atm: [nicstar] reformatted with Lindent

Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
chas williams - CONTRACTOR 2010-05-29 09:03:44 +00:00 committed by David S. Miller
parent 741a00be1f
commit 098fde114b
3 changed files with 2706 additions and 2987 deletions

File diff suppressed because it is too large Load Diff

View File

@ -1,5 +1,4 @@
/******************************************************************************
*
/*
* nicstar.h
*
* Header file for the nicstar device driver.
@ -8,15 +7,12 @@
* PowerPC support by Jay Talbott (jay_talbott@mcg.mot.com) April 1999
*
* (C) INESC 1998
*
******************************************************************************/
*/
#ifndef _LINUX_NICSTAR_H_
#define _LINUX_NICSTAR_H_
/* Includes *******************************************************************/
/* Includes */
#include <linux/types.h>
#include <linux/pci.h>
@ -25,12 +21,11 @@
#include <linux/atmdev.h>
#include <linux/atm_nicstar.h>
/* Options ********************************************************************/
/* Options */
#define NS_MAX_CARDS 4 /* Maximum number of NICStAR based cards
controlled by the device driver. Must
be <= 5 */
be <= 5 */
#undef RCQ_SUPPORT /* Do not define this for now */
@ -43,7 +38,7 @@
#define NS_VPIBITS 2 /* 0, 1, 2, or 8 */
#define NS_MAX_RCTSIZE 4096 /* Number of entries. 4096 or 16384.
Define 4096 only if (all) your card(s)
Define 4096 only if (all) your card(s)
have 32K x 32bit SRAM, in which case
setting this to 16384 will just waste a
lot of memory.
@ -51,33 +46,32 @@
128K x 32bit SRAM will limit the maximum
VCI. */
/*#define NS_PCI_LATENCY 64*/ /* Must be a multiple of 32 */
/*#define NS_PCI_LATENCY 64*//* Must be a multiple of 32 */
/* Number of buffers initially allocated */
#define NUM_SB 32 /* Must be even */
#define NUM_LB 24 /* Must be even */
#define NUM_HB 8 /* Pre-allocated huge buffers */
#define NUM_IOVB 48 /* Iovec buffers */
#define NUM_SB 32 /* Must be even */
#define NUM_LB 24 /* Must be even */
#define NUM_HB 8 /* Pre-allocated huge buffers */
#define NUM_IOVB 48 /* Iovec buffers */
/* Lower level for count of buffers */
#define MIN_SB 8 /* Must be even */
#define MIN_LB 8 /* Must be even */
#define MIN_SB 8 /* Must be even */
#define MIN_LB 8 /* Must be even */
#define MIN_HB 6
#define MIN_IOVB 8
/* Upper level for count of buffers */
#define MAX_SB 64 /* Must be even, <= 508 */
#define MAX_LB 48 /* Must be even, <= 508 */
#define MAX_SB 64 /* Must be even, <= 508 */
#define MAX_LB 48 /* Must be even, <= 508 */
#define MAX_HB 10
#define MAX_IOVB 80
/* These are the absolute maximum allowed for the ioctl() */
#define TOP_SB 256 /* Must be even, <= 508 */
#define TOP_LB 128 /* Must be even, <= 508 */
#define TOP_SB 256 /* Must be even, <= 508 */
#define TOP_LB 128 /* Must be even, <= 508 */
#define TOP_HB 64
#define TOP_IOVB 256
#define MAX_TBD_PER_VC 1 /* Number of TBDs before a TSR */
#define MAX_TBD_PER_SCQ 10 /* Only meaningful for variable rate SCQs */
@ -89,15 +83,12 @@
#define PCR_TOLERANCE (1.0001)
/* ESI stuff ******************************************************************/
/* ESI stuff */
#define NICSTAR_EPROM_MAC_ADDR_OFFSET 0x6C
#define NICSTAR_EPROM_MAC_ADDR_OFFSET_ALT 0xF6
/* #defines *******************************************************************/
/* #defines */
#define NS_IOREMAP_SIZE 4096
@ -123,22 +114,19 @@
#define NS_SMSKBSIZE (NS_SMBUFSIZE + NS_AAL0_HEADER)
#define NS_LGSKBSIZE (NS_SMBUFSIZE + NS_LGBUFSIZE)
/* NICStAR structures located in host memory */
/* NICStAR structures located in host memory **********************************/
/* RSQ - Receive Status Queue
/*
* RSQ - Receive Status Queue
*
* Written by the NICStAR, read by the device driver.
*/
typedef struct ns_rsqe
{
u32 word_1;
u32 buffer_handle;
u32 final_aal5_crc32;
u32 word_4;
typedef struct ns_rsqe {
u32 word_1;
u32 buffer_handle;
u32 final_aal5_crc32;
u32 word_4;
} ns_rsqe;
#define ns_rsqe_vpi(ns_rsqep) \
@ -175,30 +163,27 @@ typedef struct ns_rsqe
#define ns_rsqe_cellcount(ns_rsqep) \
(le32_to_cpu((ns_rsqep)->word_4) & 0x000001FF)
#define ns_rsqe_init(ns_rsqep) \
((ns_rsqep)->word_4 = cpu_to_le32(0x00000000))
((ns_rsqep)->word_4 = cpu_to_le32(0x00000000))
#define NS_RSQ_NUM_ENTRIES (NS_RSQSIZE / 16)
#define NS_RSQ_ALIGNMENT NS_RSQSIZE
/* RCQ - Raw Cell Queue
/*
* RCQ - Raw Cell Queue
*
* Written by the NICStAR, read by the device driver.
*/
typedef struct cell_payload
{
u32 word[12];
typedef struct cell_payload {
u32 word[12];
} cell_payload;
typedef struct ns_rcqe
{
u32 word_1;
u32 word_2;
u32 word_3;
u32 word_4;
cell_payload payload;
typedef struct ns_rcqe {
u32 word_1;
u32 word_2;
u32 word_3;
u32 word_4;
cell_payload payload;
} ns_rcqe;
#define NS_RCQE_SIZE 64 /* bytes */
@ -210,28 +195,25 @@ typedef struct ns_rcqe
#define ns_rcqe_nextbufhandle(ns_rcqep) \
(le32_to_cpu((ns_rcqep)->word_2))
/* SCQ - Segmentation Channel Queue
/*
* SCQ - Segmentation Channel Queue
*
* Written by the device driver, read by the NICStAR.
*/
typedef struct ns_scqe
{
u32 word_1;
u32 word_2;
u32 word_3;
u32 word_4;
typedef struct ns_scqe {
u32 word_1;
u32 word_2;
u32 word_3;
u32 word_4;
} ns_scqe;
/* NOTE: SCQ entries can be either a TBD (Transmit Buffer Descriptors)
or TSR (Transmit Status Requests) */
or TSR (Transmit Status Requests) */
#define NS_SCQE_TYPE_TBD 0x00000000
#define NS_SCQE_TYPE_TSR 0x80000000
#define NS_TBD_EOPDU 0x40000000
#define NS_TBD_AAL0 0x00000000
#define NS_TBD_AAL34 0x04000000
@ -253,10 +235,9 @@ typedef struct ns_scqe
#define ns_tbd_mkword_4(gfc, vpi, vci, pt, clp) \
(cpu_to_le32((gfc) << 28 | (vpi) << 20 | (vci) << 4 | (pt) << 1 | (clp)))
#define NS_TSR_INTENABLE 0x20000000
#define NS_TSR_SCDISVBR 0xFFFF /* Use as scdi for VBR SCD */
#define NS_TSR_SCDISVBR 0xFFFF /* Use as scdi for VBR SCD */
#define ns_tsr_mkword_1(flags) \
(cpu_to_le32(NS_SCQE_TYPE_TSR | (flags)))
@ -273,22 +254,20 @@ typedef struct ns_scqe
#define NS_SCQE_SIZE 16
/* TSQ - Transmit Status Queue
/*
* TSQ - Transmit Status Queue
*
* Written by the NICStAR, read by the device driver.
*/
typedef struct ns_tsi
{
u32 word_1;
u32 word_2;
typedef struct ns_tsi {
u32 word_1;
u32 word_2;
} ns_tsi;
/* NOTE: The first word can be a status word copied from the TSR which
originated the TSI, or a timer overflow indicator. In this last
case, the value of the first word is all zeroes. */
originated the TSI, or a timer overflow indicator. In this last
case, the value of the first word is all zeroes. */
#define NS_TSI_EMPTY 0x80000000
#define NS_TSI_TIMESTAMP_MASK 0x00FFFFFF
@ -301,12 +280,10 @@ typedef struct ns_tsi
#define ns_tsi_init(ns_tsip) \
((ns_tsip)->word_2 = cpu_to_le32(NS_TSI_EMPTY))
#define NS_TSQSIZE 8192
#define NS_TSQ_NUM_ENTRIES 1024
#define NS_TSQ_ALIGNMENT 8192
#define NS_TSI_SCDISVBR NS_TSR_SCDISVBR
#define ns_tsi_tmrof(ns_tsip) \
@ -316,26 +293,22 @@ typedef struct ns_tsi
#define ns_tsi_getscqpos(ns_tsip) \
(le32_to_cpu((ns_tsip)->word_1) & 0x00007FFF)
/* NICStAR structures located in local SRAM */
/* NICStAR structures located in local SRAM ***********************************/
/* RCT - Receive Connection Table
/*
* RCT - Receive Connection Table
*
* Written by both the NICStAR and the device driver.
*/
typedef struct ns_rcte
{
u32 word_1;
u32 buffer_handle;
u32 dma_address;
u32 aal5_crc32;
typedef struct ns_rcte {
u32 word_1;
u32 buffer_handle;
u32 dma_address;
u32 aal5_crc32;
} ns_rcte;
#define NS_RCTE_BSFB 0x00200000 /* Rev. D only */
#define NS_RCTE_BSFB 0x00200000 /* Rev. D only */
#define NS_RCTE_NZGFC 0x00100000
#define NS_RCTE_CONNECTOPEN 0x00080000
#define NS_RCTE_AALMASK 0x00070000
@ -358,25 +331,21 @@ typedef struct ns_rcte
#define NS_RCT_ENTRY_SIZE 4 /* Number of dwords */
/* NOTE: We could make macros to contruct the first word of the RCTE,
but that doesn't seem to make much sense... */
but that doesn't seem to make much sense... */
/* FBD - Free Buffer Descriptor
/*
* FBD - Free Buffer Descriptor
*
* Written by the device driver using via the command register.
*/
typedef struct ns_fbd
{
u32 buffer_handle;
u32 dma_address;
typedef struct ns_fbd {
u32 buffer_handle;
u32 dma_address;
} ns_fbd;
/* TST - Transmit Schedule Table
/*
* TST - Transmit Schedule Table
*
* Written by the device driver.
*/
@ -385,40 +354,38 @@ typedef u32 ns_tste;
#define NS_TST_OPCODE_MASK 0x60000000
#define NS_TST_OPCODE_NULL 0x00000000 /* Insert null cell */
#define NS_TST_OPCODE_FIXED 0x20000000 /* Cell from a fixed rate channel */
#define NS_TST_OPCODE_NULL 0x00000000 /* Insert null cell */
#define NS_TST_OPCODE_FIXED 0x20000000 /* Cell from a fixed rate channel */
#define NS_TST_OPCODE_VARIABLE 0x40000000
#define NS_TST_OPCODE_END 0x60000000 /* Jump */
#define NS_TST_OPCODE_END 0x60000000 /* Jump */
#define ns_tste_make(opcode, sramad) (opcode | sramad)
/* NOTE:
- When the opcode is FIXED, sramad specifies the SRAM address of the
SCD for that fixed rate channel.
SCD for that fixed rate channel.
- When the opcode is END, sramad specifies the SRAM address of the
location of the next TST entry to read.
location of the next TST entry to read.
*/
/* SCD - Segmentation Channel Descriptor
/*
* SCD - Segmentation Channel Descriptor
*
* Written by both the device driver and the NICStAR
*/
typedef struct ns_scd
{
u32 word_1;
u32 word_2;
u32 partial_aal5_crc;
u32 reserved;
ns_scqe cache_a;
ns_scqe cache_b;
typedef struct ns_scd {
u32 word_1;
u32 word_2;
u32 partial_aal5_crc;
u32 reserved;
ns_scqe cache_a;
ns_scqe cache_b;
} ns_scd;
#define NS_SCD_BASE_MASK_VAR 0xFFFFE000 /* Variable rate */
#define NS_SCD_BASE_MASK_FIX 0xFFFFFC00 /* Fixed rate */
#define NS_SCD_BASE_MASK_VAR 0xFFFFE000 /* Variable rate */
#define NS_SCD_BASE_MASK_FIX 0xFFFFFC00 /* Fixed rate */
#define NS_SCD_TAIL_MASK_VAR 0x00001FF0
#define NS_SCD_TAIL_MASK_FIX 0x000003F0
#define NS_SCD_HEAD_MASK_VAR 0x00001FF0
@ -426,13 +393,9 @@ typedef struct ns_scd
#define NS_SCD_XMITFOREVER 0x02000000
/* NOTE: There are other fields in word 2 of the SCD, but as they should
not be needed in the device driver they are not defined here. */
/* NICStAR local SRAM memory map **********************************************/
not be needed in the device driver they are not defined here. */
/* NICStAR local SRAM memory map */
#define NS_RCT 0x00000
#define NS_RCT_32_END 0x03FFF
@ -455,100 +418,93 @@ typedef struct ns_scd
#define NS_LGFBQ 0x1FC00
#define NS_LGFBQ_END 0x1FFFF
/* NISCtAR operation registers ************************************************/
/* NISCtAR operation registers */
/* See Section 3.4 of `IDT77211 NICStAR User Manual' from www.idt.com */
enum ns_regs
{
DR0 = 0x00, /* Data Register 0 R/W*/
DR1 = 0x04, /* Data Register 1 W */
DR2 = 0x08, /* Data Register 2 W */
DR3 = 0x0C, /* Data Register 3 W */
CMD = 0x10, /* Command W */
CFG = 0x14, /* Configuration R/W */
STAT = 0x18, /* Status R/W */
RSQB = 0x1C, /* Receive Status Queue Base W */
RSQT = 0x20, /* Receive Status Queue Tail R */
RSQH = 0x24, /* Receive Status Queue Head W */
CDC = 0x28, /* Cell Drop Counter R/clear */
VPEC = 0x2C, /* VPI/VCI Lookup Error Count R/clear */
ICC = 0x30, /* Invalid Cell Count R/clear */
RAWCT = 0x34, /* Raw Cell Tail R */
TMR = 0x38, /* Timer R */
TSTB = 0x3C, /* Transmit Schedule Table Base R/W */
TSQB = 0x40, /* Transmit Status Queue Base W */
TSQT = 0x44, /* Transmit Status Queue Tail R */
TSQH = 0x48, /* Transmit Status Queue Head W */
GP = 0x4C, /* General Purpose R/W */
VPM = 0x50 /* VPI/VCI Mask W */
enum ns_regs {
DR0 = 0x00, /* Data Register 0 R/W */
DR1 = 0x04, /* Data Register 1 W */
DR2 = 0x08, /* Data Register 2 W */
DR3 = 0x0C, /* Data Register 3 W */
CMD = 0x10, /* Command W */
CFG = 0x14, /* Configuration R/W */
STAT = 0x18, /* Status R/W */
RSQB = 0x1C, /* Receive Status Queue Base W */
RSQT = 0x20, /* Receive Status Queue Tail R */
RSQH = 0x24, /* Receive Status Queue Head W */
CDC = 0x28, /* Cell Drop Counter R/clear */
VPEC = 0x2C, /* VPI/VCI Lookup Error Count R/clear */
ICC = 0x30, /* Invalid Cell Count R/clear */
RAWCT = 0x34, /* Raw Cell Tail R */
TMR = 0x38, /* Timer R */
TSTB = 0x3C, /* Transmit Schedule Table Base R/W */
TSQB = 0x40, /* Transmit Status Queue Base W */
TSQT = 0x44, /* Transmit Status Queue Tail R */
TSQH = 0x48, /* Transmit Status Queue Head W */
GP = 0x4C, /* General Purpose R/W */
VPM = 0x50 /* VPI/VCI Mask W */
};
/* NICStAR commands issued to the CMD register ********************************/
/* NICStAR commands issued to the CMD register */
/* Top 4 bits are command opcode, lower 28 are parameters. */
#define NS_CMD_NO_OPERATION 0x00000000
/* params always 0 */
/* params always 0 */
#define NS_CMD_OPENCLOSE_CONNECTION 0x20000000
/* b19{1=open,0=close} b18-2{SRAM addr} */
/* b19{1=open,0=close} b18-2{SRAM addr} */
#define NS_CMD_WRITE_SRAM 0x40000000
/* b18-2{SRAM addr} b1-0{burst size} */
/* b18-2{SRAM addr} b1-0{burst size} */
#define NS_CMD_READ_SRAM 0x50000000
/* b18-2{SRAM addr} */
/* b18-2{SRAM addr} */
#define NS_CMD_WRITE_FREEBUFQ 0x60000000
/* b0{large buf indicator} */
/* b0{large buf indicator} */
#define NS_CMD_READ_UTILITY 0x80000000
/* b8{1=select UTL_CS1} b9{1=select UTL_CS0} b7-0{bus addr} */
/* b8{1=select UTL_CS1} b9{1=select UTL_CS0} b7-0{bus addr} */
#define NS_CMD_WRITE_UTILITY 0x90000000
/* b8{1=select UTL_CS1} b9{1=select UTL_CS0} b7-0{bus addr} */
/* b8{1=select UTL_CS1} b9{1=select UTL_CS0} b7-0{bus addr} */
#define NS_CMD_OPEN_CONNECTION (NS_CMD_OPENCLOSE_CONNECTION | 0x00080000)
#define NS_CMD_CLOSE_CONNECTION NS_CMD_OPENCLOSE_CONNECTION
/* NICStAR configuration bits */
/* NICStAR configuration bits *************************************************/
#define NS_CFG_SWRST 0x80000000 /* Software Reset */
#define NS_CFG_RXPATH 0x20000000 /* Receive Path Enable */
#define NS_CFG_SMBUFSIZE_MASK 0x18000000 /* Small Receive Buffer Size */
#define NS_CFG_LGBUFSIZE_MASK 0x06000000 /* Large Receive Buffer Size */
#define NS_CFG_EFBIE 0x01000000 /* Empty Free Buffer Queue
Interrupt Enable */
#define NS_CFG_RSQSIZE_MASK 0x00C00000 /* Receive Status Queue Size */
#define NS_CFG_ICACCEPT 0x00200000 /* Invalid Cell Accept */
#define NS_CFG_IGNOREGFC 0x00100000 /* Ignore General Flow Control */
#define NS_CFG_VPIBITS_MASK 0x000C0000 /* VPI/VCI Bits Size Select */
#define NS_CFG_RCTSIZE_MASK 0x00030000 /* Receive Connection Table Size */
#define NS_CFG_VCERRACCEPT 0x00008000 /* VPI/VCI Error Cell Accept */
#define NS_CFG_RXINT_MASK 0x00007000 /* End of Receive PDU Interrupt
Handling */
#define NS_CFG_RAWIE 0x00000800 /* Raw Cell Qu' Interrupt Enable */
#define NS_CFG_RSQAFIE 0x00000400 /* Receive Queue Almost Full
Interrupt Enable */
#define NS_CFG_RXRM 0x00000200 /* Receive RM Cells */
#define NS_CFG_TMRROIE 0x00000080 /* Timer Roll Over Interrupt
Enable */
#define NS_CFG_TXEN 0x00000020 /* Transmit Operation Enable */
#define NS_CFG_TXIE 0x00000010 /* Transmit Status Interrupt
Enable */
#define NS_CFG_TXURIE 0x00000008 /* Transmit Under-run Interrupt
Enable */
#define NS_CFG_UMODE 0x00000004 /* Utopia Mode (cell/byte) Select */
#define NS_CFG_TSQFIE 0x00000002 /* Transmit Status Queue Full
Interrupt Enable */
#define NS_CFG_PHYIE 0x00000001 /* PHY Interrupt Enable */
#define NS_CFG_SWRST 0x80000000 /* Software Reset */
#define NS_CFG_RXPATH 0x20000000 /* Receive Path Enable */
#define NS_CFG_SMBUFSIZE_MASK 0x18000000 /* Small Receive Buffer Size */
#define NS_CFG_LGBUFSIZE_MASK 0x06000000 /* Large Receive Buffer Size */
#define NS_CFG_EFBIE 0x01000000 /* Empty Free Buffer Queue
Interrupt Enable */
#define NS_CFG_RSQSIZE_MASK 0x00C00000 /* Receive Status Queue Size */
#define NS_CFG_ICACCEPT 0x00200000 /* Invalid Cell Accept */
#define NS_CFG_IGNOREGFC 0x00100000 /* Ignore General Flow Control */
#define NS_CFG_VPIBITS_MASK 0x000C0000 /* VPI/VCI Bits Size Select */
#define NS_CFG_RCTSIZE_MASK 0x00030000 /* Receive Connection Table Size */
#define NS_CFG_VCERRACCEPT 0x00008000 /* VPI/VCI Error Cell Accept */
#define NS_CFG_RXINT_MASK 0x00007000 /* End of Receive PDU Interrupt
Handling */
#define NS_CFG_RAWIE 0x00000800 /* Raw Cell Qu' Interrupt Enable */
#define NS_CFG_RSQAFIE 0x00000400 /* Receive Queue Almost Full
Interrupt Enable */
#define NS_CFG_RXRM 0x00000200 /* Receive RM Cells */
#define NS_CFG_TMRROIE 0x00000080 /* Timer Roll Over Interrupt
Enable */
#define NS_CFG_TXEN 0x00000020 /* Transmit Operation Enable */
#define NS_CFG_TXIE 0x00000010 /* Transmit Status Interrupt
Enable */
#define NS_CFG_TXURIE 0x00000008 /* Transmit Under-run Interrupt
Enable */
#define NS_CFG_UMODE 0x00000004 /* Utopia Mode (cell/byte) Select */
#define NS_CFG_TSQFIE 0x00000002 /* Transmit Status Queue Full
Interrupt Enable */
#define NS_CFG_PHYIE 0x00000001 /* PHY Interrupt Enable */
#define NS_CFG_SMBUFSIZE_48 0x00000000
#define NS_CFG_SMBUFSIZE_96 0x08000000
@ -579,33 +535,29 @@ enum ns_regs
#define NS_CFG_RXINT_624US 0x00003000
#define NS_CFG_RXINT_899US 0x00004000
/* NICStAR STATus bits */
/* NICStAR STATus bits ********************************************************/
#define NS_STAT_SFBQC_MASK 0xFF000000 /* hi 8 bits Small Buffer Queue Count */
#define NS_STAT_LFBQC_MASK 0x00FF0000 /* hi 8 bits Large Buffer Queue Count */
#define NS_STAT_TSIF 0x00008000 /* Transmit Status Queue Indicator */
#define NS_STAT_TXICP 0x00004000 /* Transmit Incomplete PDU */
#define NS_STAT_TSQF 0x00001000 /* Transmit Status Queue Full */
#define NS_STAT_TMROF 0x00000800 /* Timer Overflow */
#define NS_STAT_PHYI 0x00000400 /* PHY Device Interrupt */
#define NS_STAT_CMDBZ 0x00000200 /* Command Busy */
#define NS_STAT_SFBQF 0x00000100 /* Small Buffer Queue Full */
#define NS_STAT_LFBQF 0x00000080 /* Large Buffer Queue Full */
#define NS_STAT_RSQF 0x00000040 /* Receive Status Queue Full */
#define NS_STAT_EOPDU 0x00000020 /* End of PDU */
#define NS_STAT_RAWCF 0x00000010 /* Raw Cell Flag */
#define NS_STAT_SFBQE 0x00000008 /* Small Buffer Queue Empty */
#define NS_STAT_LFBQE 0x00000004 /* Large Buffer Queue Empty */
#define NS_STAT_RSQAF 0x00000002 /* Receive Status Queue Almost Full */
#define NS_STAT_SFBQC_MASK 0xFF000000 /* hi 8 bits Small Buffer Queue Count */
#define NS_STAT_LFBQC_MASK 0x00FF0000 /* hi 8 bits Large Buffer Queue Count */
#define NS_STAT_TSIF 0x00008000 /* Transmit Status Queue Indicator */
#define NS_STAT_TXICP 0x00004000 /* Transmit Incomplete PDU */
#define NS_STAT_TSQF 0x00001000 /* Transmit Status Queue Full */
#define NS_STAT_TMROF 0x00000800 /* Timer Overflow */
#define NS_STAT_PHYI 0x00000400 /* PHY Device Interrupt */
#define NS_STAT_CMDBZ 0x00000200 /* Command Busy */
#define NS_STAT_SFBQF 0x00000100 /* Small Buffer Queue Full */
#define NS_STAT_LFBQF 0x00000080 /* Large Buffer Queue Full */
#define NS_STAT_RSQF 0x00000040 /* Receive Status Queue Full */
#define NS_STAT_EOPDU 0x00000020 /* End of PDU */
#define NS_STAT_RAWCF 0x00000010 /* Raw Cell Flag */
#define NS_STAT_SFBQE 0x00000008 /* Small Buffer Queue Empty */
#define NS_STAT_LFBQE 0x00000004 /* Large Buffer Queue Empty */
#define NS_STAT_RSQAF 0x00000002 /* Receive Status Queue Almost Full */
#define ns_stat_sfbqc_get(stat) (((stat) & NS_STAT_SFBQC_MASK) >> 23)
#define ns_stat_lfbqc_get(stat) (((stat) & NS_STAT_LFBQC_MASK) >> 15)
/* #defines which depend on other #defines ************************************/
/* #defines which depend on other #defines */
#define NS_TST0 NS_TST_FRSCD
#define NS_TST1 (NS_TST_FRSCD + NS_TST_NUM_ENTRIES + 1)
@ -672,8 +624,7 @@ enum ns_regs
#define NS_CFG_TSQFIE_OPT 0x00000000
#endif /* ENABLE_TSQFIE */
/* PCI stuff ******************************************************************/
/* PCI stuff */
#ifndef PCI_VENDOR_ID_IDT
#define PCI_VENDOR_ID_IDT 0x111D
@ -683,138 +634,119 @@ enum ns_regs
#define PCI_DEVICE_ID_IDT_IDT77201 0x0001
#endif /* PCI_DEVICE_ID_IDT_IDT77201 */
/* Device driver structures ***************************************************/
/* Device driver structures */
struct ns_skb_cb {
u32 buf_type; /* BUF_SM/BUF_LG/BUF_NONE */
u32 buf_type; /* BUF_SM/BUF_LG/BUF_NONE */
};
#define NS_SKB_CB(skb) ((struct ns_skb_cb *)((skb)->cb))
typedef struct tsq_info
{
void *org;
ns_tsi *base;
ns_tsi *next;
ns_tsi *last;
typedef struct tsq_info {
void *org;
ns_tsi *base;
ns_tsi *next;
ns_tsi *last;
} tsq_info;
typedef struct scq_info
{
void *org;
ns_scqe *base;
ns_scqe *last;
ns_scqe *next;
volatile ns_scqe *tail; /* Not related to the nicstar register */
unsigned num_entries;
struct sk_buff **skb; /* Pointer to an array of pointers
to the sk_buffs used for tx */
u32 scd; /* SRAM address of the corresponding
SCD */
int tbd_count; /* Only meaningful on variable rate */
wait_queue_head_t scqfull_waitq;
volatile char full; /* SCQ full indicator */
spinlock_t lock; /* SCQ spinlock */
typedef struct scq_info {
void *org;
ns_scqe *base;
ns_scqe *last;
ns_scqe *next;
volatile ns_scqe *tail; /* Not related to the nicstar register */
unsigned num_entries;
struct sk_buff **skb; /* Pointer to an array of pointers
to the sk_buffs used for tx */
u32 scd; /* SRAM address of the corresponding
SCD */
int tbd_count; /* Only meaningful on variable rate */
wait_queue_head_t scqfull_waitq;
volatile char full; /* SCQ full indicator */
spinlock_t lock; /* SCQ spinlock */
} scq_info;
typedef struct rsq_info
{
void *org;
ns_rsqe *base;
ns_rsqe *next;
ns_rsqe *last;
typedef struct rsq_info {
void *org;
ns_rsqe *base;
ns_rsqe *next;
ns_rsqe *last;
} rsq_info;
typedef struct skb_pool
{
volatile int count; /* number of buffers in the queue */
struct sk_buff_head queue;
typedef struct skb_pool {
volatile int count; /* number of buffers in the queue */
struct sk_buff_head queue;
} skb_pool;
/* NOTE: for small and large buffer pools, the count is not used, as the
actual value used for buffer management is the one read from the
card. */
typedef struct vc_map
{
volatile unsigned int tx:1; /* TX vc? */
volatile unsigned int rx:1; /* RX vc? */
struct atm_vcc *tx_vcc, *rx_vcc;
struct sk_buff *rx_iov; /* RX iovector skb */
scq_info *scq; /* To keep track of the SCQ */
u32 cbr_scd; /* SRAM address of the corresponding
SCD. 0x00000000 for UBR/VBR/ABR */
int tbd_count;
typedef struct vc_map {
volatile unsigned int tx:1; /* TX vc? */
volatile unsigned int rx:1; /* RX vc? */
struct atm_vcc *tx_vcc, *rx_vcc;
struct sk_buff *rx_iov; /* RX iovector skb */
scq_info *scq; /* To keep track of the SCQ */
u32 cbr_scd; /* SRAM address of the corresponding
SCD. 0x00000000 for UBR/VBR/ABR */
int tbd_count;
} vc_map;
struct ns_skb_data
{
struct ns_skb_data {
struct atm_vcc *vcc;
int iovcnt;
};
#define NS_SKB(skb) (((struct ns_skb_data *) (skb)->cb))
typedef struct ns_dev
{
int index; /* Card ID to the device driver */
int sram_size; /* In k x 32bit words. 32 or 128 */
void __iomem *membase; /* Card's memory base address */
unsigned long max_pcr;
int rct_size; /* Number of entries */
int vpibits;
int vcibits;
struct pci_dev *pcidev;
struct atm_dev *atmdev;
tsq_info tsq;
rsq_info rsq;
scq_info *scq0, *scq1, *scq2; /* VBR SCQs */
skb_pool sbpool; /* Small buffers */
skb_pool lbpool; /* Large buffers */
skb_pool hbpool; /* Pre-allocated huge buffers */
skb_pool iovpool; /* iovector buffers */
volatile int efbie; /* Empty free buf. queue int. enabled */
volatile u32 tst_addr; /* SRAM address of the TST in use */
volatile int tst_free_entries;
vc_map vcmap[NS_MAX_RCTSIZE];
vc_map *tste2vc[NS_TST_NUM_ENTRIES];
vc_map *scd2vc[NS_FRSCD_NUM];
buf_nr sbnr;
buf_nr lbnr;
buf_nr hbnr;
buf_nr iovnr;
int sbfqc;
int lbfqc;
u32 sm_handle;
u32 sm_addr;
u32 lg_handle;
u32 lg_addr;
struct sk_buff *rcbuf; /* Current raw cell buffer */
u32 rawch; /* Raw cell queue head */
unsigned intcnt; /* Interrupt counter */
spinlock_t int_lock; /* Interrupt lock */
spinlock_t res_lock; /* Card resource lock */
typedef struct ns_dev {
int index; /* Card ID to the device driver */
int sram_size; /* In k x 32bit words. 32 or 128 */
void __iomem *membase; /* Card's memory base address */
unsigned long max_pcr;
int rct_size; /* Number of entries */
int vpibits;
int vcibits;
struct pci_dev *pcidev;
struct atm_dev *atmdev;
tsq_info tsq;
rsq_info rsq;
scq_info *scq0, *scq1, *scq2; /* VBR SCQs */
skb_pool sbpool; /* Small buffers */
skb_pool lbpool; /* Large buffers */
skb_pool hbpool; /* Pre-allocated huge buffers */
skb_pool iovpool; /* iovector buffers */
volatile int efbie; /* Empty free buf. queue int. enabled */
volatile u32 tst_addr; /* SRAM address of the TST in use */
volatile int tst_free_entries;
vc_map vcmap[NS_MAX_RCTSIZE];
vc_map *tste2vc[NS_TST_NUM_ENTRIES];
vc_map *scd2vc[NS_FRSCD_NUM];
buf_nr sbnr;
buf_nr lbnr;
buf_nr hbnr;
buf_nr iovnr;
int sbfqc;
int lbfqc;
u32 sm_handle;
u32 sm_addr;
u32 lg_handle;
u32 lg_addr;
struct sk_buff *rcbuf; /* Current raw cell buffer */
u32 rawch; /* Raw cell queue head */
unsigned intcnt; /* Interrupt counter */
spinlock_t int_lock; /* Interrupt lock */
spinlock_t res_lock; /* Card resource lock */
} ns_dev;
/* NOTE: Each tste2vc entry relates a given TST entry to the corresponding
CBR vc. If the entry is not allocated, it must be NULL.
There are two TSTs so the driver can modify them on the fly
without stopping the transmission.
scd2vc allows us to find out unused fixed rate SCDs, because
they must have a NULL pointer here. */
CBR vc. If the entry is not allocated, it must be NULL.
There are two TSTs so the driver can modify them on the fly
without stopping the transmission.
scd2vc allows us to find out unused fixed rate SCDs, because
they must have a NULL pointer here. */
#endif /* _LINUX_NICSTAR_H_ */

View File

@ -13,15 +13,15 @@ typedef void __iomem *virt_addr_t;
#define CYCLE_DELAY 5
/* This was the original definition
/*
This was the original definition
#define osp_MicroDelay(microsec) \
do { int _i = 4*microsec; while (--_i > 0) { __SLOW_DOWN_IO; }} while (0)
*/
#define osp_MicroDelay(microsec) {unsigned long useconds = (microsec); \
udelay((useconds));}
/* The following tables represent the timing diagrams found in
/*
* The following tables represent the timing diagrams found in
* the Data Sheet for the Xicor X25020 EEProm. The #defines below
* represent the bits in the NICStAR's General Purpose register
* that must be toggled for the corresponding actions on the EEProm
@ -31,86 +31,80 @@ typedef void __iomem *virt_addr_t;
/* Write Data To EEProm from SI line on rising edge of CLK */
/* Read Data From EEProm on falling edge of CLK */
#define CS_HIGH 0x0002 /* Chip select high */
#define CS_LOW 0x0000 /* Chip select low (active low)*/
#define CLK_HIGH 0x0004 /* Clock high */
#define CLK_LOW 0x0000 /* Clock low */
#define SI_HIGH 0x0001 /* Serial input data high */
#define SI_LOW 0x0000 /* Serial input data low */
#define CS_HIGH 0x0002 /* Chip select high */
#define CS_LOW 0x0000 /* Chip select low (active low) */
#define CLK_HIGH 0x0004 /* Clock high */
#define CLK_LOW 0x0000 /* Clock low */
#define SI_HIGH 0x0001 /* Serial input data high */
#define SI_LOW 0x0000 /* Serial input data low */
/* Read Status Register = 0000 0101b */
#if 0
static u_int32_t rdsrtab[] =
{
CS_HIGH | CLK_HIGH,
CS_LOW | CLK_LOW,
CLK_HIGH, /* 0 */
CLK_LOW,
CLK_HIGH, /* 0 */
CLK_LOW,
CLK_HIGH, /* 0 */
CLK_LOW,
CLK_HIGH, /* 0 */
CLK_LOW,
CLK_HIGH, /* 0 */
CLK_LOW | SI_HIGH,
CLK_HIGH | SI_HIGH, /* 1 */
CLK_LOW | SI_LOW,
CLK_HIGH, /* 0 */
CLK_LOW | SI_HIGH,
CLK_HIGH | SI_HIGH /* 1 */
static u_int32_t rdsrtab[] = {
CS_HIGH | CLK_HIGH,
CS_LOW | CLK_LOW,
CLK_HIGH, /* 0 */
CLK_LOW,
CLK_HIGH, /* 0 */
CLK_LOW,
CLK_HIGH, /* 0 */
CLK_LOW,
CLK_HIGH, /* 0 */
CLK_LOW,
CLK_HIGH, /* 0 */
CLK_LOW | SI_HIGH,
CLK_HIGH | SI_HIGH, /* 1 */
CLK_LOW | SI_LOW,
CLK_HIGH, /* 0 */
CLK_LOW | SI_HIGH,
CLK_HIGH | SI_HIGH /* 1 */
};
#endif /* 0 */
#endif /* 0 */
/* Read from EEPROM = 0000 0011b */
static u_int32_t readtab[] =
{
/*
CS_HIGH | CLK_HIGH,
*/
CS_LOW | CLK_LOW,
CLK_HIGH, /* 0 */
CLK_LOW,
CLK_HIGH, /* 0 */
CLK_LOW,
CLK_HIGH, /* 0 */
CLK_LOW,
CLK_HIGH, /* 0 */
CLK_LOW,
CLK_HIGH, /* 0 */
CLK_LOW,
CLK_HIGH, /* 0 */
CLK_LOW | SI_HIGH,
CLK_HIGH | SI_HIGH, /* 1 */
CLK_LOW | SI_HIGH,
CLK_HIGH | SI_HIGH /* 1 */
static u_int32_t readtab[] = {
/*
CS_HIGH | CLK_HIGH,
*/
CS_LOW | CLK_LOW,
CLK_HIGH, /* 0 */
CLK_LOW,
CLK_HIGH, /* 0 */
CLK_LOW,
CLK_HIGH, /* 0 */
CLK_LOW,
CLK_HIGH, /* 0 */
CLK_LOW,
CLK_HIGH, /* 0 */
CLK_LOW,
CLK_HIGH, /* 0 */
CLK_LOW | SI_HIGH,
CLK_HIGH | SI_HIGH, /* 1 */
CLK_LOW | SI_HIGH,
CLK_HIGH | SI_HIGH /* 1 */
};
/* Clock to read from/write to the eeprom */
static u_int32_t clocktab[] =
{
CLK_LOW,
CLK_HIGH,
CLK_LOW,
CLK_HIGH,
CLK_LOW,
CLK_HIGH,
CLK_LOW,
CLK_HIGH,
CLK_LOW,
CLK_HIGH,
CLK_LOW,
CLK_HIGH,
CLK_LOW,
CLK_HIGH,
CLK_LOW,
CLK_HIGH,
CLK_LOW
static u_int32_t clocktab[] = {
CLK_LOW,
CLK_HIGH,
CLK_LOW,
CLK_HIGH,
CLK_LOW,
CLK_HIGH,
CLK_LOW,
CLK_HIGH,
CLK_LOW,
CLK_HIGH,
CLK_LOW,
CLK_HIGH,
CLK_LOW,
CLK_HIGH,
CLK_LOW,
CLK_HIGH,
CLK_LOW
};
#define NICSTAR_REG_WRITE(bs, reg, val) \
while ( readl(bs + STAT) & 0x0200 ) ; \
writel((val),(base)+(reg))
@ -124,153 +118,131 @@ static u_int32_t clocktab[] =
* register.
*/
#if 0
u_int32_t
nicstar_read_eprom_status( virt_addr_t base )
u_int32_t nicstar_read_eprom_status(virt_addr_t base)
{
u_int32_t val;
u_int32_t rbyte;
int32_t i, j;
u_int32_t val;
u_int32_t rbyte;
int32_t i, j;
/* Send read instruction */
val = NICSTAR_REG_READ( base, NICSTAR_REG_GENERAL_PURPOSE ) & 0xFFFFFFF0;
/* Send read instruction */
val = NICSTAR_REG_READ(base, NICSTAR_REG_GENERAL_PURPOSE) & 0xFFFFFFF0;
for (i=0; i<ARRAY_SIZE(rdsrtab); i++)
{
NICSTAR_REG_WRITE( base, NICSTAR_REG_GENERAL_PURPOSE,
(val | rdsrtab[i]) );
osp_MicroDelay( CYCLE_DELAY );
}
for (i = 0; i < ARRAY_SIZE(rdsrtab); i++) {
NICSTAR_REG_WRITE(base, NICSTAR_REG_GENERAL_PURPOSE,
(val | rdsrtab[i]));
osp_MicroDelay(CYCLE_DELAY);
}
/* Done sending instruction - now pull data off of bit 16, MSB first */
/* Data clocked out of eeprom on falling edge of clock */
/* Done sending instruction - now pull data off of bit 16, MSB first */
/* Data clocked out of eeprom on falling edge of clock */
rbyte = 0;
for (i=7, j=0; i>=0; i--)
{
NICSTAR_REG_WRITE( base, NICSTAR_REG_GENERAL_PURPOSE,
(val | clocktab[j++]) );
rbyte |= (((NICSTAR_REG_READ( base, NICSTAR_REG_GENERAL_PURPOSE)
& 0x00010000) >> 16) << i);
NICSTAR_REG_WRITE( base, NICSTAR_REG_GENERAL_PURPOSE,
(val | clocktab[j++]) );
osp_MicroDelay( CYCLE_DELAY );
}
NICSTAR_REG_WRITE( base, NICSTAR_REG_GENERAL_PURPOSE, 2 );
osp_MicroDelay( CYCLE_DELAY );
return rbyte;
rbyte = 0;
for (i = 7, j = 0; i >= 0; i--) {
NICSTAR_REG_WRITE(base, NICSTAR_REG_GENERAL_PURPOSE,
(val | clocktab[j++]));
rbyte |= (((NICSTAR_REG_READ(base, NICSTAR_REG_GENERAL_PURPOSE)
& 0x00010000) >> 16) << i);
NICSTAR_REG_WRITE(base, NICSTAR_REG_GENERAL_PURPOSE,
(val | clocktab[j++]));
osp_MicroDelay(CYCLE_DELAY);
}
NICSTAR_REG_WRITE(base, NICSTAR_REG_GENERAL_PURPOSE, 2);
osp_MicroDelay(CYCLE_DELAY);
return rbyte;
}
#endif /* 0 */
#endif /* 0 */
/*
* This routine will clock the Read_data function into the X2520
* eeprom, followed by the address to read from, through the NicSTaR's General
* Purpose register.
*/
static u_int8_t
read_eprom_byte(virt_addr_t base, u_int8_t offset)
static u_int8_t read_eprom_byte(virt_addr_t base, u_int8_t offset)
{
u_int32_t val = 0;
int i,j=0;
u_int8_t tempread = 0;
u_int32_t val = 0;
int i, j = 0;
u_int8_t tempread = 0;
val = NICSTAR_REG_READ( base, NICSTAR_REG_GENERAL_PURPOSE ) & 0xFFFFFFF0;
val = NICSTAR_REG_READ(base, NICSTAR_REG_GENERAL_PURPOSE) & 0xFFFFFFF0;
/* Send READ instruction */
for (i=0; i<ARRAY_SIZE(readtab); i++)
{
NICSTAR_REG_WRITE( base, NICSTAR_REG_GENERAL_PURPOSE,
(val | readtab[i]) );
osp_MicroDelay( CYCLE_DELAY );
}
/* Send READ instruction */
for (i = 0; i < ARRAY_SIZE(readtab); i++) {
NICSTAR_REG_WRITE(base, NICSTAR_REG_GENERAL_PURPOSE,
(val | readtab[i]));
osp_MicroDelay(CYCLE_DELAY);
}
/* Next, we need to send the byte address to read from */
for (i=7; i>=0; i--)
{
NICSTAR_REG_WRITE( base, NICSTAR_REG_GENERAL_PURPOSE,
(val | clocktab[j++] | ((offset >> i) & 1) ) );
osp_MicroDelay(CYCLE_DELAY);
NICSTAR_REG_WRITE( base, NICSTAR_REG_GENERAL_PURPOSE,
(val | clocktab[j++] | ((offset >> i) & 1) ) );
osp_MicroDelay( CYCLE_DELAY );
}
/* Next, we need to send the byte address to read from */
for (i = 7; i >= 0; i--) {
NICSTAR_REG_WRITE(base, NICSTAR_REG_GENERAL_PURPOSE,
(val | clocktab[j++] | ((offset >> i) & 1)));
osp_MicroDelay(CYCLE_DELAY);
NICSTAR_REG_WRITE(base, NICSTAR_REG_GENERAL_PURPOSE,
(val | clocktab[j++] | ((offset >> i) & 1)));
osp_MicroDelay(CYCLE_DELAY);
}
j = 0;
/* Now, we can read data from the eeprom by clocking it in */
for (i=7; i>=0; i--)
{
NICSTAR_REG_WRITE( base, NICSTAR_REG_GENERAL_PURPOSE,
(val | clocktab[j++]) );
osp_MicroDelay( CYCLE_DELAY );
tempread |= (((NICSTAR_REG_READ( base, NICSTAR_REG_GENERAL_PURPOSE )
& 0x00010000) >> 16) << i);
NICSTAR_REG_WRITE( base, NICSTAR_REG_GENERAL_PURPOSE,
(val | clocktab[j++]) );
osp_MicroDelay( CYCLE_DELAY );
}
j = 0;
NICSTAR_REG_WRITE( base, NICSTAR_REG_GENERAL_PURPOSE, 2 );
osp_MicroDelay( CYCLE_DELAY );
return tempread;
/* Now, we can read data from the eeprom by clocking it in */
for (i = 7; i >= 0; i--) {
NICSTAR_REG_WRITE(base, NICSTAR_REG_GENERAL_PURPOSE,
(val | clocktab[j++]));
osp_MicroDelay(CYCLE_DELAY);
tempread |=
(((NICSTAR_REG_READ(base, NICSTAR_REG_GENERAL_PURPOSE)
& 0x00010000) >> 16) << i);
NICSTAR_REG_WRITE(base, NICSTAR_REG_GENERAL_PURPOSE,
(val | clocktab[j++]));
osp_MicroDelay(CYCLE_DELAY);
}
NICSTAR_REG_WRITE(base, NICSTAR_REG_GENERAL_PURPOSE, 2);
osp_MicroDelay(CYCLE_DELAY);
return tempread;
}
static void
nicstar_init_eprom( virt_addr_t base )
static void nicstar_init_eprom(virt_addr_t base)
{
u_int32_t val;
u_int32_t val;
/*
* turn chip select off
*/
val = NICSTAR_REG_READ(base, NICSTAR_REG_GENERAL_PURPOSE) & 0xFFFFFFF0;
/*
* turn chip select off
*/
val = NICSTAR_REG_READ(base, NICSTAR_REG_GENERAL_PURPOSE) & 0xFFFFFFF0;
NICSTAR_REG_WRITE(base, NICSTAR_REG_GENERAL_PURPOSE,
(val | CS_HIGH | CLK_HIGH));
osp_MicroDelay( CYCLE_DELAY );
NICSTAR_REG_WRITE(base, NICSTAR_REG_GENERAL_PURPOSE,
(val | CS_HIGH | CLK_HIGH));
osp_MicroDelay(CYCLE_DELAY);
NICSTAR_REG_WRITE(base, NICSTAR_REG_GENERAL_PURPOSE,
(val | CS_HIGH | CLK_LOW));
osp_MicroDelay( CYCLE_DELAY );
NICSTAR_REG_WRITE(base, NICSTAR_REG_GENERAL_PURPOSE,
(val | CS_HIGH | CLK_LOW));
osp_MicroDelay(CYCLE_DELAY);
NICSTAR_REG_WRITE(base, NICSTAR_REG_GENERAL_PURPOSE,
(val | CS_HIGH | CLK_HIGH));
osp_MicroDelay( CYCLE_DELAY );
NICSTAR_REG_WRITE(base, NICSTAR_REG_GENERAL_PURPOSE,
(val | CS_HIGH | CLK_HIGH));
osp_MicroDelay(CYCLE_DELAY);
NICSTAR_REG_WRITE(base, NICSTAR_REG_GENERAL_PURPOSE,
(val | CS_HIGH | CLK_LOW));
osp_MicroDelay( CYCLE_DELAY );
NICSTAR_REG_WRITE(base, NICSTAR_REG_GENERAL_PURPOSE,
(val | CS_HIGH | CLK_LOW));
osp_MicroDelay(CYCLE_DELAY);
}
/*
* This routine will be the interface to the ReadPromByte function
* above.
*/
*/
static void
nicstar_read_eprom(
virt_addr_t base,
u_int8_t prom_offset,
u_int8_t *buffer,
u_int32_t nbytes )
nicstar_read_eprom(virt_addr_t base,
u_int8_t prom_offset, u_int8_t * buffer, u_int32_t nbytes)
{
u_int i;
for (i=0; i<nbytes; i++)
{
buffer[i] = read_eprom_byte( base, prom_offset );
++prom_offset;
osp_MicroDelay( CYCLE_DELAY );
}
u_int i;
for (i = 0; i < nbytes; i++) {
buffer[i] = read_eprom_byte(base, prom_offset);
++prom_offset;
osp_MicroDelay(CYCLE_DELAY);
}
}
/*
void osp_MicroDelay(int x) {
}
*/