leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
e47a118b88
linux/arch/arm/boot/dts/sh73a0.dtsi

265 lines
6.8 KiB
Plaintext
Raw Normal View History

ARM: mach-shmobile: sh73a0: Allow initialisation of GIC by DT This allows the GIC interrupt controller of the sh73a0 SoC to be initialised using a flattened device tree blob. It does not allow the INTC interrupt controller which is also present on the sh73a0 SoC to be enabled via device tree. Nor does it handle sharing of interrupts between the GIC and INTC interrupt controllers. This limits the usefulness of this code to applications which only wish to access devices which use interrupts that can be handled by the GIC interrupt controller. Other applications should, for now, continue using non-device tree initialisation of the sh72a0 interrupt controllers. Includes update to use irqchip_init() by Thierry Reding Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-11-21 12:12:43 +00:00
/*
* Device Tree Source for the SH73A0 SoC
*
* Copyright (C) 2012 Renesas Solutions Corp.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/include/ "skeleton.dtsi"
ARM: shmobile: Use interrupt macros in SoC DT files Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-19 02:18:25 +00:00
#include <dt-bindings/interrupt-controller/irq.h>
ARM: mach-shmobile: sh73a0: Allow initialisation of GIC by DT This allows the GIC interrupt controller of the sh73a0 SoC to be initialised using a flattened device tree blob. It does not allow the INTC interrupt controller which is also present on the sh73a0 SoC to be enabled via device tree. Nor does it handle sharing of interrupts between the GIC and INTC interrupt controllers. This limits the usefulness of this code to applications which only wish to access devices which use interrupts that can be handled by the GIC interrupt controller. Other applications should, for now, continue using non-device tree initialisation of the sh72a0 interrupt controllers. Includes update to use irqchip_init() by Thierry Reding Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-11-21 12:12:43 +00:00
/ {
compatible = "renesas,sh73a0";
cpus {
ARM: mach-shmobile: sh73a0: Add reg and device_type properties to cpus Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-28 00:41:40 +00:00
#address-cells = <1>;
#size-cells = <0>;
ARM: mach-shmobile: sh73a0: Allow initialisation of GIC by DT This allows the GIC interrupt controller of the sh73a0 SoC to be initialised using a flattened device tree blob. It does not allow the INTC interrupt controller which is also present on the sh73a0 SoC to be enabled via device tree. Nor does it handle sharing of interrupts between the GIC and INTC interrupt controllers. This limits the usefulness of this code to applications which only wish to access devices which use interrupts that can be handled by the GIC interrupt controller. Other applications should, for now, continue using non-device tree initialisation of the sh72a0 interrupt controllers. Includes update to use irqchip_init() by Thierry Reding Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-11-21 12:12:43 +00:00
cpu@0 {
ARM: mach-shmobile: sh73a0: Add reg and device_type properties to cpus Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-28 00:41:40 +00:00
device_type = "cpu";
ARM: mach-shmobile: sh73a0: Allow initialisation of GIC by DT This allows the GIC interrupt controller of the sh73a0 SoC to be initialised using a flattened device tree blob. It does not allow the INTC interrupt controller which is also present on the sh73a0 SoC to be enabled via device tree. Nor does it handle sharing of interrupts between the GIC and INTC interrupt controllers. This limits the usefulness of this code to applications which only wish to access devices which use interrupts that can be handled by the GIC interrupt controller. Other applications should, for now, continue using non-device tree initialisation of the sh72a0 interrupt controllers. Includes update to use irqchip_init() by Thierry Reding Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-11-21 12:12:43 +00:00
compatible = "arm,cortex-a9";
ARM: mach-shmobile: sh73a0: Add reg and device_type properties to cpus Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-28 00:41:40 +00:00
reg = <0>;
ARM: mach-shmobile: sh73a0: Allow initialisation of GIC by DT This allows the GIC interrupt controller of the sh73a0 SoC to be initialised using a flattened device tree blob. It does not allow the INTC interrupt controller which is also present on the sh73a0 SoC to be enabled via device tree. Nor does it handle sharing of interrupts between the GIC and INTC interrupt controllers. This limits the usefulness of this code to applications which only wish to access devices which use interrupts that can be handled by the GIC interrupt controller. Other applications should, for now, continue using non-device tree initialisation of the sh72a0 interrupt controllers. Includes update to use irqchip_init() by Thierry Reding Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-11-21 12:12:43 +00:00
};
cpu@1 {
ARM: mach-shmobile: sh73a0: Add reg and device_type properties to cpus Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-28 00:41:40 +00:00
device_type = "cpu";
ARM: mach-shmobile: sh73a0: Allow initialisation of GIC by DT This allows the GIC interrupt controller of the sh73a0 SoC to be initialised using a flattened device tree blob. It does not allow the INTC interrupt controller which is also present on the sh73a0 SoC to be enabled via device tree. Nor does it handle sharing of interrupts between the GIC and INTC interrupt controllers. This limits the usefulness of this code to applications which only wish to access devices which use interrupts that can be handled by the GIC interrupt controller. Other applications should, for now, continue using non-device tree initialisation of the sh72a0 interrupt controllers. Includes update to use irqchip_init() by Thierry Reding Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-11-21 12:12:43 +00:00
compatible = "arm,cortex-a9";
ARM: mach-shmobile: sh73a0: Add reg and device_type properties to cpus Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-28 00:41:40 +00:00
reg = <1>;
ARM: mach-shmobile: sh73a0: Allow initialisation of GIC by DT This allows the GIC interrupt controller of the sh73a0 SoC to be initialised using a flattened device tree blob. It does not allow the INTC interrupt controller which is also present on the sh73a0 SoC to be enabled via device tree. Nor does it handle sharing of interrupts between the GIC and INTC interrupt controllers. This limits the usefulness of this code to applications which only wish to access devices which use interrupts that can be handled by the GIC interrupt controller. Other applications should, for now, continue using non-device tree initialisation of the sh72a0 interrupt controllers. Includes update to use irqchip_init() by Thierry Reding Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-11-21 12:12:43 +00:00
};
};
gic: interrupt-controller@f0001000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#address-cells = <1>;
interrupt-controller;
reg = <0xf0001000 0x1000>,
<0xf0000100 0x100>;
};
ARM: mach-shmobile: sh73a0: Minimal setup using DT Allow a minimal setup of the sh73a0 SoC using a flattened device tree. In particular, Configure the i2c controllers using a flattened device tree. SCI serial controller and CMT clock source, whose drivers do not yet support configuration using a flattened device tree, are still configured using C code in order to allow booting of a board with this SoC. *** Please note that the clock initialisation scheme used in this patch does not currently work with SMP as there is a yet to be resolved lock-up in workqueue initialisation. CONFIG_SMP must be disabled when using this code. *** Includes update from Thierry Reding to no longer use gic_handle_irq() Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> fix
2012-11-21 13:00:15 +00:00
ARM: shmobile: sh73a0: add PMU information to sh73a0.dtsi Add PMU information to sh73a0.dtsi. With this included KZM9G DT reference may use the PMU. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-24 03:45:03 +00:00
pmu {
compatible = "arm,cortex-a9-pmu";
ARM: shmobile: Use interrupt macros in SoC DT files Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-19 02:18:25 +00:00
interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>,
<0 56 IRQ_TYPE_LEVEL_HIGH>;
ARM: shmobile: sh73a0: add PMU information to sh73a0.dtsi Add PMU information to sh73a0.dtsi. With this included KZM9G DT reference may use the PMU. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-24 03:45:03 +00:00
};
ARM: shmobile: sh73a0: add irqpin DT nodes Add DT nodes for the 4 irqpin interrupt controllers on sh73a0. We add them to sh73a0.dtsi, which is also used by configurations, doing all their device instantiation from board the .c code. We rely on the fact, that such configurations don't instantiate devices from the device-tree. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-21 16:05:40 +00:00
irqpin0: irqpin@e6900000 {
ARM: shmobile: Use sh73a0 suffix for INTC compat string Add "renesas,intc-irqpin-sh73a0" to the compatible string for the IRQ pins in case of sh73a0 INTC. This makes the INTC irqpin follow the same style as the other devices and also makes it more future proof. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-27 23:14:57 +00:00
compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
ARM: shmobile: sh73a0: add irqpin DT nodes Add DT nodes for the 4 irqpin interrupt controllers on sh73a0. We add them to sh73a0.dtsi, which is also used by configurations, doing all their device instantiation from board the .c code. We rely on the fact, that such configurations don't instantiate devices from the device-tree. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-21 16:05:40 +00:00
#interrupt-cells = <2>;
interrupt-controller;
reg = <0xe6900000 4>,
<0xe6900010 4>,
<0xe6900020 1>,
<0xe6900040 1>,
<0xe6900060 1>;
interrupt-parent = <&gic>;
ARM: shmobile: Use interrupt macros in SoC DT files Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-19 02:18:25 +00:00
interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH
0 2 IRQ_TYPE_LEVEL_HIGH
0 3 IRQ_TYPE_LEVEL_HIGH
0 4 IRQ_TYPE_LEVEL_HIGH
0 5 IRQ_TYPE_LEVEL_HIGH
0 6 IRQ_TYPE_LEVEL_HIGH
0 7 IRQ_TYPE_LEVEL_HIGH
0 8 IRQ_TYPE_LEVEL_HIGH>;
ARM: shmobile: sh73a0: add irqpin DT nodes Add DT nodes for the 4 irqpin interrupt controllers on sh73a0. We add them to sh73a0.dtsi, which is also used by configurations, doing all their device instantiation from board the .c code. We rely on the fact, that such configurations don't instantiate devices from the device-tree. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-21 16:05:40 +00:00
};
irqpin1: irqpin@e6900004 {
ARM: shmobile: Use sh73a0 suffix for INTC compat string Add "renesas,intc-irqpin-sh73a0" to the compatible string for the IRQ pins in case of sh73a0 INTC. This makes the INTC irqpin follow the same style as the other devices and also makes it more future proof. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-27 23:14:57 +00:00
compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
ARM: shmobile: sh73a0: add irqpin DT nodes Add DT nodes for the 4 irqpin interrupt controllers on sh73a0. We add them to sh73a0.dtsi, which is also used by configurations, doing all their device instantiation from board the .c code. We rely on the fact, that such configurations don't instantiate devices from the device-tree. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-21 16:05:40 +00:00
#interrupt-cells = <2>;
interrupt-controller;
reg = <0xe6900004 4>,
<0xe6900014 4>,
<0xe6900024 1>,
<0xe6900044 1>,
<0xe6900064 1>;
interrupt-parent = <&gic>;
ARM: shmobile: Use interrupt macros in SoC DT files Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-19 02:18:25 +00:00
interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH
0 10 IRQ_TYPE_LEVEL_HIGH
0 11 IRQ_TYPE_LEVEL_HIGH
0 12 IRQ_TYPE_LEVEL_HIGH
0 13 IRQ_TYPE_LEVEL_HIGH
0 14 IRQ_TYPE_LEVEL_HIGH
0 15 IRQ_TYPE_LEVEL_HIGH
0 16 IRQ_TYPE_LEVEL_HIGH>;
ARM: shmobile: sh73a0: add irqpin DT nodes Add DT nodes for the 4 irqpin interrupt controllers on sh73a0. We add them to sh73a0.dtsi, which is also used by configurations, doing all their device instantiation from board the .c code. We rely on the fact, that such configurations don't instantiate devices from the device-tree. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-21 16:05:40 +00:00
control-parent;
};
irqpin2: irqpin@e6900008 {
ARM: shmobile: Use sh73a0 suffix for INTC compat string Add "renesas,intc-irqpin-sh73a0" to the compatible string for the IRQ pins in case of sh73a0 INTC. This makes the INTC irqpin follow the same style as the other devices and also makes it more future proof. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-27 23:14:57 +00:00
compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
ARM: shmobile: sh73a0: add irqpin DT nodes Add DT nodes for the 4 irqpin interrupt controllers on sh73a0. We add them to sh73a0.dtsi, which is also used by configurations, doing all their device instantiation from board the .c code. We rely on the fact, that such configurations don't instantiate devices from the device-tree. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-21 16:05:40 +00:00
#interrupt-cells = <2>;
interrupt-controller;
reg = <0xe6900008 4>,
<0xe6900018 4>,
<0xe6900028 1>,
<0xe6900048 1>,
<0xe6900068 1>;
interrupt-parent = <&gic>;
ARM: shmobile: Use interrupt macros in SoC DT files Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-19 02:18:25 +00:00
interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH
0 18 IRQ_TYPE_LEVEL_HIGH
0 19 IRQ_TYPE_LEVEL_HIGH
0 20 IRQ_TYPE_LEVEL_HIGH
0 21 IRQ_TYPE_LEVEL_HIGH
0 22 IRQ_TYPE_LEVEL_HIGH
0 23 IRQ_TYPE_LEVEL_HIGH
0 24 IRQ_TYPE_LEVEL_HIGH>;
ARM: shmobile: sh73a0: add irqpin DT nodes Add DT nodes for the 4 irqpin interrupt controllers on sh73a0. We add them to sh73a0.dtsi, which is also used by configurations, doing all their device instantiation from board the .c code. We rely on the fact, that such configurations don't instantiate devices from the device-tree. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-21 16:05:40 +00:00
};
irqpin3: irqpin@e690000c {
ARM: shmobile: Use sh73a0 suffix for INTC compat string Add "renesas,intc-irqpin-sh73a0" to the compatible string for the IRQ pins in case of sh73a0 INTC. This makes the INTC irqpin follow the same style as the other devices and also makes it more future proof. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-27 23:14:57 +00:00
compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
ARM: shmobile: sh73a0: add irqpin DT nodes Add DT nodes for the 4 irqpin interrupt controllers on sh73a0. We add them to sh73a0.dtsi, which is also used by configurations, doing all their device instantiation from board the .c code. We rely on the fact, that such configurations don't instantiate devices from the device-tree. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-21 16:05:40 +00:00
#interrupt-cells = <2>;
interrupt-controller;
reg = <0xe690000c 4>,
<0xe690001c 4>,
<0xe690002c 1>,
<0xe690004c 1>,
<0xe690006c 1>;
interrupt-parent = <&gic>;
ARM: shmobile: Use interrupt macros in SoC DT files Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-19 02:18:25 +00:00
interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH
0 26 IRQ_TYPE_LEVEL_HIGH
0 27 IRQ_TYPE_LEVEL_HIGH
0 28 IRQ_TYPE_LEVEL_HIGH
0 29 IRQ_TYPE_LEVEL_HIGH
0 30 IRQ_TYPE_LEVEL_HIGH
0 31 IRQ_TYPE_LEVEL_HIGH
0 32 IRQ_TYPE_LEVEL_HIGH>;
ARM: shmobile: sh73a0: add irqpin DT nodes Add DT nodes for the 4 irqpin interrupt controllers on sh73a0. We add them to sh73a0.dtsi, which is also used by configurations, doing all their device instantiation from board the .c code. We rely on the fact, that such configurations don't instantiate devices from the device-tree. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-21 16:05:40 +00:00
};
ARM: shmobile: sh73a0: remove "0x" prefix from DT node names The convention for Device Tree node names is <device>@<hex-address>, where the part after '@' shouldn't contain the "0x" prefix. Fix the sh73a0.dtsi DT names. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-06 15:38:12 +00:00
i2c0: i2c@e6820000 {
ARM: mach-shmobile: sh73a0: Minimal setup using DT Allow a minimal setup of the sh73a0 SoC using a flattened device tree. In particular, Configure the i2c controllers using a flattened device tree. SCI serial controller and CMT clock source, whose drivers do not yet support configuration using a flattened device tree, are still configured using C code in order to allow booting of a board with this SoC. *** Please note that the clock initialisation scheme used in this patch does not currently work with SMP as there is a yet to be resolved lock-up in workqueue initialisation. CONFIG_SMP must be disabled when using this code. *** Includes update from Thierry Reding to no longer use gic_handle_irq() Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> fix
2012-11-21 13:00:15 +00:00
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0xe6820000 0x425>;
interrupt-parent = <&gic>;
ARM: shmobile: Use interrupt macros in SoC DT files Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-19 02:18:25 +00:00
interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH
0 168 IRQ_TYPE_LEVEL_HIGH
0 169 IRQ_TYPE_LEVEL_HIGH
0 170 IRQ_TYPE_LEVEL_HIGH>;
ARM: shmobile: only enable used I2C interfaces in DT on all Renesas boards Currently all I2C interfaces in all *.dtsi files for various Renesas SoCs are enabled by default. Switch them all off and only enable populated I2C interfaces in board-specific *.dts files. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-26 11:06:01 +00:00
status = "disabled";
ARM: mach-shmobile: sh73a0: Minimal setup using DT Allow a minimal setup of the sh73a0 SoC using a flattened device tree. In particular, Configure the i2c controllers using a flattened device tree. SCI serial controller and CMT clock source, whose drivers do not yet support configuration using a flattened device tree, are still configured using C code in order to allow booting of a board with this SoC. *** Please note that the clock initialisation scheme used in this patch does not currently work with SMP as there is a yet to be resolved lock-up in workqueue initialisation. CONFIG_SMP must be disabled when using this code. *** Includes update from Thierry Reding to no longer use gic_handle_irq() Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> fix
2012-11-21 13:00:15 +00:00
};
ARM: shmobile: sh73a0: remove "0x" prefix from DT node names The convention for Device Tree node names is <device>@<hex-address>, where the part after '@' shouldn't contain the "0x" prefix. Fix the sh73a0.dtsi DT names. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-06 15:38:12 +00:00
i2c1: i2c@e6822000 {
ARM: mach-shmobile: sh73a0: Minimal setup using DT Allow a minimal setup of the sh73a0 SoC using a flattened device tree. In particular, Configure the i2c controllers using a flattened device tree. SCI serial controller and CMT clock source, whose drivers do not yet support configuration using a flattened device tree, are still configured using C code in order to allow booting of a board with this SoC. *** Please note that the clock initialisation scheme used in this patch does not currently work with SMP as there is a yet to be resolved lock-up in workqueue initialisation. CONFIG_SMP must be disabled when using this code. *** Includes update from Thierry Reding to no longer use gic_handle_irq() Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> fix
2012-11-21 13:00:15 +00:00
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0xe6822000 0x425>;
interrupt-parent = <&gic>;
ARM: shmobile: Use interrupt macros in SoC DT files Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-19 02:18:25 +00:00
interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH
0 52 IRQ_TYPE_LEVEL_HIGH
0 53 IRQ_TYPE_LEVEL_HIGH
0 54 IRQ_TYPE_LEVEL_HIGH>;
ARM: shmobile: only enable used I2C interfaces in DT on all Renesas boards Currently all I2C interfaces in all *.dtsi files for various Renesas SoCs are enabled by default. Switch them all off and only enable populated I2C interfaces in board-specific *.dts files. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-26 11:06:01 +00:00
status = "disabled";
ARM: mach-shmobile: sh73a0: Minimal setup using DT Allow a minimal setup of the sh73a0 SoC using a flattened device tree. In particular, Configure the i2c controllers using a flattened device tree. SCI serial controller and CMT clock source, whose drivers do not yet support configuration using a flattened device tree, are still configured using C code in order to allow booting of a board with this SoC. *** Please note that the clock initialisation scheme used in this patch does not currently work with SMP as there is a yet to be resolved lock-up in workqueue initialisation. CONFIG_SMP must be disabled when using this code. *** Includes update from Thierry Reding to no longer use gic_handle_irq() Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> fix
2012-11-21 13:00:15 +00:00
};
ARM: shmobile: sh73a0: remove "0x" prefix from DT node names The convention for Device Tree node names is <device>@<hex-address>, where the part after '@' shouldn't contain the "0x" prefix. Fix the sh73a0.dtsi DT names. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-06 15:38:12 +00:00
i2c2: i2c@e6824000 {
ARM: mach-shmobile: sh73a0: Minimal setup using DT Allow a minimal setup of the sh73a0 SoC using a flattened device tree. In particular, Configure the i2c controllers using a flattened device tree. SCI serial controller and CMT clock source, whose drivers do not yet support configuration using a flattened device tree, are still configured using C code in order to allow booting of a board with this SoC. *** Please note that the clock initialisation scheme used in this patch does not currently work with SMP as there is a yet to be resolved lock-up in workqueue initialisation. CONFIG_SMP must be disabled when using this code. *** Includes update from Thierry Reding to no longer use gic_handle_irq() Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> fix
2012-11-21 13:00:15 +00:00
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0xe6824000 0x425>;
interrupt-parent = <&gic>;
ARM: shmobile: Use interrupt macros in SoC DT files Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-19 02:18:25 +00:00
interrupts = <0 171 IRQ_TYPE_LEVEL_HIGH
0 172 IRQ_TYPE_LEVEL_HIGH
0 173 IRQ_TYPE_LEVEL_HIGH
0 174 IRQ_TYPE_LEVEL_HIGH>;
ARM: shmobile: only enable used I2C interfaces in DT on all Renesas boards Currently all I2C interfaces in all *.dtsi files for various Renesas SoCs are enabled by default. Switch them all off and only enable populated I2C interfaces in board-specific *.dts files. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-26 11:06:01 +00:00
status = "disabled";
ARM: mach-shmobile: sh73a0: Minimal setup using DT Allow a minimal setup of the sh73a0 SoC using a flattened device tree. In particular, Configure the i2c controllers using a flattened device tree. SCI serial controller and CMT clock source, whose drivers do not yet support configuration using a flattened device tree, are still configured using C code in order to allow booting of a board with this SoC. *** Please note that the clock initialisation scheme used in this patch does not currently work with SMP as there is a yet to be resolved lock-up in workqueue initialisation. CONFIG_SMP must be disabled when using this code. *** Includes update from Thierry Reding to no longer use gic_handle_irq() Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> fix
2012-11-21 13:00:15 +00:00
};
ARM: shmobile: sh73a0: remove "0x" prefix from DT node names The convention for Device Tree node names is <device>@<hex-address>, where the part after '@' shouldn't contain the "0x" prefix. Fix the sh73a0.dtsi DT names. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-06 15:38:12 +00:00
i2c3: i2c@e6826000 {
ARM: mach-shmobile: sh73a0: Minimal setup using DT Allow a minimal setup of the sh73a0 SoC using a flattened device tree. In particular, Configure the i2c controllers using a flattened device tree. SCI serial controller and CMT clock source, whose drivers do not yet support configuration using a flattened device tree, are still configured using C code in order to allow booting of a board with this SoC. *** Please note that the clock initialisation scheme used in this patch does not currently work with SMP as there is a yet to be resolved lock-up in workqueue initialisation. CONFIG_SMP must be disabled when using this code. *** Includes update from Thierry Reding to no longer use gic_handle_irq() Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> fix
2012-11-21 13:00:15 +00:00
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0xe6826000 0x425>;
interrupt-parent = <&gic>;
ARM: shmobile: Use interrupt macros in SoC DT files Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-19 02:18:25 +00:00
interrupts = <0 183 IRQ_TYPE_LEVEL_HIGH
0 184 IRQ_TYPE_LEVEL_HIGH
0 185 IRQ_TYPE_LEVEL_HIGH
0 186 IRQ_TYPE_LEVEL_HIGH>;
ARM: shmobile: only enable used I2C interfaces in DT on all Renesas boards Currently all I2C interfaces in all *.dtsi files for various Renesas SoCs are enabled by default. Switch them all off and only enable populated I2C interfaces in board-specific *.dts files. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-26 11:06:01 +00:00
status = "disabled";
ARM: mach-shmobile: sh73a0: Minimal setup using DT Allow a minimal setup of the sh73a0 SoC using a flattened device tree. In particular, Configure the i2c controllers using a flattened device tree. SCI serial controller and CMT clock source, whose drivers do not yet support configuration using a flattened device tree, are still configured using C code in order to allow booting of a board with this SoC. *** Please note that the clock initialisation scheme used in this patch does not currently work with SMP as there is a yet to be resolved lock-up in workqueue initialisation. CONFIG_SMP must be disabled when using this code. *** Includes update from Thierry Reding to no longer use gic_handle_irq() Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> fix
2012-11-21 13:00:15 +00:00
};
ARM: shmobile: sh73a0: remove "0x" prefix from DT node names The convention for Device Tree node names is <device>@<hex-address>, where the part after '@' shouldn't contain the "0x" prefix. Fix the sh73a0.dtsi DT names. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-06 15:38:12 +00:00
i2c4: i2c@e6828000 {
ARM: mach-shmobile: sh73a0: Minimal setup using DT Allow a minimal setup of the sh73a0 SoC using a flattened device tree. In particular, Configure the i2c controllers using a flattened device tree. SCI serial controller and CMT clock source, whose drivers do not yet support configuration using a flattened device tree, are still configured using C code in order to allow booting of a board with this SoC. *** Please note that the clock initialisation scheme used in this patch does not currently work with SMP as there is a yet to be resolved lock-up in workqueue initialisation. CONFIG_SMP must be disabled when using this code. *** Includes update from Thierry Reding to no longer use gic_handle_irq() Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> fix
2012-11-21 13:00:15 +00:00
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0xe6828000 0x425>;
interrupt-parent = <&gic>;
ARM: shmobile: Use interrupt macros in SoC DT files Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-19 02:18:25 +00:00
interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH
0 188 IRQ_TYPE_LEVEL_HIGH
0 189 IRQ_TYPE_LEVEL_HIGH
0 190 IRQ_TYPE_LEVEL_HIGH>;
ARM: shmobile: only enable used I2C interfaces in DT on all Renesas boards Currently all I2C interfaces in all *.dtsi files for various Renesas SoCs are enabled by default. Switch them all off and only enable populated I2C interfaces in board-specific *.dts files. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-26 11:06:01 +00:00
status = "disabled";
ARM: mach-shmobile: sh73a0: Minimal setup using DT Allow a minimal setup of the sh73a0 SoC using a flattened device tree. In particular, Configure the i2c controllers using a flattened device tree. SCI serial controller and CMT clock source, whose drivers do not yet support configuration using a flattened device tree, are still configured using C code in order to allow booting of a board with this SoC. *** Please note that the clock initialisation scheme used in this patch does not currently work with SMP as there is a yet to be resolved lock-up in workqueue initialisation. CONFIG_SMP must be disabled when using this code. *** Includes update from Thierry Reding to no longer use gic_handle_irq() Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> fix
2012-11-21 13:00:15 +00:00
};
ARM: shmobile: sh73a0: move SDHI and MMCIF DT nodes to sh73a0.dtsi To avoid having to repeat common DT node properties in all .dts files move them to SoC's .dtsi file, setting their status to "disabled." Individual boards will pick up devices, that they want to use and change their DT node status to enabled. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-19 12:47:43 +00:00
ARM: shmobile: sh73a0: tidyup DT node naming According to ePAPR spec, this patch tidies up DT node name and related clock. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-22 02:36:22 +00:00
mmcif: mmc@e6bd0000 {
ARM: shmobile: sh73a0: move SDHI and MMCIF DT nodes to sh73a0.dtsi To avoid having to repeat common DT node properties in all .dts files move them to SoC's .dtsi file, setting their status to "disabled." Individual boards will pick up devices, that they want to use and change their DT node status to enabled. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-19 12:47:43 +00:00
compatible = "renesas,sh-mmcif";
reg = <0xe6bd0000 0x100>;
interrupt-parent = <&gic>;
ARM: shmobile: Use interrupt macros in SoC DT files Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-19 02:18:25 +00:00
interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH
0 141 IRQ_TYPE_LEVEL_HIGH>;
ARM: shmobile: sh73a0: move SDHI and MMCIF DT nodes to sh73a0.dtsi To avoid having to repeat common DT node properties in all .dts files move them to SoC's .dtsi file, setting their status to "disabled." Individual boards will pick up devices, that they want to use and change their DT node status to enabled. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-19 12:47:43 +00:00
reg-io-width = <4>;
status = "disabled";
};
ARM: shmobile: sh73a0: tidyup DT node naming According to ePAPR spec, this patch tidies up DT node name and related clock. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-22 02:36:22 +00:00
sdhi0: sd@ee100000 {
ARM: shmobile: sh73a0: fixup sdhi compatible name sh73a0 != r8a7740 Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-20 03:18:09 +00:00
compatible = "renesas,sdhi-sh73a0";
ARM: shmobile: sh73a0: move SDHI and MMCIF DT nodes to sh73a0.dtsi To avoid having to repeat common DT node properties in all .dts files move them to SoC's .dtsi file, setting their status to "disabled." Individual boards will pick up devices, that they want to use and change their DT node status to enabled. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-19 12:47:43 +00:00
reg = <0xee100000 0x100>;
interrupt-parent = <&gic>;
ARM: shmobile: Use interrupt macros in SoC DT files Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-19 02:18:25 +00:00
interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH
0 84 IRQ_TYPE_LEVEL_HIGH
0 85 IRQ_TYPE_LEVEL_HIGH>;
ARM: shmobile: kzm9g-reference: fix device-tree bindings and device names Fix several device-tree bindings, that haven't been updated for newest versions of respective drivers, and device names and pin numbers, left over from non-DT and old pinctrl versions. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-19 17:38:50 +00:00
cap-sd-highspeed;
ARM: shmobile: sh73a0: move SDHI and MMCIF DT nodes to sh73a0.dtsi To avoid having to repeat common DT node properties in all .dts files move them to SoC's .dtsi file, setting their status to "disabled." Individual boards will pick up devices, that they want to use and change their DT node status to enabled. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-19 12:47:43 +00:00
status = "disabled";
};
/* SDHI1 and SDHI2 have no CD pins, no need for CD IRQ */
ARM: shmobile: sh73a0: tidyup DT node naming According to ePAPR spec, this patch tidies up DT node name and related clock. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-22 02:36:22 +00:00
sdhi1: sd@ee120000 {
ARM: shmobile: sh73a0: fixup sdhi compatible name sh73a0 != r8a7740 Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-20 03:18:09 +00:00
compatible = "renesas,sdhi-sh73a0";
ARM: shmobile: sh73a0: move SDHI and MMCIF DT nodes to sh73a0.dtsi To avoid having to repeat common DT node properties in all .dts files move them to SoC's .dtsi file, setting their status to "disabled." Individual boards will pick up devices, that they want to use and change their DT node status to enabled. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-19 12:47:43 +00:00
reg = <0xee120000 0x100>;
interrupt-parent = <&gic>;
ARM: shmobile: Use interrupt macros in SoC DT files Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-19 02:18:25 +00:00
interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH
0 89 IRQ_TYPE_LEVEL_HIGH>;
ARM: shmobile: sh73a0: move SDHI and MMCIF DT nodes to sh73a0.dtsi To avoid having to repeat common DT node properties in all .dts files move them to SoC's .dtsi file, setting their status to "disabled." Individual boards will pick up devices, that they want to use and change their DT node status to enabled. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-19 12:47:43 +00:00
toshiba,mmc-wrprotect-disable;
ARM: shmobile: kzm9g-reference: fix device-tree bindings and device names Fix several device-tree bindings, that haven't been updated for newest versions of respective drivers, and device names and pin numbers, left over from non-DT and old pinctrl versions. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-19 17:38:50 +00:00
cap-sd-highspeed;
ARM: shmobile: sh73a0: move SDHI and MMCIF DT nodes to sh73a0.dtsi To avoid having to repeat common DT node properties in all .dts files move them to SoC's .dtsi file, setting their status to "disabled." Individual boards will pick up devices, that they want to use and change their DT node status to enabled. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-19 12:47:43 +00:00
status = "disabled";
};
ARM: shmobile: sh73a0: tidyup DT node naming According to ePAPR spec, this patch tidies up DT node name and related clock. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-22 02:36:22 +00:00
sdhi2: sd@ee140000 {
ARM: shmobile: sh73a0: fixup sdhi compatible name sh73a0 != r8a7740 Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-20 03:18:09 +00:00
compatible = "renesas,sdhi-sh73a0";
ARM: shmobile: sh73a0: move SDHI and MMCIF DT nodes to sh73a0.dtsi To avoid having to repeat common DT node properties in all .dts files move them to SoC's .dtsi file, setting their status to "disabled." Individual boards will pick up devices, that they want to use and change their DT node status to enabled. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-19 12:47:43 +00:00
reg = <0xee140000 0x100>;
interrupt-parent = <&gic>;
ARM: shmobile: Use interrupt macros in SoC DT files Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-19 02:18:25 +00:00
interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH
0 105 IRQ_TYPE_LEVEL_HIGH>;
ARM: shmobile: sh73a0: move SDHI and MMCIF DT nodes to sh73a0.dtsi To avoid having to repeat common DT node properties in all .dts files move them to SoC's .dtsi file, setting their status to "disabled." Individual boards will pick up devices, that they want to use and change their DT node status to enabled. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-19 12:47:43 +00:00
toshiba,mmc-wrprotect-disable;
ARM: shmobile: kzm9g-reference: fix device-tree bindings and device names Fix several device-tree bindings, that haven't been updated for newest versions of respective drivers, and device names and pin numbers, left over from non-DT and old pinctrl versions. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-19 17:38:50 +00:00
cap-sd-highspeed;
ARM: shmobile: sh73a0: move SDHI and MMCIF DT nodes to sh73a0.dtsi To avoid having to repeat common DT node properties in all .dts files move them to SoC's .dtsi file, setting their status to "disabled." Individual boards will pick up devices, that they want to use and change their DT node status to enabled. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-19 12:47:43 +00:00
status = "disabled";
};
ARM: shmobile: sh73a0: Add pin control device to device tree Add a pfc node to the sh73a0 device tree and remove manual pinmux initialization from the corresponding board files. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-11-20 13:02:54 +00:00
pfc: pfc@e6050000 {
compatible = "renesas,pfc-sh73a0";
reg = <0xe6050000 0x8000>,
<0xe605801c 0x1c>;
gpio-controller;
#gpio-cells = <2>;
ARM: shmobile: sh73a0: Specify PFC interrupts in DT Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-11 03:26:29 +00:00
interrupts-extended =
<&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>,
<&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>,
<&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>,
<&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>,
<&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>,
<&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>,
<&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>,
<&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
ARM: shmobile: sh73a0: Add pin control device to device tree Add a pfc node to the sh73a0 device tree and remove manual pinmux initialization from the corresponding board files. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-11-20 13:02:54 +00:00
};
ARM: shmobile: sh73a0: add FSI support via DTSI Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-05 01:32:54 +00:00
sh_fsi2: sound@ec230000 {
#sound-dai-cells = <1>;
compatible = "renesas,sh_fsi2";
reg = <0xec230000 0x400>;
interrupt-parent = <&gic>;
interrupts = <0 146 0x4>;
status = "disabled";
};
ARM: mach-shmobile: sh73a0: Allow initialisation of GIC by DT This allows the GIC interrupt controller of the sh73a0 SoC to be initialised using a flattened device tree blob. It does not allow the INTC interrupt controller which is also present on the sh73a0 SoC to be enabled via device tree. Nor does it handle sharing of interrupts between the GIC and INTC interrupt controllers. This limits the usefulness of this code to applications which only wish to access devices which use interrupts that can be handled by the GIC interrupt controller. Other applications should, for now, continue using non-device tree initialisation of the sh72a0 interrupt controllers. Includes update to use irqchip_init() by Thierry Reding Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-11-21 12:12:43 +00:00
};
Reference in New Issue Copy Permalink