License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
|
|
|
#include <linux/slab.h>
|
2006-03-25 11:08:08 +00:00
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/bitops.h>
|
|
|
|
#include <linux/cpumask.h>
|
2011-11-17 02:29:17 +00:00
|
|
|
#include <linux/export.h>
|
2018-10-30 22:09:49 +00:00
|
|
|
#include <linux/memblock.h>
|
2019-03-05 23:42:58 +00:00
|
|
|
#include <linux/numa.h>
|
2020-06-25 22:34:41 +00:00
|
|
|
#include <linux/sched/isolation.h>
|
2006-03-25 11:08:08 +00:00
|
|
|
|
2017-09-08 23:17:15 +00:00
|
|
|
/**
|
|
|
|
* cpumask_next - get the next cpu in a cpumask
|
|
|
|
* @n: the cpu prior to the place to search (ie. return will be > @n)
|
|
|
|
* @srcp: the cpumask pointer
|
|
|
|
*
|
|
|
|
* Returns >= nr_cpu_ids if no further cpus set.
|
|
|
|
*/
|
|
|
|
unsigned int cpumask_next(int n, const struct cpumask *srcp)
|
|
|
|
{
|
|
|
|
/* -1 is a legal arg here. */
|
|
|
|
if (n != -1)
|
|
|
|
cpumask_check(n);
|
|
|
|
return find_next_bit(cpumask_bits(srcp), nr_cpumask_bits, n + 1);
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(cpumask_next);
|
|
|
|
|
2008-11-05 02:39:10 +00:00
|
|
|
/**
|
|
|
|
* cpumask_next_and - get the next cpu in *src1p & *src2p
|
|
|
|
* @n: the cpu prior to the place to search (ie. return will be > @n)
|
|
|
|
* @src1p: the first cpumask pointer
|
|
|
|
* @src2p: the second cpumask pointer
|
|
|
|
*
|
|
|
|
* Returns >= nr_cpu_ids if no further cpus set in both.
|
|
|
|
*/
|
|
|
|
int cpumask_next_and(int n, const struct cpumask *src1p,
|
|
|
|
const struct cpumask *src2p)
|
|
|
|
{
|
lib: optimize cpumask_next_and()
We've measured that we spend ~0.6% of sys cpu time in cpumask_next_and().
It's essentially a joined iteration in search for a non-zero bit, which is
currently implemented as a lookup join (find a nonzero bit on the lhs,
lookup the rhs to see if it's set there).
Implement a direct join (find a nonzero bit on the incrementally built
join). Also add generic bitmap benchmarks in the new `test_find_bit`
module for new function (see `find_next_and_bit` in [2] and [3] below).
For cpumask_next_and, direct benchmarking shows that it's 1.17x to 14x
faster with a geometric mean of 2.1 on 32 CPUs [1]. No impact on memory
usage. Note that on Arm, the new pure-C implementation still outperforms
the old one that uses a mix of C and asm (`find_next_bit`) [3].
[1] Approximate benchmark code:
```
unsigned long src1p[nr_cpumask_longs] = {pattern1};
unsigned long src2p[nr_cpumask_longs] = {pattern2};
for (/*a bunch of repetitions*/) {
for (int n = -1; n <= nr_cpu_ids; ++n) {
asm volatile("" : "+rm"(src1p)); // prevent any optimization
asm volatile("" : "+rm"(src2p));
unsigned long result = cpumask_next_and(n, src1p, src2p);
asm volatile("" : "+rm"(result));
}
}
```
Results:
pattern1 pattern2 time_before/time_after
0x0000ffff 0x0000ffff 1.65
0x0000ffff 0x00005555 2.24
0x0000ffff 0x00001111 2.94
0x0000ffff 0x00000000 14.0
0x00005555 0x0000ffff 1.67
0x00005555 0x00005555 1.71
0x00005555 0x00001111 1.90
0x00005555 0x00000000 6.58
0x00001111 0x0000ffff 1.46
0x00001111 0x00005555 1.49
0x00001111 0x00001111 1.45
0x00001111 0x00000000 3.10
0x00000000 0x0000ffff 1.18
0x00000000 0x00005555 1.18
0x00000000 0x00001111 1.17
0x00000000 0x00000000 1.25
-----------------------------
geo.mean 2.06
[2] test_find_next_bit, X86 (skylake)
[ 3913.477422] Start testing find_bit() with random-filled bitmap
[ 3913.477847] find_next_bit: 160868 cycles, 16484 iterations
[ 3913.477933] find_next_zero_bit: 169542 cycles, 16285 iterations
[ 3913.478036] find_last_bit: 201638 cycles, 16483 iterations
[ 3913.480214] find_first_bit: 4353244 cycles, 16484 iterations
[ 3913.480216] Start testing find_next_and_bit() with random-filled
bitmap
[ 3913.481074] find_next_and_bit: 89604 cycles, 8216 iterations
[ 3913.481075] Start testing find_bit() with sparse bitmap
[ 3913.481078] find_next_bit: 2536 cycles, 66 iterations
[ 3913.481252] find_next_zero_bit: 344404 cycles, 32703 iterations
[ 3913.481255] find_last_bit: 2006 cycles, 66 iterations
[ 3913.481265] find_first_bit: 17488 cycles, 66 iterations
[ 3913.481266] Start testing find_next_and_bit() with sparse bitmap
[ 3913.481272] find_next_and_bit: 764 cycles, 1 iterations
[3] test_find_next_bit, arm (v7 odroid XU3).
[ 267.206928] Start testing find_bit() with random-filled bitmap
[ 267.214752] find_next_bit: 4474 cycles, 16419 iterations
[ 267.221850] find_next_zero_bit: 5976 cycles, 16350 iterations
[ 267.229294] find_last_bit: 4209 cycles, 16419 iterations
[ 267.279131] find_first_bit: 1032991 cycles, 16420 iterations
[ 267.286265] Start testing find_next_and_bit() with random-filled
bitmap
[ 267.302386] find_next_and_bit: 2290 cycles, 8140 iterations
[ 267.309422] Start testing find_bit() with sparse bitmap
[ 267.316054] find_next_bit: 191 cycles, 66 iterations
[ 267.322726] find_next_zero_bit: 8758 cycles, 32703 iterations
[ 267.329803] find_last_bit: 84 cycles, 66 iterations
[ 267.336169] find_first_bit: 4118 cycles, 66 iterations
[ 267.342627] Start testing find_next_and_bit() with sparse bitmap
[ 267.356919] find_next_and_bit: 91 cycles, 1 iterations
[courbet@google.com: v6]
Link: http://lkml.kernel.org/r/20171129095715.23430-1-courbet@google.com
[geert@linux-m68k.org: m68k/bitops: always include <asm-generic/bitops/find.h>]
Link: http://lkml.kernel.org/r/1512556816-28627-1-git-send-email-geert@linux-m68k.org
Link: http://lkml.kernel.org/r/20171128131334.23491-1-courbet@google.com
Signed-off-by: Clement Courbet <courbet@google.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Yury Norov <ynorov@caviumnetworks.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06 23:38:34 +00:00
|
|
|
/* -1 is a legal arg here. */
|
|
|
|
if (n != -1)
|
|
|
|
cpumask_check(n);
|
|
|
|
return find_next_and_bit(cpumask_bits(src1p), cpumask_bits(src2p),
|
|
|
|
nr_cpumask_bits, n + 1);
|
2008-11-05 02:39:10 +00:00
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(cpumask_next_and);
|
|
|
|
|
|
|
|
/**
|
|
|
|
* cpumask_any_but - return a "random" in a cpumask, but not this one.
|
|
|
|
* @mask: the cpumask to search
|
|
|
|
* @cpu: the cpu to ignore.
|
|
|
|
*
|
|
|
|
* Often used to find any cpu but smp_processor_id() in a mask.
|
|
|
|
* Returns >= nr_cpu_ids if no cpus set.
|
|
|
|
*/
|
|
|
|
int cpumask_any_but(const struct cpumask *mask, unsigned int cpu)
|
|
|
|
{
|
|
|
|
unsigned int i;
|
|
|
|
|
2008-11-08 09:24:19 +00:00
|
|
|
cpumask_check(cpu);
|
2008-11-05 02:39:10 +00:00
|
|
|
for_each_cpu(i, mask)
|
|
|
|
if (i != cpu)
|
|
|
|
break;
|
|
|
|
return i;
|
|
|
|
}
|
2016-02-22 22:19:18 +00:00
|
|
|
EXPORT_SYMBOL(cpumask_any_but);
|
2008-11-05 02:39:10 +00:00
|
|
|
|
2017-04-14 12:20:05 +00:00
|
|
|
/**
|
|
|
|
* cpumask_next_wrap - helper to implement for_each_cpu_wrap
|
|
|
|
* @n: the cpu prior to the place to search
|
|
|
|
* @mask: the cpumask pointer
|
|
|
|
* @start: the start point of the iteration
|
|
|
|
* @wrap: assume @n crossing @start terminates the iteration
|
|
|
|
*
|
|
|
|
* Returns >= nr_cpu_ids on completion
|
|
|
|
*
|
|
|
|
* Note: the @wrap argument is required for the start condition when
|
|
|
|
* we cannot assume @start is set in @mask.
|
|
|
|
*/
|
|
|
|
int cpumask_next_wrap(int n, const struct cpumask *mask, int start, bool wrap)
|
|
|
|
{
|
|
|
|
int next;
|
|
|
|
|
|
|
|
again:
|
|
|
|
next = cpumask_next(n, mask);
|
|
|
|
|
|
|
|
if (wrap && n < start && next >= start) {
|
|
|
|
return nr_cpumask_bits;
|
|
|
|
|
|
|
|
} else if (next >= nr_cpumask_bits) {
|
|
|
|
wrap = true;
|
|
|
|
n = -1;
|
|
|
|
goto again;
|
|
|
|
}
|
|
|
|
|
|
|
|
return next;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(cpumask_next_wrap);
|
|
|
|
|
2008-11-05 02:39:10 +00:00
|
|
|
/* These are not inline because of header tangles. */
|
|
|
|
#ifdef CONFIG_CPUMASK_OFFSTACK
|
2008-12-19 06:26:52 +00:00
|
|
|
/**
|
|
|
|
* alloc_cpumask_var_node - allocate a struct cpumask on a given node
|
|
|
|
* @mask: pointer to cpumask_var_t where the cpumask is returned
|
|
|
|
* @flags: GFP_ flags
|
|
|
|
*
|
|
|
|
* Only defined when CONFIG_CPUMASK_OFFSTACK=y, otherwise is
|
|
|
|
* a nop returning a constant 1 (in <linux/cpumask.h>)
|
|
|
|
* Returns TRUE if memory allocation succeeded, FALSE otherwise.
|
|
|
|
*
|
|
|
|
* In addition, mask will be NULL if this fails. Note that gcc is
|
|
|
|
* usually smart enough to know that mask can never be NULL if
|
|
|
|
* CONFIG_CPUMASK_OFFSTACK=n, so does code elimination in that case
|
|
|
|
* too.
|
|
|
|
*/
|
2008-12-19 06:26:37 +00:00
|
|
|
bool alloc_cpumask_var_node(cpumask_var_t *mask, gfp_t flags, int node)
|
2008-11-05 02:39:10 +00:00
|
|
|
{
|
2009-05-25 12:10:58 +00:00
|
|
|
*mask = kmalloc_node(cpumask_size(), flags, node);
|
|
|
|
|
2008-11-05 02:39:10 +00:00
|
|
|
#ifdef CONFIG_DEBUG_PER_CPU_MAPS
|
|
|
|
if (!*mask) {
|
|
|
|
printk(KERN_ERR "=> alloc_cpumask_var: failed!\n");
|
|
|
|
dump_stack();
|
|
|
|
}
|
|
|
|
#endif
|
2008-12-31 23:42:30 +00:00
|
|
|
|
2008-11-05 02:39:10 +00:00
|
|
|
return *mask != NULL;
|
|
|
|
}
|
2008-12-19 06:26:37 +00:00
|
|
|
EXPORT_SYMBOL(alloc_cpumask_var_node);
|
|
|
|
|
2009-06-06 21:50:36 +00:00
|
|
|
bool zalloc_cpumask_var_node(cpumask_var_t *mask, gfp_t flags, int node)
|
|
|
|
{
|
|
|
|
return alloc_cpumask_var_node(mask, flags | __GFP_ZERO, node);
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(zalloc_cpumask_var_node);
|
|
|
|
|
2008-12-19 06:26:52 +00:00
|
|
|
/**
|
|
|
|
* alloc_cpumask_var - allocate a struct cpumask
|
|
|
|
* @mask: pointer to cpumask_var_t where the cpumask is returned
|
|
|
|
* @flags: GFP_ flags
|
|
|
|
*
|
|
|
|
* Only defined when CONFIG_CPUMASK_OFFSTACK=y, otherwise is
|
|
|
|
* a nop returning a constant 1 (in <linux/cpumask.h>).
|
|
|
|
*
|
|
|
|
* See alloc_cpumask_var_node.
|
|
|
|
*/
|
2008-12-19 06:26:37 +00:00
|
|
|
bool alloc_cpumask_var(cpumask_var_t *mask, gfp_t flags)
|
|
|
|
{
|
2011-07-26 23:08:44 +00:00
|
|
|
return alloc_cpumask_var_node(mask, flags, NUMA_NO_NODE);
|
2008-12-19 06:26:37 +00:00
|
|
|
}
|
2008-11-05 02:39:10 +00:00
|
|
|
EXPORT_SYMBOL(alloc_cpumask_var);
|
|
|
|
|
2009-06-06 21:50:36 +00:00
|
|
|
bool zalloc_cpumask_var(cpumask_var_t *mask, gfp_t flags)
|
|
|
|
{
|
|
|
|
return alloc_cpumask_var(mask, flags | __GFP_ZERO);
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(zalloc_cpumask_var);
|
|
|
|
|
2008-12-19 06:26:52 +00:00
|
|
|
/**
|
|
|
|
* alloc_bootmem_cpumask_var - allocate a struct cpumask from the bootmem arena.
|
|
|
|
* @mask: pointer to cpumask_var_t where the cpumask is returned
|
|
|
|
*
|
|
|
|
* Only defined when CONFIG_CPUMASK_OFFSTACK=y, otherwise is
|
2008-12-31 08:45:50 +00:00
|
|
|
* a nop (in <linux/cpumask.h>).
|
2008-12-19 06:26:52 +00:00
|
|
|
* Either returns an allocated (zero-filled) cpumask, or causes the
|
|
|
|
* system to panic.
|
|
|
|
*/
|
2008-11-05 02:39:10 +00:00
|
|
|
void __init alloc_bootmem_cpumask_var(cpumask_var_t *mask)
|
|
|
|
{
|
memblock: stop using implicit alignment to SMP_CACHE_BYTES
When a memblock allocation APIs are called with align = 0, the alignment
is implicitly set to SMP_CACHE_BYTES.
Implicit alignment is done deep in the memblock allocator and it can
come as a surprise. Not that such an alignment would be wrong even
when used incorrectly but it is better to be explicit for the sake of
clarity and the prinicple of the least surprise.
Replace all such uses of memblock APIs with the 'align' parameter
explicitly set to SMP_CACHE_BYTES and stop implicit alignment assignment
in the memblock internal allocation functions.
For the case when memblock APIs are used via helper functions, e.g. like
iommu_arena_new_node() in Alpha, the helper functions were detected with
Coccinelle's help and then manually examined and updated where
appropriate.
The direct memblock APIs users were updated using the semantic patch below:
@@
expression size, min_addr, max_addr, nid;
@@
(
|
- memblock_alloc_try_nid_raw(size, 0, min_addr, max_addr, nid)
+ memblock_alloc_try_nid_raw(size, SMP_CACHE_BYTES, min_addr, max_addr,
nid)
|
- memblock_alloc_try_nid_nopanic(size, 0, min_addr, max_addr, nid)
+ memblock_alloc_try_nid_nopanic(size, SMP_CACHE_BYTES, min_addr, max_addr,
nid)
|
- memblock_alloc_try_nid(size, 0, min_addr, max_addr, nid)
+ memblock_alloc_try_nid(size, SMP_CACHE_BYTES, min_addr, max_addr, nid)
|
- memblock_alloc(size, 0)
+ memblock_alloc(size, SMP_CACHE_BYTES)
|
- memblock_alloc_raw(size, 0)
+ memblock_alloc_raw(size, SMP_CACHE_BYTES)
|
- memblock_alloc_from(size, 0, min_addr)
+ memblock_alloc_from(size, SMP_CACHE_BYTES, min_addr)
|
- memblock_alloc_nopanic(size, 0)
+ memblock_alloc_nopanic(size, SMP_CACHE_BYTES)
|
- memblock_alloc_low(size, 0)
+ memblock_alloc_low(size, SMP_CACHE_BYTES)
|
- memblock_alloc_low_nopanic(size, 0)
+ memblock_alloc_low_nopanic(size, SMP_CACHE_BYTES)
|
- memblock_alloc_from_nopanic(size, 0, min_addr)
+ memblock_alloc_from_nopanic(size, SMP_CACHE_BYTES, min_addr)
|
- memblock_alloc_node(size, 0, nid)
+ memblock_alloc_node(size, SMP_CACHE_BYTES, nid)
)
[mhocko@suse.com: changelog update]
[akpm@linux-foundation.org: coding-style fixes]
[rppt@linux.ibm.com: fix missed uses of implicit alignment]
Link: http://lkml.kernel.org/r/20181016133656.GA10925@rapoport-lnx
Link: http://lkml.kernel.org/r/1538687224-17535-1-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Paul Burton <paul.burton@mips.com> [MIPS]
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 22:09:57 +00:00
|
|
|
*mask = memblock_alloc(cpumask_size(), SMP_CACHE_BYTES);
|
2019-03-12 06:30:31 +00:00
|
|
|
if (!*mask)
|
|
|
|
panic("%s: Failed to allocate %u bytes\n", __func__,
|
|
|
|
cpumask_size());
|
2008-11-05 02:39:10 +00:00
|
|
|
}
|
|
|
|
|
2008-12-19 06:26:52 +00:00
|
|
|
/**
|
|
|
|
* free_cpumask_var - frees memory allocated for a struct cpumask.
|
|
|
|
* @mask: cpumask to free
|
|
|
|
*
|
|
|
|
* This is safe on a NULL mask.
|
|
|
|
*/
|
2008-11-05 02:39:10 +00:00
|
|
|
void free_cpumask_var(cpumask_var_t mask)
|
|
|
|
{
|
|
|
|
kfree(mask);
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(free_cpumask_var);
|
2008-11-07 00:12:29 +00:00
|
|
|
|
2008-12-19 06:26:52 +00:00
|
|
|
/**
|
|
|
|
* free_bootmem_cpumask_var - frees result of alloc_bootmem_cpumask_var
|
|
|
|
* @mask: cpumask to free
|
|
|
|
*/
|
2008-11-08 09:24:19 +00:00
|
|
|
void __init free_bootmem_cpumask_var(cpumask_var_t mask)
|
2008-11-07 00:12:29 +00:00
|
|
|
{
|
2014-01-21 23:50:32 +00:00
|
|
|
memblock_free_early(__pa(mask), cpumask_size());
|
2008-11-07 00:12:29 +00:00
|
|
|
}
|
2008-11-05 02:39:10 +00:00
|
|
|
#endif
|
cpumask: Utility function to set n'th cpu - local cpu first
This function sets the n'th cpu - local cpu's first.
For example: in a 16 cores server with even cpu's local, will get the
following values:
cpumask_set_cpu_local_first(0, numa, cpumask) => cpu 0 is set
cpumask_set_cpu_local_first(1, numa, cpumask) => cpu 2 is set
...
cpumask_set_cpu_local_first(7, numa, cpumask) => cpu 14 is set
cpumask_set_cpu_local_first(8, numa, cpumask) => cpu 1 is set
cpumask_set_cpu_local_first(9, numa, cpumask) => cpu 3 is set
...
cpumask_set_cpu_local_first(15, numa, cpumask) => cpu 15 is set
Curently this function will be used by multi queue networking devices to
calculate the irq affinity mask, such that as many local cpu's as
possible will be utilized to handle the mq device irq's.
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-09 07:24:38 +00:00
|
|
|
|
|
|
|
/**
|
cpumask_set_cpu_local_first => cpumask_local_spread, lament
da91309e0a7e (cpumask: Utility function to set n'th cpu...) created a
genuinely weird function. I never saw it before, it went through DaveM.
(He only does this to make us other maintainers feel better about our own
mistakes.)
cpumask_set_cpu_local_first's purpose is say "I need to spread things
across N online cpus, choose the ones on this numa node first"; you call
it in a loop.
It can fail. One of the two callers ignores this, the other aborts and
fails the device open.
It can fail in two ways: allocating the off-stack cpumask, or through a
convoluted codepath which AFAICT can only occur if cpu_online_mask
changes. Which shouldn't happen, because if cpu_online_mask can change
while you call this, it could return a now-offline cpu anyway.
It contains a nonsensical test "!cpumask_of_node(numa_node)". This was
drawn to my attention by Geert, who said this causes a warning on Sparc.
It sets a single bit in a cpumask instead of returning a cpu number,
because that's what the callers want.
It could be made more efficient by passing the previous cpu rather than
an index, but that would be more invasive to the callers.
Fixes: da91309e0a7e8966d916a74cce42ed170fde06bf
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (then rebased)
Tested-by: Amir Vadai <amirv@mellanox.com>
Acked-by: Amir Vadai <amirv@mellanox.com>
Acked-by: David S. Miller <davem@davemloft.net>
2015-05-08 17:44:13 +00:00
|
|
|
* cpumask_local_spread - select the i'th cpu with local numa cpu's first
|
cpumask: Utility function to set n'th cpu - local cpu first
This function sets the n'th cpu - local cpu's first.
For example: in a 16 cores server with even cpu's local, will get the
following values:
cpumask_set_cpu_local_first(0, numa, cpumask) => cpu 0 is set
cpumask_set_cpu_local_first(1, numa, cpumask) => cpu 2 is set
...
cpumask_set_cpu_local_first(7, numa, cpumask) => cpu 14 is set
cpumask_set_cpu_local_first(8, numa, cpumask) => cpu 1 is set
cpumask_set_cpu_local_first(9, numa, cpumask) => cpu 3 is set
...
cpumask_set_cpu_local_first(15, numa, cpumask) => cpu 15 is set
Curently this function will be used by multi queue networking devices to
calculate the irq affinity mask, such that as many local cpu's as
possible will be utilized to handle the mq device irq's.
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-09 07:24:38 +00:00
|
|
|
* @i: index number
|
cpumask_set_cpu_local_first => cpumask_local_spread, lament
da91309e0a7e (cpumask: Utility function to set n'th cpu...) created a
genuinely weird function. I never saw it before, it went through DaveM.
(He only does this to make us other maintainers feel better about our own
mistakes.)
cpumask_set_cpu_local_first's purpose is say "I need to spread things
across N online cpus, choose the ones on this numa node first"; you call
it in a loop.
It can fail. One of the two callers ignores this, the other aborts and
fails the device open.
It can fail in two ways: allocating the off-stack cpumask, or through a
convoluted codepath which AFAICT can only occur if cpu_online_mask
changes. Which shouldn't happen, because if cpu_online_mask can change
while you call this, it could return a now-offline cpu anyway.
It contains a nonsensical test "!cpumask_of_node(numa_node)". This was
drawn to my attention by Geert, who said this causes a warning on Sparc.
It sets a single bit in a cpumask instead of returning a cpu number,
because that's what the callers want.
It could be made more efficient by passing the previous cpu rather than
an index, but that would be more invasive to the callers.
Fixes: da91309e0a7e8966d916a74cce42ed170fde06bf
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (then rebased)
Tested-by: Amir Vadai <amirv@mellanox.com>
Acked-by: Amir Vadai <amirv@mellanox.com>
Acked-by: David S. Miller <davem@davemloft.net>
2015-05-08 17:44:13 +00:00
|
|
|
* @node: local numa_node
|
cpumask: Utility function to set n'th cpu - local cpu first
This function sets the n'th cpu - local cpu's first.
For example: in a 16 cores server with even cpu's local, will get the
following values:
cpumask_set_cpu_local_first(0, numa, cpumask) => cpu 0 is set
cpumask_set_cpu_local_first(1, numa, cpumask) => cpu 2 is set
...
cpumask_set_cpu_local_first(7, numa, cpumask) => cpu 14 is set
cpumask_set_cpu_local_first(8, numa, cpumask) => cpu 1 is set
cpumask_set_cpu_local_first(9, numa, cpumask) => cpu 3 is set
...
cpumask_set_cpu_local_first(15, numa, cpumask) => cpu 15 is set
Curently this function will be used by multi queue networking devices to
calculate the irq affinity mask, such that as many local cpu's as
possible will be utilized to handle the mq device irq's.
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-09 07:24:38 +00:00
|
|
|
*
|
cpumask_set_cpu_local_first => cpumask_local_spread, lament
da91309e0a7e (cpumask: Utility function to set n'th cpu...) created a
genuinely weird function. I never saw it before, it went through DaveM.
(He only does this to make us other maintainers feel better about our own
mistakes.)
cpumask_set_cpu_local_first's purpose is say "I need to spread things
across N online cpus, choose the ones on this numa node first"; you call
it in a loop.
It can fail. One of the two callers ignores this, the other aborts and
fails the device open.
It can fail in two ways: allocating the off-stack cpumask, or through a
convoluted codepath which AFAICT can only occur if cpu_online_mask
changes. Which shouldn't happen, because if cpu_online_mask can change
while you call this, it could return a now-offline cpu anyway.
It contains a nonsensical test "!cpumask_of_node(numa_node)". This was
drawn to my attention by Geert, who said this causes a warning on Sparc.
It sets a single bit in a cpumask instead of returning a cpu number,
because that's what the callers want.
It could be made more efficient by passing the previous cpu rather than
an index, but that would be more invasive to the callers.
Fixes: da91309e0a7e8966d916a74cce42ed170fde06bf
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (then rebased)
Tested-by: Amir Vadai <amirv@mellanox.com>
Acked-by: Amir Vadai <amirv@mellanox.com>
Acked-by: David S. Miller <davem@davemloft.net>
2015-05-08 17:44:13 +00:00
|
|
|
* This function selects an online CPU according to a numa aware policy;
|
|
|
|
* local cpus are returned first, followed by non-local ones, then it
|
|
|
|
* wraps around.
|
cpumask: Utility function to set n'th cpu - local cpu first
This function sets the n'th cpu - local cpu's first.
For example: in a 16 cores server with even cpu's local, will get the
following values:
cpumask_set_cpu_local_first(0, numa, cpumask) => cpu 0 is set
cpumask_set_cpu_local_first(1, numa, cpumask) => cpu 2 is set
...
cpumask_set_cpu_local_first(7, numa, cpumask) => cpu 14 is set
cpumask_set_cpu_local_first(8, numa, cpumask) => cpu 1 is set
cpumask_set_cpu_local_first(9, numa, cpumask) => cpu 3 is set
...
cpumask_set_cpu_local_first(15, numa, cpumask) => cpu 15 is set
Curently this function will be used by multi queue networking devices to
calculate the irq affinity mask, such that as many local cpu's as
possible will be utilized to handle the mq device irq's.
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-09 07:24:38 +00:00
|
|
|
*
|
cpumask_set_cpu_local_first => cpumask_local_spread, lament
da91309e0a7e (cpumask: Utility function to set n'th cpu...) created a
genuinely weird function. I never saw it before, it went through DaveM.
(He only does this to make us other maintainers feel better about our own
mistakes.)
cpumask_set_cpu_local_first's purpose is say "I need to spread things
across N online cpus, choose the ones on this numa node first"; you call
it in a loop.
It can fail. One of the two callers ignores this, the other aborts and
fails the device open.
It can fail in two ways: allocating the off-stack cpumask, or through a
convoluted codepath which AFAICT can only occur if cpu_online_mask
changes. Which shouldn't happen, because if cpu_online_mask can change
while you call this, it could return a now-offline cpu anyway.
It contains a nonsensical test "!cpumask_of_node(numa_node)". This was
drawn to my attention by Geert, who said this causes a warning on Sparc.
It sets a single bit in a cpumask instead of returning a cpu number,
because that's what the callers want.
It could be made more efficient by passing the previous cpu rather than
an index, but that would be more invasive to the callers.
Fixes: da91309e0a7e8966d916a74cce42ed170fde06bf
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (then rebased)
Tested-by: Amir Vadai <amirv@mellanox.com>
Acked-by: Amir Vadai <amirv@mellanox.com>
Acked-by: David S. Miller <davem@davemloft.net>
2015-05-08 17:44:13 +00:00
|
|
|
* It's not very efficient, but useful for setup.
|
cpumask: Utility function to set n'th cpu - local cpu first
This function sets the n'th cpu - local cpu's first.
For example: in a 16 cores server with even cpu's local, will get the
following values:
cpumask_set_cpu_local_first(0, numa, cpumask) => cpu 0 is set
cpumask_set_cpu_local_first(1, numa, cpumask) => cpu 2 is set
...
cpumask_set_cpu_local_first(7, numa, cpumask) => cpu 14 is set
cpumask_set_cpu_local_first(8, numa, cpumask) => cpu 1 is set
cpumask_set_cpu_local_first(9, numa, cpumask) => cpu 3 is set
...
cpumask_set_cpu_local_first(15, numa, cpumask) => cpu 15 is set
Curently this function will be used by multi queue networking devices to
calculate the irq affinity mask, such that as many local cpu's as
possible will be utilized to handle the mq device irq's.
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-09 07:24:38 +00:00
|
|
|
*/
|
cpumask_set_cpu_local_first => cpumask_local_spread, lament
da91309e0a7e (cpumask: Utility function to set n'th cpu...) created a
genuinely weird function. I never saw it before, it went through DaveM.
(He only does this to make us other maintainers feel better about our own
mistakes.)
cpumask_set_cpu_local_first's purpose is say "I need to spread things
across N online cpus, choose the ones on this numa node first"; you call
it in a loop.
It can fail. One of the two callers ignores this, the other aborts and
fails the device open.
It can fail in two ways: allocating the off-stack cpumask, or through a
convoluted codepath which AFAICT can only occur if cpu_online_mask
changes. Which shouldn't happen, because if cpu_online_mask can change
while you call this, it could return a now-offline cpu anyway.
It contains a nonsensical test "!cpumask_of_node(numa_node)". This was
drawn to my attention by Geert, who said this causes a warning on Sparc.
It sets a single bit in a cpumask instead of returning a cpu number,
because that's what the callers want.
It could be made more efficient by passing the previous cpu rather than
an index, but that would be more invasive to the callers.
Fixes: da91309e0a7e8966d916a74cce42ed170fde06bf
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (then rebased)
Tested-by: Amir Vadai <amirv@mellanox.com>
Acked-by: Amir Vadai <amirv@mellanox.com>
Acked-by: David S. Miller <davem@davemloft.net>
2015-05-08 17:44:13 +00:00
|
|
|
unsigned int cpumask_local_spread(unsigned int i, int node)
|
cpumask: Utility function to set n'th cpu - local cpu first
This function sets the n'th cpu - local cpu's first.
For example: in a 16 cores server with even cpu's local, will get the
following values:
cpumask_set_cpu_local_first(0, numa, cpumask) => cpu 0 is set
cpumask_set_cpu_local_first(1, numa, cpumask) => cpu 2 is set
...
cpumask_set_cpu_local_first(7, numa, cpumask) => cpu 14 is set
cpumask_set_cpu_local_first(8, numa, cpumask) => cpu 1 is set
cpumask_set_cpu_local_first(9, numa, cpumask) => cpu 3 is set
...
cpumask_set_cpu_local_first(15, numa, cpumask) => cpu 15 is set
Curently this function will be used by multi queue networking devices to
calculate the irq affinity mask, such that as many local cpu's as
possible will be utilized to handle the mq device irq's.
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-09 07:24:38 +00:00
|
|
|
{
|
2020-06-25 22:34:41 +00:00
|
|
|
int cpu, hk_flags;
|
|
|
|
const struct cpumask *mask;
|
cpumask: Utility function to set n'th cpu - local cpu first
This function sets the n'th cpu - local cpu's first.
For example: in a 16 cores server with even cpu's local, will get the
following values:
cpumask_set_cpu_local_first(0, numa, cpumask) => cpu 0 is set
cpumask_set_cpu_local_first(1, numa, cpumask) => cpu 2 is set
...
cpumask_set_cpu_local_first(7, numa, cpumask) => cpu 14 is set
cpumask_set_cpu_local_first(8, numa, cpumask) => cpu 1 is set
cpumask_set_cpu_local_first(9, numa, cpumask) => cpu 3 is set
...
cpumask_set_cpu_local_first(15, numa, cpumask) => cpu 15 is set
Curently this function will be used by multi queue networking devices to
calculate the irq affinity mask, such that as many local cpu's as
possible will be utilized to handle the mq device irq's.
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-09 07:24:38 +00:00
|
|
|
|
2020-06-25 22:34:41 +00:00
|
|
|
hk_flags = HK_FLAG_DOMAIN | HK_FLAG_MANAGED_IRQ;
|
|
|
|
mask = housekeeping_cpumask(hk_flags);
|
cpumask_set_cpu_local_first => cpumask_local_spread, lament
da91309e0a7e (cpumask: Utility function to set n'th cpu...) created a
genuinely weird function. I never saw it before, it went through DaveM.
(He only does this to make us other maintainers feel better about our own
mistakes.)
cpumask_set_cpu_local_first's purpose is say "I need to spread things
across N online cpus, choose the ones on this numa node first"; you call
it in a loop.
It can fail. One of the two callers ignores this, the other aborts and
fails the device open.
It can fail in two ways: allocating the off-stack cpumask, or through a
convoluted codepath which AFAICT can only occur if cpu_online_mask
changes. Which shouldn't happen, because if cpu_online_mask can change
while you call this, it could return a now-offline cpu anyway.
It contains a nonsensical test "!cpumask_of_node(numa_node)". This was
drawn to my attention by Geert, who said this causes a warning on Sparc.
It sets a single bit in a cpumask instead of returning a cpu number,
because that's what the callers want.
It could be made more efficient by passing the previous cpu rather than
an index, but that would be more invasive to the callers.
Fixes: da91309e0a7e8966d916a74cce42ed170fde06bf
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (then rebased)
Tested-by: Amir Vadai <amirv@mellanox.com>
Acked-by: Amir Vadai <amirv@mellanox.com>
Acked-by: David S. Miller <davem@davemloft.net>
2015-05-08 17:44:13 +00:00
|
|
|
/* Wrap: we always want a cpu. */
|
2020-06-25 22:34:41 +00:00
|
|
|
i %= cpumask_weight(mask);
|
cpumask: Utility function to set n'th cpu - local cpu first
This function sets the n'th cpu - local cpu's first.
For example: in a 16 cores server with even cpu's local, will get the
following values:
cpumask_set_cpu_local_first(0, numa, cpumask) => cpu 0 is set
cpumask_set_cpu_local_first(1, numa, cpumask) => cpu 2 is set
...
cpumask_set_cpu_local_first(7, numa, cpumask) => cpu 14 is set
cpumask_set_cpu_local_first(8, numa, cpumask) => cpu 1 is set
cpumask_set_cpu_local_first(9, numa, cpumask) => cpu 3 is set
...
cpumask_set_cpu_local_first(15, numa, cpumask) => cpu 15 is set
Curently this function will be used by multi queue networking devices to
calculate the irq affinity mask, such that as many local cpu's as
possible will be utilized to handle the mq device irq's.
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-09 07:24:38 +00:00
|
|
|
|
2019-03-05 23:42:58 +00:00
|
|
|
if (node == NUMA_NO_NODE) {
|
2020-06-25 22:34:41 +00:00
|
|
|
for_each_cpu(cpu, mask) {
|
cpumask_set_cpu_local_first => cpumask_local_spread, lament
da91309e0a7e (cpumask: Utility function to set n'th cpu...) created a
genuinely weird function. I never saw it before, it went through DaveM.
(He only does this to make us other maintainers feel better about our own
mistakes.)
cpumask_set_cpu_local_first's purpose is say "I need to spread things
across N online cpus, choose the ones on this numa node first"; you call
it in a loop.
It can fail. One of the two callers ignores this, the other aborts and
fails the device open.
It can fail in two ways: allocating the off-stack cpumask, or through a
convoluted codepath which AFAICT can only occur if cpu_online_mask
changes. Which shouldn't happen, because if cpu_online_mask can change
while you call this, it could return a now-offline cpu anyway.
It contains a nonsensical test "!cpumask_of_node(numa_node)". This was
drawn to my attention by Geert, who said this causes a warning on Sparc.
It sets a single bit in a cpumask instead of returning a cpu number,
because that's what the callers want.
It could be made more efficient by passing the previous cpu rather than
an index, but that would be more invasive to the callers.
Fixes: da91309e0a7e8966d916a74cce42ed170fde06bf
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (then rebased)
Tested-by: Amir Vadai <amirv@mellanox.com>
Acked-by: Amir Vadai <amirv@mellanox.com>
Acked-by: David S. Miller <davem@davemloft.net>
2015-05-08 17:44:13 +00:00
|
|
|
if (i-- == 0)
|
|
|
|
return cpu;
|
2020-06-25 22:34:41 +00:00
|
|
|
}
|
cpumask: Utility function to set n'th cpu - local cpu first
This function sets the n'th cpu - local cpu's first.
For example: in a 16 cores server with even cpu's local, will get the
following values:
cpumask_set_cpu_local_first(0, numa, cpumask) => cpu 0 is set
cpumask_set_cpu_local_first(1, numa, cpumask) => cpu 2 is set
...
cpumask_set_cpu_local_first(7, numa, cpumask) => cpu 14 is set
cpumask_set_cpu_local_first(8, numa, cpumask) => cpu 1 is set
cpumask_set_cpu_local_first(9, numa, cpumask) => cpu 3 is set
...
cpumask_set_cpu_local_first(15, numa, cpumask) => cpu 15 is set
Curently this function will be used by multi queue networking devices to
calculate the irq affinity mask, such that as many local cpu's as
possible will be utilized to handle the mq device irq's.
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-09 07:24:38 +00:00
|
|
|
} else {
|
cpumask_set_cpu_local_first => cpumask_local_spread, lament
da91309e0a7e (cpumask: Utility function to set n'th cpu...) created a
genuinely weird function. I never saw it before, it went through DaveM.
(He only does this to make us other maintainers feel better about our own
mistakes.)
cpumask_set_cpu_local_first's purpose is say "I need to spread things
across N online cpus, choose the ones on this numa node first"; you call
it in a loop.
It can fail. One of the two callers ignores this, the other aborts and
fails the device open.
It can fail in two ways: allocating the off-stack cpumask, or through a
convoluted codepath which AFAICT can only occur if cpu_online_mask
changes. Which shouldn't happen, because if cpu_online_mask can change
while you call this, it could return a now-offline cpu anyway.
It contains a nonsensical test "!cpumask_of_node(numa_node)". This was
drawn to my attention by Geert, who said this causes a warning on Sparc.
It sets a single bit in a cpumask instead of returning a cpu number,
because that's what the callers want.
It could be made more efficient by passing the previous cpu rather than
an index, but that would be more invasive to the callers.
Fixes: da91309e0a7e8966d916a74cce42ed170fde06bf
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (then rebased)
Tested-by: Amir Vadai <amirv@mellanox.com>
Acked-by: Amir Vadai <amirv@mellanox.com>
Acked-by: David S. Miller <davem@davemloft.net>
2015-05-08 17:44:13 +00:00
|
|
|
/* NUMA first. */
|
2020-06-25 22:34:41 +00:00
|
|
|
for_each_cpu_and(cpu, cpumask_of_node(node), mask) {
|
cpumask_set_cpu_local_first => cpumask_local_spread, lament
da91309e0a7e (cpumask: Utility function to set n'th cpu...) created a
genuinely weird function. I never saw it before, it went through DaveM.
(He only does this to make us other maintainers feel better about our own
mistakes.)
cpumask_set_cpu_local_first's purpose is say "I need to spread things
across N online cpus, choose the ones on this numa node first"; you call
it in a loop.
It can fail. One of the two callers ignores this, the other aborts and
fails the device open.
It can fail in two ways: allocating the off-stack cpumask, or through a
convoluted codepath which AFAICT can only occur if cpu_online_mask
changes. Which shouldn't happen, because if cpu_online_mask can change
while you call this, it could return a now-offline cpu anyway.
It contains a nonsensical test "!cpumask_of_node(numa_node)". This was
drawn to my attention by Geert, who said this causes a warning on Sparc.
It sets a single bit in a cpumask instead of returning a cpu number,
because that's what the callers want.
It could be made more efficient by passing the previous cpu rather than
an index, but that would be more invasive to the callers.
Fixes: da91309e0a7e8966d916a74cce42ed170fde06bf
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (then rebased)
Tested-by: Amir Vadai <amirv@mellanox.com>
Acked-by: Amir Vadai <amirv@mellanox.com>
Acked-by: David S. Miller <davem@davemloft.net>
2015-05-08 17:44:13 +00:00
|
|
|
if (i-- == 0)
|
|
|
|
return cpu;
|
2020-06-25 22:34:41 +00:00
|
|
|
}
|
cpumask_set_cpu_local_first => cpumask_local_spread, lament
da91309e0a7e (cpumask: Utility function to set n'th cpu...) created a
genuinely weird function. I never saw it before, it went through DaveM.
(He only does this to make us other maintainers feel better about our own
mistakes.)
cpumask_set_cpu_local_first's purpose is say "I need to spread things
across N online cpus, choose the ones on this numa node first"; you call
it in a loop.
It can fail. One of the two callers ignores this, the other aborts and
fails the device open.
It can fail in two ways: allocating the off-stack cpumask, or through a
convoluted codepath which AFAICT can only occur if cpu_online_mask
changes. Which shouldn't happen, because if cpu_online_mask can change
while you call this, it could return a now-offline cpu anyway.
It contains a nonsensical test "!cpumask_of_node(numa_node)". This was
drawn to my attention by Geert, who said this causes a warning on Sparc.
It sets a single bit in a cpumask instead of returning a cpu number,
because that's what the callers want.
It could be made more efficient by passing the previous cpu rather than
an index, but that would be more invasive to the callers.
Fixes: da91309e0a7e8966d916a74cce42ed170fde06bf
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (then rebased)
Tested-by: Amir Vadai <amirv@mellanox.com>
Acked-by: Amir Vadai <amirv@mellanox.com>
Acked-by: David S. Miller <davem@davemloft.net>
2015-05-08 17:44:13 +00:00
|
|
|
|
2020-06-25 22:34:41 +00:00
|
|
|
for_each_cpu(cpu, mask) {
|
cpumask_set_cpu_local_first => cpumask_local_spread, lament
da91309e0a7e (cpumask: Utility function to set n'th cpu...) created a
genuinely weird function. I never saw it before, it went through DaveM.
(He only does this to make us other maintainers feel better about our own
mistakes.)
cpumask_set_cpu_local_first's purpose is say "I need to spread things
across N online cpus, choose the ones on this numa node first"; you call
it in a loop.
It can fail. One of the two callers ignores this, the other aborts and
fails the device open.
It can fail in two ways: allocating the off-stack cpumask, or through a
convoluted codepath which AFAICT can only occur if cpu_online_mask
changes. Which shouldn't happen, because if cpu_online_mask can change
while you call this, it could return a now-offline cpu anyway.
It contains a nonsensical test "!cpumask_of_node(numa_node)". This was
drawn to my attention by Geert, who said this causes a warning on Sparc.
It sets a single bit in a cpumask instead of returning a cpu number,
because that's what the callers want.
It could be made more efficient by passing the previous cpu rather than
an index, but that would be more invasive to the callers.
Fixes: da91309e0a7e8966d916a74cce42ed170fde06bf
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (then rebased)
Tested-by: Amir Vadai <amirv@mellanox.com>
Acked-by: Amir Vadai <amirv@mellanox.com>
Acked-by: David S. Miller <davem@davemloft.net>
2015-05-08 17:44:13 +00:00
|
|
|
/* Skip NUMA nodes, done above. */
|
|
|
|
if (cpumask_test_cpu(cpu, cpumask_of_node(node)))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
if (i-- == 0)
|
|
|
|
return cpu;
|
cpumask: Utility function to set n'th cpu - local cpu first
This function sets the n'th cpu - local cpu's first.
For example: in a 16 cores server with even cpu's local, will get the
following values:
cpumask_set_cpu_local_first(0, numa, cpumask) => cpu 0 is set
cpumask_set_cpu_local_first(1, numa, cpumask) => cpu 2 is set
...
cpumask_set_cpu_local_first(7, numa, cpumask) => cpu 14 is set
cpumask_set_cpu_local_first(8, numa, cpumask) => cpu 1 is set
cpumask_set_cpu_local_first(9, numa, cpumask) => cpu 3 is set
...
cpumask_set_cpu_local_first(15, numa, cpumask) => cpu 15 is set
Curently this function will be used by multi queue networking devices to
calculate the irq affinity mask, such that as many local cpu's as
possible will be utilized to handle the mq device irq's.
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-09 07:24:38 +00:00
|
|
|
}
|
|
|
|
}
|
cpumask_set_cpu_local_first => cpumask_local_spread, lament
da91309e0a7e (cpumask: Utility function to set n'th cpu...) created a
genuinely weird function. I never saw it before, it went through DaveM.
(He only does this to make us other maintainers feel better about our own
mistakes.)
cpumask_set_cpu_local_first's purpose is say "I need to spread things
across N online cpus, choose the ones on this numa node first"; you call
it in a loop.
It can fail. One of the two callers ignores this, the other aborts and
fails the device open.
It can fail in two ways: allocating the off-stack cpumask, or through a
convoluted codepath which AFAICT can only occur if cpu_online_mask
changes. Which shouldn't happen, because if cpu_online_mask can change
while you call this, it could return a now-offline cpu anyway.
It contains a nonsensical test "!cpumask_of_node(numa_node)". This was
drawn to my attention by Geert, who said this causes a warning on Sparc.
It sets a single bit in a cpumask instead of returning a cpu number,
because that's what the callers want.
It could be made more efficient by passing the previous cpu rather than
an index, but that would be more invasive to the callers.
Fixes: da91309e0a7e8966d916a74cce42ed170fde06bf
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (then rebased)
Tested-by: Amir Vadai <amirv@mellanox.com>
Acked-by: Amir Vadai <amirv@mellanox.com>
Acked-by: David S. Miller <davem@davemloft.net>
2015-05-08 17:44:13 +00:00
|
|
|
BUG();
|
cpumask: Utility function to set n'th cpu - local cpu first
This function sets the n'th cpu - local cpu's first.
For example: in a 16 cores server with even cpu's local, will get the
following values:
cpumask_set_cpu_local_first(0, numa, cpumask) => cpu 0 is set
cpumask_set_cpu_local_first(1, numa, cpumask) => cpu 2 is set
...
cpumask_set_cpu_local_first(7, numa, cpumask) => cpu 14 is set
cpumask_set_cpu_local_first(8, numa, cpumask) => cpu 1 is set
cpumask_set_cpu_local_first(9, numa, cpumask) => cpu 3 is set
...
cpumask_set_cpu_local_first(15, numa, cpumask) => cpu 15 is set
Curently this function will be used by multi queue networking devices to
calculate the irq affinity mask, such that as many local cpu's as
possible will be utilized to handle the mq device irq's.
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-09 07:24:38 +00:00
|
|
|
}
|
cpumask_set_cpu_local_first => cpumask_local_spread, lament
da91309e0a7e (cpumask: Utility function to set n'th cpu...) created a
genuinely weird function. I never saw it before, it went through DaveM.
(He only does this to make us other maintainers feel better about our own
mistakes.)
cpumask_set_cpu_local_first's purpose is say "I need to spread things
across N online cpus, choose the ones on this numa node first"; you call
it in a loop.
It can fail. One of the two callers ignores this, the other aborts and
fails the device open.
It can fail in two ways: allocating the off-stack cpumask, or through a
convoluted codepath which AFAICT can only occur if cpu_online_mask
changes. Which shouldn't happen, because if cpu_online_mask can change
while you call this, it could return a now-offline cpu anyway.
It contains a nonsensical test "!cpumask_of_node(numa_node)". This was
drawn to my attention by Geert, who said this causes a warning on Sparc.
It sets a single bit in a cpumask instead of returning a cpu number,
because that's what the callers want.
It could be made more efficient by passing the previous cpu rather than
an index, but that would be more invasive to the callers.
Fixes: da91309e0a7e8966d916a74cce42ed170fde06bf
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (then rebased)
Tested-by: Amir Vadai <amirv@mellanox.com>
Acked-by: Amir Vadai <amirv@mellanox.com>
Acked-by: David S. Miller <davem@davemloft.net>
2015-05-08 17:44:13 +00:00
|
|
|
EXPORT_SYMBOL(cpumask_local_spread);
|
2020-03-11 01:01:13 +00:00
|
|
|
|
|
|
|
static DEFINE_PER_CPU(int, distribute_cpu_mask_prev);
|
|
|
|
|
|
|
|
/**
|
|
|
|
* Returns an arbitrary cpu within srcp1 & srcp2.
|
|
|
|
*
|
|
|
|
* Iterated calls using the same srcp1 and srcp2 will be distributed within
|
|
|
|
* their intersection.
|
|
|
|
*
|
|
|
|
* Returns >= nr_cpu_ids if the intersection is empty.
|
|
|
|
*/
|
|
|
|
int cpumask_any_and_distribute(const struct cpumask *src1p,
|
|
|
|
const struct cpumask *src2p)
|
|
|
|
{
|
|
|
|
int next, prev;
|
|
|
|
|
|
|
|
/* NOTE: our first selection will skip 0. */
|
|
|
|
prev = __this_cpu_read(distribute_cpu_mask_prev);
|
|
|
|
|
|
|
|
next = cpumask_next_and(prev, src1p, src2p);
|
|
|
|
if (next >= nr_cpu_ids)
|
|
|
|
next = cpumask_first_and(src1p, src2p);
|
|
|
|
|
|
|
|
if (next < nr_cpu_ids)
|
|
|
|
__this_cpu_write(distribute_cpu_mask_prev, next);
|
|
|
|
|
|
|
|
return next;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(cpumask_any_and_distribute);
|
2020-10-01 13:54:14 +00:00
|
|
|
|
|
|
|
int cpumask_any_distribute(const struct cpumask *srcp)
|
|
|
|
{
|
|
|
|
int next, prev;
|
|
|
|
|
|
|
|
/* NOTE: our first selection will skip 0. */
|
|
|
|
prev = __this_cpu_read(distribute_cpu_mask_prev);
|
|
|
|
|
|
|
|
next = cpumask_next(prev, srcp);
|
|
|
|
if (next >= nr_cpu_ids)
|
|
|
|
next = cpumask_first(srcp);
|
|
|
|
|
|
|
|
if (next < nr_cpu_ids)
|
|
|
|
__this_cpu_write(distribute_cpu_mask_prev, next);
|
|
|
|
|
|
|
|
return next;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(cpumask_any_distribute);
|