bnx2x: Adjust BCM8726 module detection settings

Move BCM8726 module detection code into a separate function to be called only once during initialization.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Yaniv Rosner 2011-05-31 21:28:43 +00:00 committed by David S. Miller
parent 9045f6b44a
commit 020c7e3f3c
5 changed files with 85 additions and 29 deletions

View File

@ -263,7 +263,10 @@ struct port_hw_cfg { /* port 0: 0x12c port 1: 0x2bc */
#define PORT_HW_CFG_FAULT_MODULE_LED_GPIO2 0x00000200
#define PORT_HW_CFG_FAULT_MODULE_LED_GPIO3 0x00000300
#define PORT_HW_CFG_FAULT_MODULE_LED_DISABLED 0x00000400
u32 Reserved01[11]; /* 0x158 */
u32 Reserved01[10]; /* 0x158 */
u32 aeu_int_mask; /* 0x190 */
u32 media_type; /* 0x194 */
#define PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK 0x000000FF

View File

@ -1915,8 +1915,15 @@ void bnx2x_link_status_update(struct link_params *params,
PORT_HW_CFG_MEDIA_TYPE_PHY2_SHIFT;
DP(NETIF_MSG_LINK, "media_types = 0x%x\n", media_types);
DP(NETIF_MSG_LINK, "link_status 0x%x phy_link_up %x\n",
vars->link_status, vars->phy_link_up);
/* Sync AEU offset */
sync_offset = params->shmem_base +
offsetof(struct shmem_region,
dev_info.port_hw_config[port].aeu_int_mask);
vars->aeu_int_mask = REG_RD(bp, sync_offset);
DP(NETIF_MSG_LINK, "link_status 0x%x phy_link_up %x int_mask 0x%x\n",
vars->link_status, vars->phy_link_up, vars->aeu_int_mask);
DP(NETIF_MSG_LINK, "line_speed %x duplex %x flow_ctrl 0x%x\n",
vars->line_speed, vars->duplex, vars->flow_ctrl);
}
@ -5522,8 +5529,6 @@ static int bnx2x_8726_config_init(struct bnx2x_phy *phy,
struct link_vars *vars)
{
struct bnx2x *bp = params->bp;
u32 val;
u32 swap_val, swap_override, aeu_gpio_mask, offset;
DP(NETIF_MSG_LINK, "Initializing BCM8726\n");
bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1<<15);
@ -5602,30 +5607,6 @@ static int bnx2x_8726_config_init(struct bnx2x_phy *phy,
phy->tx_preemphasis[1]);
}
/* Set GPIO3 to trigger SFP+ module insertion/removal */
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3,
MISC_REGISTERS_GPIO_INPUT_HI_Z, params->port);
/* The GPIO should be swapped if the swap register is set and active */
swap_val = REG_RD(bp, NIG_REG_PORT_SWAP);
swap_override = REG_RD(bp, NIG_REG_STRAP_OVERRIDE);
/* Select function upon port-swap configuration */
if (params->port == 0) {
offset = MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0;
aeu_gpio_mask = (swap_val && swap_override) ?
AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_1 :
AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_0;
} else {
offset = MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0;
aeu_gpio_mask = (swap_val && swap_override) ?
AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_0 :
AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_1;
}
val = REG_RD(bp, offset);
/* add GPIO3 to group */
val |= aeu_gpio_mask;
REG_WR(bp, offset, val);
return 0;
}
@ -8521,3 +8502,66 @@ void bnx2x_hw_reset_phy(struct link_params *params)
}
}
}
void bnx2x_init_mod_abs_int(struct bnx2x *bp, struct link_vars *vars,
u32 chip_id, u32 shmem_base, u32 shmem2_base,
u8 port)
{
u8 gpio_num = 0xff, gpio_port = 0xff, phy_index;
u32 val;
u32 offset, aeu_mask, swap_val, swap_override, sync_offset;
{
struct bnx2x_phy phy;
for (phy_index = EXT_PHY1; phy_index < MAX_PHYS;
phy_index++) {
if (bnx2x_populate_phy(bp, phy_index, shmem_base,
shmem2_base, port, &phy)
!= 0) {
DP(NETIF_MSG_LINK, "populate phy failed\n");
return;
}
if (phy.type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726) {
gpio_num = MISC_REGISTERS_GPIO_3;
gpio_port = port;
break;
}
}
}
if (gpio_num == 0xff)
return;
/* Set GPIO3 to trigger SFP+ module insertion/removal */
bnx2x_set_gpio(bp, gpio_num, MISC_REGISTERS_GPIO_INPUT_HI_Z, gpio_port);
swap_val = REG_RD(bp, NIG_REG_PORT_SWAP);
swap_override = REG_RD(bp, NIG_REG_STRAP_OVERRIDE);
gpio_port ^= (swap_val && swap_override);
vars->aeu_int_mask = AEU_INPUTS_ATTN_BITS_GPIO0_FUNCTION_0 <<
(gpio_num + (gpio_port << 2));
sync_offset = shmem_base +
offsetof(struct shmem_region,
dev_info.port_hw_config[port].aeu_int_mask);
REG_WR(bp, sync_offset, vars->aeu_int_mask);
DP(NETIF_MSG_LINK, "Setting MOD_ABS (GPIO%d_P%d) AEU to 0x%x\n",
gpio_num, gpio_port, vars->aeu_int_mask);
if (port == 0)
offset = MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0;
else
offset = MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0;
/* Open appropriate AEU for interrupts */
aeu_mask = REG_RD(bp, offset);
aeu_mask |= vars->aeu_int_mask;
REG_WR(bp, offset, aeu_mask);
/* Enable the GPIO to trigger interrupt */
val = REG_RD(bp, MISC_REG_GPIO_EVENT_EN);
val |= 1 << (gpio_num + (gpio_port << 2));
REG_WR(bp, MISC_REG_GPIO_EVENT_EN, val);
}

View File

@ -277,6 +277,7 @@ struct link_vars {
u8 fault_detected;
u8 rsrv1;
u16 rsrv2;
u32 aeu_int_mask;
};
/***********************************************************/
@ -401,4 +402,7 @@ int bnx2x_ets_strict(const struct link_params *params, const u8 strict_cos);
void bnx2x_pfc_statistic(struct link_params *params, struct link_vars *vars,
u32 pfc_frames_sent[2],
u32 pfc_frames_received[2]);
void bnx2x_init_mod_abs_int(struct bnx2x *bp, struct link_vars *vars,
u32 chip_id, u32 shmem_base, u32 shmem2_base,
u8 port);
#endif /* BNX2X_LINK_H */

View File

@ -4452,6 +4452,10 @@ void bnx2x_nic_init(struct bnx2x *bp, u32 load_code)
#endif
/* Initialize MOD_ABS interrupts */
bnx2x_init_mod_abs_int(bp, &bp->link_vars, bp->common.chip_id,
bp->common.shmem_base, bp->common.shmem2_base,
BP_PORT(bp));
/* ensure status block indices were read */
rmb();

View File

@ -5184,6 +5184,7 @@
#define AEU_INPUTS_ATTN_BITS_DMAE_HW_INTERRUPT (1<<11)
#define AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT (1<<13)
#define AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR (1<<12)
#define AEU_INPUTS_ATTN_BITS_GPIO0_FUNCTION_0 (1<<2)
#define AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_0 (1<<5)
#define AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_1 (1<<9)
#define AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR (1<<12)