leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
c9b23e0c30
linux/arch/sparc64/mm/ultra.S

800 lines
19 KiB
ArmAsm
Raw Normal View History

sparc64: remove CVS keywords This patch removes the CVS keywords that weren't updated for a long time from comments. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-19 23:52:27 +00:00
/*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* ultra.S: Don't expand these all over the place...
*
sparc64: Add global register dumping facility. When a cpu really is stuck in the kernel, it can be often impossible to figure out which cpu is stuck where. The worst case is when the stuck cpu has interrupts disabled. Therefore, implement a global cpu state capture that uses SMP message interrupts which are not disabled by the normal IRQ enable/disable APIs of the kernel. As long as we can get a sysrq 'y' to the kernel, we can get a dump. Even if the console interrupt cpu is wedged, we can trigger it from userspace using /proc/sysrq-trigger The output is made compact so that this facility is more useful on high cpu count systems, which is where this facility will likely find itself the most useful :) Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-20 06:46:00 +00:00
* Copyright (C) 1997, 2000, 2008 David S. Miller (davem@davemloft.net)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
#include <asm/asi.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/spitfire.h>
#include <asm/mmu_context.h>
[SPARC64]: Preserve nucleus ctx page size during TLB flushes. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-31 03:21:34 +00:00
#include <asm/mmu.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <asm/pil.h>
#include <asm/head.h>
#include <asm/thread_info.h>
#include <asm/cacheflush.h>
[SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 11:08:37 +00:00
#include <asm/hypervisor.h>
sparc64: Add global register dumping facility. When a cpu really is stuck in the kernel, it can be often impossible to figure out which cpu is stuck where. The worst case is when the stuck cpu has interrupts disabled. Therefore, implement a global cpu state capture that uses SMP message interrupts which are not disabled by the normal IRQ enable/disable APIs of the kernel. As long as we can get a sysrq 'y' to the kernel, we can get a dump. Even if the console interrupt cpu is wedged, we can trigger it from userspace using /proc/sysrq-trigger The output is made compact so that this facility is more useful on high cpu count systems, which is where this facility will likely find itself the most useful :) Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-20 06:46:00 +00:00
#include <asm/cpudata.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Basically, most of the Spitfire vs. Cheetah madness
* has to do with the fact that Cheetah does not support
* IMMU flushes out of the secondary context. Someone needs
* to throw a south lake birthday party for the folks
* in Microelectronics who refused to fix this shit.
*/
/* This file is meant to be read efficiently by the CPU, not humans.
* Staraj sie tego nikomu nie pierdolnac...
*/
.text
.align 32
.globl __flush_tlb_mm
[SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 11:08:37 +00:00
__flush_tlb_mm: /* 18 insns */
/* %o0=(ctx & TAG_CONTEXT_BITS), %o1=SECONDARY_CONTEXT */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ldxa [%o1] ASI_DMMU, %g2
cmp %g2, %o0
bne,pn %icc, __spitfire_flush_tlb_mm_slow
mov 0x50, %g3
stxa %g0, [%g3] ASI_DMMU_DEMAP
stxa %g0, [%g3] ASI_IMMU_DEMAP
[SPARC64]: Fix bogus flush instruction usage. Some of the trap code was still assuming that alternate global %g6 was hard coded with current_thread_info(). Let's just consistently flush at KERNBASE when we need a pipeline synchronization. That's locked into the TLB and will always work. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-01 02:33:00 +00:00
sethi %hi(KERNBASE), %g3
flush %g3
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
retl
[SPARC64]: Fix bogus flush instruction usage. Some of the trap code was still assuming that alternate global %g6 was hard coded with current_thread_info(). Let's just consistently flush at KERNBASE when we need a pipeline synchronization. That's locked into the TLB and will always work. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-01 02:33:00 +00:00
nop
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
nop
nop
nop
nop
nop
nop
nop
[SPARC64]: Preserve nucleus ctx page size during TLB flushes. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-31 03:21:34 +00:00
nop
nop
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.align 32
.globl __flush_tlb_pending
[SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 11:08:37 +00:00
__flush_tlb_pending: /* 26 insns */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* %o0 = context, %o1 = nr, %o2 = vaddrs[] */
rdpr %pstate, %g7
sllx %o1, 3, %o1
andn %g7, PSTATE_IE, %g2
wrpr %g2, %pstate
mov SECONDARY_CONTEXT, %o4
ldxa [%o4] ASI_DMMU, %g2
stxa %o0, [%o4] ASI_DMMU
1: sub %o1, (1 << 3), %o1
ldx [%o2 + %o1], %o3
andcc %o3, 1, %g0
andn %o3, 1, %o3
be,pn %icc, 2f
or %o3, 0x10, %o3
stxa %g0, [%o3] ASI_IMMU_DEMAP
2: stxa %g0, [%o3] ASI_DMMU_DEMAP
membar #Sync
brnz,pt %o1, 1b
nop
stxa %g2, [%o4] ASI_DMMU
[SPARC64]: Fix bogus flush instruction usage. Some of the trap code was still assuming that alternate global %g6 was hard coded with current_thread_info(). Let's just consistently flush at KERNBASE when we need a pipeline synchronization. That's locked into the TLB and will always work. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-01 02:33:00 +00:00
sethi %hi(KERNBASE), %o4
flush %o4
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
retl
wrpr %g7, 0x0, %pstate
[SPARC64]: Fix UltraSPARC-III fallout from membar changes. The membar changes made the size of __cheetah_flush_tlb_pending grow by one instruction, but the boot-time code patching was not updated to match. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-06 02:45:24 +00:00
nop
[SPARC64]: Preserve nucleus ctx page size during TLB flushes. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-31 03:21:34 +00:00
nop
nop
nop
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.align 32
.globl __flush_tlb_kernel_range
[SPARC64]: Fix comment typo in __flush_tlb_kernel_range. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-16 04:35:10 +00:00
__flush_tlb_kernel_range: /* 16 insns */
[SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 11:08:37 +00:00
/* %o0=start, %o1=end */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
cmp %o0, %o1
be,pn %xcc, 2f
sethi %hi(PAGE_SIZE), %o4
sub %o1, %o0, %o3
sub %o3, %o4, %o3
or %o0, 0x20, %o0 ! Nucleus
1: stxa %g0, [%o0 + %o3] ASI_DMMU_DEMAP
stxa %g0, [%o0 + %o3] ASI_IMMU_DEMAP
membar #Sync
brnz,pt %o3, 1b
sub %o3, %o4, %o3
[SPARC64]: Fix bogus flush instruction usage. Some of the trap code was still assuming that alternate global %g6 was hard coded with current_thread_info(). Let's just consistently flush at KERNBASE when we need a pipeline synchronization. That's locked into the TLB and will always work. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-01 02:33:00 +00:00
2: sethi %hi(KERNBASE), %o3
flush %o3
retl
nop
[SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 11:08:37 +00:00
nop
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
__spitfire_flush_tlb_mm_slow:
rdpr %pstate, %g1
wrpr %g1, PSTATE_IE, %pstate
stxa %o0, [%o1] ASI_DMMU
stxa %g0, [%g3] ASI_DMMU_DEMAP
stxa %g0, [%g3] ASI_IMMU_DEMAP
flush %g6
stxa %g2, [%o1] ASI_DMMU
[SPARC64]: Fix bogus flush instruction usage. Some of the trap code was still assuming that alternate global %g6 was hard coded with current_thread_info(). Let's just consistently flush at KERNBASE when we need a pipeline synchronization. That's locked into the TLB and will always work. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-01 02:33:00 +00:00
sethi %hi(KERNBASE), %o1
flush %o1
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
retl
wrpr %g1, 0, %pstate
/*
* The following code flushes one page_size worth.
*/
[PATCH] kprobes-prevent-possible-race-conditions-sparc64-changes fix This patch adds flags "ax" to .kprobe.text section. Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-06 22:19:31 +00:00
.section .kprobes.text, "ax"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.align 32
.globl __flush_icache_page
__flush_icache_page: /* %o0 = phys_page */
membar #StoreStore
srlx %o0, PAGE_SHIFT, %o0
sethi %uhi(PAGE_OFFSET), %g1
sllx %o0, PAGE_SHIFT, %o0
sethi %hi(PAGE_SIZE), %g2
sllx %g1, 32, %g1
add %o0, %g1, %o0
1: subcc %g2, 32, %g2
bne,pt %icc, 1b
flush %o0 + %g2
retl
nop
#ifdef DCACHE_ALIASING_POSSIBLE
#if (PAGE_SHIFT != 13)
#error only page shift of 13 is supported by dcache flush
#endif
#define DTAG_MASK 0x3
[SPARC64]: Simplify Spitfire D-cache page flush. It tries to batch up the tag loads and comparisons, and then the stores. And this is just complicated instead of efficient. Also, make the symbol of the Cheetah version more grepable. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-26 23:06:03 +00:00
/* This routine is Spitfire specific so the hardcoded
* D-cache size and line-size are OK.
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.align 64
.globl __flush_dcache_page
__flush_dcache_page: /* %o0=kaddr, %o1=flush_icache */
sethi %uhi(PAGE_OFFSET), %g1
sllx %g1, 32, %g1
[SPARC64]: Simplify Spitfire D-cache page flush. It tries to batch up the tag loads and comparisons, and then the stores. And this is just complicated instead of efficient. Also, make the symbol of the Cheetah version more grepable. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-26 23:06:03 +00:00
sub %o0, %g1, %o0 ! physical address
srlx %o0, 11, %o0 ! make D-cache TAG
sethi %hi(1 << 14), %o2 ! D-cache size
sub %o2, (1 << 5), %o2 ! D-cache line size
1: ldxa [%o2] ASI_DCACHE_TAG, %o3 ! load D-cache TAG
andcc %o3, DTAG_MASK, %g0 ! Valid?
be,pn %xcc, 2f ! Nope, branch
andn %o3, DTAG_MASK, %o3 ! Clear valid bits
cmp %o3, %o0 ! TAG match?
bne,pt %xcc, 2f ! Nope, branch
nop
stxa %g0, [%o2] ASI_DCACHE_TAG ! Invalidate TAG
membar #Sync
2: brnz,pt %o2, 1b
sub %o2, (1 << 5), %o2 ! D-cache line size
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* The I-cache does not snoop local stores so we
* better flush that too when necessary.
*/
brnz,pt %o1, __flush_icache_page
sllx %o0, 11, %o0
retl
nop
#endif /* DCACHE_ALIASING_POSSIBLE */
[SPARC64]: Simplify Spitfire D-cache page flush. It tries to batch up the tag loads and comparisons, and then the stores. And this is just complicated instead of efficient. Also, make the symbol of the Cheetah version more grepable. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-26 23:06:03 +00:00
.previous
[SPARC64]: Preserve nucleus ctx page size during TLB flushes. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-31 03:21:34 +00:00
/* Cheetah specific versions, patched at boot time. */
[SPARC64]: Fix bogus flush instruction usage. Some of the trap code was still assuming that alternate global %g6 was hard coded with current_thread_info(). Let's just consistently flush at KERNBASE when we need a pipeline synchronization. That's locked into the TLB and will always work. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-01 02:33:00 +00:00
__cheetah_flush_tlb_mm: /* 19 insns */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
rdpr %pstate, %g7
andn %g7, PSTATE_IE, %g2
wrpr %g2, 0x0, %pstate
wrpr %g0, 1, %tl
mov PRIMARY_CONTEXT, %o2
mov 0x40, %g3
ldxa [%o2] ASI_DMMU, %g2
[SPARC64]: Preserve nucleus ctx page size during TLB flushes. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-31 03:21:34 +00:00
srlx %g2, CTX_PGSZ1_NUC_SHIFT, %o1
sllx %o1, CTX_PGSZ1_NUC_SHIFT, %o1
or %o0, %o1, %o0 /* Preserve nucleus page size fields */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
stxa %o0, [%o2] ASI_DMMU
stxa %g0, [%g3] ASI_DMMU_DEMAP
stxa %g0, [%g3] ASI_IMMU_DEMAP
stxa %g2, [%o2] ASI_DMMU
[SPARC64]: Fix bogus flush instruction usage. Some of the trap code was still assuming that alternate global %g6 was hard coded with current_thread_info(). Let's just consistently flush at KERNBASE when we need a pipeline synchronization. That's locked into the TLB and will always work. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-01 02:33:00 +00:00
sethi %hi(KERNBASE), %o2
flush %o2
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
wrpr %g0, 0, %tl
retl
wrpr %g7, 0x0, %pstate
[SPARC64]: Fix bogus flush instruction usage. Some of the trap code was still assuming that alternate global %g6 was hard coded with current_thread_info(). Let's just consistently flush at KERNBASE when we need a pipeline synchronization. That's locked into the TLB and will always work. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-01 02:33:00 +00:00
__cheetah_flush_tlb_pending: /* 27 insns */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* %o0 = context, %o1 = nr, %o2 = vaddrs[] */
rdpr %pstate, %g7
sllx %o1, 3, %o1
andn %g7, PSTATE_IE, %g2
wrpr %g2, 0x0, %pstate
wrpr %g0, 1, %tl
mov PRIMARY_CONTEXT, %o4
ldxa [%o4] ASI_DMMU, %g2
[SPARC64]: Preserve nucleus ctx page size during TLB flushes. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-31 03:21:34 +00:00
srlx %g2, CTX_PGSZ1_NUC_SHIFT, %o3
sllx %o3, CTX_PGSZ1_NUC_SHIFT, %o3
or %o0, %o3, %o0 /* Preserve nucleus page size fields */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
stxa %o0, [%o4] ASI_DMMU
1: sub %o1, (1 << 3), %o1
ldx [%o2 + %o1], %o3
andcc %o3, 1, %g0
be,pn %icc, 2f
andn %o3, 1, %o3
stxa %g0, [%o3] ASI_IMMU_DEMAP
2: stxa %g0, [%o3] ASI_DMMU_DEMAP
[SPARC64]: Avoid membar instructions in delay slots. In particular, avoid membar instructions in the delay slot of a jmpl instruction. UltraSPARC-I, II, IIi, and IIe have a bug, documented in the UltraSPARC-IIi User's Manual, Appendix K, Erratum 51 The long and short of it is that if the IMU unit misses on a branch or jmpl, and there is a store buffer synchronizing membar in the delay slot, the chip can stop fetching instructions. If interrupts are enabled or some other trap is enabled, the chip will unwedge itself, but performance will suffer. We already had a workaround for this bug in a few spots, but it's better to have the entire tree sanitized for this rule. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-27 22:42:04 +00:00
membar #Sync
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
brnz,pt %o1, 1b
[SPARC64]: Avoid membar instructions in delay slots. In particular, avoid membar instructions in the delay slot of a jmpl instruction. UltraSPARC-I, II, IIi, and IIe have a bug, documented in the UltraSPARC-IIi User's Manual, Appendix K, Erratum 51 The long and short of it is that if the IMU unit misses on a branch or jmpl, and there is a store buffer synchronizing membar in the delay slot, the chip can stop fetching instructions. If interrupts are enabled or some other trap is enabled, the chip will unwedge itself, but performance will suffer. We already had a workaround for this bug in a few spots, but it's better to have the entire tree sanitized for this rule. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-27 22:42:04 +00:00
nop
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
stxa %g2, [%o4] ASI_DMMU
[SPARC64]: Fix bogus flush instruction usage. Some of the trap code was still assuming that alternate global %g6 was hard coded with current_thread_info(). Let's just consistently flush at KERNBASE when we need a pipeline synchronization. That's locked into the TLB and will always work. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-01 02:33:00 +00:00
sethi %hi(KERNBASE), %o4
flush %o4
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
wrpr %g0, 0, %tl
retl
wrpr %g7, 0x0, %pstate
#ifdef DCACHE_ALIASING_POSSIBLE
[SPARC64]: Simplify Spitfire D-cache page flush. It tries to batch up the tag loads and comparisons, and then the stores. And this is just complicated instead of efficient. Also, make the symbol of the Cheetah version more grepable. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-26 23:06:03 +00:00
__cheetah_flush_dcache_page: /* 11 insns */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
sethi %uhi(PAGE_OFFSET), %g1
sllx %g1, 32, %g1
sub %o0, %g1, %o0
sethi %hi(PAGE_SIZE), %o4
1: subcc %o4, (1 << 5), %o4
stxa %g0, [%o0 + %o4] ASI_DCACHE_INVALIDATE
membar #Sync
bne,pt %icc, 1b
nop
retl /* I-cache flush never needed on Cheetah, see callers. */
nop
#endif /* DCACHE_ALIASING_POSSIBLE */
[SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 11:08:37 +00:00
/* Hypervisor specific versions, patched at boot time. */
[SPARC64]: Bulletproof hypervisor TLB flushing. Check TLB flush hypervisor calls for errors and report them. Pass HV_MMU_ALL always for now, we can add back the optimization to avoid the I-TLB flush later. Always explicitly page align the virtual address arguments. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 03:31:49 +00:00
__hypervisor_tlb_tl0_error:
save %sp, -192, %sp
mov %i0, %o0
call hypervisor_tlbop_error
mov %i1, %o1
ret
restore
__hypervisor_flush_tlb_mm: /* 10 insns */
[SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 11:08:37 +00:00
mov %o0, %o2 /* ARG2: mmu context */
mov 0, %o0 /* ARG0: CPU lists unimplemented */
mov 0, %o1 /* ARG1: CPU lists unimplemented */
mov HV_MMU_ALL, %o3 /* ARG3: flags */
mov HV_FAST_MMU_DEMAP_CTX, %o5
ta HV_FAST_TRAP
[SPARC64]: Bulletproof hypervisor TLB flushing. Check TLB flush hypervisor calls for errors and report them. Pass HV_MMU_ALL always for now, we can add back the optimization to avoid the I-TLB flush later. Always explicitly page align the virtual address arguments. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 03:31:49 +00:00
brnz,pn %o0, __hypervisor_tlb_tl0_error
mov HV_FAST_MMU_DEMAP_CTX, %o1
[SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 11:08:37 +00:00
retl
nop
[SPARC64]: Bulletproof hypervisor TLB flushing. Check TLB flush hypervisor calls for errors and report them. Pass HV_MMU_ALL always for now, we can add back the optimization to avoid the I-TLB flush later. Always explicitly page align the virtual address arguments. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 03:31:49 +00:00
__hypervisor_flush_tlb_pending: /* 16 insns */
[SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 11:08:37 +00:00
/* %o0 = context, %o1 = nr, %o2 = vaddrs[] */
sllx %o1, 3, %g1
mov %o2, %g2
mov %o0, %g3
1: sub %g1, (1 << 3), %g1
ldx [%g2 + %g1], %o0 /* ARG0: vaddr + IMMU-bit */
mov %g3, %o1 /* ARG1: mmu context */
[SPARC64]: Bulletproof hypervisor TLB flushing. Check TLB flush hypervisor calls for errors and report them. Pass HV_MMU_ALL always for now, we can add back the optimization to avoid the I-TLB flush later. Always explicitly page align the virtual address arguments. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 03:31:49 +00:00
mov HV_MMU_ALL, %o2 /* ARG2: flags */
srlx %o0, PAGE_SHIFT, %o0
sllx %o0, PAGE_SHIFT, %o0
[SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 11:08:37 +00:00
ta HV_MMU_UNMAP_ADDR_TRAP
[SPARC64]: Bulletproof hypervisor TLB flushing. Check TLB flush hypervisor calls for errors and report them. Pass HV_MMU_ALL always for now, we can add back the optimization to avoid the I-TLB flush later. Always explicitly page align the virtual address arguments. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 03:31:49 +00:00
brnz,pn %o0, __hypervisor_tlb_tl0_error
mov HV_MMU_UNMAP_ADDR_TRAP, %o1
[SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 11:08:37 +00:00
brnz,pt %g1, 1b
nop
retl
nop
[SPARC64]: Bulletproof hypervisor TLB flushing. Check TLB flush hypervisor calls for errors and report them. Pass HV_MMU_ALL always for now, we can add back the optimization to avoid the I-TLB flush later. Always explicitly page align the virtual address arguments. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 03:31:49 +00:00
__hypervisor_flush_tlb_kernel_range: /* 16 insns */
[SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 11:08:37 +00:00
/* %o0=start, %o1=end */
cmp %o0, %o1
be,pn %xcc, 2f
sethi %hi(PAGE_SIZE), %g3
mov %o0, %g1
sub %o1, %g1, %g2
sub %g2, %g3, %g2
1: add %g1, %g2, %o0 /* ARG0: virtual address */
mov 0, %o1 /* ARG1: mmu context */
mov HV_MMU_ALL, %o2 /* ARG2: flags */
ta HV_MMU_UNMAP_ADDR_TRAP
[SPARC64]: Bulletproof hypervisor TLB flushing. Check TLB flush hypervisor calls for errors and report them. Pass HV_MMU_ALL always for now, we can add back the optimization to avoid the I-TLB flush later. Always explicitly page align the virtual address arguments. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 03:31:49 +00:00
brnz,pn %o0, __hypervisor_tlb_tl0_error
mov HV_MMU_UNMAP_ADDR_TRAP, %o1
[SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 11:08:37 +00:00
brnz,pt %g2, 1b
sub %g2, %g3, %g2
2: retl
nop
#ifdef DCACHE_ALIASING_POSSIBLE
/* XXX Niagara and friends have an 8K cache, so no aliasing is
* XXX possible, but nothing explicit in the Hypervisor API
* XXX guarantees this.
*/
__hypervisor_flush_dcache_page: /* 2 insns */
retl
nop
#endif
tlb_patch_one:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
1: lduw [%o1], %g1
stw %g1, [%o0]
flush %o0
subcc %o2, 1, %o2
add %o1, 4, %o1
bne,pt %icc, 1b
add %o0, 4, %o0
retl
nop
.globl cheetah_patch_cachetlbops
cheetah_patch_cachetlbops:
save %sp, -128, %sp
sethi %hi(__flush_tlb_mm), %o0
or %o0, %lo(__flush_tlb_mm), %o0
sethi %hi(__cheetah_flush_tlb_mm), %o1
or %o1, %lo(__cheetah_flush_tlb_mm), %o1
[SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 11:08:37 +00:00
call tlb_patch_one
[SPARC64]: Fix bogus flush instruction usage. Some of the trap code was still assuming that alternate global %g6 was hard coded with current_thread_info(). Let's just consistently flush at KERNBASE when we need a pipeline synchronization. That's locked into the TLB and will always work. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-01 02:33:00 +00:00
mov 19, %o2
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
sethi %hi(__flush_tlb_pending), %o0
or %o0, %lo(__flush_tlb_pending), %o0
sethi %hi(__cheetah_flush_tlb_pending), %o1
or %o1, %lo(__cheetah_flush_tlb_pending), %o1
[SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 11:08:37 +00:00
call tlb_patch_one
[SPARC64]: Fix bogus flush instruction usage. Some of the trap code was still assuming that alternate global %g6 was hard coded with current_thread_info(). Let's just consistently flush at KERNBASE when we need a pipeline synchronization. That's locked into the TLB and will always work. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-01 02:33:00 +00:00
mov 27, %o2
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#ifdef DCACHE_ALIASING_POSSIBLE
sethi %hi(__flush_dcache_page), %o0
or %o0, %lo(__flush_dcache_page), %o0
[SPARC64]: Simplify Spitfire D-cache page flush. It tries to batch up the tag loads and comparisons, and then the stores. And this is just complicated instead of efficient. Also, make the symbol of the Cheetah version more grepable. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-26 23:06:03 +00:00
sethi %hi(__cheetah_flush_dcache_page), %o1
or %o1, %lo(__cheetah_flush_dcache_page), %o1
[SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 11:08:37 +00:00
call tlb_patch_one
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
mov 11, %o2
#endif /* DCACHE_ALIASING_POSSIBLE */
ret
restore
#ifdef CONFIG_SMP
/* These are all called by the slaves of a cross call, at
* trap level 1, with interrupts fully disabled.
*
* Register usage:
* %g5 mm->context (all tlb flushes)
* %g1 address arg 1 (tlb page and range flushes)
* %g7 address arg 2 (tlb range flush only)
*
[SPARC64]: Elminate all usage of hard-coded trap globals. UltraSPARC has special sets of global registers which are switched to for certain trap types. There is one set for MMU related traps, one set of Interrupt Vector processing, and another set (called the Alternate globals) for all other trap types. For what seems like forever we've hard coded the values in some of these trap registers. Some examples include: 1) Interrupt Vector global %g6 holds current processors interrupt work struct where received interrupts are managed for IRQ handler dispatch. 2) MMU global %g7 holds the base of the page tables of the currently active address space. 3) Alternate global %g6 held the current_thread_info() value. Such hardcoding has resulted in some serious issues in many areas. There are some code sequences where having another register available would help clean up the implementation. Taking traps such as cross-calls from the OBP firmware requires some trick code sequences wherein we have to save away and restore all of the special sets of global registers when we enter/exit OBP. We were also using the IMMU TSB register on SMP to hold the per-cpu area base address, which doesn't work any longer now that we actually use the TSB facility of the cpu. The implementation is pretty straight forward. One tricky bit is getting the current processor ID as that is different on different cpu variants. We use a stub with a fancy calling convention which we patch at boot time. The calling convention is that the stub is branched to and the (PC - 4) to return to is in register %g1. The cpu number is left in %g6. This stub can be invoked by using the __GET_CPUID macro. We use an array of per-cpu trap state to store the current thread and physical address of the current address space's page tables. The TRAP_LOAD_THREAD_REG loads %g6 with the current thread from this table, it uses __GET_CPUID and also clobbers %g1. TRAP_LOAD_IRQ_WORK is used by the interrupt vector processing to load the current processor's IRQ software state into %g6. It also uses __GET_CPUID and clobbers %g1. Finally, TRAP_LOAD_PGD_PHYS loads the physical address base of the current address space's page tables into %g7, it clobbers %g1 and uses __GET_CPUID. Many refinements are possible, as well as some tuning, with this stuff in place. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 07:24:22 +00:00
* %g6 scratch 1
* %g2 scratch 2
* %g3 scratch 3
* %g4 scratch 4
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
.align 32
.globl xcall_flush_tlb_mm
[SPARC64]: Bulletproof hypervisor TLB flushing. Check TLB flush hypervisor calls for errors and report them. Pass HV_MMU_ALL always for now, we can add back the optimization to avoid the I-TLB flush later. Always explicitly page align the virtual address arguments. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 03:31:49 +00:00
xcall_flush_tlb_mm: /* 21 insns */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
mov PRIMARY_CONTEXT, %g2
ldxa [%g2] ASI_DMMU, %g3
[SPARC64]: Preserve nucleus ctx page size during TLB flushes. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-31 03:21:34 +00:00
srlx %g3, CTX_PGSZ1_NUC_SHIFT, %g4
sllx %g4, CTX_PGSZ1_NUC_SHIFT, %g4
or %g5, %g4, %g5 /* Preserve nucleus page size fields */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
stxa %g5, [%g2] ASI_DMMU
[SPARC64]: Preserve nucleus ctx page size during TLB flushes. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-31 03:21:34 +00:00
mov 0x40, %g4
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
stxa %g0, [%g4] ASI_DMMU_DEMAP
stxa %g0, [%g4] ASI_IMMU_DEMAP
stxa %g3, [%g2] ASI_DMMU
retry
[SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 11:08:37 +00:00
nop
nop
nop
nop
nop
nop
nop
[SPARC64]: Bulletproof hypervisor TLB flushing. Check TLB flush hypervisor calls for errors and report them. Pass HV_MMU_ALL always for now, we can add back the optimization to avoid the I-TLB flush later. Always explicitly page align the virtual address arguments. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 03:31:49 +00:00
nop
nop
nop
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.globl xcall_flush_tlb_pending
[SPARC64]: Bulletproof hypervisor TLB flushing. Check TLB flush hypervisor calls for errors and report them. Pass HV_MMU_ALL always for now, we can add back the optimization to avoid the I-TLB flush later. Always explicitly page align the virtual address arguments. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 03:31:49 +00:00
xcall_flush_tlb_pending: /* 21 insns */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* %g5=context, %g1=nr, %g7=vaddrs[] */
sllx %g1, 3, %g1
mov PRIMARY_CONTEXT, %g4
ldxa [%g4] ASI_DMMU, %g2
[SPARC64]: Preserve nucleus ctx page size during TLB flushes. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-31 03:21:34 +00:00
srlx %g2, CTX_PGSZ1_NUC_SHIFT, %g4
sllx %g4, CTX_PGSZ1_NUC_SHIFT, %g4
or %g5, %g4, %g5
mov PRIMARY_CONTEXT, %g4
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
stxa %g5, [%g4] ASI_DMMU
1: sub %g1, (1 << 3), %g1
ldx [%g7 + %g1], %g5
andcc %g5, 0x1, %g0
be,pn %icc, 2f
andn %g5, 0x1, %g5
stxa %g0, [%g5] ASI_IMMU_DEMAP
2: stxa %g0, [%g5] ASI_DMMU_DEMAP
membar #Sync
brnz,pt %g1, 1b
nop
stxa %g2, [%g4] ASI_DMMU
retry
[SPARC64]: Bulletproof hypervisor TLB flushing. Check TLB flush hypervisor calls for errors and report them. Pass HV_MMU_ALL always for now, we can add back the optimization to avoid the I-TLB flush later. Always explicitly page align the virtual address arguments. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 03:31:49 +00:00
nop
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.globl xcall_flush_tlb_kernel_range
[SPARC64]: Bulletproof hypervisor TLB flushing. Check TLB flush hypervisor calls for errors and report them. Pass HV_MMU_ALL always for now, we can add back the optimization to avoid the I-TLB flush later. Always explicitly page align the virtual address arguments. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 03:31:49 +00:00
xcall_flush_tlb_kernel_range: /* 25 insns */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
sethi %hi(PAGE_SIZE - 1), %g2
or %g2, %lo(PAGE_SIZE - 1), %g2
andn %g1, %g2, %g1
andn %g7, %g2, %g7
sub %g7, %g1, %g3
add %g2, 1, %g2
sub %g3, %g2, %g3
or %g1, 0x20, %g1 ! Nucleus
1: stxa %g0, [%g1 + %g3] ASI_DMMU_DEMAP
stxa %g0, [%g1 + %g3] ASI_IMMU_DEMAP
membar #Sync
brnz,pt %g3, 1b
sub %g3, %g2, %g3
retry
nop
nop
[SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 11:08:37 +00:00
nop
nop
nop
nop
nop
nop
[SPARC64]: Bulletproof hypervisor TLB flushing. Check TLB flush hypervisor calls for errors and report them. Pass HV_MMU_ALL always for now, we can add back the optimization to avoid the I-TLB flush later. Always explicitly page align the virtual address arguments. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 03:31:49 +00:00
nop
nop
nop
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* This runs in a very controlled environment, so we do
* not need to worry about BH races etc.
*/
.globl xcall_sync_tick
xcall_sync_tick:
[SPARC64]: Sanitize %pstate writes for sun4v. If we're just switching between different alternate global sets, nop it out on sun4v. Also, get rid of all of the alternate global save/restore in the OBP CIF trampoline code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-06 06:27:28 +00:00
661: rdpr %pstate, %g2
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
wrpr %g2, PSTATE_IG | PSTATE_AG, %pstate
[SPARC64]: Rename gl_{1,2}insn_patch --> sun4v_{1,2}insn_patch Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-07 08:00:16 +00:00
.section .sun4v_2insn_patch, "ax"
[SPARC64]: Sanitize %pstate writes for sun4v. If we're just switching between different alternate global sets, nop it out on sun4v. Also, get rid of all of the alternate global save/restore in the OBP CIF trampoline code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-06 06:27:28 +00:00
.word 661b
nop
nop
.previous
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
rdpr %pil, %g2
wrpr %g0, 15, %pil
sethi %hi(109f), %g7
b,pt %xcc, etrap_irq
109: or %g7, %lo(109b), %g7
[SPARC64]: Add irqtrace/stacktrace/lockdep support. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-16 21:38:57 +00:00
#ifdef CONFIG_TRACE_IRQFLAGS
call trace_hardirqs_off
nop
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
call smp_synchronize_tick_client
nop
b rtrap_xcall
ldx [%sp + PTREGS_OFF + PT_V9_TSTATE], %l1
/* NOTE: This is SPECIAL!! We do etrap/rtrap however
* we choose to deal with the "BH's run with
* %pil==15" problem (described in asm/pil.h)
* by just invoking rtrap directly past where
* BH's are checked for.
*
* We do it like this because we do not want %pil==15
* lockups to prevent regs being reported.
*/
.globl xcall_report_regs
xcall_report_regs:
[SPARC64]: Sanitize %pstate writes for sun4v. If we're just switching between different alternate global sets, nop it out on sun4v. Also, get rid of all of the alternate global save/restore in the OBP CIF trampoline code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-06 06:27:28 +00:00
661: rdpr %pstate, %g2
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
wrpr %g2, PSTATE_IG | PSTATE_AG, %pstate
[SPARC64]: Rename gl_{1,2}insn_patch --> sun4v_{1,2}insn_patch Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-07 08:00:16 +00:00
.section .sun4v_2insn_patch, "ax"
[SPARC64]: Sanitize %pstate writes for sun4v. If we're just switching between different alternate global sets, nop it out on sun4v. Also, get rid of all of the alternate global save/restore in the OBP CIF trampoline code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-06 06:27:28 +00:00
.word 661b
nop
nop
.previous
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
rdpr %pil, %g2
wrpr %g0, 15, %pil
sethi %hi(109f), %g7
b,pt %xcc, etrap_irq
109: or %g7, %lo(109b), %g7
[SPARC64]: Add irqtrace/stacktrace/lockdep support. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-16 21:38:57 +00:00
#ifdef CONFIG_TRACE_IRQFLAGS
call trace_hardirqs_off
nop
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
call __show_regs
add %sp, PTREGS_OFF, %o0
/* Has to be a non-v9 branch due to the large distance. */
b rtrap_xcall
ldx [%sp + PTREGS_OFF + PT_V9_TSTATE], %l1
sparc64: Add global register dumping facility. When a cpu really is stuck in the kernel, it can be often impossible to figure out which cpu is stuck where. The worst case is when the stuck cpu has interrupts disabled. Therefore, implement a global cpu state capture that uses SMP message interrupts which are not disabled by the normal IRQ enable/disable APIs of the kernel. As long as we can get a sysrq 'y' to the kernel, we can get a dump. Even if the console interrupt cpu is wedged, we can trigger it from userspace using /proc/sysrq-trigger The output is made compact so that this facility is more useful on high cpu count systems, which is where this facility will likely find itself the most useful :) Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-20 06:46:00 +00:00
#ifdef CONFIG_MAGIC_SYSRQ
.globl xcall_fetch_glob_regs
xcall_fetch_glob_regs:
sethi %hi(global_reg_snapshot), %g1
or %g1, %lo(global_reg_snapshot), %g1
__GET_CPUID(%g2)
sllx %g2, 6, %g3
add %g1, %g3, %g1
rdpr %tstate, %g7
stx %g7, [%g1 + GR_SNAP_TSTATE]
rdpr %tpc, %g7
stx %g7, [%g1 + GR_SNAP_TPC]
rdpr %tnpc, %g7
stx %g7, [%g1 + GR_SNAP_TNPC]
stx %o7, [%g1 + GR_SNAP_O7]
stx %i7, [%g1 + GR_SNAP_I7]
sethi %hi(trap_block), %g7
or %g7, %lo(trap_block), %g7
sllx %g2, TRAP_BLOCK_SZ_SHIFT, %g2
add %g7, %g2, %g7
ldx [%g7 + TRAP_PER_CPU_THREAD], %g3
membar #StoreStore
stx %g3, [%g1 + GR_SNAP_THREAD]
retry
#endif /* CONFIG_MAGIC_SYSRQ */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#ifdef DCACHE_ALIASING_POSSIBLE
.align 32
.globl xcall_flush_dcache_page_cheetah
xcall_flush_dcache_page_cheetah: /* %g1 == physical page address */
sethi %hi(PAGE_SIZE), %g3
1: subcc %g3, (1 << 5), %g3
stxa %g0, [%g1 + %g3] ASI_DCACHE_INVALIDATE
membar #Sync
bne,pt %icc, 1b
nop
retry
nop
#endif /* DCACHE_ALIASING_POSSIBLE */
.globl xcall_flush_dcache_page_spitfire
xcall_flush_dcache_page_spitfire: /* %g1 == physical page address
%g7 == kernel page virtual address
%g5 == (page->mapping != NULL) */
#ifdef DCACHE_ALIASING_POSSIBLE
srlx %g1, (13 - 2), %g1 ! Form tag comparitor
sethi %hi(L1DCACHE_SIZE), %g3 ! D$ size == 16K
sub %g3, (1 << 5), %g3 ! D$ linesize == 32
1: ldxa [%g3] ASI_DCACHE_TAG, %g2
andcc %g2, 0x3, %g0
be,pn %xcc, 2f
andn %g2, 0x3, %g2
cmp %g2, %g1
bne,pt %xcc, 2f
nop
stxa %g0, [%g3] ASI_DCACHE_TAG
membar #Sync
2: cmp %g3, 0
bne,pt %xcc, 1b
sub %g3, (1 << 5), %g3
brz,pn %g5, 2f
#endif /* DCACHE_ALIASING_POSSIBLE */
sethi %hi(PAGE_SIZE), %g3
1: flush %g7
subcc %g3, (1 << 5), %g3
bne,pt %icc, 1b
add %g7, (1 << 5), %g7
2: retry
nop
nop
[SPARC64]: Bulletproof hypervisor TLB flushing. Check TLB flush hypervisor calls for errors and report them. Pass HV_MMU_ALL always for now, we can add back the optimization to avoid the I-TLB flush later. Always explicitly page align the virtual address arguments. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 03:31:49 +00:00
/* %g5: error
* %g6: tlb op
*/
__hypervisor_tlb_xcall_error:
mov %g5, %g4
mov %g6, %g5
ba,pt %xcc, etrap
rd %pc, %g7
mov %l4, %o0
call hypervisor_tlbop_error_xcall
mov %l5, %o1
[SPARC64]: %l6 trap return handling no longer necessary. Now that we indicate the "restart system call" in the trap type field of pt_regs->magic, we don't need to set the %l6 boolean in all of the trap return paths. And we therefore don't need to pass it to do_notify_resume(). Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-24 10:15:22 +00:00
ba,a,pt %xcc, rtrap
[SPARC64]: Bulletproof hypervisor TLB flushing. Check TLB flush hypervisor calls for errors and report them. Pass HV_MMU_ALL always for now, we can add back the optimization to avoid the I-TLB flush later. Always explicitly page align the virtual address arguments. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 03:31:49 +00:00
[SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 11:08:37 +00:00
.globl __hypervisor_xcall_flush_tlb_mm
[SPARC64]: Bulletproof hypervisor TLB flushing. Check TLB flush hypervisor calls for errors and report them. Pass HV_MMU_ALL always for now, we can add back the optimization to avoid the I-TLB flush later. Always explicitly page align the virtual address arguments. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 03:31:49 +00:00
__hypervisor_xcall_flush_tlb_mm: /* 21 insns */
[SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 11:08:37 +00:00
/* %g5=ctx, g1,g2,g3,g4,g7=scratch, %g6=unusable */
mov %o0, %g2
mov %o1, %g3
mov %o2, %g4
mov %o3, %g1
mov %o5, %g7
clr %o0 /* ARG0: CPU lists unimplemented */
clr %o1 /* ARG1: CPU lists unimplemented */
mov %g5, %o2 /* ARG2: mmu context */
mov HV_MMU_ALL, %o3 /* ARG3: flags */
mov HV_FAST_MMU_DEMAP_CTX, %o5
ta HV_FAST_TRAP
[SPARC64]: Bulletproof hypervisor TLB flushing. Check TLB flush hypervisor calls for errors and report them. Pass HV_MMU_ALL always for now, we can add back the optimization to avoid the I-TLB flush later. Always explicitly page align the virtual address arguments. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 03:31:49 +00:00
mov HV_FAST_MMU_DEMAP_CTX, %g6
brnz,pn %o0, __hypervisor_tlb_xcall_error
mov %o0, %g5
[SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 11:08:37 +00:00
mov %g2, %o0
mov %g3, %o1
mov %g4, %o2
mov %g1, %o3
mov %g7, %o5
membar #Sync
retry
.globl __hypervisor_xcall_flush_tlb_pending
[SPARC64]: Bulletproof hypervisor TLB flushing. Check TLB flush hypervisor calls for errors and report them. Pass HV_MMU_ALL always for now, we can add back the optimization to avoid the I-TLB flush later. Always explicitly page align the virtual address arguments. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 03:31:49 +00:00
__hypervisor_xcall_flush_tlb_pending: /* 21 insns */
/* %g5=ctx, %g1=nr, %g7=vaddrs[], %g2,%g3,%g4,g6=scratch */
[SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 11:08:37 +00:00
sllx %g1, 3, %g1
mov %o0, %g2
mov %o1, %g3
mov %o2, %g4
1: sub %g1, (1 << 3), %g1
ldx [%g7 + %g1], %o0 /* ARG0: virtual address */
mov %g5, %o1 /* ARG1: mmu context */
[SPARC64]: Bulletproof hypervisor TLB flushing. Check TLB flush hypervisor calls for errors and report them. Pass HV_MMU_ALL always for now, we can add back the optimization to avoid the I-TLB flush later. Always explicitly page align the virtual address arguments. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 03:31:49 +00:00
mov HV_MMU_ALL, %o2 /* ARG2: flags */
srlx %o0, PAGE_SHIFT, %o0
sllx %o0, PAGE_SHIFT, %o0
[SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 11:08:37 +00:00
ta HV_MMU_UNMAP_ADDR_TRAP
[SPARC64]: Bulletproof hypervisor TLB flushing. Check TLB flush hypervisor calls for errors and report them. Pass HV_MMU_ALL always for now, we can add back the optimization to avoid the I-TLB flush later. Always explicitly page align the virtual address arguments. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 03:31:49 +00:00
mov HV_MMU_UNMAP_ADDR_TRAP, %g6
brnz,a,pn %o0, __hypervisor_tlb_xcall_error
mov %o0, %g5
[SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 11:08:37 +00:00
brnz,pt %g1, 1b
nop
mov %g2, %o0
mov %g3, %o1
mov %g4, %o2
membar #Sync
retry
.globl __hypervisor_xcall_flush_tlb_kernel_range
[SPARC64]: Bulletproof hypervisor TLB flushing. Check TLB flush hypervisor calls for errors and report them. Pass HV_MMU_ALL always for now, we can add back the optimization to avoid the I-TLB flush later. Always explicitly page align the virtual address arguments. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 03:31:49 +00:00
__hypervisor_xcall_flush_tlb_kernel_range: /* 25 insns */
/* %g1=start, %g7=end, g2,g3,g4,g5,g6=scratch */
[SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 11:08:37 +00:00
sethi %hi(PAGE_SIZE - 1), %g2
or %g2, %lo(PAGE_SIZE - 1), %g2
andn %g1, %g2, %g1
andn %g7, %g2, %g7
sub %g7, %g1, %g3
add %g2, 1, %g2
sub %g3, %g2, %g3
mov %o0, %g2
mov %o1, %g4
[SPARC64]: Bulletproof hypervisor TLB flushing. Check TLB flush hypervisor calls for errors and report them. Pass HV_MMU_ALL always for now, we can add back the optimization to avoid the I-TLB flush later. Always explicitly page align the virtual address arguments. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 03:31:49 +00:00
mov %o2, %g7
[SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 11:08:37 +00:00
1: add %g1, %g3, %o0 /* ARG0: virtual address */
mov 0, %o1 /* ARG1: mmu context */
mov HV_MMU_ALL, %o2 /* ARG2: flags */
ta HV_MMU_UNMAP_ADDR_TRAP
[SPARC64]: Bulletproof hypervisor TLB flushing. Check TLB flush hypervisor calls for errors and report them. Pass HV_MMU_ALL always for now, we can add back the optimization to avoid the I-TLB flush later. Always explicitly page align the virtual address arguments. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 03:31:49 +00:00
mov HV_MMU_UNMAP_ADDR_TRAP, %g6
brnz,pn %o0, __hypervisor_tlb_xcall_error
mov %o0, %g5
[SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 11:08:37 +00:00
sethi %hi(PAGE_SIZE), %o2
brnz,pt %g3, 1b
sub %g3, %o2, %g3
mov %g2, %o0
mov %g4, %o1
[SPARC64]: Bulletproof hypervisor TLB flushing. Check TLB flush hypervisor calls for errors and report them. Pass HV_MMU_ALL always for now, we can add back the optimization to avoid the I-TLB flush later. Always explicitly page align the virtual address arguments. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 03:31:49 +00:00
mov %g7, %o2
[SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 11:08:37 +00:00
membar #Sync
retry
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* These just get rescheduled to PIL vectors. */
.globl xcall_call_function
xcall_call_function:
wr %g0, (1 << PIL_SMP_CALL_FUNC), %set_softint
retry
sparc64: Convert to generic helpers for IPI function calls. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-18 06:44:50 +00:00
.globl xcall_call_function_single
xcall_call_function_single:
wr %g0, (1 << PIL_SMP_CALL_FUNC_SNGL), %set_softint
retry
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
.globl xcall_receive_signal
xcall_receive_signal:
wr %g0, (1 << PIL_SMP_RECEIVE_SIGNAL), %set_softint
retry
.globl xcall_capture
xcall_capture:
wr %g0, (1 << PIL_SMP_CAPTURE), %set_softint
retry
[SPARC64]: Fix new context version SMP handling. Don't piggy back the SMP receive signal code to do the context version change handling. Instead allocate another fixed PIL number for this asynchronous cross-call. We can't use smp_call_function() because this thing is invoked with interrupts disabled and a few spinlocks held. Also, fix smp_call_function_mask() to count "cpus" correctly. There is no guarentee that the local cpu is in the mask yet that is exactly what this code was assuming. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-07 06:50:44 +00:00
.globl xcall_new_mmu_context_version
xcall_new_mmu_context_version:
wr %g0, (1 << PIL_SMP_CTX_NEW_VERSION), %set_softint
retry
sparc: Add kgdb support. Current limitations: 1) On SMP single stepping has some fundamental issues, shared with other sw single-step architectures such as mips and arm. 2) On 32-bit sparc we don't support SMP kgdb yet. That requires some reworking of the IPI mechanisms and infrastructure on that platform. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-29 09:38:50 +00:00
#ifdef CONFIG_KGDB
.globl xcall_kgdb_capture
xcall_kgdb_capture:
661: rdpr %pstate, %g2
wrpr %g2, PSTATE_IG | PSTATE_AG, %pstate
.section .sun4v_2insn_patch, "ax"
.word 661b
nop
nop
.previous
rdpr %pil, %g2
wrpr %g0, 15, %pil
sethi %hi(109f), %g7
ba,pt %xcc, etrap_irq
109: or %g7, %lo(109b), %g7
#ifdef CONFIG_TRACE_IRQFLAGS
call trace_hardirqs_off
nop
#endif
call smp_kgdb_capture_client
add %sp, PTREGS_OFF, %o0
/* Has to be a non-v9 branch due to the large distance. */
ba rtrap_xcall
ldx [%sp + PTREGS_OFF + PT_V9_TSTATE], %l1
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#endif /* CONFIG_SMP */
[SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 11:08:37 +00:00
.globl hypervisor_patch_cachetlbops
hypervisor_patch_cachetlbops:
save %sp, -128, %sp
sethi %hi(__flush_tlb_mm), %o0
or %o0, %lo(__flush_tlb_mm), %o0
sethi %hi(__hypervisor_flush_tlb_mm), %o1
or %o1, %lo(__hypervisor_flush_tlb_mm), %o1
call tlb_patch_one
[SPARC64]: Bulletproof hypervisor TLB flushing. Check TLB flush hypervisor calls for errors and report them. Pass HV_MMU_ALL always for now, we can add back the optimization to avoid the I-TLB flush later. Always explicitly page align the virtual address arguments. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 03:31:49 +00:00
mov 10, %o2
[SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 11:08:37 +00:00
sethi %hi(__flush_tlb_pending), %o0
or %o0, %lo(__flush_tlb_pending), %o0
sethi %hi(__hypervisor_flush_tlb_pending), %o1
or %o1, %lo(__hypervisor_flush_tlb_pending), %o1
call tlb_patch_one
[SPARC64]: Bulletproof hypervisor TLB flushing. Check TLB flush hypervisor calls for errors and report them. Pass HV_MMU_ALL always for now, we can add back the optimization to avoid the I-TLB flush later. Always explicitly page align the virtual address arguments. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 03:31:49 +00:00
mov 16, %o2
[SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 11:08:37 +00:00
sethi %hi(__flush_tlb_kernel_range), %o0
or %o0, %lo(__flush_tlb_kernel_range), %o0
sethi %hi(__hypervisor_flush_tlb_kernel_range), %o1
or %o1, %lo(__hypervisor_flush_tlb_kernel_range), %o1
call tlb_patch_one
[SPARC64]: Bulletproof hypervisor TLB flushing. Check TLB flush hypervisor calls for errors and report them. Pass HV_MMU_ALL always for now, we can add back the optimization to avoid the I-TLB flush later. Always explicitly page align the virtual address arguments. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 03:31:49 +00:00
mov 16, %o2
[SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 11:08:37 +00:00
#ifdef DCACHE_ALIASING_POSSIBLE
sethi %hi(__flush_dcache_page), %o0
or %o0, %lo(__flush_dcache_page), %o0
sethi %hi(__hypervisor_flush_dcache_page), %o1
or %o1, %lo(__hypervisor_flush_dcache_page), %o1
call tlb_patch_one
mov 2, %o2
#endif /* DCACHE_ALIASING_POSSIBLE */
#ifdef CONFIG_SMP
sethi %hi(xcall_flush_tlb_mm), %o0
or %o0, %lo(xcall_flush_tlb_mm), %o0
sethi %hi(__hypervisor_xcall_flush_tlb_mm), %o1
or %o1, %lo(__hypervisor_xcall_flush_tlb_mm), %o1
call tlb_patch_one
[SPARC64]: Bulletproof hypervisor TLB flushing. Check TLB flush hypervisor calls for errors and report them. Pass HV_MMU_ALL always for now, we can add back the optimization to avoid the I-TLB flush later. Always explicitly page align the virtual address arguments. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 03:31:49 +00:00
mov 21, %o2
[SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 11:08:37 +00:00
sethi %hi(xcall_flush_tlb_pending), %o0
or %o0, %lo(xcall_flush_tlb_pending), %o0
sethi %hi(__hypervisor_xcall_flush_tlb_pending), %o1
or %o1, %lo(__hypervisor_xcall_flush_tlb_pending), %o1
call tlb_patch_one
[SPARC64]: Bulletproof hypervisor TLB flushing. Check TLB flush hypervisor calls for errors and report them. Pass HV_MMU_ALL always for now, we can add back the optimization to avoid the I-TLB flush later. Always explicitly page align the virtual address arguments. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 03:31:49 +00:00
mov 21, %o2
[SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 11:08:37 +00:00
sethi %hi(xcall_flush_tlb_kernel_range), %o0
or %o0, %lo(xcall_flush_tlb_kernel_range), %o0
sethi %hi(__hypervisor_xcall_flush_tlb_kernel_range), %o1
or %o1, %lo(__hypervisor_xcall_flush_tlb_kernel_range), %o1
call tlb_patch_one
[SPARC64]: Bulletproof hypervisor TLB flushing. Check TLB flush hypervisor calls for errors and report them. Pass HV_MMU_ALL always for now, we can add back the optimization to avoid the I-TLB flush later. Always explicitly page align the virtual address arguments. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 03:31:49 +00:00
mov 25, %o2
[SPARC64]: SUN4V hypervisor TLB flush support code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 11:08:37 +00:00
#endif /* CONFIG_SMP */
ret
restore
Reference in New Issue Copy Permalink