leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

USB: rio500: Remove Rio 500 kernel driver

Browse Source 
The Rio500 kernel driver has not been used by Rio500 owners since 2001
not long after the rio500 project added support for a user-space USB stack
through the very first versions of usbdevfs and then libusb.

Support for the kernel driver was removed from the upstream utilities
in 2008:
943f624ab7

Cc: Cesar Miquel <miquel@df.uba.ar>
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/6251c17584d220472ce882a3d9c199c401a51a71.camel@hadess.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Bastien Nocera 2019-09-23 18:18:43 +02:00 committed by Greg Kroah-Hartman
parent 54ecb8f702
commit 015664d152
13 changed files with 0 additions and 708 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

109
Documentation/usb/rio.rst
View File

@ -1,109 +0,0 @@
============
Diamonds Rio
============
Copyright (C) 1999, 2000 Bruce Tenison
Portions Copyright (C) 1999, 2000 David Nelson
Thanks to David Nelson for guidance and the usage of the scanner.txt
and scanner.c files to model our driver and this informative file.
Mar. 2, 2000
Changes
=======
- Initial Revision
Overview
========
This README will address issues regarding how to configure the kernel
to access a RIO 500 mp3 player.
Before I explain how to use this to access the Rio500 please be warned:
.. warning::
Please note that this software is still under development. The authors
are in no way responsible for any damage that may occur, no matter how
inconsequential.
It seems that the Rio has a problem when sending .mp3 with low batteries.
I suggest when the batteries are low and you want to transfer stuff that you
replace it with a fresh one. In my case, what happened is I lost two 16kb
blocks (they are no longer usable to store information to it). But I don't
know if that's normal or not; it could simply be a problem with the flash
memory.
In an extreme case, I left my Rio playing overnight and the batteries wore
down to nothing and appear to have corrupted the flash memory. My RIO
needed to be replaced as a result. Diamond tech support is aware of the
problem. Do NOT allow your batteries to wear down to nothing before
changing them. It appears RIO 500 firmware does not handle low battery
power well at all.
On systems with OHCI controllers, the kernel OHCI code appears to have
power on problems with some chipsets. If you are having problems
connecting to your RIO 500, try turning it on first and then plugging it
into the USB cable.
Contact Information
-------------------
The main page for the project is hosted at sourceforge.net in the following
URL: <http://rio500.sourceforge.net>. You can also go to the project's
sourceforge home page at: <http://sourceforge.net/projects/rio500/>.
There is also a mailing list: rio500-users@lists.sourceforge.net
Authors
-------
Most of the code was written by Cesar Miquel <miquel@df.uba.ar>. Keith
Clayton <kclayton@jps.net> is incharge of the PPC port and making sure
things work there. Bruce Tenison <btenison@dibbs.net> is adding support
for .fon files and also does testing. The program will mostly sure be
re-written and Pete Ikusz along with the rest will re-design it. I would
also like to thank Tri Nguyen <tmn_3022000@hotmail.com> who provided use
with some important information regarding the communication with the Rio.
Additional Information and userspace tools
http://rio500.sourceforge.net/
Requirements
============
A host with a USB port running a Linux kernel with RIO 500 support enabled.
The driver is a module called rio500, which should be automatically loaded
as you plug in your device. If that fails you can manually load it with
modprobe rio500
Udev should automatically create a device node as soon as plug in your device.
If that fails, you can manually add a device for the USB rio500::
mknod /dev/usb/rio500 c 180 64
In that case, set appropriate permissions for /dev/usb/rio500 (don't forget
about group and world permissions). Both read and write permissions are
required for proper operation.
That's it. The Rio500 Utils at: http://rio500.sourceforge.net should
be able to access the rio500.
Limits
======
You can use only a single rio500 device at a time with your computer.
Bugs
====
If you encounter any problems feel free to drop me an email.
Bruce Tenison
btenison@dibbs.net

7
MAINTAINERS
View File

@ -16762,13 +16762,6 @@ W: http://www.linux-usb.org/usbnet
S: Maintained
F: drivers/net/usb/dm9601.c
USB DIAMOND RIO500 DRIVER
M: Cesar Miquel <miquel@df.uba.ar>
L: rio500-users@lists.sourceforge.net
W: http://rio500.sourceforge.net
S: Maintained
F: drivers/usb/misc/rio500*
USB EHCI DRIVER
M: Alan Stern <stern@rowland.harvard.edu>
L: linux-usb@vger.kernel.org

1
arch/arm/configs/badge4_defconfig
View File

@ -91,7 +91,6 @@ CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_RIO500=m
CONFIG_EXT2_FS=m
CONFIG_EXT3_FS=m
CONFIG_MSDOS_FS=y

1
arch/arm/configs/corgi_defconfig
View File

@ -195,7 +195,6 @@ CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_CYTHERM=m

1
arch/arm/configs/pxa_defconfig
View File

@ -581,7 +581,6 @@ CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_CYTHERM=m

1
arch/arm/configs/s3c2410_defconfig
View File

@ -327,7 +327,6 @@ CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_CYPRESS_CY7C63=m

1
arch/arm/configs/spitz_defconfig
View File

@ -189,7 +189,6 @@ CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_CYTHERM=m

1
arch/mips/configs/mtx1_defconfig
View File

@ -571,7 +571,6 @@ CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_CYPRESS_CY7C63=m

1
arch/mips/configs/rm200_defconfig
View File

@ -314,7 +314,6 @@ CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_CYTHERM=m

10
drivers/usb/misc/Kconfig
View File

@ -47,16 +47,6 @@ config USB_SEVSEG
To compile this driver as a module, choose M here: the
module will be called usbsevseg.
config USB_RIO500
tristate "USB Diamond Rio500 support"
help
Say Y here if you want to connect a USB Rio500 mp3 player to your
computer's USB port. Please read <file:Documentation/usb/rio.rst>
for more information.
To compile this driver as a module, choose M here: the
module will be called rio500.
config USB_LEGOTOWER
tristate "USB Lego Infrared Tower support"
help

1
drivers/usb/misc/Makefile
View File

@ -17,7 +17,6 @@ obj-$(CONFIG_USB_ISIGHTFW) += isight_firmware.o
obj-$(CONFIG_USB_LCD) += usblcd.o
obj-$(CONFIG_USB_LD) += ldusb.o
obj-$(CONFIG_USB_LEGOTOWER) += legousbtower.o
obj-$(CONFIG_USB_RIO500) += rio500.o
obj-$(CONFIG_USB_TEST) += usbtest.o
obj-$(CONFIG_USB_EHSET_TEST_FIXTURE) += ehset.o
obj-$(CONFIG_USB_TRANCEVIBRATOR) += trancevibrator.o

554
drivers/usb/misc/rio500.c
View File

@ -1,554 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/* -*- linux-c -*- */
/*
* Driver for USB Rio 500
*
* Cesar Miquel (miquel@df.uba.ar)
*
* based on hp_scanner.c by David E. Nelson (dnelson@jump.net)
*
* Based upon mouse.c (Brad Keryan) and printer.c (Michael Gee).
*
* Changelog:
* 30/05/2003 replaced lock/unlock kernel with up/down
* Daniele Bellucci bellucda@tiscali.it
* */
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/sched/signal.h>
#include <linux/mutex.h>
#include <linux/errno.h>
#include <linux/random.h>
#include <linux/poll.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/usb.h>
#include <linux/wait.h>
#include "rio500_usb.h"
#define DRIVER_AUTHOR "Cesar Miquel <miquel@df.uba.ar>"
#define DRIVER_DESC "USB Rio 500 driver"
#define RIO_MINOR 64
/* stall/wait timeout for rio */
#define NAK_TIMEOUT (HZ)
#define IBUF_SIZE 0x1000
/* Size of the rio buffer */
#define OBUF_SIZE 0x10000
struct rio_usb_data {
struct usb_device *rio_dev; /* init: probe_rio */
unsigned int ifnum; /* Interface number of the USB device */
int isopen; /* nz if open */
int present; /* Device is present on the bus */
char *obuf, *ibuf; /* transfer buffers */
char bulk_in_ep, bulk_out_ep; /* Endpoint assignments */
wait_queue_head_t wait_q; /* for timeouts */
};
static DEFINE_MUTEX(rio500_mutex);
static struct rio_usb_data rio_instance;
static int open_rio(struct inode *inode, struct file *file)
{
struct rio_usb_data *rio = &rio_instance;
/* against disconnect() */
mutex_lock(&rio500_mutex);
if (rio->isopen || !rio->present) {
mutex_unlock(&rio500_mutex);
return -EBUSY;
}
rio->isopen = 1;
init_waitqueue_head(&rio->wait_q);
dev_info(&rio->rio_dev->dev, "Rio opened.\n");
mutex_unlock(&rio500_mutex);
return 0;
}
static int close_rio(struct inode *inode, struct file *file)
{
struct rio_usb_data *rio = &rio_instance;
/* against disconnect() */
mutex_lock(&rio500_mutex);
rio->isopen = 0;
if (!rio->present) {
/* cleanup has been delayed */
kfree(rio->ibuf);
kfree(rio->obuf);
rio->ibuf = NULL;
rio->obuf = NULL;
} else {
dev_info(&rio->rio_dev->dev, "Rio closed.\n");
}
mutex_unlock(&rio500_mutex);
return 0;
}
static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg)
{
struct RioCommand rio_cmd;
struct rio_usb_data *rio = &rio_instance;
void __user *data;
unsigned char *buffer;
int result, requesttype;
int retries;
int retval=0;
mutex_lock(&rio500_mutex);
/* Sanity check to make sure rio is connected, powered, etc */
if (rio->present == 0 || rio->rio_dev == NULL) {
retval = -ENODEV;
goto err_out;
}
switch (cmd) {
case RIO_RECV_COMMAND:
data = (void __user *) arg;
if (data == NULL)
break;
if (copy_from_user(&rio_cmd, data, sizeof(struct RioCommand))) {
retval = -EFAULT;
goto err_out;
}
if (rio_cmd.length < 0 || rio_cmd.length > PAGE_SIZE) {
retval = -EINVAL;
goto err_out;
}
buffer = (unsigned char *) __get_free_page(GFP_KERNEL);
if (buffer == NULL) {
retval = -ENOMEM;
goto err_out;
}
if (copy_from_user(buffer, rio_cmd.buffer, rio_cmd.length)) {
retval = -EFAULT;
free_page((unsigned long) buffer);
goto err_out;
}
requesttype = rio_cmd.requesttype | USB_DIR_IN |
USB_TYPE_VENDOR | USB_RECIP_DEVICE;
dev_dbg(&rio->rio_dev->dev,
"sending command:reqtype=%0x req=%0x value=%0x index=%0x len=%0x\n",
requesttype, rio_cmd.request, rio_cmd.value,
rio_cmd.index, rio_cmd.length);
/* Send rio control message */
retries = 3;
while (retries) {
result = usb_control_msg(rio->rio_dev,
usb_rcvctrlpipe(rio-> rio_dev, 0),
rio_cmd.request,
requesttype,
rio_cmd.value,
rio_cmd.index, buffer,
rio_cmd.length,
jiffies_to_msecs(rio_cmd.timeout));
if (result == -ETIMEDOUT)
retries--;
else if (result < 0) {
dev_err(&rio->rio_dev->dev,
"Error executing ioctrl. code = %d\n",
result);
retries = 0;
} else {
dev_dbg(&rio->rio_dev->dev,
"Executed ioctl. Result = %d (data=%02x)\n",
result, buffer[0]);
if (copy_to_user(rio_cmd.buffer, buffer,
rio_cmd.length)) {
free_page((unsigned long) buffer);
retval = -EFAULT;
goto err_out;
}
retries = 0;
}
/* rio_cmd.buffer contains a raw stream of single byte
data which has been returned from rio. Data is
interpreted at application level. For data that
will be cast to data types longer than 1 byte, data
will be little_endian and will potentially need to
be swapped at the app level */
}
free_page((unsigned long) buffer);
break;
case RIO_SEND_COMMAND:
data = (void __user *) arg;
if (data == NULL)
break;
if (copy_from_user(&rio_cmd, data, sizeof(struct RioCommand))) {
retval = -EFAULT;
goto err_out;
}
if (rio_cmd.length < 0 || rio_cmd.length > PAGE_SIZE) {
retval = -EINVAL;
goto err_out;
}
buffer = (unsigned char *) __get_free_page(GFP_KERNEL);
if (buffer == NULL) {
retval = -ENOMEM;
goto err_out;
}
if (copy_from_user(buffer, rio_cmd.buffer, rio_cmd.length)) {
free_page((unsigned long)buffer);
retval = -EFAULT;
goto err_out;
}
requesttype = rio_cmd.requesttype | USB_DIR_OUT |
USB_TYPE_VENDOR | USB_RECIP_DEVICE;
dev_dbg(&rio->rio_dev->dev,
"sending command: reqtype=%0x req=%0x value=%0x index=%0x len=%0x\n",
requesttype, rio_cmd.request, rio_cmd.value,
rio_cmd.index, rio_cmd.length);
/* Send rio control message */
retries = 3;
while (retries) {
result = usb_control_msg(rio->rio_dev,
usb_sndctrlpipe(rio-> rio_dev, 0),
rio_cmd.request,
requesttype,
rio_cmd.value,
rio_cmd.index, buffer,
rio_cmd.length,
jiffies_to_msecs(rio_cmd.timeout));
if (result == -ETIMEDOUT)
retries--;
else if (result < 0) {
dev_err(&rio->rio_dev->dev,
"Error executing ioctrl. code = %d\n",
result);
retries = 0;
} else {
dev_dbg(&rio->rio_dev->dev,
"Executed ioctl. Result = %d\n", result);
retries = 0;
}
}
free_page((unsigned long) buffer);
break;
default:
retval = -ENOTTY;
break;
}
err_out:
mutex_unlock(&rio500_mutex);
return retval;
}
static ssize_t
write_rio(struct file *file, const char __user *buffer,
size_t count, loff_t * ppos)
{
DEFINE_WAIT(wait);
struct rio_usb_data *rio = &rio_instance;
unsigned long copy_size;
unsigned long bytes_written = 0;
unsigned int partial;
int result = 0;
int maxretry;
int errn = 0;
int intr;
intr = mutex_lock_interruptible(&rio500_mutex);
if (intr)
return -EINTR;
/* Sanity check to make sure rio is connected, powered, etc */
if (rio->present == 0 || rio->rio_dev == NULL) {
mutex_unlock(&rio500_mutex);
return -ENODEV;
}
do {
unsigned long thistime;
char *obuf = rio->obuf;
thistime = copy_size =
(count >= OBUF_SIZE) ? OBUF_SIZE : count;
if (copy_from_user(rio->obuf, buffer, copy_size)) {
errn = -EFAULT;
goto error;
}
maxretry = 5;
while (thistime) {
if (!rio->rio_dev) {
errn = -ENODEV;
goto error;
}
if (signal_pending(current)) {
mutex_unlock(&rio500_mutex);
return bytes_written ? bytes_written : -EINTR;
}
result = usb_bulk_msg(rio->rio_dev,
usb_sndbulkpipe(rio->rio_dev, 2),
obuf, thistime, &partial, 5000);
dev_dbg(&rio->rio_dev->dev,
"write stats: result:%d thistime:%lu partial:%u\n",
result, thistime, partial);
if (result == -ETIMEDOUT) { /* NAK - so hold for a while */
if (!maxretry--) {
errn = -ETIME;
goto error;
}
prepare_to_wait(&rio->wait_q, &wait, TASK_INTERRUPTIBLE);
schedule_timeout(NAK_TIMEOUT);
finish_wait(&rio->wait_q, &wait);
continue;
} else if (!result && partial) {
obuf += partial;
thistime -= partial;
} else
break;
}
if (result) {
dev_err(&rio->rio_dev->dev, "Write Whoops - %x\n",
result);
errn = -EIO;
goto error;
}
bytes_written += copy_size;
count -= copy_size;
buffer += copy_size;
} while (count > 0);
mutex_unlock(&rio500_mutex);
return bytes_written ? bytes_written : -EIO;
error:
mutex_unlock(&rio500_mutex);
return errn;
}
static ssize_t
read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos)
{
DEFINE_WAIT(wait);
struct rio_usb_data *rio = &rio_instance;
ssize_t read_count;
unsigned int partial;
int this_read;
int result;
int maxretry = 10;
char *ibuf;
int intr;
intr = mutex_lock_interruptible(&rio500_mutex);
if (intr)
return -EINTR;
/* Sanity check to make sure rio is connected, powered, etc */
if (rio->present == 0 || rio->rio_dev == NULL) {
mutex_unlock(&rio500_mutex);
return -ENODEV;
}
ibuf = rio->ibuf;
read_count = 0;
while (count > 0) {
if (signal_pending(current)) {
mutex_unlock(&rio500_mutex);
return read_count ? read_count : -EINTR;
}
if (!rio->rio_dev) {
mutex_unlock(&rio500_mutex);
return -ENODEV;
}
this_read = (count >= IBUF_SIZE) ? IBUF_SIZE : count;
result = usb_bulk_msg(rio->rio_dev,
usb_rcvbulkpipe(rio->rio_dev, 1),
ibuf, this_read, &partial,
8000);
dev_dbg(&rio->rio_dev->dev,
"read stats: result:%d this_read:%u partial:%u\n",
result, this_read, partial);
if (partial) {
count = this_read = partial;
} else if (result == -ETIMEDOUT || result == 15) { /* FIXME: 15 ??? */
if (!maxretry--) {
mutex_unlock(&rio500_mutex);
dev_err(&rio->rio_dev->dev,
"read_rio: maxretry timeout\n");
return -ETIME;
}
prepare_to_wait(&rio->wait_q, &wait, TASK_INTERRUPTIBLE);
schedule_timeout(NAK_TIMEOUT);
finish_wait(&rio->wait_q, &wait);
continue;
} else if (result != -EREMOTEIO) {
mutex_unlock(&rio500_mutex);
dev_err(&rio->rio_dev->dev,
"Read Whoops - result:%d partial:%u this_read:%u\n",
result, partial, this_read);
return -EIO;
} else {
mutex_unlock(&rio500_mutex);
return (0);
}
if (this_read) {
if (copy_to_user(buffer, ibuf, this_read)) {
mutex_unlock(&rio500_mutex);
return -EFAULT;
}
count -= this_read;
read_count += this_read;
buffer += this_read;
}
}
mutex_unlock(&rio500_mutex);
return read_count;
}
static const struct file_operations usb_rio_fops = {
.owner = THIS_MODULE,
.read = read_rio,
.write = write_rio,
.unlocked_ioctl = ioctl_rio,
.open = open_rio,
.release = close_rio,
.llseek = noop_llseek,
};
static struct usb_class_driver usb_rio_class = {
.name = "rio500%d",
.fops = &usb_rio_fops,
.minor_base = RIO_MINOR,
};
static int probe_rio(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_device *dev = interface_to_usbdev(intf);
struct rio_usb_data *rio = &rio_instance;
int retval = -ENOMEM;
char *ibuf, *obuf;
if (rio->present) {
dev_info(&intf->dev, "Second USB Rio at address %d refused\n", dev->devnum);
return -EBUSY;
}
dev_info(&intf->dev, "USB Rio found at address %d\n", dev->devnum);
obuf = kmalloc(OBUF_SIZE, GFP_KERNEL);
if (!obuf) {
dev_err(&dev->dev,
"probe_rio: Not enough memory for the output buffer\n");
goto err_obuf;
}
dev_dbg(&intf->dev, "obuf address: %p\n", obuf);
ibuf = kmalloc(IBUF_SIZE, GFP_KERNEL);
if (!ibuf) {
dev_err(&dev->dev,
"probe_rio: Not enough memory for the input buffer\n");
goto err_ibuf;
}
dev_dbg(&intf->dev, "ibuf address: %p\n", ibuf);
mutex_lock(&rio500_mutex);
rio->rio_dev = dev;
rio->ibuf = ibuf;
rio->obuf = obuf;
rio->present = 1;
mutex_unlock(&rio500_mutex);
retval = usb_register_dev(intf, &usb_rio_class);
if (retval) {
dev_err(&dev->dev,
"Not able to get a minor for this device.\n");
goto err_register;
}
usb_set_intfdata(intf, rio);
return retval;
err_register:
mutex_lock(&rio500_mutex);
rio->present = 0;
mutex_unlock(&rio500_mutex);
err_ibuf:
kfree(obuf);
err_obuf:
return retval;
}
static void disconnect_rio(struct usb_interface *intf)
{
struct rio_usb_data *rio = usb_get_intfdata (intf);
usb_set_intfdata (intf, NULL);
if (rio) {
usb_deregister_dev(intf, &usb_rio_class);
mutex_lock(&rio500_mutex);
if (rio->isopen) {
rio->isopen = 0;
/* better let it finish - the release will do whats needed */
rio->rio_dev = NULL;
mutex_unlock(&rio500_mutex);
return;
}
kfree(rio->ibuf);
kfree(rio->obuf);
dev_info(&intf->dev, "USB Rio disconnected.\n");
rio->present = 0;
mutex_unlock(&rio500_mutex);
}
}
static const struct usb_device_id rio_table[] = {
{ USB_DEVICE(0x0841, 1) }, /* Rio 500 */
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, rio_table);
static struct usb_driver rio_driver = {
.name = "rio500",
.probe = probe_rio,
.disconnect = disconnect_rio,
.id_table = rio_table,
};
module_usb_driver(rio_driver);
MODULE_AUTHOR( DRIVER_AUTHOR );
MODULE_DESCRIPTION( DRIVER_DESC );
MODULE_LICENSE("GPL");

20
drivers/usb/misc/rio500_usb.h
View File

@ -1,20 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/* ----------------------------------------------------------------------
Copyright (C) 2000 Cesar Miquel (miquel@df.uba.ar)
---------------------------------------------------------------------- */
#define RIO_SEND_COMMAND 0x1
#define RIO_RECV_COMMAND 0x2
#define RIO_DIR_OUT 0x0
#define RIO_DIR_IN 0x1
struct RioCommand {
short length;
int request;
int requesttype;
int value;
int index;
void __user *buffer;
int timeout;
};