Files
linux/drivers/net/wireless/ath/ath11k/pcic.c

734 lines
18 KiB
C
Raw Normal View History

// SPDX-License-Identifier: BSD-3-Clause-Clear
/*
* Copyright (c) 2019-2021 The Linux Foundation. All rights reserved.
* Copyright (c) 2021-2022, Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include "core.h"
#include "pcic.h"
#include "debug.h"
static const char *irq_name[ATH11K_IRQ_NUM_MAX] = {
"bhi",
"mhi-er0",
"mhi-er1",
"ce0",
"ce1",
"ce2",
"ce3",
"ce4",
"ce5",
"ce6",
"ce7",
"ce8",
"ce9",
"ce10",
"ce11",
"host2wbm-desc-feed",
"host2reo-re-injection",
"host2reo-command",
"host2rxdma-monitor-ring3",
"host2rxdma-monitor-ring2",
"host2rxdma-monitor-ring1",
"reo2ost-exception",
"wbm2host-rx-release",
"reo2host-status",
"reo2host-destination-ring4",
"reo2host-destination-ring3",
"reo2host-destination-ring2",
"reo2host-destination-ring1",
"rxdma2host-monitor-destination-mac3",
"rxdma2host-monitor-destination-mac2",
"rxdma2host-monitor-destination-mac1",
"ppdu-end-interrupts-mac3",
"ppdu-end-interrupts-mac2",
"ppdu-end-interrupts-mac1",
"rxdma2host-monitor-status-ring-mac3",
"rxdma2host-monitor-status-ring-mac2",
"rxdma2host-monitor-status-ring-mac1",
"host2rxdma-host-buf-ring-mac3",
"host2rxdma-host-buf-ring-mac2",
"host2rxdma-host-buf-ring-mac1",
"rxdma2host-destination-ring-mac3",
"rxdma2host-destination-ring-mac2",
"rxdma2host-destination-ring-mac1",
"host2tcl-input-ring4",
"host2tcl-input-ring3",
"host2tcl-input-ring2",
"host2tcl-input-ring1",
"wbm2host-tx-completions-ring3",
"wbm2host-tx-completions-ring2",
"wbm2host-tx-completions-ring1",
"tcl2host-status-ring",
};
static const struct ath11k_msi_config ath11k_msi_config[] = {
{
.total_vectors = 32,
.total_users = 4,
.users = (struct ath11k_msi_user[]) {
{ .name = "MHI", .num_vectors = 3, .base_vector = 0 },
{ .name = "CE", .num_vectors = 10, .base_vector = 3 },
{ .name = "WAKE", .num_vectors = 1, .base_vector = 13 },
{ .name = "DP", .num_vectors = 18, .base_vector = 14 },
},
.hw_rev = ATH11K_HW_QCA6390_HW20,
},
{
.total_vectors = 16,
.total_users = 3,
.users = (struct ath11k_msi_user[]) {
{ .name = "MHI", .num_vectors = 3, .base_vector = 0 },
{ .name = "CE", .num_vectors = 5, .base_vector = 3 },
{ .name = "DP", .num_vectors = 8, .base_vector = 8 },
},
.hw_rev = ATH11K_HW_QCN9074_HW10,
},
{
.total_vectors = 32,
.total_users = 4,
.users = (struct ath11k_msi_user[]) {
{ .name = "MHI", .num_vectors = 3, .base_vector = 0 },
{ .name = "CE", .num_vectors = 10, .base_vector = 3 },
{ .name = "WAKE", .num_vectors = 1, .base_vector = 13 },
{ .name = "DP", .num_vectors = 18, .base_vector = 14 },
},
.hw_rev = ATH11K_HW_WCN6855_HW20,
},
{
.total_vectors = 32,
.total_users = 4,
.users = (struct ath11k_msi_user[]) {
{ .name = "MHI", .num_vectors = 3, .base_vector = 0 },
{ .name = "CE", .num_vectors = 10, .base_vector = 3 },
{ .name = "WAKE", .num_vectors = 1, .base_vector = 13 },
{ .name = "DP", .num_vectors = 18, .base_vector = 14 },
},
.hw_rev = ATH11K_HW_WCN6855_HW21,
},
ath11k: Add support for WCN6750 device WCN6750 is non-DBS 2x2 11AX chipset. Unlike QCA6390 which is a DBS (dual band simultaneous) solution (2 LMACs), WCN6750 has a single LMAC supporting 2G, 5G and 6G bands but will operate only on one band at any given point. WCN6750 is a PCIe based solution, but it is attached to the WPSS (Wireless Processor SubSystem) Q6 processor, hence it is enumerated by the Q6 processor. It is registered to the APSS processor (Application Processor SubSystem) as a platform device(AHB) and remoteproc APIs are used to boot up or shutdown the device like other AHB devices. Also, Device information like BAR and it's size is not known to the APSS processor as the chip is enumerated by WPSS Q6. These details are fetched over QMI. STA and AP modes are supported. Verified basic connectivity and ping in both the modes. An important point to note is that though WCN6750 is a PCIe device, it cannot be attached to any other platform except on Qualcomm Snapdragon SoCs due to the aforementioned reasons. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220429170502.20080-10-quic_mpubbise@quicinc.com
2022-04-29 22:35:02 +05:30
{
.total_vectors = 28,
.total_users = 2,
.users = (struct ath11k_msi_user[]) {
{ .name = "CE", .num_vectors = 10, .base_vector = 0 },
{ .name = "DP", .num_vectors = 18, .base_vector = 10 },
},
.hw_rev = ATH11K_HW_WCN6750_HW10,
},
};
int ath11k_pcic_init_msi_config(struct ath11k_base *ab)
{
const struct ath11k_msi_config *msi_config;
int i;
for (i = 0; i < ARRAY_SIZE(ath11k_msi_config); i++) {
msi_config = &ath11k_msi_config[i];
if (msi_config->hw_rev == ab->hw_rev)
break;
}
if (i == ARRAY_SIZE(ath11k_msi_config)) {
ath11k_err(ab, "failed to fetch msi config, unsupported hw version: 0x%x\n",
ab->hw_rev);
return -EINVAL;
}
ab->pci.msi.config = msi_config;
return 0;
}
EXPORT_SYMBOL(ath11k_pcic_init_msi_config);
void ath11k_pcic_write32(struct ath11k_base *ab, u32 offset, u32 value)
{
int ret = 0;
/* for offset beyond BAR + 4K - 32, may
* need to wakeup the device to access.
*/
if (test_bit(ATH11K_FLAG_DEVICE_INIT_DONE, &ab->dev_flags) &&
offset >= ATH11K_PCI_ACCESS_ALWAYS_OFF && ab->pci.ops->wakeup)
ret = ab->pci.ops->wakeup(ab);
wifi: ath11k: Fix register write failure on QCN9074 Commit 56c8ccf331bd ("ath11k: Add register access logic for WCN6750") regressed QCN9074. With the above mentioned commit, writes are failing for some registers on QCN9074 although the device seems to work normally. ath11k_pci 0000:03:00.0: failed to set pcie link register0x01e0e0a8: 0xffffffff != 0x00000010 ath11k_pci 0000:03:00.0: failed to set sysclk: -110 PCIe devices in ath11k (QCA6390, WCN6855, QCN9074, WCN6750) use window concept for register accesses. There are two schemes, dynamic & static window. In dynamic window scheme, a single window(region in the BAR) is mapped either to CE or DP register windows at any give time. QCA6390 & WCN6855 follow this scheme for register accesses. In static window scheme, CE & DP register windows are statically mapped to separate regions with in the BAR so that there is no switching of register windows between CE & DP register accesses. QCN9074 & WCN6750 follow this scheme although the window start offsets are different for QCN9074 & WCN6750. QCN9074 uses 3rd & 2nd window for DP & CE register accesses respectively whereas WCN6750 uses 1st & 2nd window for DP & CE. In QCN9074, along with 2nd & 3rd windows, 1st window is also used for certain configurations which commit 56c8ccf331bd ("ath11k: Add register access logic for WCN6750") did not account for and hence the regression. Fix this by going back to the original way of accessing the registers on QCN9074. Since this diverges from WCN6750 way of accessing registers, it is required to register window_read32/window_write32() pci_ops for WCN6750. We can also get rid of dp_window_idx & ce_window_idx members in hw_params, so remove them. Also add a new API ath11k_pcic_register_pci_ops() for registering pci_ops to the ath11k core. This API checks for mandatory pci_ops() and reports error if those are missing. Also initialize unused pci_ops to NULL. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1 Fixes: 56c8ccf331bd ("ath11k: Add register access logic for WCN6750") Reported-by: Maxime Bizon <mbizon@freebox.fr> Tested-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220608062954.27792-1-quic_mpubbise@quicinc.com
2022-07-25 20:49:10 +03:00
if (offset < ATH11K_PCI_WINDOW_START)
iowrite32(value, ab->mem + offset);
wifi: ath11k: Fix register write failure on QCN9074 Commit 56c8ccf331bd ("ath11k: Add register access logic for WCN6750") regressed QCN9074. With the above mentioned commit, writes are failing for some registers on QCN9074 although the device seems to work normally. ath11k_pci 0000:03:00.0: failed to set pcie link register0x01e0e0a8: 0xffffffff != 0x00000010 ath11k_pci 0000:03:00.0: failed to set sysclk: -110 PCIe devices in ath11k (QCA6390, WCN6855, QCN9074, WCN6750) use window concept for register accesses. There are two schemes, dynamic & static window. In dynamic window scheme, a single window(region in the BAR) is mapped either to CE or DP register windows at any give time. QCA6390 & WCN6855 follow this scheme for register accesses. In static window scheme, CE & DP register windows are statically mapped to separate regions with in the BAR so that there is no switching of register windows between CE & DP register accesses. QCN9074 & WCN6750 follow this scheme although the window start offsets are different for QCN9074 & WCN6750. QCN9074 uses 3rd & 2nd window for DP & CE register accesses respectively whereas WCN6750 uses 1st & 2nd window for DP & CE. In QCN9074, along with 2nd & 3rd windows, 1st window is also used for certain configurations which commit 56c8ccf331bd ("ath11k: Add register access logic for WCN6750") did not account for and hence the regression. Fix this by going back to the original way of accessing the registers on QCN9074. Since this diverges from WCN6750 way of accessing registers, it is required to register window_read32/window_write32() pci_ops for WCN6750. We can also get rid of dp_window_idx & ce_window_idx members in hw_params, so remove them. Also add a new API ath11k_pcic_register_pci_ops() for registering pci_ops to the ath11k core. This API checks for mandatory pci_ops() and reports error if those are missing. Also initialize unused pci_ops to NULL. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1 Fixes: 56c8ccf331bd ("ath11k: Add register access logic for WCN6750") Reported-by: Maxime Bizon <mbizon@freebox.fr> Tested-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220608062954.27792-1-quic_mpubbise@quicinc.com
2022-07-25 20:49:10 +03:00
else
ab->pci.ops->window_write32(ab, offset, value);
if (test_bit(ATH11K_FLAG_DEVICE_INIT_DONE, &ab->dev_flags) &&
offset >= ATH11K_PCI_ACCESS_ALWAYS_OFF && ab->pci.ops->release &&
!ret)
ab->pci.ops->release(ab);
}
ath11k: Add support for WCN6750 device WCN6750 is non-DBS 2x2 11AX chipset. Unlike QCA6390 which is a DBS (dual band simultaneous) solution (2 LMACs), WCN6750 has a single LMAC supporting 2G, 5G and 6G bands but will operate only on one band at any given point. WCN6750 is a PCIe based solution, but it is attached to the WPSS (Wireless Processor SubSystem) Q6 processor, hence it is enumerated by the Q6 processor. It is registered to the APSS processor (Application Processor SubSystem) as a platform device(AHB) and remoteproc APIs are used to boot up or shutdown the device like other AHB devices. Also, Device information like BAR and it's size is not known to the APSS processor as the chip is enumerated by WPSS Q6. These details are fetched over QMI. STA and AP modes are supported. Verified basic connectivity and ping in both the modes. An important point to note is that though WCN6750 is a PCIe device, it cannot be attached to any other platform except on Qualcomm Snapdragon SoCs due to the aforementioned reasons. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220429170502.20080-10-quic_mpubbise@quicinc.com
2022-04-29 22:35:02 +05:30
EXPORT_SYMBOL(ath11k_pcic_write32);
u32 ath11k_pcic_read32(struct ath11k_base *ab, u32 offset)
{
int ret = 0;
wifi: ath11k: Fix register write failure on QCN9074 Commit 56c8ccf331bd ("ath11k: Add register access logic for WCN6750") regressed QCN9074. With the above mentioned commit, writes are failing for some registers on QCN9074 although the device seems to work normally. ath11k_pci 0000:03:00.0: failed to set pcie link register0x01e0e0a8: 0xffffffff != 0x00000010 ath11k_pci 0000:03:00.0: failed to set sysclk: -110 PCIe devices in ath11k (QCA6390, WCN6855, QCN9074, WCN6750) use window concept for register accesses. There are two schemes, dynamic & static window. In dynamic window scheme, a single window(region in the BAR) is mapped either to CE or DP register windows at any give time. QCA6390 & WCN6855 follow this scheme for register accesses. In static window scheme, CE & DP register windows are statically mapped to separate regions with in the BAR so that there is no switching of register windows between CE & DP register accesses. QCN9074 & WCN6750 follow this scheme although the window start offsets are different for QCN9074 & WCN6750. QCN9074 uses 3rd & 2nd window for DP & CE register accesses respectively whereas WCN6750 uses 1st & 2nd window for DP & CE. In QCN9074, along with 2nd & 3rd windows, 1st window is also used for certain configurations which commit 56c8ccf331bd ("ath11k: Add register access logic for WCN6750") did not account for and hence the regression. Fix this by going back to the original way of accessing the registers on QCN9074. Since this diverges from WCN6750 way of accessing registers, it is required to register window_read32/window_write32() pci_ops for WCN6750. We can also get rid of dp_window_idx & ce_window_idx members in hw_params, so remove them. Also add a new API ath11k_pcic_register_pci_ops() for registering pci_ops to the ath11k core. This API checks for mandatory pci_ops() and reports error if those are missing. Also initialize unused pci_ops to NULL. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1 Fixes: 56c8ccf331bd ("ath11k: Add register access logic for WCN6750") Reported-by: Maxime Bizon <mbizon@freebox.fr> Tested-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220608062954.27792-1-quic_mpubbise@quicinc.com
2022-07-25 20:49:10 +03:00
u32 val;
/* for offset beyond BAR + 4K - 32, may
* need to wakeup the device to access.
*/
if (test_bit(ATH11K_FLAG_DEVICE_INIT_DONE, &ab->dev_flags) &&
offset >= ATH11K_PCI_ACCESS_ALWAYS_OFF && ab->pci.ops->wakeup)
ret = ab->pci.ops->wakeup(ab);
wifi: ath11k: Fix register write failure on QCN9074 Commit 56c8ccf331bd ("ath11k: Add register access logic for WCN6750") regressed QCN9074. With the above mentioned commit, writes are failing for some registers on QCN9074 although the device seems to work normally. ath11k_pci 0000:03:00.0: failed to set pcie link register0x01e0e0a8: 0xffffffff != 0x00000010 ath11k_pci 0000:03:00.0: failed to set sysclk: -110 PCIe devices in ath11k (QCA6390, WCN6855, QCN9074, WCN6750) use window concept for register accesses. There are two schemes, dynamic & static window. In dynamic window scheme, a single window(region in the BAR) is mapped either to CE or DP register windows at any give time. QCA6390 & WCN6855 follow this scheme for register accesses. In static window scheme, CE & DP register windows are statically mapped to separate regions with in the BAR so that there is no switching of register windows between CE & DP register accesses. QCN9074 & WCN6750 follow this scheme although the window start offsets are different for QCN9074 & WCN6750. QCN9074 uses 3rd & 2nd window for DP & CE register accesses respectively whereas WCN6750 uses 1st & 2nd window for DP & CE. In QCN9074, along with 2nd & 3rd windows, 1st window is also used for certain configurations which commit 56c8ccf331bd ("ath11k: Add register access logic for WCN6750") did not account for and hence the regression. Fix this by going back to the original way of accessing the registers on QCN9074. Since this diverges from WCN6750 way of accessing registers, it is required to register window_read32/window_write32() pci_ops for WCN6750. We can also get rid of dp_window_idx & ce_window_idx members in hw_params, so remove them. Also add a new API ath11k_pcic_register_pci_ops() for registering pci_ops to the ath11k core. This API checks for mandatory pci_ops() and reports error if those are missing. Also initialize unused pci_ops to NULL. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1 Fixes: 56c8ccf331bd ("ath11k: Add register access logic for WCN6750") Reported-by: Maxime Bizon <mbizon@freebox.fr> Tested-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220608062954.27792-1-quic_mpubbise@quicinc.com
2022-07-25 20:49:10 +03:00
if (offset < ATH11K_PCI_WINDOW_START)
val = ioread32(ab->mem + offset);
wifi: ath11k: Fix register write failure on QCN9074 Commit 56c8ccf331bd ("ath11k: Add register access logic for WCN6750") regressed QCN9074. With the above mentioned commit, writes are failing for some registers on QCN9074 although the device seems to work normally. ath11k_pci 0000:03:00.0: failed to set pcie link register0x01e0e0a8: 0xffffffff != 0x00000010 ath11k_pci 0000:03:00.0: failed to set sysclk: -110 PCIe devices in ath11k (QCA6390, WCN6855, QCN9074, WCN6750) use window concept for register accesses. There are two schemes, dynamic & static window. In dynamic window scheme, a single window(region in the BAR) is mapped either to CE or DP register windows at any give time. QCA6390 & WCN6855 follow this scheme for register accesses. In static window scheme, CE & DP register windows are statically mapped to separate regions with in the BAR so that there is no switching of register windows between CE & DP register accesses. QCN9074 & WCN6750 follow this scheme although the window start offsets are different for QCN9074 & WCN6750. QCN9074 uses 3rd & 2nd window for DP & CE register accesses respectively whereas WCN6750 uses 1st & 2nd window for DP & CE. In QCN9074, along with 2nd & 3rd windows, 1st window is also used for certain configurations which commit 56c8ccf331bd ("ath11k: Add register access logic for WCN6750") did not account for and hence the regression. Fix this by going back to the original way of accessing the registers on QCN9074. Since this diverges from WCN6750 way of accessing registers, it is required to register window_read32/window_write32() pci_ops for WCN6750. We can also get rid of dp_window_idx & ce_window_idx members in hw_params, so remove them. Also add a new API ath11k_pcic_register_pci_ops() for registering pci_ops to the ath11k core. This API checks for mandatory pci_ops() and reports error if those are missing. Also initialize unused pci_ops to NULL. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1 Fixes: 56c8ccf331bd ("ath11k: Add register access logic for WCN6750") Reported-by: Maxime Bizon <mbizon@freebox.fr> Tested-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220608062954.27792-1-quic_mpubbise@quicinc.com
2022-07-25 20:49:10 +03:00
else
val = ab->pci.ops->window_read32(ab, offset);
if (test_bit(ATH11K_FLAG_DEVICE_INIT_DONE, &ab->dev_flags) &&
offset >= ATH11K_PCI_ACCESS_ALWAYS_OFF && ab->pci.ops->release &&
!ret)
ab->pci.ops->release(ab);
return val;
}
ath11k: Add support for WCN6750 device WCN6750 is non-DBS 2x2 11AX chipset. Unlike QCA6390 which is a DBS (dual band simultaneous) solution (2 LMACs), WCN6750 has a single LMAC supporting 2G, 5G and 6G bands but will operate only on one band at any given point. WCN6750 is a PCIe based solution, but it is attached to the WPSS (Wireless Processor SubSystem) Q6 processor, hence it is enumerated by the Q6 processor. It is registered to the APSS processor (Application Processor SubSystem) as a platform device(AHB) and remoteproc APIs are used to boot up or shutdown the device like other AHB devices. Also, Device information like BAR and it's size is not known to the APSS processor as the chip is enumerated by WPSS Q6. These details are fetched over QMI. STA and AP modes are supported. Verified basic connectivity and ping in both the modes. An important point to note is that though WCN6750 is a PCIe device, it cannot be attached to any other platform except on Qualcomm Snapdragon SoCs due to the aforementioned reasons. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220429170502.20080-10-quic_mpubbise@quicinc.com
2022-04-29 22:35:02 +05:30
EXPORT_SYMBOL(ath11k_pcic_read32);
void ath11k_pcic_get_msi_address(struct ath11k_base *ab, u32 *msi_addr_lo,
u32 *msi_addr_hi)
{
*msi_addr_lo = ab->pci.msi.addr_lo;
*msi_addr_hi = ab->pci.msi.addr_hi;
}
ath11k: Add support for WCN6750 device WCN6750 is non-DBS 2x2 11AX chipset. Unlike QCA6390 which is a DBS (dual band simultaneous) solution (2 LMACs), WCN6750 has a single LMAC supporting 2G, 5G and 6G bands but will operate only on one band at any given point. WCN6750 is a PCIe based solution, but it is attached to the WPSS (Wireless Processor SubSystem) Q6 processor, hence it is enumerated by the Q6 processor. It is registered to the APSS processor (Application Processor SubSystem) as a platform device(AHB) and remoteproc APIs are used to boot up or shutdown the device like other AHB devices. Also, Device information like BAR and it's size is not known to the APSS processor as the chip is enumerated by WPSS Q6. These details are fetched over QMI. STA and AP modes are supported. Verified basic connectivity and ping in both the modes. An important point to note is that though WCN6750 is a PCIe device, it cannot be attached to any other platform except on Qualcomm Snapdragon SoCs due to the aforementioned reasons. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220429170502.20080-10-quic_mpubbise@quicinc.com
2022-04-29 22:35:02 +05:30
EXPORT_SYMBOL(ath11k_pcic_get_msi_address);
int ath11k_pcic_get_user_msi_assignment(struct ath11k_base *ab, char *user_name,
int *num_vectors, u32 *user_base_data,
u32 *base_vector)
{
const struct ath11k_msi_config *msi_config = ab->pci.msi.config;
int idx;
for (idx = 0; idx < msi_config->total_users; idx++) {
if (strcmp(user_name, msi_config->users[idx].name) == 0) {
*num_vectors = msi_config->users[idx].num_vectors;
*base_vector = msi_config->users[idx].base_vector;
*user_base_data = *base_vector + ab->pci.msi.ep_base_data;
ath11k_dbg(ab, ATH11K_DBG_PCI,
"Assign MSI to user: %s, num_vectors: %d, user_base_data: %u, base_vector: %u\n",
user_name, *num_vectors, *user_base_data,
*base_vector);
return 0;
}
}
ath11k_err(ab, "Failed to find MSI assignment for %s!\n", user_name);
return -EINVAL;
}
ath11k: Add support for WCN6750 device WCN6750 is non-DBS 2x2 11AX chipset. Unlike QCA6390 which is a DBS (dual band simultaneous) solution (2 LMACs), WCN6750 has a single LMAC supporting 2G, 5G and 6G bands but will operate only on one band at any given point. WCN6750 is a PCIe based solution, but it is attached to the WPSS (Wireless Processor SubSystem) Q6 processor, hence it is enumerated by the Q6 processor. It is registered to the APSS processor (Application Processor SubSystem) as a platform device(AHB) and remoteproc APIs are used to boot up or shutdown the device like other AHB devices. Also, Device information like BAR and it's size is not known to the APSS processor as the chip is enumerated by WPSS Q6. These details are fetched over QMI. STA and AP modes are supported. Verified basic connectivity and ping in both the modes. An important point to note is that though WCN6750 is a PCIe device, it cannot be attached to any other platform except on Qualcomm Snapdragon SoCs due to the aforementioned reasons. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220429170502.20080-10-quic_mpubbise@quicinc.com
2022-04-29 22:35:02 +05:30
EXPORT_SYMBOL(ath11k_pcic_get_user_msi_assignment);
void ath11k_pcic_get_ce_msi_idx(struct ath11k_base *ab, u32 ce_id, u32 *msi_idx)
{
u32 i, msi_data_idx;
for (i = 0, msi_data_idx = 0; i < ab->hw_params.ce_count; i++) {
if (ath11k_ce_get_attr_flags(ab, i) & CE_ATTR_DIS_INTR)
continue;
if (ce_id == i)
break;
msi_data_idx++;
}
*msi_idx = msi_data_idx;
}
ath11k: Add support for WCN6750 device WCN6750 is non-DBS 2x2 11AX chipset. Unlike QCA6390 which is a DBS (dual band simultaneous) solution (2 LMACs), WCN6750 has a single LMAC supporting 2G, 5G and 6G bands but will operate only on one band at any given point. WCN6750 is a PCIe based solution, but it is attached to the WPSS (Wireless Processor SubSystem) Q6 processor, hence it is enumerated by the Q6 processor. It is registered to the APSS processor (Application Processor SubSystem) as a platform device(AHB) and remoteproc APIs are used to boot up or shutdown the device like other AHB devices. Also, Device information like BAR and it's size is not known to the APSS processor as the chip is enumerated by WPSS Q6. These details are fetched over QMI. STA and AP modes are supported. Verified basic connectivity and ping in both the modes. An important point to note is that though WCN6750 is a PCIe device, it cannot be attached to any other platform except on Qualcomm Snapdragon SoCs due to the aforementioned reasons. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220429170502.20080-10-quic_mpubbise@quicinc.com
2022-04-29 22:35:02 +05:30
EXPORT_SYMBOL(ath11k_pcic_get_ce_msi_idx);
static void ath11k_pcic_free_ext_irq(struct ath11k_base *ab)
{
int i, j;
for (i = 0; i < ATH11K_EXT_IRQ_GRP_NUM_MAX; i++) {
struct ath11k_ext_irq_grp *irq_grp = &ab->ext_irq_grp[i];
for (j = 0; j < irq_grp->num_irq; j++)
free_irq(ab->irq_num[irq_grp->irqs[j]], irq_grp);
netif_napi_del(&irq_grp->napi);
}
}
void ath11k_pcic_free_irq(struct ath11k_base *ab)
{
int i, irq_idx;
for (i = 0; i < ab->hw_params.ce_count; i++) {
if (ath11k_ce_get_attr_flags(ab, i) & CE_ATTR_DIS_INTR)
continue;
irq_idx = ATH11K_PCI_IRQ_CE0_OFFSET + i;
free_irq(ab->irq_num[irq_idx], &ab->ce.ce_pipe[i]);
}
ath11k_pcic_free_ext_irq(ab);
}
ath11k: Add support for WCN6750 device WCN6750 is non-DBS 2x2 11AX chipset. Unlike QCA6390 which is a DBS (dual band simultaneous) solution (2 LMACs), WCN6750 has a single LMAC supporting 2G, 5G and 6G bands but will operate only on one band at any given point. WCN6750 is a PCIe based solution, but it is attached to the WPSS (Wireless Processor SubSystem) Q6 processor, hence it is enumerated by the Q6 processor. It is registered to the APSS processor (Application Processor SubSystem) as a platform device(AHB) and remoteproc APIs are used to boot up or shutdown the device like other AHB devices. Also, Device information like BAR and it's size is not known to the APSS processor as the chip is enumerated by WPSS Q6. These details are fetched over QMI. STA and AP modes are supported. Verified basic connectivity and ping in both the modes. An important point to note is that though WCN6750 is a PCIe device, it cannot be attached to any other platform except on Qualcomm Snapdragon SoCs due to the aforementioned reasons. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220429170502.20080-10-quic_mpubbise@quicinc.com
2022-04-29 22:35:02 +05:30
EXPORT_SYMBOL(ath11k_pcic_free_irq);
static void ath11k_pcic_ce_irq_enable(struct ath11k_base *ab, u16 ce_id)
{
u32 irq_idx;
/* In case of one MSI vector, we handle irq enable/disable in a
* uniform way since we only have one irq
*/
if (!test_bit(ATH11K_FLAG_MULTI_MSI_VECTORS, &ab->dev_flags))
return;
irq_idx = ATH11K_PCI_IRQ_CE0_OFFSET + ce_id;
enable_irq(ab->irq_num[irq_idx]);
}
static void ath11k_pcic_ce_irq_disable(struct ath11k_base *ab, u16 ce_id)
{
u32 irq_idx;
/* In case of one MSI vector, we handle irq enable/disable in a
* uniform way since we only have one irq
*/
if (!test_bit(ATH11K_FLAG_MULTI_MSI_VECTORS, &ab->dev_flags))
return;
irq_idx = ATH11K_PCI_IRQ_CE0_OFFSET + ce_id;
disable_irq_nosync(ab->irq_num[irq_idx]);
}
static void ath11k_pcic_ce_irqs_disable(struct ath11k_base *ab)
{
int i;
clear_bit(ATH11K_FLAG_CE_IRQ_ENABLED, &ab->dev_flags);
for (i = 0; i < ab->hw_params.ce_count; i++) {
if (ath11k_ce_get_attr_flags(ab, i) & CE_ATTR_DIS_INTR)
continue;
ath11k_pcic_ce_irq_disable(ab, i);
}
}
static void ath11k_pcic_sync_ce_irqs(struct ath11k_base *ab)
{
int i;
int irq_idx;
for (i = 0; i < ab->hw_params.ce_count; i++) {
if (ath11k_ce_get_attr_flags(ab, i) & CE_ATTR_DIS_INTR)
continue;
irq_idx = ATH11K_PCI_IRQ_CE0_OFFSET + i;
synchronize_irq(ab->irq_num[irq_idx]);
}
}
static void ath11k_pcic_ce_tasklet(struct tasklet_struct *t)
{
struct ath11k_ce_pipe *ce_pipe = from_tasklet(ce_pipe, t, intr_tq);
int irq_idx = ATH11K_PCI_IRQ_CE0_OFFSET + ce_pipe->pipe_num;
ath11k_ce_per_engine_service(ce_pipe->ab, ce_pipe->pipe_num);
enable_irq(ce_pipe->ab->irq_num[irq_idx]);
}
static irqreturn_t ath11k_pcic_ce_interrupt_handler(int irq, void *arg)
{
struct ath11k_ce_pipe *ce_pipe = arg;
struct ath11k_base *ab = ce_pipe->ab;
int irq_idx = ATH11K_PCI_IRQ_CE0_OFFSET + ce_pipe->pipe_num;
if (!test_bit(ATH11K_FLAG_CE_IRQ_ENABLED, &ab->dev_flags))
return IRQ_HANDLED;
/* last interrupt received for this CE */
ce_pipe->timestamp = jiffies;
disable_irq_nosync(ab->irq_num[irq_idx]);
tasklet_schedule(&ce_pipe->intr_tq);
return IRQ_HANDLED;
}
static void ath11k_pcic_ext_grp_disable(struct ath11k_ext_irq_grp *irq_grp)
{
struct ath11k_base *ab = irq_grp->ab;
int i;
/* In case of one MSI vector, we handle irq enable/disable
* in a uniform way since we only have one irq
*/
if (!test_bit(ATH11K_FLAG_MULTI_MSI_VECTORS, &ab->dev_flags))
return;
for (i = 0; i < irq_grp->num_irq; i++)
disable_irq_nosync(irq_grp->ab->irq_num[irq_grp->irqs[i]]);
}
static void __ath11k_pcic_ext_irq_disable(struct ath11k_base *sc)
{
int i;
clear_bit(ATH11K_FLAG_EXT_IRQ_ENABLED, &sc->dev_flags);
for (i = 0; i < ATH11K_EXT_IRQ_GRP_NUM_MAX; i++) {
struct ath11k_ext_irq_grp *irq_grp = &sc->ext_irq_grp[i];
ath11k_pcic_ext_grp_disable(irq_grp);
if (irq_grp->napi_enabled) {
napi_synchronize(&irq_grp->napi);
napi_disable(&irq_grp->napi);
irq_grp->napi_enabled = false;
}
}
}
static void ath11k_pcic_ext_grp_enable(struct ath11k_ext_irq_grp *irq_grp)
{
struct ath11k_base *ab = irq_grp->ab;
int i;
/* In case of one MSI vector, we handle irq enable/disable in a
* uniform way since we only have one irq
*/
if (!test_bit(ATH11K_FLAG_MULTI_MSI_VECTORS, &ab->dev_flags))
return;
for (i = 0; i < irq_grp->num_irq; i++)
enable_irq(irq_grp->ab->irq_num[irq_grp->irqs[i]]);
}
void ath11k_pcic_ext_irq_enable(struct ath11k_base *ab)
{
int i;
set_bit(ATH11K_FLAG_EXT_IRQ_ENABLED, &ab->dev_flags);
for (i = 0; i < ATH11K_EXT_IRQ_GRP_NUM_MAX; i++) {
struct ath11k_ext_irq_grp *irq_grp = &ab->ext_irq_grp[i];
if (!irq_grp->napi_enabled) {
napi_enable(&irq_grp->napi);
irq_grp->napi_enabled = true;
}
ath11k_pcic_ext_grp_enable(irq_grp);
}
}
ath11k: Add support for WCN6750 device WCN6750 is non-DBS 2x2 11AX chipset. Unlike QCA6390 which is a DBS (dual band simultaneous) solution (2 LMACs), WCN6750 has a single LMAC supporting 2G, 5G and 6G bands but will operate only on one band at any given point. WCN6750 is a PCIe based solution, but it is attached to the WPSS (Wireless Processor SubSystem) Q6 processor, hence it is enumerated by the Q6 processor. It is registered to the APSS processor (Application Processor SubSystem) as a platform device(AHB) and remoteproc APIs are used to boot up or shutdown the device like other AHB devices. Also, Device information like BAR and it's size is not known to the APSS processor as the chip is enumerated by WPSS Q6. These details are fetched over QMI. STA and AP modes are supported. Verified basic connectivity and ping in both the modes. An important point to note is that though WCN6750 is a PCIe device, it cannot be attached to any other platform except on Qualcomm Snapdragon SoCs due to the aforementioned reasons. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220429170502.20080-10-quic_mpubbise@quicinc.com
2022-04-29 22:35:02 +05:30
EXPORT_SYMBOL(ath11k_pcic_ext_irq_enable);
static void ath11k_pcic_sync_ext_irqs(struct ath11k_base *ab)
{
int i, j, irq_idx;
for (i = 0; i < ATH11K_EXT_IRQ_GRP_NUM_MAX; i++) {
struct ath11k_ext_irq_grp *irq_grp = &ab->ext_irq_grp[i];
for (j = 0; j < irq_grp->num_irq; j++) {
irq_idx = irq_grp->irqs[j];
synchronize_irq(ab->irq_num[irq_idx]);
}
}
}
void ath11k_pcic_ext_irq_disable(struct ath11k_base *ab)
{
__ath11k_pcic_ext_irq_disable(ab);
ath11k_pcic_sync_ext_irqs(ab);
}
ath11k: Add support for WCN6750 device WCN6750 is non-DBS 2x2 11AX chipset. Unlike QCA6390 which is a DBS (dual band simultaneous) solution (2 LMACs), WCN6750 has a single LMAC supporting 2G, 5G and 6G bands but will operate only on one band at any given point. WCN6750 is a PCIe based solution, but it is attached to the WPSS (Wireless Processor SubSystem) Q6 processor, hence it is enumerated by the Q6 processor. It is registered to the APSS processor (Application Processor SubSystem) as a platform device(AHB) and remoteproc APIs are used to boot up or shutdown the device like other AHB devices. Also, Device information like BAR and it's size is not known to the APSS processor as the chip is enumerated by WPSS Q6. These details are fetched over QMI. STA and AP modes are supported. Verified basic connectivity and ping in both the modes. An important point to note is that though WCN6750 is a PCIe device, it cannot be attached to any other platform except on Qualcomm Snapdragon SoCs due to the aforementioned reasons. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220429170502.20080-10-quic_mpubbise@quicinc.com
2022-04-29 22:35:02 +05:30
EXPORT_SYMBOL(ath11k_pcic_ext_irq_disable);
static int ath11k_pcic_ext_grp_napi_poll(struct napi_struct *napi, int budget)
{
struct ath11k_ext_irq_grp *irq_grp = container_of(napi,
struct ath11k_ext_irq_grp,
napi);
struct ath11k_base *ab = irq_grp->ab;
int work_done;
int i;
work_done = ath11k_dp_service_srng(ab, irq_grp, budget);
if (work_done < budget) {
napi_complete_done(napi, work_done);
for (i = 0; i < irq_grp->num_irq; i++)
enable_irq(irq_grp->ab->irq_num[irq_grp->irqs[i]]);
}
if (work_done > budget)
work_done = budget;
return work_done;
}
static irqreturn_t ath11k_pcic_ext_interrupt_handler(int irq, void *arg)
{
struct ath11k_ext_irq_grp *irq_grp = arg;
struct ath11k_base *ab = irq_grp->ab;
int i;
if (!test_bit(ATH11K_FLAG_EXT_IRQ_ENABLED, &ab->dev_flags))
return IRQ_HANDLED;
ath11k_dbg(irq_grp->ab, ATH11K_DBG_PCI, "ext irq:%d\n", irq);
/* last interrupt received for this group */
irq_grp->timestamp = jiffies;
for (i = 0; i < irq_grp->num_irq; i++)
disable_irq_nosync(irq_grp->ab->irq_num[irq_grp->irqs[i]]);
napi_schedule(&irq_grp->napi);
return IRQ_HANDLED;
}
static int
ath11k_pcic_get_msi_irq(struct ath11k_base *ab, unsigned int vector)
{
return ab->pci.ops->get_msi_irq(ab, vector);
}
static int ath11k_pcic_ext_irq_config(struct ath11k_base *ab)
{
int i, j, ret, num_vectors = 0;
u32 user_base_data = 0, base_vector = 0;
unsigned long irq_flags;
ret = ath11k_pcic_get_user_msi_assignment(ab, "DP", &num_vectors,
&user_base_data,
&base_vector);
if (ret < 0)
return ret;
irq_flags = IRQF_SHARED;
if (!test_bit(ATH11K_FLAG_MULTI_MSI_VECTORS, &ab->dev_flags))
irq_flags |= IRQF_NOBALANCING;
for (i = 0; i < ATH11K_EXT_IRQ_GRP_NUM_MAX; i++) {
struct ath11k_ext_irq_grp *irq_grp = &ab->ext_irq_grp[i];
u32 num_irq = 0;
irq_grp->ab = ab;
irq_grp->grp_id = i;
init_dummy_netdev(&irq_grp->napi_ndev);
netif_napi_add(&irq_grp->napi_ndev, &irq_grp->napi,
ath11k_pcic_ext_grp_napi_poll, NAPI_POLL_WEIGHT);
if (ab->hw_params.ring_mask->tx[i] ||
ab->hw_params.ring_mask->rx[i] ||
ab->hw_params.ring_mask->rx_err[i] ||
ab->hw_params.ring_mask->rx_wbm_rel[i] ||
ab->hw_params.ring_mask->reo_status[i] ||
ab->hw_params.ring_mask->rxdma2host[i] ||
ab->hw_params.ring_mask->host2rxdma[i] ||
ab->hw_params.ring_mask->rx_mon_status[i]) {
num_irq = 1;
}
irq_grp->num_irq = num_irq;
irq_grp->irqs[0] = ATH11K_PCI_IRQ_DP_OFFSET + i;
for (j = 0; j < irq_grp->num_irq; j++) {
int irq_idx = irq_grp->irqs[j];
int vector = (i % num_vectors) + base_vector;
int irq = ath11k_pcic_get_msi_irq(ab, vector);
if (irq < 0)
return irq;
ab->irq_num[irq_idx] = irq;
ath11k_dbg(ab, ATH11K_DBG_PCI,
"irq:%d group:%d\n", irq, i);
irq_set_status_flags(irq, IRQ_DISABLE_UNLAZY);
ret = request_irq(irq, ath11k_pcic_ext_interrupt_handler,
irq_flags, "DP_EXT_IRQ", irq_grp);
if (ret) {
ath11k_err(ab, "failed request irq %d: %d\n",
vector, ret);
return ret;
}
}
ath11k_pcic_ext_grp_disable(irq_grp);
}
return 0;
}
int ath11k_pcic_config_irq(struct ath11k_base *ab)
{
struct ath11k_ce_pipe *ce_pipe;
u32 msi_data_start;
u32 msi_data_count, msi_data_idx;
u32 msi_irq_start;
unsigned int msi_data;
int irq, i, ret, irq_idx;
unsigned long irq_flags;
ret = ath11k_pcic_get_user_msi_assignment(ab, "CE", &msi_data_count,
&msi_data_start, &msi_irq_start);
if (ret)
return ret;
irq_flags = IRQF_SHARED;
if (!test_bit(ATH11K_FLAG_MULTI_MSI_VECTORS, &ab->dev_flags))
irq_flags |= IRQF_NOBALANCING;
/* Configure CE irqs */
for (i = 0, msi_data_idx = 0; i < ab->hw_params.ce_count; i++) {
if (ath11k_ce_get_attr_flags(ab, i) & CE_ATTR_DIS_INTR)
continue;
msi_data = (msi_data_idx % msi_data_count) + msi_irq_start;
irq = ath11k_pcic_get_msi_irq(ab, msi_data);
if (irq < 0)
return irq;
ce_pipe = &ab->ce.ce_pipe[i];
irq_idx = ATH11K_PCI_IRQ_CE0_OFFSET + i;
tasklet_setup(&ce_pipe->intr_tq, ath11k_pcic_ce_tasklet);
ret = request_irq(irq, ath11k_pcic_ce_interrupt_handler,
irq_flags, irq_name[irq_idx], ce_pipe);
if (ret) {
ath11k_err(ab, "failed to request irq %d: %d\n",
irq_idx, ret);
return ret;
}
ab->irq_num[irq_idx] = irq;
msi_data_idx++;
ath11k_pcic_ce_irq_disable(ab, i);
}
ret = ath11k_pcic_ext_irq_config(ab);
if (ret)
return ret;
return 0;
}
ath11k: Add support for WCN6750 device WCN6750 is non-DBS 2x2 11AX chipset. Unlike QCA6390 which is a DBS (dual band simultaneous) solution (2 LMACs), WCN6750 has a single LMAC supporting 2G, 5G and 6G bands but will operate only on one band at any given point. WCN6750 is a PCIe based solution, but it is attached to the WPSS (Wireless Processor SubSystem) Q6 processor, hence it is enumerated by the Q6 processor. It is registered to the APSS processor (Application Processor SubSystem) as a platform device(AHB) and remoteproc APIs are used to boot up or shutdown the device like other AHB devices. Also, Device information like BAR and it's size is not known to the APSS processor as the chip is enumerated by WPSS Q6. These details are fetched over QMI. STA and AP modes are supported. Verified basic connectivity and ping in both the modes. An important point to note is that though WCN6750 is a PCIe device, it cannot be attached to any other platform except on Qualcomm Snapdragon SoCs due to the aforementioned reasons. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220429170502.20080-10-quic_mpubbise@quicinc.com
2022-04-29 22:35:02 +05:30
EXPORT_SYMBOL(ath11k_pcic_config_irq);
void ath11k_pcic_ce_irqs_enable(struct ath11k_base *ab)
{
int i;
set_bit(ATH11K_FLAG_CE_IRQ_ENABLED, &ab->dev_flags);
for (i = 0; i < ab->hw_params.ce_count; i++) {
if (ath11k_ce_get_attr_flags(ab, i) & CE_ATTR_DIS_INTR)
continue;
ath11k_pcic_ce_irq_enable(ab, i);
}
}
ath11k: Add support for WCN6750 device WCN6750 is non-DBS 2x2 11AX chipset. Unlike QCA6390 which is a DBS (dual band simultaneous) solution (2 LMACs), WCN6750 has a single LMAC supporting 2G, 5G and 6G bands but will operate only on one band at any given point. WCN6750 is a PCIe based solution, but it is attached to the WPSS (Wireless Processor SubSystem) Q6 processor, hence it is enumerated by the Q6 processor. It is registered to the APSS processor (Application Processor SubSystem) as a platform device(AHB) and remoteproc APIs are used to boot up or shutdown the device like other AHB devices. Also, Device information like BAR and it's size is not known to the APSS processor as the chip is enumerated by WPSS Q6. These details are fetched over QMI. STA and AP modes are supported. Verified basic connectivity and ping in both the modes. An important point to note is that though WCN6750 is a PCIe device, it cannot be attached to any other platform except on Qualcomm Snapdragon SoCs due to the aforementioned reasons. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220429170502.20080-10-quic_mpubbise@quicinc.com
2022-04-29 22:35:02 +05:30
EXPORT_SYMBOL(ath11k_pcic_ce_irqs_enable);
static void ath11k_pcic_kill_tasklets(struct ath11k_base *ab)
{
int i;
for (i = 0; i < ab->hw_params.ce_count; i++) {
struct ath11k_ce_pipe *ce_pipe = &ab->ce.ce_pipe[i];
if (ath11k_ce_get_attr_flags(ab, i) & CE_ATTR_DIS_INTR)
continue;
tasklet_kill(&ce_pipe->intr_tq);
}
}
void ath11k_pcic_ce_irq_disable_sync(struct ath11k_base *ab)
{
ath11k_pcic_ce_irqs_disable(ab);
ath11k_pcic_sync_ce_irqs(ab);
ath11k_pcic_kill_tasklets(ab);
}
ath11k: Add support for WCN6750 device WCN6750 is non-DBS 2x2 11AX chipset. Unlike QCA6390 which is a DBS (dual band simultaneous) solution (2 LMACs), WCN6750 has a single LMAC supporting 2G, 5G and 6G bands but will operate only on one band at any given point. WCN6750 is a PCIe based solution, but it is attached to the WPSS (Wireless Processor SubSystem) Q6 processor, hence it is enumerated by the Q6 processor. It is registered to the APSS processor (Application Processor SubSystem) as a platform device(AHB) and remoteproc APIs are used to boot up or shutdown the device like other AHB devices. Also, Device information like BAR and it's size is not known to the APSS processor as the chip is enumerated by WPSS Q6. These details are fetched over QMI. STA and AP modes are supported. Verified basic connectivity and ping in both the modes. An important point to note is that though WCN6750 is a PCIe device, it cannot be attached to any other platform except on Qualcomm Snapdragon SoCs due to the aforementioned reasons. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220429170502.20080-10-quic_mpubbise@quicinc.com
2022-04-29 22:35:02 +05:30
EXPORT_SYMBOL(ath11k_pcic_ce_irq_disable_sync);
void ath11k_pcic_stop(struct ath11k_base *ab)
{
ath11k_pcic_ce_irq_disable_sync(ab);
ath11k_ce_cleanup_pipes(ab);
}
ath11k: Add support for WCN6750 device WCN6750 is non-DBS 2x2 11AX chipset. Unlike QCA6390 which is a DBS (dual band simultaneous) solution (2 LMACs), WCN6750 has a single LMAC supporting 2G, 5G and 6G bands but will operate only on one band at any given point. WCN6750 is a PCIe based solution, but it is attached to the WPSS (Wireless Processor SubSystem) Q6 processor, hence it is enumerated by the Q6 processor. It is registered to the APSS processor (Application Processor SubSystem) as a platform device(AHB) and remoteproc APIs are used to boot up or shutdown the device like other AHB devices. Also, Device information like BAR and it's size is not known to the APSS processor as the chip is enumerated by WPSS Q6. These details are fetched over QMI. STA and AP modes are supported. Verified basic connectivity and ping in both the modes. An important point to note is that though WCN6750 is a PCIe device, it cannot be attached to any other platform except on Qualcomm Snapdragon SoCs due to the aforementioned reasons. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220429170502.20080-10-quic_mpubbise@quicinc.com
2022-04-29 22:35:02 +05:30
EXPORT_SYMBOL(ath11k_pcic_stop);
int ath11k_pcic_start(struct ath11k_base *ab)
{
set_bit(ATH11K_FLAG_DEVICE_INIT_DONE, &ab->dev_flags);
ath11k_pcic_ce_irqs_enable(ab);
ath11k_ce_rx_post_buf(ab);
return 0;
}
ath11k: Add support for WCN6750 device WCN6750 is non-DBS 2x2 11AX chipset. Unlike QCA6390 which is a DBS (dual band simultaneous) solution (2 LMACs), WCN6750 has a single LMAC supporting 2G, 5G and 6G bands but will operate only on one band at any given point. WCN6750 is a PCIe based solution, but it is attached to the WPSS (Wireless Processor SubSystem) Q6 processor, hence it is enumerated by the Q6 processor. It is registered to the APSS processor (Application Processor SubSystem) as a platform device(AHB) and remoteproc APIs are used to boot up or shutdown the device like other AHB devices. Also, Device information like BAR and it's size is not known to the APSS processor as the chip is enumerated by WPSS Q6. These details are fetched over QMI. STA and AP modes are supported. Verified basic connectivity and ping in both the modes. An important point to note is that though WCN6750 is a PCIe device, it cannot be attached to any other platform except on Qualcomm Snapdragon SoCs due to the aforementioned reasons. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220429170502.20080-10-quic_mpubbise@quicinc.com
2022-04-29 22:35:02 +05:30
EXPORT_SYMBOL(ath11k_pcic_start);
int ath11k_pcic_map_service_to_pipe(struct ath11k_base *ab, u16 service_id,
u8 *ul_pipe, u8 *dl_pipe)
{
const struct service_to_pipe *entry;
bool ul_set = false, dl_set = false;
int i;
for (i = 0; i < ab->hw_params.svc_to_ce_map_len; i++) {
entry = &ab->hw_params.svc_to_ce_map[i];
if (__le32_to_cpu(entry->service_id) != service_id)
continue;
switch (__le32_to_cpu(entry->pipedir)) {
case PIPEDIR_NONE:
break;
case PIPEDIR_IN:
WARN_ON(dl_set);
*dl_pipe = __le32_to_cpu(entry->pipenum);
dl_set = true;
break;
case PIPEDIR_OUT:
WARN_ON(ul_set);
*ul_pipe = __le32_to_cpu(entry->pipenum);
ul_set = true;
break;
case PIPEDIR_INOUT:
WARN_ON(dl_set);
WARN_ON(ul_set);
*dl_pipe = __le32_to_cpu(entry->pipenum);
*ul_pipe = __le32_to_cpu(entry->pipenum);
dl_set = true;
ul_set = true;
break;
}
}
if (WARN_ON(!ul_set || !dl_set))
return -ENOENT;
return 0;
}
ath11k: Add support for WCN6750 device WCN6750 is non-DBS 2x2 11AX chipset. Unlike QCA6390 which is a DBS (dual band simultaneous) solution (2 LMACs), WCN6750 has a single LMAC supporting 2G, 5G and 6G bands but will operate only on one band at any given point. WCN6750 is a PCIe based solution, but it is attached to the WPSS (Wireless Processor SubSystem) Q6 processor, hence it is enumerated by the Q6 processor. It is registered to the APSS processor (Application Processor SubSystem) as a platform device(AHB) and remoteproc APIs are used to boot up or shutdown the device like other AHB devices. Also, Device information like BAR and it's size is not known to the APSS processor as the chip is enumerated by WPSS Q6. These details are fetched over QMI. STA and AP modes are supported. Verified basic connectivity and ping in both the modes. An important point to note is that though WCN6750 is a PCIe device, it cannot be attached to any other platform except on Qualcomm Snapdragon SoCs due to the aforementioned reasons. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220429170502.20080-10-quic_mpubbise@quicinc.com
2022-04-29 22:35:02 +05:30
EXPORT_SYMBOL(ath11k_pcic_map_service_to_pipe);
wifi: ath11k: Fix register write failure on QCN9074 Commit 56c8ccf331bd ("ath11k: Add register access logic for WCN6750") regressed QCN9074. With the above mentioned commit, writes are failing for some registers on QCN9074 although the device seems to work normally. ath11k_pci 0000:03:00.0: failed to set pcie link register0x01e0e0a8: 0xffffffff != 0x00000010 ath11k_pci 0000:03:00.0: failed to set sysclk: -110 PCIe devices in ath11k (QCA6390, WCN6855, QCN9074, WCN6750) use window concept for register accesses. There are two schemes, dynamic & static window. In dynamic window scheme, a single window(region in the BAR) is mapped either to CE or DP register windows at any give time. QCA6390 & WCN6855 follow this scheme for register accesses. In static window scheme, CE & DP register windows are statically mapped to separate regions with in the BAR so that there is no switching of register windows between CE & DP register accesses. QCN9074 & WCN6750 follow this scheme although the window start offsets are different for QCN9074 & WCN6750. QCN9074 uses 3rd & 2nd window for DP & CE register accesses respectively whereas WCN6750 uses 1st & 2nd window for DP & CE. In QCN9074, along with 2nd & 3rd windows, 1st window is also used for certain configurations which commit 56c8ccf331bd ("ath11k: Add register access logic for WCN6750") did not account for and hence the regression. Fix this by going back to the original way of accessing the registers on QCN9074. Since this diverges from WCN6750 way of accessing registers, it is required to register window_read32/window_write32() pci_ops for WCN6750. We can also get rid of dp_window_idx & ce_window_idx members in hw_params, so remove them. Also add a new API ath11k_pcic_register_pci_ops() for registering pci_ops to the ath11k core. This API checks for mandatory pci_ops() and reports error if those are missing. Also initialize unused pci_ops to NULL. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1 Fixes: 56c8ccf331bd ("ath11k: Add register access logic for WCN6750") Reported-by: Maxime Bizon <mbizon@freebox.fr> Tested-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220608062954.27792-1-quic_mpubbise@quicinc.com
2022-07-25 20:49:10 +03:00
int ath11k_pcic_register_pci_ops(struct ath11k_base *ab,
const struct ath11k_pci_ops *pci_ops)
{
if (!pci_ops)
return 0;
/* Return error if mandatory pci_ops callbacks are missing */
if (!pci_ops->get_msi_irq || !pci_ops->window_write32 ||
!pci_ops->window_read32)
return -EINVAL;
ab->pci.ops = pci_ops;
return 0;
}
EXPORT_SYMBOL(ath11k_pcic_register_pci_ops);