leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

Browse Source 
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (50 commits)
  x86, mm: Allow ZONE_DMA to be configurable
  x86, NUMA: Trim numa meminfo with max_pfn in a separate loop
  x86, NUMA: Rename setup_node_bootmem() to setup_node_data()
  x86, NUMA: Enable emulation on 32bit too
  x86, NUMA: Enable CONFIG_AMD_NUMA on 32bit too
  x86, NUMA: Rename amdtopology_64.c to amdtopology.c
  x86, NUMA: Make numa_init_array() static
  x86, NUMA: Make 32bit use common NUMA init path
  x86, NUMA: Initialize and use remap allocator from setup_node_bootmem()
  x86-32, NUMA: Add @start and @end to init_alloc_remap()
  x86, NUMA: Remove long 64bit assumption from numa.c
  x86, NUMA: Enable build of generic NUMA init code on 32bit
  x86, NUMA: Move NUMA init logic from numa_64.c to numa.c
  x86-32, NUMA: Update numaq to use new NUMA init protocol
  x86-32, NUMA: Replace srat_32.c with srat.c
  x86-32, NUMA: implement temporary NUMA init shims
  x86, NUMA: Move numa_nodes_parsed to numa.[hc]
  x86-32, NUMA: Move get_memcfg_numa() into numa_32.c
  x86, NUMA: make srat.c 32bit safe
  x86, NUMA: rename srat_64.c to srat.c
  ...
This commit is contained in:
Linus Torvalds 2011-05-19 18:07:31 -07:00
commit 13588209aa
39 changed files with 831 additions and 1609 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

43
arch/x86/Kconfig
View File

@ -112,7 +112,14 @@ config MMU
def_bool y
config ZONE_DMA
def_bool y
bool "DMA memory allocation support" if EXPERT
default y
help
DMA memory allocation support allows devices with less than 32-bit
addressing to allocate within the first 16MB of address space.
Disable if no such devices will be used.
If unsure, say Y.
config SBUS
bool
@ -1164,7 +1171,7 @@ comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI"
config AMD_NUMA
def_bool y
prompt "Old style AMD Opteron NUMA detection"
depends on X86_64 && NUMA && PCI
depends on NUMA && PCI
---help---
Enable AMD NUMA node topology detection. You should say Y here if
you have a multi processor AMD system. This uses an old method to
@ -1191,7 +1198,7 @@ config NODES_SPAN_OTHER_NODES
config NUMA_EMU
bool "NUMA emulation"
depends on X86_64 && NUMA
depends on NUMA
---help---
Enable NUMA emulation. A flat machine will be split
into virtual nodes when booted with "numa=fake=N", where N is the
@ -1213,6 +1220,10 @@ config HAVE_ARCH_BOOTMEM
def_bool y
depends on X86_32 && NUMA
config HAVE_ARCH_ALLOC_REMAP
def_bool y
depends on X86_32 && NUMA
config ARCH_HAVE_MEMORY_PRESENT
def_bool y
depends on X86_32 && DISCONTIGMEM
@ -1221,13 +1232,9 @@ config NEED_NODE_MEMMAP_SIZE
def_bool y
depends on X86_32 && (DISCONTIGMEM || SPARSEMEM)
config HAVE_ARCH_ALLOC_REMAP
def_bool y
depends on X86_32 && NUMA
config ARCH_FLATMEM_ENABLE
def_bool y
depends on X86_32 && ARCH_SELECT_MEMORY_MODEL && !NUMA
depends on X86_32 && !NUMA
config ARCH_DISCONTIGMEM_ENABLE
def_bool y
@ -1237,20 +1244,16 @@ config ARCH_DISCONTIGMEM_DEFAULT
def_bool y
depends on NUMA && X86_32
config ARCH_PROC_KCORE_TEXT
def_bool y
depends on X86_64 && PROC_KCORE
config ARCH_SPARSEMEM_DEFAULT
def_bool y
depends on X86_64
config ARCH_SPARSEMEM_ENABLE
def_bool y
depends on X86_64 || NUMA || (EXPERIMENTAL && X86_32) || X86_32_NON_STANDARD
select SPARSEMEM_STATIC if X86_32
select SPARSEMEM_VMEMMAP_ENABLE if X86_64
config ARCH_SPARSEMEM_DEFAULT
def_bool y
depends on X86_64
config ARCH_SELECT_MEMORY_MODEL
def_bool y
depends on ARCH_SPARSEMEM_ENABLE
@ -1259,6 +1262,10 @@ config ARCH_MEMORY_PROBE
def_bool X86_64
depends on MEMORY_HOTPLUG
config ARCH_PROC_KCORE_TEXT
def_bool y
depends on X86_64 && PROC_KCORE
config ILLEGAL_POINTER_VALUE
hex
default 0 if X86_32
@ -1693,10 +1700,6 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE
def_bool y
depends on MEMORY_HOTPLUG
config HAVE_ARCH_EARLY_PFN_TO_NID
def_bool X86_64
depends on NUMA
config USE_PERCPU_NUMA_NODE_ID
def_bool y
depends on NUMA

2
arch/x86/include/asm/acpi.h
View File

@ -183,8 +183,6 @@ static inline void disable_acpi(void) { }
#define ARCH_HAS_POWER_INIT 1
struct bootnode;
#ifdef CONFIG_ACPI_NUMA
extern int acpi_numa;
extern int x86_acpi_numa_init(void);

1
arch/x86/include/asm/amd_nb.h
View File

@ -11,7 +11,6 @@ struct amd_nb_bus_dev_range {
extern const struct pci_device_id amd_nb_misc_ids[];
extern const struct amd_nb_bus_dev_range amd_nb_bus_dev_ranges[];
struct bootnode;
extern bool early_is_amd_nb(u32 value);
extern int amd_cache_northbridges(void);

9
arch/x86/include/asm/apic.h
View File

@ -363,7 +363,12 @@ struct apic {
*/
int (*x86_32_early_logical_apicid)(int cpu);
/* determine CPU -> NUMA node mapping */
/*
* Optional method called from setup_local_APIC() after logical
* apicid is guaranteed to be known to initialize apicid -> node
* mapping if NUMA initialization hasn't done so already. Don't
* add new users.
*/
int (*x86_32_numa_cpu_node)(int cpu);
#endif
};
@ -537,8 +542,6 @@ static inline int default_phys_pkg_id(int cpuid_apic, int index_msb)
return cpuid_apic >> index_msb;
}
extern int default_x86_32_numa_cpu_node(int cpu);
#endif
static inline unsigned int

13
arch/x86/include/asm/cpufeature.h
View File

@ -208,8 +208,7 @@ extern const char * const x86_power_flags[32];
#define test_cpu_cap(c, bit) \
test_bit(bit, (unsigned long *)((c)->x86_capability))
#define cpu_has(c, bit) \
(__builtin_constant_p(bit) && \
#define REQUIRED_MASK_BIT_SET(bit) \
( (((bit)>>5)==0 && (1UL<<((bit)&31) & REQUIRED_MASK0)) || \
(((bit)>>5)==1 && (1UL<<((bit)&31) & REQUIRED_MASK1)) || \
(((bit)>>5)==2 && (1UL<<((bit)&31) & REQUIRED_MASK2)) || \
@ -219,10 +218,16 @@ extern const char * const x86_power_flags[32];
(((bit)>>5)==6 && (1UL<<((bit)&31) & REQUIRED_MASK6)) || \
(((bit)>>5)==7 && (1UL<<((bit)&31) & REQUIRED_MASK7)) || \
(((bit)>>5)==8 && (1UL<<((bit)&31) & REQUIRED_MASK8)) || \
(((bit)>>5)==9 && (1UL<<((bit)&31) & REQUIRED_MASK9)) ) \
? 1 : \
(((bit)>>5)==9 && (1UL<<((bit)&31) & REQUIRED_MASK9)) )
#define cpu_has(c, bit) \
(__builtin_constant_p(bit) && REQUIRED_MASK_BIT_SET(bit) ? 1 : \
test_cpu_cap(c, bit))
#define this_cpu_has(bit) \
(__builtin_constant_p(bit) && REQUIRED_MASK_BIT_SET(bit) ? 1 : \
x86_this_cpu_test_bit(bit, (unsigned long *)&cpu_info.x86_capability))
#define boot_cpu_has(bit) cpu_has(&boot_cpu_data, bit)
#define set_cpu_cap(c, bit) set_bit(bit, (unsigned long *)((c)->x86_capability))

12
arch/x86/include/asm/dma.h
View File

@ -69,22 +69,18 @@
#define MAX_DMA_CHANNELS 8
#ifdef CONFIG_X86_32
/* The maximum address that we can perform a DMA transfer to on this platform */
#define MAX_DMA_ADDRESS (PAGE_OFFSET + 0x1000000)
#else
/* 16MB ISA DMA zone */
#define MAX_DMA_PFN ((16 * 1024 * 1024) >> PAGE_SHIFT)
/* 4GB broken PCI/AGP hardware bus master zone */
#define MAX_DMA32_PFN ((4UL * 1024 * 1024 * 1024) >> PAGE_SHIFT)
#ifdef CONFIG_X86_32
/* The maximum address that we can perform a DMA transfer to on this platform */
#define MAX_DMA_ADDRESS (PAGE_OFFSET + 0x1000000)
#else
/* Compat define for old dma zone */
#define MAX_DMA_ADDRESS ((unsigned long)__va(MAX_DMA_PFN << PAGE_SHIFT))
#endif
/* 8237 DMA controllers */

20
arch/x86/include/asm/mmzone_32.h
View File

@ -13,31 +13,11 @@ extern struct pglist_data *node_data[];
#define NODE_DATA(nid) (node_data[nid])
#include <asm/numaq.h>
/* summit or generic arch */
#include <asm/srat.h>
extern int get_memcfg_numa_flat(void);
/*
* This allows any one NUMA architecture to be compiled
* for, and still fall back to the flat function if it
* fails.
*/
static inline void get_memcfg_numa(void)
{
if (get_memcfg_numaq())
return;
if (get_memcfg_from_srat())
return;
get_memcfg_numa_flat();
}
extern void resume_map_numa_kva(pgd_t *pgd);
#else /* !CONFIG_NUMA */
#define get_memcfg_numa get_memcfg_numa_flat
static inline void resume_map_numa_kva(pgd_t *pgd) {}
#endif /* CONFIG_NUMA */

23
arch/x86/include/asm/mmzone_64.h
View File

@ -4,36 +4,13 @@
#ifndef _ASM_X86_MMZONE_64_H
#define _ASM_X86_MMZONE_64_H
#ifdef CONFIG_NUMA
#include <linux/mmdebug.h>
#include <asm/smp.h>
/* Simple perfect hash to map physical addresses to node numbers */
struct memnode {
int shift;
unsigned int mapsize;
s16 *map;
s16 embedded_map[64 - 8];
} ____cacheline_aligned; /* total size = 128 bytes */
extern struct memnode memnode;
#define memnode_shift memnode.shift
#define memnodemap memnode.map
#define memnodemapsize memnode.mapsize
extern struct pglist_data *node_data[];
static inline __attribute__((pure)) int phys_to_nid(unsigned long addr)
{
unsigned nid;
VIRTUAL_BUG_ON(!memnodemap);
nid = memnodemap[addr >> memnode_shift];
VIRTUAL_BUG_ON(nid >= MAX_NUMNODES || !node_data[nid]);
return nid;
}
#define NODE_DATA(nid) (node_data[nid])
#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn)

32
arch/x86/include/asm/numa.h
View File

@ -1,12 +1,24 @@
#ifndef _ASM_X86_NUMA_H
#define _ASM_X86_NUMA_H
#include <linux/nodemask.h>
#include <asm/topology.h>
#include <asm/apicdef.h>
#ifdef CONFIG_NUMA
#define NR_NODE_MEMBLKS (MAX_NUMNODES*2)
#define ZONE_ALIGN (1UL << (MAX_ORDER+PAGE_SHIFT))
/*
* Too small node sizes may confuse the VM badly. Usually they
* result from BIOS bugs. So dont recognize nodes as standalone
* NUMA entities that have less than this amount of RAM listed:
*/
#define NODE_MIN_SIZE (4*1024*1024)
extern int numa_off;
/*
* __apicid_to_node[] stores the raw mapping between physical apicid and
@ -17,15 +29,27 @@
* numa_cpu_node().
*/
extern s16 __apicid_to_node[MAX_LOCAL_APIC];
extern nodemask_t numa_nodes_parsed __initdata;
extern int __init numa_add_memblk(int nodeid, u64 start, u64 end);
extern void __init numa_set_distance(int from, int to, int distance);
static inline void set_apicid_to_node(int apicid, s16 node)
{
__apicid_to_node[apicid] = node;
}
extern int __cpuinit numa_cpu_node(int cpu);
#else /* CONFIG_NUMA */
static inline void set_apicid_to_node(int apicid, s16 node)
{
}
static inline int numa_cpu_node(int cpu)
{
return NUMA_NO_NODE;
}
#endif /* CONFIG_NUMA */
#ifdef CONFIG_X86_32
@ -37,14 +61,12 @@ static inline void set_apicid_to_node(int apicid, s16 node)
#ifdef CONFIG_NUMA
extern void __cpuinit numa_set_node(int cpu, int node);
extern void __cpuinit numa_clear_node(int cpu);
extern void __init numa_init_array(void);
extern void __init init_cpu_to_node(void);
extern void __cpuinit numa_add_cpu(int cpu);
extern void __cpuinit numa_remove_cpu(int cpu);
#else /* CONFIG_NUMA */
static inline void numa_set_node(int cpu, int node) { }
static inline void numa_clear_node(int cpu) { }
static inline void numa_init_array(void) { }
static inline void init_cpu_to_node(void) { }
static inline void numa_add_cpu(int cpu) { }
static inline void numa_remove_cpu(int cpu) { }
@ -54,4 +76,10 @@ static inline void numa_remove_cpu(int cpu) { }
void debug_cpumask_set_cpu(int cpu, int node, bool enable);
#endif
#ifdef CONFIG_NUMA_EMU
#define FAKE_NODE_MIN_SIZE ((u64)32 << 20)
#define FAKE_NODE_MIN_HASH_MASK (~(FAKE_NODE_MIN_SIZE - 1UL))
void numa_emu_cmdline(char *);
#endif /* CONFIG_NUMA_EMU */
#endif /* _ASM_X86_NUMA_H */

10
arch/x86/include/asm/numa_32.h
View File

@ -1,16 +1,6 @@
#ifndef _ASM_X86_NUMA_32_H
#define _ASM_X86_NUMA_32_H
extern int numa_off;
extern int pxm_to_nid(int pxm);
#ifdef CONFIG_NUMA
extern int __cpuinit numa_cpu_node(int cpu);
#else /* CONFIG_NUMA */
static inline int numa_cpu_node(int cpu) { return NUMA_NO_NODE; }
#endif /* CONFIG_NUMA */
#ifdef CONFIG_HIGHMEM
extern void set_highmem_pages_init(void);
#else

36
arch/x86/include/asm/numa_64.h
View File

@ -1,42 +1,6 @@
#ifndef _ASM_X86_NUMA_64_H
#define _ASM_X86_NUMA_64_H
#include <linux/nodemask.h>
struct bootnode {
u64 start;
u64 end;
};
#define ZONE_ALIGN (1UL << (MAX_ORDER+PAGE_SHIFT))
extern int numa_off;
extern unsigned long numa_free_all_bootmem(void);
extern void setup_node_bootmem(int nodeid, unsigned long start,
unsigned long end);
#ifdef CONFIG_NUMA
/*
* Too small node sizes may confuse the VM badly. Usually they
* result from BIOS bugs. So dont recognize nodes as standalone
* NUMA entities that have less than this amount of RAM listed:
*/
#define NODE_MIN_SIZE (4*1024*1024)
extern nodemask_t numa_nodes_parsed __initdata;
extern int __cpuinit numa_cpu_node(int cpu);
extern int __init numa_add_memblk(int nodeid, u64 start, u64 end);
extern void __init numa_set_distance(int from, int to, int distance);
#ifdef CONFIG_NUMA_EMU
#define FAKE_NODE_MIN_SIZE ((u64)32 << 20)
#define FAKE_NODE_MIN_HASH_MASK (~(FAKE_NODE_MIN_SIZE - 1UL))
void numa_emu_cmdline(char *);
#endif /* CONFIG_NUMA_EMU */
#else
static inline int numa_cpu_node(int cpu) { return NUMA_NO_NODE; }
#endif
#endif /* _ASM_X86_NUMA_64_H */

7
arch/x86/include/asm/numaq.h
View File

@ -29,7 +29,7 @@
#ifdef CONFIG_X86_NUMAQ
extern int found_numaq;
extern int get_memcfg_numaq(void);
extern int numaq_numa_init(void);
extern int pci_numaq_init(void);
extern void *xquad_portio;
@ -166,11 +166,6 @@ struct sys_cfg_data {
void numaq_tsc_disable(void);
#else
static inline int get_memcfg_numaq(void)
{
return 0;
}
#endif /* CONFIG_X86_NUMAQ */
#endif /* _ASM_X86_NUMAQ_H */

27
arch/x86/include/asm/percpu.h
View File

@ -542,6 +542,33 @@ do { \
old__; \
})
static __always_inline int x86_this_cpu_constant_test_bit(unsigned int nr,
const unsigned long __percpu *addr)
{
unsigned long __percpu *a = (unsigned long *)addr + nr / BITS_PER_LONG;
return ((1UL << (nr % BITS_PER_LONG)) & percpu_read(*a)) != 0;
}
static inline int x86_this_cpu_variable_test_bit(int nr,
const unsigned long __percpu *addr)
{
int oldbit;
asm volatile("bt "__percpu_arg(2)",%1\n\t"
"sbb %0,%0"
: "=r" (oldbit)
: "m" (*(unsigned long *)addr), "Ir" (nr));
return oldbit;
}
#define x86_this_cpu_test_bit(nr, addr) \
(__builtin_constant_p((nr)) \
? x86_this_cpu_constant_test_bit((nr), (addr)) \
: x86_this_cpu_variable_test_bit((nr), (addr)))
#include <asm-generic/percpu.h>
/* We can use this directly for local CPU (faster). */

39
arch/x86/include/asm/srat.h
View File

@ -1,39 +0,0 @@
/*
* Some of the code in this file has been gleaned from the 64 bit
* discontigmem support code base.
*
* Copyright (C) 2002, IBM Corp.
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to Pat Gaughen <gone@us.ibm.com>
*/
#ifndef _ASM_X86_SRAT_H
#define _ASM_X86_SRAT_H
#ifdef CONFIG_ACPI_NUMA
extern int get_memcfg_from_srat(void);
#else
static inline int get_memcfg_from_srat(void)
{
return 0;
}
#endif
#endif /* _ASM_X86_SRAT_H */

8
arch/x86/include/asm/topology.h
View File

@ -93,19 +93,11 @@ extern void setup_node_to_cpumask_map(void);
#define pcibus_to_node(bus) __pcibus_to_node(bus)
#ifdef CONFIG_X86_32
extern unsigned long node_start_pfn[];
extern unsigned long node_end_pfn[];
extern unsigned long node_remap_size[];
#define node_has_online_mem(nid) (node_start_pfn[nid] != node_end_pfn[nid])
# define SD_CACHE_NICE_TRIES 1
# define SD_IDLE_IDX 1
#else
# define SD_CACHE_NICE_TRIES 2
# define SD_IDLE_IDX 2
#endif
/* sched_domains SD_NODE_INIT for NUMA machines */

28
arch/x86/kernel/apic/apic.c
View File

@ -505,7 +505,7 @@ static void __cpuinit setup_APIC_timer(void)
{
struct clock_event_device *levt = &__get_cpu_var(lapic_events);
if (cpu_has(__this_cpu_ptr(&cpu_info), X86_FEATURE_ARAT)) {
if (this_cpu_has(X86_FEATURE_ARAT)) {
lapic_clockevent.features &= ~CLOCK_EVT_FEAT_C3STOP;
/* Make LAPIC timer preferrable over percpu HPET */
lapic_clockevent.rating = 150;
@ -1237,6 +1237,17 @@ void __cpuinit setup_local_APIC(void)
/* always use the value from LDR */
early_per_cpu(x86_cpu_to_logical_apicid, cpu) =
logical_smp_processor_id();
/*
* Some NUMA implementations (NUMAQ) don't initialize apicid to
* node mapping during NUMA init. Now that logical apicid is
* guaranteed to be known, give it another chance. This is already
* a bit too late - percpu allocation has already happened without
* proper NUMA affinity.
*/
if (apic->x86_32_numa_cpu_node)
set_apicid_to_node(early_per_cpu(x86_cpu_to_apicid, cpu),
apic->x86_32_numa_cpu_node(cpu));
#endif
/*
@ -2014,21 +2025,6 @@ void default_init_apic_ldr(void)
apic_write(APIC_LDR, val);
}
#ifdef CONFIG_X86_32
int default_x86_32_numa_cpu_node(int cpu)
{
#ifdef CONFIG_NUMA
int apicid = early_per_cpu(x86_cpu_to_apicid, cpu);
if (apicid != BAD_APICID)
return __apicid_to_node[apicid];
return NUMA_NO_NODE;
#else
return 0;
#endif
}
#endif
/*
* Power management
*/

9
arch/x86/kernel/apic/apic_noop.c
View File

@ -119,14 +119,6 @@ static void noop_apic_write(u32 reg, u32 v)
WARN_ON_ONCE(cpu_has_apic && !disable_apic);
}
#ifdef CONFIG_X86_32
static int noop_x86_32_numa_cpu_node(int cpu)
{
/* we're always on node 0 */
return 0;
}
#endif
struct apic apic_noop = {
.name = "noop",
.probe = noop_probe,
@ -195,6 +187,5 @@ struct apic apic_noop = {
#ifdef CONFIG_X86_32
.x86_32_early_logical_apicid = noop_x86_32_early_logical_apicid,
.x86_32_numa_cpu_node = noop_x86_32_numa_cpu_node,
#endif
};

1
arch/x86/kernel/apic/bigsmp_32.c
View File

@ -253,5 +253,4 @@ struct apic apic_bigsmp = {
.safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
.x86_32_early_logical_apicid = bigsmp_early_logical_apicid,
.x86_32_numa_cpu_node = default_x86_32_numa_cpu_node,
};

7
arch/x86/kernel/apic/es7000_32.c
View File

@ -510,11 +510,6 @@ static void es7000_setup_apic_routing(void)
nr_ioapics, cpumask_bits(es7000_target_cpus())[0]);
}
static int es7000_numa_cpu_node(int cpu)
{
return 0;
}
static int es7000_cpu_present_to_apicid(int mps_cpu)
{
if (!mps_cpu)
@ -688,7 +683,6 @@ struct apic __refdata apic_es7000_cluster = {
.safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
.x86_32_early_logical_apicid = es7000_early_logical_apicid,
.x86_32_numa_cpu_node = es7000_numa_cpu_node,
};
struct apic __refdata apic_es7000 = {
@ -752,5 +746,4 @@ struct apic __refdata apic_es7000 = {
.safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
.x86_32_early_logical_apicid = es7000_early_logical_apicid,
.x86_32_numa_cpu_node = es7000_numa_cpu_node,
};

34
arch/x86/kernel/apic/numaq_32.c
View File

@ -48,8 +48,6 @@
#include <asm/e820.h>
#include <asm/ipi.h>
#define MB_TO_PAGES(addr) ((addr) << (20 - PAGE_SHIFT))
int found_numaq;
/*
@ -79,31 +77,20 @@ int quad_local_to_mp_bus_id[NR_CPUS/4][4];
static inline void numaq_register_node(int node, struct sys_cfg_data *scd)
{
struct eachquadmem *eq = scd->eq + node;
u64 start = (u64)(eq->hi_shrd_mem_start - eq->priv_mem_size) << 20;
u64 end = (u64)(eq->hi_shrd_mem_start + eq->hi_shrd_mem_size) << 20;
int ret;
node_set_online(node);
/* Convert to pages */
node_start_pfn[node] =
MB_TO_PAGES(eq->hi_shrd_mem_start - eq->priv_mem_size);
node_end_pfn[node] =
MB_TO_PAGES(eq->hi_shrd_mem_start + eq->hi_shrd_mem_size);
memblock_x86_register_active_regions(node, node_start_pfn[node],
node_end_pfn[node]);
memory_present(node, node_start_pfn[node], node_end_pfn[node]);
node_remap_size[node] = node_memmap_size_bytes(node,
node_start_pfn[node],
node_end_pfn[node]);
node_set(node, numa_nodes_parsed);
ret = numa_add_memblk(node, start, end);
BUG_ON(ret < 0);
}
/*
* Function: smp_dump_qct()
*
* Description: gets memory layout from the quad config table. This
* function also updates node_online_map with the nodes (quads) present.
* function also updates numa_nodes_parsed with the nodes (quads) present.
*/
static void __init smp_dump_qct(void)
{
@ -112,7 +99,6 @@ static void __init smp_dump_qct(void)
scd = (void *)__va(SYS_CFG_DATA_PRIV_ADDR);
nodes_clear(node_online_map);
for_each_node(node) {
if (scd->quads_present31_0 & (1 << node))
numaq_register_node(node, scd);
@ -282,14 +268,14 @@ static __init void early_check_numaq(void)
}
}
int __init get_memcfg_numaq(void)
int __init numaq_numa_init(void)
{
early_check_numaq();
if (!found_numaq)
return 0;
return -ENOENT;
smp_dump_qct();
return 1;
return 0;
}
#define NUMAQ_APIC_DFR_VALUE (APIC_DFR_CLUSTER)

1
arch/x86/kernel/apic/probe_32.c
View File

@ -172,7 +172,6 @@ struct apic apic_default = {
.safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
.x86_32_early_logical_apicid = default_x86_32_early_logical_apicid,
.x86_32_numa_cpu_node = default_x86_32_numa_cpu_node,
};
extern struct apic apic_numaq;

1
arch/x86/kernel/apic/summit_32.c
View File

@ -551,5 +551,4 @@ struct apic apic_summit = {
.safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
.x86_32_early_logical_apicid = summit_early_logical_apicid,
.x86_32_numa_cpu_node = default_x86_32_numa_cpu_node,
};

7
arch/x86/kernel/cpu/mcheck/therm_throt.c
View File

@ -353,7 +353,6 @@ static void notify_thresholds(__u64 msr_val)
static void intel_thermal_interrupt(void)
{
__u64 msr_val;
struct cpuinfo_x86 *c = &cpu_data(smp_processor_id());
rdmsrl(MSR_IA32_THERM_STATUS, msr_val);
@ -365,19 +364,19 @@ static void intel_thermal_interrupt(void)
CORE_LEVEL) != 0)
mce_log_therm_throt_event(CORE_THROTTLED | msr_val);
if (cpu_has(c, X86_FEATURE_PLN))
if (this_cpu_has(X86_FEATURE_PLN))
if (therm_throt_process(msr_val & THERM_STATUS_POWER_LIMIT,
POWER_LIMIT_EVENT,
CORE_LEVEL) != 0)
mce_log_therm_throt_event(CORE_POWER_LIMIT | msr_val);
if (cpu_has(c, X86_FEATURE_PTS)) {
if (this_cpu_has(X86_FEATURE_PTS)) {
rdmsrl(MSR_IA32_PACKAGE_THERM_STATUS, msr_val);
if (therm_throt_process(msr_val & PACKAGE_THERM_STATUS_PROCHOT,
THERMAL_THROTTLING_EVENT,
PACKAGE_LEVEL) != 0)
mce_log_therm_throt_event(PACKAGE_THROTTLED | msr_val);
if (cpu_has(c, X86_FEATURE_PLN))
if (this_cpu_has(X86_FEATURE_PLN))
if (therm_throt_process(msr_val &
PACKAGE_THERM_STATUS_POWER_LIMIT,
POWER_LIMIT_EVENT,

2
arch/x86/kernel/mpparse.c
View File

@ -715,7 +715,7 @@ static void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare)
}
}
static int
static int __init
check_slot(unsigned long mpc_new_phys, unsigned long mpc_new_length, int count)
{
if (!mpc_new_phys || count <= mpc_new_length) {

4
arch/x86/kernel/process.c
View File

@ -449,7 +449,7 @@ EXPORT_SYMBOL_GPL(cpu_idle_wait);
void mwait_idle_with_hints(unsigned long ax, unsigned long cx)
{
if (!need_resched()) {
if (cpu_has(__this_cpu_ptr(&cpu_info), X86_FEATURE_CLFLUSH_MONITOR))
if (this_cpu_has(X86_FEATURE_CLFLUSH_MONITOR))
clflush((void *)&current_thread_info()->flags);
__monitor((void *)&current_thread_info()->flags, 0, 0);
@ -465,7 +465,7 @@ static void mwait_idle(void)
if (!need_resched()) {
trace_power_start(POWER_CSTATE, 1, smp_processor_id());
trace_cpu_idle(1, smp_processor_id());
if (cpu_has(__this_cpu_ptr(&cpu_info), X86_FEATURE_CLFLUSH_MONITOR))
if (this_cpu_has(X86_FEATURE_CLFLUSH_MONITOR))
clflush((void *)&current_thread_info()->flags);
__monitor((void *)&current_thread_info()->flags, 0, 0);

4
arch/x86/kernel/smpboot.c
View File

@ -1332,9 +1332,9 @@ static inline void mwait_play_dead(void)
void *mwait_ptr;
struct cpuinfo_x86 *c = __this_cpu_ptr(&cpu_info);
if (!(cpu_has(c, X86_FEATURE_MWAIT) && mwait_usable(c)))
if (!this_cpu_has(X86_FEATURE_MWAIT) && mwait_usable(c))
return;
if (!cpu_has(__this_cpu_ptr(&cpu_info), X86_FEATURE_CLFLSH))
if (!this_cpu_has(X86_FEATURE_CLFLSH))
return;
if (__this_cpu_read(cpu_info.cpuid_level) < CPUID_MWAIT_LEAF)
return;

4
arch/x86/mm/Makefile
View File

@ -23,8 +23,8 @@ mmiotrace-y := kmmio.o pf_in.o mmio-mod.o
obj-$(CONFIG_MMIOTRACE_TEST) += testmmiotrace.o
obj-$(CONFIG_NUMA) += numa.o numa_$(BITS).o
obj-$(CONFIG_AMD_NUMA) += amdtopology_64.o
obj-$(CONFIG_ACPI_NUMA) += srat_$(BITS).o
obj-$(CONFIG_AMD_NUMA) += amdtopology.o
obj-$(CONFIG_ACPI_NUMA) += srat.o
obj-$(CONFIG_NUMA_EMU) += numa_emulation.o
obj-$(CONFIG_HAVE_MEMBLOCK) += memblock.o

21
arch/x86/mm/amdtopology_64.c → arch/x86/mm/amdtopology.c
View File

@ -12,6 +12,7 @@
#include <linux/module.h>
#include <linux/nodemask.h>
#include <linux/memblock.h>
#include <linux/bootmem.h>
#include <asm/io.h>
#include <linux/pci_ids.h>
@ -69,10 +70,10 @@ static __init void early_get_boot_cpu_id(void)
int __init amd_numa_init(void)
{
unsigned long start = PFN_PHYS(0);
unsigned long end = PFN_PHYS(max_pfn);
u64 start = PFN_PHYS(0);
u64 end = PFN_PHYS(max_pfn);
unsigned numnodes;
unsigned long prevbase;
u64 prevbase;
int i, j, nb;
u32 nodeid, reg;
unsigned int bits, cores, apicid_base;
@ -95,7 +96,7 @@ int __init amd_numa_init(void)
prevbase = 0;
for (i = 0; i < 8; i++) {
unsigned long base, limit;
u64 base, limit;
base = read_pci_config(0, nb, 1, 0x40 + i*8);
limit = read_pci_config(0, nb, 1, 0x44 + i*8);
@ -107,18 +108,18 @@ int __init amd_numa_init(void)
continue;
}
if (nodeid >= numnodes) {
pr_info("Ignoring excess node %d (%lx:%lx)\n", nodeid,
pr_info("Ignoring excess node %d (%Lx:%Lx)\n", nodeid,
base, limit);
continue;
}
if (!limit) {
pr_info("Skipping node entry %d (base %lx)\n",
pr_info("Skipping node entry %d (base %Lx)\n",
i, base);
continue;
}
if ((base >> 8) & 3 || (limit >> 8) & 3) {
pr_err("Node %d using interleaving mode %lx/%lx\n",
pr_err("Node %d using interleaving mode %Lx/%Lx\n",
nodeid, (base >> 8) & 3, (limit >> 8) & 3);
return -EINVAL;
}
@ -150,19 +151,19 @@ int __init amd_numa_init(void)
continue;
}
if (limit < base) {
pr_err("Node %d bogus settings %lx-%lx.\n",
pr_err("Node %d bogus settings %Lx-%Lx.\n",
nodeid, base, limit);
continue;
}
/* Could sort here, but pun for now. Should not happen anyroads. */
if (prevbase > base) {
pr_err("Node map not sorted %lx,%lx\n",
pr_err("Node map not sorted %Lx,%Lx\n",
prevbase, base);
return -EINVAL;
}
pr_info("Node %d MemBase %016lx Limit %016lx\n",
pr_info("Node %d MemBase %016Lx Limit %016Lx\n",
nodeid, base, limit);
prevbase = base;

3
arch/x86/mm/init_32.c
View File

@ -678,8 +678,10 @@ static void __init zone_sizes_init(void)
{
unsigned long max_zone_pfns[MAX_NR_ZONES];
memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
#ifdef CONFIG_ZONE_DMA
max_zone_pfns[ZONE_DMA] =
virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
#endif
max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
#ifdef CONFIG_HIGHMEM
max_zone_pfns[ZONE_HIGHMEM] = highend_pfn;
@ -716,6 +718,7 @@ void __init paging_init(void)
* NOTE: at this point the bootmem allocator is fully available.
*/
olpc_dt_build_devicetree();
sparse_memory_present_with_active_regions(MAX_NUMNODES);
sparse_init();
zone_sizes_init();
}

10
arch/x86/mm/init_64.c
View File

@ -616,7 +616,9 @@ void __init paging_init(void)
unsigned long max_zone_pfns[MAX_NR_ZONES];
memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
#ifdef CONFIG_ZONE_DMA
max_zone_pfns[ZONE_DMA] = MAX_DMA_PFN;
#endif
max_zone_pfns[ZONE_DMA32] = MAX_DMA32_PFN;
max_zone_pfns[ZONE_NORMAL] = max_pfn;
@ -679,14 +681,6 @@ int arch_add_memory(int nid, u64 start, u64 size)
}
EXPORT_SYMBOL_GPL(arch_add_memory);
#if !defined(CONFIG_ACPI_NUMA) && defined(CONFIG_NUMA)
int memory_add_physaddr_to_nid(u64 start)
{
return 0;
}
EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
#endif
#endif /* CONFIG_MEMORY_HOTPLUG */
static struct kcore_list kcore_vsyscall;

14
arch/x86/mm/ioremap.c
View File

@ -90,13 +90,6 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr,
if (is_ISA_range(phys_addr, last_addr))
return (__force void __iomem *)phys_to_virt(phys_addr);
/*
* Check if the request spans more than any BAR in the iomem resource
* tree.
*/
WARN_ONCE(iomem_map_sanity_check(phys_addr, size),
KERN_INFO "Info: mapping multiple BARs. Your kernel is fine.");
/*
* Don't allow anybody to remap normal RAM that we're using..
*/
@ -170,6 +163,13 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr,
ret_addr = (void __iomem *) (vaddr + offset);
mmiotrace_ioremap(unaligned_phys_addr, unaligned_size, ret_addr);
/*
* Check if the request spans more than any BAR in the iomem resource
* tree.
*/
WARN_ONCE(iomem_map_sanity_check(unaligned_phys_addr, unaligned_size),
KERN_INFO "Info: mapping multiple BARs. Your kernel is fine.");
return ret_addr;
err_free_area:
free_vm_area(area);

550
arch/x86/mm/numa.c
View File

@ -1,11 +1,39 @@
/* Common code for 32 and 64-bit NUMA */
#include <linux/topology.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/bootmem.h>
#include <asm/numa.h>
#include <linux/memblock.h>
#include <linux/mmzone.h>
#include <linux/ctype.h>
#include <linux/module.h>
#include <linux/nodemask.h>
#include <linux/sched.h>
#include <linux/topology.h>
#include <asm/e820.h>
#include <asm/proto.h>
#include <asm/dma.h>
#include <asm/acpi.h>
#include <asm/amd_nb.h>
#include "numa_internal.h"
int __initdata numa_off;
nodemask_t numa_nodes_parsed __initdata;
struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
EXPORT_SYMBOL(node_data);
static struct numa_meminfo numa_meminfo
#ifndef CONFIG_MEMORY_HOTPLUG
__initdata
#endif
;
static int numa_distance_cnt;
static u8 *numa_distance;
static __init int numa_setup(char *opt)
{
@ -32,6 +60,15 @@ s16 __apicid_to_node[MAX_LOCAL_APIC] __cpuinitdata = {
[0 ... MAX_LOCAL_APIC-1] = NUMA_NO_NODE
};
int __cpuinit numa_cpu_node(int cpu)
{
int apicid = early_per_cpu(x86_cpu_to_apicid, cpu);
if (apicid != BAD_APICID)
return __apicid_to_node[apicid];
return NUMA_NO_NODE;
}
cpumask_var_t node_to_cpumask_map[MAX_NUMNODES];
EXPORT_SYMBOL(node_to_cpumask_map);
@ -95,6 +132,407 @@ void __init setup_node_to_cpumask_map(void)
pr_debug("Node to cpumask map for %d nodes\n", nr_node_ids);
}
static int __init numa_add_memblk_to(int nid, u64 start, u64 end,
struct numa_meminfo *mi)
{
/* ignore zero length blks */
if (start == end)
return 0;
/* whine about and ignore invalid blks */
if (start > end || nid < 0 || nid >= MAX_NUMNODES) {
pr_warning("NUMA: Warning: invalid memblk node %d (%Lx-%Lx)\n",
nid, start, end);
return 0;
}
if (mi->nr_blks >= NR_NODE_MEMBLKS) {
pr_err("NUMA: too many memblk ranges\n");
return -EINVAL;
}
mi->blk[mi->nr_blks].start = start;
mi->blk[mi->nr_blks].end = end;
mi->blk[mi->nr_blks].nid = nid;
mi->nr_blks++;
return 0;
}
/**
* numa_remove_memblk_from - Remove one numa_memblk from a numa_meminfo
* @idx: Index of memblk to remove
* @mi: numa_meminfo to remove memblk from
*
* Remove @idx'th numa_memblk from @mi by shifting @mi->blk[] and
* decrementing @mi->nr_blks.
*/
void __init numa_remove_memblk_from(int idx, struct numa_meminfo *mi)
{
mi->nr_blks--;
memmove(&mi->blk[idx], &mi->blk[idx + 1],
(mi->nr_blks - idx) * sizeof(mi->blk[0]));
}
/**
* numa_add_memblk - Add one numa_memblk to numa_meminfo
* @nid: NUMA node ID of the new memblk
* @start: Start address of the new memblk
* @end: End address of the new memblk
*
* Add a new memblk to the default numa_meminfo.
*
* RETURNS:
* 0 on success, -errno on failure.
*/
int __init numa_add_memblk(int nid, u64 start, u64 end)
{
return numa_add_memblk_to(nid, start, end, &numa_meminfo);
}
/* Initialize NODE_DATA for a node on the local memory */
static void __init setup_node_data(int nid, u64 start, u64 end)
{
const u64 nd_low = PFN_PHYS(MAX_DMA_PFN);
const u64 nd_high = PFN_PHYS(max_pfn_mapped);
const size_t nd_size = roundup(sizeof(pg_data_t), PAGE_SIZE);
bool remapped = false;
u64 nd_pa;
void *nd;
int tnid;
/*
* Don't confuse VM with a node that doesn't have the
* minimum amount of memory:
*/
if (end && (end - start) < NODE_MIN_SIZE)
return;
/* initialize remap allocator before aligning to ZONE_ALIGN */
init_alloc_remap(nid, start, end);
start = roundup(start, ZONE_ALIGN);
printk(KERN_INFO "Initmem setup node %d %016Lx-%016Lx\n",
nid, start, end);
/*
* Allocate node data. Try remap allocator first, node-local
* memory and then any node. Never allocate in DMA zone.
*/
nd = alloc_remap(nid, nd_size);
if (nd) {
nd_pa = __pa(nd);
remapped = true;
} else {
nd_pa = memblock_x86_find_in_range_node(nid, nd_low, nd_high,
nd_size, SMP_CACHE_BYTES);
if (nd_pa == MEMBLOCK_ERROR)
nd_pa = memblock_find_in_range(nd_low, nd_high,
nd_size, SMP_CACHE_BYTES);
if (nd_pa == MEMBLOCK_ERROR) {
pr_err("Cannot find %zu bytes in node %d\n",
nd_size, nid);
return;
}
memblock_x86_reserve_range(nd_pa, nd_pa + nd_size, "NODE_DATA");
nd = __va(nd_pa);
}
/* report and initialize */
printk(KERN_INFO " NODE_DATA [%016Lx - %016Lx]%s\n",
nd_pa, nd_pa + nd_size - 1, remapped ? " (remapped)" : "");
tnid = early_pfn_to_nid(nd_pa >> PAGE_SHIFT);
if (!remapped && tnid != nid)
printk(KERN_INFO " NODE_DATA(%d) on node %d\n", nid, tnid);
node_data[nid] = nd;
memset(NODE_DATA(nid), 0, sizeof(pg_data_t));
NODE_DATA(nid)->node_id = nid;
NODE_DATA(nid)->node_start_pfn = start >> PAGE_SHIFT;
NODE_DATA(nid)->node_spanned_pages = (end - start) >> PAGE_SHIFT;
node_set_online(nid);
}
/**
* numa_cleanup_meminfo - Cleanup a numa_meminfo
* @mi: numa_meminfo to clean up
*
* Sanitize @mi by merging and removing unncessary memblks. Also check for
* conflicts and clear unused memblks.
*
* RETURNS:
* 0 on success, -errno on failure.
*/
int __init numa_cleanup_meminfo(struct numa_meminfo *mi)
{
const u64 low = 0;
const u64 high = PFN_PHYS(max_pfn);
int i, j, k;
/* first, trim all entries */
for (i = 0; i < mi->nr_blks; i++) {
struct numa_memblk *bi = &mi->blk[i];
/* make sure all blocks are inside the limits */
bi->start = max(bi->start, low);
bi->end = min(bi->end, high);
/* and there's no empty block */
if (bi->start >= bi->end)
numa_remove_memblk_from(i--, mi);
}
/* merge neighboring / overlapping entries */
for (i = 0; i < mi->nr_blks; i++) {
struct numa_memblk *bi = &mi->blk[i];
for (j = i + 1; j < mi->nr_blks; j++) {
struct numa_memblk *bj = &mi->blk[j];
u64 start, end;
/*
* See whether there are overlapping blocks. Whine
* about but allow overlaps of the same nid. They
* will be merged below.
*/
if (bi->end > bj->start && bi->start < bj->end) {
if (bi->nid != bj->nid) {
pr_err("NUMA: node %d (%Lx-%Lx) overlaps with node %d (%Lx-%Lx)\n",
bi->nid, bi->start, bi->end,
bj->nid, bj->start, bj->end);
return -EINVAL;
}
pr_warning("NUMA: Warning: node %d (%Lx-%Lx) overlaps with itself (%Lx-%Lx)\n",
bi->nid, bi->start, bi->end,
bj->start, bj->end);
}
/*
* Join together blocks on the same node, holes
* between which don't overlap with memory on other
* nodes.
*/
if (bi->nid != bj->nid)
continue;
start = min(bi->start, bj->start);
end = max(bi->end, bj->end);
for (k = 0; k < mi->nr_blks; k++) {
struct numa_memblk *bk = &mi->blk[k];
if (bi->nid == bk->nid)
continue;
if (start < bk->end && end > bk->start)
break;
}
if (k < mi->nr_blks)
continue;
printk(KERN_INFO "NUMA: Node %d [%Lx,%Lx) + [%Lx,%Lx) -> [%Lx,%Lx)\n",
bi->nid, bi->start, bi->end, bj->start, bj->end,
start, end);
bi->start = start;
bi->end = end;
numa_remove_memblk_from(j--, mi);
}
}
/* clear unused ones */
for (i = mi->nr_blks; i < ARRAY_SIZE(mi->blk); i++) {
mi->blk[i].start = mi->blk[i].end = 0;
mi->blk[i].nid = NUMA_NO_NODE;
}
return 0;
}
/*
* Set nodes, which have memory in @mi, in *@nodemask.
*/
static void __init numa_nodemask_from_meminfo(nodemask_t *nodemask,
const struct numa_meminfo *mi)
{
int i;
for (i = 0; i < ARRAY_SIZE(mi->blk); i++)
if (mi->blk[i].start != mi->blk[i].end &&
mi->blk[i].nid != NUMA_NO_NODE)
node_set(mi->blk[i].nid, *nodemask);
}
/**
* numa_reset_distance - Reset NUMA distance table
*
* The current table is freed. The next numa_set_distance() call will
* create a new one.
*/
void __init numa_reset_distance(void)
{
size_t size = numa_distance_cnt * numa_distance_cnt * sizeof(numa_distance[0]);
/* numa_distance could be 1LU marking allocation failure, test cnt */
if (numa_distance_cnt)
memblock_x86_free_range(__pa(numa_distance),
__pa(numa_distance) + size);
numa_distance_cnt = 0;
numa_distance = NULL; /* enable table creation */
}
static int __init numa_alloc_distance(void)
{
nodemask_t nodes_parsed;
size_t size;
int i, j, cnt = 0;
u64 phys;
/* size the new table and allocate it */
nodes_parsed = numa_nodes_parsed;
numa_nodemask_from_meminfo(&nodes_parsed, &numa_meminfo);
for_each_node_mask(i, nodes_parsed)
cnt = i;
cnt++;
size = cnt * cnt * sizeof(numa_distance[0]);
phys = memblock_find_in_range(0, PFN_PHYS(max_pfn_mapped),
size, PAGE_SIZE);
if (phys == MEMBLOCK_ERROR) {
pr_warning("NUMA: Warning: can't allocate distance table!\n");
/* don't retry until explicitly reset */
numa_distance = (void *)1LU;
return -ENOMEM;
}
memblock_x86_reserve_range(phys, phys + size, "NUMA DIST");
numa_distance = __va(phys);
numa_distance_cnt = cnt;
/* fill with the default distances */
for (i = 0; i < cnt; i++)
for (j = 0; j < cnt; j++)
numa_distance[i * cnt + j] = i == j ?
LOCAL_DISTANCE : REMOTE_DISTANCE;
printk(KERN_DEBUG "NUMA: Initialized distance table, cnt=%d\n", cnt);
return 0;
}
/**
* numa_set_distance - Set NUMA distance from one NUMA to another
* @from: the 'from' node to set distance
* @to: the 'to' node to set distance
* @distance: NUMA distance
*
* Set the distance from node @from to @to to @distance. If distance table
* doesn't exist, one which is large enough to accommodate all the currently
* known nodes will be created.
*
* If such table cannot be allocated, a warning is printed and further
* calls are ignored until the distance table is reset with
* numa_reset_distance().
*
* If @from or @to is higher than the highest known node at the time of
* table creation or @distance doesn't make sense, the call is ignored.
* This is to allow simplification of specific NUMA config implementations.
*/
void __init numa_set_distance(int from, int to, int distance)
{
if (!numa_distance && numa_alloc_distance() < 0)
return;
if (from >= numa_distance_cnt || to >= numa_distance_cnt) {
printk_once(KERN_DEBUG "NUMA: Debug: distance out of bound, from=%d to=%d distance=%d\n",
from, to, distance);
return;
}
if ((u8)distance != distance ||
(from == to && distance != LOCAL_DISTANCE)) {
pr_warn_once("NUMA: Warning: invalid distance parameter, from=%d to=%d distance=%d\n",
from, to, distance);
return;
}
numa_distance[from * numa_distance_cnt + to] = distance;
}
int __node_distance(int from, int to)
{
if (from >= numa_distance_cnt || to >= numa_distance_cnt)
return from == to ? LOCAL_DISTANCE : REMOTE_DISTANCE;
return numa_distance[from * numa_distance_cnt + to];
}
EXPORT_SYMBOL(__node_distance);
/*
* Sanity check to catch more bad NUMA configurations (they are amazingly
* common). Make sure the nodes cover all memory.
*/
static bool __init numa_meminfo_cover_memory(const struct numa_meminfo *mi)
{
u64 numaram, e820ram;
int i;
numaram = 0;
for (i = 0; i < mi->nr_blks; i++) {
u64 s = mi->blk[i].start >> PAGE_SHIFT;
u64 e = mi->blk[i].end >> PAGE_SHIFT;
numaram += e - s;
numaram -= __absent_pages_in_range(mi->blk[i].nid, s, e);
if ((s64)numaram < 0)
numaram = 0;
}
e820ram = max_pfn - (memblock_x86_hole_size(0,
PFN_PHYS(max_pfn)) >> PAGE_SHIFT);
/* We seem to lose 3 pages somewhere. Allow 1M of slack. */
if ((s64)(e820ram - numaram) >= (1 << (20 - PAGE_SHIFT))) {
printk(KERN_ERR "NUMA: nodes only cover %LuMB of your %LuMB e820 RAM. Not used.\n",
(numaram << PAGE_SHIFT) >> 20,
(e820ram << PAGE_SHIFT) >> 20);
return false;
}
return true;
}
static int __init numa_register_memblks(struct numa_meminfo *mi)
{
int i, nid;
/* Account for nodes with cpus and no memory */
node_possible_map = numa_nodes_parsed;
numa_nodemask_from_meminfo(&node_possible_map, mi);
if (WARN_ON(nodes_empty(node_possible_map)))
return -EINVAL;
for (i = 0; i < mi->nr_blks; i++)
memblock_x86_register_active_regions(mi->blk[i].nid,
mi->blk[i].start >> PAGE_SHIFT,
mi->blk[i].end >> PAGE_SHIFT);
/* for out of order entries */
sort_node_map();
if (!numa_meminfo_cover_memory(mi))
return -EINVAL;
/* Finally register nodes. */
for_each_node_mask(nid, node_possible_map) {
u64 start = PFN_PHYS(max_pfn);
u64 end = 0;
for (i = 0; i < mi->nr_blks; i++) {
if (nid != mi->blk[i].nid)
continue;
start = min(mi->blk[i].start, start);
end = max(mi->blk[i].end, end);
}
if (start < end)
setup_node_data(nid, start, end);
}
return 0;
}
/*
* There are unfortunately some poorly designed mainboards around that
* only connect memory to a single CPU. This breaks the 1:1 cpu->node
@ -102,7 +540,7 @@ void __init setup_node_to_cpumask_map(void)
* as the number of CPUs is not known yet. We round robin the existing
* nodes.
*/
void __init numa_init_array(void)
static void __init numa_init_array(void)
{
int rr, i;
@ -117,6 +555,95 @@ void __init numa_init_array(void)
}
}
static int __init numa_init(int (*init_func)(void))
{
int i;
int ret;
for (i = 0; i < MAX_LOCAL_APIC; i++)
set_apicid_to_node(i, NUMA_NO_NODE);
nodes_clear(numa_nodes_parsed);
nodes_clear(node_possible_map);
nodes_clear(node_online_map);
memset(&numa_meminfo, 0, sizeof(numa_meminfo));
remove_all_active_ranges();
numa_reset_distance();
ret = init_func();
if (ret < 0)
return ret;
ret = numa_cleanup_meminfo(&numa_meminfo);
if (ret < 0)
return ret;
numa_emulation(&numa_meminfo, numa_distance_cnt);
ret = numa_register_memblks(&numa_meminfo);
if (ret < 0)
return ret;
for (i = 0; i < nr_cpu_ids; i++) {
int nid = early_cpu_to_node(i);
if (nid == NUMA_NO_NODE)
continue;
if (!node_online(nid))
numa_clear_node(i);
}
numa_init_array();
return 0;
}
/**
* dummy_numa_init - Fallback dummy NUMA init
*
* Used if there's no underlying NUMA architecture, NUMA initialization
* fails, or NUMA is disabled on the command line.
*
* Must online at least one node and add memory blocks that cover all
* allowed memory. This function must not fail.
*/
static int __init dummy_numa_init(void)
{
printk(KERN_INFO "%s\n",
numa_off ? "NUMA turned off" : "No NUMA configuration found");
printk(KERN_INFO "Faking a node at %016Lx-%016Lx\n",
0LLU, PFN_PHYS(max_pfn));
node_set(0, numa_nodes_parsed);
numa_add_memblk(0, 0, PFN_PHYS(max_pfn));
return 0;
}
/**
* x86_numa_init - Initialize NUMA
*
* Try each configured NUMA initialization method until one succeeds. The
* last fallback is dummy single node config encomapssing whole memory and
* never fails.
*/
void __init x86_numa_init(void)
{
if (!numa_off) {
#ifdef CONFIG_X86_NUMAQ
if (!numa_init(numaq_numa_init))
return;
#endif
#ifdef CONFIG_ACPI_NUMA
if (!numa_init(x86_acpi_numa_init))
return;
#endif
#ifdef CONFIG_AMD_NUMA
if (!numa_init(amd_numa_init))
return;
#endif
}
numa_init(dummy_numa_init);
}
static __init int find_near_online_node(int node)
{
int n, val;
@ -282,3 +809,18 @@ const struct cpumask *cpumask_of_node(int node)
EXPORT_SYMBOL(cpumask_of_node);
#endif /* !CONFIG_DEBUG_PER_CPU_MAPS */
#ifdef CONFIG_MEMORY_HOTPLUG
int memory_add_physaddr_to_nid(u64 start)
{
struct numa_meminfo *mi = &numa_meminfo;
int nid = mi->blk[0].nid;
int i;
for (i = 0; i < mi->nr_blks; i++)
if (mi->blk[i].start <= start && mi->blk[i].end > start)
nid = mi->blk[i].nid;
return nid;
}
EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
#endif

388
arch/x86/mm/numa_32.c
View File

@ -22,39 +22,11 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/mm.h>
#include <linux/bootmem.h>
#include <linux/memblock.h>
#include <linux/mmzone.h>
#include <linux/highmem.h>
#include <linux/initrd.h>
#include <linux/nodemask.h>
#include <linux/module.h>
#include <linux/kexec.h>
#include <linux/pfn.h>
#include <linux/swap.h>
#include <linux/acpi.h>
#include <asm/e820.h>
#include <asm/setup.h>
#include <asm/mmzone.h>
#include <asm/bios_ebda.h>
#include <asm/proto.h>
struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
EXPORT_SYMBOL(node_data);
/*
* numa interface - we expect the numa architecture specific code to have
* populated the following initialisation.
*
* 1) node_online_map - the map of all nodes configured (online) in the system
* 2) node_start_pfn - the starting page frame number for a node
* 3) node_end_pfn - the ending page fram number for a node
*/
unsigned long node_start_pfn[MAX_NUMNODES] __read_mostly;
unsigned long node_end_pfn[MAX_NUMNODES] __read_mostly;
#include "numa_internal.h"
#ifdef CONFIG_DISCONTIGMEM
/*
@ -99,108 +71,46 @@ unsigned long node_memmap_size_bytes(int nid, unsigned long start_pfn,
}
#endif
extern unsigned long find_max_low_pfn(void);
extern unsigned long highend_pfn, highstart_pfn;
#define LARGE_PAGE_BYTES (PTRS_PER_PTE * PAGE_SIZE)
unsigned long node_remap_size[MAX_NUMNODES];
static void *node_remap_start_vaddr[MAX_NUMNODES];
void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags);
static unsigned long kva_start_pfn;
static unsigned long kva_pages;
int __cpuinit numa_cpu_node(int cpu)
{
return apic->x86_32_numa_cpu_node(cpu);
}
/*
* FLAT - support for basic PC memory model with discontig enabled, essentially
* a single node with all available processors in it with a flat
* memory map.
*/
int __init get_memcfg_numa_flat(void)
{
printk(KERN_DEBUG "NUMA - single node, flat memory mode\n");
node_start_pfn[0] = 0;
node_end_pfn[0] = max_pfn;
memblock_x86_register_active_regions(0, 0, max_pfn);
memory_present(0, 0, max_pfn);
node_remap_size[0] = node_memmap_size_bytes(0, 0, max_pfn);
/* Indicate there is one node available. */
nodes_clear(node_online_map);
node_set_online(0);
return 1;
}
/*
* Find the highest page frame number we have available for the node
*/
static void __init propagate_e820_map_node(int nid)
{
if (node_end_pfn[nid] > max_pfn)
node_end_pfn[nid] = max_pfn;
/*
* if a user has given mem=XXXX, then we need to make sure
* that the node _starts_ before that, too, not just ends
*/
if (node_start_pfn[nid] > max_pfn)
node_start_pfn[nid] = max_pfn;
BUG_ON(node_start_pfn[nid] > node_end_pfn[nid]);
}
/*
* Allocate memory for the pg_data_t for this node via a crude pre-bootmem
* method. For node zero take this from the bottom of memory, for
* subsequent nodes place them at node_remap_start_vaddr which contains
* node local data in physically node local memory. See setup_memory()
* for details.
*/
static void __init allocate_pgdat(int nid)
{
char buf[16];
if (node_has_online_mem(nid) && node_remap_start_vaddr[nid])
NODE_DATA(nid) = (pg_data_t *)node_remap_start_vaddr[nid];
else {
unsigned long pgdat_phys;
pgdat_phys = memblock_find_in_range(min_low_pfn<<PAGE_SHIFT,
max_pfn_mapped<<PAGE_SHIFT,
sizeof(pg_data_t),
PAGE_SIZE);
NODE_DATA(nid) = (pg_data_t *)(pfn_to_kaddr(pgdat_phys>>PAGE_SHIFT));
memset(buf, 0, sizeof(buf));
sprintf(buf, "NODE_DATA %d", nid);
memblock_x86_reserve_range(pgdat_phys, pgdat_phys + sizeof(pg_data_t), buf);
}
printk(KERN_DEBUG "allocate_pgdat: node %d NODE_DATA %08lx\n",
nid, (unsigned long)NODE_DATA(nid));
}
/*
* In the DISCONTIGMEM and SPARSEMEM memory model, a portion of the kernel
* virtual address space (KVA) is reserved and portions of nodes are mapped
* using it. This is to allow node-local memory to be allocated for
* structures that would normally require ZONE_NORMAL. The memory is
* allocated with alloc_remap() and callers should be prepared to allocate
* from the bootmem allocator instead.
* Remap memory allocator
*/
static unsigned long node_remap_start_pfn[MAX_NUMNODES];
static void *node_remap_end_vaddr[MAX_NUMNODES];
static void *node_remap_alloc_vaddr[MAX_NUMNODES];
static unsigned long node_remap_offset[MAX_NUMNODES];
/**
* alloc_remap - Allocate remapped memory
* @nid: NUMA node to allocate memory from
* @size: The size of allocation
*
* Allocate @size bytes from the remap area of NUMA node @nid. The
* size of the remap area is predetermined by init_alloc_remap() and
* only the callers considered there should call this function. For
* more info, please read the comment on top of init_alloc_remap().
*
* The caller must be ready to handle allocation failure from this
* function and fall back to regular memory allocator in such cases.
*
* CONTEXT:
* Single CPU early boot context.
*
* RETURNS:
* Pointer to the allocated memory on success, %NULL on failure.
*/
void *alloc_remap(int nid, unsigned long size)
{
void *allocation = node_remap_alloc_vaddr[nid];
size = ALIGN(size, L1_CACHE_BYTES);
if (!allocation || (allocation + size) >= node_remap_end_vaddr[nid])
if (!allocation || (allocation + size) > node_remap_end_vaddr[nid])
return NULL;
node_remap_alloc_vaddr[nid] += size;
@ -209,26 +119,6 @@ void *alloc_remap(int nid, unsigned long size)
return allocation;
}
static void __init remap_numa_kva(void)
{
void *vaddr;
unsigned long pfn;
int node;
for_each_online_node(node) {
printk(KERN_DEBUG "remap_numa_kva: node %d\n", node);
for (pfn=0; pfn < node_remap_size[node]; pfn += PTRS_PER_PTE) {
vaddr = node_remap_start_vaddr[node]+(pfn<<PAGE_SHIFT);
printk(KERN_DEBUG "remap_numa_kva: %08lx to pfn %08lx\n",
(unsigned long)vaddr,
node_remap_start_pfn[node] + pfn);
set_pmd_pfn((ulong) vaddr,
node_remap_start_pfn[node] + pfn,
PAGE_KERNEL_LARGE);
}
}
}
#ifdef CONFIG_HIBERNATION
/**
* resume_map_numa_kva - add KVA mapping to the temporary page tables created
@ -240,15 +130,16 @@ void resume_map_numa_kva(pgd_t *pgd_base)
int node;
for_each_online_node(node) {
unsigned long start_va, start_pfn, size, pfn;
unsigned long start_va, start_pfn, nr_pages, pfn;
start_va = (unsigned long)node_remap_start_vaddr[node];
start_pfn = node_remap_start_pfn[node];
size = node_remap_size[node];
nr_pages = (node_remap_end_vaddr[node] -
node_remap_start_vaddr[node]) >> PAGE_SHIFT;
printk(KERN_DEBUG "%s: node %d\n", __func__, node);
for (pfn = 0; pfn < size; pfn += PTRS_PER_PTE) {
for (pfn = 0; pfn < nr_pages; pfn += PTRS_PER_PTE) {
unsigned long vaddr = start_va + (pfn << PAGE_SHIFT);
pgd_t *pgd = pgd_base + pgd_index(vaddr);
pud_t *pud = pud_offset(pgd, vaddr);
@ -264,132 +155,89 @@ void resume_map_numa_kva(pgd_t *pgd_base)
}
#endif
static __init unsigned long calculate_numa_remap_pages(void)
/**
* init_alloc_remap - Initialize remap allocator for a NUMA node
* @nid: NUMA node to initizlie remap allocator for
*
* NUMA nodes may end up without any lowmem. As allocating pgdat and
* memmap on a different node with lowmem is inefficient, a special
* remap allocator is implemented which can be used by alloc_remap().
*
* For each node, the amount of memory which will be necessary for
* pgdat and memmap is calculated and two memory areas of the size are
* allocated - one in the node and the other in lowmem; then, the area
* in the node is remapped to the lowmem area.
*
* As pgdat and memmap must be allocated in lowmem anyway, this
* doesn't waste lowmem address space; however, the actual lowmem
* which gets remapped over is wasted. The amount shouldn't be
* problematic on machines this feature will be used.
*
* Initialization failure isn't fatal. alloc_remap() is used
* opportunistically and the callers will fall back to other memory
* allocation mechanisms on failure.
*/
void __init init_alloc_remap(int nid, u64 start, u64 end)
{
int nid;
unsigned long size, reserve_pages = 0;
unsigned long start_pfn = start >> PAGE_SHIFT;
unsigned long end_pfn = end >> PAGE_SHIFT;
unsigned long size, pfn;
u64 node_pa, remap_pa;
void *remap_va;
for_each_online_node(nid) {
u64 node_kva_target;
u64 node_kva_final;
/*
* The acpi/srat node info can show hot-add memroy zones where
* memory could be added but not currently present.
*/
printk(KERN_DEBUG "node %d pfn: [%lx - %lx]\n",
nid, start_pfn, end_pfn);
/*
* The acpi/srat node info can show hot-add memroy zones
* where memory could be added but not currently present.
*/
printk(KERN_DEBUG "node %d pfn: [%lx - %lx]\n",
nid, node_start_pfn[nid], node_end_pfn[nid]);
if (node_start_pfn[nid] > max_pfn)
continue;
if (!node_end_pfn[nid])
continue;
if (node_end_pfn[nid] > max_pfn)
node_end_pfn[nid] = max_pfn;
/* calculate the necessary space aligned to large page size */
size = node_memmap_size_bytes(nid, start_pfn, end_pfn);
size += ALIGN(sizeof(pg_data_t), PAGE_SIZE);
size = ALIGN(size, LARGE_PAGE_BYTES);
/* ensure the remap includes space for the pgdat. */
size = node_remap_size[nid] + sizeof(pg_data_t);
/* convert size to large (pmd size) pages, rounding up */
size = (size + LARGE_PAGE_BYTES - 1) / LARGE_PAGE_BYTES;
/* now the roundup is correct, convert to PAGE_SIZE pages */
size = size * PTRS_PER_PTE;
node_kva_target = round_down(node_end_pfn[nid] - size,
PTRS_PER_PTE);
node_kva_target <<= PAGE_SHIFT;
do {
node_kva_final = memblock_find_in_range(node_kva_target,
((u64)node_end_pfn[nid])<<PAGE_SHIFT,
((u64)size)<<PAGE_SHIFT,
LARGE_PAGE_BYTES);
node_kva_target -= LARGE_PAGE_BYTES;
} while (node_kva_final == MEMBLOCK_ERROR &&
(node_kva_target>>PAGE_SHIFT) > (node_start_pfn[nid]));
if (node_kva_final == MEMBLOCK_ERROR)
panic("Can not get kva ram\n");
node_remap_size[nid] = size;
node_remap_offset[nid] = reserve_pages;
reserve_pages += size;
printk(KERN_DEBUG "Reserving %ld pages of KVA for lmem_map of"
" node %d at %llx\n",
size, nid, node_kva_final>>PAGE_SHIFT);
/*
* prevent kva address below max_low_pfn want it on system
* with less memory later.
* layout will be: KVA address , KVA RAM
*
* we are supposed to only record the one less then max_low_pfn
* but we could have some hole in high memory, and it will only
* check page_is_ram(pfn) && !page_is_reserved_early(pfn) to decide
* to use it as free.
* So memblock_x86_reserve_range here, hope we don't run out of that array
*/
memblock_x86_reserve_range(node_kva_final,
node_kva_final+(((u64)size)<<PAGE_SHIFT),
"KVA RAM");
node_remap_start_pfn[nid] = node_kva_final>>PAGE_SHIFT;
/* allocate node memory and the lowmem remap area */
node_pa = memblock_find_in_range(start, end, size, LARGE_PAGE_BYTES);
if (node_pa == MEMBLOCK_ERROR) {
pr_warning("remap_alloc: failed to allocate %lu bytes for node %d\n",
size, nid);
return;
}
printk(KERN_INFO "Reserving total of %lx pages for numa KVA remap\n",
reserve_pages);
return reserve_pages;
}
memblock_x86_reserve_range(node_pa, node_pa + size, "KVA RAM");
static void init_remap_allocator(int nid)
{
node_remap_start_vaddr[nid] = pfn_to_kaddr(
kva_start_pfn + node_remap_offset[nid]);
node_remap_end_vaddr[nid] = node_remap_start_vaddr[nid] +
(node_remap_size[nid] * PAGE_SIZE);
node_remap_alloc_vaddr[nid] = node_remap_start_vaddr[nid] +
ALIGN(sizeof(pg_data_t), PAGE_SIZE);
remap_pa = memblock_find_in_range(min_low_pfn << PAGE_SHIFT,
max_low_pfn << PAGE_SHIFT,
size, LARGE_PAGE_BYTES);
if (remap_pa == MEMBLOCK_ERROR) {
pr_warning("remap_alloc: failed to allocate %lu bytes remap area for node %d\n",
size, nid);
memblock_x86_free_range(node_pa, node_pa + size);
return;
}
memblock_x86_reserve_range(remap_pa, remap_pa + size, "KVA PG");
remap_va = phys_to_virt(remap_pa);
printk(KERN_DEBUG "node %d will remap to vaddr %08lx - %08lx\n", nid,
(ulong) node_remap_start_vaddr[nid],
(ulong) node_remap_end_vaddr[nid]);
/* perform actual remap */
for (pfn = 0; pfn < size >> PAGE_SHIFT; pfn += PTRS_PER_PTE)
set_pmd_pfn((unsigned long)remap_va + (pfn << PAGE_SHIFT),
(node_pa >> PAGE_SHIFT) + pfn,
PAGE_KERNEL_LARGE);
/* initialize remap allocator parameters */
node_remap_start_pfn[nid] = node_pa >> PAGE_SHIFT;
node_remap_start_vaddr[nid] = remap_va;
node_remap_end_vaddr[nid] = remap_va + size;
node_remap_alloc_vaddr[nid] = remap_va;
printk(KERN_DEBUG "remap_alloc: node %d [%08llx-%08llx) -> [%p-%p)\n",
nid, node_pa, node_pa + size, remap_va, remap_va + size);
}
void __init initmem_init(void)
{
int nid;
long kva_target_pfn;
x86_numa_init();
/*
* When mapping a NUMA machine we allocate the node_mem_map arrays
* from node local memory. They are then mapped directly into KVA
* between zone normal and vmalloc space. Calculate the size of
* this space and use it to adjust the boundary between ZONE_NORMAL
* and ZONE_HIGHMEM.
*/
get_memcfg_numa();
numa_init_array();
kva_pages = roundup(calculate_numa_remap_pages(), PTRS_PER_PTE);
kva_target_pfn = round_down(max_low_pfn - kva_pages, PTRS_PER_PTE);
do {
kva_start_pfn = memblock_find_in_range(kva_target_pfn<<PAGE_SHIFT,
max_low_pfn<<PAGE_SHIFT,
kva_pages<<PAGE_SHIFT,
PTRS_PER_PTE<<PAGE_SHIFT) >> PAGE_SHIFT;
kva_target_pfn -= PTRS_PER_PTE;
} while (kva_start_pfn == MEMBLOCK_ERROR && kva_target_pfn > min_low_pfn);
if (kva_start_pfn == MEMBLOCK_ERROR)
panic("Can not get kva space\n");
printk(KERN_INFO "kva_start_pfn ~ %lx max_low_pfn ~ %lx\n",
kva_start_pfn, max_low_pfn);
printk(KERN_INFO "max_pfn = %lx\n", max_pfn);
/* avoid clash with initrd */
memblock_x86_reserve_range(kva_start_pfn<<PAGE_SHIFT,
(kva_start_pfn + kva_pages)<<PAGE_SHIFT,
"KVA PG");
#ifdef CONFIG_HIGHMEM
highstart_pfn = highend_pfn = max_pfn;
if (max_pfn > max_low_pfn)
@ -409,51 +257,9 @@ void __init initmem_init(void)
printk(KERN_DEBUG "Low memory ends at vaddr %08lx\n",
(ulong) pfn_to_kaddr(max_low_pfn));
for_each_online_node(nid) {
init_remap_allocator(nid);
allocate_pgdat(nid);
}
remap_numa_kva();
printk(KERN_DEBUG "High memory starts at vaddr %08lx\n",
(ulong) pfn_to_kaddr(highstart_pfn));
for_each_online_node(nid)
propagate_e820_map_node(nid);
for_each_online_node(nid) {
memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
NODE_DATA(nid)->node_id = nid;
}
setup_bootmem_allocator();
}
#ifdef CONFIG_MEMORY_HOTPLUG
static int paddr_to_nid(u64 addr)
{
int nid;
unsigned long pfn = PFN_DOWN(addr);
for_each_node(nid)
if (node_start_pfn[nid] <= pfn &&
pfn < node_end_pfn[nid])
return nid;
return -1;
}
/*
* This function is used to ask node id BEFORE memmap and mem_section's
* initialization (pfn_to_nid() can't be used yet).
* If _PXM is not defined on ACPI's DSDT, node id must be found by this.
*/
int memory_add_physaddr_to_nid(u64 addr)
{
int nid = paddr_to_nid(addr);
return (nid >= 0) ? nid : 0;
}
EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
#endif

644
arch/x86/mm/numa_64.c
View File

@ -2,646 +2,13 @@
* Generic VM initialization for x86-64 NUMA setups.
* Copyright 2002,2003 Andi Kleen, SuSE Labs.
*/
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/memblock.h>
#include <linux/mmzone.h>
#include <linux/ctype.h>
#include <linux/module.h>
#include <linux/nodemask.h>
#include <linux/sched.h>
#include <linux/acpi.h>
#include <asm/e820.h>
#include <asm/proto.h>
#include <asm/dma.h>
#include <asm/acpi.h>
#include <asm/amd_nb.h>
#include "numa_internal.h"
struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
EXPORT_SYMBOL(node_data);
nodemask_t numa_nodes_parsed __initdata;
struct memnode memnode;
static unsigned long __initdata nodemap_addr;
static unsigned long __initdata nodemap_size;
static struct numa_meminfo numa_meminfo __initdata;
static int numa_distance_cnt;
static u8 *numa_distance;
/*
* Given a shift value, try to populate memnodemap[]
* Returns :
* 1 if OK
* 0 if memnodmap[] too small (of shift too small)
* -1 if node overlap or lost ram (shift too big)
*/
static int __init populate_memnodemap(const struct numa_meminfo *mi, int shift)
{
unsigned long addr, end;
int i, res = -1;
memset(memnodemap, 0xff, sizeof(s16)*memnodemapsize);
for (i = 0; i < mi->nr_blks; i++) {
addr = mi->blk[i].start;
end = mi->blk[i].end;
if (addr >= end)
continue;
if ((end >> shift) >= memnodemapsize)
return 0;
do {
if (memnodemap[addr >> shift] != NUMA_NO_NODE)
return -1;
memnodemap[addr >> shift] = mi->blk[i].nid;
addr += (1UL << shift);
} while (addr < end);
res = 1;
}
return res;
}
static int __init allocate_cachealigned_memnodemap(void)
{
unsigned long addr;
memnodemap = memnode.embedded_map;
if (memnodemapsize <= ARRAY_SIZE(memnode.embedded_map))
return 0;
addr = 0x8000;
nodemap_size = roundup(sizeof(s16) * memnodemapsize, L1_CACHE_BYTES);
nodemap_addr = memblock_find_in_range(addr, get_max_mapped(),
nodemap_size, L1_CACHE_BYTES);
if (nodemap_addr == MEMBLOCK_ERROR) {
printk(KERN_ERR
"NUMA: Unable to allocate Memory to Node hash map\n");
nodemap_addr = nodemap_size = 0;
return -1;
}
memnodemap = phys_to_virt(nodemap_addr);
memblock_x86_reserve_range(nodemap_addr, nodemap_addr + nodemap_size, "MEMNODEMAP");
printk(KERN_DEBUG "NUMA: Allocated memnodemap from %lx - %lx\n",
nodemap_addr, nodemap_addr + nodemap_size);
return 0;
}
/*
* The LSB of all start and end addresses in the node map is the value of the
* maximum possible shift.
*/
static int __init extract_lsb_from_nodes(const struct numa_meminfo *mi)
{
int i, nodes_used = 0;
unsigned long start, end;
unsigned long bitfield = 0, memtop = 0;
for (i = 0; i < mi->nr_blks; i++) {
start = mi->blk[i].start;
end = mi->blk[i].end;
if (start >= end)
continue;
bitfield |= start;
nodes_used++;
if (end > memtop)
memtop = end;
}
if (nodes_used <= 1)
i = 63;
else
i = find_first_bit(&bitfield, sizeof(unsigned long)*8);
memnodemapsize = (memtop >> i)+1;
return i;
}
static int __init compute_hash_shift(const struct numa_meminfo *mi)
{
int shift;
shift = extract_lsb_from_nodes(mi);
if (allocate_cachealigned_memnodemap())
return -1;
printk(KERN_DEBUG "NUMA: Using %d for the hash shift.\n",
shift);
if (populate_memnodemap(mi, shift) != 1) {
printk(KERN_INFO "Your memory is not aligned you need to "
"rebuild your kernel with a bigger NODEMAPSIZE "
"shift=%d\n", shift);
return -1;
}
return shift;
}
int __meminit __early_pfn_to_nid(unsigned long pfn)
{
return phys_to_nid(pfn << PAGE_SHIFT);
}
static void * __init early_node_mem(int nodeid, unsigned long start,
unsigned long end, unsigned long size,
unsigned long align)
{
unsigned long mem;
/*
* put it on high as possible
* something will go with NODE_DATA
*/
if (start < (MAX_DMA_PFN<<PAGE_SHIFT))
start = MAX_DMA_PFN<<PAGE_SHIFT;
if (start < (MAX_DMA32_PFN<<PAGE_SHIFT) &&
end > (MAX_DMA32_PFN<<PAGE_SHIFT))
start = MAX_DMA32_PFN<<PAGE_SHIFT;
mem = memblock_x86_find_in_range_node(nodeid, start, end, size, align);
if (mem != MEMBLOCK_ERROR)
return __va(mem);
/* extend the search scope */
end = max_pfn_mapped << PAGE_SHIFT;
start = MAX_DMA_PFN << PAGE_SHIFT;
mem = memblock_find_in_range(start, end, size, align);
if (mem != MEMBLOCK_ERROR)
return __va(mem);
printk(KERN_ERR "Cannot find %lu bytes in node %d\n",
size, nodeid);
return NULL;
}
static int __init numa_add_memblk_to(int nid, u64 start, u64 end,
struct numa_meminfo *mi)
{
/* ignore zero length blks */
if (start == end)
return 0;
/* whine about and ignore invalid blks */
if (start > end || nid < 0 || nid >= MAX_NUMNODES) {
pr_warning("NUMA: Warning: invalid memblk node %d (%Lx-%Lx)\n",
nid, start, end);
return 0;
}
if (mi->nr_blks >= NR_NODE_MEMBLKS) {
pr_err("NUMA: too many memblk ranges\n");
return -EINVAL;
}
mi->blk[mi->nr_blks].start = start;
mi->blk[mi->nr_blks].end = end;
mi->blk[mi->nr_blks].nid = nid;
mi->nr_blks++;
return 0;
}
/**
* numa_remove_memblk_from - Remove one numa_memblk from a numa_meminfo
* @idx: Index of memblk to remove
* @mi: numa_meminfo to remove memblk from
*
* Remove @idx'th numa_memblk from @mi by shifting @mi->blk[] and
* decrementing @mi->nr_blks.
*/
void __init numa_remove_memblk_from(int idx, struct numa_meminfo *mi)
{
mi->nr_blks--;
memmove(&mi->blk[idx], &mi->blk[idx + 1],
(mi->nr_blks - idx) * sizeof(mi->blk[0]));
}
/**
* numa_add_memblk - Add one numa_memblk to numa_meminfo
* @nid: NUMA node ID of the new memblk
* @start: Start address of the new memblk
* @end: End address of the new memblk
*
* Add a new memblk to the default numa_meminfo.
*
* RETURNS:
* 0 on success, -errno on failure.
*/
int __init numa_add_memblk(int nid, u64 start, u64 end)
{
return numa_add_memblk_to(nid, start, end, &numa_meminfo);
}
/* Initialize bootmem allocator for a node */
void __init
setup_node_bootmem(int nodeid, unsigned long start, unsigned long end)
{
unsigned long start_pfn, last_pfn, nodedata_phys;
const int pgdat_size = roundup(sizeof(pg_data_t), PAGE_SIZE);
int nid;
if (!end)
return;
/*
* Don't confuse VM with a node that doesn't have the
* minimum amount of memory:
*/
if (end && (end - start) < NODE_MIN_SIZE)
return;
start = roundup(start, ZONE_ALIGN);
printk(KERN_INFO "Initmem setup node %d %016lx-%016lx\n", nodeid,
start, end);
start_pfn = start >> PAGE_SHIFT;
last_pfn = end >> PAGE_SHIFT;
node_data[nodeid] = early_node_mem(nodeid, start, end, pgdat_size,
SMP_CACHE_BYTES);
if (node_data[nodeid] == NULL)
return;
nodedata_phys = __pa(node_data[nodeid]);
memblock_x86_reserve_range(nodedata_phys, nodedata_phys + pgdat_size, "NODE_DATA");
printk(KERN_INFO " NODE_DATA [%016lx - %016lx]\n", nodedata_phys,
nodedata_phys + pgdat_size - 1);
nid = phys_to_nid(nodedata_phys);
if (nid != nodeid)
printk(KERN_INFO " NODE_DATA(%d) on node %d\n", nodeid, nid);
memset(NODE_DATA(nodeid), 0, sizeof(pg_data_t));
NODE_DATA(nodeid)->node_id = nodeid;
NODE_DATA(nodeid)->node_start_pfn = start_pfn;
NODE_DATA(nodeid)->node_spanned_pages = last_pfn - start_pfn;
node_set_online(nodeid);
}
/**
* numa_cleanup_meminfo - Cleanup a numa_meminfo
* @mi: numa_meminfo to clean up
*
* Sanitize @mi by merging and removing unncessary memblks. Also check for
* conflicts and clear unused memblks.
*
* RETURNS:
* 0 on success, -errno on failure.
*/
int __init numa_cleanup_meminfo(struct numa_meminfo *mi)
{
const u64 low = 0;
const u64 high = (u64)max_pfn << PAGE_SHIFT;
int i, j, k;
for (i = 0; i < mi->nr_blks; i++) {
struct numa_memblk *bi = &mi->blk[i];
/* make sure all blocks are inside the limits */
bi->start = max(bi->start, low);
bi->end = min(bi->end, high);
/* and there's no empty block */
if (bi->start >= bi->end) {
numa_remove_memblk_from(i--, mi);
continue;
}
for (j = i + 1; j < mi->nr_blks; j++) {
struct numa_memblk *bj = &mi->blk[j];
unsigned long start, end;
/*
* See whether there are overlapping blocks. Whine
* about but allow overlaps of the same nid. They
* will be merged below.
*/
if (bi->end > bj->start && bi->start < bj->end) {
if (bi->nid != bj->nid) {
pr_err("NUMA: node %d (%Lx-%Lx) overlaps with node %d (%Lx-%Lx)\n",
bi->nid, bi->start, bi->end,
bj->nid, bj->start, bj->end);
return -EINVAL;
}
pr_warning("NUMA: Warning: node %d (%Lx-%Lx) overlaps with itself (%Lx-%Lx)\n",
bi->nid, bi->start, bi->end,
bj->start, bj->end);
}
/*
* Join together blocks on the same node, holes
* between which don't overlap with memory on other
* nodes.
*/
if (bi->nid != bj->nid)
continue;
start = max(min(bi->start, bj->start), low);
end = min(max(bi->end, bj->end), high);
for (k = 0; k < mi->nr_blks; k++) {
struct numa_memblk *bk = &mi->blk[k];
if (bi->nid == bk->nid)
continue;
if (start < bk->end && end > bk->start)
break;
}
if (k < mi->nr_blks)
continue;
printk(KERN_INFO "NUMA: Node %d [%Lx,%Lx) + [%Lx,%Lx) -> [%lx,%lx)\n",
bi->nid, bi->start, bi->end, bj->start, bj->end,
start, end);
bi->start = start;
bi->end = end;
numa_remove_memblk_from(j--, mi);
}
}
for (i = mi->nr_blks; i < ARRAY_SIZE(mi->blk); i++) {
mi->blk[i].start = mi->blk[i].end = 0;
mi->blk[i].nid = NUMA_NO_NODE;
}
return 0;
}
/*
* Set nodes, which have memory in @mi, in *@nodemask.
*/
static void __init numa_nodemask_from_meminfo(nodemask_t *nodemask,
const struct numa_meminfo *mi)
{
int i;
for (i = 0; i < ARRAY_SIZE(mi->blk); i++)
if (mi->blk[i].start != mi->blk[i].end &&
mi->blk[i].nid != NUMA_NO_NODE)
node_set(mi->blk[i].nid, *nodemask);
}
/**
* numa_reset_distance - Reset NUMA distance table
*
* The current table is freed. The next numa_set_distance() call will
* create a new one.
*/
void __init numa_reset_distance(void)
{
size_t size = numa_distance_cnt * numa_distance_cnt * sizeof(numa_distance[0]);
/* numa_distance could be 1LU marking allocation failure, test cnt */
if (numa_distance_cnt)
memblock_x86_free_range(__pa(numa_distance),
__pa(numa_distance) + size);
numa_distance_cnt = 0;
numa_distance = NULL; /* enable table creation */
}
static int __init numa_alloc_distance(void)
{
nodemask_t nodes_parsed;
size_t size;
int i, j, cnt = 0;
u64 phys;
/* size the new table and allocate it */
nodes_parsed = numa_nodes_parsed;
numa_nodemask_from_meminfo(&nodes_parsed, &numa_meminfo);
for_each_node_mask(i, nodes_parsed)
cnt = i;
cnt++;
size = cnt * cnt * sizeof(numa_distance[0]);
phys = memblock_find_in_range(0, (u64)max_pfn_mapped << PAGE_SHIFT,
size, PAGE_SIZE);
if (phys == MEMBLOCK_ERROR) {
pr_warning("NUMA: Warning: can't allocate distance table!\n");
/* don't retry until explicitly reset */
numa_distance = (void *)1LU;
return -ENOMEM;
}
memblock_x86_reserve_range(phys, phys + size, "NUMA DIST");
numa_distance = __va(phys);
numa_distance_cnt = cnt;
/* fill with the default distances */
for (i = 0; i < cnt; i++)
for (j = 0; j < cnt; j++)
numa_distance[i * cnt + j] = i == j ?
LOCAL_DISTANCE : REMOTE_DISTANCE;
printk(KERN_DEBUG "NUMA: Initialized distance table, cnt=%d\n", cnt);
return 0;
}
/**
* numa_set_distance - Set NUMA distance from one NUMA to another
* @from: the 'from' node to set distance
* @to: the 'to' node to set distance
* @distance: NUMA distance
*
* Set the distance from node @from to @to to @distance. If distance table
* doesn't exist, one which is large enough to accommodate all the currently
* known nodes will be created.
*
* If such table cannot be allocated, a warning is printed and further
* calls are ignored until the distance table is reset with
* numa_reset_distance().
*
* If @from or @to is higher than the highest known node at the time of
* table creation or @distance doesn't make sense, the call is ignored.
* This is to allow simplification of specific NUMA config implementations.
*/
void __init numa_set_distance(int from, int to, int distance)
{
if (!numa_distance && numa_alloc_distance() < 0)
return;
if (from >= numa_distance_cnt || to >= numa_distance_cnt) {
printk_once(KERN_DEBUG "NUMA: Debug: distance out of bound, from=%d to=%d distance=%d\n",
from, to, distance);
return;
}
if ((u8)distance != distance ||
(from == to && distance != LOCAL_DISTANCE)) {
pr_warn_once("NUMA: Warning: invalid distance parameter, from=%d to=%d distance=%d\n",
from, to, distance);
return;
}
numa_distance[from * numa_distance_cnt + to] = distance;
}
int __node_distance(int from, int to)
{
if (from >= numa_distance_cnt || to >= numa_distance_cnt)
return from == to ? LOCAL_DISTANCE : REMOTE_DISTANCE;
return numa_distance[from * numa_distance_cnt + to];
}
EXPORT_SYMBOL(__node_distance);
/*
* Sanity check to catch more bad NUMA configurations (they are amazingly
* common). Make sure the nodes cover all memory.
*/
static bool __init numa_meminfo_cover_memory(const struct numa_meminfo *mi)
{
unsigned long numaram, e820ram;
int i;
numaram = 0;
for (i = 0; i < mi->nr_blks; i++) {
unsigned long s = mi->blk[i].start >> PAGE_SHIFT;
unsigned long e = mi->blk[i].end >> PAGE_SHIFT;
numaram += e - s;
numaram -= __absent_pages_in_range(mi->blk[i].nid, s, e);
if ((long)numaram < 0)
numaram = 0;
}
e820ram = max_pfn - (memblock_x86_hole_size(0,
max_pfn << PAGE_SHIFT) >> PAGE_SHIFT);
/* We seem to lose 3 pages somewhere. Allow 1M of slack. */
if ((long)(e820ram - numaram) >= (1 << (20 - PAGE_SHIFT))) {
printk(KERN_ERR "NUMA: nodes only cover %luMB of your %luMB e820 RAM. Not used.\n",
(numaram << PAGE_SHIFT) >> 20,
(e820ram << PAGE_SHIFT) >> 20);
return false;
}
return true;
}
static int __init numa_register_memblks(struct numa_meminfo *mi)
{
int i, nid;
/* Account for nodes with cpus and no memory */
node_possible_map = numa_nodes_parsed;
numa_nodemask_from_meminfo(&node_possible_map, mi);
if (WARN_ON(nodes_empty(node_possible_map)))
return -EINVAL;
memnode_shift = compute_hash_shift(mi);
if (memnode_shift < 0) {
printk(KERN_ERR "NUMA: No NUMA node hash function found. Contact maintainer\n");
return -EINVAL;
}
for (i = 0; i < mi->nr_blks; i++)
memblock_x86_register_active_regions(mi->blk[i].nid,
mi->blk[i].start >> PAGE_SHIFT,
mi->blk[i].end >> PAGE_SHIFT);
/* for out of order entries */
sort_node_map();
if (!numa_meminfo_cover_memory(mi))
return -EINVAL;
/* Finally register nodes. */
for_each_node_mask(nid, node_possible_map) {
u64 start = (u64)max_pfn << PAGE_SHIFT;
u64 end = 0;
for (i = 0; i < mi->nr_blks; i++) {
if (nid != mi->blk[i].nid)
continue;
start = min(mi->blk[i].start, start);
end = max(mi->blk[i].end, end);
}
if (start < end)
setup_node_bootmem(nid, start, end);
}
return 0;
}
/**
* dummy_numma_init - Fallback dummy NUMA init
*
* Used if there's no underlying NUMA architecture, NUMA initialization
* fails, or NUMA is disabled on the command line.
*
* Must online at least one node and add memory blocks that cover all
* allowed memory. This function must not fail.
*/
static int __init dummy_numa_init(void)
{
printk(KERN_INFO "%s\n",
numa_off ? "NUMA turned off" : "No NUMA configuration found");
printk(KERN_INFO "Faking a node at %016lx-%016lx\n",
0LU, max_pfn << PAGE_SHIFT);
node_set(0, numa_nodes_parsed);
numa_add_memblk(0, 0, (u64)max_pfn << PAGE_SHIFT);
return 0;
}
static int __init numa_init(int (*init_func)(void))
{
int i;
int ret;
for (i = 0; i < MAX_LOCAL_APIC; i++)
set_apicid_to_node(i, NUMA_NO_NODE);
nodes_clear(numa_nodes_parsed);
nodes_clear(node_possible_map);
nodes_clear(node_online_map);
memset(&numa_meminfo, 0, sizeof(numa_meminfo));
remove_all_active_ranges();
numa_reset_distance();
ret = init_func();
if (ret < 0)
return ret;
ret = numa_cleanup_meminfo(&numa_meminfo);
if (ret < 0)
return ret;
numa_emulation(&numa_meminfo, numa_distance_cnt);
ret = numa_register_memblks(&numa_meminfo);
if (ret < 0)
return ret;
for (i = 0; i < nr_cpu_ids; i++) {
int nid = early_cpu_to_node(i);
if (nid == NUMA_NO_NODE)
continue;
if (!node_online(nid))
numa_clear_node(i);
}
numa_init_array();
return 0;
}
void __init initmem_init(void)
{
int ret;
if (!numa_off) {
#ifdef CONFIG_ACPI_NUMA
ret = numa_init(x86_acpi_numa_init);
if (!ret)
return;
#endif
#ifdef CONFIG_AMD_NUMA
ret = numa_init(amd_numa_init);
if (!ret)
return;
#endif
}
numa_init(dummy_numa_init);
x86_numa_init();
}
unsigned long __init numa_free_all_bootmem(void)
@ -656,12 +23,3 @@ unsigned long __init numa_free_all_bootmem(void)
return pages;
}
int __cpuinit numa_cpu_node(int cpu)
{
int apicid = early_per_cpu(x86_cpu_to_apicid, cpu);
if (apicid != BAD_APICID)
return __apicid_to_node[apicid];
return NUMA_NO_NODE;
}

16
arch/x86/mm/numa_emulation.c
View File

@ -5,6 +5,7 @@
#include <linux/errno.h>
#include <linux/topology.h>
#include <linux/memblock.h>
#include <linux/bootmem.h>
#include <asm/dma.h>
#include "numa_internal.h"
@ -84,7 +85,13 @@ static int __init split_nodes_interleave(struct numa_meminfo *ei,
nr_nodes = MAX_NUMNODES;
}
size = (max_addr - addr - memblock_x86_hole_size(addr, max_addr)) / nr_nodes;
/*
* Calculate target node size. x86_32 freaks on __udivdi3() so do
* the division in ulong number of pages and convert back.
*/
size = max_addr - addr - memblock_x86_hole_size(addr, max_addr);
size = PFN_PHYS((unsigned long)(size >> PAGE_SHIFT) / nr_nodes);
/*
* Calculate the number of big nodes that can be allocated as a result
* of consolidating the remainder.
@ -226,7 +233,7 @@ static int __init split_nodes_size_interleave(struct numa_meminfo *ei,
*/
while (nodes_weight(physnode_mask)) {
for_each_node_mask(i, physnode_mask) {
u64 dma32_end = MAX_DMA32_PFN << PAGE_SHIFT;
u64 dma32_end = PFN_PHYS(MAX_DMA32_PFN);
u64 start, limit, end;
int phys_blk;
@ -298,7 +305,7 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt)
{
static struct numa_meminfo ei __initdata;
static struct numa_meminfo pi __initdata;
const u64 max_addr = max_pfn << PAGE_SHIFT;
const u64 max_addr = PFN_PHYS(max_pfn);
u8 *phys_dist = NULL;
size_t phys_size = numa_dist_cnt * numa_dist_cnt * sizeof(phys_dist[0]);
int max_emu_nid, dfl_phys_nid;
@ -342,8 +349,7 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt)
if (numa_dist_cnt) {
u64 phys;
phys = memblock_find_in_range(0,
(u64)max_pfn_mapped << PAGE_SHIFT,
phys = memblock_find_in_range(0, PFN_PHYS(max_pfn_mapped),
phys_size, PAGE_SIZE);
if (phys == MEMBLOCK_ERROR) {
pr_warning("NUMA: Warning: can't allocate copy of distance table, disabling emulation\n");

8
arch/x86/mm/numa_internal.h
View File

@ -19,6 +19,14 @@ void __init numa_remove_memblk_from(int idx, struct numa_meminfo *mi);
int __init numa_cleanup_meminfo(struct numa_meminfo *mi);
void __init numa_reset_distance(void);
void __init x86_numa_init(void);
#ifdef CONFIG_X86_64
static inline void init_alloc_remap(int nid, u64 start, u64 end) { }
#else
void __init init_alloc_remap(int nid, u64 start, u64 end);
#endif
#ifdef CONFIG_NUMA_EMU
void __init numa_emulation(struct numa_meminfo *numa_meminfo,
int numa_dist_cnt);

82
arch/x86/mm/srat_64.c → arch/x86/mm/srat.c
View File

@ -26,8 +26,6 @@
int acpi_numa __initdata;
static struct bootnode nodes_add[MAX_NUMNODES];
static __init int setup_node(int pxm)
{
return acpi_map_pxm_to_node(pxm);
@ -37,7 +35,6 @@ static __init void bad_srat(void)
{
printk(KERN_ERR "SRAT: SRAT not used.\n");
acpi_numa = -1;
memset(nodes_add, 0, sizeof(nodes_add));
}
static __init inline int srat_disabled(void)
@ -131,73 +128,17 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
pxm, apic_id, node);
}
#ifdef CONFIG_MEMORY_HOTPLUG_SPARSE
#ifdef CONFIG_MEMORY_HOTPLUG
static inline int save_add_info(void) {return 1;}
#else
static inline int save_add_info(void) {return 0;}
#endif
/*
* Update nodes_add[]
* This code supports one contiguous hot add area per node
*/
static void __init
update_nodes_add(int node, unsigned long start, unsigned long end)
{
unsigned long s_pfn = start >> PAGE_SHIFT;
unsigned long e_pfn = end >> PAGE_SHIFT;
int changed = 0;
struct bootnode *nd = &nodes_add[node];
/* I had some trouble with strange memory hotadd regions breaking
the boot. Be very strict here and reject anything unexpected.
If you want working memory hotadd write correct SRATs.
The node size check is a basic sanity check to guard against
mistakes */
if ((signed long)(end - start) < NODE_MIN_SIZE) {
printk(KERN_ERR "SRAT: Hotplug area too small\n");
return;
}
/* This check might be a bit too strict, but I'm keeping it for now. */
if (absent_pages_in_range(s_pfn, e_pfn) != e_pfn - s_pfn) {
printk(KERN_ERR
"SRAT: Hotplug area %lu -> %lu has existing memory\n",
s_pfn, e_pfn);
return;
}
/* Looks good */
if (nd->start == nd->end) {
nd->start = start;
nd->end = end;
changed = 1;
} else {
if (nd->start == end) {
nd->start = start;
changed = 1;
}
if (nd->end == start) {
nd->end = end;
changed = 1;
}
if (!changed)
printk(KERN_ERR "SRAT: Hotplug zone not continuous. Partly ignored\n");
}
if (changed) {
node_set(node, numa_nodes_parsed);
printk(KERN_INFO "SRAT: hot plug zone found %Lx - %Lx\n",
nd->start, nd->end);
}
}
/* Callback for parsing of the Proximity Domain <-> Memory Area mappings */
void __init
acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
{
unsigned long start, end;
u64 start, end;
int node, pxm;
if (srat_disabled())
@ -226,11 +167,8 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
return;
}
printk(KERN_INFO "SRAT: Node %u PXM %u %lx-%lx\n", node, pxm,
printk(KERN_INFO "SRAT: Node %u PXM %u %Lx-%Lx\n", node, pxm,
start, end);
if (ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE)
update_nodes_add(node, start, end);
}
void __init acpi_numa_arch_fixup(void) {}
@ -244,17 +182,3 @@ int __init x86_acpi_numa_init(void)
return ret;
return srat_disabled() ? -EINVAL : 0;
}
#if defined(CONFIG_MEMORY_HOTPLUG_SPARSE) || defined(CONFIG_ACPI_HOTPLUG_MEMORY)
int memory_add_physaddr_to_nid(u64 start)
{
int i, ret = 0;
for_each_node(i)
if (nodes_add[i].start <= start && nodes_add[i].end > start)
ret = i;
return ret;
}
EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
#endif

288
arch/x86/mm/srat_32.c
View File

@ -1,288 +0,0 @@
/*
* Some of the code in this file has been gleaned from the 64 bit
* discontigmem support code base.
*
* Copyright (C) 2002, IBM Corp.
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to Pat Gaughen <gone@us.ibm.com>
*/
#include <linux/mm.h>
#include <linux/bootmem.h>
#include <linux/memblock.h>
#include <linux/mmzone.h>
#include <linux/acpi.h>
#include <linux/nodemask.h>
#include <asm/srat.h>
#include <asm/topology.h>
#include <asm/smp.h>
#include <asm/e820.h>
/*
* proximity macros and definitions
*/
#define NODE_ARRAY_INDEX(x) ((x) / 8) /* 8 bits/char */
#define NODE_ARRAY_OFFSET(x) ((x) % 8) /* 8 bits/char */
#define BMAP_SET(bmap, bit) ((bmap)[NODE_ARRAY_INDEX(bit)] |= 1 << NODE_ARRAY_OFFSET(bit))
#define BMAP_TEST(bmap, bit) ((bmap)[NODE_ARRAY_INDEX(bit)] & (1 << NODE_ARRAY_OFFSET(bit)))
/* bitmap length; _PXM is at most 255 */
#define PXM_BITMAP_LEN (MAX_PXM_DOMAINS / 8)
static u8 __initdata pxm_bitmap[PXM_BITMAP_LEN]; /* bitmap of proximity domains */
#define MAX_CHUNKS_PER_NODE 3
#define MAXCHUNKS (MAX_CHUNKS_PER_NODE * MAX_NUMNODES)
struct node_memory_chunk_s {
unsigned long start_pfn;
unsigned long end_pfn;
u8 pxm; // proximity domain of node
u8 nid; // which cnode contains this chunk?
u8 bank; // which mem bank on this node
};
static struct node_memory_chunk_s __initdata node_memory_chunk[MAXCHUNKS];
static int __initdata num_memory_chunks; /* total number of memory chunks */
static u8 __initdata apicid_to_pxm[MAX_LOCAL_APIC];
int acpi_numa __initdata;
static __init void bad_srat(void)
{
printk(KERN_ERR "SRAT: SRAT not used.\n");
acpi_numa = -1;
num_memory_chunks = 0;
}
static __init inline int srat_disabled(void)
{
return numa_off || acpi_numa < 0;
}
/* Identify CPU proximity domains */
void __init
acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *cpu_affinity)
{
if (srat_disabled())
return;
if (cpu_affinity->header.length !=
sizeof(struct acpi_srat_cpu_affinity)) {
bad_srat();
return;
}
if ((cpu_affinity->flags & ACPI_SRAT_CPU_ENABLED) == 0)
return; /* empty entry */
/* mark this node as "seen" in node bitmap */
BMAP_SET(pxm_bitmap, cpu_affinity->proximity_domain_lo);
/* don't need to check apic_id here, because it is always 8 bits */
apicid_to_pxm[cpu_affinity->apic_id] = cpu_affinity->proximity_domain_lo;
printk(KERN_DEBUG "CPU %02x in proximity domain %02x\n",
cpu_affinity->apic_id, cpu_affinity->proximity_domain_lo);
}
/*
* Identify memory proximity domains and hot-remove capabilities.
* Fill node memory chunk list structure.
*/
void __init
acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *memory_affinity)
{
unsigned long long paddr, size;
unsigned long start_pfn, end_pfn;
u8 pxm;
struct node_memory_chunk_s *p, *q, *pend;
if (srat_disabled())
return;
if (memory_affinity->header.length !=
sizeof(struct acpi_srat_mem_affinity)) {
bad_srat();
return;
}
if ((memory_affinity->flags & ACPI_SRAT_MEM_ENABLED) == 0)
return; /* empty entry */
pxm = memory_affinity->proximity_domain & 0xff;
/* mark this node as "seen" in node bitmap */
BMAP_SET(pxm_bitmap, pxm);
/* calculate info for memory chunk structure */
paddr = memory_affinity->base_address;
size = memory_affinity->length;
start_pfn = paddr >> PAGE_SHIFT;
end_pfn = (paddr + size) >> PAGE_SHIFT;
if (num_memory_chunks >= MAXCHUNKS) {
printk(KERN_WARNING "Too many mem chunks in SRAT."
" Ignoring %lld MBytes at %llx\n",
size/(1024*1024), paddr);
return;
}
/* Insertion sort based on base address */
pend = &node_memory_chunk[num_memory_chunks];
for (p = &node_memory_chunk[0]; p < pend; p++) {
if (start_pfn < p->start_pfn)
break;
}
if (p < pend) {
for (q = pend; q >= p; q--)
*(q + 1) = *q;
}
p->start_pfn = start_pfn;
p->end_pfn = end_pfn;
p->pxm = pxm;
num_memory_chunks++;
printk(KERN_DEBUG "Memory range %08lx to %08lx"
" in proximity domain %02x %s\n",
start_pfn, end_pfn,
pxm,
((memory_affinity->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) ?
"enabled and removable" : "enabled" ) );
}
/* Callback for SLIT parsing */
void __init acpi_numa_slit_init(struct acpi_table_slit *slit)
{
}
void acpi_numa_arch_fixup(void)
{
}
/*
* The SRAT table always lists ascending addresses, so can always
* assume that the first "start" address that you see is the real
* start of the node, and that the current "end" address is after
* the previous one.
*/
static __init int node_read_chunk(int nid, struct node_memory_chunk_s *memory_chunk)
{
/*
* Only add present memory as told by the e820.
* There is no guarantee from the SRAT that the memory it
* enumerates is present at boot time because it represents
* *possible* memory hotplug areas the same as normal RAM.
*/
if (memory_chunk->start_pfn >= max_pfn) {
printk(KERN_INFO "Ignoring SRAT pfns: %08lx - %08lx\n",
memory_chunk->start_pfn, memory_chunk->end_pfn);
return -1;
}
if (memory_chunk->nid != nid)
return -1;
if (!node_has_online_mem(nid))
node_start_pfn[nid] = memory_chunk->start_pfn;
if (node_start_pfn[nid] > memory_chunk->start_pfn)
node_start_pfn[nid] = memory_chunk->start_pfn;
if (node_end_pfn[nid] < memory_chunk->end_pfn)
node_end_pfn[nid] = memory_chunk->end_pfn;
return 0;
}
int __init get_memcfg_from_srat(void)
{
int i, j, nid;
if (srat_disabled())
goto out_fail;
if (acpi_numa_init() < 0)
goto out_fail;
if (num_memory_chunks == 0) {
printk(KERN_DEBUG
"could not find any ACPI SRAT memory areas.\n");
goto out_fail;
}
/* Calculate total number of nodes in system from PXM bitmap and create
* a set of sequential node IDs starting at zero. (ACPI doesn't seem
* to specify the range of _PXM values.)
*/
/*
* MCD - we no longer HAVE to number nodes sequentially. PXM domain
* numbers could go as high as 256, and MAX_NUMNODES for i386 is typically
* 32, so we will continue numbering them in this manner until MAX_NUMNODES
* approaches MAX_PXM_DOMAINS for i386.
*/
nodes_clear(node_online_map);
for (i = 0; i < MAX_PXM_DOMAINS; i++) {
if (BMAP_TEST(pxm_bitmap, i)) {
int nid = acpi_map_pxm_to_node(i);
node_set_online(nid);
}
}
BUG_ON(num_online_nodes() == 0);
/* set cnode id in memory chunk structure */
for (i = 0; i < num_memory_chunks; i++)
node_memory_chunk[i].nid = pxm_to_node(node_memory_chunk[i].pxm);
printk(KERN_DEBUG "pxm bitmap: ");
for (i = 0; i < sizeof(pxm_bitmap); i++) {
printk(KERN_CONT "%02x ", pxm_bitmap[i]);
}
printk(KERN_CONT "\n");
printk(KERN_DEBUG "Number of logical nodes in system = %d\n",
num_online_nodes());
printk(KERN_DEBUG "Number of memory chunks in system = %d\n",
num_memory_chunks);
for (i = 0; i < MAX_LOCAL_APIC; i++)
set_apicid_to_node(i, pxm_to_node(apicid_to_pxm[i]));
for (j = 0; j < num_memory_chunks; j++){
struct node_memory_chunk_s * chunk = &node_memory_chunk[j];
printk(KERN_DEBUG
"chunk %d nid %d start_pfn %08lx end_pfn %08lx\n",
j, chunk->nid, chunk->start_pfn, chunk->end_pfn);
if (node_read_chunk(chunk->nid, chunk))
continue;
memblock_x86_register_active_regions(chunk->nid, chunk->start_pfn,
min(chunk->end_pfn, max_pfn));
}
/* for out of order entries in SRAT */
sort_node_map();
for_each_online_node(nid) {
unsigned long start = node_start_pfn[nid];
unsigned long end = min(node_end_pfn[nid], max_pfn);
memory_present(nid, start, end);
node_remap_size[nid] = node_memmap_size_bytes(nid, start, end);
}
return 1;
out_fail:
printk(KERN_DEBUG "failed to get NUMA memory information from SRAT"
" table\n");
return 0;
}

32
drivers/acpi/processor_throttling.c
View File

@ -710,20 +710,14 @@ static int acpi_processor_get_throttling_fadt(struct acpi_processor *pr)
}
#ifdef CONFIG_X86
static int acpi_throttling_rdmsr(struct acpi_processor *pr,
u64 *value)
static int acpi_throttling_rdmsr(u64 *value)
{
struct cpuinfo_x86 *c;
u64 msr_high, msr_low;
unsigned int cpu;
u64 msr = 0;
int ret = -1;
cpu = pr->id;
c = &cpu_data(cpu);
if ((c->x86_vendor != X86_VENDOR_INTEL) ||
!cpu_has(c, X86_FEATURE_ACPI)) {
if ((this_cpu_read(cpu_info.x86_vendor) != X86_VENDOR_INTEL) ||
!this_cpu_has(X86_FEATURE_ACPI)) {
printk(KERN_ERR PREFIX
"HARDWARE addr space,NOT supported yet\n");
} else {
@ -738,18 +732,13 @@ static int acpi_throttling_rdmsr(struct acpi_processor *pr,
return ret;
}
static int acpi_throttling_wrmsr(struct acpi_processor *pr, u64 value)
static int acpi_throttling_wrmsr(u64 value)
{
struct cpuinfo_x86 *c;
unsigned int cpu;
int ret = -1;
u64 msr;
cpu = pr->id;
c = &cpu_data(cpu);
if ((c->x86_vendor != X86_VENDOR_INTEL) ||
!cpu_has(c, X86_FEATURE_ACPI)) {
if ((this_cpu_read(cpu_info.x86_vendor) != X86_VENDOR_INTEL) ||
!this_cpu_has(X86_FEATURE_ACPI)) {
printk(KERN_ERR PREFIX
"HARDWARE addr space,NOT supported yet\n");
} else {
@ -761,15 +750,14 @@ static int acpi_throttling_wrmsr(struct acpi_processor *pr, u64 value)
return ret;
}
#else
static int acpi_throttling_rdmsr(struct acpi_processor *pr,
u64 *value)
static int acpi_throttling_rdmsr(u64 *value)
{
printk(KERN_ERR PREFIX
"HARDWARE addr space,NOT supported yet\n");
return -1;
}
static int acpi_throttling_wrmsr(struct acpi_processor *pr, u64 value)
static int acpi_throttling_wrmsr(u64 value)
{
printk(KERN_ERR PREFIX
"HARDWARE addr space,NOT supported yet\n");
@ -801,7 +789,7 @@ static int acpi_read_throttling_status(struct acpi_processor *pr,
ret = 0;
break;
case ACPI_ADR_SPACE_FIXED_HARDWARE:
ret = acpi_throttling_rdmsr(pr, value);
ret = acpi_throttling_rdmsr(value);
break;
default:
printk(KERN_ERR PREFIX "Unknown addr space %d\n",
@ -834,7 +822,7 @@ static int acpi_write_throttling_state(struct acpi_processor *pr,
ret = 0;
break;
case ACPI_ADR_SPACE_FIXED_HARDWARE:
ret = acpi_throttling_wrmsr(pr, value);
ret = acpi_throttling_wrmsr(value);
break;
default:
printk(KERN_ERR PREFIX "Unknown addr space %d\n",