drivers/net/ethernet/microchip/lan966x/Makefile

# SPDX-License-Identifier: GPL-2.0-only
#
# Makefile for the Microchip Lan966x network device drivers.
#

obj-$(CONFIG_LAN966X_SWITCH) += lan966x-switch.o

lan966x-switch-objs  := lan966x_main.o lan966x_phylink.o lan966x_port.o \
			lan966x_mac.o lan966x_ethtool.o lan966x_switchdev.o \
			lan966x_vlan.o lan966x_fdb.o lan966x_mdb.o \
			lan966x_ptp.o lan966x_fdma.o
net: lan966x: add the basic lan966x driver This patch adds basic SwitchDev driver framework for lan966x. It includes only the IO range mapping and probing of the switch. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2021-11-29 13:43:55 +01:00			`# SPDX-License-Identifier: GPL-2.0-only`
			`#`
			`# Makefile for the Microchip Lan966x network device drivers.`
			`#`

			`obj-$(CONFIG_LAN966X_SWITCH) += lan966x-switch.o`

net: lan966x: add mactable support This patch adds support for MAC table operations like add and forget. Also add the functionality to read the MAC address from DT, if there is no MAC set in DT it would use a random one. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2021-11-29 13:43:57 +01:00			`lan966x-switch-objs := lan966x_main.o lan966x_phylink.o lan966x_port.o \`
net: lan966x: Add vlan support. Extend the driver to support vlan filtering by implementing the switchdev calls SWITCHDEV_OBJ_ID_PORT_VLAN, SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2021-12-18 22:49:44 +01:00			`lan966x_mac.o lan966x_ethtool.o lan966x_switchdev.o \`
net: lan966x: Add support for ptp clocks The lan966x has 3 PHC. Enable each of them, for now all the timestamping is happening on the first PHC. Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2022-01-31 11:01:18 +01:00			`lan966x_vlan.o lan966x_fdb.o lan966x_mdb.o \`
net: lan966x: Add FDMA functionality Ethernet frames can be extracted or injected to or from the device's DDR memory. There is one channel for injection and one channel for extraction. Each of these channels contain a linked list of DCBs which contains DB. The DCB contains only 1 DB for both the injection and extraction. Each DB contains a frame. Every time when a frame is received or transmitted an interrupt is generated. It is not possible to use both the FDMA and the manual injection/extraction of the frames. Therefore the FDMA has priority over the manual because of better performance values. FDMA: iperf -c 192.168.1.1 [ 5] 0.00-10.02 sec 420 MBytes 352 Mbits/sec 0 sender [ 5] 0.00-10.03 sec 420 MBytes 351 Mbits/sec receiver iperf -c 192.168.1.1 -R [ 5] 0.00-10.01 sec 528 MBytes 442 Mbits/sec 0 sender [ 5] 0.00-10.00 sec 524 MBytes 440 Mbits/sec receiver Manual: iperf -c 192.168.1.1 [ 5] 0.00-10.02 sec 93.8 MBytes 78.5 Mbits/sec 0 sender [ 5] 0.00-10.03 sec 93.8 MBytes 78.4 Mbits/sec receiver ipers -c 192.168.1.1 -R [ 5] 0.00-10.03 sec 121 MBytes 101 Mbits/sec 0 sender [ 5] 0.00-10.01 sec 118 MBytes 99.0 Mbits/sec receiver Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 2022-04-08 09:03:56 +02:00			`lan966x_ptp.o lan966x_fdma.o`