forked from Minki/linux
regulator: rk808: Add regulator driver for RK818
Add support for the rk818 regulator. The regulator module consists of 4 DCDCs, 9 LDOs, 1 switch and 1 BOOST converter which is used to power OTG and HDMI5V. The output voltages are configurable and are meant to supply power to the main processor and other components. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
This commit is contained in:
Wadim Egorov
Lee Jones
parent
2eedcbfc06
commit
1137529353
@ -635,11 +635,11 @@ config REGULATOR_RC5T583
|
||||
outputs which can be controlled by i2c communication.
|
||||
|
||||
config REGULATOR_RK808
|
||||
tristate "Rockchip RK808 Power regulators"
|
||||
tristate "Rockchip RK808/RK818 Power regulators"
|
||||
depends on MFD_RK808
|
||||
help
|
||||
Select this option to enable the power regulator of ROCKCHIP
|
||||
PMIC RK808.
|
||||
PMIC RK808 and RK818.
|
||||
This driver supports the control of different power rails of device
|
||||
through regulator interface. The device supports multiple DCDC/LDO
|
||||
outputs which can be controlled by i2c communication.
|
||||
|
||||
@ -1,11 +1,15 @@
|
||||
/*
|
||||
* Regulator driver for Rockchip RK808
|
||||
* Regulator driver for Rockchip RK808/RK818
|
||||
*
|
||||
* Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
|
||||
*
|
||||
* Author: Chris Zhong <zyw@rock-chips.com>
|
||||
* Author: Zhang Qing <zhangqing@rock-chips.com>
|
||||
*
|
||||
* Copyright (C) 2016 PHYTEC Messtechnik GmbH
|
||||
*
|
||||
* Author: Wadim Egorov <w.egorov@phytec.de>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms and conditions of the GNU General Public License,
|
||||
* version 2, as published by the Free Software Foundation.
|
||||
@ -32,6 +36,12 @@
|
||||
#define RK808_BUCK4_VSEL_MASK 0xf
|
||||
#define RK808_LDO_VSEL_MASK 0x1f
|
||||
|
||||
#define RK818_BUCK_VSEL_MASK 0x3f
|
||||
#define RK818_BUCK4_VSEL_MASK 0x1f
|
||||
#define RK818_LDO_VSEL_MASK 0x1f
|
||||
#define RK818_LDO3_ON_VSEL_MASK 0xf
|
||||
#define RK818_BOOST_ON_VSEL_MASK 0xe0
|
||||
|
||||
/* Ramp rate definitions for buck1 / buck2 only */
|
||||
#define RK808_RAMP_RATE_OFFSET 3
|
||||
#define RK808_RAMP_RATE_MASK (3 << RK808_RAMP_RATE_OFFSET)
|
||||
@ -454,6 +464,108 @@ static const struct regulator_desc rk808_reg[] = {
|
||||
RK808_DCDC_EN_REG, BIT(6)),
|
||||
};
|
||||
|
||||
static const struct regulator_desc rk818_reg[] = {
|
||||
{
|
||||
.name = "DCDC_REG1",
|
||||
.supply_name = "vcc1",
|
||||
.of_match = of_match_ptr("DCDC_REG1"),
|
||||
.regulators_node = of_match_ptr("regulators"),
|
||||
.id = RK818_ID_DCDC1,
|
||||
.ops = &rk808_reg_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.min_uV = 712500,
|
||||
.uV_step = 12500,
|
||||
.n_voltages = 64,
|
||||
.vsel_reg = RK818_BUCK1_ON_VSEL_REG,
|
||||
.vsel_mask = RK818_BUCK_VSEL_MASK,
|
||||
.enable_reg = RK818_DCDC_EN_REG,
|
||||
.enable_mask = BIT(0),
|
||||
.owner = THIS_MODULE,
|
||||
}, {
|
||||
.name = "DCDC_REG2",
|
||||
.supply_name = "vcc2",
|
||||
.of_match = of_match_ptr("DCDC_REG2"),
|
||||
.regulators_node = of_match_ptr("regulators"),
|
||||
.id = RK818_ID_DCDC2,
|
||||
.ops = &rk808_reg_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.min_uV = 712500,
|
||||
.uV_step = 12500,
|
||||
.n_voltages = 64,
|
||||
.vsel_reg = RK818_BUCK2_ON_VSEL_REG,
|
||||
.vsel_mask = RK818_BUCK_VSEL_MASK,
|
||||
.enable_reg = RK818_DCDC_EN_REG,
|
||||
.enable_mask = BIT(1),
|
||||
.owner = THIS_MODULE,
|
||||
}, {
|
||||
.name = "DCDC_REG3",
|
||||
.supply_name = "vcc3",
|
||||
.of_match = of_match_ptr("DCDC_REG3"),
|
||||
.regulators_node = of_match_ptr("regulators"),
|
||||
.id = RK818_ID_DCDC3,
|
||||
.ops = &rk808_switch_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.n_voltages = 1,
|
||||
.enable_reg = RK818_DCDC_EN_REG,
|
||||
.enable_mask = BIT(2),
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
RK8XX_DESC(RK818_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3600, 100,
|
||||
RK818_BUCK4_ON_VSEL_REG, RK818_BUCK4_VSEL_MASK,
|
||||
RK818_DCDC_EN_REG, BIT(3), 0),
|
||||
RK8XX_DESC(RK818_ID_BOOST, "DCDC_BOOST", "boost", 4700, 5400, 100,
|
||||
RK818_BOOST_LDO9_ON_VSEL_REG, RK818_BOOST_ON_VSEL_MASK,
|
||||
RK818_DCDC_EN_REG, BIT(4), 0),
|
||||
RK8XX_DESC(RK818_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100,
|
||||
RK818_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
|
||||
BIT(0), 400),
|
||||
RK8XX_DESC(RK818_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100,
|
||||
RK818_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
|
||||
BIT(1), 400),
|
||||
{
|
||||
.name = "LDO_REG3",
|
||||
.supply_name = "vcc7",
|
||||
.of_match = of_match_ptr("LDO_REG3"),
|
||||
.regulators_node = of_match_ptr("regulators"),
|
||||
.id = RK818_ID_LDO3,
|
||||
.ops = &rk808_reg_ops_ranges,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.n_voltages = 16,
|
||||
.linear_ranges = rk808_ldo3_voltage_ranges,
|
||||
.n_linear_ranges = ARRAY_SIZE(rk808_ldo3_voltage_ranges),
|
||||
.vsel_reg = RK818_LDO3_ON_VSEL_REG,
|
||||
.vsel_mask = RK818_LDO3_ON_VSEL_MASK,
|
||||
.enable_reg = RK818_LDO_EN_REG,
|
||||
.enable_mask = BIT(2),
|
||||
.enable_time = 400,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
RK8XX_DESC(RK818_ID_LDO4, "LDO_REG4", "vcc8", 1800, 3400, 100,
|
||||
RK818_LDO4_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
|
||||
BIT(3), 400),
|
||||
RK8XX_DESC(RK818_ID_LDO5, "LDO_REG5", "vcc7", 1800, 3400, 100,
|
||||
RK818_LDO5_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
|
||||
BIT(4), 400),
|
||||
RK8XX_DESC(RK818_ID_LDO6, "LDO_REG6", "vcc8", 800, 2500, 100,
|
||||
RK818_LDO6_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
|
||||
BIT(5), 400),
|
||||
RK8XX_DESC(RK818_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100,
|
||||
RK818_LDO7_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
|
||||
BIT(6), 400),
|
||||
RK8XX_DESC(RK818_ID_LDO8, "LDO_REG8", "vcc8", 1800, 3400, 100,
|
||||
RK818_LDO8_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
|
||||
BIT(7), 400),
|
||||
RK8XX_DESC(RK818_ID_LDO9, "LDO_REG9", "vcc9", 1800, 3400, 100,
|
||||
RK818_BOOST_LDO9_ON_VSEL_REG, RK818_LDO_VSEL_MASK,
|
||||
RK818_DCDC_EN_REG, BIT(5), 400),
|
||||
RK8XX_DESC_SWITCH(RK818_ID_SWITCH, "SWITCH_REG", "vcc9",
|
||||
RK818_DCDC_EN_REG, BIT(6)),
|
||||
RK8XX_DESC_SWITCH(RK818_ID_HDMI_SWITCH, "HDMI_SWITCH", "h_5v",
|
||||
RK818_H5V_EN_REG, BIT(0)),
|
||||
RK8XX_DESC_SWITCH(RK818_ID_OTG_SWITCH, "OTG_SWITCH", "usb",
|
||||
RK818_DCDC_EN_REG, BIT(7)),
|
||||
};
|
||||
|
||||
static int rk808_regulator_dt_parse_pdata(struct device *dev,
|
||||
struct device *client_dev,
|
||||
struct regmap *map,
|
||||
@ -499,7 +611,8 @@ static int rk808_regulator_probe(struct platform_device *pdev)
|
||||
struct regulator_config config = {};
|
||||
struct regulator_dev *rk808_rdev;
|
||||
struct rk808_regulator_data *pdata;
|
||||
int ret, i;
|
||||
const struct regulator_desc *regulators;
|
||||
int ret, i, nregulators;
|
||||
|
||||
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
|
||||
if (!pdata)
|
||||
@ -512,14 +625,29 @@ static int rk808_regulator_probe(struct platform_device *pdev)
|
||||
|
||||
platform_set_drvdata(pdev, pdata);
|
||||
|
||||
switch (rk808->variant) {
|
||||
case RK808_ID:
|
||||
regulators = rk808_reg;
|
||||
nregulators = RK808_NUM_REGULATORS;
|
||||
break;
|
||||
case RK818_ID:
|
||||
regulators = rk818_reg;
|
||||
nregulators = RK818_NUM_REGULATORS;
|
||||
break;
|
||||
default:
|
||||
dev_err(&client->dev, "unsupported RK8XX ID %lu\n",
|
||||
rk808->variant);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
config.dev = &client->dev;
|
||||
config.driver_data = pdata;
|
||||
config.regmap = rk808->regmap;
|
||||
|
||||
/* Instantiate the regulators */
|
||||
for (i = 0; i < RK808_NUM_REGULATORS; i++) {
|
||||
for (i = 0; i < nregulators; i++) {
|
||||
rk808_rdev = devm_regulator_register(&pdev->dev,
|
||||
&rk808_reg[i], &config);
|
||||
®ulators[i], &config);
|
||||
if (IS_ERR(rk808_rdev)) {
|
||||
dev_err(&client->dev,
|
||||
"failed to register %d regulator\n", i);
|
||||
@ -540,8 +668,9 @@ static struct platform_driver rk808_regulator_driver = {
|
||||
|
||||
module_platform_driver(rk808_regulator_driver);
|
||||
|
||||
MODULE_DESCRIPTION("regulator driver for the rk808 series PMICs");
|
||||
MODULE_AUTHOR("Chris Zhong<zyw@rock-chips.com>");
|
||||
MODULE_AUTHOR("Zhang Qing<zhangqing@rock-chips.com>");
|
||||
MODULE_DESCRIPTION("regulator driver for the RK808/RK818 series PMICs");
|
||||
MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
|
||||
MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>");
|
||||
MODULE_AUTHOR("Wadim Egorov <w.egorov@phytec.de>");
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_ALIAS("platform:rk808-regulator");
|
||||
|
||||
Loading…
Reference in New Issue
Block a user