linux/drivers/video/Makefile

142 lines
5.9 KiB
Makefile
Raw Normal View History

# Makefile for the Linux video drivers.
# 5 Aug 1999, James Simmons, <mailto:jsimmons@users.sf.net>
# Rewritten to use lists instead of if-statements.
# Each configuration option enables a list of files.
obj-$(CONFIG_VGASTATE) += vgastate.o
obj-y += fb_notify.o
obj-$(CONFIG_FB) += fb.o
2005-09-09 20:09:58 +00:00
fb-y := fbmem.o fbmon.o fbcmap.o fbsysfs.o \
modedb.o fbcvt.o
fb-objs := $(fb-y)
obj-$(CONFIG_VT) += console/
obj-$(CONFIG_LOGO) += logo/
obj-y += backlight/ display/
obj-$(CONFIG_FB_CFB_FILLRECT) += cfbfillrect.o
obj-$(CONFIG_FB_CFB_COPYAREA) += cfbcopyarea.o
obj-$(CONFIG_FB_CFB_IMAGEBLIT) += cfbimgblt.o
obj-$(CONFIG_FB_SYS_FILLRECT) += sysfillrect.o
obj-$(CONFIG_FB_SYS_COPYAREA) += syscopyarea.o
obj-$(CONFIG_FB_SYS_IMAGEBLIT) += sysimgblt.o
obj-$(CONFIG_FB_SYS_FOPS) += fb_sys_fops.o
obj-$(CONFIG_FB_SVGALIB) += svgalib.o
obj-$(CONFIG_FB_MACMODES) += macmodes.o
obj-$(CONFIG_FB_DDC) += fb_ddc.o
obj-$(CONFIG_FB_DEFERRED_IO) += fb_defio.o
# Hardware specific drivers go first
obj-$(CONFIG_FB_AMIGA) += amifb.o c2p_planar.o
obj-$(CONFIG_FB_ARC) += arcfb.o
obj-$(CONFIG_FB_CLPS711X) += clps711xfb.o
obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o
obj-$(CONFIG_FB_PM2) += pm2fb.o
obj-$(CONFIG_FB_PM3) += pm3fb.o
obj-$(CONFIG_FB_MATROX) += matrox/
obj-$(CONFIG_FB_RIVA) += riva/
obj-$(CONFIG_FB_NVIDIA) += nvidia/
obj-$(CONFIG_FB_ATY) += aty/ macmodes.o
obj-$(CONFIG_FB_ATY128) += aty/ macmodes.o
obj-$(CONFIG_FB_RADEON) += aty/
obj-$(CONFIG_FB_SIS) += sis/
obj-$(CONFIG_FB_VIA) += via/
obj-$(CONFIG_FB_KYRO) += kyro/
obj-$(CONFIG_FB_SAVAGE) += savage/
obj-$(CONFIG_FB_GEODE) += geode/
obj-$(CONFIG_FB_MBX) += mbx/
obj-$(CONFIG_FB_NEOMAGIC) += neofb.o
obj-$(CONFIG_FB_3DFX) += tdfxfb.o
obj-$(CONFIG_FB_CONTROL) += controlfb.o
obj-$(CONFIG_FB_PLATINUM) += platinumfb.o
obj-$(CONFIG_FB_VALKYRIE) += valkyriefb.o
obj-$(CONFIG_FB_CT65550) += chipsfb.o
obj-$(CONFIG_FB_IMSTT) += imsttfb.o
obj-$(CONFIG_FB_FM2) += fm2fb.o
obj-$(CONFIG_FB_VT8623) += vt8623fb.o
[PATCH] framebuffer: new driver for cyberblade/i1 graphics core This is a framebuffer driver for the Cyberblade/i1 graphics core. Currently tridenfb claims to support the cyberblade/i1 graphics core. This is of very limited truth. Even vesafb is faster and provides more working modes and a much better quality of the video signal. There is a great number of bugs in tridentfb ... but most often it is impossible to decide if these bugs are real bugs or if fixing them for the cyberblade/i1 core would break support for one of the other supported chips. Tridentfb seems to be unmaintained,and documentation for most of the supported chips is not available. So "fixing" cyberblade/i1 support inside of tridentfb was not an option, it would have caused numerous if(CYBERBLADEi1) else ... cases and would have rendered the code to be almost unmaintainable. A first version of this driver was published on 2005-07-31. A fix for a bug reported by Jochen Hein was integrated as well as some changes requested by Antonino A. Daplas. A message has been added to tridentfb to inform current users of tridentfb to switch to cyblafb if the cyberblade/i1 graphics core is detected. This patch is one logical change, but because of the included documentation it is bigger than 70kb. Therefore it is not sent to lkml and linux-fbdev-devel, Signed-off-by: Knut Petersen <Knut_Petersen@t-online.de> Cc: Muli Ben-Yehuda <mulix@mulix.org> Acked-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 20:04:56 +00:00
obj-$(CONFIG_FB_CYBLA) += cyblafb.o
obj-$(CONFIG_FB_TRIDENT) += tridentfb.o
obj-$(CONFIG_FB_LE80578) += vermilion/
obj-$(CONFIG_FB_S3) += s3fb.o
obj-$(CONFIG_FB_ARK) += arkfb.o
obj-$(CONFIG_FB_STI) += stifb.o
obj-$(CONFIG_FB_FFB) += ffb.o sbuslib.o
obj-$(CONFIG_FB_CG6) += cg6.o sbuslib.o
obj-$(CONFIG_FB_CG3) += cg3.o sbuslib.o
obj-$(CONFIG_FB_BW2) += bw2.o sbuslib.o
obj-$(CONFIG_FB_CG14) += cg14.o sbuslib.o
obj-$(CONFIG_FB_P9100) += p9100.o sbuslib.o
obj-$(CONFIG_FB_TCX) += tcx.o sbuslib.o
obj-$(CONFIG_FB_LEO) += leo.o sbuslib.o
obj-$(CONFIG_FB_SGIVW) += sgivwfb.o
obj-$(CONFIG_FB_ACORN) += acornfb.o
obj-$(CONFIG_FB_ATARI) += atafb.o c2p_iplan2.o atafb_mfb.o \
atafb_iplan2p2.o atafb_iplan2p4.o atafb_iplan2p8.o
obj-$(CONFIG_FB_MAC) += macfb.o
obj-$(CONFIG_FB_HECUBA) += hecubafb.o
obj-$(CONFIG_FB_HGA) += hgafb.o
obj-$(CONFIG_FB_XVR500) += sunxvr500.o
obj-$(CONFIG_FB_XVR2500) += sunxvr2500.o
obj-$(CONFIG_FB_IGA) += igafb.o
obj-$(CONFIG_FB_APOLLO) += dnfb.o
obj-$(CONFIG_FB_Q40) += q40fb.o
obj-$(CONFIG_FB_TGA) += tgafb.o
obj-$(CONFIG_FB_HP300) += hpfb.o
obj-$(CONFIG_FB_G364) += g364fb.o
obj-$(CONFIG_FB_SA1100) += sa1100fb.o
obj-$(CONFIG_FB_HIT) += hitfb.o
obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o
obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o
obj-$(CONFIG_FB_PVR2) += pvr2fb.o
obj-$(CONFIG_FB_VOODOO1) += sstfb.o
obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o
obj-$(CONFIG_FB_68328) += 68328fb.o
obj-$(CONFIG_FB_GBE) += gbefb.o
obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o
obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o
obj-$(CONFIG_FB_PXA) += pxafb.o
obj-$(CONFIG_FB_W100) += w100fb.o
obj-$(CONFIG_FB_TMIO) += tmiofb.o
obj-$(CONFIG_FB_AU1100) += au1100fb.o
obj-$(CONFIG_FB_AU1200) += au1200fb.o
obj-$(CONFIG_FB_PMAG_AA) += pmag-aa-fb.o
obj-$(CONFIG_FB_PMAG_BA) += pmag-ba-fb.o
obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o
obj-$(CONFIG_FB_MAXINE) += maxinefb.o
obj-$(CONFIG_FB_METRONOME) += metronomefb.o
obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o
obj-$(CONFIG_FB_SH7760) += sh7760fb.o
obj-$(CONFIG_FB_IMX) += imxfb.o
obj-$(CONFIG_FB_S3C2410) += s3c2410fb.o
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
obj-$(CONFIG_FB_FSL_DIU) += fsl-diu-fb.o
obj-$(CONFIG_FB_COBALT) += cobalt_lcdfb.o
obj-$(CONFIG_FB_PNX4008_DUM) += pnx4008/
obj-$(CONFIG_FB_PNX4008_DUM_RGB) += pnx4008/
obj-$(CONFIG_FB_IBM_GXT4500) += gxt4500.o
obj-$(CONFIG_FB_PS3) += ps3fb.o
obj-$(CONFIG_FB_SM501) += sm501fb.o
obj-$(CONFIG_FB_XILINX) += xilinxfb.o
obj-$(CONFIG_FB_SH_MOBILE_LCDC) += sh_mobile_lcdcfb.o
obj-$(CONFIG_FB_OMAP) += omap/
obj-$(CONFIG_XEN_FBDEV_FRONTEND) += xen-fbfront.o
obj-$(CONFIG_FB_CARMINE) += carminefb.o
obj-$(CONFIG_FB_MB862XX) += mb862xx/
# Platform or fallback drivers go here
uvesafb: the driver core uvesafb is an enhanced version of vesafb. It uses a userspace helper (v86d) to execute calls to the x86 Video BIOS functions. The driver is not limited to any specific arch and whether it works on a given arch or not depends on that arch being supported by the userspace daemon. It has been tested on x86_32 and x86_64. A single BIOS call is represented by an instance of the uvesafb_ktask structure. This structure contains a buffer, a completion struct and a uvesafb_task substructure, containing the values of the x86 registers, a flags field and a field indicating the length of the buffer. Whenever a BIOS call is made in the driver, uvesafb_exec() builds a message using the uvesafb_task substructure and the contents of the buffer. This message is then assigned a random ack number and sent to the userspace daemon using the connector interface. The message's sequence number is used as an index for the uvfb_tasks array, which provides a mapping from the messages coming from userspace to the in-kernel uvesafb_ktask structs. The userspace daemon performs the requested operation and sends a reply in the form of a uvesafb_task struct and, optionally, a buffer. The seq and ack numbers in the reply should be exactly the same as those in the request. Each message from userspace is processed by uvesafb_cn_callback() and after passing a few sanity checks leads to the completion of a BIOS call request. Signed-off-by: Michal Januszewski <spock@gentoo.org> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Paulo Marques <pmarques@grupopie.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 08:28:26 +00:00
obj-$(CONFIG_FB_UVESA) += uvesafb.o
obj-$(CONFIG_FB_VESA) += vesafb.o
obj-$(CONFIG_FB_EFI) += efifb.o
obj-$(CONFIG_FB_VGA16) += vga16fb.o
obj-$(CONFIG_FB_OF) += offb.o
obj-$(CONFIG_FB_BF54X_LQ043) += bf54x-lq043fb.o
obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin-t350mcqb-fb.o
obj-$(CONFIG_FB_MX3) += mx3fb.o
# the test framebuffer is last
obj-$(CONFIG_FB_VIRTUAL) += vfb.o
#video output switch sysfs driver
obj-$(CONFIG_VIDEO_OUTPUT_CONTROL) += output.o