siimage: PIO1/2 taskfile transfer overclocking fix

Fix two typos found by SiI680A documentation check.  They caused the taskfile
transfer overclocking:

- in PIO mode 1 as 0x2283 must be used for both data and taskfile transfers;

- in PIO mode 2 as data and taskfile timings are swapped when writing to the
  MMIO regs.

Fix coding style and trailing whitespace in enclosing statements while at it...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

 drivers/ide/pci/siimage.c |   59 ++++++++++++++++++++++------------------------
 1 file changed, 29 insertions(+), 30 deletions(-)
This commit is contained in:
Sergei Shtylyov 2007-02-17 02:40:22 +01:00 committed by Bartlomiej Zolnierkiewicz
parent 6e6cd4c438
commit 075cb65511

View File

@ -1,8 +1,9 @@
/*
* linux/drivers/ide/pci/siimage.c Version 1.07 Nov 30, 2003
* linux/drivers/ide/pci/siimage.c Version 1.11 Jan 27, 2007
*
* Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2003 Red Hat <alan@redhat.com>
* Copyright (C) 2007 MontaVista Software, Inc.
*
* May be copied or modified under the terms of the GNU General Public License
*
@ -205,41 +206,39 @@ static void siimage_tuneproc (ide_drive_t *drive, byte mode_wanted)
unsigned long tfaddr = siimage_selreg(hwif, 0x02);
/* cheat for now and use the docs */
switch(mode_wanted) {
case 4:
speedp = 0x10c1;
speedt = 0x10c1;
break;
case 3:
speedp = 0x10C3;
speedt = 0x10C3;
break;
case 2:
speedp = 0x1104;
speedt = 0x1281;
break;
case 1:
speedp = 0x2283;
speedt = 0x1281;
break;
case 0:
default:
speedp = 0x328A;
speedt = 0x328A;
break;
switch (mode_wanted) {
case 4:
speedp = 0x10c1;
speedt = 0x10c1;
break;
case 3:
speedp = 0x10c3;
speedt = 0x10c3;
break;
case 2:
speedp = 0x1104;
speedt = 0x1281;
break;
case 1:
speedp = 0x2283;
speedt = 0x2283;
break;
case 0:
default:
speedp = 0x328a;
speedt = 0x328a;
break;
}
if (hwif->mmio)
{
hwif->OUTW(speedt, addr);
hwif->OUTW(speedp, tfaddr);
if (hwif->mmio) {
hwif->OUTW(speedp, addr);
hwif->OUTW(speedt, tfaddr);
/* Now set up IORDY */
if(mode_wanted == 3 || mode_wanted == 4)
hwif->OUTW(hwif->INW(tfaddr-2)|0x200, tfaddr-2);
else
hwif->OUTW(hwif->INW(tfaddr-2)&~0x200, tfaddr-2);
}
else
{
} else {
pci_write_config_word(hwif->pci_dev, addr, speedp);
pci_write_config_word(hwif->pci_dev, tfaddr, speedt);
pci_read_config_word(hwif->pci_dev, tfaddr-2, &speedp);