leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
ed138c368d
linux/arch/arm/boot/dts/Makefile

224 lines
6.1 KiB
Makefile
Raw Normal View History

ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-06 18:32:38 +00:00
ifeq ($(CONFIG_OF),y)
arm: at91: dt: at91sam9 add serial pinctrl support Set the dbgu pinctrl config by default as we have only one possible config For other uart set the rxd/txd by default. For at91sam9x5ek create soc based dts as we need to include specific soc dtsi. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-07-05 08:56:09 +00:00
# Keep at91 dtb files sorted alphabetically for each SoC
ARM: AT91: Add AT91RM9200EK board device tree Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-10-28 18:31:11 +00:00
# rm9200
dtb-$(CONFIG_ARCH_AT91) += at91rm9200ek.dtb
ARM: at91: add MPA 1600 DT board Signed-off-by: Joachim Eastwood <manabian@gmail.com> [nicolas.ferre@atmel.com: remove unneeded address-cells and size-cells to gpio-keys] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-02-08 01:25:56 +00:00
dtb-$(CONFIG_ARCH_AT91) += mpa1600.dtb
arm: at91: dt: at91sam9 add serial pinctrl support Set the dbgu pinctrl config by default as we have only one possible config For other uart set the rxd/txd by default. For at91sam9x5ek create soc based dts as we need to include specific soc dtsi. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-07-05 08:56:09 +00:00
# sam9260
ARM: at91: add Somfy Animeo IP board support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-11-15 13:56:27 +00:00
dtb-$(CONFIG_ARCH_AT91) += animeo_ip.dtb
arm: at91: dt: at91sam9 add serial pinctrl support Set the dbgu pinctrl config by default as we have only one possible config For other uart set the rxd/txd by default. For at91sam9x5ek create soc based dts as we need to include specific soc dtsi. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-07-05 08:56:09 +00:00
dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb
dtb-$(CONFIG_ARCH_AT91) += ethernut5.dtb
dtb-$(CONFIG_ARCH_AT91) += evk-pro3.dtb
dtb-$(CONFIG_ARCH_AT91) += tny_a9260.dtb
dtb-$(CONFIG_ARCH_AT91) += usb_a9260.dtb
# sam9263
dtb-$(CONFIG_ARCH_AT91) += at91sam9263ek.dtb
dtb-$(CONFIG_ARCH_AT91) += tny_a9263.dtb
dtb-$(CONFIG_ARCH_AT91) += usb_a9263.dtb
# sam9g20
dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek.dtb
dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek_2mmc.dtb
dtb-$(CONFIG_ARCH_AT91) += kizbox.dtb
dtb-$(CONFIG_ARCH_AT91) += tny_a9g20.dtb
dtb-$(CONFIG_ARCH_AT91) += usb_a9g20.dtb
# sam9g45
dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb
ARM: at91: add Ronetix pm9g45 board support CPU Module with ATMEL AT91SAM9G45 http://www.ronetix.at/pm9g45.html Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-10-18 06:10:21 +00:00
dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb
arm: at91: dt: at91sam9 add serial pinctrl support Set the dbgu pinctrl config by default as we have only one possible config For other uart set the rxd/txd by default. For at91sam9x5ek create soc based dts as we need to include specific soc dtsi. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-07-05 08:56:09 +00:00
# sam9n12
dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb
# sam9x5
ARM: at91: add Acme Systems Aria G25 board Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-04-04 15:36:49 +00:00
dtb-$(CONFIG_ARCH_AT91) += at91-ariag25.dtb
arm: at91: dt: at91sam9 add serial pinctrl support Set the dbgu pinctrl config by default as we have only one possible config For other uart set the rxd/txd by default. For at91sam9x5ek create soc based dts as we need to include specific soc dtsi. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-07-05 08:56:09 +00:00
dtb-$(CONFIG_ARCH_AT91) += at91sam9g15ek.dtb
dtb-$(CONFIG_ARCH_AT91) += at91sam9g25ek.dtb
dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb
dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb
dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb
ARM: at91: dt: add device tree files for SAMA5D3 family Add device tree files for the SAMA5D3 family (SAMA5D31, SAMA5D33, SAMA5D34 and SAMA5D35). Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 13:24:13 +00:00
# sama5d3
dtb-$(CONFIG_ARCH_AT91) += sama5d31ek.dtb
dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb
dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb
dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb
arm: at91: dt: at91sam9 add serial pinctrl support Set the dbgu pinctrl config by default as we have only one possible config For other uart set the rxd/txd by default. For at91sam9x5ek create soc based dts as we need to include specific soc dtsi. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-07-05 08:56:09 +00:00
ARM: dtb: move all dtb targets to common Makefile Since the dtb targets have moved to arch/arm/boot/dts/Makefile, sweep the platforms that have had new targets added recently and move them over. While I was at it, I also made the dtb generation more generic, i.e. if the platform is enabled then all dtbs for that platform will be created. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Tony Lindgren <tony@atomide.com> Cc: David Brown <davidb@codeaurora.com> Cc: Barry Song <Baohua.Song@csr.com> Cc: Simon Horman <horms@verge.net.au> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Stephen Warren <swarren@wwwdotorg.org>
2012-09-21 04:11:45 +00:00
dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
Add support for generic BCM SoC chipsets In order to start upstreaming Broadcom SoC support, create a starting hierarchy, arch and dts files. The first support SoC family that is planned is the BCM281XX (BCM11130/11140/11351/28145/28155) family of dual A9 mobile SoC cores. This code is just the skeleton code for get the machine upstreamed. It has been made MULTIPLATFORM compatible. Next steps ---------- Upstream a basic set of drivers - sufficient for a console boot to ramdisk. These will includer timer, gpio, i2c drivers. After this basic set, we will proceed with a more comprehensive set of drivers for the 281XX SoC family. v2 patch mods -------- - Remove l2x0_of_init call as there were problems with the code. A separate patch will be submitted with cache init code - Rename capri files and refs to bcm281xx-based names - Add bcm281xx binding doc - various misc cleanups v3 patch mods ------------- - Remove extra #include lines - Remove remaining references to capri - dt uart chipset string added - cleaned up chip # references v4 patch mods ------------- - swap order of compatible definitions for uart - fix typo v5 patch mods ------------- - Rename bcm281xx to bcm11351 in dts+code, leaving references to bcm281xx only in help+comments. v6 patch mods ------------- - fix typo in uart 'compatible' string Signed-off-by: Christian Daudt <csd@broadcom.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-19 17:46:10 +00:00
dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb
ARM: davinci: move dtb targets to common location The dtb targets belong in arch/arm/boot/dts/Makefile now, so move the newly added davinci targets there. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-20 06:25:59 +00:00
dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
da850-evm.dtb
ARM: kirkwood: move new dtbs to common Makefile This moves a few of the newly introduced dtb targets to the common dts/Makefile instead of the per-platform file. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-22 20:53:12 +00:00
dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
dove-cubox.dtb \
dove-dove-db.dtb
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-06 18:32:38 +00:00
dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
exynos4210-smdkv310.dtb \
ARM: soc: multiplatform enablement This is a pretty significant branch. It's the introduction of the first multiplatform support on ARM, and with this (and the later branch) merged, it is now possible to build one kernel that contains support for highbank, vexpress, mvebu, socfpga, and picoxcell. More platforms will be convered over in the next few releases. Two critical last things had to be done for this to be practical and possible: * Today each platform has its own include directory under mach-<mach>/include/mach/*, and traditionally that is where a lot of driver/platform shared definitions have gone, such as platform data structures. They now need to move out to a common location instead, and this branch moves a large number of those out to include/linux/platform_data. * Each platform used to list the device trees to compile for its boards in mach-<mach>/Makefile.boot. Both of the above changes will mean that there are some merge conflicts to come (and some to resolve here). It's a one-time move and once it settles in, we should be good for quite a while. Sorry for the overhead. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJQaO7aAAoJEIwa5zzehBx3bUIP/02U8PhkHJJrrowyIsWRBOql 7LPJ53PRRgrpBdmEGzFD3TO3zaNyrjQRbYgNDvzHMO6NAMNvdRFouuWYjO11/tuB i32zssXCC+eUOEgbAo/U/lYq+UOvqw9gv6mU+3+i3OcGEhdKOaoT/DSLPQC4hoDm 222TeLfFB3HJXu5n720dEQ9V3fO6TS1+bbh8TU3cjHqzceXsOrffZqOA5CQxUcRr KWwOjA0nALDwWcqgv45GJNwY3GTyAQ/hPMQavnuWK0voJ+qUYk5HftKocAK7C+py 0T0OFOAHTwtyhvzJBxLC84M6Ox465BYXyeNjIB+2nG/Um9+mDoP0dnWpGy4c7DMU P5hyqbeLGeqjUXQuYtRmgMMc3UeHKoUGAfXW9eMsjLa6/M4NLGv//7E7LbZPpgMZ obkjwuesmcaYn/FRyj/yFmC35YlF4oCLziVzEtURZw3eKHHSUlhkTDSMNnkcZ0kZ Vv7kFxnD2Y46ixiwSJv30ErQnVkgI3MdqDlDxkE8r5+phYuK4gCrNaJtiwRh/oNw cFhpPxKuA0sJ9b6YRTzjC45eT/XZomEEr/uifCFeRNaCquyjYP00Mm8F0flSqwx9 zi+emzPAwNmk1bvxMUM/idGnaj0V4p+BAYUAvkbSoqU1p1flzyhU88fGTSIyKOt6 K5TCDS2v5hrVykK9TDwl =Tc6y -----END PGP SIGNATURE----- Merge tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc multiplatform enablement from Olof Johansson: "This is a pretty significant branch. It's the introduction of the first multiplatform support on ARM, and with this (and the later branch) merged, it is now possible to build one kernel that contains support for highbank, vexpress, mvebu, socfpga, and picoxcell. More platforms will be convered over in the next few releases. Two critical last things had to be done for this to be practical and possible: * Today each platform has its own include directory under mach-<mach>/include/mach/*, and traditionally that is where a lot of driver/platform shared definitions have gone, such as platform data structures. They now need to move out to a common location instead, and this branch moves a large number of those out to include/linux/platform_data. * Each platform used to list the device trees to compile for its boards in mach-<mach>/Makefile.boot. Both of the above changes will mean that there are some merge conflicts to come (and some to resolve here). It's a one-time move and once it settles in, we should be good for quite a while. Sorry for the overhead." Fix conflicts as per Olof. * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits) ARM: add v7 multi-platform defconfig ARM: msm: Move core.h contents into common.h ARM: highbank: call highbank_pm_init from .init_machine ARM: dtb: move all dtb targets to common Makefile ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ...
2012-10-02 02:11:38 +00:00
exynos4210-trats.dtb \
ARM: dts: exynos4210: Add basic dts file for universal_c210 board This patch adds basic device tree sources for Universal C210 board. Currently support includes: - eMMC - serial - max8952 and max8998 voltage regulators. - gpio-keys More support will be added in further patches. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-23 15:46:34 +00:00
exynos4210-universal_c210.dtb \
ARM: dts: Add board dts file for ODROID-X Add initial DT for Hardkernel's ODROID-X board based on EXYNOS4412 SoC. This patch including adds the node to support fixed voltage for peripherals like LED, ethernet controller, and this patch adds GPIO connected LEDS on ODROID-X board and configure its properties like following: LED1: use 'heartbeat' trigger, blinking while the board is running. LED2: use 'mmc0' trigger, on when mmc0 is accessing. And adds the device node to support eMMC storage on SDCARD4 ports, controlled by MSHC. Signed-off-by: Dongjin Kim <tobetter@gmail.com> Acked-by: Olof Johansson <olof@lixom.net> [kgene.kim@samsung.com: squashed into one commit as per Olof's comment] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-01-11 01:12:50 +00:00
exynos4412-odroidx.dtb \
ARM: dts: add board dts file for EXYNOS4412 based SMDK board Add a minimal board dts file for Samsung EXYNOS4412 based SMDK board. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-06 23:17:43 +00:00
exynos4412-smdk4412.dtb \
ARM: dts: add board dts file for EXYNOS4412 based Origen board Add a minimal board dts file for EXYNOS4412 based Insignal Origen board. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-12-31 23:07:39 +00:00
exynos4412-origen.dtb \
ARM: dts: Add initial board support file for exynos5250-arndale Arndale is a low cost board based on the Samsung Exynos5250 SoC. This patch adds initial device tree support for this board. Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Girish K S <ks.giri@samsung.com> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-02-05 00:15:56 +00:00
exynos5250-arndale.dtb \
ARM: dts: add device tree file for SD5v1 board This patch adds SD5v1.dts file for supporting SD5v1(Exynos5440) board. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-08 12:46:34 +00:00
exynos5440-sd5v1.dtb \
ARM: dts: Add board dts file for Snow board (ARM Chromebook) This dts file is based on the Snow dts file in the Chromium OS kernel tree with the following changes: * Some details have been updated to match the exynos5250-smdk5250.dts file from linux-next (as of c11068538994430547722dc9fb515a0ceefd5cb9). * This file doesn't include references to hardware whose upstream support isn't quite there yet. That includes most i2c devices. Note that most i2c busses have been included with no devices. The Snow dts file is mostly just an include of the "cros5250" dts file which describes a class of similar boards. Support for other boards has not yet been send upstream. With this file and a change to use UART3 for serial output I can: * Boot to a command line using either SD or EMMC as a root filesystem * See the power button and lid switch using evtest. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-21 04:32:21 +00:00
exynos5250-smdk5250.dtb \
ARM: dts: fix duplicated build target and alphabetical sort out for exynos Commit db5b0ae00712 ("Merge tag 'dt' of git://git.kernel.org/.../arm-soc") causes a duplicated build target. This patch fixes it and sorts out the build target alphabetically so that we can recognize something wrong easily. Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-21 18:02:13 +00:00
exynos5250-snow.dtb \
exynos5440-ssdk5440.dtb
ARM: dts: Add Calxeda ECX-2000 support Separate out common dts pieces from highbank dts and add support for Calxeda ECX-2000 (Midway) SOC. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-10-25 16:59:09 +00:00
dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
ecx-2000.dtb
ARM: dts: compile Integrator device trees This makes sure that the ARM Integrator device trees get compiled during build. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-10-12 20:22:59 +00:00
dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
integratorcp.dtb
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-06 18:32:38 +00:00
dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
ARM: Kirkwood: DT board setup for CloudBox This patch adds DT board setup for the LaCie NAS CloudBox. The CloudBox is a low cost NAS based on the Network Space v2. Chipset list: - CPU MARVELL 88F6702 1Ghz - SDRAM memory: 256MB DDR2-800 (2x128MB x8) 400Mhz - 1 Ethernet Gigabit port (PHY MARVELL 88E1318) - SPI flash, NOR 512KB - 1 push button - 2 LEDs (red and blue) There is no EEPROM and no USB ports embedded. Note that this board must not be confused with the Network Space Mini v2 which is embedded in a previous LaCie product also named CloudBox. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-08 22:41:28 +00:00
dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
kirkwood-dns320.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-06 18:32:38 +00:00
kirkwood-dns325.dtb \
ARM: kirkwood: move new dtbs to common Makefile This moves a few of the newly introduced dtb targets to the common dts/Makefile instead of the per-platform file. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-22 20:53:12 +00:00
kirkwood-dockstar.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-06 18:32:38 +00:00
kirkwood-dreamplug.dtb \
kirkwood-goflexnet.dtb \
ARM: kirkwood: convert Guruplug Server Plus to use the device tree Add a device tree entry for the Guruplug Server Plus board. This port was based both on the work done on the dreamplug and the dockstar. It builds, boots and works on my Guruplug Server Plus. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-12-09 18:40:04 +00:00
kirkwood-guruplug-server-plus.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-06 18:32:38 +00:00
kirkwood-ib62x0.dtb \
kirkwood-iconnect.dtb \
ARM: kirkwood: move new dtbs to common Makefile This moves a few of the newly introduced dtb targets to the common dts/Makefile instead of the per-platform file. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-22 20:53:12 +00:00
kirkwood-iomega_ix2_200.dtb \
ARM: kirkwood: DT board setup for Network Space v2 and parents This patch adds DT board setup for LaCie Network Space v2 and parents, based on the Marvell Kirkwood 6281 SoC. This includes Network Space v2 (Max) and Internet Space v2. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17 10:09:04 +00:00
kirkwood-is2.dtb \
ARM: kirkwood: move new dtbs to common Makefile This moves a few of the newly introduced dtb targets to the common dts/Makefile instead of the per-platform file. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-22 20:53:12 +00:00
kirkwood-km_kirkwood.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-06 18:32:38 +00:00
kirkwood-lschlv2.dtb \
kirkwood-lsxhl.dtb \
ARM: kirkwood: Add support for the MPL CEC4 Signed-off-by: Stefan Peter <s.peter@mpl.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-18 15:46:16 +00:00
kirkwood-mplcec4.dtb \
ARM: kirkwood: Add support for NETGEAR ReadyNAS Duo v2 using DT Add support for NETGEAR ReadyNAS Duo v2 (Hardware specs available here: http://natisbad.org/NAS/). Almost everything is supported via provided .dts. A board-readynas.c file is nonetheless required for device not only converted to DT (Gbit controller). Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Tested-By: Arnaud Ebalard <arno@natisbad.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-19 22:28:06 +00:00
kirkwood-netgear_readynas_duo_v2.dtb \
ARM: kirkwood: DT board setup for Network Space v2 and parents This patch adds DT board setup for LaCie Network Space v2 and parents, based on the Marvell Kirkwood 6281 SoC. This includes Network Space v2 (Max) and Internet Space v2. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17 10:09:04 +00:00
kirkwood-ns2.dtb \
ARM: kirkwood: DT board setup for Network Space Lite v2 This patch adds DT board setup for the LaCie NAS Network Space Lite v2. This board is derived from the Network Space v2 and a lot of hardware characteristics are shared. - CPU: Marvell 88F6192 800Mhz - SDRAM memory: 128MB DDR2 200Mhz - 1 SATA port: internal - Gigabit ethernet: PHY Marvell 88E1318 - Flash memory: SPI NOR 512KB (Macronix MX25L4005A) - i2c EEPROM: 512 bytes (24C04 type) - 2 USB2 ports: host and host/device - 1 push button - 1 SATA LED (bi-color, blue and red) Note that the SATA LED is not compatible with the driver leds-ns2. The LED behaviour ("on", "off" or "SATA activity blink") is controlled via a single MPP (21). Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17 10:09:05 +00:00
kirkwood-ns2lite.dtb \
ARM: kirkwood: DT board setup for Network Space v2 and parents This patch adds DT board setup for LaCie Network Space v2 and parents, based on the Marvell Kirkwood 6281 SoC. This includes Network Space v2 (Max) and Internet Space v2. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17 10:09:04 +00:00
kirkwood-ns2max.dtb \
ARM: kirkwood: DT board setup for Network Space Mini v2 This patch adds DT board setup for the LaCie NAS Network Space Mini v2 (aka SafeBox). The hardware characteristics are very close to those of the Network Space Lite v2. The main difference are: - A GPIO fan which is only available on the NS2 Mini. - A single USB host port is wired on the NS2 Mini. The NS2 Lite provides an additional dual-mode USB port (host/device). Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-17 10:09:06 +00:00
kirkwood-ns2mini.dtb \
arm: kirkwood: add support for ZyXEL NSA310 Hello, Andrew > > +#define NSA310_GPIO_LED_ESATA_GREEN 12 > > <..> > > +#define NSA310_GPIO_POWER_OFF 48 > > It looks like most of these are not used. Please remove them. True. Fixed. > > +static struct mtd_partition nsa310_mtd_parts[] = { > > + { > > + .name = "uboot", > > + .offset = 0, > > + .size = 0x100000, > > + .mask_flags = MTD_WRITEABLE, > > + }, { > > <..> > You should be able to put all that into DT. Take a look at Correct. I did the conversion and tested that the partitions can be read with dd and produce exactly the same data before and after conversion. So, the partition offsets at least should be fine. > > +static struct i2c_board_info __initdata nsa310_i2c_info[] = { > > + { I2C_BOARD_INFO("adt7476", 0x2e) }, > > +}; > > You can also do this in DT as well. kirkwood-ts219.dtsi has > > i2c@11000 { > status = "okay"; > clock-frequency = <400000>; Ok, I did convert the i2c definition to use the devicetree. The adt7476 device itself is not at reach of device tree, AFAIK and requires more work at there? Thanks for your valuable comments. Following is a new patch that should address the problems and mistakes you pointed and also some of the pointed by Jason Cooper. The nand and i2c are now defined at DT and I also removed the pointless defines and ARM_APPENDED_DTB. It is based against the Linus' official 3.6 version. Best regards, Tero Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-26 15:56:16 +00:00
kirkwood-nsa310.dtb \
ARM: Kirkwood: new board USI Topkick This is a new kirkwood box made by Universal Scientific Industrial, Inc. The product description is here: http://www.usish.com/english/products_topkick1281p2.php It is very similar to the dreamplug and other plug devices, with the exception that it has room for a 2.5" SATA HDD internally. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2012-10-22 02:15:35 +00:00
kirkwood-topkick.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-06 18:32:38 +00:00
kirkwood-ts219-6281.dtb \
ARM: kirkwood: Add Plat'Home OpenBlocks A6 support Add support for Plat'Home OpenBlocks A6 using the device tree where possible. This commit supports SATA, USB, ether and serial console. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-13 07:43:09 +00:00
kirkwood-ts219-6282.dtb \
kirkwood-openblocks_a6.dtb
ARM: PRIMA2: add new SiRFmarco SMP SoC infrastructures this patch adds tick timer, smp entries and generic DT machine for SiRFmarco dual-core SMP chips. with the added marco, we change the defconfig, using the same defconfig, we get a zImage which can work on both prima2 and marco. Signed-off-by: Barry Song <Baohua.Song@csr.com> Cc: Mark Rutland <mark.rutland@arm.com>
2012-12-20 11:37:32 +00:00
dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
ARM: dtb: move all dtb targets to common Makefile Since the dtb targets have moved to arch/arm/boot/dts/Makefile, sweep the platforms that have had new targets added recently and move them over. While I was at it, I also made the dtb generation more generic, i.e. if the platform is enabled then all dtbs for that platform will be created. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Tony Lindgren <tony@atomide.com> Cc: David Brown <davidb@codeaurora.com> Cc: Barry Song <Baohua.Song@csr.com> Cc: Simon Horman <horms@verge.net.au> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Stephen Warren <swarren@wwwdotorg.org>
2012-09-21 04:11:45 +00:00
dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
msm8960-cdp.dtb
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-06 18:32:38 +00:00
dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
arm: mvebu: support for the Globalscale Mirabox board This platform, available from Globalscale has an Armada 370. For now, only the serial port is supported. Support for network, USB and other peripherals will be added as drivers for them become available for Armada 370 in mainline. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> --- This is 3.8 material. Changes from original version posted by Gregory: * Renamed .dts file to armada-370-mirabox.dts * Change compatible string to 'globalscale,mirabox' * Remove compatible string from armada-370-xp.c * Removed references to MBX0001
2012-10-27 16:22:45 +00:00
armada-370-mirabox.dtb \
arm: mvebu: add DTS file for Marvell RD-A370-A1 board This patch adds the DTS file to support the Marvell RD-A370-A1 (Reference Design board) also known as RD-88F6710 board. It is almost entirely similar to the DB-A370 board except that the first Ethernet PHY is SGMII-wired and the second is a switch which is RGMII-wired. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-09 19:56:07 +00:00
armada-370-rd.dtb \
arm: mvebu: support for the PlatHome OpenBlocks AX3-4 board This platform, available in Japan from PlatHome, has a dual-core Armada XP, the MV78260. For now, only the two serial ports and the three front LEDs are supported. Support for SMP, network, SATA, USB and other peripherals will be added as drivers for them become available for Armada XP in mainline. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> --- This is 3.8 material. Changes since v2: * Renamed the .dts file to armada-xp-openblocks-ax3-4.dts * Removed the compatible string from armada-370-xp.c (which now only lists the common SoC compatible string) Changes since v1: * Renamed the board to OpenBlocks AX3-4, since there is a variant called AX3-2 which has less RAM, and no mini PCIe port. Requested by Andrew Lunn. * Fix the amount of memory to 3 GB. In fact, the board has 1 GB soldered, and 2 GB in a SODIMM slot (which is therefore removable). But as the board is delivered as is, we'll assume it has 3 GB of memory by default.
2012-10-23 06:17:20 +00:00
armada-xp-db.dtb \
arm: mvebu: support for the new Armada XP development board(DB-MV784MP-GP) This is the new Armada XP evaluation board from Marvell. It comes with a RS232 port over USB, a SATA link, an internal SSD, 4 Ethernet Gigabit links. Support for USB (Host and device), SDIO, PCIe will be added as drivers when they become available for Armada XP in mainline. Tested-by: Simon Guinot <simon.guinot@sequanux.org> Tested-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-31 14:50:12 +00:00
armada-xp-gp.dtb \
arm: mvebu: support for the PlatHome OpenBlocks AX3-4 board This platform, available in Japan from PlatHome, has a dual-core Armada XP, the MV78260. For now, only the two serial ports and the three front LEDs are supported. Support for SMP, network, SATA, USB and other peripherals will be added as drivers for them become available for Armada XP in mainline. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> --- This is 3.8 material. Changes since v2: * Renamed the .dts file to armada-xp-openblocks-ax3-4.dts * Removed the compatible string from armada-370-xp.c (which now only lists the common SoC compatible string) Changes since v1: * Renamed the board to OpenBlocks AX3-4, since there is a variant called AX3-2 which has less RAM, and no mini PCIe port. Requested by Andrew Lunn. * Fix the amount of memory to 3 GB. In fact, the board has 1 GB soldered, and 2 GB in a SODIMM slot (which is therefore removable). But as the board is delivered as is, we'll assume it has 3 GB of memory by default.
2012-10-23 06:17:20 +00:00
armada-xp-openblocks-ax3-4.dtb
ARM: dts: add missing imx dtb targets Add missing imx dtb targets, so that make dtbs can cover all imx dtbs. It's pretty useful for testing dts changes. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-31 03:30:59 +00:00
dtb-$(CONFIG_ARCH_MXC) += \
imx25-karo-tx25.dtb \
ARM: mx25pdk: Add device tree support Add basic device tree support for mx25pdk board. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-03 16:27:35 +00:00
imx25-pdk.dtb \
ARM: dts: add missing imx dtb targets Add missing imx dtb targets, so that make dtbs can cover all imx dtbs. It's pretty useful for testing dts changes. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-31 03:30:59 +00:00
imx27-apf27.dtb \
ARM: imx: Add support for the Armadeus Systems APF27Dev docking board The APF27Dev is a docking board for an APF27 SOM Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-27 13:41:58 +00:00
imx27-apf27dev.dtb \
ARM: dts: add missing imx dtb targets Add missing imx dtb targets, so that make dtbs can cover all imx dtbs. It's pretty useful for testing dts changes. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-31 03:30:59 +00:00
imx27-pdk.dtb \
ARM: dts: Add missing imx27-phytec-phycore dtb target The patch adds missing imx27-phytec-phycore dtb target into Makefile. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-07 15:29:14 +00:00
imx27-phytec-phycore.dtb \
ARM: dts: add missing imx dtb targets Add missing imx dtb targets, so that make dtbs can cover all imx dtbs. It's pretty useful for testing dts changes. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-31 03:30:59 +00:00
imx31-bug.dtb \
ARM: dts: Add apf51 basic support Signed-off-by: Laurent Cans <laurent.cans@gmail.com> Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-20 22:55:29 +00:00
imx51-apf51.dtb \
ARM: imx: Add support for the Armadeus Systems APF51Dev docking board The APF51Dev is a docking board for an APF51 SOM Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-08 07:41:38 +00:00
imx51-apf51dev.dtb \
ARM: boot: dts: Add an entry for imx27-pdk.dtb Add an entry for imx27-pdk.dtb, so that it can be generated by default. Also, add an entry into Documentation/devicetree/bindings/arm/fsl.txt. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-25 11:10:52 +00:00
imx51-babbage.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-06 18:32:38 +00:00
imx53-ard.dtb \
imx53-evk.dtb \
ARM i.MX53: dts: add oftree for MBa53 baseboard The MBa53 is a baseboard for the TQMA53 embedded module. This enables/adds only supported devices, i.e. it is not feature complete, because of missing drivers in mainline linux. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-10 10:27:27 +00:00
imx53-mba53.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-06 18:32:38 +00:00
imx53-qsb.dtb \
imx53-smd.dtb \
ARM: dts: imx: add initial imx6dl-sabreauto support Add initial imx6dl-sabreauto support based on the common stuff already in imx6qdl-sabreauto.dtsi. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-02 06:38:11 +00:00
imx6dl-sabreauto.dtb \
ARM: dts: imx: add initial imx6dl-sabresd support Add initial imx6dl-sabresd support based on the common stuff already in imx6qdl-sabresd.dtsi. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-02 06:04:45 +00:00
imx6dl-sabresd.dtb \
ARM: dts: Add initial support for Wandboard Dual-Lite Wandboard is a development board that has two variants: one version based on mx6 dual lite and another one based on mx6 solo. For more details about Wandboard, please refer to: http://www.wandboard.org/ Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-03 12:29:16 +00:00
imx6dl-wandboard.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-06 18:32:38 +00:00
imx6q-arm2.dtb \
ARM: dts: imx6q-sabreauto: Add basic support mx6qsabreauto is a board based on mx6q SoC with the following features: - 2GB of DDR3 - 2 USB ports - 1 HDMI output port - SPI NOR - 2 LVDS LCD ports - Gigabit Ethernet - Camera - eMMC and SD card slot - Multichannel Audio - CAN - SATA - NAND - PCIE - Video Input Add very basic support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-07 17:12:49 +00:00
imx6q-sabreauto.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-06 18:32:38 +00:00
imx6q-sabrelite.dtb \
ARM: dts: MicroSys sbc6x support (i.MX6) Add support for MicroSys sbc6x board. Signed-off-by: Pavel Machek <pavel@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-01 12:24:22 +00:00
imx6q-sabresd.dtb \
imx6q-sbc6x.dtb
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-06 18:32:38 +00:00
dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
imx23-olinuxino.dtb \
imx23-stmp378x_devb.dtb \
ARM: mxs: Add support for the Armadeus Systems APF28 module The APF28 is a small SOM built around an i.MX28 processor with 128MBytes DDR2, 256MBytes NAND Flash and an Ethernet PHY. Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-18 09:50:26 +00:00
imx28-apf28.dtb \
ARM: mxs: Add support for the Armadeus Systems APF28Dev docking board The APF28Dev is a docking board for an APF28 SOM Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-31 17:39:26 +00:00
imx28-apf28dev.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-06 18:32:38 +00:00
imx28-apx4devkit.dtb \
imx28-cfa10036.dtb \
ARM: mxs: dt: Add Crystalfontz CFA-10037 device tree support The CFA-10037 is another expansion board for the CFA-10036 module, with only a USB Host, a Ethernet device and a lot of gpios. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-26 05:40:37 +00:00
imx28-cfa10037.dtb \
Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQEcBAABAgAGBQJQU4miAAoJEMhvYp4jgsXi1vMH/A4JJXe24cyo31rHJspZDSFg nnCbnGKfDEOIHwLA8C3OeJuhswMlP/vWlGC512QXL8903XpZ2VJe63f2CLo1mN7Z hg3JPWrp2VXZ/bqdMnUcw2CtlylrhyG9MUPapkcp+5Agjz2lwaJtRNL6LRRQX4Ei cWjsJtaFpRj1QraFna0hpTQNO640je6s1rAIJl6eNOuX08l12ZAGDUA+IUUsa1cA 0OGeOAjH6gmkpMI89j1VPPKVRLHIdP4QcxmAZCHJ2LtvylyrlmYskctpAYibobvt JPLnZgzMFAegnWtJhOYodhBJlfyypEeh2fsZVyDPowqRz9vaAWRjs6u/I4GYaME= =HR3H -----END PGP SIGNATURE----- Merge tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux into next/multiplatform Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. By Rob Herring (18) and Arnd Bergmann (1) via Rob Herring * tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux: ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ARM: orion: move custom gpio functions to orion-gpio.h ARM: shmobile: move custom gpio functions to sh-gpio.h ARM: pxa: use gpio_to_irq for sharppm_sl net: pxaficp_ir: add irq resources usb: pxa27x_udc: remove IRQ_USB define staging: ste_rmi4: remove gpio.h include Conflicts due to addition of bcm2835 and removal of pnx4008 in: arch/arm/Kconfig arch/arm/Makefile Conflicts due to new dtb targets, moved to arch/arm/boot/dts/Makefile in: arch/arm/mach-imx/Makefile.boot arch/arm/mach-mxs/Makefile.boot arch/arm/mach-tegra/Makefile.boot Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-21 05:53:18 +00:00
imx28-cfa10049.dtb \
ARM: mxs: dt: Add the Crystalfontz CFA-10055 device tree The CFA-10055 is yet another breakout board for the CFA-10036, and is basically a CFA-10037, with the screen and LCD controller found on the CFA-10049. Signed-off-by: Brian Lilly <brian@crystalfontz.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-13 13:43:44 +00:00
imx28-cfa10055.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-06 18:32:38 +00:00
imx28-evk.dtb \
imx28-m28evk.dtb \
ARM: mxs: Add SchulerControl SPS1 DTS file Add DTS file for this custom board. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-18 21:08:29 +00:00
imx28-sps1.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-06 18:32:38 +00:00
imx28-tx28.dtb
ARM: nomadik: initial devicetree support Support basic device tree boot on the Nomadik. Implement the support in the cpu file with the intent of deleting the board files later. At this stage IRQ controllers, system timer, l2x0 cache, UARTs and thus console boot is fully functional. Patch out the code adding devices by initcalls for now so as not to disturb the boot. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-04 23:29:31 +00:00
dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb
ARM: dtb: move all dtb targets to common Makefile Since the dtb targets have moved to arch/arm/boot/dts/Makefile, sweep the platforms that have had new targets added recently and move them over. While I was at it, I also made the dtb generation more generic, i.e. if the platform is enabled then all dtbs for that platform will be created. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Tony Lindgren <tony@atomide.com> Cc: David Brown <davidb@codeaurora.com> Cc: Barry Song <Baohua.Song@csr.com> Cc: Simon Horman <horms@verge.net.au> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Stephen Warren <swarren@wwwdotorg.org>
2012-09-21 04:11:45 +00:00
dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
ARM: dts: OMAP3: Add support for OMAP3430 SDP board Adds basic device-tree support for OMAP3430 SDP board which has 256MB of RAM, 128MB ONENAND flash, 256MB NAND flash and uses the TWL4030 power management IC. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-01-11 16:39:22 +00:00
omap3430-sdp.dtb \
ARM: dts: Add omap3-beagle.dts Add a minimal dts for original OMAP3430/3530 version of the Beagle board. This version of the Beagle board has 256MB of DDR and features the same TWL4030 power management IC (PMIC) as the Beagle board XM. Given that the Beagle and Beagle-XM boards use the same PMIC, move the definition of the VSIM regulator into the TWL4030.dtsi file so that we do not need to duplicate in the Beagle board dts file. This has been boot tested on an OMAP3530 Beagle board and verifing that the SD/MMC interface is working with a SD card. V2 changes - Rebased upon of devel-dt - Corrected copyright date in omap3-beagle.dts file - Added LED support after verifing that Beagle and Beagle XM have the same LED configuration Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-11 16:01:59 +00:00
omap3-beagle.dtb \
ARM: dts: Add minimal DT support for DevKit8000 DevKit8000 is a beagle board clone from Timll, sold by armkits.com. The DevKit8000 has RS232 serial port, LCD, DVI-D, S-Video, Ethernet, SD/MMC, keyboard, camera, SPI, I2C, USB and JTAG interface. Add the basic DT support for devkit8000. It includes: - twl4030 (PMIC) - MMC1 - I2C1 - leds Signed-off-by: Anil Kumar <anilk4.v@gmail.com> Tested-by: Thomas Weber <thomas@tomweber.eu> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-03-16 09:59:21 +00:00
omap3-devkit8000.dtb \
ARM: dtb: move all dtb targets to common Makefile Since the dtb targets have moved to arch/arm/boot/dts/Makefile, sweep the platforms that have had new targets added recently and move them over. While I was at it, I also made the dtb generation more generic, i.e. if the platform is enabled then all dtbs for that platform will be created. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Tony Lindgren <tony@atomide.com> Cc: David Brown <davidb@codeaurora.com> Cc: Barry Song <Baohua.Song@csr.com> Cc: Simon Horman <horms@verge.net.au> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Stephen Warren <swarren@wwwdotorg.org>
2012-09-21 04:11:45 +00:00
omap3-beagle-xm.dtb \
omap3-evm.dtb \
omap3-tobi.dtb \
ARM: dts: omap3: Add support for IGEPv2 board ISEE IGEPv2 is an TI OMAP3 SoC based embedded board. This patch adds an initial device tree support to boot an IGEPv2 from the MMC/SD. Currently is working everything that is supported by DT on OMAP3 SoCs (MMC/SD, GPIO LEDs, EEPROM, TWL4030 audio). Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com> [benoit.cousson@linaro.org: Update the Makefile for 3.8-rc2] Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2012-12-19 13:33:09 +00:00
omap3-igep0020.dtb \
ARM: dts: omap3: Add support for IGEP COM Module ISEE IGEP COM Module is an TI OMAP3 SoC computer on module. This patch adds an initial device tree support to boot an IGEP COM Module from the MMC/SD. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com> [b-cousson@ti.com: Update the Makefile for 3.8-rc2] Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2012-12-19 13:33:10 +00:00
omap3-igep0030.dtb \
ARM: dtb: move all dtb targets to common Makefile Since the dtb targets have moved to arch/arm/boot/dts/Makefile, sweep the platforms that have had new targets added recently and move them over. While I was at it, I also made the dtb generation more generic, i.e. if the platform is enabled then all dtbs for that platform will be created. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Tony Lindgren <tony@atomide.com> Cc: David Brown <davidb@codeaurora.com> Cc: Barry Song <Baohua.Song@csr.com> Cc: Simon Horman <horms@verge.net.au> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Stephen Warren <swarren@wwwdotorg.org>
2012-09-21 04:11:45 +00:00
omap4-panda.dtb \
ARM: dts: Add build target for omap4-panda-a4 Commit 0d9250c (ARM: dts: omap4-panda: Add pinmux configuration for HDMI) added a new device-tree source file for Rev A4 of the OMAP4430 Panda board but it did not add this version to the makefile. Hence, add this file to the makefile. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-14 21:55:39 +00:00
omap4-panda-a4.dtb \
ARM: dts: OMAP: Rename pandaES and var_som for consistency Rename the files to have names consistent across OMAP boards. Update the Makefile to use the new name. Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-10-24 10:31:34 +00:00
omap4-panda-es.dtb \
omap4-var-som.dtb \
ARM: dtb: move all dtb targets to common Makefile Since the dtb targets have moved to arch/arm/boot/dts/Makefile, sweep the platforms that have had new targets added recently and move them over. While I was at it, I also made the dtb generation more generic, i.e. if the platform is enabled then all dtbs for that platform will be created. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Tony Lindgren <tony@atomide.com> Cc: David Brown <davidb@codeaurora.com> Cc: Barry Song <Baohua.Song@csr.com> Cc: Simon Horman <horms@verge.net.au> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Stephen Warren <swarren@wwwdotorg.org>
2012-09-21 04:11:45 +00:00
omap4-sdp.dtb \
ARM: OMAP2+: Add am335x evm and bone targets to common Makefile This adds am335x-evm and am335x-bone dtb targets to 'make dtbs', just like other platforms. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-24 18:31:31 +00:00
omap5-evm.dtb \
am335x-evm.dtb \
ARM: dts: Makefile: Add the am335x-evmsk target in dtbs list The EVMSK was not built with the 'make dtbs' command. Add the missing entry in the dts Makefile. Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-11-06 14:52:23 +00:00
am335x-evmsk.dtb \
ARM: OMAP2+: Add am335x evm and bone targets to common Makefile This adds am335x-evm and am335x-bone dtb targets to 'make dtbs', just like other platforms. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-24 18:31:31 +00:00
am335x-bone.dtb
arm: orion5x: convert 'LaCie Ethernet Disk mini v2' to Device Tree This commit converts the 'LaCie Ethernet Disk mini v2' board to the Device Tree. All devices that have existing Device Tree bindings are converted over to the Device Tree, the other devices remain instantiated in the old way, until the respective drivers get the needed Device Tree bindings. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested by: Maxime Hadjinlian <mhadjinlian@lacie.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-16 15:39:46 +00:00
dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
ARM: dtb: move all dtb targets to common Makefile Since the dtb targets have moved to arch/arm/boot/dts/Makefile, sweep the platforms that have had new targets added recently and move them over. While I was at it, I also made the dtb generation more generic, i.e. if the platform is enabled then all dtbs for that platform will be created. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Tony Lindgren <tony@atomide.com> Cc: David Brown <davidb@codeaurora.com> Cc: Barry Song <Baohua.Song@csr.com> Cc: Simon Horman <horms@verge.net.au> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Stephen Warren <swarren@wwwdotorg.org>
2012-09-21 04:11:45 +00:00
dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
ARM: dts: add missing ux500 device trees This adds hrefprev60, hrefv60plus and ccu9540 to device trees compiled during build. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
2012-11-26 10:34:30 +00:00
dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \
hrefprev60.dtb \
hrefv60plus.dtb \
ccu9540.dtb
ARM: dtb: move all dtb targets to common Makefile Since the dtb targets have moved to arch/arm/boot/dts/Makefile, sweep the platforms that have had new targets added recently and move them over. While I was at it, I also made the dtb generation more generic, i.e. if the platform is enabled then all dtbs for that platform will be created. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Tony Lindgren <tony@atomide.com> Cc: David Brown <davidb@codeaurora.com> Cc: Barry Song <Baohua.Song@csr.com> Cc: Simon Horman <horms@verge.net.au> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Stephen Warren <swarren@wwwdotorg.org>
2012-09-21 04:11:45 +00:00
dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
r8a7740-armadillo800eva.dtb \
ARM: shmobile: add R-Car M1A Bock-W platform support Add basic Bock-W board support More devices will be added on top of this patch after PICNTRL and clock framework are in better shape. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-21 10:03:38 +00:00
r8a7778-bockw.dtb \
ARM: shmobile: marzen: Reference DT implementation Provide alternate board code for the marzen to demonstrate how DT may be used given the current state of driver device tree support. This is intended to act as a reference for mach-shmobile developers. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-29 02:40:18 +00:00
r8a7779-marzen-reference.dtb \
ARM: shmobile: Initial r8a7790 Lager board support Lager base board support making use of 2 GiB of memory, the r8a7790 SoC with the SCIF0 serial port and CA15 with ARM architected timer. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-29 08:49:37 +00:00
r8a7790-lager.dtb \
ARM: mach-shmobile: Use DT_MACHINE for mackerel Use DT_MACHINE_START() on the sh7372 based mackerel board. Also include a tiny DTS file to describe the board and update the Kconfig dependencies to select CONFIG_USE_OF. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-10-24 05:48:00 +00:00
sh73a0-kzm9g.dtb \
ARM: shmobile: kzm9g: Reference DT implementation Provide alternate board code for the kzm9g to demonstrate how DT may be used given the current state of driver device tree support. This is intended to act as a reference for mach-shmobile developers. Some notes: * Brings up the GIC interrupt handler using device tree * Brings up the following device using device tree: - MMCIF (MMC) * Does not bring up the INTC interrupt controller at all, thus external devices may not be used. In particular, the SMSC ethernet device may not be used and thus NFS root may not be used. * Uses existing C code and not device tree to initialise the following, which are needed for a working board: - SCIF (Serial) - CMT (Clock) - PFC (GPIO) To use this alternate board code instead of the normal board code, CONFIG_MACH_KZM9G_REFERENCE should be selected in the kernel config. And the sh73a0-kzm9g-reference.dtb flattened device tree blob should be used. Includes fix by Thierry Reding to no longer use gic_handle_irq() Includes fixes by Guennadi Liakhovetski for recent pinmux changes. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-11-21 15:34:25 +00:00
sh73a0-kzm9g-reference.dtb \
ARM: shmobile: APE6EVM base support V3 of APE6EVM base board support making use of 1 GiB of memory, the SCIFA0 serial port and ARM architected timer. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-29 08:00:02 +00:00
r8a73a4-ape6evm.dtb \
ARM: mach-shmobile: Use DT_MACHINE for mackerel Use DT_MACHINE_START() on the sh7372 based mackerel board. Also include a tiny DTS file to describe the board and update the Kconfig dependencies to select CONFIG_USE_OF. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2012-10-24 05:48:00 +00:00
sh7372-mackerel.dtb
arm: socfpga: Add entries to enable make dtbs socfpga Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Tested-by: Pavel Machek <pavel@denx.de> Reviewed-by: Pavel Machek <pavel@denx.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Cc: Pavel Machek <pavel@denx.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-02-11 23:30:31 +00:00
dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \
socfpga_vt.dtb
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-06 18:32:38 +00:00
dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \
spear1340-evb.dtb
dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
spear310-evb.dtb \
ARM: SPEAr320: DT: Add SPEAr 320 HMI board support This adds support for SPEAr320-HMI board. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2012-08-08 23:20:11 +00:00
spear320-evb.dtb \
spear320-hmi.dtb
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-06 18:32:38 +00:00
dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
ARM: sunxi: Fix Mini X-plus device tree build Commit b00adbe0 ("ARM: sunxi: Rename uart nodes to serial") changed the node names in the DTSI, changes that were not accordingly made to the Mini X-Plus device tree. This breakage slipped through because it was not properly declared in the Makefile. Fix both issues. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-04-18 20:44:29 +00:00
dtb-$(CONFIG_ARCH_SUNXI) += \
sun4i-a10-cubieboard.dtb \
sun4i-a10-mini-xplus.dtb \
ARM: sunxi: Add device tree for Miniand Hackberry Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-01-08 18:40:59 +00:00
sun4i-a10-hackberry.dtb \
ARM: sunxi: Change device tree naming scheme for sunxi There is several different SoCs sharing the sun5i codename: A10s, A12 and A13. Since there is enough differences to not consider those the same SoCs, change a bit the naming scheme to reflect this. Moreover, some boards like the olinuxino come in A10s and A13 variants, which also share the same SoC codename. So change the naming scheme to reflect both the codename and the market name of the SoCs used in the dtsi and in the board files Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-12-12 16:08:23 +00:00
sun5i-a13-olinuxino.dtb
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-06 18:32:38 +00:00
dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
ARM: tegra: Add Toradex Iris carrier board DT with T20 512MB COM This adds the device tree for the Toradex Iris carrier board used together with a Colibri T20 512MB COM. The Iris has the following features, in brackets the current status: - DVI and VGA output through DVI-I connector (DVI-D enabled and tested) - LVDS output - 1 USB host port (enabled and tested) - 1 USB OTG port (enabled) - 100 MBit Ethernet (enabled and tested) - 5 UART ports (2 on 10way headers enabled and tested) - 1 MicroSD Slot (enabled and tested) - Audio connectors (enabled, only HP out and Line-in tested) - i2c RTC - GPIO connector (enabled, only sparsely tested) - external i2c bus - 4 PWM out - analog in Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-22 21:46:09 +00:00
tegra20-iris-512.dtb \
Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQEcBAABAgAGBQJQU4miAAoJEMhvYp4jgsXi1vMH/A4JJXe24cyo31rHJspZDSFg nnCbnGKfDEOIHwLA8C3OeJuhswMlP/vWlGC512QXL8903XpZ2VJe63f2CLo1mN7Z hg3JPWrp2VXZ/bqdMnUcw2CtlylrhyG9MUPapkcp+5Agjz2lwaJtRNL6LRRQX4Ei cWjsJtaFpRj1QraFna0hpTQNO640je6s1rAIJl6eNOuX08l12ZAGDUA+IUUsa1cA 0OGeOAjH6gmkpMI89j1VPPKVRLHIdP4QcxmAZCHJ2LtvylyrlmYskctpAYibobvt JPLnZgzMFAegnWtJhOYodhBJlfyypEeh2fsZVyDPowqRz9vaAWRjs6u/I4GYaME= =HR3H -----END PGP SIGNATURE----- Merge tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux into next/multiplatform Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. By Rob Herring (18) and Arnd Bergmann (1) via Rob Herring * tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux: ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ARM: orion: move custom gpio functions to orion-gpio.h ARM: shmobile: move custom gpio functions to sh-gpio.h ARM: pxa: use gpio_to_irq for sharppm_sl net: pxaficp_ir: add irq resources usb: pxa27x_udc: remove IRQ_USB define staging: ste_rmi4: remove gpio.h include Conflicts due to addition of bcm2835 and removal of pnx4008 in: arch/arm/Kconfig arch/arm/Makefile Conflicts due to new dtb targets, moved to arch/arm/boot/dts/Makefile in: arch/arm/mach-imx/Makefile.boot arch/arm/mach-mxs/Makefile.boot arch/arm/mach-tegra/Makefile.boot Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-21 05:53:18 +00:00
tegra20-medcom-wide.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-06 18:32:38 +00:00
tegra20-paz00.dtb \
Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQEcBAABAgAGBQJQU4miAAoJEMhvYp4jgsXi1vMH/A4JJXe24cyo31rHJspZDSFg nnCbnGKfDEOIHwLA8C3OeJuhswMlP/vWlGC512QXL8903XpZ2VJe63f2CLo1mN7Z hg3JPWrp2VXZ/bqdMnUcw2CtlylrhyG9MUPapkcp+5Agjz2lwaJtRNL6LRRQX4Ei cWjsJtaFpRj1QraFna0hpTQNO640je6s1rAIJl6eNOuX08l12ZAGDUA+IUUsa1cA 0OGeOAjH6gmkpMI89j1VPPKVRLHIdP4QcxmAZCHJ2LtvylyrlmYskctpAYibobvt JPLnZgzMFAegnWtJhOYodhBJlfyypEeh2fsZVyDPowqRz9vaAWRjs6u/I4GYaME= =HR3H -----END PGP SIGNATURE----- Merge tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux into next/multiplatform Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. By Rob Herring (18) and Arnd Bergmann (1) via Rob Herring * tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux: ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ARM: orion: move custom gpio functions to orion-gpio.h ARM: shmobile: move custom gpio functions to sh-gpio.h ARM: pxa: use gpio_to_irq for sharppm_sl net: pxaficp_ir: add irq resources usb: pxa27x_udc: remove IRQ_USB define staging: ste_rmi4: remove gpio.h include Conflicts due to addition of bcm2835 and removal of pnx4008 in: arch/arm/Kconfig arch/arm/Makefile Conflicts due to new dtb targets, moved to arch/arm/boot/dts/Makefile in: arch/arm/mach-imx/Makefile.boot arch/arm/mach-mxs/Makefile.boot arch/arm/mach-tegra/Makefile.boot Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-21 05:53:18 +00:00
tegra20-plutux.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-06 18:32:38 +00:00
tegra20-seaboard.dtb \
Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQEcBAABAgAGBQJQU4miAAoJEMhvYp4jgsXi1vMH/A4JJXe24cyo31rHJspZDSFg nnCbnGKfDEOIHwLA8C3OeJuhswMlP/vWlGC512QXL8903XpZ2VJe63f2CLo1mN7Z hg3JPWrp2VXZ/bqdMnUcw2CtlylrhyG9MUPapkcp+5Agjz2lwaJtRNL6LRRQX4Ei cWjsJtaFpRj1QraFna0hpTQNO640je6s1rAIJl6eNOuX08l12ZAGDUA+IUUsa1cA 0OGeOAjH6gmkpMI89j1VPPKVRLHIdP4QcxmAZCHJ2LtvylyrlmYskctpAYibobvt JPLnZgzMFAegnWtJhOYodhBJlfyypEeh2fsZVyDPowqRz9vaAWRjs6u/I4GYaME= =HR3H -----END PGP SIGNATURE----- Merge tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux into next/multiplatform Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. By Rob Herring (18) and Arnd Bergmann (1) via Rob Herring * tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux: ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ARM: orion: move custom gpio functions to orion-gpio.h ARM: shmobile: move custom gpio functions to sh-gpio.h ARM: pxa: use gpio_to_irq for sharppm_sl net: pxaficp_ir: add irq resources usb: pxa27x_udc: remove IRQ_USB define staging: ste_rmi4: remove gpio.h include Conflicts due to addition of bcm2835 and removal of pnx4008 in: arch/arm/Kconfig arch/arm/Makefile Conflicts due to new dtb targets, moved to arch/arm/boot/dts/Makefile in: arch/arm/mach-imx/Makefile.boot arch/arm/mach-mxs/Makefile.boot arch/arm/mach-tegra/Makefile.boot Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-21 05:53:18 +00:00
tegra20-tec.dtb \
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-06 18:32:38 +00:00
tegra20-trimslice.dtb \
tegra20-ventana.dtb \
tegra20-whistler.dtb \
ARM: DT: tegra: Add Tegra30 Beaver board support This patch adds support for Tegra30 Beaver board in upstream kernel. Beaver board is a Tegra30 SoC based development board, it has following features: - T30 or T33 SoC (Qual core ARM Cortex A9) - 2 GB DDR3L - 16 GB EMMC - 1 SD slot - 1 USB Standart A port and 1 USB micro AB port - PCI-E Gig Ethernet - Audio input/output - SATA port - HDMI output - UART and JTAG Signed-off-by: Bryan Wu <pengw@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-02 23:53:51 +00:00
tegra30-beaver.dtb \
Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQEcBAABAgAGBQJQU4miAAoJEMhvYp4jgsXi1vMH/A4JJXe24cyo31rHJspZDSFg nnCbnGKfDEOIHwLA8C3OeJuhswMlP/vWlGC512QXL8903XpZ2VJe63f2CLo1mN7Z hg3JPWrp2VXZ/bqdMnUcw2CtlylrhyG9MUPapkcp+5Agjz2lwaJtRNL6LRRQX4Ei cWjsJtaFpRj1QraFna0hpTQNO640je6s1rAIJl6eNOuX08l12ZAGDUA+IUUsa1cA 0OGeOAjH6gmkpMI89j1VPPKVRLHIdP4QcxmAZCHJ2LtvylyrlmYskctpAYibobvt JPLnZgzMFAegnWtJhOYodhBJlfyypEeh2fsZVyDPowqRz9vaAWRjs6u/I4GYaME= =HR3H -----END PGP SIGNATURE----- Merge tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux into next/multiplatform Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. By Rob Herring (18) and Arnd Bergmann (1) via Rob Herring * tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux: ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ARM: orion: move custom gpio functions to orion-gpio.h ARM: shmobile: move custom gpio functions to sh-gpio.h ARM: pxa: use gpio_to_irq for sharppm_sl net: pxaficp_ir: add irq resources usb: pxa27x_udc: remove IRQ_USB define staging: ste_rmi4: remove gpio.h include Conflicts due to addition of bcm2835 and removal of pnx4008 in: arch/arm/Kconfig arch/arm/Makefile Conflicts due to new dtb targets, moved to arch/arm/boot/dts/Makefile in: arch/arm/mach-imx/Makefile.boot arch/arm/mach-mxs/Makefile.boot arch/arm/mach-tegra/Makefile.boot Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-21 05:53:18 +00:00
tegra30-cardhu-a02.dtb \
ARM: dt: tegra114: Add new board, Dalmore Add a new evaluation board, Dalmore for Tegra 114 family. Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-24 01:10:24 +00:00
tegra30-cardhu-a04.dtb \
ARM: dt: tegra114: Add new board, Pluto Add a new evaluation board, Pluto for Tegra 114 family. Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-24 01:10:25 +00:00
tegra114-dalmore.dtb \
tegra114-pluto.dtb
ARM: versatile: add versatile dtbs to dtbs target Add the versatile platform dtbs to the dtbs make rule. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-03-14 02:31:42 +00:00
dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \
versatile-pb.dtb
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-06 18:32:38 +00:00
dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \
vexpress-v2p-ca9.dtb \
vexpress-v2p-ca15-tc1.dtb \
xen: move the xenvm machine to mach-virt xenvm is based on mach-vexpress, move it to mach-virt. Changes in v4: - update the dts Makefile too. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> CC: Marc Zyngier <marc.zyngier@arm.com> CC: will.deacon@arm.com CC: arnd@arndb.de CC: rob.herring@calxeda.com
2013-04-23 14:51:11 +00:00
vexpress-v2p-ca15_a7.dtb
dtb-$(CONFIG_ARCH_VIRT) += xenvm-4.2.dtb
dtb: Add arch-vt8500 board files to arch/arm/boot/dts/Makefile Add board files (vt8500-bv07, wm8505-ref and wm8650-mid) to allow 'make dtbs' on arch-vt8500. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-10-07 01:14:41 +00:00
dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
wm8505-ref.dtb \
dts: vt8500: Add initial dts support for WM8850 This patch adds a soc dtsi for the Wondermedia WM8850. A board dts file is also included for the W70v2 tablet, with support for all the drivers currently in mainline. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-19 06:44:28 +00:00
wm8650-mid.dtb \
wm8850-w70v2.dtb
ARM: zynq: dts: split up device tree The purpose of the created zynq-7000.dtsi file is to describe the hardware common to all Zynq 7000-based boards. Also, get rid of the zynq-ep107 device tree, since it is not hardware anyone can purchase. Add a zc702 dts file based on the zynq-7000.dtsi. Add it to the dts/Makefile so it is built with the 'dtbs' target. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
2012-10-31 18:24:48 +00:00
dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-06 18:32:38 +00:00
ARM: dt: change .dtb build rules to build in dts directory The current rules have the .dtb files build in a different directory from the .dts files. The only reason for this is that it was what PowerPC has done historically. This patch changes ARM to use the generic dtb rule which builds .dtb files in the same directory as the source .dts. Cc: Russell King <linux@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Olof Johansson <olof@lixom.net> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Grant Likely <grant.likely@secretlab.ca> [swarren: added rm command for old stale .dtb files] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-11-27 23:29:11 +00:00
targets += dtbs
ARM: dts: prevent *.dtb from always being rebuilt if_changed (used by the *.dts->*.dtc rule) rebuilds files if they aren't contained in $(targets). (make V=2 indicates this). Add $(dtb-y) to $(targets) to prevent *.dtb from always being rebuilt. This fixes a regression introduced by the .dtb rule rework in 499cd82 "ARM: dt: change .dtb build rules to build in dts directory". Reported-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-12-29 00:42:46 +00:00
targets += $(dtb-y)
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
2012-09-06 18:32:38 +00:00
endif
ARM: dt: change .dtb build rules to build in dts directory The current rules have the .dtb files build in a different directory from the .dts files. The only reason for this is that it was what PowerPC has done historically. This patch changes ARM to use the generic dtb rule which builds .dtb files in the same directory as the source .dts. Cc: Russell King <linux@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Olof Johansson <olof@lixom.net> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Grant Likely <grant.likely@secretlab.ca> [swarren: added rm command for old stale .dtb files] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-11-27 23:29:11 +00:00
# *.dtb used to be generated in the directory above. Clean out the
# old build results so people don't accidentally use them.
dtbs: $(addprefix $(obj)/, $(dtb-y))
$(Q)rm -f $(obj)/../*.dtb
clean-files := *.dtb
Reference in New Issue Copy Permalink