Files
linux/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c

2194 lines
61 KiB
C
Raw Normal View History

/*
* Copyright (c) 2007 Mellanox Technologies. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
*/
#include <linux/kernel.h>
#include <linux/ethtool.h>
#include <linux/netdevice.h>
#include <linux/mlx4/driver.h>
#include <linux/mlx4/device.h>
#include <linux/in.h>
#include <net/ip.h>
#include <linux/bitmap.h>
net: convert users of bitmap_foo() to linkmode_foo() This converts instances of bitmap_foo(args..., __ETHTOOL_LINK_MODE_MASK_NBITS) to linkmode_foo(args...) I manually fixed up some lines to prevent them from being excessively long. Otherwise, this change was generated with the following semantic patch: // Generated with // echo linux/linkmode.h > includes // git grep -Flf includes include/ | cut -f 2- -d / | cat includes - \ // | sort | uniq | tee new_includes | wc -l && mv new_includes includes // and repeating until the number stopped going up @i@ @@ ( #include <linux/acpi_mdio.h> | #include <linux/brcmphy.h> | #include <linux/dsa/loop.h> | #include <linux/dsa/sja1105.h> | #include <linux/ethtool.h> | #include <linux/ethtool_netlink.h> | #include <linux/fec.h> | #include <linux/fs_enet_pd.h> | #include <linux/fsl/enetc_mdio.h> | #include <linux/fwnode_mdio.h> | #include <linux/linkmode.h> | #include <linux/lsm_audit.h> | #include <linux/mdio-bitbang.h> | #include <linux/mdio.h> | #include <linux/mdio-mux.h> | #include <linux/mii.h> | #include <linux/mii_timestamper.h> | #include <linux/mlx5/accel.h> | #include <linux/mlx5/cq.h> | #include <linux/mlx5/device.h> | #include <linux/mlx5/driver.h> | #include <linux/mlx5/eswitch.h> | #include <linux/mlx5/fs.h> | #include <linux/mlx5/port.h> | #include <linux/mlx5/qp.h> | #include <linux/mlx5/rsc_dump.h> | #include <linux/mlx5/transobj.h> | #include <linux/mlx5/vport.h> | #include <linux/of_mdio.h> | #include <linux/of_net.h> | #include <linux/pcs-lynx.h> | #include <linux/pcs/pcs-xpcs.h> | #include <linux/phy.h> | #include <linux/phy_led_triggers.h> | #include <linux/phylink.h> | #include <linux/platform_data/bcmgenet.h> | #include <linux/platform_data/xilinx-ll-temac.h> | #include <linux/pxa168_eth.h> | #include <linux/qed/qed_eth_if.h> | #include <linux/qed/qed_fcoe_if.h> | #include <linux/qed/qed_if.h> | #include <linux/qed/qed_iov_if.h> | #include <linux/qed/qed_iscsi_if.h> | #include <linux/qed/qed_ll2_if.h> | #include <linux/qed/qed_nvmetcp_if.h> | #include <linux/qed/qed_rdma_if.h> | #include <linux/sfp.h> | #include <linux/sh_eth.h> | #include <linux/smsc911x.h> | #include <linux/soc/nxp/lpc32xx-misc.h> | #include <linux/stmmac.h> | #include <linux/sunrpc/svc_rdma.h> | #include <linux/sxgbe_platform.h> | #include <net/cfg80211.h> | #include <net/dsa.h> | #include <net/mac80211.h> | #include <net/selftests.h> | #include <rdma/ib_addr.h> | #include <rdma/ib_cache.h> | #include <rdma/ib_cm.h> | #include <rdma/ib_hdrs.h> | #include <rdma/ib_mad.h> | #include <rdma/ib_marshall.h> | #include <rdma/ib_pack.h> | #include <rdma/ib_pma.h> | #include <rdma/ib_sa.h> | #include <rdma/ib_smi.h> | #include <rdma/ib_umem.h> | #include <rdma/ib_umem_odp.h> | #include <rdma/ib_verbs.h> | #include <rdma/iw_cm.h> | #include <rdma/mr_pool.h> | #include <rdma/opa_addr.h> | #include <rdma/opa_port_info.h> | #include <rdma/opa_smi.h> | #include <rdma/opa_vnic.h> | #include <rdma/rdma_cm.h> | #include <rdma/rdma_cm_ib.h> | #include <rdma/rdmavt_cq.h> | #include <rdma/rdma_vt.h> | #include <rdma/rdmavt_qp.h> | #include <rdma/rw.h> | #include <rdma/tid_rdma_defs.h> | #include <rdma/uverbs_ioctl.h> | #include <rdma/uverbs_named_ioctl.h> | #include <rdma/uverbs_std_types.h> | #include <rdma/uverbs_types.h> | #include <soc/mscc/ocelot.h> | #include <soc/mscc/ocelot_ptp.h> | #include <soc/mscc/ocelot_vcap.h> | #include <trace/events/ib_mad.h> | #include <trace/events/rdma_core.h> | #include <trace/events/rdma.h> | #include <trace/events/rpcrdma.h> | #include <uapi/linux/ethtool.h> | #include <uapi/linux/ethtool_netlink.h> | #include <uapi/linux/mdio.h> | #include <uapi/linux/mii.h> ) @depends on i@ expression list args; @@ ( - bitmap_zero(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_zero(args) | - bitmap_copy(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_copy(args) | - bitmap_and(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_and(args) | - bitmap_or(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_or(args) | - bitmap_empty(args, ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_empty(args) | - bitmap_andnot(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_andnot(args) | - bitmap_equal(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_equal(args) | - bitmap_intersects(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_intersects(args) | - bitmap_subset(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_subset(args) ) Add missing linux/mii.h include to mellanox. -DaveM Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-22 18:41:04 -04:00
#include <linux/mii.h>
#include "mlx4_en.h"
#include "en_port.h"
#define EN_ETHTOOL_QP_ATTACH (1ull << 63)
#define EN_ETHTOOL_SHORT_MASK cpu_to_be16(0xffff)
#define EN_ETHTOOL_WORD_MASK cpu_to_be32(0xffffffff)
int mlx4_en_moderation_update(struct mlx4_en_priv *priv)
{
int i, t;
int err = 0;
for (t = 0 ; t < MLX4_EN_NUM_TX_TYPES; t++) {
for (i = 0; i < priv->tx_ring_num[t]; i++) {
priv->tx_cq[t][i]->moder_cnt = priv->tx_frames;
priv->tx_cq[t][i]->moder_time = priv->tx_usecs;
if (priv->port_up) {
err = mlx4_en_set_cq_moder(priv,
priv->tx_cq[t][i]);
if (err)
return err;
}
}
}
if (priv->adaptive_rx_coal)
return 0;
for (i = 0; i < priv->rx_ring_num; i++) {
priv->rx_cq[i]->moder_cnt = priv->rx_frames;
priv->rx_cq[i]->moder_time = priv->rx_usecs;
priv->last_moder_time[i] = MLX4_EN_AUTO_CONF;
if (priv->port_up) {
err = mlx4_en_set_cq_moder(priv, priv->rx_cq[i]);
if (err)
return err;
}
}
return err;
}
static void
mlx4_en_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *drvinfo)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
struct mlx4_en_dev *mdev = priv->mdev;
strlcpy(drvinfo->driver, DRV_NAME, sizeof(drvinfo->driver));
strlcpy(drvinfo->version, DRV_VERSION,
sizeof(drvinfo->version));
snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
"%d.%d.%d",
(u16) (mdev->dev->caps.fw_ver >> 32),
(u16) ((mdev->dev->caps.fw_ver >> 16) & 0xffff),
(u16) (mdev->dev->caps.fw_ver & 0xffff));
strlcpy(drvinfo->bus_info, pci_name(mdev->dev->persist->pdev),
sizeof(drvinfo->bus_info));
}
static const char mlx4_en_priv_flags[][ETH_GSTRING_LEN] = {
"blueflame",
"phv-bit"
};
static const char main_strings[][ETH_GSTRING_LEN] = {
/* main statistics */
"rx_packets", "tx_packets", "rx_bytes", "tx_bytes", "rx_errors",
"tx_errors", "rx_dropped", "tx_dropped", "multicast", "collisions",
"rx_length_errors", "rx_over_errors", "rx_crc_errors",
"rx_frame_errors", "rx_fifo_errors", "rx_missed_errors",
"tx_aborted_errors", "tx_carrier_errors", "tx_fifo_errors",
"tx_heartbeat_errors", "tx_window_errors",
/* port statistics */
"tso_packets",
"xmit_more",
"queue_stopped", "wake_queue", "tx_timeout", "rx_alloc_pages",
"rx_csum_good", "rx_csum_none", "rx_csum_complete", "tx_chksum_offload",
/* pf statistics */
"pf_rx_packets",
"pf_rx_bytes",
"pf_tx_packets",
"pf_tx_bytes",
/* priority flow control statistics rx */
"rx_pause_prio_0", "rx_pause_duration_prio_0",
"rx_pause_transition_prio_0",
"rx_pause_prio_1", "rx_pause_duration_prio_1",
"rx_pause_transition_prio_1",
"rx_pause_prio_2", "rx_pause_duration_prio_2",
"rx_pause_transition_prio_2",
"rx_pause_prio_3", "rx_pause_duration_prio_3",
"rx_pause_transition_prio_3",
"rx_pause_prio_4", "rx_pause_duration_prio_4",
"rx_pause_transition_prio_4",
"rx_pause_prio_5", "rx_pause_duration_prio_5",
"rx_pause_transition_prio_5",
"rx_pause_prio_6", "rx_pause_duration_prio_6",
"rx_pause_transition_prio_6",
"rx_pause_prio_7", "rx_pause_duration_prio_7",
"rx_pause_transition_prio_7",
/* flow control statistics rx */
"rx_pause", "rx_pause_duration", "rx_pause_transition",
/* priority flow control statistics tx */
"tx_pause_prio_0", "tx_pause_duration_prio_0",
"tx_pause_transition_prio_0",
"tx_pause_prio_1", "tx_pause_duration_prio_1",
"tx_pause_transition_prio_1",
"tx_pause_prio_2", "tx_pause_duration_prio_2",
"tx_pause_transition_prio_2",
"tx_pause_prio_3", "tx_pause_duration_prio_3",
"tx_pause_transition_prio_3",
"tx_pause_prio_4", "tx_pause_duration_prio_4",
"tx_pause_transition_prio_4",
"tx_pause_prio_5", "tx_pause_duration_prio_5",
"tx_pause_transition_prio_5",
"tx_pause_prio_6", "tx_pause_duration_prio_6",
"tx_pause_transition_prio_6",
"tx_pause_prio_7", "tx_pause_duration_prio_7",
"tx_pause_transition_prio_7",
/* flow control statistics tx */
"tx_pause", "tx_pause_duration", "tx_pause_transition",
/* packet statistics */
"rx_multicast_packets",
"rx_broadcast_packets",
"rx_jabbers",
"rx_in_range_length_error",
"rx_out_range_length_error",
"tx_multicast_packets",
"tx_broadcast_packets",
"rx_prio_0_packets", "rx_prio_0_bytes",
"rx_prio_1_packets", "rx_prio_1_bytes",
"rx_prio_2_packets", "rx_prio_2_bytes",
"rx_prio_3_packets", "rx_prio_3_bytes",
"rx_prio_4_packets", "rx_prio_4_bytes",
"rx_prio_5_packets", "rx_prio_5_bytes",
"rx_prio_6_packets", "rx_prio_6_bytes",
"rx_prio_7_packets", "rx_prio_7_bytes",
"rx_novlan_packets", "rx_novlan_bytes",
"tx_prio_0_packets", "tx_prio_0_bytes",
"tx_prio_1_packets", "tx_prio_1_bytes",
"tx_prio_2_packets", "tx_prio_2_bytes",
"tx_prio_3_packets", "tx_prio_3_bytes",
"tx_prio_4_packets", "tx_prio_4_bytes",
"tx_prio_5_packets", "tx_prio_5_bytes",
"tx_prio_6_packets", "tx_prio_6_bytes",
"tx_prio_7_packets", "tx_prio_7_bytes",
"tx_novlan_packets", "tx_novlan_bytes",
/* xdp statistics */
"rx_xdp_drop",
"rx_xdp_redirect",
"rx_xdp_redirect_fail",
"rx_xdp_tx",
"rx_xdp_tx_full",
/* phy statistics */
"rx_packets_phy", "rx_bytes_phy",
"tx_packets_phy", "tx_bytes_phy",
};
static const char mlx4_en_test_names[][ETH_GSTRING_LEN]= {
"Interrupt Test",
"Link Test",
"Speed Test",
"Register Test",
"Loopback Test",
};
static u32 mlx4_en_get_msglevel(struct net_device *dev)
{
return ((struct mlx4_en_priv *) netdev_priv(dev))->msg_enable;
}
static void mlx4_en_set_msglevel(struct net_device *dev, u32 val)
{
((struct mlx4_en_priv *) netdev_priv(dev))->msg_enable = val;
}
static void mlx4_en_get_wol(struct net_device *netdev,
struct ethtool_wolinfo *wol)
{
struct mlx4_en_priv *priv = netdev_priv(netdev);
struct mlx4_caps *caps = &priv->mdev->dev->caps;
int err = 0;
u64 config = 0;
u64 mask;
if ((priv->port < 1) || (priv->port > 2)) {
en_err(priv, "Failed to get WoL information\n");
return;
}
mask = (priv->port == 1) ? MLX4_DEV_CAP_FLAG_WOL_PORT1 :
MLX4_DEV_CAP_FLAG_WOL_PORT2;
if (!(caps->flags & mask)) {
wol->supported = 0;
wol->wolopts = 0;
return;
}
if (caps->wol_port[priv->port])
wol->supported = WAKE_MAGIC;
else
wol->supported = 0;
err = mlx4_wol_read(priv->mdev->dev, &config, priv->port);
if (err) {
en_err(priv, "Failed to get WoL information\n");
return;
}
if ((config & MLX4_EN_WOL_ENABLED) && (config & MLX4_EN_WOL_MAGIC))
wol->wolopts = WAKE_MAGIC;
else
wol->wolopts = 0;
}
static int mlx4_en_set_wol(struct net_device *netdev,
struct ethtool_wolinfo *wol)
{
struct mlx4_en_priv *priv = netdev_priv(netdev);
u64 config = 0;
int err = 0;
u64 mask;
if ((priv->port < 1) || (priv->port > 2))
return -EOPNOTSUPP;
mask = (priv->port == 1) ? MLX4_DEV_CAP_FLAG_WOL_PORT1 :
MLX4_DEV_CAP_FLAG_WOL_PORT2;
if (!(priv->mdev->dev->caps.flags & mask))
return -EOPNOTSUPP;
if (wol->supported & ~WAKE_MAGIC)
return -EINVAL;
err = mlx4_wol_read(priv->mdev->dev, &config, priv->port);
if (err) {
en_err(priv, "Failed to get WoL info, unable to modify\n");
return err;
}
if (wol->wolopts & WAKE_MAGIC) {
config |= MLX4_EN_WOL_DO_MODIFY | MLX4_EN_WOL_ENABLED |
MLX4_EN_WOL_MAGIC;
} else {
config &= ~(MLX4_EN_WOL_ENABLED | MLX4_EN_WOL_MAGIC);
config |= MLX4_EN_WOL_DO_MODIFY;
}
err = mlx4_wol_write(priv->mdev->dev, config, priv->port);
if (err)
en_err(priv, "Failed to set WoL information\n");
return err;
}
struct bitmap_iterator {
unsigned long *stats_bitmap;
unsigned int count;
unsigned int iterator;
bool advance_array; /* if set, force no increments */
};
static inline void bitmap_iterator_init(struct bitmap_iterator *h,
unsigned long *stats_bitmap,
int count)
{
h->iterator = 0;
h->advance_array = !bitmap_empty(stats_bitmap, count);
h->count = h->advance_array ? bitmap_weight(stats_bitmap, count)
: count;
h->stats_bitmap = stats_bitmap;
}
static inline int bitmap_iterator_test(struct bitmap_iterator *h)
{
return !h->advance_array ? 1 : test_bit(h->iterator, h->stats_bitmap);
}
static inline int bitmap_iterator_inc(struct bitmap_iterator *h)
{
return h->iterator++;
}
static inline unsigned int
bitmap_iterator_count(struct bitmap_iterator *h)
{
return h->count;
}
static int mlx4_en_get_sset_count(struct net_device *dev, int sset)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
struct bitmap_iterator it;
bitmap_iterator_init(&it, priv->stats_bitmap.bitmap, NUM_ALL_STATS);
switch (sset) {
case ETH_SS_STATS:
return bitmap_iterator_count(&it) +
(priv->tx_ring_num[TX] * 2) +
(priv->rx_ring_num * (3 + NUM_XDP_STATS));
case ETH_SS_TEST:
return MLX4_EN_NUM_SELF_TEST - !(priv->mdev->dev->caps.flags
& MLX4_DEV_CAP_FLAG_UC_LOOPBACK) * 2;
case ETH_SS_PRIV_FLAGS:
return ARRAY_SIZE(mlx4_en_priv_flags);
default:
return -EOPNOTSUPP;
}
}
static void mlx4_en_get_ethtool_stats(struct net_device *dev,
struct ethtool_stats *stats, uint64_t *data)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
int index = 0;
int i;
struct bitmap_iterator it;
bitmap_iterator_init(&it, priv->stats_bitmap.bitmap, NUM_ALL_STATS);
spin_lock_bh(&priv->stats_lock);
mlx4: give precise rx/tx bytes/packets counters mlx4 stats are chaotic because a deferred work queue is responsible to update them every 250 ms. Even sampling stats every one second with "sar -n DEV 1" gives variations like the following : lpaa23:~# sar -n DEV 1 10 | grep eth0 | cut -c1-65 07:39:22 eth0 146877.00 3265554.00 9467.15 4828168.50 07:39:23 eth0 146587.00 3260329.00 9448.15 4820445.98 07:39:24 eth0 146894.00 3259989.00 9468.55 4819943.26 07:39:25 eth0 110368.00 2454497.00 7113.95 3629012.17 <<>> 07:39:26 eth0 146563.00 3257502.00 9447.25 4816266.23 07:39:27 eth0 145678.00 3258292.00 9389.79 4817414.39 07:39:28 eth0 145268.00 3253171.00 9363.85 4809852.46 07:39:29 eth0 146439.00 3262185.00 9438.97 4823172.48 07:39:30 eth0 146758.00 3264175.00 9459.94 4826124.13 07:39:31 eth0 146843.00 3256903.00 9465.44 4815381.97 Average: eth0 142827.50 3179259.70 9206.30 4700578.16 This patch allows rx/tx bytes/packets counters being folded at the time we need stats. We now can fetch stats every 1 ms if we want to check NIC behavior on a small time window. It is also easier to detect anomalies. lpaa23:~# sar -n DEV 1 10 | grep eth0 | cut -c1-65 07:42:50 eth0 142915.00 3177696.00 9212.06 4698270.42 07:42:51 eth0 143741.00 3200232.00 9265.15 4731593.02 07:42:52 eth0 142781.00 3171600.00 9202.92 4689260.16 07:42:53 eth0 143835.00 3192932.00 9271.80 4720761.39 07:42:54 eth0 141922.00 3165174.00 9147.64 4679759.21 07:42:55 eth0 142993.00 3207038.00 9216.78 4741653.05 07:42:56 eth0 141394.06 3154335.64 9113.85 4663731.73 07:42:57 eth0 141850.00 3161202.00 9144.48 4673866.07 07:42:58 eth0 143439.00 3180736.00 9246.05 4702755.35 07:42:59 eth0 143501.00 3210992.00 9249.99 4747501.84 Average: eth0 142835.66 3182165.93 9206.98 4704874.08 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25 07:46:20 -08:00
mlx4_en_fold_software_stats(dev);
for (i = 0; i < NUM_MAIN_STATS; i++, bitmap_iterator_inc(&it))
if (bitmap_iterator_test(&it))
data[index++] = ((unsigned long *)&dev->stats)[i];
for (i = 0; i < NUM_PORT_STATS; i++, bitmap_iterator_inc(&it))
if (bitmap_iterator_test(&it))
data[index++] = ((unsigned long *)&priv->port_stats)[i];
for (i = 0; i < NUM_PF_STATS; i++, bitmap_iterator_inc(&it))
if (bitmap_iterator_test(&it))
data[index++] =
((unsigned long *)&priv->pf_stats)[i];
for (i = 0; i < NUM_FLOW_PRIORITY_STATS_RX;
i++, bitmap_iterator_inc(&it))
if (bitmap_iterator_test(&it))
data[index++] =
((u64 *)&priv->rx_priority_flowstats)[i];
for (i = 0; i < NUM_FLOW_STATS_RX; i++, bitmap_iterator_inc(&it))
if (bitmap_iterator_test(&it))
data[index++] = ((u64 *)&priv->rx_flowstats)[i];
for (i = 0; i < NUM_FLOW_PRIORITY_STATS_TX;
i++, bitmap_iterator_inc(&it))
if (bitmap_iterator_test(&it))
data[index++] =
((u64 *)&priv->tx_priority_flowstats)[i];
for (i = 0; i < NUM_FLOW_STATS_TX; i++, bitmap_iterator_inc(&it))
if (bitmap_iterator_test(&it))
data[index++] = ((u64 *)&priv->tx_flowstats)[i];
for (i = 0; i < NUM_PKT_STATS; i++, bitmap_iterator_inc(&it))
if (bitmap_iterator_test(&it))
data[index++] = ((unsigned long *)&priv->pkstats)[i];
for (i = 0; i < NUM_XDP_STATS; i++, bitmap_iterator_inc(&it))
if (bitmap_iterator_test(&it))
data[index++] = ((unsigned long *)&priv->xdp_stats)[i];
for (i = 0; i < NUM_PHY_STATS; i++, bitmap_iterator_inc(&it))
if (bitmap_iterator_test(&it))
data[index++] = ((unsigned long *)&priv->phy_stats)[i];
for (i = 0; i < priv->tx_ring_num[TX]; i++) {
data[index++] = priv->tx_ring[TX][i]->packets;
data[index++] = priv->tx_ring[TX][i]->bytes;
}
for (i = 0; i < priv->rx_ring_num; i++) {
data[index++] = priv->rx_ring[i]->packets;
data[index++] = priv->rx_ring[i]->bytes;
data[index++] = priv->rx_ring[i]->dropped;
data[index++] = priv->rx_ring[i]->xdp_drop;
data[index++] = priv->rx_ring[i]->xdp_redirect;
data[index++] = priv->rx_ring[i]->xdp_redirect_fail;
data[index++] = priv->rx_ring[i]->xdp_tx;
data[index++] = priv->rx_ring[i]->xdp_tx_full;
}
spin_unlock_bh(&priv->stats_lock);
}
static void mlx4_en_self_test(struct net_device *dev,
struct ethtool_test *etest, u64 *buf)
{
mlx4_en_ex_selftest(dev, &etest->flags, buf);
}
static void mlx4_en_get_strings(struct net_device *dev,
uint32_t stringset, uint8_t *data)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
int index = 0;
int i, strings = 0;
struct bitmap_iterator it;
bitmap_iterator_init(&it, priv->stats_bitmap.bitmap, NUM_ALL_STATS);
switch (stringset) {
case ETH_SS_TEST:
for (i = 0; i < MLX4_EN_NUM_SELF_TEST - 2; i++)
strcpy(data + i * ETH_GSTRING_LEN, mlx4_en_test_names[i]);
if (priv->mdev->dev->caps.flags & MLX4_DEV_CAP_FLAG_UC_LOOPBACK)
for (; i < MLX4_EN_NUM_SELF_TEST; i++)
strcpy(data + i * ETH_GSTRING_LEN, mlx4_en_test_names[i]);
break;
case ETH_SS_STATS:
/* Add main counters */
for (i = 0; i < NUM_MAIN_STATS; i++, strings++,
bitmap_iterator_inc(&it))
if (bitmap_iterator_test(&it))
strcpy(data + (index++) * ETH_GSTRING_LEN,
main_strings[strings]);
for (i = 0; i < NUM_PORT_STATS; i++, strings++,
bitmap_iterator_inc(&it))
if (bitmap_iterator_test(&it))
strcpy(data + (index++) * ETH_GSTRING_LEN,
main_strings[strings]);
for (i = 0; i < NUM_PF_STATS; i++, strings++,
bitmap_iterator_inc(&it))
if (bitmap_iterator_test(&it))
strcpy(data + (index++) * ETH_GSTRING_LEN,
main_strings[strings]);
for (i = 0; i < NUM_FLOW_STATS; i++, strings++,
bitmap_iterator_inc(&it))
if (bitmap_iterator_test(&it))
strcpy(data + (index++) * ETH_GSTRING_LEN,
main_strings[strings]);
for (i = 0; i < NUM_PKT_STATS; i++, strings++,
bitmap_iterator_inc(&it))
if (bitmap_iterator_test(&it))
strcpy(data + (index++) * ETH_GSTRING_LEN,
main_strings[strings]);
for (i = 0; i < NUM_XDP_STATS; i++, strings++,
bitmap_iterator_inc(&it))
if (bitmap_iterator_test(&it))
strcpy(data + (index++) * ETH_GSTRING_LEN,
main_strings[strings]);
for (i = 0; i < NUM_PHY_STATS; i++, strings++,
bitmap_iterator_inc(&it))
if (bitmap_iterator_test(&it))
strcpy(data + (index++) * ETH_GSTRING_LEN,
main_strings[strings]);
for (i = 0; i < priv->tx_ring_num[TX]; i++) {
sprintf(data + (index++) * ETH_GSTRING_LEN,
"tx%d_packets", i);
sprintf(data + (index++) * ETH_GSTRING_LEN,
"tx%d_bytes", i);
}
for (i = 0; i < priv->rx_ring_num; i++) {
sprintf(data + (index++) * ETH_GSTRING_LEN,
"rx%d_packets", i);
sprintf(data + (index++) * ETH_GSTRING_LEN,
"rx%d_bytes", i);
sprintf(data + (index++) * ETH_GSTRING_LEN,
"rx%d_dropped", i);
sprintf(data + (index++) * ETH_GSTRING_LEN,
"rx%d_xdp_drop", i);
sprintf(data + (index++) * ETH_GSTRING_LEN,
"rx%d_xdp_redirect", i);
sprintf(data + (index++) * ETH_GSTRING_LEN,
"rx%d_xdp_redirect_fail", i);
sprintf(data + (index++) * ETH_GSTRING_LEN,
"rx%d_xdp_tx", i);
sprintf(data + (index++) * ETH_GSTRING_LEN,
"rx%d_xdp_tx_full", i);
}
break;
case ETH_SS_PRIV_FLAGS:
for (i = 0; i < ARRAY_SIZE(mlx4_en_priv_flags); i++)
strcpy(data + i * ETH_GSTRING_LEN,
mlx4_en_priv_flags[i]);
break;
}
}
static u32 mlx4_en_autoneg_get(struct net_device *dev)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
struct mlx4_en_dev *mdev = priv->mdev;
u32 autoneg = AUTONEG_DISABLE;
if ((mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_ETH_BACKPL_AN_REP) &&
(priv->port_state.flags & MLX4_EN_PORT_ANE))
autoneg = AUTONEG_ENABLE;
return autoneg;
}
static void ptys2ethtool_update_supported_port(unsigned long *mask,
struct mlx4_ptys_reg *ptys_reg)
{
u32 eth_proto = be32_to_cpu(ptys_reg->eth_proto_cap);
if (eth_proto & (MLX4_PROT_MASK(MLX4_10GBASE_T)
| MLX4_PROT_MASK(MLX4_1000BASE_T)
| MLX4_PROT_MASK(MLX4_100BASE_TX))) {
__set_bit(ETHTOOL_LINK_MODE_TP_BIT, mask);
} else if (eth_proto & (MLX4_PROT_MASK(MLX4_10GBASE_CR)
| MLX4_PROT_MASK(MLX4_10GBASE_SR)
| MLX4_PROT_MASK(MLX4_56GBASE_SR4)
| MLX4_PROT_MASK(MLX4_40GBASE_CR4)
| MLX4_PROT_MASK(MLX4_40GBASE_SR4)
| MLX4_PROT_MASK(MLX4_1000BASE_CX_SGMII))) {
__set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, mask);
} else if (eth_proto & (MLX4_PROT_MASK(MLX4_56GBASE_KR4)
| MLX4_PROT_MASK(MLX4_40GBASE_KR4)
| MLX4_PROT_MASK(MLX4_20GBASE_KR2)
| MLX4_PROT_MASK(MLX4_10GBASE_KR)
| MLX4_PROT_MASK(MLX4_10GBASE_KX4)
| MLX4_PROT_MASK(MLX4_1000BASE_KX))) {
__set_bit(ETHTOOL_LINK_MODE_Backplane_BIT, mask);
}
}
static u32 ptys_get_active_port(struct mlx4_ptys_reg *ptys_reg)
{
u32 eth_proto = be32_to_cpu(ptys_reg->eth_proto_oper);
if (!eth_proto) /* link down */
eth_proto = be32_to_cpu(ptys_reg->eth_proto_cap);
if (eth_proto & (MLX4_PROT_MASK(MLX4_10GBASE_T)
| MLX4_PROT_MASK(MLX4_1000BASE_T)
| MLX4_PROT_MASK(MLX4_100BASE_TX))) {
return PORT_TP;
}
if (eth_proto & (MLX4_PROT_MASK(MLX4_10GBASE_SR)
| MLX4_PROT_MASK(MLX4_56GBASE_SR4)
| MLX4_PROT_MASK(MLX4_40GBASE_SR4)
| MLX4_PROT_MASK(MLX4_1000BASE_CX_SGMII))) {
return PORT_FIBRE;
}
if (eth_proto & (MLX4_PROT_MASK(MLX4_10GBASE_CR)
| MLX4_PROT_MASK(MLX4_56GBASE_CR4)
| MLX4_PROT_MASK(MLX4_40GBASE_CR4))) {
return PORT_DA;
}
if (eth_proto & (MLX4_PROT_MASK(MLX4_56GBASE_KR4)
| MLX4_PROT_MASK(MLX4_40GBASE_KR4)
| MLX4_PROT_MASK(MLX4_20GBASE_KR2)
| MLX4_PROT_MASK(MLX4_10GBASE_KR)
| MLX4_PROT_MASK(MLX4_10GBASE_KX4)
| MLX4_PROT_MASK(MLX4_1000BASE_KX))) {
return PORT_NONE;
}
return PORT_OTHER;
}
#define MLX4_LINK_MODES_SZ \
(sizeof_field(struct mlx4_ptys_reg, eth_proto_cap) * 8)
enum ethtool_report {
SUPPORTED = 0,
ADVERTISED = 1,
};
struct ptys2ethtool_config {
__ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
__ETHTOOL_DECLARE_LINK_MODE_MASK(advertised);
u32 speed;
};
static unsigned long *ptys2ethtool_link_mode(struct ptys2ethtool_config *cfg,
enum ethtool_report report)
{
switch (report) {
case SUPPORTED:
return cfg->supported;
case ADVERTISED:
return cfg->advertised;
}
return NULL;
}
#define MLX4_BUILD_PTYS2ETHTOOL_CONFIG(reg_, speed_, ...) \
({ \
struct ptys2ethtool_config *cfg; \
static const unsigned int modes[] = { __VA_ARGS__ }; \
unsigned int i; \
cfg = &ptys2ethtool_map[reg_]; \
cfg->speed = speed_; \
net: convert users of bitmap_foo() to linkmode_foo() This converts instances of bitmap_foo(args..., __ETHTOOL_LINK_MODE_MASK_NBITS) to linkmode_foo(args...) I manually fixed up some lines to prevent them from being excessively long. Otherwise, this change was generated with the following semantic patch: // Generated with // echo linux/linkmode.h > includes // git grep -Flf includes include/ | cut -f 2- -d / | cat includes - \ // | sort | uniq | tee new_includes | wc -l && mv new_includes includes // and repeating until the number stopped going up @i@ @@ ( #include <linux/acpi_mdio.h> | #include <linux/brcmphy.h> | #include <linux/dsa/loop.h> | #include <linux/dsa/sja1105.h> | #include <linux/ethtool.h> | #include <linux/ethtool_netlink.h> | #include <linux/fec.h> | #include <linux/fs_enet_pd.h> | #include <linux/fsl/enetc_mdio.h> | #include <linux/fwnode_mdio.h> | #include <linux/linkmode.h> | #include <linux/lsm_audit.h> | #include <linux/mdio-bitbang.h> | #include <linux/mdio.h> | #include <linux/mdio-mux.h> | #include <linux/mii.h> | #include <linux/mii_timestamper.h> | #include <linux/mlx5/accel.h> | #include <linux/mlx5/cq.h> | #include <linux/mlx5/device.h> | #include <linux/mlx5/driver.h> | #include <linux/mlx5/eswitch.h> | #include <linux/mlx5/fs.h> | #include <linux/mlx5/port.h> | #include <linux/mlx5/qp.h> | #include <linux/mlx5/rsc_dump.h> | #include <linux/mlx5/transobj.h> | #include <linux/mlx5/vport.h> | #include <linux/of_mdio.h> | #include <linux/of_net.h> | #include <linux/pcs-lynx.h> | #include <linux/pcs/pcs-xpcs.h> | #include <linux/phy.h> | #include <linux/phy_led_triggers.h> | #include <linux/phylink.h> | #include <linux/platform_data/bcmgenet.h> | #include <linux/platform_data/xilinx-ll-temac.h> | #include <linux/pxa168_eth.h> | #include <linux/qed/qed_eth_if.h> | #include <linux/qed/qed_fcoe_if.h> | #include <linux/qed/qed_if.h> | #include <linux/qed/qed_iov_if.h> | #include <linux/qed/qed_iscsi_if.h> | #include <linux/qed/qed_ll2_if.h> | #include <linux/qed/qed_nvmetcp_if.h> | #include <linux/qed/qed_rdma_if.h> | #include <linux/sfp.h> | #include <linux/sh_eth.h> | #include <linux/smsc911x.h> | #include <linux/soc/nxp/lpc32xx-misc.h> | #include <linux/stmmac.h> | #include <linux/sunrpc/svc_rdma.h> | #include <linux/sxgbe_platform.h> | #include <net/cfg80211.h> | #include <net/dsa.h> | #include <net/mac80211.h> | #include <net/selftests.h> | #include <rdma/ib_addr.h> | #include <rdma/ib_cache.h> | #include <rdma/ib_cm.h> | #include <rdma/ib_hdrs.h> | #include <rdma/ib_mad.h> | #include <rdma/ib_marshall.h> | #include <rdma/ib_pack.h> | #include <rdma/ib_pma.h> | #include <rdma/ib_sa.h> | #include <rdma/ib_smi.h> | #include <rdma/ib_umem.h> | #include <rdma/ib_umem_odp.h> | #include <rdma/ib_verbs.h> | #include <rdma/iw_cm.h> | #include <rdma/mr_pool.h> | #include <rdma/opa_addr.h> | #include <rdma/opa_port_info.h> | #include <rdma/opa_smi.h> | #include <rdma/opa_vnic.h> | #include <rdma/rdma_cm.h> | #include <rdma/rdma_cm_ib.h> | #include <rdma/rdmavt_cq.h> | #include <rdma/rdma_vt.h> | #include <rdma/rdmavt_qp.h> | #include <rdma/rw.h> | #include <rdma/tid_rdma_defs.h> | #include <rdma/uverbs_ioctl.h> | #include <rdma/uverbs_named_ioctl.h> | #include <rdma/uverbs_std_types.h> | #include <rdma/uverbs_types.h> | #include <soc/mscc/ocelot.h> | #include <soc/mscc/ocelot_ptp.h> | #include <soc/mscc/ocelot_vcap.h> | #include <trace/events/ib_mad.h> | #include <trace/events/rdma_core.h> | #include <trace/events/rdma.h> | #include <trace/events/rpcrdma.h> | #include <uapi/linux/ethtool.h> | #include <uapi/linux/ethtool_netlink.h> | #include <uapi/linux/mdio.h> | #include <uapi/linux/mii.h> ) @depends on i@ expression list args; @@ ( - bitmap_zero(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_zero(args) | - bitmap_copy(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_copy(args) | - bitmap_and(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_and(args) | - bitmap_or(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_or(args) | - bitmap_empty(args, ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_empty(args) | - bitmap_andnot(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_andnot(args) | - bitmap_equal(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_equal(args) | - bitmap_intersects(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_intersects(args) | - bitmap_subset(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_subset(args) ) Add missing linux/mii.h include to mellanox. -DaveM Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-22 18:41:04 -04:00
linkmode_zero(cfg->supported); \
linkmode_zero(cfg->advertised); \
for (i = 0 ; i < ARRAY_SIZE(modes) ; ++i) { \
__set_bit(modes[i], cfg->supported); \
__set_bit(modes[i], cfg->advertised); \
} \
})
/* Translates mlx4 link mode to equivalent ethtool Link modes/speed */
static struct ptys2ethtool_config ptys2ethtool_map[MLX4_LINK_MODES_SZ];
void __init mlx4_en_init_ptys2ethtool_map(void)
{
MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_100BASE_TX, SPEED_100,
ETHTOOL_LINK_MODE_100baseT_Full_BIT);
MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_1000BASE_T, SPEED_1000,
ETHTOOL_LINK_MODE_1000baseT_Full_BIT);
MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_1000BASE_CX_SGMII, SPEED_1000,
net/mlx4_en: Update reported link modes for 1/10G When link modes were initially added in commit 2c762679435dc ("net/mlx4_en: Use PTYS register to query ethtool settings") and later updated for the new ethtool API in commit 3d8f7cc78d0eb ("net: mlx4: use new ETHTOOL_G/SSETTINGS API") the only 1/10G non-baseT link modes configured were 1000baseKX, 10000baseKX4 and 10000baseKR. It looks like these got picked to represent other modes since nothing better was available. Switch to using more specific link modes added in commit 5711a98221443 ("net: ethtool: add support for 1000BaseX and missing 10G link modes"). Tested with MCX311A-XCAT connected via DAC. Before: % sudo ethtool enp3s0 Settings for enp3s0: Supported ports: [ FIBRE ] Supported link modes: 1000baseKX/Full 10000baseKR/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: 1000baseKX/Full 10000baseKR/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 10000Mb/s Duplex: Full Auto-negotiation: off Port: Direct Attach Copper PHYAD: 0 Transceiver: internal Supports Wake-on: d Wake-on: d Current message level: 0x00000014 (20) link ifdown Link detected: yes With this change: % sudo ethtool enp3s0 Settings for enp3s0: Supported ports: [ FIBRE ] Supported link modes: 1000baseX/Full 10000baseCR/Full 10000baseSR/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: 1000baseX/Full 10000baseCR/Full 10000baseSR/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 10000Mb/s Duplex: Full Auto-negotiation: off Port: Direct Attach Copper PHYAD: 0 Transceiver: internal Supports Wake-on: d Wake-on: d Current message level: 0x00000014 (20) link ifdown Link detected: yes Tested-by: Michael Stapelberg <michael@stapelberg.ch> Signed-off-by: Erik Ekman <erik@kryo.se> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-28 13:37:11 +01:00
ETHTOOL_LINK_MODE_1000baseX_Full_BIT);
MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_1000BASE_KX, SPEED_1000,
ETHTOOL_LINK_MODE_1000baseKX_Full_BIT);
MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_10GBASE_T, SPEED_10000,
ETHTOOL_LINK_MODE_10000baseT_Full_BIT);
MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_10GBASE_CX4, SPEED_10000,
ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT);
MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_10GBASE_KX4, SPEED_10000,
ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT);
MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_10GBASE_KR, SPEED_10000,
ETHTOOL_LINK_MODE_10000baseKR_Full_BIT);
MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_10GBASE_CR, SPEED_10000,
net/mlx4_en: Update reported link modes for 1/10G When link modes were initially added in commit 2c762679435dc ("net/mlx4_en: Use PTYS register to query ethtool settings") and later updated for the new ethtool API in commit 3d8f7cc78d0eb ("net: mlx4: use new ETHTOOL_G/SSETTINGS API") the only 1/10G non-baseT link modes configured were 1000baseKX, 10000baseKX4 and 10000baseKR. It looks like these got picked to represent other modes since nothing better was available. Switch to using more specific link modes added in commit 5711a98221443 ("net: ethtool: add support for 1000BaseX and missing 10G link modes"). Tested with MCX311A-XCAT connected via DAC. Before: % sudo ethtool enp3s0 Settings for enp3s0: Supported ports: [ FIBRE ] Supported link modes: 1000baseKX/Full 10000baseKR/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: 1000baseKX/Full 10000baseKR/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 10000Mb/s Duplex: Full Auto-negotiation: off Port: Direct Attach Copper PHYAD: 0 Transceiver: internal Supports Wake-on: d Wake-on: d Current message level: 0x00000014 (20) link ifdown Link detected: yes With this change: % sudo ethtool enp3s0 Settings for enp3s0: Supported ports: [ FIBRE ] Supported link modes: 1000baseX/Full 10000baseCR/Full 10000baseSR/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: 1000baseX/Full 10000baseCR/Full 10000baseSR/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 10000Mb/s Duplex: Full Auto-negotiation: off Port: Direct Attach Copper PHYAD: 0 Transceiver: internal Supports Wake-on: d Wake-on: d Current message level: 0x00000014 (20) link ifdown Link detected: yes Tested-by: Michael Stapelberg <michael@stapelberg.ch> Signed-off-by: Erik Ekman <erik@kryo.se> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-28 13:37:11 +01:00
ETHTOOL_LINK_MODE_10000baseCR_Full_BIT);
MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_10GBASE_SR, SPEED_10000,
net/mlx4_en: Update reported link modes for 1/10G When link modes were initially added in commit 2c762679435dc ("net/mlx4_en: Use PTYS register to query ethtool settings") and later updated for the new ethtool API in commit 3d8f7cc78d0eb ("net: mlx4: use new ETHTOOL_G/SSETTINGS API") the only 1/10G non-baseT link modes configured were 1000baseKX, 10000baseKX4 and 10000baseKR. It looks like these got picked to represent other modes since nothing better was available. Switch to using more specific link modes added in commit 5711a98221443 ("net: ethtool: add support for 1000BaseX and missing 10G link modes"). Tested with MCX311A-XCAT connected via DAC. Before: % sudo ethtool enp3s0 Settings for enp3s0: Supported ports: [ FIBRE ] Supported link modes: 1000baseKX/Full 10000baseKR/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: 1000baseKX/Full 10000baseKR/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 10000Mb/s Duplex: Full Auto-negotiation: off Port: Direct Attach Copper PHYAD: 0 Transceiver: internal Supports Wake-on: d Wake-on: d Current message level: 0x00000014 (20) link ifdown Link detected: yes With this change: % sudo ethtool enp3s0 Settings for enp3s0: Supported ports: [ FIBRE ] Supported link modes: 1000baseX/Full 10000baseCR/Full 10000baseSR/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: 1000baseX/Full 10000baseCR/Full 10000baseSR/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 10000Mb/s Duplex: Full Auto-negotiation: off Port: Direct Attach Copper PHYAD: 0 Transceiver: internal Supports Wake-on: d Wake-on: d Current message level: 0x00000014 (20) link ifdown Link detected: yes Tested-by: Michael Stapelberg <michael@stapelberg.ch> Signed-off-by: Erik Ekman <erik@kryo.se> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-28 13:37:11 +01:00
ETHTOOL_LINK_MODE_10000baseSR_Full_BIT);
MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_20GBASE_KR2, SPEED_20000,
ETHTOOL_LINK_MODE_20000baseMLD2_Full_BIT,
ETHTOOL_LINK_MODE_20000baseKR2_Full_BIT);
MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_40GBASE_CR4, SPEED_40000,
ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT);
MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_40GBASE_KR4, SPEED_40000,
ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT);
MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_40GBASE_SR4, SPEED_40000,
ETHTOOL_LINK_MODE_40000baseSR4_Full_BIT);
MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_56GBASE_KR4, SPEED_56000,
ETHTOOL_LINK_MODE_56000baseKR4_Full_BIT);
MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_56GBASE_CR4, SPEED_56000,
ETHTOOL_LINK_MODE_56000baseCR4_Full_BIT);
MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_56GBASE_SR4, SPEED_56000,
ETHTOOL_LINK_MODE_56000baseSR4_Full_BIT);
};
static void ptys2ethtool_update_link_modes(unsigned long *link_modes,
u32 eth_proto,
enum ethtool_report report)
{
int i;
for (i = 0; i < MLX4_LINK_MODES_SZ; i++) {
if (eth_proto & MLX4_PROT_MASK(i))
net: convert users of bitmap_foo() to linkmode_foo() This converts instances of bitmap_foo(args..., __ETHTOOL_LINK_MODE_MASK_NBITS) to linkmode_foo(args...) I manually fixed up some lines to prevent them from being excessively long. Otherwise, this change was generated with the following semantic patch: // Generated with // echo linux/linkmode.h > includes // git grep -Flf includes include/ | cut -f 2- -d / | cat includes - \ // | sort | uniq | tee new_includes | wc -l && mv new_includes includes // and repeating until the number stopped going up @i@ @@ ( #include <linux/acpi_mdio.h> | #include <linux/brcmphy.h> | #include <linux/dsa/loop.h> | #include <linux/dsa/sja1105.h> | #include <linux/ethtool.h> | #include <linux/ethtool_netlink.h> | #include <linux/fec.h> | #include <linux/fs_enet_pd.h> | #include <linux/fsl/enetc_mdio.h> | #include <linux/fwnode_mdio.h> | #include <linux/linkmode.h> | #include <linux/lsm_audit.h> | #include <linux/mdio-bitbang.h> | #include <linux/mdio.h> | #include <linux/mdio-mux.h> | #include <linux/mii.h> | #include <linux/mii_timestamper.h> | #include <linux/mlx5/accel.h> | #include <linux/mlx5/cq.h> | #include <linux/mlx5/device.h> | #include <linux/mlx5/driver.h> | #include <linux/mlx5/eswitch.h> | #include <linux/mlx5/fs.h> | #include <linux/mlx5/port.h> | #include <linux/mlx5/qp.h> | #include <linux/mlx5/rsc_dump.h> | #include <linux/mlx5/transobj.h> | #include <linux/mlx5/vport.h> | #include <linux/of_mdio.h> | #include <linux/of_net.h> | #include <linux/pcs-lynx.h> | #include <linux/pcs/pcs-xpcs.h> | #include <linux/phy.h> | #include <linux/phy_led_triggers.h> | #include <linux/phylink.h> | #include <linux/platform_data/bcmgenet.h> | #include <linux/platform_data/xilinx-ll-temac.h> | #include <linux/pxa168_eth.h> | #include <linux/qed/qed_eth_if.h> | #include <linux/qed/qed_fcoe_if.h> | #include <linux/qed/qed_if.h> | #include <linux/qed/qed_iov_if.h> | #include <linux/qed/qed_iscsi_if.h> | #include <linux/qed/qed_ll2_if.h> | #include <linux/qed/qed_nvmetcp_if.h> | #include <linux/qed/qed_rdma_if.h> | #include <linux/sfp.h> | #include <linux/sh_eth.h> | #include <linux/smsc911x.h> | #include <linux/soc/nxp/lpc32xx-misc.h> | #include <linux/stmmac.h> | #include <linux/sunrpc/svc_rdma.h> | #include <linux/sxgbe_platform.h> | #include <net/cfg80211.h> | #include <net/dsa.h> | #include <net/mac80211.h> | #include <net/selftests.h> | #include <rdma/ib_addr.h> | #include <rdma/ib_cache.h> | #include <rdma/ib_cm.h> | #include <rdma/ib_hdrs.h> | #include <rdma/ib_mad.h> | #include <rdma/ib_marshall.h> | #include <rdma/ib_pack.h> | #include <rdma/ib_pma.h> | #include <rdma/ib_sa.h> | #include <rdma/ib_smi.h> | #include <rdma/ib_umem.h> | #include <rdma/ib_umem_odp.h> | #include <rdma/ib_verbs.h> | #include <rdma/iw_cm.h> | #include <rdma/mr_pool.h> | #include <rdma/opa_addr.h> | #include <rdma/opa_port_info.h> | #include <rdma/opa_smi.h> | #include <rdma/opa_vnic.h> | #include <rdma/rdma_cm.h> | #include <rdma/rdma_cm_ib.h> | #include <rdma/rdmavt_cq.h> | #include <rdma/rdma_vt.h> | #include <rdma/rdmavt_qp.h> | #include <rdma/rw.h> | #include <rdma/tid_rdma_defs.h> | #include <rdma/uverbs_ioctl.h> | #include <rdma/uverbs_named_ioctl.h> | #include <rdma/uverbs_std_types.h> | #include <rdma/uverbs_types.h> | #include <soc/mscc/ocelot.h> | #include <soc/mscc/ocelot_ptp.h> | #include <soc/mscc/ocelot_vcap.h> | #include <trace/events/ib_mad.h> | #include <trace/events/rdma_core.h> | #include <trace/events/rdma.h> | #include <trace/events/rpcrdma.h> | #include <uapi/linux/ethtool.h> | #include <uapi/linux/ethtool_netlink.h> | #include <uapi/linux/mdio.h> | #include <uapi/linux/mii.h> ) @depends on i@ expression list args; @@ ( - bitmap_zero(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_zero(args) | - bitmap_copy(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_copy(args) | - bitmap_and(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_and(args) | - bitmap_or(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_or(args) | - bitmap_empty(args, ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_empty(args) | - bitmap_andnot(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_andnot(args) | - bitmap_equal(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_equal(args) | - bitmap_intersects(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_intersects(args) | - bitmap_subset(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_subset(args) ) Add missing linux/mii.h include to mellanox. -DaveM Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-22 18:41:04 -04:00
linkmode_or(link_modes, link_modes,
ptys2ethtool_link_mode(&ptys2ethtool_map[i], report));
}
}
static u32 ethtool2ptys_link_modes(const unsigned long *link_modes,
enum ethtool_report report)
{
int i;
u32 ptys_modes = 0;
for (i = 0; i < MLX4_LINK_MODES_SZ; i++) {
net: convert users of bitmap_foo() to linkmode_foo() This converts instances of bitmap_foo(args..., __ETHTOOL_LINK_MODE_MASK_NBITS) to linkmode_foo(args...) I manually fixed up some lines to prevent them from being excessively long. Otherwise, this change was generated with the following semantic patch: // Generated with // echo linux/linkmode.h > includes // git grep -Flf includes include/ | cut -f 2- -d / | cat includes - \ // | sort | uniq | tee new_includes | wc -l && mv new_includes includes // and repeating until the number stopped going up @i@ @@ ( #include <linux/acpi_mdio.h> | #include <linux/brcmphy.h> | #include <linux/dsa/loop.h> | #include <linux/dsa/sja1105.h> | #include <linux/ethtool.h> | #include <linux/ethtool_netlink.h> | #include <linux/fec.h> | #include <linux/fs_enet_pd.h> | #include <linux/fsl/enetc_mdio.h> | #include <linux/fwnode_mdio.h> | #include <linux/linkmode.h> | #include <linux/lsm_audit.h> | #include <linux/mdio-bitbang.h> | #include <linux/mdio.h> | #include <linux/mdio-mux.h> | #include <linux/mii.h> | #include <linux/mii_timestamper.h> | #include <linux/mlx5/accel.h> | #include <linux/mlx5/cq.h> | #include <linux/mlx5/device.h> | #include <linux/mlx5/driver.h> | #include <linux/mlx5/eswitch.h> | #include <linux/mlx5/fs.h> | #include <linux/mlx5/port.h> | #include <linux/mlx5/qp.h> | #include <linux/mlx5/rsc_dump.h> | #include <linux/mlx5/transobj.h> | #include <linux/mlx5/vport.h> | #include <linux/of_mdio.h> | #include <linux/of_net.h> | #include <linux/pcs-lynx.h> | #include <linux/pcs/pcs-xpcs.h> | #include <linux/phy.h> | #include <linux/phy_led_triggers.h> | #include <linux/phylink.h> | #include <linux/platform_data/bcmgenet.h> | #include <linux/platform_data/xilinx-ll-temac.h> | #include <linux/pxa168_eth.h> | #include <linux/qed/qed_eth_if.h> | #include <linux/qed/qed_fcoe_if.h> | #include <linux/qed/qed_if.h> | #include <linux/qed/qed_iov_if.h> | #include <linux/qed/qed_iscsi_if.h> | #include <linux/qed/qed_ll2_if.h> | #include <linux/qed/qed_nvmetcp_if.h> | #include <linux/qed/qed_rdma_if.h> | #include <linux/sfp.h> | #include <linux/sh_eth.h> | #include <linux/smsc911x.h> | #include <linux/soc/nxp/lpc32xx-misc.h> | #include <linux/stmmac.h> | #include <linux/sunrpc/svc_rdma.h> | #include <linux/sxgbe_platform.h> | #include <net/cfg80211.h> | #include <net/dsa.h> | #include <net/mac80211.h> | #include <net/selftests.h> | #include <rdma/ib_addr.h> | #include <rdma/ib_cache.h> | #include <rdma/ib_cm.h> | #include <rdma/ib_hdrs.h> | #include <rdma/ib_mad.h> | #include <rdma/ib_marshall.h> | #include <rdma/ib_pack.h> | #include <rdma/ib_pma.h> | #include <rdma/ib_sa.h> | #include <rdma/ib_smi.h> | #include <rdma/ib_umem.h> | #include <rdma/ib_umem_odp.h> | #include <rdma/ib_verbs.h> | #include <rdma/iw_cm.h> | #include <rdma/mr_pool.h> | #include <rdma/opa_addr.h> | #include <rdma/opa_port_info.h> | #include <rdma/opa_smi.h> | #include <rdma/opa_vnic.h> | #include <rdma/rdma_cm.h> | #include <rdma/rdma_cm_ib.h> | #include <rdma/rdmavt_cq.h> | #include <rdma/rdma_vt.h> | #include <rdma/rdmavt_qp.h> | #include <rdma/rw.h> | #include <rdma/tid_rdma_defs.h> | #include <rdma/uverbs_ioctl.h> | #include <rdma/uverbs_named_ioctl.h> | #include <rdma/uverbs_std_types.h> | #include <rdma/uverbs_types.h> | #include <soc/mscc/ocelot.h> | #include <soc/mscc/ocelot_ptp.h> | #include <soc/mscc/ocelot_vcap.h> | #include <trace/events/ib_mad.h> | #include <trace/events/rdma_core.h> | #include <trace/events/rdma.h> | #include <trace/events/rpcrdma.h> | #include <uapi/linux/ethtool.h> | #include <uapi/linux/ethtool_netlink.h> | #include <uapi/linux/mdio.h> | #include <uapi/linux/mii.h> ) @depends on i@ expression list args; @@ ( - bitmap_zero(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_zero(args) | - bitmap_copy(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_copy(args) | - bitmap_and(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_and(args) | - bitmap_or(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_or(args) | - bitmap_empty(args, ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_empty(args) | - bitmap_andnot(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_andnot(args) | - bitmap_equal(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_equal(args) | - bitmap_intersects(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_intersects(args) | - bitmap_subset(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_subset(args) ) Add missing linux/mii.h include to mellanox. -DaveM Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-22 18:41:04 -04:00
ulong *map_mode = ptys2ethtool_link_mode(&ptys2ethtool_map[i],
report);
if (linkmode_intersects(map_mode, link_modes))
ptys_modes |= 1 << i;
}
return ptys_modes;
}
/* Convert actual speed (SPEED_XXX) to ptys link modes */
static u32 speed2ptys_link_modes(u32 speed)
{
int i;
u32 ptys_modes = 0;
for (i = 0; i < MLX4_LINK_MODES_SZ; i++) {
if (ptys2ethtool_map[i].speed == speed)
ptys_modes |= 1 << i;
}
return ptys_modes;
}
static int
ethtool_get_ptys_link_ksettings(struct net_device *dev,
struct ethtool_link_ksettings *link_ksettings)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
struct mlx4_ptys_reg ptys_reg;
u32 eth_proto;
int ret;
memset(&ptys_reg, 0, sizeof(ptys_reg));
ptys_reg.local_port = priv->port;
ptys_reg.proto_mask = MLX4_PTYS_EN;
ret = mlx4_ACCESS_PTYS_REG(priv->mdev->dev,
MLX4_ACCESS_REG_QUERY, &ptys_reg);
if (ret) {
en_warn(priv, "Failed to run mlx4_ACCESS_PTYS_REG status(%x)",
ret);
return ret;
}
en_dbg(DRV, priv, "ptys_reg.proto_mask %x\n",
ptys_reg.proto_mask);
en_dbg(DRV, priv, "ptys_reg.eth_proto_cap %x\n",
be32_to_cpu(ptys_reg.eth_proto_cap));
en_dbg(DRV, priv, "ptys_reg.eth_proto_admin %x\n",
be32_to_cpu(ptys_reg.eth_proto_admin));
en_dbg(DRV, priv, "ptys_reg.eth_proto_oper %x\n",
be32_to_cpu(ptys_reg.eth_proto_oper));
en_dbg(DRV, priv, "ptys_reg.eth_proto_lp_adv %x\n",
be32_to_cpu(ptys_reg.eth_proto_lp_adv));
/* reset supported/advertising masks */
ethtool_link_ksettings_zero_link_mode(link_ksettings, supported);
ethtool_link_ksettings_zero_link_mode(link_ksettings, advertising);
ptys2ethtool_update_supported_port(link_ksettings->link_modes.supported,
&ptys_reg);
eth_proto = be32_to_cpu(ptys_reg.eth_proto_cap);
ptys2ethtool_update_link_modes(link_ksettings->link_modes.supported,
eth_proto, SUPPORTED);
eth_proto = be32_to_cpu(ptys_reg.eth_proto_admin);
ptys2ethtool_update_link_modes(link_ksettings->link_modes.advertising,
eth_proto, ADVERTISED);
ethtool_link_ksettings_add_link_mode(link_ksettings, supported,
Pause);
ethtool_link_ksettings_add_link_mode(link_ksettings, supported,
Asym_Pause);
if (priv->prof->tx_pause)
ethtool_link_ksettings_add_link_mode(link_ksettings,
advertising, Pause);
if (priv->prof->tx_pause ^ priv->prof->rx_pause)
ethtool_link_ksettings_add_link_mode(link_ksettings,
advertising, Asym_Pause);
link_ksettings->base.port = ptys_get_active_port(&ptys_reg);
if (mlx4_en_autoneg_get(dev)) {
ethtool_link_ksettings_add_link_mode(link_ksettings,
supported, Autoneg);
ethtool_link_ksettings_add_link_mode(link_ksettings,
advertising, Autoneg);
}
link_ksettings->base.autoneg
= (priv->port_state.flags & MLX4_EN_PORT_ANC) ?
AUTONEG_ENABLE : AUTONEG_DISABLE;
eth_proto = be32_to_cpu(ptys_reg.eth_proto_lp_adv);
ethtool_link_ksettings_zero_link_mode(link_ksettings, lp_advertising);
ptys2ethtool_update_link_modes(
link_ksettings->link_modes.lp_advertising,
eth_proto, ADVERTISED);
if (priv->port_state.flags & MLX4_EN_PORT_ANC)
ethtool_link_ksettings_add_link_mode(link_ksettings,
lp_advertising, Autoneg);
link_ksettings->base.phy_address = 0;
link_ksettings->base.mdio_support = 0;
link_ksettings->base.eth_tp_mdix = ETH_TP_MDI_INVALID;
link_ksettings->base.eth_tp_mdix_ctrl = ETH_TP_MDI_AUTO;
return ret;
}
static void
ethtool_get_default_link_ksettings(
struct net_device *dev, struct ethtool_link_ksettings *link_ksettings)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
int trans_type;
link_ksettings->base.autoneg = AUTONEG_DISABLE;
ethtool_link_ksettings_zero_link_mode(link_ksettings, supported);
ethtool_link_ksettings_add_link_mode(link_ksettings, supported,
10000baseT_Full);
ethtool_link_ksettings_zero_link_mode(link_ksettings, advertising);
ethtool_link_ksettings_add_link_mode(link_ksettings, advertising,
10000baseT_Full);
trans_type = priv->port_state.transceiver;
if (trans_type > 0 && trans_type <= 0xC) {
link_ksettings->base.port = PORT_FIBRE;
ethtool_link_ksettings_add_link_mode(link_ksettings,
supported, FIBRE);
ethtool_link_ksettings_add_link_mode(link_ksettings,
advertising, FIBRE);
} else if (trans_type == 0x80 || trans_type == 0) {
link_ksettings->base.port = PORT_TP;
ethtool_link_ksettings_add_link_mode(link_ksettings,
supported, TP);
ethtool_link_ksettings_add_link_mode(link_ksettings,
advertising, TP);
} else {
link_ksettings->base.port = -1;
}
}
static int
mlx4_en_get_link_ksettings(struct net_device *dev,
struct ethtool_link_ksettings *link_ksettings)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
int ret = -EINVAL;
if (mlx4_en_QUERY_PORT(priv->mdev, priv->port))
return -ENOMEM;
en_dbg(DRV, priv, "query port state.flags ANC(%x) ANE(%x)\n",
priv->port_state.flags & MLX4_EN_PORT_ANC,
priv->port_state.flags & MLX4_EN_PORT_ANE);
if (priv->mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_ETH_PROT_CTRL)
ret = ethtool_get_ptys_link_ksettings(dev, link_ksettings);
if (ret) /* ETH PROT CRTL is not supported or PTYS CMD failed */
ethtool_get_default_link_ksettings(dev, link_ksettings);
if (netif_carrier_ok(dev)) {
link_ksettings->base.speed = priv->port_state.link_speed;
link_ksettings->base.duplex = DUPLEX_FULL;
} else {
link_ksettings->base.speed = SPEED_UNKNOWN;
link_ksettings->base.duplex = DUPLEX_UNKNOWN;
}
return 0;
}
/* Calculate PTYS admin according ethtool speed (SPEED_XXX) */
static __be32 speed_set_ptys_admin(struct mlx4_en_priv *priv, u32 speed,
__be32 proto_cap)
{
__be32 proto_admin = 0;
if (!speed) { /* Speed = 0 ==> Reset Link modes */
proto_admin = proto_cap;
en_info(priv, "Speed was set to 0, Reset advertised Link Modes to default (%x)\n",
be32_to_cpu(proto_cap));
} else {
u32 ptys_link_modes = speed2ptys_link_modes(speed);
proto_admin = cpu_to_be32(ptys_link_modes) & proto_cap;
en_info(priv, "Setting Speed to %d\n", speed);
}
return proto_admin;
}
static int
mlx4_en_set_link_ksettings(struct net_device *dev,
const struct ethtool_link_ksettings *link_ksettings)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
struct mlx4_ptys_reg ptys_reg;
__be32 proto_admin;
u8 cur_autoneg;
int ret;
u32 ptys_adv = ethtool2ptys_link_modes(
link_ksettings->link_modes.advertising, ADVERTISED);
const int speed = link_ksettings->base.speed;
en_dbg(DRV, priv,
"Set Speed=%d adv={%*pbl} autoneg=%d duplex=%d\n",
speed, __ETHTOOL_LINK_MODE_MASK_NBITS,
link_ksettings->link_modes.advertising,
link_ksettings->base.autoneg,
link_ksettings->base.duplex);
if (!(priv->mdev->dev->caps.flags2 &
MLX4_DEV_CAP_FLAG2_ETH_PROT_CTRL) ||
(link_ksettings->base.duplex == DUPLEX_HALF))
return -EINVAL;
memset(&ptys_reg, 0, sizeof(ptys_reg));
ptys_reg.local_port = priv->port;
ptys_reg.proto_mask = MLX4_PTYS_EN;
ret = mlx4_ACCESS_PTYS_REG(priv->mdev->dev,
MLX4_ACCESS_REG_QUERY, &ptys_reg);
if (ret) {
en_warn(priv, "Failed to QUERY mlx4_ACCESS_PTYS_REG status(%x)\n",
ret);
return 0;
}
cur_autoneg = ptys_reg.flags & MLX4_PTYS_AN_DISABLE_ADMIN ?
AUTONEG_DISABLE : AUTONEG_ENABLE;
if (link_ksettings->base.autoneg == AUTONEG_DISABLE) {
proto_admin = speed_set_ptys_admin(priv, speed,
ptys_reg.eth_proto_cap);
if ((be32_to_cpu(proto_admin) &
(MLX4_PROT_MASK(MLX4_1000BASE_CX_SGMII) |
MLX4_PROT_MASK(MLX4_1000BASE_KX))) &&
(ptys_reg.flags & MLX4_PTYS_AN_DISABLE_CAP))
ptys_reg.flags |= MLX4_PTYS_AN_DISABLE_ADMIN;
} else {
proto_admin = cpu_to_be32(ptys_adv);
ptys_reg.flags &= ~MLX4_PTYS_AN_DISABLE_ADMIN;
}
proto_admin &= ptys_reg.eth_proto_cap;
if (!proto_admin) {
en_warn(priv, "Not supported link mode(s) requested, check supported link modes.\n");
return -EINVAL; /* nothing to change due to bad input */
}
if ((proto_admin == ptys_reg.eth_proto_admin) &&
((ptys_reg.flags & MLX4_PTYS_AN_DISABLE_CAP) &&
(link_ksettings->base.autoneg == cur_autoneg)))
return 0; /* Nothing to change */
en_dbg(DRV, priv, "mlx4_ACCESS_PTYS_REG SET: ptys_reg.eth_proto_admin = 0x%x\n",
be32_to_cpu(proto_admin));
ptys_reg.eth_proto_admin = proto_admin;
ret = mlx4_ACCESS_PTYS_REG(priv->mdev->dev, MLX4_ACCESS_REG_WRITE,
&ptys_reg);
if (ret) {
en_warn(priv, "Failed to write mlx4_ACCESS_PTYS_REG eth_proto_admin(0x%x) status(0x%x)",
be32_to_cpu(ptys_reg.eth_proto_admin), ret);
return ret;
}
mutex_lock(&priv->mdev->state_lock);
if (priv->port_up) {
en_warn(priv, "Port link mode changed, restarting port...\n");
mlx4_en_stop_port(dev, 1);
if (mlx4_en_start_port(dev))
en_err(priv, "Failed restarting port %d\n", priv->port);
}
mutex_unlock(&priv->mdev->state_lock);
return 0;
}
static int mlx4_en_get_coalesce(struct net_device *dev,
struct ethtool_coalesce *coal,
struct kernel_ethtool_coalesce *kernel_coal,
struct netlink_ext_ack *extack)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
coal->tx_coalesce_usecs = priv->tx_usecs;
coal->tx_max_coalesced_frames = priv->tx_frames;
coal->tx_max_coalesced_frames_irq = priv->tx_work_limit;
coal->rx_coalesce_usecs = priv->rx_usecs;
coal->rx_max_coalesced_frames = priv->rx_frames;
coal->pkt_rate_low = priv->pkt_rate_low;
coal->rx_coalesce_usecs_low = priv->rx_usecs_low;
coal->pkt_rate_high = priv->pkt_rate_high;
coal->rx_coalesce_usecs_high = priv->rx_usecs_high;
coal->rate_sample_interval = priv->sample_interval;
coal->use_adaptive_rx_coalesce = priv->adaptive_rx_coal;
return 0;
}
static int mlx4_en_set_coalesce(struct net_device *dev,
struct ethtool_coalesce *coal,
struct kernel_ethtool_coalesce *kernel_coal,
struct netlink_ext_ack *extack)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
if (!coal->tx_max_coalesced_frames_irq)
return -EINVAL;
if (coal->tx_coalesce_usecs > MLX4_EN_MAX_COAL_TIME ||
coal->rx_coalesce_usecs > MLX4_EN_MAX_COAL_TIME ||
coal->rx_coalesce_usecs_low > MLX4_EN_MAX_COAL_TIME ||
coal->rx_coalesce_usecs_high > MLX4_EN_MAX_COAL_TIME) {
netdev_info(dev, "%s: maximum coalesce time supported is %d usecs\n",
__func__, MLX4_EN_MAX_COAL_TIME);
return -ERANGE;
}
if (coal->tx_max_coalesced_frames > MLX4_EN_MAX_COAL_PKTS ||
coal->rx_max_coalesced_frames > MLX4_EN_MAX_COAL_PKTS) {
netdev_info(dev, "%s: maximum coalesced frames supported is %d\n",
__func__, MLX4_EN_MAX_COAL_PKTS);
return -ERANGE;
}
priv->rx_frames = (coal->rx_max_coalesced_frames ==
MLX4_EN_AUTO_CONF) ?
MLX4_EN_RX_COAL_TARGET :
coal->rx_max_coalesced_frames;
priv->rx_usecs = (coal->rx_coalesce_usecs ==
MLX4_EN_AUTO_CONF) ?
MLX4_EN_RX_COAL_TIME :
coal->rx_coalesce_usecs;
/* Setting TX coalescing parameters */
if (coal->tx_coalesce_usecs != priv->tx_usecs ||
coal->tx_max_coalesced_frames != priv->tx_frames) {
priv->tx_usecs = coal->tx_coalesce_usecs;
priv->tx_frames = coal->tx_max_coalesced_frames;
}
/* Set adaptive coalescing params */
priv->pkt_rate_low = coal->pkt_rate_low;
priv->rx_usecs_low = coal->rx_coalesce_usecs_low;
priv->pkt_rate_high = coal->pkt_rate_high;
priv->rx_usecs_high = coal->rx_coalesce_usecs_high;
priv->sample_interval = coal->rate_sample_interval;
priv->adaptive_rx_coal = coal->use_adaptive_rx_coalesce;
priv->tx_work_limit = coal->tx_max_coalesced_frames_irq;
return mlx4_en_moderation_update(priv);
}
static int mlx4_en_set_pauseparam(struct net_device *dev,
struct ethtool_pauseparam *pause)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
struct mlx4_en_dev *mdev = priv->mdev;
u8 tx_pause, tx_ppp, rx_pause, rx_ppp;
int err;
if (pause->autoneg)
return -EINVAL;
tx_pause = !!(pause->tx_pause);
rx_pause = !!(pause->rx_pause);
rx_ppp = (tx_pause || rx_pause) ? 0 : priv->prof->rx_ppp;
tx_ppp = (tx_pause || rx_pause) ? 0 : priv->prof->tx_ppp;
err = mlx4_SET_PORT_general(mdev->dev, priv->port,
priv->rx_skb_size + ETH_FCS_LEN,
tx_pause, tx_ppp, rx_pause, rx_ppp);
if (err) {
en_err(priv, "Failed setting pause params, err = %d\n", err);
return err;
}
mlx4_en_update_pfc_stats_bitmap(mdev->dev, &priv->stats_bitmap,
rx_ppp, rx_pause, tx_ppp, tx_pause);
priv->prof->tx_pause = tx_pause;
priv->prof->rx_pause = rx_pause;
priv->prof->tx_ppp = tx_ppp;
priv->prof->rx_ppp = rx_ppp;
return err;
}
static void mlx4_en_get_pause_stats(struct net_device *dev,
struct ethtool_pause_stats *stats)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
struct bitmap_iterator it;
bitmap_iterator_init(&it, priv->stats_bitmap.bitmap, NUM_ALL_STATS);
spin_lock_bh(&priv->stats_lock);
if (test_bit(FLOW_PRIORITY_STATS_IDX_TX_FRAMES,
priv->stats_bitmap.bitmap))
stats->tx_pause_frames = priv->tx_flowstats.tx_pause;
if (test_bit(FLOW_PRIORITY_STATS_IDX_RX_FRAMES,
priv->stats_bitmap.bitmap))
stats->rx_pause_frames = priv->rx_flowstats.rx_pause;
spin_unlock_bh(&priv->stats_lock);
}
static void mlx4_en_get_pauseparam(struct net_device *dev,
struct ethtool_pauseparam *pause)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
pause->tx_pause = priv->prof->tx_pause;
pause->rx_pause = priv->prof->rx_pause;
}
static int mlx4_en_set_ringparam(struct net_device *dev,
struct ethtool_ringparam *param,
struct kernel_ethtool_ringparam *kernel_param,
struct netlink_ext_ack *extack)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
struct mlx4_en_dev *mdev = priv->mdev;
struct mlx4_en_port_profile new_prof;
struct mlx4_en_priv *tmp;
u32 rx_size, tx_size;
int port_up = 0;
int err = 0;
if (param->rx_jumbo_pending || param->rx_mini_pending)
return -EINVAL;
if (param->rx_pending < MLX4_EN_MIN_RX_SIZE) {
en_warn(priv, "%s: rx_pending (%d) < min (%d)\n",
__func__, param->rx_pending,
MLX4_EN_MIN_RX_SIZE);
return -EINVAL;
}
if (param->tx_pending < MLX4_EN_MIN_TX_SIZE) {
en_warn(priv, "%s: tx_pending (%d) < min (%lu)\n",
__func__, param->tx_pending,
MLX4_EN_MIN_TX_SIZE);
return -EINVAL;
}
rx_size = roundup_pow_of_two(param->rx_pending);
tx_size = roundup_pow_of_two(param->tx_pending);
if (rx_size == (priv->port_up ? priv->rx_ring[0]->actual_size :
priv->rx_ring[0]->size) &&
tx_size == priv->tx_ring[TX][0]->size)
return 0;
tmp = kzalloc(sizeof(*tmp), GFP_KERNEL);
if (!tmp)
return -ENOMEM;
mutex_lock(&mdev->state_lock);
memcpy(&new_prof, priv->prof, sizeof(struct mlx4_en_port_profile));
new_prof.tx_ring_size = tx_size;
new_prof.rx_ring_size = rx_size;
err = mlx4_en_try_alloc_resources(priv, tmp, &new_prof, true);
if (err)
goto out;
if (priv->port_up) {
port_up = 1;
mlx4_en_stop_port(dev, 1);
}
mlx4_en_safe_replace_resources(priv, tmp);
if (port_up) {
err = mlx4_en_start_port(dev);
if (err)
en_err(priv, "Failed starting port\n");
}
err = mlx4_en_moderation_update(priv);
out:
kfree(tmp);
mutex_unlock(&mdev->state_lock);
return err;
}
static void mlx4_en_get_ringparam(struct net_device *dev,
struct ethtool_ringparam *param,
struct kernel_ethtool_ringparam *kernel_param,
struct netlink_ext_ack *extack)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
memset(param, 0, sizeof(*param));
param->rx_max_pending = MLX4_EN_MAX_RX_SIZE;
param->tx_max_pending = MLX4_EN_MAX_TX_SIZE;
param->rx_pending = priv->port_up ?
priv->rx_ring[0]->actual_size : priv->rx_ring[0]->size;
param->tx_pending = priv->tx_ring[TX][0]->size;
}
static u32 mlx4_en_get_rxfh_indir_size(struct net_device *dev)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
net/mlx4_en: fix ethtool -x mlx4 RSS is limited to spread incoming packets to a power of two number of queues. An uniformly distibuted traffic would be split on queues 0 to N-1, N being a power of two, each queue having a 1/N weight. If number of RX queues is not a power of two, upper RX queues do not receive traffic. ethtool -x is lying, because it pretends some queues have higher weight. Before patch: lpaa24:~# ethtool -L eth1 rx 24 lpaa24:~# ethtool -x eth1 RX flow hash indirection table for eth1 with 24 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 10 11 12 13 14 15 16: 0 1 2 3 4 5 6 7 RSS hash key: e0:7c:3a:89:07:55:b6:58:69:cc:f4:e5:24:62:e3:25:88:6c:42:5b:d2:cb:9a:d2:e0:06:e1:dc:f9:09:a1:89:0f:a0:30:43:73:6f:0c:b6 If this information was correct, user space tools could expect queues 0 to 7 to receive twice more traffic than queues 8 to 15 After patch : lpaa24:~# ethtool -L eth1 rx 24 lpaa24:~# ethtool -x eth1 RX flow hash indirection table for eth1 with 24 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 10 11 12 13 14 15 RSS hash key: da:7b:09:60:f1:ac:67:b4:d0:72:d4:ec:a2:e5:80:0a:ad:50:22:1a:f8:f9:66:54:5f:22:45:c3:88:f4:57:82:c1:c1:90:ed:70:cb:40:ce lpaa24:~# ethtool -X eth1 equal 8 lpaa24:~# ethtool -x eth1 RX flow hash indirection table for eth1 with 24 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 0 1 2 3 4 5 6 7 RSS hash key: da:7b:09:60:f1:ac:67:b4:d0:72:d4:ec:a2:e5:80:0a:ad:50:22:1a:f8:f9:66:54:5f:22:45:c3:88:f4:57:82:c1:c1:90:ed:70:cb:40:ce Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Maciej Żenczykowski <maze@google.com> Cc: Eugenia Emantayev <eugenia@mellanox.com> Cc: Wei Wang <weiwan@google.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 21:24:18 -07:00
return rounddown_pow_of_two(priv->rx_ring_num);
}
static u32 mlx4_en_get_rxfh_key_size(struct net_device *netdev)
{
return MLX4_EN_RSS_KEY_SIZE;
}
static int mlx4_en_check_rxfh_func(struct net_device *dev, u8 hfunc)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
/* check if requested function is supported by the device */
if (hfunc == ETH_RSS_HASH_TOP) {
if (!(priv->mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_RSS_TOP))
return -EINVAL;
if (!(dev->features & NETIF_F_RXHASH))
en_warn(priv, "Toeplitz hash function should be used in conjunction with RX hashing for optimal performance\n");
return 0;
} else if (hfunc == ETH_RSS_HASH_XOR) {
if (!(priv->mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_RSS_XOR))
return -EINVAL;
if (dev->features & NETIF_F_RXHASH)
en_warn(priv, "Enabling both XOR Hash function and RX Hashing can limit RPS functionality\n");
return 0;
}
return -EINVAL;
}
ethtool: Support for configurable RSS hash function This patch extends the set/get_rxfh ethtool-options for getting or setting the RSS hash function. It modifies drivers implementation of set/get_rxfh accordingly. This change also delegates the responsibility of checking whether a modification to a certain RX flow hash parameter is supported to the driver implementation of set_rxfh. User-kernel API is done through the new hfunc bitmask field in the ethtool_rxfh struct. A bit set in the hfunc field is corresponding to an index in the new string-set ETH_SS_RSS_HASH_FUNCS. Got approval from most of the relevant driver maintainers that their driver is using Toeplitz, and for the few that didn't answered, also assumed it is Toeplitz. Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Ariel Elior <ariel.elior@qlogic.com> Cc: Prashant Sreedharan <prashant@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Cc: Hariprasad S <hariprasad@chelsio.com> Cc: Sathya Perla <sathya.perla@emulex.com> Cc: Subbu Seetharaman <subbu.seetharaman@emulex.com> Cc: Ajit Khaparde <ajit.khaparde@emulex.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: Carolyn Wyborny <carolyn.wyborny@intel.com> Cc: Don Skidmore <donald.c.skidmore@intel.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Matthew Vick <matthew.vick@intel.com> Cc: John Ronciak <john.ronciak@intel.com> Cc: Mitch Williams <mitch.a.williams@intel.com> Cc: Amir Vadai <amirv@mellanox.com> Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com> Cc: Shradha Shah <sshah@solarflare.com> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Cc: "VMware, Inc." <pv-drivers@vmware.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-02 18:12:10 +02:00
static int mlx4_en_get_rxfh(struct net_device *dev, u32 *ring_index, u8 *key,
u8 *hfunc)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
net/mlx4_en: fix ethtool -x mlx4 RSS is limited to spread incoming packets to a power of two number of queues. An uniformly distibuted traffic would be split on queues 0 to N-1, N being a power of two, each queue having a 1/N weight. If number of RX queues is not a power of two, upper RX queues do not receive traffic. ethtool -x is lying, because it pretends some queues have higher weight. Before patch: lpaa24:~# ethtool -L eth1 rx 24 lpaa24:~# ethtool -x eth1 RX flow hash indirection table for eth1 with 24 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 10 11 12 13 14 15 16: 0 1 2 3 4 5 6 7 RSS hash key: e0:7c:3a:89:07:55:b6:58:69:cc:f4:e5:24:62:e3:25:88:6c:42:5b:d2:cb:9a:d2:e0:06:e1:dc:f9:09:a1:89:0f:a0:30:43:73:6f:0c:b6 If this information was correct, user space tools could expect queues 0 to 7 to receive twice more traffic than queues 8 to 15 After patch : lpaa24:~# ethtool -L eth1 rx 24 lpaa24:~# ethtool -x eth1 RX flow hash indirection table for eth1 with 24 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 10 11 12 13 14 15 RSS hash key: da:7b:09:60:f1:ac:67:b4:d0:72:d4:ec:a2:e5:80:0a:ad:50:22:1a:f8:f9:66:54:5f:22:45:c3:88:f4:57:82:c1:c1:90:ed:70:cb:40:ce lpaa24:~# ethtool -X eth1 equal 8 lpaa24:~# ethtool -x eth1 RX flow hash indirection table for eth1 with 24 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 0 1 2 3 4 5 6 7 RSS hash key: da:7b:09:60:f1:ac:67:b4:d0:72:d4:ec:a2:e5:80:0a:ad:50:22:1a:f8:f9:66:54:5f:22:45:c3:88:f4:57:82:c1:c1:90:ed:70:cb:40:ce Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Maciej Żenczykowski <maze@google.com> Cc: Eugenia Emantayev <eugenia@mellanox.com> Cc: Wei Wang <weiwan@google.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 21:24:18 -07:00
u32 n = mlx4_en_get_rxfh_indir_size(dev);
u32 i, rss_rings;
net/mlx4_en: fix ethtool -x mlx4 RSS is limited to spread incoming packets to a power of two number of queues. An uniformly distibuted traffic would be split on queues 0 to N-1, N being a power of two, each queue having a 1/N weight. If number of RX queues is not a power of two, upper RX queues do not receive traffic. ethtool -x is lying, because it pretends some queues have higher weight. Before patch: lpaa24:~# ethtool -L eth1 rx 24 lpaa24:~# ethtool -x eth1 RX flow hash indirection table for eth1 with 24 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 10 11 12 13 14 15 16: 0 1 2 3 4 5 6 7 RSS hash key: e0:7c:3a:89:07:55:b6:58:69:cc:f4:e5:24:62:e3:25:88:6c:42:5b:d2:cb:9a:d2:e0:06:e1:dc:f9:09:a1:89:0f:a0:30:43:73:6f:0c:b6 If this information was correct, user space tools could expect queues 0 to 7 to receive twice more traffic than queues 8 to 15 After patch : lpaa24:~# ethtool -L eth1 rx 24 lpaa24:~# ethtool -x eth1 RX flow hash indirection table for eth1 with 24 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 10 11 12 13 14 15 RSS hash key: da:7b:09:60:f1:ac:67:b4:d0:72:d4:ec:a2:e5:80:0a:ad:50:22:1a:f8:f9:66:54:5f:22:45:c3:88:f4:57:82:c1:c1:90:ed:70:cb:40:ce lpaa24:~# ethtool -X eth1 equal 8 lpaa24:~# ethtool -x eth1 RX flow hash indirection table for eth1 with 24 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 0 1 2 3 4 5 6 7 RSS hash key: da:7b:09:60:f1:ac:67:b4:d0:72:d4:ec:a2:e5:80:0a:ad:50:22:1a:f8:f9:66:54:5f:22:45:c3:88:f4:57:82:c1:c1:90:ed:70:cb:40:ce Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Maciej Żenczykowski <maze@google.com> Cc: Eugenia Emantayev <eugenia@mellanox.com> Cc: Wei Wang <weiwan@google.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 21:24:18 -07:00
rss_rings = priv->prof->rss_rings ?: n;
rss_rings = rounddown_pow_of_two(rss_rings);
net/mlx4_en: fix ethtool -x mlx4 RSS is limited to spread incoming packets to a power of two number of queues. An uniformly distibuted traffic would be split on queues 0 to N-1, N being a power of two, each queue having a 1/N weight. If number of RX queues is not a power of two, upper RX queues do not receive traffic. ethtool -x is lying, because it pretends some queues have higher weight. Before patch: lpaa24:~# ethtool -L eth1 rx 24 lpaa24:~# ethtool -x eth1 RX flow hash indirection table for eth1 with 24 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 10 11 12 13 14 15 16: 0 1 2 3 4 5 6 7 RSS hash key: e0:7c:3a:89:07:55:b6:58:69:cc:f4:e5:24:62:e3:25:88:6c:42:5b:d2:cb:9a:d2:e0:06:e1:dc:f9:09:a1:89:0f:a0:30:43:73:6f:0c:b6 If this information was correct, user space tools could expect queues 0 to 7 to receive twice more traffic than queues 8 to 15 After patch : lpaa24:~# ethtool -L eth1 rx 24 lpaa24:~# ethtool -x eth1 RX flow hash indirection table for eth1 with 24 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 10 11 12 13 14 15 RSS hash key: da:7b:09:60:f1:ac:67:b4:d0:72:d4:ec:a2:e5:80:0a:ad:50:22:1a:f8:f9:66:54:5f:22:45:c3:88:f4:57:82:c1:c1:90:ed:70:cb:40:ce lpaa24:~# ethtool -X eth1 equal 8 lpaa24:~# ethtool -x eth1 RX flow hash indirection table for eth1 with 24 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 0 1 2 3 4 5 6 7 RSS hash key: da:7b:09:60:f1:ac:67:b4:d0:72:d4:ec:a2:e5:80:0a:ad:50:22:1a:f8:f9:66:54:5f:22:45:c3:88:f4:57:82:c1:c1:90:ed:70:cb:40:ce Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Maciej Żenczykowski <maze@google.com> Cc: Eugenia Emantayev <eugenia@mellanox.com> Cc: Wei Wang <weiwan@google.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 21:24:18 -07:00
for (i = 0; i < n; i++) {
ethtool: Support for configurable RSS hash function This patch extends the set/get_rxfh ethtool-options for getting or setting the RSS hash function. It modifies drivers implementation of set/get_rxfh accordingly. This change also delegates the responsibility of checking whether a modification to a certain RX flow hash parameter is supported to the driver implementation of set_rxfh. User-kernel API is done through the new hfunc bitmask field in the ethtool_rxfh struct. A bit set in the hfunc field is corresponding to an index in the new string-set ETH_SS_RSS_HASH_FUNCS. Got approval from most of the relevant driver maintainers that their driver is using Toeplitz, and for the few that didn't answered, also assumed it is Toeplitz. Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Ariel Elior <ariel.elior@qlogic.com> Cc: Prashant Sreedharan <prashant@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Cc: Hariprasad S <hariprasad@chelsio.com> Cc: Sathya Perla <sathya.perla@emulex.com> Cc: Subbu Seetharaman <subbu.seetharaman@emulex.com> Cc: Ajit Khaparde <ajit.khaparde@emulex.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: Carolyn Wyborny <carolyn.wyborny@intel.com> Cc: Don Skidmore <donald.c.skidmore@intel.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Matthew Vick <matthew.vick@intel.com> Cc: John Ronciak <john.ronciak@intel.com> Cc: Mitch Williams <mitch.a.williams@intel.com> Cc: Amir Vadai <amirv@mellanox.com> Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com> Cc: Shradha Shah <sshah@solarflare.com> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Cc: "VMware, Inc." <pv-drivers@vmware.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-02 18:12:10 +02:00
if (!ring_index)
break;
net/mlx4_en: fix ethtool -x mlx4 RSS is limited to spread incoming packets to a power of two number of queues. An uniformly distibuted traffic would be split on queues 0 to N-1, N being a power of two, each queue having a 1/N weight. If number of RX queues is not a power of two, upper RX queues do not receive traffic. ethtool -x is lying, because it pretends some queues have higher weight. Before patch: lpaa24:~# ethtool -L eth1 rx 24 lpaa24:~# ethtool -x eth1 RX flow hash indirection table for eth1 with 24 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 10 11 12 13 14 15 16: 0 1 2 3 4 5 6 7 RSS hash key: e0:7c:3a:89:07:55:b6:58:69:cc:f4:e5:24:62:e3:25:88:6c:42:5b:d2:cb:9a:d2:e0:06:e1:dc:f9:09:a1:89:0f:a0:30:43:73:6f:0c:b6 If this information was correct, user space tools could expect queues 0 to 7 to receive twice more traffic than queues 8 to 15 After patch : lpaa24:~# ethtool -L eth1 rx 24 lpaa24:~# ethtool -x eth1 RX flow hash indirection table for eth1 with 24 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 10 11 12 13 14 15 RSS hash key: da:7b:09:60:f1:ac:67:b4:d0:72:d4:ec:a2:e5:80:0a:ad:50:22:1a:f8:f9:66:54:5f:22:45:c3:88:f4:57:82:c1:c1:90:ed:70:cb:40:ce lpaa24:~# ethtool -X eth1 equal 8 lpaa24:~# ethtool -x eth1 RX flow hash indirection table for eth1 with 24 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 0 1 2 3 4 5 6 7 RSS hash key: da:7b:09:60:f1:ac:67:b4:d0:72:d4:ec:a2:e5:80:0a:ad:50:22:1a:f8:f9:66:54:5f:22:45:c3:88:f4:57:82:c1:c1:90:ed:70:cb:40:ce Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Maciej Żenczykowski <maze@google.com> Cc: Eugenia Emantayev <eugenia@mellanox.com> Cc: Wei Wang <weiwan@google.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 21:24:18 -07:00
ring_index[i] = i % rss_rings;
}
if (key)
memcpy(key, priv->rss_key, MLX4_EN_RSS_KEY_SIZE);
ethtool: Support for configurable RSS hash function This patch extends the set/get_rxfh ethtool-options for getting or setting the RSS hash function. It modifies drivers implementation of set/get_rxfh accordingly. This change also delegates the responsibility of checking whether a modification to a certain RX flow hash parameter is supported to the driver implementation of set_rxfh. User-kernel API is done through the new hfunc bitmask field in the ethtool_rxfh struct. A bit set in the hfunc field is corresponding to an index in the new string-set ETH_SS_RSS_HASH_FUNCS. Got approval from most of the relevant driver maintainers that their driver is using Toeplitz, and for the few that didn't answered, also assumed it is Toeplitz. Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Ariel Elior <ariel.elior@qlogic.com> Cc: Prashant Sreedharan <prashant@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Cc: Hariprasad S <hariprasad@chelsio.com> Cc: Sathya Perla <sathya.perla@emulex.com> Cc: Subbu Seetharaman <subbu.seetharaman@emulex.com> Cc: Ajit Khaparde <ajit.khaparde@emulex.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: Carolyn Wyborny <carolyn.wyborny@intel.com> Cc: Don Skidmore <donald.c.skidmore@intel.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Matthew Vick <matthew.vick@intel.com> Cc: John Ronciak <john.ronciak@intel.com> Cc: Mitch Williams <mitch.a.williams@intel.com> Cc: Amir Vadai <amirv@mellanox.com> Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com> Cc: Shradha Shah <sshah@solarflare.com> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Cc: "VMware, Inc." <pv-drivers@vmware.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-02 18:12:10 +02:00
if (hfunc)
*hfunc = priv->rss_hash_fn;
return 0;
}
static int mlx4_en_set_rxfh(struct net_device *dev, const u32 *ring_index,
ethtool: Support for configurable RSS hash function This patch extends the set/get_rxfh ethtool-options for getting or setting the RSS hash function. It modifies drivers implementation of set/get_rxfh accordingly. This change also delegates the responsibility of checking whether a modification to a certain RX flow hash parameter is supported to the driver implementation of set_rxfh. User-kernel API is done through the new hfunc bitmask field in the ethtool_rxfh struct. A bit set in the hfunc field is corresponding to an index in the new string-set ETH_SS_RSS_HASH_FUNCS. Got approval from most of the relevant driver maintainers that their driver is using Toeplitz, and for the few that didn't answered, also assumed it is Toeplitz. Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Ariel Elior <ariel.elior@qlogic.com> Cc: Prashant Sreedharan <prashant@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Cc: Hariprasad S <hariprasad@chelsio.com> Cc: Sathya Perla <sathya.perla@emulex.com> Cc: Subbu Seetharaman <subbu.seetharaman@emulex.com> Cc: Ajit Khaparde <ajit.khaparde@emulex.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: Carolyn Wyborny <carolyn.wyborny@intel.com> Cc: Don Skidmore <donald.c.skidmore@intel.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Matthew Vick <matthew.vick@intel.com> Cc: John Ronciak <john.ronciak@intel.com> Cc: Mitch Williams <mitch.a.williams@intel.com> Cc: Amir Vadai <amirv@mellanox.com> Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com> Cc: Shradha Shah <sshah@solarflare.com> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Cc: "VMware, Inc." <pv-drivers@vmware.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-02 18:12:10 +02:00
const u8 *key, const u8 hfunc)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
net/mlx4_en: fix ethtool -x mlx4 RSS is limited to spread incoming packets to a power of two number of queues. An uniformly distibuted traffic would be split on queues 0 to N-1, N being a power of two, each queue having a 1/N weight. If number of RX queues is not a power of two, upper RX queues do not receive traffic. ethtool -x is lying, because it pretends some queues have higher weight. Before patch: lpaa24:~# ethtool -L eth1 rx 24 lpaa24:~# ethtool -x eth1 RX flow hash indirection table for eth1 with 24 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 10 11 12 13 14 15 16: 0 1 2 3 4 5 6 7 RSS hash key: e0:7c:3a:89:07:55:b6:58:69:cc:f4:e5:24:62:e3:25:88:6c:42:5b:d2:cb:9a:d2:e0:06:e1:dc:f9:09:a1:89:0f:a0:30:43:73:6f:0c:b6 If this information was correct, user space tools could expect queues 0 to 7 to receive twice more traffic than queues 8 to 15 After patch : lpaa24:~# ethtool -L eth1 rx 24 lpaa24:~# ethtool -x eth1 RX flow hash indirection table for eth1 with 24 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 10 11 12 13 14 15 RSS hash key: da:7b:09:60:f1:ac:67:b4:d0:72:d4:ec:a2:e5:80:0a:ad:50:22:1a:f8:f9:66:54:5f:22:45:c3:88:f4:57:82:c1:c1:90:ed:70:cb:40:ce lpaa24:~# ethtool -X eth1 equal 8 lpaa24:~# ethtool -x eth1 RX flow hash indirection table for eth1 with 24 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 0 1 2 3 4 5 6 7 RSS hash key: da:7b:09:60:f1:ac:67:b4:d0:72:d4:ec:a2:e5:80:0a:ad:50:22:1a:f8:f9:66:54:5f:22:45:c3:88:f4:57:82:c1:c1:90:ed:70:cb:40:ce Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Maciej Żenczykowski <maze@google.com> Cc: Eugenia Emantayev <eugenia@mellanox.com> Cc: Wei Wang <weiwan@google.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 21:24:18 -07:00
u32 n = mlx4_en_get_rxfh_indir_size(dev);
struct mlx4_en_dev *mdev = priv->mdev;
int port_up = 0;
int err = 0;
int i;
int rss_rings = 0;
/* Calculate RSS table size and make sure flows are spread evenly
* between rings
*/
net/mlx4_en: fix ethtool -x mlx4 RSS is limited to spread incoming packets to a power of two number of queues. An uniformly distibuted traffic would be split on queues 0 to N-1, N being a power of two, each queue having a 1/N weight. If number of RX queues is not a power of two, upper RX queues do not receive traffic. ethtool -x is lying, because it pretends some queues have higher weight. Before patch: lpaa24:~# ethtool -L eth1 rx 24 lpaa24:~# ethtool -x eth1 RX flow hash indirection table for eth1 with 24 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 10 11 12 13 14 15 16: 0 1 2 3 4 5 6 7 RSS hash key: e0:7c:3a:89:07:55:b6:58:69:cc:f4:e5:24:62:e3:25:88:6c:42:5b:d2:cb:9a:d2:e0:06:e1:dc:f9:09:a1:89:0f:a0:30:43:73:6f:0c:b6 If this information was correct, user space tools could expect queues 0 to 7 to receive twice more traffic than queues 8 to 15 After patch : lpaa24:~# ethtool -L eth1 rx 24 lpaa24:~# ethtool -x eth1 RX flow hash indirection table for eth1 with 24 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 10 11 12 13 14 15 RSS hash key: da:7b:09:60:f1:ac:67:b4:d0:72:d4:ec:a2:e5:80:0a:ad:50:22:1a:f8:f9:66:54:5f:22:45:c3:88:f4:57:82:c1:c1:90:ed:70:cb:40:ce lpaa24:~# ethtool -X eth1 equal 8 lpaa24:~# ethtool -x eth1 RX flow hash indirection table for eth1 with 24 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 0 1 2 3 4 5 6 7 RSS hash key: da:7b:09:60:f1:ac:67:b4:d0:72:d4:ec:a2:e5:80:0a:ad:50:22:1a:f8:f9:66:54:5f:22:45:c3:88:f4:57:82:c1:c1:90:ed:70:cb:40:ce Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Maciej Żenczykowski <maze@google.com> Cc: Eugenia Emantayev <eugenia@mellanox.com> Cc: Wei Wang <weiwan@google.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 21:24:18 -07:00
for (i = 0; i < n; i++) {
if (!ring_index)
net/mlx4_en: fix ethtool -x mlx4 RSS is limited to spread incoming packets to a power of two number of queues. An uniformly distibuted traffic would be split on queues 0 to N-1, N being a power of two, each queue having a 1/N weight. If number of RX queues is not a power of two, upper RX queues do not receive traffic. ethtool -x is lying, because it pretends some queues have higher weight. Before patch: lpaa24:~# ethtool -L eth1 rx 24 lpaa24:~# ethtool -x eth1 RX flow hash indirection table for eth1 with 24 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 10 11 12 13 14 15 16: 0 1 2 3 4 5 6 7 RSS hash key: e0:7c:3a:89:07:55:b6:58:69:cc:f4:e5:24:62:e3:25:88:6c:42:5b:d2:cb:9a:d2:e0:06:e1:dc:f9:09:a1:89:0f:a0:30:43:73:6f:0c:b6 If this information was correct, user space tools could expect queues 0 to 7 to receive twice more traffic than queues 8 to 15 After patch : lpaa24:~# ethtool -L eth1 rx 24 lpaa24:~# ethtool -x eth1 RX flow hash indirection table for eth1 with 24 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 10 11 12 13 14 15 RSS hash key: da:7b:09:60:f1:ac:67:b4:d0:72:d4:ec:a2:e5:80:0a:ad:50:22:1a:f8:f9:66:54:5f:22:45:c3:88:f4:57:82:c1:c1:90:ed:70:cb:40:ce lpaa24:~# ethtool -X eth1 equal 8 lpaa24:~# ethtool -x eth1 RX flow hash indirection table for eth1 with 24 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 0 1 2 3 4 5 6 7 RSS hash key: da:7b:09:60:f1:ac:67:b4:d0:72:d4:ec:a2:e5:80:0a:ad:50:22:1a:f8:f9:66:54:5f:22:45:c3:88:f4:57:82:c1:c1:90:ed:70:cb:40:ce Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Maciej Żenczykowski <maze@google.com> Cc: Eugenia Emantayev <eugenia@mellanox.com> Cc: Wei Wang <weiwan@google.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 21:24:18 -07:00
break;
if (i > 0 && !ring_index[i] && !rss_rings)
rss_rings = i;
net/mlx4_en: fix ethtool -x mlx4 RSS is limited to spread incoming packets to a power of two number of queues. An uniformly distibuted traffic would be split on queues 0 to N-1, N being a power of two, each queue having a 1/N weight. If number of RX queues is not a power of two, upper RX queues do not receive traffic. ethtool -x is lying, because it pretends some queues have higher weight. Before patch: lpaa24:~# ethtool -L eth1 rx 24 lpaa24:~# ethtool -x eth1 RX flow hash indirection table for eth1 with 24 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 10 11 12 13 14 15 16: 0 1 2 3 4 5 6 7 RSS hash key: e0:7c:3a:89:07:55:b6:58:69:cc:f4:e5:24:62:e3:25:88:6c:42:5b:d2:cb:9a:d2:e0:06:e1:dc:f9:09:a1:89:0f:a0:30:43:73:6f:0c:b6 If this information was correct, user space tools could expect queues 0 to 7 to receive twice more traffic than queues 8 to 15 After patch : lpaa24:~# ethtool -L eth1 rx 24 lpaa24:~# ethtool -x eth1 RX flow hash indirection table for eth1 with 24 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 10 11 12 13 14 15 RSS hash key: da:7b:09:60:f1:ac:67:b4:d0:72:d4:ec:a2:e5:80:0a:ad:50:22:1a:f8:f9:66:54:5f:22:45:c3:88:f4:57:82:c1:c1:90:ed:70:cb:40:ce lpaa24:~# ethtool -X eth1 equal 8 lpaa24:~# ethtool -x eth1 RX flow hash indirection table for eth1 with 24 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 0 1 2 3 4 5 6 7 RSS hash key: da:7b:09:60:f1:ac:67:b4:d0:72:d4:ec:a2:e5:80:0a:ad:50:22:1a:f8:f9:66:54:5f:22:45:c3:88:f4:57:82:c1:c1:90:ed:70:cb:40:ce Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Maciej Żenczykowski <maze@google.com> Cc: Eugenia Emantayev <eugenia@mellanox.com> Cc: Wei Wang <weiwan@google.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 21:24:18 -07:00
if (ring_index[i] != (i % (rss_rings ?: n)))
return -EINVAL;
}
if (!rss_rings)
net/mlx4_en: fix ethtool -x mlx4 RSS is limited to spread incoming packets to a power of two number of queues. An uniformly distibuted traffic would be split on queues 0 to N-1, N being a power of two, each queue having a 1/N weight. If number of RX queues is not a power of two, upper RX queues do not receive traffic. ethtool -x is lying, because it pretends some queues have higher weight. Before patch: lpaa24:~# ethtool -L eth1 rx 24 lpaa24:~# ethtool -x eth1 RX flow hash indirection table for eth1 with 24 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 10 11 12 13 14 15 16: 0 1 2 3 4 5 6 7 RSS hash key: e0:7c:3a:89:07:55:b6:58:69:cc:f4:e5:24:62:e3:25:88:6c:42:5b:d2:cb:9a:d2:e0:06:e1:dc:f9:09:a1:89:0f:a0:30:43:73:6f:0c:b6 If this information was correct, user space tools could expect queues 0 to 7 to receive twice more traffic than queues 8 to 15 After patch : lpaa24:~# ethtool -L eth1 rx 24 lpaa24:~# ethtool -x eth1 RX flow hash indirection table for eth1 with 24 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 10 11 12 13 14 15 RSS hash key: da:7b:09:60:f1:ac:67:b4:d0:72:d4:ec:a2:e5:80:0a:ad:50:22:1a:f8:f9:66:54:5f:22:45:c3:88:f4:57:82:c1:c1:90:ed:70:cb:40:ce lpaa24:~# ethtool -X eth1 equal 8 lpaa24:~# ethtool -x eth1 RX flow hash indirection table for eth1 with 24 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 0 1 2 3 4 5 6 7 RSS hash key: da:7b:09:60:f1:ac:67:b4:d0:72:d4:ec:a2:e5:80:0a:ad:50:22:1a:f8:f9:66:54:5f:22:45:c3:88:f4:57:82:c1:c1:90:ed:70:cb:40:ce Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Maciej Żenczykowski <maze@google.com> Cc: Eugenia Emantayev <eugenia@mellanox.com> Cc: Wei Wang <weiwan@google.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 21:24:18 -07:00
rss_rings = n;
/* RSS table size must be an order of 2 */
if (!is_power_of_2(rss_rings))
return -EINVAL;
if (hfunc != ETH_RSS_HASH_NO_CHANGE) {
err = mlx4_en_check_rxfh_func(dev, hfunc);
if (err)
return err;
}
mutex_lock(&mdev->state_lock);
if (priv->port_up) {
port_up = 1;
mlx4_en_stop_port(dev, 1);
}
if (ring_index)
priv->prof->rss_rings = rss_rings;
if (key)
memcpy(priv->rss_key, key, MLX4_EN_RSS_KEY_SIZE);
if (hfunc != ETH_RSS_HASH_NO_CHANGE)
priv->rss_hash_fn = hfunc;
if (port_up) {
err = mlx4_en_start_port(dev);
if (err)
en_err(priv, "Failed starting port\n");
}
mutex_unlock(&mdev->state_lock);
return err;
}
#define all_zeros_or_all_ones(field) \
((field) == 0 || (field) == (__force typeof(field))-1)
static int mlx4_en_validate_flow(struct net_device *dev,
struct ethtool_rxnfc *cmd)
{
struct ethtool_usrip4_spec *l3_mask;
struct ethtool_tcpip4_spec *l4_mask;
struct ethhdr *eth_mask;
if (cmd->fs.location >= MAX_NUM_OF_FS_RULES)
return -EINVAL;
if (cmd->fs.flow_type & FLOW_MAC_EXT) {
/* dest mac mask must be ff:ff:ff:ff:ff:ff */
if (!is_broadcast_ether_addr(cmd->fs.m_ext.h_dest))
return -EINVAL;
}
switch (cmd->fs.flow_type & ~(FLOW_EXT | FLOW_MAC_EXT)) {
case TCP_V4_FLOW:
case UDP_V4_FLOW:
if (cmd->fs.m_u.tcp_ip4_spec.tos)
return -EINVAL;
l4_mask = &cmd->fs.m_u.tcp_ip4_spec;
/* don't allow mask which isn't all 0 or 1 */
if (!all_zeros_or_all_ones(l4_mask->ip4src) ||
!all_zeros_or_all_ones(l4_mask->ip4dst) ||
!all_zeros_or_all_ones(l4_mask->psrc) ||
!all_zeros_or_all_ones(l4_mask->pdst))
return -EINVAL;
break;
case IP_USER_FLOW:
l3_mask = &cmd->fs.m_u.usr_ip4_spec;
if (l3_mask->l4_4_bytes || l3_mask->tos || l3_mask->proto ||
cmd->fs.h_u.usr_ip4_spec.ip_ver != ETH_RX_NFC_IP4 ||
(!l3_mask->ip4src && !l3_mask->ip4dst) ||
!all_zeros_or_all_ones(l3_mask->ip4src) ||
!all_zeros_or_all_ones(l3_mask->ip4dst))
return -EINVAL;
break;
case ETHER_FLOW:
eth_mask = &cmd->fs.m_u.ether_spec;
/* source mac mask must not be set */
if (!is_zero_ether_addr(eth_mask->h_source))
return -EINVAL;
/* dest mac mask must be ff:ff:ff:ff:ff:ff */
if (!is_broadcast_ether_addr(eth_mask->h_dest))
return -EINVAL;
if (!all_zeros_or_all_ones(eth_mask->h_proto))
return -EINVAL;
break;
default:
return -EINVAL;
}
if ((cmd->fs.flow_type & FLOW_EXT)) {
if (cmd->fs.m_ext.vlan_etype ||
!((cmd->fs.m_ext.vlan_tci & cpu_to_be16(VLAN_VID_MASK)) ==
0 ||
(cmd->fs.m_ext.vlan_tci & cpu_to_be16(VLAN_VID_MASK)) ==
cpu_to_be16(VLAN_VID_MASK)))
return -EINVAL;
if (cmd->fs.m_ext.vlan_tci) {
if (be16_to_cpu(cmd->fs.h_ext.vlan_tci) >= VLAN_N_VID)
return -EINVAL;
}
}
return 0;
}
static int mlx4_en_ethtool_add_mac_rule(struct ethtool_rxnfc *cmd,
struct list_head *rule_list_h,
struct mlx4_spec_list *spec_l2,
unsigned char *mac)
{
__be64 mac_msk = cpu_to_be64(MLX4_MAC_MASK << 16);
spec_l2->id = MLX4_NET_TRANS_RULE_ID_ETH;
memcpy(spec_l2->eth.dst_mac_msk, &mac_msk, ETH_ALEN);
memcpy(spec_l2->eth.dst_mac, mac, ETH_ALEN);
if ((cmd->fs.flow_type & FLOW_EXT) &&
(cmd->fs.m_ext.vlan_tci & cpu_to_be16(VLAN_VID_MASK))) {
spec_l2->eth.vlan_id = cmd->fs.h_ext.vlan_tci;
spec_l2->eth.vlan_id_msk = cpu_to_be16(VLAN_VID_MASK);
}
list_add_tail(&spec_l2->list, rule_list_h);
return 0;
}
static int mlx4_en_ethtool_add_mac_rule_by_ipv4(struct mlx4_en_priv *priv,
struct ethtool_rxnfc *cmd,
struct list_head *rule_list_h,
struct mlx4_spec_list *spec_l2,
__be32 ipv4_dst)
{
#ifdef CONFIG_INET
unsigned char mac[ETH_ALEN];
if (!ipv4_is_multicast(ipv4_dst)) {
if (cmd->fs.flow_type & FLOW_MAC_EXT)
memcpy(&mac, cmd->fs.h_ext.h_dest, ETH_ALEN);
else
memcpy(&mac, priv->dev->dev_addr, ETH_ALEN);
} else {
ip_eth_mc_map(ipv4_dst, mac);
}
return mlx4_en_ethtool_add_mac_rule(cmd, rule_list_h, spec_l2, &mac[0]);
#else
return -EINVAL;
#endif
}
static int add_ip_rule(struct mlx4_en_priv *priv,
struct ethtool_rxnfc *cmd,
struct list_head *list_h)
{
int err;
struct mlx4_spec_list *spec_l2 = NULL;
struct mlx4_spec_list *spec_l3 = NULL;
struct ethtool_usrip4_spec *l3_mask = &cmd->fs.m_u.usr_ip4_spec;
spec_l3 = kzalloc(sizeof(*spec_l3), GFP_KERNEL);
spec_l2 = kzalloc(sizeof(*spec_l2), GFP_KERNEL);
if (!spec_l2 || !spec_l3) {
err = -ENOMEM;
goto free_spec;
}
err = mlx4_en_ethtool_add_mac_rule_by_ipv4(priv, cmd, list_h, spec_l2,
cmd->fs.h_u.
usr_ip4_spec.ip4dst);
if (err)
goto free_spec;
spec_l3->id = MLX4_NET_TRANS_RULE_ID_IPV4;
spec_l3->ipv4.src_ip = cmd->fs.h_u.usr_ip4_spec.ip4src;
if (l3_mask->ip4src)
spec_l3->ipv4.src_ip_msk = EN_ETHTOOL_WORD_MASK;
spec_l3->ipv4.dst_ip = cmd->fs.h_u.usr_ip4_spec.ip4dst;
if (l3_mask->ip4dst)
spec_l3->ipv4.dst_ip_msk = EN_ETHTOOL_WORD_MASK;
list_add_tail(&spec_l3->list, list_h);
return 0;
free_spec:
kfree(spec_l2);
kfree(spec_l3);
return err;
}
static int add_tcp_udp_rule(struct mlx4_en_priv *priv,
struct ethtool_rxnfc *cmd,
struct list_head *list_h, int proto)
{
int err;
struct mlx4_spec_list *spec_l2 = NULL;
struct mlx4_spec_list *spec_l3 = NULL;
struct mlx4_spec_list *spec_l4 = NULL;
struct ethtool_tcpip4_spec *l4_mask = &cmd->fs.m_u.tcp_ip4_spec;
spec_l2 = kzalloc(sizeof(*spec_l2), GFP_KERNEL);
spec_l3 = kzalloc(sizeof(*spec_l3), GFP_KERNEL);
spec_l4 = kzalloc(sizeof(*spec_l4), GFP_KERNEL);
if (!spec_l2 || !spec_l3 || !spec_l4) {
err = -ENOMEM;
goto free_spec;
}
spec_l3->id = MLX4_NET_TRANS_RULE_ID_IPV4;
if (proto == TCP_V4_FLOW) {
err = mlx4_en_ethtool_add_mac_rule_by_ipv4(priv, cmd, list_h,
spec_l2,
cmd->fs.h_u.
tcp_ip4_spec.ip4dst);
if (err)
goto free_spec;
spec_l4->id = MLX4_NET_TRANS_RULE_ID_TCP;
spec_l3->ipv4.src_ip = cmd->fs.h_u.tcp_ip4_spec.ip4src;
spec_l3->ipv4.dst_ip = cmd->fs.h_u.tcp_ip4_spec.ip4dst;
spec_l4->tcp_udp.src_port = cmd->fs.h_u.tcp_ip4_spec.psrc;
spec_l4->tcp_udp.dst_port = cmd->fs.h_u.tcp_ip4_spec.pdst;
} else {
err = mlx4_en_ethtool_add_mac_rule_by_ipv4(priv, cmd, list_h,
spec_l2,
cmd->fs.h_u.
udp_ip4_spec.ip4dst);
if (err)
goto free_spec;
spec_l4->id = MLX4_NET_TRANS_RULE_ID_UDP;
spec_l3->ipv4.src_ip = cmd->fs.h_u.udp_ip4_spec.ip4src;
spec_l3->ipv4.dst_ip = cmd->fs.h_u.udp_ip4_spec.ip4dst;
spec_l4->tcp_udp.src_port = cmd->fs.h_u.udp_ip4_spec.psrc;
spec_l4->tcp_udp.dst_port = cmd->fs.h_u.udp_ip4_spec.pdst;
}
if (l4_mask->ip4src)
spec_l3->ipv4.src_ip_msk = EN_ETHTOOL_WORD_MASK;
if (l4_mask->ip4dst)
spec_l3->ipv4.dst_ip_msk = EN_ETHTOOL_WORD_MASK;
if (l4_mask->psrc)
spec_l4->tcp_udp.src_port_msk = EN_ETHTOOL_SHORT_MASK;
if (l4_mask->pdst)
spec_l4->tcp_udp.dst_port_msk = EN_ETHTOOL_SHORT_MASK;
list_add_tail(&spec_l3->list, list_h);
list_add_tail(&spec_l4->list, list_h);
return 0;
free_spec:
kfree(spec_l2);
kfree(spec_l3);
kfree(spec_l4);
return err;
}
static int mlx4_en_ethtool_to_net_trans_rule(struct net_device *dev,
struct ethtool_rxnfc *cmd,
struct list_head *rule_list_h)
{
int err;
struct ethhdr *eth_spec;
struct mlx4_spec_list *spec_l2;
struct mlx4_en_priv *priv = netdev_priv(dev);
err = mlx4_en_validate_flow(dev, cmd);
if (err)
return err;
switch (cmd->fs.flow_type & ~(FLOW_EXT | FLOW_MAC_EXT)) {
case ETHER_FLOW:
spec_l2 = kzalloc(sizeof(*spec_l2), GFP_KERNEL);
if (!spec_l2)
return -ENOMEM;
eth_spec = &cmd->fs.h_u.ether_spec;
mlx4_en_ethtool_add_mac_rule(cmd, rule_list_h, spec_l2,
&eth_spec->h_dest[0]);
spec_l2->eth.ether_type = eth_spec->h_proto;
if (eth_spec->h_proto)
spec_l2->eth.ether_type_enable = 1;
break;
case IP_USER_FLOW:
err = add_ip_rule(priv, cmd, rule_list_h);
break;
case TCP_V4_FLOW:
err = add_tcp_udp_rule(priv, cmd, rule_list_h, TCP_V4_FLOW);
break;
case UDP_V4_FLOW:
err = add_tcp_udp_rule(priv, cmd, rule_list_h, UDP_V4_FLOW);
break;
}
return err;
}
static int mlx4_en_flow_replace(struct net_device *dev,
struct ethtool_rxnfc *cmd)
{
int err;
struct mlx4_en_priv *priv = netdev_priv(dev);
struct ethtool_flow_id *loc_rule;
struct mlx4_spec_list *spec, *tmp_spec;
u32 qpn;
u64 reg_id;
struct mlx4_net_trans_rule rule = {
.queue_mode = MLX4_NET_TRANS_Q_FIFO,
.exclusive = 0,
.allow_loopback = 1,
.promisc_mode = MLX4_FS_REGULAR,
};
rule.port = priv->port;
rule.priority = MLX4_DOMAIN_ETHTOOL | cmd->fs.location;
INIT_LIST_HEAD(&rule.list);
/* Allow direct QP attaches if the EN_ETHTOOL_QP_ATTACH flag is set */
if (cmd->fs.ring_cookie == RX_CLS_FLOW_DISC)
qpn = priv->drop_qp.qpn;
else if (cmd->fs.ring_cookie & EN_ETHTOOL_QP_ATTACH) {
qpn = cmd->fs.ring_cookie & (EN_ETHTOOL_QP_ATTACH - 1);
} else {
if (cmd->fs.ring_cookie >= priv->rx_ring_num) {
en_warn(priv, "rxnfc: RX ring (%llu) doesn't exist\n",
cmd->fs.ring_cookie);
return -EINVAL;
}
qpn = priv->rss_map.qps[cmd->fs.ring_cookie].qpn;
if (!qpn) {
en_warn(priv, "rxnfc: RX ring (%llu) is inactive\n",
cmd->fs.ring_cookie);
return -EINVAL;
}
}
rule.qpn = qpn;
err = mlx4_en_ethtool_to_net_trans_rule(dev, cmd, &rule.list);
if (err)
goto out_free_list;
loc_rule = &priv->ethtool_rules[cmd->fs.location];
if (loc_rule->id) {
err = mlx4_flow_detach(priv->mdev->dev, loc_rule->id);
if (err) {
en_err(priv, "Fail to detach network rule at location %d. registration id = %llx\n",
cmd->fs.location, loc_rule->id);
goto out_free_list;
}
loc_rule->id = 0;
memset(&loc_rule->flow_spec, 0,
sizeof(struct ethtool_rx_flow_spec));
list_del(&loc_rule->list);
}
err = mlx4_flow_attach(priv->mdev->dev, &rule, &reg_id);
if (err) {
en_err(priv, "Fail to attach network rule at location %d\n",
cmd->fs.location);
goto out_free_list;
}
loc_rule->id = reg_id;
memcpy(&loc_rule->flow_spec, &cmd->fs,
sizeof(struct ethtool_rx_flow_spec));
list_add_tail(&loc_rule->list, &priv->ethtool_list);
out_free_list:
list_for_each_entry_safe(spec, tmp_spec, &rule.list, list) {
list_del(&spec->list);
kfree(spec);
}
return err;
}
static int mlx4_en_flow_detach(struct net_device *dev,
struct ethtool_rxnfc *cmd)
{
int err = 0;
struct ethtool_flow_id *rule;
struct mlx4_en_priv *priv = netdev_priv(dev);
if (cmd->fs.location >= MAX_NUM_OF_FS_RULES)
return -EINVAL;
rule = &priv->ethtool_rules[cmd->fs.location];
if (!rule->id) {
err = -ENOENT;
goto out;
}
err = mlx4_flow_detach(priv->mdev->dev, rule->id);
if (err) {
en_err(priv, "Fail to detach network rule at location %d. registration id = 0x%llx\n",
cmd->fs.location, rule->id);
goto out;
}
rule->id = 0;
memset(&rule->flow_spec, 0, sizeof(struct ethtool_rx_flow_spec));
list_del(&rule->list);
out:
return err;
}
static int mlx4_en_get_flow(struct net_device *dev, struct ethtool_rxnfc *cmd,
int loc)
{
int err = 0;
struct ethtool_flow_id *rule;
struct mlx4_en_priv *priv = netdev_priv(dev);
if (loc < 0 || loc >= MAX_NUM_OF_FS_RULES)
return -EINVAL;
rule = &priv->ethtool_rules[loc];
if (rule->id)
memcpy(&cmd->fs, &rule->flow_spec,
sizeof(struct ethtool_rx_flow_spec));
else
err = -ENOENT;
return err;
}
static int mlx4_en_get_num_flows(struct mlx4_en_priv *priv)
{
int i, res = 0;
for (i = 0; i < MAX_NUM_OF_FS_RULES; i++) {
if (priv->ethtool_rules[i].id)
res++;
}
return res;
}
static int mlx4_en_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd,
u32 *rule_locs)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
struct mlx4_en_dev *mdev = priv->mdev;
int err = 0;
int i = 0, priority = 0;
if ((cmd->cmd == ETHTOOL_GRXCLSRLCNT ||
cmd->cmd == ETHTOOL_GRXCLSRULE ||
cmd->cmd == ETHTOOL_GRXCLSRLALL) &&
(mdev->dev->caps.steering_mode !=
MLX4_STEERING_MODE_DEVICE_MANAGED || !priv->port_up))
return -EINVAL;
switch (cmd->cmd) {
case ETHTOOL_GRXRINGS:
cmd->data = priv->rx_ring_num;
break;
case ETHTOOL_GRXCLSRLCNT:
cmd->rule_cnt = mlx4_en_get_num_flows(priv);
break;
case ETHTOOL_GRXCLSRULE:
err = mlx4_en_get_flow(dev, cmd, cmd->fs.location);
break;
case ETHTOOL_GRXCLSRLALL:
cmd->data = MAX_NUM_OF_FS_RULES;
while ((!err || err == -ENOENT) && priority < cmd->rule_cnt) {
err = mlx4_en_get_flow(dev, cmd, i);
if (!err)
rule_locs[priority++] = i;
i++;
}
err = 0;
break;
default:
err = -EOPNOTSUPP;
break;
}
return err;
}
static int mlx4_en_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd)
{
int err = 0;
struct mlx4_en_priv *priv = netdev_priv(dev);
struct mlx4_en_dev *mdev = priv->mdev;
if (mdev->dev->caps.steering_mode !=
MLX4_STEERING_MODE_DEVICE_MANAGED || !priv->port_up)
return -EINVAL;
switch (cmd->cmd) {
case ETHTOOL_SRXCLSRLINS:
err = mlx4_en_flow_replace(dev, cmd);
break;
case ETHTOOL_SRXCLSRLDEL:
err = mlx4_en_flow_detach(dev, cmd);
break;
default:
en_warn(priv, "Unsupported ethtool command. (%d)\n", cmd->cmd);
return -EINVAL;
}
return err;
}
static int mlx4_en_get_max_num_rx_rings(struct net_device *dev)
{
return min_t(int, num_online_cpus(), MAX_RX_RINGS);
}
static void mlx4_en_get_channels(struct net_device *dev,
struct ethtool_channels *channel)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
channel->max_rx = mlx4_en_get_max_num_rx_rings(dev);
channel->max_tx = priv->mdev->profile.max_num_tx_rings_p_up;
channel->rx_count = priv->rx_ring_num;
channel->tx_count = priv->tx_ring_num[TX] /
priv->prof->num_up;
}
static int mlx4_en_set_channels(struct net_device *dev,
struct ethtool_channels *channel)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
struct mlx4_en_dev *mdev = priv->mdev;
struct mlx4_en_port_profile new_prof;
struct mlx4_en_priv *tmp;
int total_tx_count;
int port_up = 0;
int xdp_count;
int err = 0;
u8 up;
if (!channel->tx_count || !channel->rx_count)
return -EINVAL;
tmp = kzalloc(sizeof(*tmp), GFP_KERNEL);
if (!tmp)
return -ENOMEM;
mutex_lock(&mdev->state_lock);
xdp_count = priv->tx_ring_num[TX_XDP] ? channel->rx_count : 0;
total_tx_count = channel->tx_count * priv->prof->num_up + xdp_count;
if (total_tx_count > MAX_TX_RINGS) {
err = -EINVAL;
en_err(priv,
"Total number of TX and XDP rings (%d) exceeds the maximum supported (%d)\n",
total_tx_count, MAX_TX_RINGS);
goto out;
}
memcpy(&new_prof, priv->prof, sizeof(struct mlx4_en_port_profile));
new_prof.num_tx_rings_p_up = channel->tx_count;
new_prof.tx_ring_num[TX] = channel->tx_count * priv->prof->num_up;
new_prof.tx_ring_num[TX_XDP] = xdp_count;
new_prof.rx_ring_num = channel->rx_count;
err = mlx4_en_try_alloc_resources(priv, tmp, &new_prof, true);
if (err)
goto out;
if (priv->port_up) {
port_up = 1;
mlx4_en_stop_port(dev, 1);
}
mlx4_en_safe_replace_resources(priv, tmp);
netif_set_real_num_rx_queues(dev, priv->rx_ring_num);
up = (priv->prof->num_up == MLX4_EN_NUM_UP_LOW) ?
0 : priv->prof->num_up;
mlx4_en_setup_tc(dev, up);
en_warn(priv, "Using %d TX rings\n", priv->tx_ring_num[TX]);
en_warn(priv, "Using %d RX rings\n", priv->rx_ring_num);
if (port_up) {
err = mlx4_en_start_port(dev);
if (err)
en_err(priv, "Failed starting port\n");
}
err = mlx4_en_moderation_update(priv);
out:
mutex_unlock(&mdev->state_lock);
kfree(tmp);
return err;
}
static int mlx4_en_get_ts_info(struct net_device *dev,
struct ethtool_ts_info *info)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
struct mlx4_en_dev *mdev = priv->mdev;
int ret;
ret = ethtool_op_get_ts_info(dev, info);
if (ret)
return ret;
if (mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_TS) {
info->so_timestamping |=
SOF_TIMESTAMPING_TX_HARDWARE |
SOF_TIMESTAMPING_RX_HARDWARE |
SOF_TIMESTAMPING_RAW_HARDWARE;
info->tx_types =
(1 << HWTSTAMP_TX_OFF) |
(1 << HWTSTAMP_TX_ON);
info->rx_filters =
(1 << HWTSTAMP_FILTER_NONE) |
(1 << HWTSTAMP_FILTER_ALL);
if (mdev->ptp_clock)
info->phc_index = ptp_clock_index(mdev->ptp_clock);
}
return ret;
}
static int mlx4_en_set_priv_flags(struct net_device *dev, u32 flags)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
struct mlx4_en_dev *mdev = priv->mdev;
bool bf_enabled_new = !!(flags & MLX4_EN_PRIV_FLAGS_BLUEFLAME);
bool bf_enabled_old = !!(priv->pflags & MLX4_EN_PRIV_FLAGS_BLUEFLAME);
bool phv_enabled_new = !!(flags & MLX4_EN_PRIV_FLAGS_PHV);
bool phv_enabled_old = !!(priv->pflags & MLX4_EN_PRIV_FLAGS_PHV);
int i;
int ret = 0;
if (bf_enabled_new != bf_enabled_old) {
int t;
if (bf_enabled_new) {
bool bf_supported = true;
for (t = 0; t < MLX4_EN_NUM_TX_TYPES; t++)
for (i = 0; i < priv->tx_ring_num[t]; i++)
bf_supported &=
priv->tx_ring[t][i]->bf_alloced;
if (!bf_supported) {
en_err(priv, "BlueFlame is not supported\n");
return -EINVAL;
}
priv->pflags |= MLX4_EN_PRIV_FLAGS_BLUEFLAME;
} else {
priv->pflags &= ~MLX4_EN_PRIV_FLAGS_BLUEFLAME;
}
for (t = 0; t < MLX4_EN_NUM_TX_TYPES; t++)
for (i = 0; i < priv->tx_ring_num[t]; i++)
priv->tx_ring[t][i]->bf_enabled =
bf_enabled_new;
en_info(priv, "BlueFlame %s\n",
bf_enabled_new ? "Enabled" : "Disabled");
}
if (phv_enabled_new != phv_enabled_old) {
ret = set_phv_bit(mdev->dev, priv->port, (int)phv_enabled_new);
if (ret)
return ret;
else if (phv_enabled_new)
priv->pflags |= MLX4_EN_PRIV_FLAGS_PHV;
else
priv->pflags &= ~MLX4_EN_PRIV_FLAGS_PHV;
en_info(priv, "PHV bit %s\n",
phv_enabled_new ? "Enabled" : "Disabled");
}
return 0;
}
static u32 mlx4_en_get_priv_flags(struct net_device *dev)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
return priv->pflags;
}
static int mlx4_en_get_tunable(struct net_device *dev,
const struct ethtool_tunable *tuna,
void *data)
{
const struct mlx4_en_priv *priv = netdev_priv(dev);
int ret = 0;
switch (tuna->id) {
case ETHTOOL_TX_COPYBREAK:
*(u32 *)data = priv->prof->inline_thold;
break;
default:
ret = -EINVAL;
break;
}
return ret;
}
static int mlx4_en_set_tunable(struct net_device *dev,
const struct ethtool_tunable *tuna,
const void *data)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
int val, ret = 0;
switch (tuna->id) {
case ETHTOOL_TX_COPYBREAK:
val = *(u32 *)data;
if (val < MIN_PKT_LEN || val > MAX_INLINE)
ret = -EINVAL;
else
priv->prof->inline_thold = val;
break;
default:
ret = -EINVAL;
break;
}
return ret;
}
static int mlx4_en_get_module_info(struct net_device *dev,
struct ethtool_modinfo *modinfo)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
struct mlx4_en_dev *mdev = priv->mdev;
int ret;
u8 data[4];
/* Read first 2 bytes to get Module & REV ID */
ret = mlx4_get_module_info(mdev->dev, priv->port,
0/*offset*/, 2/*size*/, data);
if (ret < 2)
return -EIO;
switch (data[0] /* identifier */) {
case MLX4_MODULE_ID_QSFP:
modinfo->type = ETH_MODULE_SFF_8436;
modinfo->eeprom_len = ETH_MODULE_SFF_8436_LEN;
break;
case MLX4_MODULE_ID_QSFP_PLUS:
if (data[1] >= 0x3) { /* revision id */
modinfo->type = ETH_MODULE_SFF_8636;
modinfo->eeprom_len = ETH_MODULE_SFF_8636_LEN;
} else {
modinfo->type = ETH_MODULE_SFF_8436;
modinfo->eeprom_len = ETH_MODULE_SFF_8436_LEN;
}
break;
case MLX4_MODULE_ID_QSFP28:
modinfo->type = ETH_MODULE_SFF_8636;
modinfo->eeprom_len = ETH_MODULE_SFF_8636_LEN;
break;
case MLX4_MODULE_ID_SFP:
modinfo->type = ETH_MODULE_SFF_8472;
modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
break;
default:
return -EINVAL;
}
return 0;
}
static int mlx4_en_get_module_eeprom(struct net_device *dev,
struct ethtool_eeprom *ee,
u8 *data)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
struct mlx4_en_dev *mdev = priv->mdev;
int offset = ee->offset;
int i = 0, ret;
if (ee->len == 0)
return -EINVAL;
memset(data, 0, ee->len);
while (i < ee->len) {
en_dbg(DRV, priv,
"mlx4_get_module_info i(%d) offset(%d) len(%d)\n",
i, offset, ee->len - i);
ret = mlx4_get_module_info(mdev->dev, priv->port,
offset, ee->len - i, data + i);
if (!ret) /* Done reading */
return 0;
if (ret < 0) {
en_err(priv,
"mlx4_get_module_info i(%d) offset(%d) bytes_to_read(%d) - FAILED (0x%x)\n",
i, offset, ee->len - i, ret);
return ret;
}
i += ret;
offset += ret;
}
return 0;
}
static int mlx4_en_set_phys_id(struct net_device *dev,
enum ethtool_phys_id_state state)
{
int err;
u16 beacon_duration;
struct mlx4_en_priv *priv = netdev_priv(dev);
struct mlx4_en_dev *mdev = priv->mdev;
if (!(mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_PORT_BEACON))
return -EOPNOTSUPP;
switch (state) {
case ETHTOOL_ID_ACTIVE:
beacon_duration = PORT_BEACON_MAX_LIMIT;
break;
case ETHTOOL_ID_INACTIVE:
beacon_duration = 0;
break;
default:
return -EOPNOTSUPP;
}
err = mlx4_SET_PORT_BEACON(mdev->dev, priv->port, beacon_duration);
return err;
}
const struct ethtool_ops mlx4_en_ethtool_ops = {
.supported_coalesce_params = ETHTOOL_COALESCE_USECS |
ETHTOOL_COALESCE_MAX_FRAMES |
ETHTOOL_COALESCE_TX_MAX_FRAMES_IRQ |
ETHTOOL_COALESCE_PKT_RATE_RX_USECS,
.get_drvinfo = mlx4_en_get_drvinfo,
.get_link_ksettings = mlx4_en_get_link_ksettings,
.set_link_ksettings = mlx4_en_set_link_ksettings,
.get_link = ethtool_op_get_link,
.get_strings = mlx4_en_get_strings,
.get_sset_count = mlx4_en_get_sset_count,
.get_ethtool_stats = mlx4_en_get_ethtool_stats,
.self_test = mlx4_en_self_test,
.set_phys_id = mlx4_en_set_phys_id,
.get_wol = mlx4_en_get_wol,
.set_wol = mlx4_en_set_wol,
.get_msglevel = mlx4_en_get_msglevel,
.set_msglevel = mlx4_en_set_msglevel,
.get_coalesce = mlx4_en_get_coalesce,
.set_coalesce = mlx4_en_set_coalesce,
.get_pause_stats = mlx4_en_get_pause_stats,
.get_pauseparam = mlx4_en_get_pauseparam,
.set_pauseparam = mlx4_en_set_pauseparam,
.get_ringparam = mlx4_en_get_ringparam,
.set_ringparam = mlx4_en_set_ringparam,
.get_rxnfc = mlx4_en_get_rxnfc,
.set_rxnfc = mlx4_en_set_rxnfc,
.get_rxfh_indir_size = mlx4_en_get_rxfh_indir_size,
.get_rxfh_key_size = mlx4_en_get_rxfh_key_size,
.get_rxfh = mlx4_en_get_rxfh,
.set_rxfh = mlx4_en_set_rxfh,
.get_channels = mlx4_en_get_channels,
.set_channels = mlx4_en_set_channels,
.get_ts_info = mlx4_en_get_ts_info,
.set_priv_flags = mlx4_en_set_priv_flags,
.get_priv_flags = mlx4_en_get_priv_flags,
.get_tunable = mlx4_en_get_tunable,
.set_tunable = mlx4_en_set_tunable,
.get_module_info = mlx4_en_get_module_info,
.get_module_eeprom = mlx4_en_get_module_eeprom
};