcr, old_mcr = 0;
|
|
||||||
|
|
||||||
/* Cache the channel's MISC. control registers' offset */
|
/* Cache the channel's MISC. control registers' offset */
|
||||||
hwif->select_data = hwif->channel ? 0x54 : 0x50;
|
hwif->select_data = hwif->channel ? 0x54 : 0x50;
|
||||||
@ -1287,29 +1318,6 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
|
|||||||
/* Serialize access to this device if needed */
|
/* Serialize access to this device if needed */
|
||||||
if (serialize && hwif->mate)
|
if (serialize && hwif->mate)
|
||||||
hwif->serialized = hwif->mate->serialized = 1;
|
hwif->serialized = hwif->mate->serialized = 1;
|
||||||
|
|
||||||
/*
|
|
||||||
* Disable the "fast interrupt" prediction. Don't hold off
|
|
||||||
* on interrupts. (== 0x01 despite what the docs say)
|
|
||||||
*/
|
|
||||||
pci_read_config_byte(dev, hwif->select_data + 1, &old_mcr);
|
|
||||||
|
|
||||||
if (info->chip_type >= HPT374)
|
|
||||||
new_mcr = old_mcr & ~0x07;
|
|
||||||
else if (info->chip_type >= HPT370) {
|
|
||||||
new_mcr = old_mcr;
|
|
||||||
new_mcr &= ~0x02;
|
|
||||||
|
|
||||||
#ifdef HPT_DELAY_INTERRUPT
|
|
||||||
new_mcr &= ~0x01;
|
|
||||||
#else
|
|
||||||
new_mcr |= 0x01;
|
|
||||||
#endif
|
|
||||||
} else /* HPT366 and HPT368 */
|
|
||||||
new_mcr = old_mcr & ~0x80;
|
|
||||||
|
|
||||||
if (new_mcr != old_mcr)
|
|
||||||
pci_write_config_byte(dev, hwif->select_data + 1, new_mcr);
|
|
||||||
}
|
}
|
||||||
|
|
||||||
static int __devinit init_dma_hpt366(ide_hwif_t *hwif,
|
static int __devinit init_dma_hpt366(ide_hwif_t *hwif,
|
||||||
|
Loading…
Reference in New Issue
Block a user