leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

[TG3]: add 5780 basic jumbo frame support

Browse Source 
Add basic jumbo frames support for 5780. This chip supports jumbo frames
on the standard receive ring without the jumbo ring. The
TG3_FLAG_JUMBO_ENABLE is changed to TG3_FLAG_JUMBO_RING_ENABLE to
indicate using the jumbo ring on 5704 and older chips. A new
TG3_FLG2_JUMBO_CAPABLE flag is added to indicate jumbo frames support
with or without the jumbo ring.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Michael Chan 2005-07-25 12:30:38 -07:00 committed by David S. Miller
parent 4cf78e4fb6
commit 0f893dc6ec
2 changed files with 20 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

30
drivers/net/tg3.c
View File

@ -90,7 +90,7 @@
/* hardware minimum and maximum for a single frame's data payload */
#define TG3_MIN_MTU 60
#define TG3_MAX_MTU(tp) \
(!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ? 9000 : 1500)
((tp->tg3_flags2 & TG3_FLG2_JUMBO_CAPABLE) ? 9000 : 1500)
/* These numbers seem to be hard coded in the NIC firmware somehow.
* You can't change the ring sizes, but you can change where you place
@ -914,7 +914,7 @@ out:
if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401) {
/* Cannot do read-modify-write on 5401 */
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x4c20);
} else if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
} else if (tp->tg3_flags2 & TG3_FLG2_JUMBO_CAPABLE) {
u32 phy_reg;
/* Set bit 14 with read-modify-write to preserve other bits */
@ -926,7 +926,7 @@ out:
/* Set phy register 0x10 bit 0 to high fifo elasticity to support
* jumbo frames transmission.
*/
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
if (tp->tg3_flags2 & TG3_FLG2_JUMBO_CAPABLE) {
u32 phy_reg;
if (!tg3_readphy(tp, MII_TG3_EXT_CTRL, &phy_reg))
@ -3444,9 +3444,9 @@ static inline void tg3_set_mtu(struct net_device *dev, struct tg3 *tp,
dev->mtu = new_mtu;
if (new_mtu > ETH_DATA_LEN)
tp->tg3_flags |= TG3_FLAG_JUMBO_ENABLE;
tp->tg3_flags |= TG3_FLAG_JUMBO_RING_ENABLE;
else
tp->tg3_flags &= ~TG3_FLAG_JUMBO_ENABLE;
tp->tg3_flags &= ~TG3_FLAG_JUMBO_RING_ENABLE;
}
static int tg3_change_mtu(struct net_device *dev, int new_mtu)
@ -3588,7 +3588,7 @@ static void tg3_init_rings(struct tg3 *tp)
(i << RXD_OPAQUE_INDEX_SHIFT));
}
if (tp->tg3_flags & TG3_FLAG_JUMBO_ENABLE) {
if (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE) {
for (i = 0; i < TG3_RX_JUMBO_RING_SIZE; i++) {
struct tg3_rx_buffer_desc *rxd;
@ -3609,7 +3609,7 @@ static void tg3_init_rings(struct tg3 *tp)
break;
}
if (tp->tg3_flags & TG3_FLAG_JUMBO_ENABLE) {
if (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE) {
for (i = 0; i < tp->rx_jumbo_pending; i++) {
if (tg3_alloc_rx_skb(tp, RXD_OPAQUE_RING_JUMBO,
-1, i) < 0)
@ -5277,7 +5277,7 @@ static int tg3_reset_hw(struct tg3 *tp)
}
#endif
if (!(tp->tg3_flags & TG3_FLAG_JUMBO_ENABLE)) {
if (tp->dev->mtu <= ETH_DATA_LEN) {
tw32(BUFMGR_MB_RDMA_LOW_WATER,
tp->bufmgr_config.mbuf_read_dma_low_water);
tw32(BUFMGR_MB_MACRX_LOW_WATER,
@ -5352,7 +5352,7 @@ static int tg3_reset_hw(struct tg3 *tp)
/* Setup replenish threshold. */
tw32(RCVBDI_JUMBO_THRESH, tp->rx_jumbo_pending / 8);
if (tp->tg3_flags & TG3_FLAG_JUMBO_ENABLE) {
if (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE) {
tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_HIGH,
((u64) tp->rx_jumbo_mapping >> 32));
tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_LOW,
@ -5413,7 +5413,7 @@ static int tg3_reset_hw(struct tg3 *tp)
tw32_rx_mbox(MAILBOX_RCV_STD_PROD_IDX + TG3_64BIT_REG_LOW,
tp->rx_std_ptr);
tp->rx_jumbo_ptr = (tp->tg3_flags & TG3_FLAG_JUMBO_ENABLE) ?
tp->rx_jumbo_ptr = (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE) ?
tp->rx_jumbo_pending : 0;
tw32_rx_mbox(MAILBOX_RCV_JUMBO_PROD_IDX + TG3_64BIT_REG_LOW,
tp->rx_jumbo_ptr);
@ -8991,6 +8991,11 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS)
tp->tg3_flags2 |= TG3_FLG2_HW_TSO;
if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705 &&
GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5750 &&
GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5752)
tp->tg3_flags2 |= TG3_FLG2_JUMBO_CAPABLE;
if (pci_find_capability(tp->pdev, PCI_CAP_ID_EXP) != 0)
tp->tg3_flags2 |= TG3_FLG2_PCI_EXPRESS;
@ -9117,8 +9122,9 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
/* Derive initial jumbo mode from MTU assigned in
* ether_setup() via the alloc_etherdev() call
*/
if (tp->dev->mtu > ETH_DATA_LEN)
tp->tg3_flags |= TG3_FLAG_JUMBO_ENABLE;
if (tp->dev->mtu > ETH_DATA_LEN &&
GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5780)
tp->tg3_flags |= TG3_FLAG_JUMBO_RING_ENABLE;
/* Determine WakeOnLan speed to use. */
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||

3
drivers/net/tg3.h
View File

@ -2125,7 +2125,7 @@ struct tg3 {
#define TG3_FLAG_NO_TX_PSEUDO_CSUM 0x00100000
#define TG3_FLAG_NO_RX_PSEUDO_CSUM 0x00200000
#define TG3_FLAG_SERDES_WOL_CAP 0x00400000
#define TG3_FLAG_JUMBO_ENABLE 0x00800000
#define TG3_FLAG_JUMBO_RING_ENABLE 0x00800000
#define TG3_FLAG_10_100_ONLY 0x01000000
#define TG3_FLAG_PAUSE_AUTONEG 0x02000000
#define TG3_FLAG_BROKEN_CHECKSUMS 0x10000000
@ -2155,6 +2155,7 @@ struct tg3 {
#define TG3_FLG2_5750_PLUS 0x00080000
#define TG3_FLG2_PROTECTED_NVRAM 0x00100000
#define TG3_FLG2_USING_MSI 0x00200000
#define TG3_FLG2_JUMBO_CAPABLE 0x00400000
u32 split_mode_max_reqs;
#define SPLIT_MODE_5704_MAX_REQ 3