linux/drivers/edac/cell_edac.c

283 lines
7.7 KiB
C
Raw Normal View History

/*
* Cell MIC driver for ECC counting
*
* Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
* <benh@kernel.crashing.org>
*
* This file may be distributed under the terms of the
* GNU General Public License.
*/
#undef DEBUG
#include <linux/edac.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/stop_machine.h>
#include <linux/io.h>
#include <linux/of_address.h>
#include <asm/machdep.h>
#include <asm/cell-regs.h>
#include "edac_core.h"
struct cell_edac_priv
{
struct cbe_mic_tm_regs __iomem *regs;
int node;
int chanmask;
#ifdef DEBUG
u64 prev_fir;
#endif
};
static void cell_edac_count_ce(struct mem_ctl_info *mci, int chan, u64 ar)
{
struct cell_edac_priv *priv = mci->pvt_info;
struct csrow_info *csrow = mci->csrows[0];
unsigned long address, pfn, offset, syndrome;
dev_dbg(mci->pdev, "ECC CE err on node %d, channel %d, ar = 0x%016llx\n",
priv->node, chan, ar);
/* Address decoding is likely a bit bogus, to dbl check */
address = (ar & 0xffffffffe0000000ul) >> 29;
if (priv->chanmask == 0x3)
address = (address << 1) | chan;
pfn = address >> PAGE_SHIFT;
offset = address & ~PAGE_MASK;
syndrome = (ar & 0x000000001fe00000ul) >> 21;
/* TODO: Decoding of the error address */
edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
csrow->first_page + pfn, offset, syndrome,
0, chan, -1, "", "");
}
static void cell_edac_count_ue(struct mem_ctl_info *mci, int chan, u64 ar)
{
struct cell_edac_priv *priv = mci->pvt_info;
struct csrow_info *csrow = mci->csrows[0];
unsigned long address, pfn, offset;
dev_dbg(mci->pdev, "ECC UE err on node %d, channel %d, ar = 0x%016llx\n",
priv->node, chan, ar);
/* Address decoding is likely a bit bogus, to dbl check */
address = (ar & 0xffffffffe0000000ul) >> 29;
if (priv->chanmask == 0x3)
address = (address << 1) | chan;
pfn = address >> PAGE_SHIFT;
offset = address & ~PAGE_MASK;
/* TODO: Decoding of the error address */
edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
csrow->first_page + pfn, offset, 0,
0, chan, -1, "", "");
}
static void cell_edac_check(struct mem_ctl_info *mci)
{
struct cell_edac_priv *priv = mci->pvt_info;
u64 fir, addreg, clear = 0;
fir = in_be64(&priv->regs->mic_fir);
#ifdef DEBUG
if (fir != priv->prev_fir) {
dev_dbg(mci->pdev, "fir change : 0x%016lx\n", fir);
priv->prev_fir = fir;
}
#endif
if ((priv->chanmask & 0x1) && (fir & CBE_MIC_FIR_ECC_SINGLE_0_ERR)) {
addreg = in_be64(&priv->regs->mic_df_ecc_address_0);
clear |= CBE_MIC_FIR_ECC_SINGLE_0_RESET;
cell_edac_count_ce(mci, 0, addreg);
}
if ((priv->chanmask & 0x2) && (fir & CBE_MIC_FIR_ECC_SINGLE_1_ERR)) {
addreg = in_be64(&priv->regs->mic_df_ecc_address_1);
clear |= CBE_MIC_FIR_ECC_SINGLE_1_RESET;
cell_edac_count_ce(mci, 1, addreg);
}
if ((priv->chanmask & 0x1) && (fir & CBE_MIC_FIR_ECC_MULTI_0_ERR)) {
addreg = in_be64(&priv->regs->mic_df_ecc_address_0);
clear |= CBE_MIC_FIR_ECC_MULTI_0_RESET;
cell_edac_count_ue(mci, 0, addreg);
}
if ((priv->chanmask & 0x2) && (fir & CBE_MIC_FIR_ECC_MULTI_1_ERR)) {
addreg = in_be64(&priv->regs->mic_df_ecc_address_1);
clear |= CBE_MIC_FIR_ECC_MULTI_1_RESET;
cell_edac_count_ue(mci, 1, addreg);
}
/* The procedure for clearing FIR bits is a bit ... weird */
if (clear) {
fir &= ~(CBE_MIC_FIR_ECC_ERR_MASK | CBE_MIC_FIR_ECC_SET_MASK);
fir |= CBE_MIC_FIR_ECC_RESET_MASK;
fir &= ~clear;
out_be64(&priv->regs->mic_fir, fir);
(void)in_be64(&priv->regs->mic_fir);
mb(); /* sync up */
#ifdef DEBUG
fir = in_be64(&priv->regs->mic_fir);
dev_dbg(mci->pdev, "fir clear : 0x%016lx\n", fir);
#endif
}
}
static void cell_edac_init_csrows(struct mem_ctl_info *mci)
{
struct csrow_info *csrow = mci->csrows[0];
edac: move dimm properties to struct dimm_info On systems based on chip select rows, all channels need to use memories with the same properties, otherwise the memories on channels A and B won't be recognized. However, such assumption is not true for all types of memory controllers. Controllers for FB-DIMM's don't have such requirements. Also, modern Intel controllers seem to be capable of handling such differences. So, we need to get rid of storing the DIMM information into a per-csrow data, storing it, instead at the right place. The first step is to move grain, mtype, dtype and edac_mode to the per-dimm struct. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: James Bottomley <James.Bottomley@parallels.com> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: Mike Williams <mike@mikebwilliams.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-27 21:38:08 +00:00
struct dimm_info *dimm;
struct cell_edac_priv *priv = mci->pvt_info;
struct device_node *np;
edac: move dimm properties to struct dimm_info On systems based on chip select rows, all channels need to use memories with the same properties, otherwise the memories on channels A and B won't be recognized. However, such assumption is not true for all types of memory controllers. Controllers for FB-DIMM's don't have such requirements. Also, modern Intel controllers seem to be capable of handling such differences. So, we need to get rid of storing the DIMM information into a per-csrow data, storing it, instead at the right place. The first step is to move grain, mtype, dtype and edac_mode to the per-dimm struct. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: James Bottomley <James.Bottomley@parallels.com> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: Mike Williams <mike@mikebwilliams.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-27 21:38:08 +00:00
int j;
u32 nr_pages;
for_each_node_by_name(np, "memory") {
struct resource r;
/* We "know" that the Cell firmware only creates one entry
* in the "memory" nodes. If that changes, this code will
* need to be adapted.
*/
if (of_address_to_resource(np, 0, &r))
continue;
if (of_node_to_nid(np) != priv->node)
continue;
csrow->first_page = r.start >> PAGE_SHIFT;
nr_pages = resource_size(&r) >> PAGE_SHIFT;
csrow->last_page = csrow->first_page + nr_pages - 1;
edac: move dimm properties to struct dimm_info On systems based on chip select rows, all channels need to use memories with the same properties, otherwise the memories on channels A and B won't be recognized. However, such assumption is not true for all types of memory controllers. Controllers for FB-DIMM's don't have such requirements. Also, modern Intel controllers seem to be capable of handling such differences. So, we need to get rid of storing the DIMM information into a per-csrow data, storing it, instead at the right place. The first step is to move grain, mtype, dtype and edac_mode to the per-dimm struct. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: James Bottomley <James.Bottomley@parallels.com> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: Mike Williams <mike@mikebwilliams.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-27 21:38:08 +00:00
for (j = 0; j < csrow->nr_channels; j++) {
dimm = csrow->channels[j]->dimm;
edac: move dimm properties to struct dimm_info On systems based on chip select rows, all channels need to use memories with the same properties, otherwise the memories on channels A and B won't be recognized. However, such assumption is not true for all types of memory controllers. Controllers for FB-DIMM's don't have such requirements. Also, modern Intel controllers seem to be capable of handling such differences. So, we need to get rid of storing the DIMM information into a per-csrow data, storing it, instead at the right place. The first step is to move grain, mtype, dtype and edac_mode to the per-dimm struct. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: James Bottomley <James.Bottomley@parallels.com> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: Mike Williams <mike@mikebwilliams.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-27 21:38:08 +00:00
dimm->mtype = MEM_XDR;
dimm->edac_mode = EDAC_SECDED;
dimm->nr_pages = nr_pages / csrow->nr_channels;
edac: move dimm properties to struct dimm_info On systems based on chip select rows, all channels need to use memories with the same properties, otherwise the memories on channels A and B won't be recognized. However, such assumption is not true for all types of memory controllers. Controllers for FB-DIMM's don't have such requirements. Also, modern Intel controllers seem to be capable of handling such differences. So, we need to get rid of storing the DIMM information into a per-csrow data, storing it, instead at the right place. The first step is to move grain, mtype, dtype and edac_mode to the per-dimm struct. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Mark Gross <mark.gross@intel.com> Cc: Jason Uhlenkott <juhlenko@akamai.com> Cc: Tim Small <tim@buttersideup.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: "Arvind R." <arvino55@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Egor Martovetsky <egor@pasemi.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: James Bottomley <James.Bottomley@parallels.com> Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: Mike Williams <mike@mikebwilliams.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-01-27 21:38:08 +00:00
}
dev_dbg(mci->pdev,
"Initialized on node %d, chanmask=0x%x,"
" first_page=0x%lx, nr_pages=0x%x\n",
priv->node, priv->chanmask,
csrow->first_page, nr_pages);
break;
}
of_node_put(np);
}
static int cell_edac_probe(struct platform_device *pdev)
{
struct cbe_mic_tm_regs __iomem *regs;
struct mem_ctl_info *mci;
struct edac_mc_layer layers[2];
struct cell_edac_priv *priv;
u64 reg;
int rc, chanmask, num_chans;
regs = cbe_get_cpu_mic_tm_regs(cbe_node_to_cpu(pdev->id));
if (regs == NULL)
return -ENODEV;
edac_op_state = EDAC_OPSTATE_POLL;
/* Get channel population */
reg = in_be64(&regs->mic_mnt_cfg);
dev_dbg(&pdev->dev, "MIC_MNT_CFG = 0x%016llx\n", reg);
chanmask = 0;
if (reg & CBE_MIC_MNT_CFG_CHAN_0_POP)
chanmask |= 0x1;
if (reg & CBE_MIC_MNT_CFG_CHAN_1_POP)
chanmask |= 0x2;
if (chanmask == 0) {
dev_warn(&pdev->dev,
"Yuck ! No channel populated ? Aborting !\n");
return -ENODEV;
}
dev_dbg(&pdev->dev, "Initial FIR = 0x%016llx\n",
in_be64(&regs->mic_fir));
/* Allocate & init EDAC MC data structure */
num_chans = chanmask == 3 ? 2 : 1;
layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
layers[0].size = 1;
layers[0].is_virt_csrow = true;
layers[1].type = EDAC_MC_LAYER_CHANNEL;
layers[1].size = num_chans;
layers[1].is_virt_csrow = false;
mci = edac_mc_alloc(pdev->id, ARRAY_SIZE(layers), layers,
sizeof(struct cell_edac_priv));
if (mci == NULL)
return -ENOMEM;
priv = mci->pvt_info;
priv->regs = regs;
priv->node = pdev->id;
priv->chanmask = chanmask;
mci->pdev = &pdev->dev;
mci->mtype_cap = MEM_FLAG_XDR;
mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED;
mci->edac_cap = EDAC_FLAG_EC | EDAC_FLAG_SECDED;
mci->mod_name = "cell_edac";
mci->ctl_name = "MIC";
mci->dev_name = dev_name(&pdev->dev);
mci->edac_check = cell_edac_check;
cell_edac_init_csrows(mci);
/* Register with EDAC core */
rc = edac_mc_add_mc(mci);
if (rc) {
dev_err(&pdev->dev, "failed to register with EDAC core\n");
edac_mc_free(mci);
return rc;
}
return 0;
}
static int cell_edac_remove(struct platform_device *pdev)
{
struct mem_ctl_info *mci = edac_mc_del_mc(&pdev->dev);
if (mci)
edac_mc_free(mci);
return 0;
}
static struct platform_driver cell_edac_driver = {
.driver = {
.name = "cbe-mic",
},
.probe = cell_edac_probe,
.remove = cell_edac_remove,
};
static int __init cell_edac_init(void)
{
/* Sanity check registers data structure */
BUILD_BUG_ON(offsetof(struct cbe_mic_tm_regs,
mic_df_ecc_address_0) != 0xf8);
BUILD_BUG_ON(offsetof(struct cbe_mic_tm_regs,
mic_df_ecc_address_1) != 0x1b8);
BUILD_BUG_ON(offsetof(struct cbe_mic_tm_regs,
mic_df_config) != 0x218);
BUILD_BUG_ON(offsetof(struct cbe_mic_tm_regs,
mic_fir) != 0x230);
BUILD_BUG_ON(offsetof(struct cbe_mic_tm_regs,
mic_mnt_cfg) != 0x210);
BUILD_BUG_ON(offsetof(struct cbe_mic_tm_regs,
mic_exc) != 0x208);
return platform_driver_register(&cell_edac_driver);
}
static void __exit cell_edac_exit(void)
{
platform_driver_unregister(&cell_edac_driver);
}
module_init(cell_edac_init);
module_exit(cell_edac_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
MODULE_DESCRIPTION("ECC counting for Cell MIC");