linux/drivers/of/platform.c

519 lines
14 KiB
C
Raw Normal View History

/*
* Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
* <benh@kernel.crashing.org>
* and Arnd Bergmann, IBM Corp.
* Merged from powerpc/kernel/of_platform.c and
* sparc{,64}/kernel/of_device.c by Stephen Rothwell
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
*/
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/amba/bus.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
const struct of_device_id of_default_bus_match_table[] = {
{ .compatible = "simple-bus", },
#ifdef CONFIG_ARM_AMBA
{ .compatible = "arm,amba-bus", },
#endif /* CONFIG_ARM_AMBA */
{} /* Empty terminated list */
};
static int of_dev_node_match(struct device *dev, void *data)
{
return dev->of_node == data;
}
/**
* of_find_device_by_node - Find the platform_device associated with a node
* @np: Pointer to device tree node
*
* Returns platform_device pointer, or NULL if not found
*/
struct platform_device *of_find_device_by_node(struct device_node *np)
{
struct device *dev;
dev = bus_find_device(&platform_bus_type, NULL, np, of_dev_node_match);
return dev ? to_platform_device(dev) : NULL;
}
EXPORT_SYMBOL(of_find_device_by_node);
#ifdef CONFIG_OF_ADDRESS
/*
* The following routines scan a subtree and registers a device for
* each applicable node.
*
* Note: sparc doesn't use these routines because it has a different
* mechanism for creating devices from device tree nodes.
*/
/**
* of_device_make_bus_id - Use the device node data to assign a unique name
* @dev: pointer to device structure that is linked to a device tree node
*
* This routine will first try using the translated bus address to
* derive a unique name. If it cannot, then it will prepend names from
* parent nodes until a unique name can be derived.
*/
void of_device_make_bus_id(struct device *dev)
{
struct device_node *node = dev->of_node;
const __be32 *reg;
u64 addr;
/* Construct the name, using parent nodes if necessary to ensure uniqueness */
while (node->parent) {
/*
* If the address can be translated, then that is as much
* uniqueness as we need. Make it the first component and return
*/
reg = of_get_property(node, "reg", NULL);
if (reg && (addr = of_translate_address(node, reg)) != OF_BAD_ADDR) {
dev_set_name(dev, dev_name(dev) ? "%llx.%s:%s" : "%llx.%s",
(unsigned long long)addr, node->name,
dev_name(dev));
return;
}
/* format arguments only used if dev_name() resolves to NULL */
dev_set_name(dev, dev_name(dev) ? "%s:%s" : "%s",
strrchr(node->full_name, '/') + 1, dev_name(dev));
node = node->parent;
}
}
/**
* of_device_alloc - Allocate and initialize an of_device
* @np: device node to assign to device
* @bus_id: Name to assign to the device. May be null to use default name.
* @parent: Parent device.
*/
struct platform_device *of_device_alloc(struct device_node *np,
const char *bus_id,
struct device *parent)
{
struct platform_device *dev;
int rc, i, num_reg = 0, num_irq;
struct resource *res, temp_res;
dev = platform_device_alloc("", -1);
if (!dev)
return NULL;
/* count the io and irq resources */
while (of_address_to_resource(np, num_reg, &temp_res) == 0)
num_reg++;
num_irq = of_irq_count(np);
/* Populate the resource table */
if (num_irq || num_reg) {
res = kzalloc(sizeof(*res) * (num_irq + num_reg), GFP_KERNEL);
if (!res) {
platform_device_put(dev);
return NULL;
}
dev->num_resources = num_reg + num_irq;
dev->resource = res;
for (i = 0; i < num_reg; i++, res++) {
rc = of_address_to_resource(np, i, res);
WARN_ON(rc);
}
of/irq: do irq resolution in platform_get_irq Currently we get the following kind of errors if we try to use interrupt phandles to irqchips that have not yet initialized: irq: no irq domain found for /ocp/pinmux@48002030 ! ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at drivers/of/platform.c:171 of_device_alloc+0x144/0x184() Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.12.0-00038-g42a9708 #1012 (show_stack+0x14/0x1c) (dump_stack+0x6c/0xa0) (warn_slowpath_common+0x64/0x84) (warn_slowpath_null+0x1c/0x24) (of_device_alloc+0x144/0x184) (of_platform_device_create_pdata+0x44/0x9c) (of_platform_bus_create+0xd0/0x170) (of_platform_bus_create+0x12c/0x170) (of_platform_populate+0x60/0x98) This is because we're wrongly trying to populate resources that are not yet available. It's perfectly valid to create irqchips dynamically, so let's fix up the issue by resolving the interrupt resources when platform_get_irq is called. And then we also need to accept the fact that some irqdomains do not exist that early on, and only get initialized later on. So we can make the current WARN_ON into just into a pr_debug(). We still attempt to populate irq resources when we create the devices. This allows current drivers which don't use platform_get_irq to continue to function. Once all drivers are fixed, this code can be removed. Suggested-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Tony Lindgren <tony@atomide.com> Cc: stable@vger.kernel.org # v3.10+ Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-04-23 22:57:41 +00:00
if (of_irq_to_resource_table(np, res, num_irq) != num_irq)
pr_debug("not all legacy IRQ resources mapped for %s\n",
np->name);
}
dev->dev.of_node = of_node_get(np);
#if defined(CONFIG_MICROBLAZE)
dev->dev.dma_mask = &dev->archdata.dma_mask;
#endif
dev->dev.parent = parent;
if (bus_id)
dev_set_name(&dev->dev, "%s", bus_id);
else
of_device_make_bus_id(&dev->dev);
return dev;
}
EXPORT_SYMBOL(of_device_alloc);
/**
* of_platform_device_create_pdata - Alloc, initialize and register an of_device
* @np: pointer to node to create device for
* @bus_id: name to assign device
* @platform_data: pointer to populate platform_data pointer with
* @parent: Linux device model parent device.
*
* Returns pointer to created platform device, or NULL if a device was not
* registered. Unavailable devices will not get registered.
*/
static struct platform_device *of_platform_device_create_pdata(
struct device_node *np,
const char *bus_id,
void *platform_data,
struct device *parent)
{
struct platform_device *dev;
if (!of_device_is_available(np) ||
of_node_test_and_set_flag(np, OF_POPULATED))
return NULL;
dev = of_device_alloc(np, bus_id, parent);
if (!dev)
goto err_clear_flag;
#if defined(CONFIG_MICROBLAZE)
dev->archdata.dma_mask = 0xffffffffUL;
#endif
dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
if (!dev->dev.dma_mask)
dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
dev->dev.bus = &platform_bus_type;
dev->dev.platform_data = platform_data;
/* We do not fill the DMA ops for platform devices by default.
* This is currently the responsibility of the platform code
* to do such, possibly using a device notifier
*/
if (of_device_add(dev) != 0) {
platform_device_put(dev);
goto err_clear_flag;
}
return dev;
err_clear_flag:
of_node_clear_flag(np, OF_POPULATED);
return NULL;
}
/**
* of_platform_device_create - Alloc, initialize and register an of_device
* @np: pointer to node to create device for
* @bus_id: name to assign device
* @parent: Linux device model parent device.
*
* Returns pointer to created platform device, or NULL if a device was not
* registered. Unavailable devices will not get registered.
*/
struct platform_device *of_platform_device_create(struct device_node *np,
const char *bus_id,
struct device *parent)
{
return of_platform_device_create_pdata(np, bus_id, NULL, parent);
}
EXPORT_SYMBOL(of_platform_device_create);
#ifdef CONFIG_ARM_AMBA
static struct amba_device *of_amba_device_create(struct device_node *node,
const char *bus_id,
void *platform_data,
struct device *parent)
{
struct amba_device *dev;
const void *prop;
int i, ret;
pr_debug("Creating amba device %s\n", node->full_name);
if (!of_device_is_available(node) ||
of_node_test_and_set_flag(node, OF_POPULATED))
return NULL;
dev = amba_device_alloc(NULL, 0, 0);
if (!dev) {
pr_err("%s(): amba_device_alloc() failed for %s\n",
__func__, node->full_name);
goto err_clear_flag;
}
/* setup generic device info */
dev->dev.coherent_dma_mask = ~0;
dev->dev.of_node = of_node_get(node);
dev->dev.parent = parent;
dev->dev.platform_data = platform_data;
if (bus_id)
dev_set_name(&dev->dev, "%s", bus_id);
else
of_device_make_bus_id(&dev->dev);
/* Allow the HW Peripheral ID to be overridden */
prop = of_get_property(node, "arm,primecell-periphid", NULL);
if (prop)
dev->periphid = of_read_ulong(prop, 1);
/* Decode the IRQs and address ranges */
for (i = 0; i < AMBA_NR_IRQS; i++)
dev->irq[i] = irq_of_parse_and_map(node, i);
ret = of_address_to_resource(node, 0, &dev->res);
if (ret) {
pr_err("%s(): of_address_to_resource() failed (%d) for %s\n",
__func__, ret, node->full_name);
goto err_free;
}
ret = amba_device_add(dev, &iomem_resource);
if (ret) {
pr_err("%s(): amba_device_add() failed (%d) for %s\n",
__func__, ret, node->full_name);
goto err_free;
}
return dev;
err_free:
amba_device_put(dev);
err_clear_flag:
of_node_clear_flag(node, OF_POPULATED);
return NULL;
}
#else /* CONFIG_ARM_AMBA */
static struct amba_device *of_amba_device_create(struct device_node *node,
const char *bus_id,
void *platform_data,
struct device *parent)
{
return NULL;
}
#endif /* CONFIG_ARM_AMBA */
/**
* of_devname_lookup() - Given a device node, lookup the preferred Linux name
*/
static const struct of_dev_auxdata *of_dev_lookup(const struct of_dev_auxdata *lookup,
struct device_node *np)
{
struct resource res;
if (!lookup)
return NULL;
for(; lookup->compatible != NULL; lookup++) {
if (!of_device_is_compatible(np, lookup->compatible))
continue;
if (!of_address_to_resource(np, 0, &res))
if (res.start != lookup->phys_addr)
continue;
pr_debug("%s: devname=%s\n", np->full_name, lookup->name);
return lookup;
}
return NULL;
}
/**
* of_platform_bus_create() - Create a device for a node and its children.
* @bus: device node of the bus to instantiate
* @matches: match table for bus nodes
* @lookup: auxdata table for matching id and platform_data with device nodes
* @parent: parent for new device, or NULL for top level.
* @strict: require compatible property
*
* Creates a platform_device for the provided device_node, and optionally
* recursively create devices for all the child nodes.
*/
static int of_platform_bus_create(struct device_node *bus,
const struct of_device_id *matches,
const struct of_dev_auxdata *lookup,
struct device *parent, bool strict)
{
const struct of_dev_auxdata *auxdata;
struct device_node *child;
struct platform_device *dev;
const char *bus_id = NULL;
void *platform_data = NULL;
int rc = 0;
/* Make sure it has a compatible property */
if (strict && (!of_get_property(bus, "compatible", NULL))) {
pr_debug("%s() - skipping %s, no compatible prop\n",
__func__, bus->full_name);
return 0;
}
auxdata = of_dev_lookup(lookup, bus);
if (auxdata) {
bus_id = auxdata->name;
platform_data = auxdata->platform_data;
}
if (of_device_is_compatible(bus, "arm,primecell")) {
/*
* Don't return an error here to keep compatibility with older
* device tree files.
*/
of_amba_device_create(bus, bus_id, platform_data, parent);
return 0;
}
dev = of_platform_device_create_pdata(bus, bus_id, platform_data, parent);
if (!dev || !of_match_node(matches, bus))
return 0;
for_each_child_of_node(bus, child) {
pr_debug(" create child: %s\n", child->full_name);
rc = of_platform_bus_create(child, matches, lookup, &dev->dev, strict);
if (rc) {
of_node_put(child);
break;
}
}
return rc;
}
/**
* of_platform_bus_probe() - Probe the device-tree for platform buses
* @root: parent of the first level to probe or NULL for the root of the tree
* @matches: match table for bus nodes
* @parent: parent to hook devices from, NULL for toplevel
*
* Note that children of the provided root are not instantiated as devices
* unless the specified root itself matches the bus list and is not NULL.
*/
int of_platform_bus_probe(struct device_node *root,
const struct of_device_id *matches,
struct device *parent)
{
struct device_node *child;
int rc = 0;
root = root ? of_node_get(root) : of_find_node_by_path("/");
if (!root)
return -EINVAL;
pr_debug("of_platform_bus_probe()\n");
pr_debug(" starting at: %s\n", root->full_name);
/* Do a self check of bus type, if there's a match, create children */
if (of_match_node(matches, root)) {
rc = of_platform_bus_create(root, matches, NULL, parent, false);
} else for_each_child_of_node(root, child) {
if (!of_match_node(matches, child))
continue;
rc = of_platform_bus_create(child, matches, NULL, parent, false);
if (rc)
break;
}
of_node_put(root);
return rc;
}
EXPORT_SYMBOL(of_platform_bus_probe);
/**
* of_platform_populate() - Populate platform_devices from device tree data
* @root: parent of the first level to probe or NULL for the root of the tree
* @matches: match table, NULL to use the default
* @lookup: auxdata table for matching id and platform_data with device nodes
* @parent: parent to hook devices from, NULL for toplevel
*
* Similar to of_platform_bus_probe(), this function walks the device tree
* and creates devices from nodes. It differs in that it follows the modern
* convention of requiring all device nodes to have a 'compatible' property,
* and it is suitable for creating devices which are children of the root
* node (of_platform_bus_probe will only create children of the root which
* are selected by the @matches argument).
*
* New board support should be using this function instead of
* of_platform_bus_probe().
*
* Returns 0 on success, < 0 on failure.
*/
int of_platform_populate(struct device_node *root,
const struct of_device_id *matches,
const struct of_dev_auxdata *lookup,
struct device *parent)
{
struct device_node *child;
int rc = 0;
root = root ? of_node_get(root) : of_find_node_by_path("/");
if (!root)
return -EINVAL;
for_each_child_of_node(root, child) {
rc = of_platform_bus_create(child, matches, lookup, parent, true);
if (rc)
break;
}
of_node_put(root);
return rc;
}
EXPORT_SYMBOL_GPL(of_platform_populate);
static int of_platform_device_destroy(struct device *dev, void *data)
{
bool *children_left = data;
/* Do not touch devices not populated from the device tree */
if (!dev->of_node || !of_node_check_flag(dev->of_node, OF_POPULATED)) {
*children_left = true;
return 0;
}
/* Recurse, but don't touch this device if it has any children left */
if (of_platform_depopulate(dev) != 0) {
*children_left = true;
return 0;
}
if (dev->bus == &platform_bus_type)
platform_device_unregister(to_platform_device(dev));
#ifdef CONFIG_ARM_AMBA
else if (dev->bus == &amba_bustype)
amba_device_unregister(to_amba_device(dev));
#endif
else {
*children_left = true;
return 0;
}
of_node_clear_flag(dev->of_node, OF_POPULATED);
return 0;
}
/**
* of_platform_depopulate() - Remove devices populated from device tree
* @parent: device which childred will be removed
*
* Complementary to of_platform_populate(), this function removes children
* of the given device (and, recurrently, their children) that have been
* created from their respective device tree nodes (and only those,
* leaving others - eg. manually created - unharmed).
*
* Returns 0 when all children devices have been removed or
* -EBUSY when some children remained.
*/
int of_platform_depopulate(struct device *parent)
{
bool children_left = false;
device_for_each_child(parent, &children_left,
of_platform_device_destroy);
return children_left ? -EBUSY : 0;
}
EXPORT_SYMBOL_GPL(of_platform_depopulate);
#endif /* CONFIG_OF_ADDRESS */