drivers/ntb/hw/Kconfig

# SPDX-License-Identifier: GPL-2.0-only
source "drivers/ntb/hw/amd/Kconfig"
source "drivers/ntb/hw/idt/Kconfig"
source "drivers/ntb/hw/intel/Kconfig"
source "drivers/ntb/hw/epf/Kconfig"
source "drivers/ntb/hw/mscc/Kconfig"
treewide: Add SPDX license identifier - Makefile/Kconfig Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2019-05-19 13:07:45 +01:00			`# SPDX-License-Identifier: GPL-2.0-only`
NTB: Add support for AMD PCI-Express Non-Transparent Bridge This adds support for AMD's PCI-Express Non-Transparent Bridge (NTB) device on the Zeppelin platform. The driver connnects to the standard NTB sub-system interface, with modification to add hooks for power management in a separate patch. The AMD NTB device has 3 memory windows, 16 doorbell, 16 scratch-pad registers, and supports up to 16 PCIe lanes running a Gen3 speeds. Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com> Reviewed-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> 2016-01-21 19:47:05 +08:00			`source "drivers/ntb/hw/amd/Kconfig"`
NTB: Add IDT 89HPESxNTx PCIe-switches support IDT 89HPESxNTx device series is PCIe-switches, which support Non-Transparent bridging between domains connected to the device ports. Since new NTB API exposes multi-port interface and messaging API, the IDT NT-functions can be now supported in the kernel. This driver adds the following functionality: 1) Multi-port NTB API to have information of possible NT-functions activated in compliance with available device ports. 2) Memory windows of direct and look up table based address translation with all possible combinations of BARs setup. 3) Traditional doorbell NTB API. 4) One-on-one messaging NTB API. There are some IDT PCIe-switch setups, which must be done before any of the NTB peers started. It can be performed either by system BIOS via IDT SMBus-slave interface or by pre-initialized IDT PCIe-switch EEPROM: 1) NT-functions of corresponding ports must be activated using SWPARTxCTL and SWPORTxCTL registers. 2) BAR0 must be configured to expose NT-function configuration registers map. 3) The rest of the BARs must have at least one memory window configured, otherwise the driver will just return an error. Temperature sensor of IDT PCIe-switches can be also optionally activated by BIOS or EEPROM. (See IDT documentations for details of how the pre-initialization can be done) Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Acked-by: Allen Hubbe <Allen.Hubbe@dell.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> 2017-04-12 15:44:45 +03:00			`source "drivers/ntb/hw/idt/Kconfig"`
NTB: Split ntb_hw_intel and ntb_transport drivers Change ntb_hw_intel to use the new NTB hardware abstraction layer. Split ntb_transport into its own driver. Change it to use the new NTB hardware abstraction layer. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> 2015-04-09 10:33:20 -04:00			`source "drivers/ntb/hw/intel/Kconfig"`
NTB: Add support for EPF PCI Non-Transparent Bridge Add support for EPF PCI Non-Transparent Bridge (NTB) devices. This driver is platform independent and may be used by any platform that has multiple PCI endpoint instances configured using the pci-epf-ntb driver. The driver connnects to the standard NTB subsystem interface. The EPF NTB device has a configurable number of memory windows (max 4), a configurable number of doorbells (max 32), and a configurable number of scratch-pad registers. Link: https://lore.kernel.org/r/20210201195809.7342-16-kishon@ti.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> 2021-02-02 01:28:07 +05:30			`source "drivers/ntb/hw/epf/Kconfig"`
NTB: switchtec_ntb: Introduce initial NTB driver Seeing the Switchtec NTB hardware shares the same endpoint as the management endpoint we utilize the class_interface API to register an NTB driver for every Switchtec device in the system that has the NTB class code. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Stephen Bates <sbates@raithlin.com> Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Acked-by: Allen Hubbe <Allen.Hubbe@dell.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> 2017-08-03 12:19:46 -06:00			`source "drivers/ntb/hw/mscc/Kconfig"`