leandrof/linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
f7fbcf4637fe8f54acb18d88488ae901b3d7a4dc
linux/tools/testing/selftests/wireguard/qemu/Makefile

445 lines
18 KiB
Makefile
Raw Normal View History

wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
# SPDX-License-Identifier: GPL-2.0
#
# Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
PWD := $(shell pwd)
# Set these from the environment to override
KERNEL_PATH ?= $(PWD)/../../../../..
BUILD_PATH ?= $(PWD)/build/$(ARCH)
DISTFILES_PATH ?= $(PWD)/distfiles
NR_CPUS ?= 4
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
ARCH ?=
CBUILD := $(shell gcc -dumpmachine)
HOST_ARCH := $(firstword $(subst -, ,$(CBUILD)))
ifeq ($(ARCH),)
ARCH := $(HOST_ARCH)
endif
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
MIRROR := https://download.wireguard.com/qemu-test/distfiles/
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
KERNEL_BUILD_PATH := $(BUILD_PATH)/kernel$(if $(findstring yes,$(DEBUG_KERNEL)),-debug)
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
default: qemu
# variable name, tarball project name, version, tarball extension, default URI base
define tar_download =
$(1)_VERSION := $(3)
$(1)_NAME := $(2)-$$($(1)_VERSION)
$(1)_TAR := $(DISTFILES_PATH)/$$($(1)_NAME)$(4)
$(1)_PATH := $(BUILD_PATH)/$$($(1)_NAME)
$(call file_download,$$($(1)_NAME)$(4),$(5),$(6))
endef
define file_download =
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
$(DISTFILES_PATH)/$(1): | $(4)
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
mkdir -p $(DISTFILES_PATH)
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
flock -x $$@.lock -c '[ -f $$@ ] && exit 0; wget -O $$@.tmp $(MIRROR)$(1) || wget -O $$@.tmp $(2)$(1) || rm -f $$@.tmp; [ -f $$@.tmp ] || exit 1; if ([ -n "$(4)" ] && sed -n "s#^\([a-f0-9]\{64\}\) \($(1)\)\$$$$#\1 $(DISTFILES_PATH)/\2.tmp#p" "$(4)" || echo "$(3) $$@.tmp") | sha256sum -c -; then mv $$@.tmp $$@; else rm -f $$@.tmp; exit 71; fi'
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
endef
wireguard: selftests: bump package deps Use newer, more reliable package dependencies. These should hopefully reduce flakes. However, we keep the old iputils package, as it accumulated bugs after resulting in flakes on slow machines. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:19 +02:00
$(eval $(call tar_download,IPERF,iperf,3.11,.tar.gz,https://downloads.es.net/pub/iperf/,de8cb409fad61a0574f4cb07eb19ce1159707403ac2dc01b5d175e91240b7e5f))
$(eval $(call tar_download,BASH,bash,5.1.16,.tar.gz,https://ftp.gnu.org/gnu/bash/,5bac17218d3911834520dad13cd1f85ab944e1c09ae1aba55906be1f8192f558))
$(eval $(call tar_download,IPROUTE2,iproute2,5.17.0,.tar.gz,https://www.kernel.org/pub/linux/utils/net/iproute2/,bda331d5c4606138892f23a565d78fca18919b4d508a0b7ca8391c2da2db68b9))
$(eval $(call tar_download,IPTABLES,iptables,1.8.7,.tar.bz2,https://www.netfilter.org/projects/iptables/files/,c109c96bb04998cd44156622d36f8e04b140701ec60531a10668cfdff5e8d8f0))
$(eval $(call tar_download,NMAP,nmap,7.92,.tgz,https://nmap.org/dist/,064183ea642dc4c12b1ab3b5358ce1cef7d2e7e11ffa2849f16d339f5b717117))
wireguard: selftests: remove ancient kernel compatibility code Quite a bit of the test suite was designed to work with ancient kernels. Thankfully we no longer have to deal with this. This commit updates things that we can finally update and removes things that we can finally remove, to avoid the build-up of the last several years as a result of having to support ancient kernels. We can finally rely on suppress_ prefixlength being available. On the build side of things, the no-PIE hack is no longer required, and we can bump some of the tools, repair our m68k and i686-kvm support, and get better coverage of the static branches used in the crypto lib and in udp_tunnel. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02 17:47:49 +01:00
$(eval $(call tar_download,IPUTILS,iputils,s20190709,.tar.gz,https://github.com/iputils/iputils/archive/s20190709.tar.gz/#,a15720dd741d7538dd2645f9f516d193636ae4300ff7dbc8bfca757bf166490a))
wireguard: selftests: bump package deps Use newer, more reliable package dependencies. These should hopefully reduce flakes. However, we keep the old iputils package, as it accumulated bugs after resulting in flakes on slow machines. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:19 +02:00
$(eval $(call tar_download,WIREGUARD_TOOLS,wireguard-tools,1.0.20210914,.tar.xz,https://git.zx2c4.com/wireguard-tools/snapshot/,97ff31489217bb265b7ae850d3d0f335ab07d2652ba1feec88b734bc96bd05ac))
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
export CFLAGS := -O3 -pipe
wireguard: selftests: remove ancient kernel compatibility code Quite a bit of the test suite was designed to work with ancient kernels. Thankfully we no longer have to deal with this. This commit updates things that we can finally update and removes things that we can finally remove, to avoid the build-up of the last several years as a result of having to support ancient kernels. We can finally rely on suppress_ prefixlength being available. On the build side of things, the no-PIE hack is no longer required, and we can bump some of the tools, repair our m68k and i686-kvm support, and get better coverage of the static branches used in the crypto lib and in udp_tunnel. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02 17:47:49 +01:00
ifeq ($(HOST_ARCH),$(ARCH))
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
CFLAGS += -march=native
endif
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
export LDFLAGS :=
export CPPFLAGS :=
QEMU_VPORT_RESULT :=
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
ifeq ($(ARCH),aarch64)
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
CHOST := aarch64-linux-musl
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
QEMU_ARCH := aarch64
KERNEL_ARCH := arm64
KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/arm64/boot/Image
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
QEMU_VPORT_RESULT := virtio-serial-device
wireguard: selftests: remove ancient kernel compatibility code Quite a bit of the test suite was designed to work with ancient kernels. Thankfully we no longer have to deal with this. This commit updates things that we can finally update and removes things that we can finally remove, to avoid the build-up of the last several years as a result of having to support ancient kernels. We can finally rely on suppress_ prefixlength being available. On the build side of things, the no-PIE hack is no longer required, and we can bump some of the tools, repair our m68k and i686-kvm support, and get better coverage of the static branches used in the crypto lib and in udp_tunnel. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02 17:47:49 +01:00
ifeq ($(HOST_ARCH),$(ARCH))
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
QEMU_MACHINE := -cpu host -machine virt,gic_version=host,accel=kvm
else
wireguard: selftests: use maximum cpu features and allow rng seeding By forcing the maximum CPU that QEMU has available, we expose additional capabilities, such as the RNDR instruction, which increases test coverage. This then allows the CI to skip the fake seeding step in some cases. Also enable STRICT_KERNEL_RWX to catch issues related to early jump labels when the RNG is initialized at boot. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-06-10 16:32:02 +02:00
QEMU_MACHINE := -cpu max -machine virt
CFLAGS += -march=armv8-a
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
endif
else ifeq ($(ARCH),aarch64_be)
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
CHOST := aarch64_be-linux-musl
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
QEMU_ARCH := aarch64
KERNEL_ARCH := arm64
KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/arm64/boot/Image
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
QEMU_VPORT_RESULT := virtio-serial-device
wireguard: selftests: remove ancient kernel compatibility code Quite a bit of the test suite was designed to work with ancient kernels. Thankfully we no longer have to deal with this. This commit updates things that we can finally update and removes things that we can finally remove, to avoid the build-up of the last several years as a result of having to support ancient kernels. We can finally rely on suppress_ prefixlength being available. On the build side of things, the no-PIE hack is no longer required, and we can bump some of the tools, repair our m68k and i686-kvm support, and get better coverage of the static branches used in the crypto lib and in udp_tunnel. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02 17:47:49 +01:00
ifeq ($(HOST_ARCH),$(ARCH))
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
QEMU_MACHINE := -cpu host -machine virt,gic_version=host,accel=kvm
else
wireguard: selftests: use maximum cpu features and allow rng seeding By forcing the maximum CPU that QEMU has available, we expose additional capabilities, such as the RNDR instruction, which increases test coverage. This then allows the CI to skip the fake seeding step in some cases. Also enable STRICT_KERNEL_RWX to catch issues related to early jump labels when the RNG is initialized at boot. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-06-10 16:32:02 +02:00
QEMU_MACHINE := -cpu max -machine virt
CFLAGS += -march=armv8-a
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
endif
else ifeq ($(ARCH),arm)
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
CHOST := arm-linux-musleabi
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
QEMU_ARCH := arm
KERNEL_ARCH := arm
KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/arm/boot/zImage
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
QEMU_VPORT_RESULT := virtio-serial-device
wireguard: selftests: remove ancient kernel compatibility code Quite a bit of the test suite was designed to work with ancient kernels. Thankfully we no longer have to deal with this. This commit updates things that we can finally update and removes things that we can finally remove, to avoid the build-up of the last several years as a result of having to support ancient kernels. We can finally rely on suppress_ prefixlength being available. On the build side of things, the no-PIE hack is no longer required, and we can bump some of the tools, repair our m68k and i686-kvm support, and get better coverage of the static branches used in the crypto lib and in udp_tunnel. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02 17:47:49 +01:00
ifeq ($(HOST_ARCH),$(ARCH))
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
QEMU_MACHINE := -cpu host -machine virt,gic_version=host,accel=kvm
else
wireguard: selftests: use maximum cpu features and allow rng seeding By forcing the maximum CPU that QEMU has available, we expose additional capabilities, such as the RNDR instruction, which increases test coverage. This then allows the CI to skip the fake seeding step in some cases. Also enable STRICT_KERNEL_RWX to catch issues related to early jump labels when the RNG is initialized at boot. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-06-10 16:32:02 +02:00
QEMU_MACHINE := -cpu max -machine virt
CFLAGS += -march=armv7-a -mabi=aapcs-linux
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
endif
else ifeq ($(ARCH),armeb)
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
CHOST := armeb-linux-musleabi
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
QEMU_ARCH := arm
KERNEL_ARCH := arm
KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/arm/boot/zImage
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
QEMU_VPORT_RESULT := virtio-serial-device
wireguard: selftests: remove ancient kernel compatibility code Quite a bit of the test suite was designed to work with ancient kernels. Thankfully we no longer have to deal with this. This commit updates things that we can finally update and removes things that we can finally remove, to avoid the build-up of the last several years as a result of having to support ancient kernels. We can finally rely on suppress_ prefixlength being available. On the build side of things, the no-PIE hack is no longer required, and we can bump some of the tools, repair our m68k and i686-kvm support, and get better coverage of the static branches used in the crypto lib and in udp_tunnel. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02 17:47:49 +01:00
ifeq ($(HOST_ARCH),$(ARCH))
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
QEMU_MACHINE := -cpu host -machine virt,gic_version=host,accel=kvm
else
wireguard: selftests: use maximum cpu features and allow rng seeding By forcing the maximum CPU that QEMU has available, we expose additional capabilities, such as the RNDR instruction, which increases test coverage. This then allows the CI to skip the fake seeding step in some cases. Also enable STRICT_KERNEL_RWX to catch issues related to early jump labels when the RNG is initialized at boot. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-06-10 16:32:02 +02:00
QEMU_MACHINE := -cpu max -machine virt
CFLAGS += -march=armv7-a -mabi=aapcs-linux
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
LDFLAGS += -Wl,--be8
endif
else ifeq ($(ARCH),x86_64)
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
CHOST := x86_64-linux-musl
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
QEMU_ARCH := x86_64
KERNEL_ARCH := x86_64
KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/x86/boot/bzImage
wireguard: selftests: use microvm on x86 This makes for faster tests, faster compile time, and allows us to ditch ACPI finally. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-07 02:31:55 +02:00
QEMU_VPORT_RESULT := virtio-serial-device
wireguard: selftests: remove ancient kernel compatibility code Quite a bit of the test suite was designed to work with ancient kernels. Thankfully we no longer have to deal with this. This commit updates things that we can finally update and removes things that we can finally remove, to avoid the build-up of the last several years as a result of having to support ancient kernels. We can finally rely on suppress_ prefixlength being available. On the build side of things, the no-PIE hack is no longer required, and we can bump some of the tools, repair our m68k and i686-kvm support, and get better coverage of the static branches used in the crypto lib and in udp_tunnel. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02 17:47:49 +01:00
ifeq ($(HOST_ARCH),$(ARCH))
wireguard: selftests: use microvm on x86 This makes for faster tests, faster compile time, and allows us to ditch ACPI finally. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-07 02:31:55 +02:00
QEMU_MACHINE := -cpu host -machine microvm,accel=kvm,pit=off,pic=off,rtc=off -no-acpi
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
else
wireguard: selftests: use microvm on x86 This makes for faster tests, faster compile time, and allows us to ditch ACPI finally. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-07 02:31:55 +02:00
QEMU_MACHINE := -cpu max -machine microvm -no-acpi
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
endif
else ifeq ($(ARCH),i686)
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
CHOST := i686-linux-musl
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
QEMU_ARCH := i386
KERNEL_ARCH := x86
KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/x86/boot/bzImage
wireguard: selftests: use microvm on x86 This makes for faster tests, faster compile time, and allows us to ditch ACPI finally. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-07 02:31:55 +02:00
QEMU_VPORT_RESULT := virtio-serial-device
wireguard: selftests: remove ancient kernel compatibility code Quite a bit of the test suite was designed to work with ancient kernels. Thankfully we no longer have to deal with this. This commit updates things that we can finally update and removes things that we can finally remove, to avoid the build-up of the last several years as a result of having to support ancient kernels. We can finally rely on suppress_ prefixlength being available. On the build side of things, the no-PIE hack is no longer required, and we can bump some of the tools, repair our m68k and i686-kvm support, and get better coverage of the static branches used in the crypto lib and in udp_tunnel. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02 17:47:49 +01:00
ifeq ($(subst x86_64,i686,$(HOST_ARCH)),$(ARCH))
wireguard: selftests: use microvm on x86 This makes for faster tests, faster compile time, and allows us to ditch ACPI finally. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-07 02:31:55 +02:00
QEMU_MACHINE := -cpu host -machine microvm,accel=kvm,pit=off,pic=off,rtc=off -no-acpi
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
else
wireguard: selftests: use microvm on x86 This makes for faster tests, faster compile time, and allows us to ditch ACPI finally. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-07 02:31:55 +02:00
QEMU_MACHINE := -cpu coreduo -machine microvm -no-acpi
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
endif
else ifeq ($(ARCH),mips64)
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
CHOST := mips64-linux-musl
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
QEMU_ARCH := mips64
KERNEL_ARCH := mips
KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
wireguard: selftests: remove ancient kernel compatibility code Quite a bit of the test suite was designed to work with ancient kernels. Thankfully we no longer have to deal with this. This commit updates things that we can finally update and removes things that we can finally remove, to avoid the build-up of the last several years as a result of having to support ancient kernels. We can finally rely on suppress_ prefixlength being available. On the build side of things, the no-PIE hack is no longer required, and we can bump some of the tools, repair our m68k and i686-kvm support, and get better coverage of the static branches used in the crypto lib and in udp_tunnel. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02 17:47:49 +01:00
ifeq ($(HOST_ARCH),$(ARCH))
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
QEMU_MACHINE := -cpu host -machine malta,accel=kvm
CFLAGS += -EB
else
QEMU_MACHINE := -cpu MIPS64R2-generic -machine malta -smp 1
CFLAGS += -march=mips64r2 -EB
endif
else ifeq ($(ARCH),mips64el)
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
CHOST := mips64el-linux-musl
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
QEMU_ARCH := mips64el
KERNEL_ARCH := mips
KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
wireguard: selftests: remove ancient kernel compatibility code Quite a bit of the test suite was designed to work with ancient kernels. Thankfully we no longer have to deal with this. This commit updates things that we can finally update and removes things that we can finally remove, to avoid the build-up of the last several years as a result of having to support ancient kernels. We can finally rely on suppress_ prefixlength being available. On the build side of things, the no-PIE hack is no longer required, and we can bump some of the tools, repair our m68k and i686-kvm support, and get better coverage of the static branches used in the crypto lib and in udp_tunnel. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02 17:47:49 +01:00
ifeq ($(HOST_ARCH),$(ARCH))
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
QEMU_MACHINE := -cpu host -machine malta,accel=kvm
CFLAGS += -EL
else
QEMU_MACHINE := -cpu MIPS64R2-generic -machine malta -smp 1
CFLAGS += -march=mips64r2 -EL
endif
else ifeq ($(ARCH),mips)
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
CHOST := mips-linux-musl
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
QEMU_ARCH := mips
KERNEL_ARCH := mips
KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
wireguard: selftests: remove ancient kernel compatibility code Quite a bit of the test suite was designed to work with ancient kernels. Thankfully we no longer have to deal with this. This commit updates things that we can finally update and removes things that we can finally remove, to avoid the build-up of the last several years as a result of having to support ancient kernels. We can finally rely on suppress_ prefixlength being available. On the build side of things, the no-PIE hack is no longer required, and we can bump some of the tools, repair our m68k and i686-kvm support, and get better coverage of the static branches used in the crypto lib and in udp_tunnel. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02 17:47:49 +01:00
ifeq ($(HOST_ARCH),$(ARCH))
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
QEMU_MACHINE := -cpu host -machine malta,accel=kvm
CFLAGS += -EB
else
QEMU_MACHINE := -cpu 24Kf -machine malta -smp 1
CFLAGS += -march=mips32r2 -EB
endif
else ifeq ($(ARCH),mipsel)
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
CHOST := mipsel-linux-musl
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
QEMU_ARCH := mipsel
KERNEL_ARCH := mips
KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
wireguard: selftests: remove ancient kernel compatibility code Quite a bit of the test suite was designed to work with ancient kernels. Thankfully we no longer have to deal with this. This commit updates things that we can finally update and removes things that we can finally remove, to avoid the build-up of the last several years as a result of having to support ancient kernels. We can finally rely on suppress_ prefixlength being available. On the build side of things, the no-PIE hack is no longer required, and we can bump some of the tools, repair our m68k and i686-kvm support, and get better coverage of the static branches used in the crypto lib and in udp_tunnel. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02 17:47:49 +01:00
ifeq ($(HOST_ARCH),$(ARCH))
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
QEMU_MACHINE := -cpu host -machine malta,accel=kvm
CFLAGS += -EL
else
QEMU_MACHINE := -cpu 24Kf -machine malta -smp 1
CFLAGS += -march=mips32r2 -EL
endif
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
else ifeq ($(ARCH),powerpc64)
CHOST := powerpc64-linux-musl
QEMU_ARCH := ppc64
KERNEL_ARCH := powerpc
KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
ifeq ($(HOST_ARCH),$(ARCH))
QEMU_MACHINE := -cpu host,accel=kvm -machine pseries
else
wireguard: selftests: use maximum cpu features and allow rng seeding By forcing the maximum CPU that QEMU has available, we expose additional capabilities, such as the RNDR instruction, which increases test coverage. This then allows the CI to skip the fake seeding step in some cases. Also enable STRICT_KERNEL_RWX to catch issues related to early jump labels when the RNG is initialized at boot. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-06-10 16:32:02 +02:00
QEMU_MACHINE := -machine pseries -device spapr-rng,rng=rng -object rng-random,id=rng
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
endif
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
else ifeq ($(ARCH),powerpc64le)
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
CHOST := powerpc64le-linux-musl
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
QEMU_ARCH := ppc64
KERNEL_ARCH := powerpc
KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
wireguard: selftests: remove ancient kernel compatibility code Quite a bit of the test suite was designed to work with ancient kernels. Thankfully we no longer have to deal with this. This commit updates things that we can finally update and removes things that we can finally remove, to avoid the build-up of the last several years as a result of having to support ancient kernels. We can finally rely on suppress_ prefixlength being available. On the build side of things, the no-PIE hack is no longer required, and we can bump some of the tools, repair our m68k and i686-kvm support, and get better coverage of the static branches used in the crypto lib and in udp_tunnel. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02 17:47:49 +01:00
ifeq ($(HOST_ARCH),$(ARCH))
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
QEMU_MACHINE := -cpu host,accel=kvm -machine pseries
else
wireguard: selftests: use maximum cpu features and allow rng seeding By forcing the maximum CPU that QEMU has available, we expose additional capabilities, such as the RNDR instruction, which increases test coverage. This then allows the CI to skip the fake seeding step in some cases. Also enable STRICT_KERNEL_RWX to catch issues related to early jump labels when the RNG is initialized at boot. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-06-10 16:32:02 +02:00
QEMU_MACHINE := -machine pseries -device spapr-rng,rng=rng -object rng-random,id=rng
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
endif
else ifeq ($(ARCH),powerpc)
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
CHOST := powerpc-linux-musl
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
QEMU_ARCH := ppc
KERNEL_ARCH := powerpc
KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/powerpc/boot/uImage
wireguard: selftests: remove ancient kernel compatibility code Quite a bit of the test suite was designed to work with ancient kernels. Thankfully we no longer have to deal with this. This commit updates things that we can finally update and removes things that we can finally remove, to avoid the build-up of the last several years as a result of having to support ancient kernels. We can finally rely on suppress_ prefixlength being available. On the build side of things, the no-PIE hack is no longer required, and we can bump some of the tools, repair our m68k and i686-kvm support, and get better coverage of the static branches used in the crypto lib and in udp_tunnel. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02 17:47:49 +01:00
ifeq ($(HOST_ARCH),$(ARCH))
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
QEMU_MACHINE := -cpu host,accel=kvm -machine ppce500
else
QEMU_MACHINE := -machine ppce500
endif
else ifeq ($(ARCH),m68k)
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
CHOST := m68k-linux-musl
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
QEMU_ARCH := m68k
KERNEL_ARCH := m68k
KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
wireguard: selftests: remove ancient kernel compatibility code Quite a bit of the test suite was designed to work with ancient kernels. Thankfully we no longer have to deal with this. This commit updates things that we can finally update and removes things that we can finally remove, to avoid the build-up of the last several years as a result of having to support ancient kernels. We can finally rely on suppress_ prefixlength being available. On the build side of things, the no-PIE hack is no longer required, and we can bump some of the tools, repair our m68k and i686-kvm support, and get better coverage of the static branches used in the crypto lib and in udp_tunnel. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02 17:47:49 +01:00
KERNEL_CMDLINE := $(shell sed -n 's/CONFIG_CMDLINE=\(.*\)/\1/p' arch/m68k.config)
wireguard: selftests: use virt machine on m68k This should be a bit more stable hopefully. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-07 02:31:53 +02:00
QEMU_VPORT_RESULT := virtio-serial-device
wireguard: selftests: remove ancient kernel compatibility code Quite a bit of the test suite was designed to work with ancient kernels. Thankfully we no longer have to deal with this. This commit updates things that we can finally update and removes things that we can finally remove, to avoid the build-up of the last several years as a result of having to support ancient kernels. We can finally rely on suppress_ prefixlength being available. On the build side of things, the no-PIE hack is no longer required, and we can bump some of the tools, repair our m68k and i686-kvm support, and get better coverage of the static branches used in the crypto lib and in udp_tunnel. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02 17:47:49 +01:00
ifeq ($(HOST_ARCH),$(ARCH))
wireguard: selftests: use virt machine on m68k This should be a bit more stable hopefully. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-07 02:31:53 +02:00
QEMU_MACHINE := -cpu host,accel=kvm -machine virt -append $(KERNEL_CMDLINE)
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
else
wireguard: selftests: use virt machine on m68k This should be a bit more stable hopefully. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-07 02:31:53 +02:00
QEMU_MACHINE := -machine virt -smp 1 -append $(KERNEL_CMDLINE)
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
endif
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
else ifeq ($(ARCH),riscv64)
CHOST := riscv64-linux-musl
QEMU_ARCH := riscv64
KERNEL_ARCH := riscv
KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/riscv/boot/Image
QEMU_VPORT_RESULT := virtio-serial-device
ifeq ($(HOST_ARCH),$(ARCH))
QEMU_MACHINE := -cpu host,accel=kvm -machine virt
else
QEMU_MACHINE := -cpu rv64 -machine virt
endif
else ifeq ($(ARCH),riscv32)
CHOST := riscv32-linux-musl
QEMU_ARCH := riscv32
KERNEL_ARCH := riscv
KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/riscv/boot/Image
QEMU_VPORT_RESULT := virtio-serial-device
ifeq ($(HOST_ARCH),$(ARCH))
QEMU_MACHINE := -cpu host,accel=kvm -machine virt
else
QEMU_MACHINE := -cpu rv32 -machine virt
endif
else ifeq ($(ARCH),s390x)
CHOST := s390x-linux-musl
QEMU_ARCH := s390x
KERNEL_ARCH := s390
KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/s390/boot/bzImage
KERNEL_CMDLINE := $(shell sed -n 's/CONFIG_CMDLINE=\(.*\)/\1/p' arch/s390x.config)
QEMU_VPORT_RESULT := virtio-serial-ccw
ifeq ($(HOST_ARCH),$(ARCH))
QEMU_MACHINE := -cpu host,accel=kvm -machine s390-ccw-virtio -append $(KERNEL_CMDLINE)
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
else
wireguard: selftests: use maximum cpu features and allow rng seeding By forcing the maximum CPU that QEMU has available, we expose additional capabilities, such as the RNDR instruction, which increases test coverage. This then allows the CI to skip the fake seeding step in some cases. Also enable STRICT_KERNEL_RWX to catch issues related to early jump labels when the RNG is initialized at boot. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-06-10 16:32:02 +02:00
QEMU_MACHINE := -cpu max -machine s390-ccw-virtio -append $(KERNEL_CMDLINE)
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
endif
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
else
$(error I only build: x86_64, i686, arm, armeb, aarch64, aarch64_be, mips, mipsel, mips64, mips64el, powerpc64, powerpc64le, powerpc, m68k, riscv64, riscv32, s390x)
endif
TOOLCHAIN_FILENAME := $(CHOST)-cross.tgz
TOOLCHAIN_TAR := $(DISTFILES_PATH)/$(TOOLCHAIN_FILENAME)
TOOLCHAIN_PATH := $(BUILD_PATH)/$(CHOST)-cross
TOOLCHAIN_DIR := https://download.wireguard.com/qemu-test/toolchains/20211123/
$(eval $(call file_download,toolchain-sha256sums-20211123,$(TOOLCHAIN_DIR)SHA256SUMS#,83da033fd8c798df476c21d9612da2dfb896ec62fbed4ceec5eefc0e56b3f0c8))
$(eval $(call file_download,$(TOOLCHAIN_FILENAME),$(TOOLCHAIN_DIR),,$(DISTFILES_PATH)/toolchain-sha256sums-20211123))
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
STRIP := $(CHOST)-strip
CROSS_COMPILE_FLAG := --build=$(CBUILD) --host=$(CHOST)
$(info Building for $(CHOST) using $(CBUILD))
export CROSS_COMPILE := $(CHOST)-
export PATH := $(TOOLCHAIN_PATH)/bin:$(PATH)
export CC := $(CHOST)-gcc
wireguard: selftests: restore support for ccache When moving to non-system toolchains, we inadvertantly killed the ability to use ccache. So instead, build ccache support into the test harness directly. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:18 +02:00
CCACHE_PATH := $(shell which ccache 2>/dev/null)
ifneq ($(CCACHE_PATH),)
export KBUILD_BUILD_TIMESTAMP := Fri Jun 5 15:58:00 CEST 2015
export PATH := $(TOOLCHAIN_PATH)/bin/ccache:$(PATH)
export CCACHE_SLOPPINESS := file_macro,time_macros
export CCACHE_DIR ?= $(PWD)/ccache
endif
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
USERSPACE_DEPS := $(TOOLCHAIN_PATH)/.installed $(TOOLCHAIN_PATH)/$(CHOST)/include/linux/.installed
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
comma := ,
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
build: $(KERNEL_BZIMAGE)
qemu: $(KERNEL_BZIMAGE)
rm -f $(BUILD_PATH)/result
timeout --foreground 20m qemu-system-$(QEMU_ARCH) \
-nodefaults \
-nographic \
-smp $(NR_CPUS) \
$(QEMU_MACHINE) \
-m $$(grep -q CONFIG_DEBUG_KMEMLEAK=y $(KERNEL_BUILD_PATH)/.config && echo 1G || echo 256M) \
-serial stdio \
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
-chardev file,path=$(BUILD_PATH)/result,id=result \
$(if $(QEMU_VPORT_RESULT),-device $(QEMU_VPORT_RESULT) -device virtserialport$(comma)chardev=result,-serial chardev:result) \
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
-no-reboot \
-monitor none \
-kernel $<
grep -Fq success $(BUILD_PATH)/result
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
$(BUILD_PATH)/init-cpio-spec.txt: $(TOOLCHAIN_PATH)/.installed $(BUILD_PATH)/init
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
mkdir -p $(BUILD_PATH)
echo "file /init $(BUILD_PATH)/init 755 0 0" > $@
echo "file /init.sh $(PWD)/../netns.sh 755 0 0" >> $@
echo "dir /dev 755 0 0" >> $@
echo "nod /dev/console 644 0 0 c 5 1" >> $@
echo "dir /bin 755 0 0" >> $@
echo "file /bin/iperf3 $(IPERF_PATH)/src/iperf3 755 0 0" >> $@
wireguard: selftests: remove ancient kernel compatibility code Quite a bit of the test suite was designed to work with ancient kernels. Thankfully we no longer have to deal with this. This commit updates things that we can finally update and removes things that we can finally remove, to avoid the build-up of the last several years as a result of having to support ancient kernels. We can finally rely on suppress_ prefixlength being available. On the build side of things, the no-PIE hack is no longer required, and we can bump some of the tools, repair our m68k and i686-kvm support, and get better coverage of the static branches used in the crypto lib and in udp_tunnel. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02 17:47:49 +01:00
echo "file /bin/wg $(WIREGUARD_TOOLS_PATH)/src/wg 755 0 0" >> $@
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
echo "file /bin/bash $(BASH_PATH)/bash 755 0 0" >> $@
echo "file /bin/ip $(IPROUTE2_PATH)/ip/ip 755 0 0" >> $@
echo "file /bin/ss $(IPROUTE2_PATH)/misc/ss 755 0 0" >> $@
echo "file /bin/ping $(IPUTILS_PATH)/ping 755 0 0" >> $@
echo "file /bin/ncat $(NMAP_PATH)/ncat/ncat 755 0 0" >> $@
wireguard: selftests: remove ancient kernel compatibility code Quite a bit of the test suite was designed to work with ancient kernels. Thankfully we no longer have to deal with this. This commit updates things that we can finally update and removes things that we can finally remove, to avoid the build-up of the last several years as a result of having to support ancient kernels. We can finally rely on suppress_ prefixlength being available. On the build side of things, the no-PIE hack is no longer required, and we can bump some of the tools, repair our m68k and i686-kvm support, and get better coverage of the static branches used in the crypto lib and in udp_tunnel. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02 17:47:49 +01:00
echo "file /bin/xtables-legacy-multi $(IPTABLES_PATH)/iptables/xtables-legacy-multi 755 0 0" >> $@
echo "slink /bin/iptables xtables-legacy-multi 777 0 0" >> $@
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
echo "slink /bin/ping6 ping 777 0 0" >> $@
echo "dir /lib 755 0 0" >> $@
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
echo "file /lib/libc.so $(TOOLCHAIN_PATH)/$(CHOST)/lib/libc.so 755 0 0" >> $@
echo "slink $$($(CHOST)-readelf -p .interp '$(BUILD_PATH)/init'| grep -o '/lib/.*') libc.so 777 0 0" >> $@
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
$(KERNEL_BUILD_PATH)/.config: $(TOOLCHAIN_PATH)/.installed kernel.config arch/$(ARCH).config
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
mkdir -p $(KERNEL_BUILD_PATH)
cp kernel.config $(KERNEL_BUILD_PATH)/minimal.config
printf 'CONFIG_NR_CPUS=$(NR_CPUS)\nCONFIG_INITRAMFS_SOURCE="$(BUILD_PATH)/init-cpio-spec.txt"\n' >> $(KERNEL_BUILD_PATH)/minimal.config
cat arch/$(ARCH).config >> $(KERNEL_BUILD_PATH)/minimal.config
$(MAKE) -C $(KERNEL_PATH) O=$(KERNEL_BUILD_PATH) ARCH=$(KERNEL_ARCH) allnoconfig
cd $(KERNEL_BUILD_PATH) && ARCH=$(KERNEL_ARCH) $(KERNEL_PATH)/scripts/kconfig/merge_config.sh -n $(KERNEL_BUILD_PATH)/.config $(KERNEL_BUILD_PATH)/minimal.config
$(if $(findstring yes,$(DEBUG_KERNEL)),cp debug.config $(KERNEL_BUILD_PATH) && cd $(KERNEL_BUILD_PATH) && ARCH=$(KERNEL_ARCH) $(KERNEL_PATH)/scripts/kconfig/merge_config.sh -n $(KERNEL_BUILD_PATH)/.config debug.config,)
wireguard: selftests: always call kernel makefile These selftests are used for much more extensive changes than just the wireguard source files. So always call the kernel's build file, which will do something or nothing after checking the whole tree, per usual. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-07 02:31:54 +02:00
$(KERNEL_BZIMAGE): $(TOOLCHAIN_PATH)/.installed $(KERNEL_BUILD_PATH)/.config $(BUILD_PATH)/init-cpio-spec.txt $(IPERF_PATH)/src/iperf3 $(IPUTILS_PATH)/ping $(BASH_PATH)/bash $(IPROUTE2_PATH)/misc/ss $(IPROUTE2_PATH)/ip/ip $(IPTABLES_PATH)/iptables/xtables-legacy-multi $(NMAP_PATH)/ncat/ncat $(WIREGUARD_TOOLS_PATH)/src/wg $(BUILD_PATH)/init
wireguard: selftests: remove ancient kernel compatibility code Quite a bit of the test suite was designed to work with ancient kernels. Thankfully we no longer have to deal with this. This commit updates things that we can finally update and removes things that we can finally remove, to avoid the build-up of the last several years as a result of having to support ancient kernels. We can finally rely on suppress_ prefixlength being available. On the build side of things, the no-PIE hack is no longer required, and we can bump some of the tools, repair our m68k and i686-kvm support, and get better coverage of the static branches used in the crypto lib and in udp_tunnel. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02 17:47:49 +01:00
$(MAKE) -C $(KERNEL_PATH) O=$(KERNEL_BUILD_PATH) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(CROSS_COMPILE)
wireguard: selftests: always call kernel makefile These selftests are used for much more extensive changes than just the wireguard source files. So always call the kernel's build file, which will do something or nothing after checking the whole tree, per usual. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-07 02:31:54 +02:00
.PHONY: $(KERNEL_BZIMAGE)
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
$(TOOLCHAIN_PATH)/$(CHOST)/include/linux/.installed: | $(KERNEL_BUILD_PATH)/.config $(TOOLCHAIN_PATH)/.installed
rm -rf $(TOOLCHAIN_PATH)/$(CHOST)/include/linux
$(MAKE) -C $(KERNEL_PATH) O=$(KERNEL_BUILD_PATH) INSTALL_HDR_PATH=$(TOOLCHAIN_PATH)/$(CHOST) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(CROSS_COMPILE) headers_install
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
touch $@
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
$(TOOLCHAIN_PATH)/.installed: $(TOOLCHAIN_TAR)
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
mkdir -p $(BUILD_PATH)
flock -s $<.lock tar -C $(BUILD_PATH) -xf $<
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
$(STRIP) -s $(TOOLCHAIN_PATH)/$(CHOST)/lib/libc.so
wireguard: selftests: restore support for ccache When moving to non-system toolchains, we inadvertantly killed the ability to use ccache. So instead, build ccache support into the test harness directly. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:18 +02:00
ifneq ($(CCACHE_PATH),)
mkdir -p $(TOOLCHAIN_PATH)/bin/ccache
ln -s $(CCACHE_PATH) $(TOOLCHAIN_PATH)/bin/ccache/$(CC)
endif
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
touch $@
$(IPERF_PATH)/.installed: $(IPERF_TAR)
mkdir -p $(BUILD_PATH)
flock -s $<.lock tar -C $(BUILD_PATH) -xf $<
sed -i '1s/^/#include <stdint.h>/' $(IPERF_PATH)/src/cjson.h $(IPERF_PATH)/src/timer.h
sed -i -r 's/-p?g//g' $(IPERF_PATH)/src/Makefile*
touch $@
$(IPERF_PATH)/src/iperf3: | $(IPERF_PATH)/.installed $(USERSPACE_DEPS)
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
cd $(IPERF_PATH) && autoreconf -fi
wireguard: selftests: remove ancient kernel compatibility code Quite a bit of the test suite was designed to work with ancient kernels. Thankfully we no longer have to deal with this. This commit updates things that we can finally update and removes things that we can finally remove, to avoid the build-up of the last several years as a result of having to support ancient kernels. We can finally rely on suppress_ prefixlength being available. On the build side of things, the no-PIE hack is no longer required, and we can bump some of the tools, repair our m68k and i686-kvm support, and get better coverage of the static branches used in the crypto lib and in udp_tunnel. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02 17:47:49 +01:00
cd $(IPERF_PATH) && CFLAGS="$(CFLAGS) -D_GNU_SOURCE" ./configure --prefix=/ $(CROSS_COMPILE_FLAG) --enable-static --disable-shared --with-openssl=no
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
$(MAKE) -C $(IPERF_PATH)
$(STRIP) -s $@
$(WIREGUARD_TOOLS_PATH)/.installed: $(WIREGUARD_TOOLS_TAR)
wireguard: selftests: reduce complexity and fix make races This gives us fewer dependencies and shortens build time, fixes up some hash checking race conditions, and also fixes missing directory creation that caused issues on massively parallel builds. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14 23:57:20 +01:00
mkdir -p $(BUILD_PATH)
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
flock -s $<.lock tar -C $(BUILD_PATH) -xf $<
touch $@
wireguard: selftests: reduce complexity and fix make races This gives us fewer dependencies and shortens build time, fixes up some hash checking race conditions, and also fixes missing directory creation that caused issues on massively parallel builds. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14 23:57:20 +01:00
$(WIREGUARD_TOOLS_PATH)/src/wg: | $(WIREGUARD_TOOLS_PATH)/.installed $(USERSPACE_DEPS)
$(MAKE) -C $(WIREGUARD_TOOLS_PATH)/src wg
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
$(STRIP) -s $@
$(BUILD_PATH)/init: init.c | $(USERSPACE_DEPS)
mkdir -p $(BUILD_PATH)
wireguard: selftests: use newer toolchains to fill out architectures Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:17 +02:00
$(CC) -o $@ $(CFLAGS) $(LDFLAGS) -std=gnu11 $<
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
$(STRIP) -s $@
$(IPUTILS_PATH)/.installed: $(IPUTILS_TAR)
mkdir -p $(BUILD_PATH)
flock -s $<.lock tar -C $(BUILD_PATH) -xf $<
touch $@
$(IPUTILS_PATH)/ping: | $(IPUTILS_PATH)/.installed $(USERSPACE_DEPS)
wireguard: selftests: remove ancient kernel compatibility code Quite a bit of the test suite was designed to work with ancient kernels. Thankfully we no longer have to deal with this. This commit updates things that we can finally update and removes things that we can finally remove, to avoid the build-up of the last several years as a result of having to support ancient kernels. We can finally rely on suppress_ prefixlength being available. On the build side of things, the no-PIE hack is no longer required, and we can bump some of the tools, repair our m68k and i686-kvm support, and get better coverage of the static branches used in the crypto lib and in udp_tunnel. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02 17:47:49 +01:00
sed -i /atexit/d $(IPUTILS_PATH)/ping.c
cd $(IPUTILS_PATH) && $(CC) $(CFLAGS) -std=c99 -o $@ ping.c ping_common.c ping6_common.c iputils_common.c -D_GNU_SOURCE -D'IPUTILS_VERSION(f)=f' -lresolv $(LDFLAGS)
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
$(STRIP) -s $@
$(BASH_PATH)/.installed: $(BASH_TAR)
mkdir -p $(BUILD_PATH)
flock -s $<.lock tar -C $(BUILD_PATH) -xf $<
touch $@
$(BASH_PATH)/bash: | $(BASH_PATH)/.installed $(USERSPACE_DEPS)
wireguard: selftests: bump package deps Use newer, more reliable package dependencies. These should hopefully reduce flakes. However, we keep the old iputils package, as it accumulated bugs after resulting in flakes on slow machines. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:19 +02:00
cd $(BASH_PATH) && ./configure --prefix=/ $(CROSS_COMPILE_FLAG) --without-bash-malloc --disable-debugger --disable-help-builtin --disable-history --disable-progcomp --disable-readline --disable-mem-scramble
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
$(MAKE) -C $(BASH_PATH)
$(STRIP) -s $@
$(IPROUTE2_PATH)/.installed: $(IPROUTE2_TAR)
mkdir -p $(BUILD_PATH)
flock -s $<.lock tar -C $(BUILD_PATH) -xf $<
wireguard: selftests: bump package deps Use newer, more reliable package dependencies. These should hopefully reduce flakes. However, we keep the old iputils package, as it accumulated bugs after resulting in flakes on slow machines. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:19 +02:00
printf 'CC:=$(CC)\nPKG_CONFIG:=pkg-config\nTC_CONFIG_XT:=n\nTC_CONFIG_ATM:=n\nTC_CONFIG_IPSET:=n\nIP_CONFIG_SETNS:=y\nHAVE_ELF:=n\nHAVE_MNL:=n\nHAVE_BERKELEY_DB:=n\nHAVE_LATEX:=n\nHAVE_PDFLATEX:=n\nCFLAGS+=-DHAVE_SETNS -DHAVE_HANDLE_AT\n' > $(IPROUTE2_PATH)/config.mk
printf 'libutil.a.done:\n\tflock -x $$@.lock $$(MAKE) -C lib\n\ttouch $$@\nip/ip: libutil.a.done\n\t$$(MAKE) -C ip ip\nmisc/ss: libutil.a.done\n\t$$(MAKE) -C misc ss\n' >> $(IPROUTE2_PATH)/Makefile
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
touch $@
wireguard: selftests: reduce complexity and fix make races This gives us fewer dependencies and shortens build time, fixes up some hash checking race conditions, and also fixes missing directory creation that caused issues on massively parallel builds. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14 23:57:20 +01:00
$(IPROUTE2_PATH)/ip/ip: | $(IPROUTE2_PATH)/.installed $(USERSPACE_DEPS)
$(MAKE) -C $(IPROUTE2_PATH) PREFIX=/ ip/ip
$(STRIP) -s $@
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
wireguard: selftests: reduce complexity and fix make races This gives us fewer dependencies and shortens build time, fixes up some hash checking race conditions, and also fixes missing directory creation that caused issues on massively parallel builds. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14 23:57:20 +01:00
$(IPROUTE2_PATH)/misc/ss: | $(IPROUTE2_PATH)/.installed $(USERSPACE_DEPS)
$(MAKE) -C $(IPROUTE2_PATH) PREFIX=/ misc/ss
$(STRIP) -s $@
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
$(IPTABLES_PATH)/.installed: $(IPTABLES_TAR)
mkdir -p $(BUILD_PATH)
flock -s $<.lock tar -C $(BUILD_PATH) -xf $<
sed -i -e "/nfnetlink=[01]/s:=[01]:=0:" -e "/nfconntrack=[01]/s:=[01]:=0:" $(IPTABLES_PATH)/configure
touch $@
wireguard: selftests: reduce complexity and fix make races This gives us fewer dependencies and shortens build time, fixes up some hash checking race conditions, and also fixes missing directory creation that caused issues on massively parallel builds. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14 23:57:20 +01:00
$(IPTABLES_PATH)/iptables/xtables-legacy-multi: | $(IPTABLES_PATH)/.installed $(USERSPACE_DEPS)
cd $(IPTABLES_PATH) && ./configure --prefix=/ $(CROSS_COMPILE_FLAG) --enable-static --disable-shared --disable-nftables --disable-bpf-compiler --disable-nfsynproxy --disable-libipq --disable-connlabel --with-kernel=$(BUILD_PATH)/include
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
$(MAKE) -C $(IPTABLES_PATH)
$(STRIP) -s $@
$(NMAP_PATH)/.installed: $(NMAP_TAR)
mkdir -p $(BUILD_PATH)
flock -s $<.lock tar -C $(BUILD_PATH) -xf $<
touch $@
$(NMAP_PATH)/ncat/ncat: | $(NMAP_PATH)/.installed $(USERSPACE_DEPS)
wireguard: selftests: remove ancient kernel compatibility code Quite a bit of the test suite was designed to work with ancient kernels. Thankfully we no longer have to deal with this. This commit updates things that we can finally update and removes things that we can finally remove, to avoid the build-up of the last several years as a result of having to support ancient kernels. We can finally rely on suppress_ prefixlength being available. On the build side of things, the no-PIE hack is no longer required, and we can bump some of the tools, repair our m68k and i686-kvm support, and get better coverage of the static branches used in the crypto lib and in udp_tunnel. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02 17:47:49 +01:00
cd $(NMAP_PATH) && ./configure --prefix=/ $(CROSS_COMPILE_FLAG) --enable-static --disable-shared --without-ndiff --without-zenmap --without-nping --with-libpcap=included --with-libpcre=included --with-libdnet=included --without-liblua --with-liblinear=included --without-nmap-update --without-openssl --with-pcap=linux --without-libssh
$(MAKE) -C $(NMAP_PATH)/libpcap
$(MAKE) -C $(NMAP_PATH)/ncat
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
$(STRIP) -s $@
clean:
rm -rf $(BUILD_PATH)
distclean: clean
rm -rf $(DISTFILES_PATH)
wireguard: selftests: restore support for ccache When moving to non-system toolchains, we inadvertantly killed the ability to use ccache. So instead, build ccache support into the test harness directly. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:18 +02:00
cacheclean: clean
ifneq ($(CCACHE_DIR),)
rm -rf $(CCACHE_DIR)
endif
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
menuconfig: $(KERNEL_BUILD_PATH)/.config
wireguard: selftests: remove ancient kernel compatibility code Quite a bit of the test suite was designed to work with ancient kernels. Thankfully we no longer have to deal with this. This commit updates things that we can finally update and removes things that we can finally remove, to avoid the build-up of the last several years as a result of having to support ancient kernels. We can finally rely on suppress_ prefixlength being available. On the build side of things, the no-PIE hack is no longer required, and we can bump some of the tools, repair our m68k and i686-kvm support, and get better coverage of the static branches used in the crypto lib and in udp_tunnel. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02 17:47:49 +01:00
$(MAKE) -C $(KERNEL_PATH) O=$(KERNEL_BUILD_PATH) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(CROSS_COMPILE) menuconfig
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
wireguard: selftests: restore support for ccache When moving to non-system toolchains, we inadvertantly killed the ability to use ccache. So instead, build ccache support into the test harness directly. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 22:29:18 +02:00
.PHONY: qemu build clean distclean cacheclean menuconfig
wireguard: selftests: import harness makefile for test suite WireGuard has been using this on build.wireguard.com for the last several years with considerable success. It allows for very quick and iterative development cycles, and supports several platforms. To run the test suite on your current platform in QEMU: $ make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it with KASAN and such turned on: $ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc) To run it emulated for another platform in QEMU: $ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc) At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k, mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64. The system supports incremental rebuilding, so it should be very fast to change a single file and then test it out and have immediate feedback. This requires for the right toolchain and qemu to be installed prior. I've had success with those from musl.cc. This is tailored for WireGuard at the moment, though later projects might generalize it for other network testing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15 22:08:00 +01:00
.DELETE_ON_ERROR:
Reference in New Issue Copy Permalink