leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
cce6db80a0
linux/drivers/clk/at91/clk-programmable.c

309 lines
7.3 KiB
C
Raw Normal View History

clk: at91: add PMC programmable clocks This patch adds new at91 programmable clocks implementation using common clk framework. A programmable clock is a clock which can be exported on a given pin to clock external devices. Each programmable clock is given an id (from 0 to 8). The number of available programmable clocks depends on the SoC you're using. Programmable clock driver only implements the clock setting (clock rate and parent setting). It must be chained to a system clock in order to enable/disable the generated clock. The PCKX pins used to output the clock signals must be assigned to the appropriate peripheral (see atmel's datasheets). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-11 09:57:04 +00:00
/*
* Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*/
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/clk/at91_pmc.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/io.h>
#include <linux/wait.h>
#include <linux/sched.h>
#include "pmc.h"
#define PROG_SOURCE_MAX 5
#define PROG_ID_MAX 7
#define PROG_STATUS_MASK(id) (1 << ((id) + 8))
#define PROG_PRES_MASK 0x7
#define PROG_MAX_RM9200_CSS 3
struct clk_programmable_layout {
u8 pres_shift;
u8 css_mask;
u8 have_slck_mck;
};
struct clk_programmable {
struct clk_hw hw;
struct at91_pmc *pmc;
u8 id;
const struct clk_programmable_layout *layout;
};
#define to_clk_programmable(hw) container_of(hw, struct clk_programmable, hw)
static unsigned long clk_programmable_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
clk: at91: fix programmable clk irq handling The PCKRDY bit is not set until the system clock is enabled. This patch moves the management of the ready status in the system clock driver. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-03-11 09:00:34 +00:00
u32 pres;
clk: at91: add PMC programmable clocks This patch adds new at91 programmable clocks implementation using common clk framework. A programmable clock is a clock which can be exported on a given pin to clock external devices. Each programmable clock is given an id (from 0 to 8). The number of available programmable clocks depends on the SoC you're using. Programmable clock driver only implements the clock setting (clock rate and parent setting). It must be chained to a system clock in order to enable/disable the generated clock. The PCKX pins used to output the clock signals must be assigned to the appropriate peripheral (see atmel's datasheets). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-11 09:57:04 +00:00
struct clk_programmable *prog = to_clk_programmable(hw);
struct at91_pmc *pmc = prog->pmc;
const struct clk_programmable_layout *layout = prog->layout;
clk: at91: fix programmable clk irq handling The PCKRDY bit is not set until the system clock is enabled. This patch moves the management of the ready status in the system clock driver. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-03-11 09:00:34 +00:00
pres = (pmc_read(pmc, AT91_PMC_PCKR(prog->id)) >> layout->pres_shift) &
PROG_PRES_MASK;
return parent_rate >> pres;
clk: at91: add PMC programmable clocks This patch adds new at91 programmable clocks implementation using common clk framework. A programmable clock is a clock which can be exported on a given pin to clock external devices. Each programmable clock is given an id (from 0 to 8). The number of available programmable clocks depends on the SoC you're using. Programmable clock driver only implements the clock setting (clock rate and parent setting). It must be chained to a system clock in order to enable/disable the generated clock. The PCKX pins used to output the clock signals must be assigned to the appropriate peripheral (see atmel's datasheets). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-11 09:57:04 +00:00
}
clk: at91: replace prog clk round_rate with determine_rate Implement the determine_rate callback to choose the best parent clk that fulfills the requested rate. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-03-11 09:00:32 +00:00
static long clk_programmable_determine_rate(struct clk_hw *hw,
unsigned long rate,
unsigned long *best_parent_rate,
struct clk **best_parent_clk)
clk: at91: add PMC programmable clocks This patch adds new at91 programmable clocks implementation using common clk framework. A programmable clock is a clock which can be exported on a given pin to clock external devices. Each programmable clock is given an id (from 0 to 8). The number of available programmable clocks depends on the SoC you're using. Programmable clock driver only implements the clock setting (clock rate and parent setting). It must be chained to a system clock in order to enable/disable the generated clock. The PCKX pins used to output the clock signals must be assigned to the appropriate peripheral (see atmel's datasheets). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-11 09:57:04 +00:00
{
clk: at91: replace prog clk round_rate with determine_rate Implement the determine_rate callback to choose the best parent clk that fulfills the requested rate. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-03-11 09:00:32 +00:00
struct clk *parent = NULL;
long best_rate = -EINVAL;
unsigned long parent_rate;
unsigned long tmp_rate;
int shift;
int i;
for (i = 0; i < __clk_get_num_parents(hw->clk); i++) {
parent = clk_get_parent_by_index(hw->clk, i);
if (!parent)
continue;
parent_rate = __clk_get_rate(parent);
for (shift = 0; shift < PROG_PRES_MASK; shift++) {
tmp_rate = parent_rate >> shift;
if (tmp_rate <= rate)
break;
}
clk: at91: add PMC programmable clocks This patch adds new at91 programmable clocks implementation using common clk framework. A programmable clock is a clock which can be exported on a given pin to clock external devices. Each programmable clock is given an id (from 0 to 8). The number of available programmable clocks depends on the SoC you're using. Programmable clock driver only implements the clock setting (clock rate and parent setting). It must be chained to a system clock in order to enable/disable the generated clock. The PCKX pins used to output the clock signals must be assigned to the appropriate peripheral (see atmel's datasheets). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-11 09:57:04 +00:00
clk: at91: replace prog clk round_rate with determine_rate Implement the determine_rate callback to choose the best parent clk that fulfills the requested rate. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-03-11 09:00:32 +00:00
if (tmp_rate > rate)
continue;
clk: at91: add PMC programmable clocks This patch adds new at91 programmable clocks implementation using common clk framework. A programmable clock is a clock which can be exported on a given pin to clock external devices. Each programmable clock is given an id (from 0 to 8). The number of available programmable clocks depends on the SoC you're using. Programmable clock driver only implements the clock setting (clock rate and parent setting). It must be chained to a system clock in order to enable/disable the generated clock. The PCKX pins used to output the clock signals must be assigned to the appropriate peripheral (see atmel's datasheets). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-11 09:57:04 +00:00
clk: at91: replace prog clk round_rate with determine_rate Implement the determine_rate callback to choose the best parent clk that fulfills the requested rate. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-03-11 09:00:32 +00:00
if (best_rate < 0 || (rate - tmp_rate) < (rate - best_rate)) {
best_rate = tmp_rate;
*best_parent_rate = parent_rate;
*best_parent_clk = parent;
clk: at91: add PMC programmable clocks This patch adds new at91 programmable clocks implementation using common clk framework. A programmable clock is a clock which can be exported on a given pin to clock external devices. Each programmable clock is given an id (from 0 to 8). The number of available programmable clocks depends on the SoC you're using. Programmable clock driver only implements the clock setting (clock rate and parent setting). It must be chained to a system clock in order to enable/disable the generated clock. The PCKX pins used to output the clock signals must be assigned to the appropriate peripheral (see atmel's datasheets). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-11 09:57:04 +00:00
}
clk: at91: replace prog clk round_rate with determine_rate Implement the determine_rate callback to choose the best parent clk that fulfills the requested rate. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-03-11 09:00:32 +00:00
if (!best_rate)
clk: at91: add PMC programmable clocks This patch adds new at91 programmable clocks implementation using common clk framework. A programmable clock is a clock which can be exported on a given pin to clock external devices. Each programmable clock is given an id (from 0 to 8). The number of available programmable clocks depends on the SoC you're using. Programmable clock driver only implements the clock setting (clock rate and parent setting). It must be chained to a system clock in order to enable/disable the generated clock. The PCKX pins used to output the clock signals must be assigned to the appropriate peripheral (see atmel's datasheets). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-11 09:57:04 +00:00
break;
}
return best_rate;
}
static int clk_programmable_set_parent(struct clk_hw *hw, u8 index)
{
struct clk_programmable *prog = to_clk_programmable(hw);
const struct clk_programmable_layout *layout = prog->layout;
clk: at91: fix programmable clk irq handling The PCKRDY bit is not set until the system clock is enabled. This patch moves the management of the ready status in the system clock driver. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-03-11 09:00:34 +00:00
struct at91_pmc *pmc = prog->pmc;
u32 tmp = pmc_read(pmc, AT91_PMC_PCKR(prog->id)) & ~layout->css_mask;
if (layout->have_slck_mck)
tmp &= AT91_PMC_CSSMCK_MCK;
clk: at91: add PMC programmable clocks This patch adds new at91 programmable clocks implementation using common clk framework. A programmable clock is a clock which can be exported on a given pin to clock external devices. Each programmable clock is given an id (from 0 to 8). The number of available programmable clocks depends on the SoC you're using. Programmable clock driver only implements the clock setting (clock rate and parent setting). It must be chained to a system clock in order to enable/disable the generated clock. The PCKX pins used to output the clock signals must be assigned to the appropriate peripheral (see atmel's datasheets). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-11 09:57:04 +00:00
if (index > layout->css_mask) {
if (index > PROG_MAX_RM9200_CSS && layout->have_slck_mck) {
clk: at91: fix programmable clk irq handling The PCKRDY bit is not set until the system clock is enabled. This patch moves the management of the ready status in the system clock driver. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-03-11 09:00:34 +00:00
tmp |= AT91_PMC_CSSMCK_MCK;
clk: at91: add PMC programmable clocks This patch adds new at91 programmable clocks implementation using common clk framework. A programmable clock is a clock which can be exported on a given pin to clock external devices. Each programmable clock is given an id (from 0 to 8). The number of available programmable clocks depends on the SoC you're using. Programmable clock driver only implements the clock setting (clock rate and parent setting). It must be chained to a system clock in order to enable/disable the generated clock. The PCKX pins used to output the clock signals must be assigned to the appropriate peripheral (see atmel's datasheets). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-11 09:57:04 +00:00
return 0;
} else {
return -EINVAL;
}
}
clk: at91: fix programmable clk irq handling The PCKRDY bit is not set until the system clock is enabled. This patch moves the management of the ready status in the system clock driver. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-03-11 09:00:34 +00:00
pmc_write(pmc, AT91_PMC_PCKR(prog->id), tmp | index);
clk: at91: add PMC programmable clocks This patch adds new at91 programmable clocks implementation using common clk framework. A programmable clock is a clock which can be exported on a given pin to clock external devices. Each programmable clock is given an id (from 0 to 8). The number of available programmable clocks depends on the SoC you're using. Programmable clock driver only implements the clock setting (clock rate and parent setting). It must be chained to a system clock in order to enable/disable the generated clock. The PCKX pins used to output the clock signals must be assigned to the appropriate peripheral (see atmel's datasheets). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-11 09:57:04 +00:00
return 0;
}
static u8 clk_programmable_get_parent(struct clk_hw *hw)
{
u32 tmp;
u8 ret;
struct clk_programmable *prog = to_clk_programmable(hw);
struct at91_pmc *pmc = prog->pmc;
const struct clk_programmable_layout *layout = prog->layout;
tmp = pmc_read(pmc, AT91_PMC_PCKR(prog->id));
clk: at91: fix programmable clk irq handling The PCKRDY bit is not set until the system clock is enabled. This patch moves the management of the ready status in the system clock driver. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-03-11 09:00:34 +00:00
ret = tmp & layout->css_mask;
if (layout->have_slck_mck && (tmp & AT91_PMC_CSSMCK_MCK) && !ret)
ret = PROG_MAX_RM9200_CSS + 1;
clk: at91: add PMC programmable clocks This patch adds new at91 programmable clocks implementation using common clk framework. A programmable clock is a clock which can be exported on a given pin to clock external devices. Each programmable clock is given an id (from 0 to 8). The number of available programmable clocks depends on the SoC you're using. Programmable clock driver only implements the clock setting (clock rate and parent setting). It must be chained to a system clock in order to enable/disable the generated clock. The PCKX pins used to output the clock signals must be assigned to the appropriate peripheral (see atmel's datasheets). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-11 09:57:04 +00:00
return ret;
}
static int clk_programmable_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct clk_programmable *prog = to_clk_programmable(hw);
clk: at91: fix programmable clk irq handling The PCKRDY bit is not set until the system clock is enabled. This patch moves the management of the ready status in the system clock driver. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-03-11 09:00:34 +00:00
struct at91_pmc *pmc = prog->pmc;
const struct clk_programmable_layout *layout = prog->layout;
clk: at91: add PMC programmable clocks This patch adds new at91 programmable clocks implementation using common clk framework. A programmable clock is a clock which can be exported on a given pin to clock external devices. Each programmable clock is given an id (from 0 to 8). The number of available programmable clocks depends on the SoC you're using. Programmable clock driver only implements the clock setting (clock rate and parent setting). It must be chained to a system clock in order to enable/disable the generated clock. The PCKX pins used to output the clock signals must be assigned to the appropriate peripheral (see atmel's datasheets). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-11 09:57:04 +00:00
unsigned long best_rate = parent_rate;
unsigned long best_diff;
unsigned long new_diff;
unsigned long cur_rate;
int shift = 0;
clk: at91: fix programmable clk irq handling The PCKRDY bit is not set until the system clock is enabled. This patch moves the management of the ready status in the system clock driver. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-03-11 09:00:34 +00:00
u32 tmp = pmc_read(pmc, AT91_PMC_PCKR(prog->id)) &
~(PROG_PRES_MASK << layout->pres_shift);
clk: at91: add PMC programmable clocks This patch adds new at91 programmable clocks implementation using common clk framework. A programmable clock is a clock which can be exported on a given pin to clock external devices. Each programmable clock is given an id (from 0 to 8). The number of available programmable clocks depends on the SoC you're using. Programmable clock driver only implements the clock setting (clock rate and parent setting). It must be chained to a system clock in order to enable/disable the generated clock. The PCKX pins used to output the clock signals must be assigned to the appropriate peripheral (see atmel's datasheets). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-11 09:57:04 +00:00
if (rate > parent_rate)
return parent_rate;
else
best_diff = parent_rate - rate;
if (!best_diff) {
clk: at91: fix programmable clk irq handling The PCKRDY bit is not set until the system clock is enabled. This patch moves the management of the ready status in the system clock driver. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-03-11 09:00:34 +00:00
pmc_write(pmc, AT91_PMC_PCKR(prog->id), tmp | shift);
clk: at91: add PMC programmable clocks This patch adds new at91 programmable clocks implementation using common clk framework. A programmable clock is a clock which can be exported on a given pin to clock external devices. Each programmable clock is given an id (from 0 to 8). The number of available programmable clocks depends on the SoC you're using. Programmable clock driver only implements the clock setting (clock rate and parent setting). It must be chained to a system clock in order to enable/disable the generated clock. The PCKX pins used to output the clock signals must be assigned to the appropriate peripheral (see atmel's datasheets). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-11 09:57:04 +00:00
return 0;
}
for (shift = 1; shift < PROG_PRES_MASK; shift++) {
cur_rate = parent_rate >> shift;
if (cur_rate > rate)
new_diff = cur_rate - rate;
else
new_diff = rate - cur_rate;
if (!new_diff)
break;
if (new_diff < best_diff) {
best_diff = new_diff;
best_rate = cur_rate;
}
if (rate > cur_rate)
break;
}
clk: at91: fix programmable clk irq handling The PCKRDY bit is not set until the system clock is enabled. This patch moves the management of the ready status in the system clock driver. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-03-11 09:00:34 +00:00
pmc_write(pmc, AT91_PMC_PCKR(prog->id),
tmp | (shift << layout->pres_shift));
clk: at91: add PMC programmable clocks This patch adds new at91 programmable clocks implementation using common clk framework. A programmable clock is a clock which can be exported on a given pin to clock external devices. Each programmable clock is given an id (from 0 to 8). The number of available programmable clocks depends on the SoC you're using. Programmable clock driver only implements the clock setting (clock rate and parent setting). It must be chained to a system clock in order to enable/disable the generated clock. The PCKX pins used to output the clock signals must be assigned to the appropriate peripheral (see atmel's datasheets). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-11 09:57:04 +00:00
return 0;
}
static const struct clk_ops programmable_ops = {
.recalc_rate = clk_programmable_recalc_rate,
clk: at91: replace prog clk round_rate with determine_rate Implement the determine_rate callback to choose the best parent clk that fulfills the requested rate. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-03-11 09:00:32 +00:00
.determine_rate = clk_programmable_determine_rate,
clk: at91: add PMC programmable clocks This patch adds new at91 programmable clocks implementation using common clk framework. A programmable clock is a clock which can be exported on a given pin to clock external devices. Each programmable clock is given an id (from 0 to 8). The number of available programmable clocks depends on the SoC you're using. Programmable clock driver only implements the clock setting (clock rate and parent setting). It must be chained to a system clock in order to enable/disable the generated clock. The PCKX pins used to output the clock signals must be assigned to the appropriate peripheral (see atmel's datasheets). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-11 09:57:04 +00:00
.get_parent = clk_programmable_get_parent,
.set_parent = clk_programmable_set_parent,
.set_rate = clk_programmable_set_rate,
};
static struct clk * __init
clk: at91: fix programmable clk irq handling The PCKRDY bit is not set until the system clock is enabled. This patch moves the management of the ready status in the system clock driver. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-03-11 09:00:34 +00:00
at91_clk_register_programmable(struct at91_pmc *pmc,
clk: at91: add PMC programmable clocks This patch adds new at91 programmable clocks implementation using common clk framework. A programmable clock is a clock which can be exported on a given pin to clock external devices. Each programmable clock is given an id (from 0 to 8). The number of available programmable clocks depends on the SoC you're using. Programmable clock driver only implements the clock setting (clock rate and parent setting). It must be chained to a system clock in order to enable/disable the generated clock. The PCKX pins used to output the clock signals must be assigned to the appropriate peripheral (see atmel's datasheets). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-11 09:57:04 +00:00
const char *name, const char **parent_names,
u8 num_parents, u8 id,
const struct clk_programmable_layout *layout)
{
struct clk_programmable *prog;
struct clk *clk = NULL;
struct clk_init_data init;
if (id > PROG_ID_MAX)
return ERR_PTR(-EINVAL);
prog = kzalloc(sizeof(*prog), GFP_KERNEL);
if (!prog)
return ERR_PTR(-ENOMEM);
init.name = name;
init.ops = &programmable_ops;
init.parent_names = parent_names;
init.num_parents = num_parents;
init.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE;
prog->id = id;
prog->layout = layout;
prog->hw.init = &init;
prog->pmc = pmc;
clk = clk_register(NULL, &prog->hw);
if (IS_ERR(clk))
kfree(prog);
return clk;
}
static const struct clk_programmable_layout at91rm9200_programmable_layout = {
.pres_shift = 2,
.css_mask = 0x3,
.have_slck_mck = 0,
};
static const struct clk_programmable_layout at91sam9g45_programmable_layout = {
.pres_shift = 2,
.css_mask = 0x3,
.have_slck_mck = 1,
};
static const struct clk_programmable_layout at91sam9x5_programmable_layout = {
.pres_shift = 4,
.css_mask = 0x7,
.have_slck_mck = 0,
};
static void __init
of_at91_clk_prog_setup(struct device_node *np, struct at91_pmc *pmc,
const struct clk_programmable_layout *layout)
{
int num;
u32 id;
int i;
struct clk *clk;
int num_parents;
const char *parent_names[PROG_SOURCE_MAX];
const char *name;
struct device_node *progclknp;
num_parents = of_count_phandle_with_args(np, "clocks", "#clock-cells");
if (num_parents <= 0 || num_parents > PROG_SOURCE_MAX)
return;
for (i = 0; i < num_parents; ++i) {
parent_names[i] = of_clk_get_parent_name(np, i);
if (!parent_names[i])
return;
}
num = of_get_child_count(np);
if (!num || num > (PROG_ID_MAX + 1))
return;
for_each_child_of_node(np, progclknp) {
if (of_property_read_u32(progclknp, "reg", &id))
continue;
if (of_property_read_string(np, "clock-output-names", &name))
name = progclknp->name;
clk: at91: fix programmable clk irq handling The PCKRDY bit is not set until the system clock is enabled. This patch moves the management of the ready status in the system clock driver. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-03-11 09:00:34 +00:00
clk = at91_clk_register_programmable(pmc, name,
clk: at91: add PMC programmable clocks This patch adds new at91 programmable clocks implementation using common clk framework. A programmable clock is a clock which can be exported on a given pin to clock external devices. Each programmable clock is given an id (from 0 to 8). The number of available programmable clocks depends on the SoC you're using. Programmable clock driver only implements the clock setting (clock rate and parent setting). It must be chained to a system clock in order to enable/disable the generated clock. The PCKX pins used to output the clock signals must be assigned to the appropriate peripheral (see atmel's datasheets). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-11 09:57:04 +00:00
parent_names, num_parents,
id, layout);
if (IS_ERR(clk))
continue;
of_clk_add_provider(progclknp, of_clk_src_simple_get, clk);
}
}
void __init of_at91rm9200_clk_prog_setup(struct device_node *np,
struct at91_pmc *pmc)
{
of_at91_clk_prog_setup(np, pmc, &at91rm9200_programmable_layout);
}
void __init of_at91sam9g45_clk_prog_setup(struct device_node *np,
struct at91_pmc *pmc)
{
of_at91_clk_prog_setup(np, pmc, &at91sam9g45_programmable_layout);
}
void __init of_at91sam9x5_clk_prog_setup(struct device_node *np,
struct at91_pmc *pmc)
{
of_at91_clk_prog_setup(np, pmc, &at91sam9x5_programmable_layout);
}
Reference in New Issue Copy Permalink