linux/drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c

272 lines
6.7 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* NEC NL8048HL11 Panel driver
*
* Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
* Author: Erik Gilling <konkers@android.com>
* Converted to new DSS device model: Tomi Valkeinen <tomi.valkeinen@ti.com>
*/
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/spi/spi.h>
#include "../dss/omapdss.h"
struct panel_drv_data {
struct omap_dss_device dssdev;
struct videomode vm;
struct gpio_desc *res_gpio;
struct spi_device *spi;
};
#define LCD_XRES 800
#define LCD_YRES 480
/*
* NEC PIX Clock Ratings
* MIN:21.8MHz TYP:23.8MHz MAX:25.7MHz
*/
#define LCD_PIXEL_CLOCK 23800000
static const struct {
unsigned char addr;
unsigned char dat;
} nec_8048_init_seq[] = {
{ 3, 0x01 }, { 0, 0x00 }, { 1, 0x01 }, { 4, 0x00 }, { 5, 0x14 },
{ 6, 0x24 }, { 16, 0xD7 }, { 17, 0x00 }, { 18, 0x00 }, { 19, 0x55 },
{ 20, 0x01 }, { 21, 0x70 }, { 22, 0x1E }, { 23, 0x25 }, { 24, 0x25 },
{ 25, 0x02 }, { 26, 0x02 }, { 27, 0xA0 }, { 32, 0x2F }, { 33, 0x0F },
{ 34, 0x0F }, { 35, 0x0F }, { 36, 0x0F }, { 37, 0x0F }, { 38, 0x0F },
{ 39, 0x00 }, { 40, 0x02 }, { 41, 0x02 }, { 42, 0x02 }, { 43, 0x0F },
{ 44, 0x0F }, { 45, 0x0F }, { 46, 0x0F }, { 47, 0x0F }, { 48, 0x0F },
{ 49, 0x0F }, { 50, 0x00 }, { 51, 0x02 }, { 52, 0x02 }, { 53, 0x02 },
{ 80, 0x0C }, { 83, 0x42 }, { 84, 0x42 }, { 85, 0x41 }, { 86, 0x14 },
{ 89, 0x88 }, { 90, 0x01 }, { 91, 0x00 }, { 92, 0x02 }, { 93, 0x0C },
{ 94, 0x1C }, { 95, 0x27 }, { 98, 0x49 }, { 99, 0x27 }, { 102, 0x76 },
{ 103, 0x27 }, { 112, 0x01 }, { 113, 0x0E }, { 114, 0x02 },
{ 115, 0x0C }, { 118, 0x0C }, { 121, 0x30 }, { 130, 0x00 },
{ 131, 0x00 }, { 132, 0xFC }, { 134, 0x00 }, { 136, 0x00 },
{ 138, 0x00 }, { 139, 0x00 }, { 140, 0x00 }, { 141, 0xFC },
{ 143, 0x00 }, { 145, 0x00 }, { 147, 0x00 }, { 148, 0x00 },
{ 149, 0x00 }, { 150, 0xFC }, { 152, 0x00 }, { 154, 0x00 },
{ 156, 0x00 }, { 157, 0x00 }, { 2, 0x00 },
};
static const struct videomode nec_8048_panel_vm = {
.hactive = LCD_XRES,
.vactive = LCD_YRES,
.pixelclock = LCD_PIXEL_CLOCK,
.hfront_porch = 6,
.hsync_len = 1,
.hback_porch = 4,
.vfront_porch = 3,
.vsync_len = 1,
.vback_porch = 4,
drm/omap: Store bus flags in the omap_dss_device structure Source components in the display pipeline need to configure their output signals polarities and clock driving edge based on the requirements of the sink component. Those requirements are currently shared across the whole pipeline in the flags of a videomode structure, instead of being local to each bus. This both prevents multiple buses from having different configurations (when the hardware supports it), and makes it difficult to move from videomode to drm_display_mode as the latter doesn't contain bus polarities and clock edge flags. Add a bus_flags field to the omap_dss_device structure and move the DISPLAY_FLAGS_DE_(LOW|HIGH), DISPLAY_FLAGS_PIXDATA_(POS|NEG)EDGE and DISPLAY_FLAGS_SYNC_(POS|NEG)EDGE videomode flags to bus_flags in all external encoders, connectors and panels. The videomode flags are still used internally for internal encoders, this will be addressed in a second step. The related videomode flags in the default mode of the DVI connector can simply be dropped, as they are always overridden by the TFP410 driver. Note that this results in both the DISPLAY_FLAGS_SYNC_POSEDGE and DISPLAY_FLAGS_SYNC_NEGEDGE flags being set, which is invalid, but only the former is tested for when programming the DISPC, so the DVI connector flags are effectively overridden by the TFP410 flags. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2018-06-06 12:20:01 +00:00
.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW,
};
#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
static int nec_8048_spi_send(struct spi_device *spi, unsigned char reg_addr,
unsigned char reg_data)
{
int ret = 0;
unsigned int cmd = 0, data = 0;
cmd = 0x0000 | reg_addr; /* register address write */
data = 0x0100 | reg_data; /* register data write */
data = (cmd << 16) | data;
ret = spi_write(spi, (unsigned char *)&data, 4);
if (ret)
pr_err("error in spi_write %x\n", data);
return ret;
}
static int init_nec_8048_wvga_lcd(struct spi_device *spi)
{
unsigned int i;
/* Initialization Sequence */
/* nec_8048_spi_send(spi, REG, VAL) */
for (i = 0; i < (ARRAY_SIZE(nec_8048_init_seq) - 1); i++)
nec_8048_spi_send(spi, nec_8048_init_seq[i].addr,
nec_8048_init_seq[i].dat);
udelay(20);
nec_8048_spi_send(spi, nec_8048_init_seq[i].addr,
nec_8048_init_seq[i].dat);
return 0;
}
static int nec_8048_connect(struct omap_dss_device *src,
struct omap_dss_device *dst)
{
return 0;
}
static void nec_8048_disconnect(struct omap_dss_device *src,
struct omap_dss_device *dst)
{
}
static void nec_8048_enable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
gpiod_set_value_cansleep(ddata->res_gpio, 1);
}
static void nec_8048_disable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
gpiod_set_value_cansleep(ddata->res_gpio, 0);
}
static int nec_8048_get_modes(struct omap_dss_device *dssdev,
struct drm_connector *connector)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
return omapdss_display_get_modes(connector, &ddata->vm);
}
static const struct omap_dss_device_ops nec_8048_ops = {
.connect = nec_8048_connect,
.disconnect = nec_8048_disconnect,
.enable = nec_8048_enable,
.disable = nec_8048_disable,
.get_modes = nec_8048_get_modes,
};
static int nec_8048_probe(struct spi_device *spi)
{
struct panel_drv_data *ddata;
struct omap_dss_device *dssdev;
struct gpio_desc *gpio;
int r;
dev_dbg(&spi->dev, "%s\n", __func__);
spi->mode = SPI_MODE_0;
spi->bits_per_word = 32;
r = spi_setup(spi);
if (r < 0) {
dev_err(&spi->dev, "spi_setup failed: %d\n", r);
return r;
}
init_nec_8048_wvga_lcd(spi);
ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
if (ddata == NULL)
return -ENOMEM;
dev_set_drvdata(&spi->dev, ddata);
ddata->spi = spi;
gpio = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(gpio)) {
dev_err(&spi->dev, "failed to get reset gpio\n");
return PTR_ERR(gpio);
}
ddata->res_gpio = gpio;
ddata->vm = nec_8048_panel_vm;
dssdev = &ddata->dssdev;
dssdev->dev = &spi->dev;
dssdev->ops = &nec_8048_ops;
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
dssdev->display = true;
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(0);
dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
| DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE
| DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE;
omapdss_display_init(dssdev);
omapdss_device_register(dssdev);
return 0;
}
static int nec_8048_remove(struct spi_device *spi)
{
struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
struct omap_dss_device *dssdev = &ddata->dssdev;
dev_dbg(&ddata->spi->dev, "%s\n", __func__);
omapdss_device_unregister(dssdev);
nec_8048_disable(dssdev);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int nec_8048_suspend(struct device *dev)
{
struct spi_device *spi = to_spi_device(dev);
nec_8048_spi_send(spi, 2, 0x01);
mdelay(40);
return 0;
}
static int nec_8048_resume(struct device *dev)
{
struct spi_device *spi = to_spi_device(dev);
/* reinitialize the panel */
spi_setup(spi);
nec_8048_spi_send(spi, 2, 0x00);
init_nec_8048_wvga_lcd(spi);
return 0;
}
static SIMPLE_DEV_PM_OPS(nec_8048_pm_ops, nec_8048_suspend,
nec_8048_resume);
#define NEC_8048_PM_OPS (&nec_8048_pm_ops)
#else
#define NEC_8048_PM_OPS NULL
#endif
static const struct of_device_id nec_8048_of_match[] = {
{ .compatible = "omapdss,nec,nl8048hl11", },
{},
};
MODULE_DEVICE_TABLE(of, nec_8048_of_match);
static struct spi_driver nec_8048_driver = {
.driver = {
.name = "panel-nec-nl8048hl11",
.pm = NEC_8048_PM_OPS,
.of_match_table = nec_8048_of_match,
.suppress_bind_attrs = true,
},
.probe = nec_8048_probe,
.remove = nec_8048_remove,
};
module_spi_driver(nec_8048_driver);
MODULE_ALIAS("spi:nec,nl8048hl11");
MODULE_AUTHOR("Erik Gilling <konkers@android.com>");
MODULE_DESCRIPTION("NEC-NL8048HL11 Driver");
MODULE_LICENSE("GPL");