linux/drivers/parport/parport_serial.c

720 lines
20 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* Support for common PCI multi-I/O cards (which is most of them)
*
* Copyright (C) 2001 Tim Waugh <twaugh@redhat.com>
*
* Multi-function PCI cards are supposed to present separate logical
* devices on the bus. A common thing to do seems to be to just use
* one logical device with lots of base address registers for both
* parallel ports and serial ports. This driver is for dealing with
* that.
*/
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/parport.h>
#include <linux/parport_pc.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/8250_pci.h>
enum parport_pc_pci_cards {
titan_110l = 0,
titan_210l,
netmos_9xx5_combo,
netmos_9855,
parport: netmos 9845 & 9855 1P4S fixes netmos serial/parallel adapters come in different flavour differing only by the number of parallel and serial ports, which are encoded in the subdevice ID. Last fix of Christian Pellegrin for 9855 2P2S broke support for 9855 1P4S, and works only by side-effect for the first parallel port of a 2P2S, as this first parallel port is found by reading the second addr entry of (struct parport_pc_pci) cards[netmos_9855], which is not initialized, and hence has value 0, which happens to be the BAR of the first parallel port. netmos_9xx5_combo entry in (struct parport_pc_pci) cards[], which is used for a 9845 1P4S must also be fixed for the parallel port support when there are 4 serial ports because this entry currently gives 2 as BAR index for the parallel port. Actually, in this case, BAR 2 is the 3rd serial port while the parallel port is at BAR 4. I fixed 9845 1P4S and 9855 1P4S support, while preserving 9855 2P2S support, - by creating a netmos_9855_2p entry and using it for 9855 boards with 2 parallel ports : 9855 2P2S and 9855 2P0S boards, - and by allowing netmos_parallel_init to change not only the number of parallel ports (0 or 1), but making it also change the BAR index of the parallel port when the serial ports are before the parallel port. PS: the netmos_9855_2p entry in (struct pciserial_board) pci_parport_serial_boards[] is needed because netmos_parallel_init has no clean way to replace FL_BASE2 by FL_BASE4 in the description of the serial ports in function of the number of parallel ports on the card. Tested with 9845 1P4S, 9855 1P4S and 9855 2P2S boards. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Tested-by: Christian Pellegrin <chripell@fsfe.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 23:58:53 +00:00
netmos_9855_2p,
netmos_9900,
netmos_9900_2p,
netmos_99xx_1p,
avlab_1s1p,
avlab_1s2p,
avlab_2s1p,
siig_1s1p_10x,
siig_2s1p_10x,
siig_2p1s_20x,
siig_1s1p_20x,
siig_2s1p_20x,
timedia_4078a,
timedia_4079h,
timedia_4085h,
timedia_4088a,
timedia_4089a,
timedia_4095a,
timedia_4096a,
timedia_4078u,
timedia_4079a,
timedia_4085u,
timedia_4079r,
timedia_4079s,
timedia_4079d,
timedia_4079e,
timedia_4079f,
timedia_9079a,
timedia_9079b,
timedia_9079c,
wch_ch353_1s1p,
wch_ch353_2s1p,
wch_ch382_0s1p,
wch_ch382_2s1p,
brainboxes_5s1p,
sunix_4008a,
sunix_5069a,
sunix_5079a,
sunix_5099a,
};
/* each element directly indexed from enum list, above */
struct parport_pc_pci {
int numports;
struct { /* BAR (base address registers) numbers in the config
space header */
int lo;
int hi; /* -1 if not there, >6 for offset-method (max
BAR is 6) */
} addr[4];
/* If set, this is called immediately after pci_enable_device.
* If it returns non-zero, no probing will take place and the
* ports will not be used. */
int (*preinit_hook) (struct pci_dev *pdev, struct parport_pc_pci *card,
int autoirq, int autodma);
/* If set, this is called after probing for ports. If 'failed'
* is non-zero we couldn't use any of the ports. */
void (*postinit_hook) (struct pci_dev *pdev,
struct parport_pc_pci *card, int failed);
};
static int netmos_parallel_init(struct pci_dev *dev, struct parport_pc_pci *par,
int autoirq, int autodma)
{
/* the rule described below doesn't hold for this device */
if (dev->device == PCI_DEVICE_ID_NETMOS_9835 &&
dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
dev->subsystem_device == 0x0299)
return -ENODEV;
if (dev->device == PCI_DEVICE_ID_NETMOS_9912) {
par->numports = 1;
} else {
/*
* Netmos uses the subdevice ID to indicate the number of parallel
* and serial ports. The form is 0x00PS, where <P> is the number of
* parallel ports and <S> is the number of serial ports.
*/
par->numports = (dev->subsystem_device & 0xf0) >> 4;
if (par->numports > ARRAY_SIZE(par->addr))
par->numports = ARRAY_SIZE(par->addr);
}
return 0;
}
static struct parport_pc_pci cards[] = {
/* titan_110l */ { 1, { { 3, -1 }, } },
/* titan_210l */ { 1, { { 3, -1 }, } },
/* netmos_9xx5_combo */ { 1, { { 2, -1 }, }, netmos_parallel_init },
parport: netmos 9845 & 9855 1P4S fixes netmos serial/parallel adapters come in different flavour differing only by the number of parallel and serial ports, which are encoded in the subdevice ID. Last fix of Christian Pellegrin for 9855 2P2S broke support for 9855 1P4S, and works only by side-effect for the first parallel port of a 2P2S, as this first parallel port is found by reading the second addr entry of (struct parport_pc_pci) cards[netmos_9855], which is not initialized, and hence has value 0, which happens to be the BAR of the first parallel port. netmos_9xx5_combo entry in (struct parport_pc_pci) cards[], which is used for a 9845 1P4S must also be fixed for the parallel port support when there are 4 serial ports because this entry currently gives 2 as BAR index for the parallel port. Actually, in this case, BAR 2 is the 3rd serial port while the parallel port is at BAR 4. I fixed 9845 1P4S and 9855 1P4S support, while preserving 9855 2P2S support, - by creating a netmos_9855_2p entry and using it for 9855 boards with 2 parallel ports : 9855 2P2S and 9855 2P0S boards, - and by allowing netmos_parallel_init to change not only the number of parallel ports (0 or 1), but making it also change the BAR index of the parallel port when the serial ports are before the parallel port. PS: the netmos_9855_2p entry in (struct pciserial_board) pci_parport_serial_boards[] is needed because netmos_parallel_init has no clean way to replace FL_BASE2 by FL_BASE4 in the description of the serial ports in function of the number of parallel ports on the card. Tested with 9845 1P4S, 9855 1P4S and 9855 2P2S boards. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Tested-by: Christian Pellegrin <chripell@fsfe.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 23:58:53 +00:00
/* netmos_9855 */ { 1, { { 0, -1 }, }, netmos_parallel_init },
/* netmos_9855_2p */ { 2, { { 0, -1 }, { 2, -1 }, } },
/* netmos_9900 */ {1, { { 3, 4 }, }, netmos_parallel_init },
/* netmos_9900_2p */ {2, { { 0, 1 }, { 3, 4 }, } },
/* netmos_99xx_1p */ {1, { { 0, 1 }, } },
/* avlab_1s1p */ { 1, { { 1, 2}, } },
/* avlab_1s2p */ { 2, { { 1, 2}, { 3, 4 },} },
/* avlab_2s1p */ { 1, { { 2, 3}, } },
/* siig_1s1p_10x */ { 1, { { 3, 4 }, } },
/* siig_2s1p_10x */ { 1, { { 4, 5 }, } },
/* siig_2p1s_20x */ { 2, { { 1, 2 }, { 3, 4 }, } },
/* siig_1s1p_20x */ { 1, { { 1, 2 }, } },
/* siig_2s1p_20x */ { 1, { { 2, 3 }, } },
/* timedia_4078a */ { 1, { { 2, -1 }, } },
/* timedia_4079h */ { 1, { { 2, 3 }, } },
/* timedia_4085h */ { 2, { { 2, -1 }, { 4, -1 }, } },
/* timedia_4088a */ { 2, { { 2, 3 }, { 4, 5 }, } },
/* timedia_4089a */ { 2, { { 2, 3 }, { 4, 5 }, } },
/* timedia_4095a */ { 2, { { 2, 3 }, { 4, 5 }, } },
/* timedia_4096a */ { 2, { { 2, 3 }, { 4, 5 }, } },
/* timedia_4078u */ { 1, { { 2, -1 }, } },
/* timedia_4079a */ { 1, { { 2, 3 }, } },
/* timedia_4085u */ { 2, { { 2, -1 }, { 4, -1 }, } },
/* timedia_4079r */ { 1, { { 2, 3 }, } },
/* timedia_4079s */ { 1, { { 2, 3 }, } },
/* timedia_4079d */ { 1, { { 2, 3 }, } },
/* timedia_4079e */ { 1, { { 2, 3 }, } },
/* timedia_4079f */ { 1, { { 2, 3 }, } },
/* timedia_9079a */ { 1, { { 2, 3 }, } },
/* timedia_9079b */ { 1, { { 2, 3 }, } },
/* timedia_9079c */ { 1, { { 2, 3 }, } },
/* wch_ch353_1s1p*/ { 1, { { 1, -1}, } },
/* wch_ch353_2s1p*/ { 1, { { 2, -1}, } },
/* wch_ch382_0s1p*/ { 1, { { 2, -1}, } },
/* wch_ch382_2s1p*/ { 1, { { 2, -1}, } },
/* brainboxes_5s1p */ { 1, { { 3, -1 }, } },
/* sunix_4008a */ { 1, { { 1, 2 }, } },
/* sunix_5069a */ { 1, { { 1, 2 }, } },
/* sunix_5079a */ { 1, { { 1, 2 }, } },
/* sunix_5099a */ { 1, { { 1, 2 }, } },
};
static struct pci_device_id parport_serial_pci_tbl[] = {
/* PCI cards */
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_110L,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_110l },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_210L,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_210l },
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9735,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9745,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9845,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
parport: netmos 9845 & 9855 1P4S fixes netmos serial/parallel adapters come in different flavour differing only by the number of parallel and serial ports, which are encoded in the subdevice ID. Last fix of Christian Pellegrin for 9855 2P2S broke support for 9855 1P4S, and works only by side-effect for the first parallel port of a 2P2S, as this first parallel port is found by reading the second addr entry of (struct parport_pc_pci) cards[netmos_9855], which is not initialized, and hence has value 0, which happens to be the BAR of the first parallel port. netmos_9xx5_combo entry in (struct parport_pc_pci) cards[], which is used for a 9845 1P4S must also be fixed for the parallel port support when there are 4 serial ports because this entry currently gives 2 as BAR index for the parallel port. Actually, in this case, BAR 2 is the 3rd serial port while the parallel port is at BAR 4. I fixed 9845 1P4S and 9855 1P4S support, while preserving 9855 2P2S support, - by creating a netmos_9855_2p entry and using it for 9855 boards with 2 parallel ports : 9855 2P2S and 9855 2P0S boards, - and by allowing netmos_parallel_init to change not only the number of parallel ports (0 or 1), but making it also change the BAR index of the parallel port when the serial ports are before the parallel port. PS: the netmos_9855_2p entry in (struct pciserial_board) pci_parport_serial_boards[] is needed because netmos_parallel_init has no clean way to replace FL_BASE2 by FL_BASE4 in the description of the serial ports in function of the number of parallel ports on the card. Tested with 9845 1P4S, 9855 1P4S and 9855 2P2S boards. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Tested-by: Christian Pellegrin <chripell@fsfe.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 23:58:53 +00:00
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,
0x1000, 0x0020, 0, 0, netmos_9855_2p },
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,
0x1000, 0x0022, 0, 0, netmos_9855_2p },
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9855 },
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
0xA000, 0x3011, 0, 0, netmos_9900 },
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
0xA000, 0x3012, 0, 0, netmos_9900 },
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
0xA000, 0x3020, 0, 0, netmos_9900_2p },
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9912,
0xA000, 0x2000, 0, 0, netmos_99xx_1p },
/* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/
{ PCI_VENDOR_ID_AFAVLAB, 0x2110,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p },
{ PCI_VENDOR_ID_AFAVLAB, 0x2111,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p },
{ PCI_VENDOR_ID_AFAVLAB, 0x2112,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p },
{ PCI_VENDOR_ID_AFAVLAB, 0x2140,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p },
{ PCI_VENDOR_ID_AFAVLAB, 0x2141,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p },
{ PCI_VENDOR_ID_AFAVLAB, 0x2142,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p },
{ PCI_VENDOR_ID_AFAVLAB, 0x2160,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p },
{ PCI_VENDOR_ID_AFAVLAB, 0x2161,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p },
{ PCI_VENDOR_ID_AFAVLAB, 0x2162,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_550,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_650,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_850,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_550,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_650,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_850,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_550,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_650,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_850,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_550,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_650,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_20x },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_850,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_20x },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_550,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_650,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_850,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
/* PCI_VENDOR_ID_TIMEDIA/SUNIX has many differing cards ...*/
{ 0x1409, 0x7168, 0x1409, 0x4078, 0, 0, timedia_4078a },
{ 0x1409, 0x7168, 0x1409, 0x4079, 0, 0, timedia_4079h },
{ 0x1409, 0x7168, 0x1409, 0x4085, 0, 0, timedia_4085h },
{ 0x1409, 0x7168, 0x1409, 0x4088, 0, 0, timedia_4088a },
{ 0x1409, 0x7168, 0x1409, 0x4089, 0, 0, timedia_4089a },
{ 0x1409, 0x7168, 0x1409, 0x4095, 0, 0, timedia_4095a },
{ 0x1409, 0x7168, 0x1409, 0x4096, 0, 0, timedia_4096a },
{ 0x1409, 0x7168, 0x1409, 0x5078, 0, 0, timedia_4078u },
{ 0x1409, 0x7168, 0x1409, 0x5079, 0, 0, timedia_4079a },
{ 0x1409, 0x7168, 0x1409, 0x5085, 0, 0, timedia_4085u },
{ 0x1409, 0x7168, 0x1409, 0x6079, 0, 0, timedia_4079r },
{ 0x1409, 0x7168, 0x1409, 0x7079, 0, 0, timedia_4079s },
{ 0x1409, 0x7168, 0x1409, 0x8079, 0, 0, timedia_4079d },
{ 0x1409, 0x7168, 0x1409, 0x9079, 0, 0, timedia_4079e },
{ 0x1409, 0x7168, 0x1409, 0xa079, 0, 0, timedia_4079f },
{ 0x1409, 0x7168, 0x1409, 0xb079, 0, 0, timedia_9079a },
{ 0x1409, 0x7168, 0x1409, 0xc079, 0, 0, timedia_9079b },
{ 0x1409, 0x7168, 0x1409, 0xd079, 0, 0, timedia_9079c },
/* WCH CARDS */
{ 0x4348, 0x5053, PCI_ANY_ID, PCI_ANY_ID, 0, 0, wch_ch353_1s1p},
{ 0x4348, 0x7053, 0x4348, 0x3253, 0, 0, wch_ch353_2s1p},
{ 0x1c00, 0x3050, 0x1c00, 0x3050, 0, 0, wch_ch382_0s1p},
{ 0x1c00, 0x3250, 0x1c00, 0x3250, 0, 0, wch_ch382_2s1p},
/* BrainBoxes PX272/PX306 MIO card */
{ PCI_VENDOR_ID_INTASHIELD, 0x4100,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, brainboxes_5s1p },
/* Sunix boards */
{ PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999, PCI_VENDOR_ID_SUNIX,
0x0100, 0, 0, sunix_4008a },
{ PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999, PCI_VENDOR_ID_SUNIX,
0x0101, 0, 0, sunix_5069a },
{ PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999, PCI_VENDOR_ID_SUNIX,
0x0102, 0, 0, sunix_5079a },
{ PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999, PCI_VENDOR_ID_SUNIX,
0x0104, 0, 0, sunix_5099a },
{ 0, } /* terminate list */
};
MODULE_DEVICE_TABLE(pci,parport_serial_pci_tbl);
/*
* This table describes the serial "geometry" of these boards. Any
* quirks for these can be found in drivers/serial/8250_pci.c
*
* Cards not tested are marked n/t
* If you have one of these cards and it works for you, please tell me..
*/
static struct pciserial_board pci_parport_serial_boards[] = {
[titan_110l] = {
.flags = FL_BASE1 | FL_BASE_BARS,
.num_ports = 1,
.base_baud = 921600,
.uart_offset = 8,
},
[titan_210l] = {
.flags = FL_BASE1 | FL_BASE_BARS,
.num_ports = 2,
.base_baud = 921600,
.uart_offset = 8,
},
[netmos_9xx5_combo] = {
.flags = FL_BASE0 | FL_BASE_BARS,
.num_ports = 1,
.base_baud = 115200,
.uart_offset = 8,
},
[netmos_9855] = {
parport: netmos 9845 & 9855 1P4S fixes netmos serial/parallel adapters come in different flavour differing only by the number of parallel and serial ports, which are encoded in the subdevice ID. Last fix of Christian Pellegrin for 9855 2P2S broke support for 9855 1P4S, and works only by side-effect for the first parallel port of a 2P2S, as this first parallel port is found by reading the second addr entry of (struct parport_pc_pci) cards[netmos_9855], which is not initialized, and hence has value 0, which happens to be the BAR of the first parallel port. netmos_9xx5_combo entry in (struct parport_pc_pci) cards[], which is used for a 9845 1P4S must also be fixed for the parallel port support when there are 4 serial ports because this entry currently gives 2 as BAR index for the parallel port. Actually, in this case, BAR 2 is the 3rd serial port while the parallel port is at BAR 4. I fixed 9845 1P4S and 9855 1P4S support, while preserving 9855 2P2S support, - by creating a netmos_9855_2p entry and using it for 9855 boards with 2 parallel ports : 9855 2P2S and 9855 2P0S boards, - and by allowing netmos_parallel_init to change not only the number of parallel ports (0 or 1), but making it also change the BAR index of the parallel port when the serial ports are before the parallel port. PS: the netmos_9855_2p entry in (struct pciserial_board) pci_parport_serial_boards[] is needed because netmos_parallel_init has no clean way to replace FL_BASE2 by FL_BASE4 in the description of the serial ports in function of the number of parallel ports on the card. Tested with 9845 1P4S, 9855 1P4S and 9855 2P2S boards. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Tested-by: Christian Pellegrin <chripell@fsfe.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 23:58:53 +00:00
.flags = FL_BASE2 | FL_BASE_BARS,
.num_ports = 1,
.base_baud = 115200,
.uart_offset = 8,
},
[netmos_9855_2p] = {
.flags = FL_BASE4 | FL_BASE_BARS,
.num_ports = 1,
.base_baud = 115200,
.uart_offset = 8,
},
[netmos_9900] = { /* n/t */
.flags = FL_BASE0 | FL_BASE_BARS,
.num_ports = 1,
.base_baud = 115200,
.uart_offset = 8,
},
[netmos_9900_2p] = { /* parallel only */ /* n/t */
.flags = FL_BASE0,
.num_ports = 0,
.base_baud = 115200,
.uart_offset = 8,
},
[netmos_99xx_1p] = { /* parallel only */ /* n/t */
.flags = FL_BASE0,
.num_ports = 0,
.base_baud = 115200,
.uart_offset = 8,
},
[avlab_1s1p] = { /* n/t */
.flags = FL_BASE0 | FL_BASE_BARS,
.num_ports = 1,
.base_baud = 115200,
.uart_offset = 8,
},
[avlab_1s2p] = { /* n/t */
.flags = FL_BASE0 | FL_BASE_BARS,
.num_ports = 1,
.base_baud = 115200,
.uart_offset = 8,
},
[avlab_2s1p] = { /* n/t */
.flags = FL_BASE0 | FL_BASE_BARS,
.num_ports = 2,
.base_baud = 115200,
.uart_offset = 8,
},
[siig_1s1p_10x] = {
.flags = FL_BASE2,
.num_ports = 1,
.base_baud = 460800,
.uart_offset = 8,
},
[siig_2s1p_10x] = {
.flags = FL_BASE2,
.num_ports = 1,
.base_baud = 921600,
.uart_offset = 8,
},
[siig_2p1s_20x] = {
.flags = FL_BASE0,
.num_ports = 1,
.base_baud = 921600,
.uart_offset = 8,
},
[siig_1s1p_20x] = {
.flags = FL_BASE0,
.num_ports = 1,
.base_baud = 921600,
.uart_offset = 8,
},
[siig_2s1p_20x] = {
.flags = FL_BASE0,
.num_ports = 1,
.base_baud = 921600,
.uart_offset = 8,
},
[timedia_4078a] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 1,
.base_baud = 921600,
.uart_offset = 8,
},
[timedia_4079h] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 1,
.base_baud = 921600,
.uart_offset = 8,
},
[timedia_4085h] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 1,
.base_baud = 921600,
.uart_offset = 8,
},
[timedia_4088a] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 1,
.base_baud = 921600,
.uart_offset = 8,
},
[timedia_4089a] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 1,
.base_baud = 921600,
.uart_offset = 8,
},
[timedia_4095a] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 1,
.base_baud = 921600,
.uart_offset = 8,
},
[timedia_4096a] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 1,
.base_baud = 921600,
.uart_offset = 8,
},
[timedia_4078u] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 1,
.base_baud = 921600,
.uart_offset = 8,
},
[timedia_4079a] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 1,
.base_baud = 921600,
.uart_offset = 8,
},
[timedia_4085u] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 1,
.base_baud = 921600,
.uart_offset = 8,
},
[timedia_4079r] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 1,
.base_baud = 921600,
.uart_offset = 8,
},
[timedia_4079s] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 1,
.base_baud = 921600,
.uart_offset = 8,
},
[timedia_4079d] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 1,
.base_baud = 921600,
.uart_offset = 8,
},
[timedia_4079e] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 1,
.base_baud = 921600,
.uart_offset = 8,
},
[timedia_4079f] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 1,
.base_baud = 921600,
.uart_offset = 8,
},
[timedia_9079a] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 1,
.base_baud = 921600,
.uart_offset = 8,
},
[timedia_9079b] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 1,
.base_baud = 921600,
.uart_offset = 8,
},
[timedia_9079c] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 1,
.base_baud = 921600,
.uart_offset = 8,
},
[wch_ch353_1s1p] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 1,
.base_baud = 115200,
.uart_offset = 8,
},
[wch_ch353_2s1p] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 2,
.base_baud = 115200,
.uart_offset = 8,
},
[wch_ch382_0s1p] = {
.flags = FL_BASE0,
.num_ports = 0,
.base_baud = 115200,
.uart_offset = 8,
},
[wch_ch382_2s1p] = {
.flags = FL_BASE0,
.num_ports = 2,
.base_baud = 115200,
.uart_offset = 8,
.first_offset = 0xC0,
},
[brainboxes_5s1p] = {
.flags = FL_BASE2,
.num_ports = 5,
.base_baud = 921600,
.uart_offset = 8,
},
[sunix_4008a] = {
.num_ports = 0,
},
[sunix_5069a] = {
.num_ports = 1,
.base_baud = 921600,
.uart_offset = 0x8,
},
[sunix_5079a] = {
.num_ports = 2,
.base_baud = 921600,
.uart_offset = 0x8,
},
[sunix_5099a] = {
.num_ports = 4,
.base_baud = 921600,
.uart_offset = 0x8,
},
};
struct parport_serial_private {
struct serial_private *serial;
int num_par;
struct parport *port[PARPORT_MAX];
struct parport_pc_pci par;
};
/* Register the serial port(s) of a PCI card. */
static int serial_register(struct pci_dev *dev, const struct pci_device_id *id)
{
struct parport_serial_private *priv = pci_get_drvdata (dev);
struct pciserial_board *board;
struct serial_private *serial;
board = &pci_parport_serial_boards[id->driver_data];
if (board->num_ports == 0)
return 0;
serial = pciserial_init_ports(dev, board);
if (IS_ERR(serial))
return PTR_ERR(serial);
priv->serial = serial;
return 0;
}
/* Register the parallel port(s) of a PCI card. */
static int parport_register(struct pci_dev *dev, const struct pci_device_id *id)
{
struct parport_pc_pci *card;
struct parport_serial_private *priv = pci_get_drvdata (dev);
int n, success = 0;
priv->par = cards[id->driver_data];
card = &priv->par;
if (card->preinit_hook &&
card->preinit_hook (dev, card, PARPORT_IRQ_NONE, PARPORT_DMA_NONE))
return -ENODEV;
for (n = 0; n < card->numports; n++) {
struct parport *port;
int lo = card->addr[n].lo;
int hi = card->addr[n].hi;
unsigned long io_lo, io_hi;
int irq;
if (priv->num_par == ARRAY_SIZE (priv->port)) {
dev_warn(&dev->dev,
"only %zu parallel ports supported (%d reported)\n",
ARRAY_SIZE(priv->port), card->numports);
break;
}
io_lo = pci_resource_start (dev, lo);
io_hi = 0;
if ((hi >= 0) && (hi <= 6))
io_hi = pci_resource_start (dev, hi);
else if (hi > 6)
io_lo += hi; /* Reinterpret the meaning of
"hi" as an offset (see SYBA
def.) */
/* TODO: test if sharing interrupts works */
irq = dev->irq;
if (irq == IRQ_NONE) {
dev_dbg(&dev->dev,
"PCI parallel port detected: I/O at %#lx(%#lx)\n",
io_lo, io_hi);
irq = PARPORT_IRQ_NONE;
} else {
dev_dbg(&dev->dev,
"PCI parallel port detected: I/O at %#lx(%#lx), IRQ %d\n",
io_lo, io_hi, irq);
}
port = parport_pc_probe_port (io_lo, io_hi, irq,
PARPORT_DMA_NONE, &dev->dev, IRQF_SHARED);
if (port) {
priv->port[priv->num_par++] = port;
success = 1;
}
}
if (card->postinit_hook)
card->postinit_hook (dev, card, !success);
return 0;
}
static int parport_serial_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
struct parport_serial_private *priv;
int err;
priv = devm_kzalloc(&dev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
pci_set_drvdata (dev, priv);
err = pcim_enable_device(dev);
if (err)
return err;
err = parport_register(dev, id);
if (err)
return err;
err = serial_register(dev, id);
if (err) {
int i;
for (i = 0; i < priv->num_par; i++)
parport_pc_unregister_port (priv->port[i]);
return err;
}
return 0;
}
static void parport_serial_pci_remove(struct pci_dev *dev)
{
struct parport_serial_private *priv = pci_get_drvdata (dev);
int i;
// Serial ports
if (priv->serial)
pciserial_remove_ports(priv->serial);
// Parallel ports
for (i = 0; i < priv->num_par; i++)
parport_pc_unregister_port (priv->port[i]);
return;
}
static int __maybe_unused parport_serial_pci_suspend(struct device *dev)
{
struct parport_serial_private *priv = dev_get_drvdata(dev);
if (priv->serial)
pciserial_suspend_ports(priv->serial);
/* FIXME: What about parport? */
return 0;
}
static int __maybe_unused parport_serial_pci_resume(struct device *dev)
{
struct parport_serial_private *priv = dev_get_drvdata(dev);
if (priv->serial)
pciserial_resume_ports(priv->serial);
/* FIXME: What about parport? */
return 0;
}
static SIMPLE_DEV_PM_OPS(parport_serial_pm_ops,
parport_serial_pci_suspend, parport_serial_pci_resume);
static struct pci_driver parport_serial_pci_driver = {
.name = "parport_serial",
.id_table = parport_serial_pci_tbl,
.probe = parport_serial_pci_probe,
.remove = parport_serial_pci_remove,
.driver = {
.pm = &parport_serial_pm_ops,
},
};
module_pci_driver(parport_serial_pci_driver);
MODULE_AUTHOR("Tim Waugh <twaugh@redhat.com>");
MODULE_DESCRIPTION("Driver for common parallel+serial multi-I/O PCI cards");
MODULE_LICENSE("GPL");