linux/tools/perf/arch/arm/util/auxtrace.c

111 lines
2.5 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright(C) 2015 Linaro Limited. All rights reserved.
* Author: Mathieu Poirier <mathieu.poirier@linaro.org>
*/
#include <stdbool.h>
#include <linux/coresight-pmu.h>
#include <linux/zalloc.h>
#include "../../util/auxtrace.h"
#include "../../util/debug.h"
#include "../../util/evlist.h"
#include "../../util/pmu.h"
#include "cs-etm.h"
perf tools: Add ARM Statistical Profiling Extensions (SPE) support 'perf record' and 'perf report --dump-raw-trace' supported in this release. Example usage: # perf record -e arm_spe/ts_enable=1,pa_enable=1/ dd if=/dev/zero of=/dev/null count=10000 # perf report --dump-raw-trace Note that the perf.data file is portable, so the report can be run on another architecture host if necessary. Output will contain raw SPE data and its textual representation, such as: 0x5c8 [0x30]: PERF_RECORD_AUXTRACE size: 0x200000 offset: 0 ref: 0x1891ad0e idx: 1 tid: 2227 cpu: 1 . . ... ARM SPE data: size 2097152 bytes . 00000000: 49 00 LD . 00000002: b2 c0 3b 29 0f 00 00 ff ff VA 0xffff00000f293bc0 . 0000000b: b3 c0 eb 24 fb 00 00 00 80 PA 0xfb24ebc0 ns=1 . 00000014: 9a 00 00 LAT 0 XLAT . 00000017: 42 16 EV RETIRED L1D-ACCESS TLB-ACCESS . 00000019: b0 00 c4 15 08 00 00 ff ff PC 0xff00000815c400 el3 ns=1 . 00000022: 98 00 00 LAT 0 TOT . 00000025: 71 36 6c 21 2c 09 00 00 00 TS 39395093558 . 0000002e: 49 00 LD . 00000030: b2 80 3c 29 0f 00 00 ff ff VA 0xffff00000f293c80 . 00000039: b3 80 ec 24 fb 00 00 00 80 PA 0xfb24ec80 ns=1 . 00000042: 9a 00 00 LAT 0 XLAT . 00000045: 42 16 EV RETIRED L1D-ACCESS TLB-ACCESS . 00000047: b0 f4 11 16 08 00 00 ff ff PC 0xff0000081611f4 el3 ns=1 . 00000050: 98 00 00 LAT 0 TOT . 00000053: 71 36 6c 21 2c 09 00 00 00 TS 39395093558 . 0000005c: 48 00 INSN-OTHER . 0000005e: 42 02 EV RETIRED . 00000060: b0 2c ef 7f 08 00 00 ff ff PC 0xff0000087fef2c el3 ns=1 . 00000069: 98 00 00 LAT 0 TOT . 0000006c: 71 d1 6f 21 2c 09 00 00 00 TS 39395094481 ... Other release notes: - applies to acme's perf/{core,urgent} branches, likely elsewhere - Report is self-contained within the tool. Record requires enabling the kernel SPE driver by setting CONFIG_ARM_SPE_PMU. - The intel-bts implementation was used as a starting point; its min/default/max buffer sizes and power of 2 pages granularity need to be revisited for ARM SPE - Recording across multiple SPE clusters/domains not supported - Snapshot support (record -S), and conversion to native perf events (e.g., via 'perf inject --itrace'), are also not supported - Technically both cs-etm and spe can be used simultaneously, however disabled for simplicity in this release Signed-off-by: Kim Phillips <kim.phillips@arm.com> Reviewed-by: Dongjiu Geng <gengdongjiu@huawei.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rob Herring <robh@kernel.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wang Nan <wangnan0@huawei.com> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20180114132850.0b127434b704a26bad13268f@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-14 19:28:50 +00:00
#include "arm-spe.h"
static struct perf_pmu **find_all_arm_spe_pmus(int *nr_spes, int *err)
{
struct perf_pmu **arm_spe_pmus = NULL;
int ret, i, nr_cpus = sysconf(_SC_NPROCESSORS_CONF);
/* arm_spe_xxxxxxxxx\0 */
char arm_spe_pmu_name[sizeof(ARM_SPE_PMU_NAME) + 10];
arm_spe_pmus = zalloc(sizeof(struct perf_pmu *) * nr_cpus);
if (!arm_spe_pmus) {
pr_err("spes alloc failed\n");
*err = -ENOMEM;
return NULL;
}
for (i = 0; i < nr_cpus; i++) {
ret = sprintf(arm_spe_pmu_name, "%s%d", ARM_SPE_PMU_NAME, i);
if (ret < 0) {
pr_err("sprintf failed\n");
*err = -ENOMEM;
return NULL;
}
arm_spe_pmus[*nr_spes] = perf_pmu__find(arm_spe_pmu_name);
if (arm_spe_pmus[*nr_spes]) {
pr_debug2("%s %d: arm_spe_pmu %d type %d name %s\n",
__func__, __LINE__, *nr_spes,
arm_spe_pmus[*nr_spes]->type,
arm_spe_pmus[*nr_spes]->name);
(*nr_spes)++;
}
}
return arm_spe_pmus;
}
struct auxtrace_record
*auxtrace_record__init(struct evlist *evlist, int *err)
{
struct perf_pmu *cs_etm_pmu;
struct evsel *evsel;
bool found_etm = false;
perf tools: Add ARM Statistical Profiling Extensions (SPE) support 'perf record' and 'perf report --dump-raw-trace' supported in this release. Example usage: # perf record -e arm_spe/ts_enable=1,pa_enable=1/ dd if=/dev/zero of=/dev/null count=10000 # perf report --dump-raw-trace Note that the perf.data file is portable, so the report can be run on another architecture host if necessary. Output will contain raw SPE data and its textual representation, such as: 0x5c8 [0x30]: PERF_RECORD_AUXTRACE size: 0x200000 offset: 0 ref: 0x1891ad0e idx: 1 tid: 2227 cpu: 1 . . ... ARM SPE data: size 2097152 bytes . 00000000: 49 00 LD . 00000002: b2 c0 3b 29 0f 00 00 ff ff VA 0xffff00000f293bc0 . 0000000b: b3 c0 eb 24 fb 00 00 00 80 PA 0xfb24ebc0 ns=1 . 00000014: 9a 00 00 LAT 0 XLAT . 00000017: 42 16 EV RETIRED L1D-ACCESS TLB-ACCESS . 00000019: b0 00 c4 15 08 00 00 ff ff PC 0xff00000815c400 el3 ns=1 . 00000022: 98 00 00 LAT 0 TOT . 00000025: 71 36 6c 21 2c 09 00 00 00 TS 39395093558 . 0000002e: 49 00 LD . 00000030: b2 80 3c 29 0f 00 00 ff ff VA 0xffff00000f293c80 . 00000039: b3 80 ec 24 fb 00 00 00 80 PA 0xfb24ec80 ns=1 . 00000042: 9a 00 00 LAT 0 XLAT . 00000045: 42 16 EV RETIRED L1D-ACCESS TLB-ACCESS . 00000047: b0 f4 11 16 08 00 00 ff ff PC 0xff0000081611f4 el3 ns=1 . 00000050: 98 00 00 LAT 0 TOT . 00000053: 71 36 6c 21 2c 09 00 00 00 TS 39395093558 . 0000005c: 48 00 INSN-OTHER . 0000005e: 42 02 EV RETIRED . 00000060: b0 2c ef 7f 08 00 00 ff ff PC 0xff0000087fef2c el3 ns=1 . 00000069: 98 00 00 LAT 0 TOT . 0000006c: 71 d1 6f 21 2c 09 00 00 00 TS 39395094481 ... Other release notes: - applies to acme's perf/{core,urgent} branches, likely elsewhere - Report is self-contained within the tool. Record requires enabling the kernel SPE driver by setting CONFIG_ARM_SPE_PMU. - The intel-bts implementation was used as a starting point; its min/default/max buffer sizes and power of 2 pages granularity need to be revisited for ARM SPE - Recording across multiple SPE clusters/domains not supported - Snapshot support (record -S), and conversion to native perf events (e.g., via 'perf inject --itrace'), are also not supported - Technically both cs-etm and spe can be used simultaneously, however disabled for simplicity in this release Signed-off-by: Kim Phillips <kim.phillips@arm.com> Reviewed-by: Dongjiu Geng <gengdongjiu@huawei.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rob Herring <robh@kernel.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wang Nan <wangnan0@huawei.com> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20180114132850.0b127434b704a26bad13268f@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-14 19:28:50 +00:00
bool found_spe = false;
static struct perf_pmu **arm_spe_pmus = NULL;
static int nr_spes = 0;
int i = 0;
perf tools: Add ARM Statistical Profiling Extensions (SPE) support 'perf record' and 'perf report --dump-raw-trace' supported in this release. Example usage: # perf record -e arm_spe/ts_enable=1,pa_enable=1/ dd if=/dev/zero of=/dev/null count=10000 # perf report --dump-raw-trace Note that the perf.data file is portable, so the report can be run on another architecture host if necessary. Output will contain raw SPE data and its textual representation, such as: 0x5c8 [0x30]: PERF_RECORD_AUXTRACE size: 0x200000 offset: 0 ref: 0x1891ad0e idx: 1 tid: 2227 cpu: 1 . . ... ARM SPE data: size 2097152 bytes . 00000000: 49 00 LD . 00000002: b2 c0 3b 29 0f 00 00 ff ff VA 0xffff00000f293bc0 . 0000000b: b3 c0 eb 24 fb 00 00 00 80 PA 0xfb24ebc0 ns=1 . 00000014: 9a 00 00 LAT 0 XLAT . 00000017: 42 16 EV RETIRED L1D-ACCESS TLB-ACCESS . 00000019: b0 00 c4 15 08 00 00 ff ff PC 0xff00000815c400 el3 ns=1 . 00000022: 98 00 00 LAT 0 TOT . 00000025: 71 36 6c 21 2c 09 00 00 00 TS 39395093558 . 0000002e: 49 00 LD . 00000030: b2 80 3c 29 0f 00 00 ff ff VA 0xffff00000f293c80 . 00000039: b3 80 ec 24 fb 00 00 00 80 PA 0xfb24ec80 ns=1 . 00000042: 9a 00 00 LAT 0 XLAT . 00000045: 42 16 EV RETIRED L1D-ACCESS TLB-ACCESS . 00000047: b0 f4 11 16 08 00 00 ff ff PC 0xff0000081611f4 el3 ns=1 . 00000050: 98 00 00 LAT 0 TOT . 00000053: 71 36 6c 21 2c 09 00 00 00 TS 39395093558 . 0000005c: 48 00 INSN-OTHER . 0000005e: 42 02 EV RETIRED . 00000060: b0 2c ef 7f 08 00 00 ff ff PC 0xff0000087fef2c el3 ns=1 . 00000069: 98 00 00 LAT 0 TOT . 0000006c: 71 d1 6f 21 2c 09 00 00 00 TS 39395094481 ... Other release notes: - applies to acme's perf/{core,urgent} branches, likely elsewhere - Report is self-contained within the tool. Record requires enabling the kernel SPE driver by setting CONFIG_ARM_SPE_PMU. - The intel-bts implementation was used as a starting point; its min/default/max buffer sizes and power of 2 pages granularity need to be revisited for ARM SPE - Recording across multiple SPE clusters/domains not supported - Snapshot support (record -S), and conversion to native perf events (e.g., via 'perf inject --itrace'), are also not supported - Technically both cs-etm and spe can be used simultaneously, however disabled for simplicity in this release Signed-off-by: Kim Phillips <kim.phillips@arm.com> Reviewed-by: Dongjiu Geng <gengdongjiu@huawei.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rob Herring <robh@kernel.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wang Nan <wangnan0@huawei.com> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20180114132850.0b127434b704a26bad13268f@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-14 19:28:50 +00:00
if (!evlist)
return NULL;
cs_etm_pmu = perf_pmu__find(CORESIGHT_ETM_PMU_NAME);
perf tools: Add ARM Statistical Profiling Extensions (SPE) support 'perf record' and 'perf report --dump-raw-trace' supported in this release. Example usage: # perf record -e arm_spe/ts_enable=1,pa_enable=1/ dd if=/dev/zero of=/dev/null count=10000 # perf report --dump-raw-trace Note that the perf.data file is portable, so the report can be run on another architecture host if necessary. Output will contain raw SPE data and its textual representation, such as: 0x5c8 [0x30]: PERF_RECORD_AUXTRACE size: 0x200000 offset: 0 ref: 0x1891ad0e idx: 1 tid: 2227 cpu: 1 . . ... ARM SPE data: size 2097152 bytes . 00000000: 49 00 LD . 00000002: b2 c0 3b 29 0f 00 00 ff ff VA 0xffff00000f293bc0 . 0000000b: b3 c0 eb 24 fb 00 00 00 80 PA 0xfb24ebc0 ns=1 . 00000014: 9a 00 00 LAT 0 XLAT . 00000017: 42 16 EV RETIRED L1D-ACCESS TLB-ACCESS . 00000019: b0 00 c4 15 08 00 00 ff ff PC 0xff00000815c400 el3 ns=1 . 00000022: 98 00 00 LAT 0 TOT . 00000025: 71 36 6c 21 2c 09 00 00 00 TS 39395093558 . 0000002e: 49 00 LD . 00000030: b2 80 3c 29 0f 00 00 ff ff VA 0xffff00000f293c80 . 00000039: b3 80 ec 24 fb 00 00 00 80 PA 0xfb24ec80 ns=1 . 00000042: 9a 00 00 LAT 0 XLAT . 00000045: 42 16 EV RETIRED L1D-ACCESS TLB-ACCESS . 00000047: b0 f4 11 16 08 00 00 ff ff PC 0xff0000081611f4 el3 ns=1 . 00000050: 98 00 00 LAT 0 TOT . 00000053: 71 36 6c 21 2c 09 00 00 00 TS 39395093558 . 0000005c: 48 00 INSN-OTHER . 0000005e: 42 02 EV RETIRED . 00000060: b0 2c ef 7f 08 00 00 ff ff PC 0xff0000087fef2c el3 ns=1 . 00000069: 98 00 00 LAT 0 TOT . 0000006c: 71 d1 6f 21 2c 09 00 00 00 TS 39395094481 ... Other release notes: - applies to acme's perf/{core,urgent} branches, likely elsewhere - Report is self-contained within the tool. Record requires enabling the kernel SPE driver by setting CONFIG_ARM_SPE_PMU. - The intel-bts implementation was used as a starting point; its min/default/max buffer sizes and power of 2 pages granularity need to be revisited for ARM SPE - Recording across multiple SPE clusters/domains not supported - Snapshot support (record -S), and conversion to native perf events (e.g., via 'perf inject --itrace'), are also not supported - Technically both cs-etm and spe can be used simultaneously, however disabled for simplicity in this release Signed-off-by: Kim Phillips <kim.phillips@arm.com> Reviewed-by: Dongjiu Geng <gengdongjiu@huawei.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rob Herring <robh@kernel.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wang Nan <wangnan0@huawei.com> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20180114132850.0b127434b704a26bad13268f@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-14 19:28:50 +00:00
if (!arm_spe_pmus)
arm_spe_pmus = find_all_arm_spe_pmus(&nr_spes, err);
evlist__for_each_entry(evlist, evsel) {
if (cs_etm_pmu &&
libperf: Move perf_event_attr field from perf's evsel to libperf's perf_evsel Move the perf_event_attr struct fron 'struct evsel' to 'struct perf_evsel'. Committer notes: Fixed up these: tools/perf/arch/arm/util/auxtrace.c tools/perf/arch/arm/util/cs-etm.c tools/perf/arch/arm64/util/arm-spe.c tools/perf/arch/s390/util/auxtrace.c tools/perf/util/cs-etm.c Also cc1: warnings being treated as errors tests/sample-parsing.c: In function 'do_test': tests/sample-parsing.c:162: error: missing initializer tests/sample-parsing.c:162: error: (near initialization for 'evsel.core.cpus') struct evsel evsel = { .needs_swap = false, - .core.attr = { - .sample_type = sample_type, - .read_format = read_format, + .core = { + . attr = { + .sample_type = sample_type, + .read_format = read_format, + }, [perfbuilder@a70e4eeb5549 /]$ gcc --version |& head -1 gcc (GCC) 4.4.7 Also we don't need to include perf_event.h in tools/perf/lib/include/perf/evsel.h, forward declaring 'struct perf_event_attr' is enough. And this even fixes the build in some systems where things are used somewhere down the include path from perf_event.h without defining __always_inline. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-43-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-21 11:24:29 +00:00
evsel->core.attr.type == cs_etm_pmu->type)
perf tools: Add ARM Statistical Profiling Extensions (SPE) support 'perf record' and 'perf report --dump-raw-trace' supported in this release. Example usage: # perf record -e arm_spe/ts_enable=1,pa_enable=1/ dd if=/dev/zero of=/dev/null count=10000 # perf report --dump-raw-trace Note that the perf.data file is portable, so the report can be run on another architecture host if necessary. Output will contain raw SPE data and its textual representation, such as: 0x5c8 [0x30]: PERF_RECORD_AUXTRACE size: 0x200000 offset: 0 ref: 0x1891ad0e idx: 1 tid: 2227 cpu: 1 . . ... ARM SPE data: size 2097152 bytes . 00000000: 49 00 LD . 00000002: b2 c0 3b 29 0f 00 00 ff ff VA 0xffff00000f293bc0 . 0000000b: b3 c0 eb 24 fb 00 00 00 80 PA 0xfb24ebc0 ns=1 . 00000014: 9a 00 00 LAT 0 XLAT . 00000017: 42 16 EV RETIRED L1D-ACCESS TLB-ACCESS . 00000019: b0 00 c4 15 08 00 00 ff ff PC 0xff00000815c400 el3 ns=1 . 00000022: 98 00 00 LAT 0 TOT . 00000025: 71 36 6c 21 2c 09 00 00 00 TS 39395093558 . 0000002e: 49 00 LD . 00000030: b2 80 3c 29 0f 00 00 ff ff VA 0xffff00000f293c80 . 00000039: b3 80 ec 24 fb 00 00 00 80 PA 0xfb24ec80 ns=1 . 00000042: 9a 00 00 LAT 0 XLAT . 00000045: 42 16 EV RETIRED L1D-ACCESS TLB-ACCESS . 00000047: b0 f4 11 16 08 00 00 ff ff PC 0xff0000081611f4 el3 ns=1 . 00000050: 98 00 00 LAT 0 TOT . 00000053: 71 36 6c 21 2c 09 00 00 00 TS 39395093558 . 0000005c: 48 00 INSN-OTHER . 0000005e: 42 02 EV RETIRED . 00000060: b0 2c ef 7f 08 00 00 ff ff PC 0xff0000087fef2c el3 ns=1 . 00000069: 98 00 00 LAT 0 TOT . 0000006c: 71 d1 6f 21 2c 09 00 00 00 TS 39395094481 ... Other release notes: - applies to acme's perf/{core,urgent} branches, likely elsewhere - Report is self-contained within the tool. Record requires enabling the kernel SPE driver by setting CONFIG_ARM_SPE_PMU. - The intel-bts implementation was used as a starting point; its min/default/max buffer sizes and power of 2 pages granularity need to be revisited for ARM SPE - Recording across multiple SPE clusters/domains not supported - Snapshot support (record -S), and conversion to native perf events (e.g., via 'perf inject --itrace'), are also not supported - Technically both cs-etm and spe can be used simultaneously, however disabled for simplicity in this release Signed-off-by: Kim Phillips <kim.phillips@arm.com> Reviewed-by: Dongjiu Geng <gengdongjiu@huawei.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rob Herring <robh@kernel.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wang Nan <wangnan0@huawei.com> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20180114132850.0b127434b704a26bad13268f@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-14 19:28:50 +00:00
found_etm = true;
if (!nr_spes)
continue;
for (i = 0; i < nr_spes; i++) {
libperf: Move perf_event_attr field from perf's evsel to libperf's perf_evsel Move the perf_event_attr struct fron 'struct evsel' to 'struct perf_evsel'. Committer notes: Fixed up these: tools/perf/arch/arm/util/auxtrace.c tools/perf/arch/arm/util/cs-etm.c tools/perf/arch/arm64/util/arm-spe.c tools/perf/arch/s390/util/auxtrace.c tools/perf/util/cs-etm.c Also cc1: warnings being treated as errors tests/sample-parsing.c: In function 'do_test': tests/sample-parsing.c:162: error: missing initializer tests/sample-parsing.c:162: error: (near initialization for 'evsel.core.cpus') struct evsel evsel = { .needs_swap = false, - .core.attr = { - .sample_type = sample_type, - .read_format = read_format, + .core = { + . attr = { + .sample_type = sample_type, + .read_format = read_format, + }, [perfbuilder@a70e4eeb5549 /]$ gcc --version |& head -1 gcc (GCC) 4.4.7 Also we don't need to include perf_event.h in tools/perf/lib/include/perf/evsel.h, forward declaring 'struct perf_event_attr' is enough. And this even fixes the build in some systems where things are used somewhere down the include path from perf_event.h without defining __always_inline. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-43-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-21 11:24:29 +00:00
if (evsel->core.attr.type == arm_spe_pmus[i]->type) {
perf tools: Add ARM Statistical Profiling Extensions (SPE) support 'perf record' and 'perf report --dump-raw-trace' supported in this release. Example usage: # perf record -e arm_spe/ts_enable=1,pa_enable=1/ dd if=/dev/zero of=/dev/null count=10000 # perf report --dump-raw-trace Note that the perf.data file is portable, so the report can be run on another architecture host if necessary. Output will contain raw SPE data and its textual representation, such as: 0x5c8 [0x30]: PERF_RECORD_AUXTRACE size: 0x200000 offset: 0 ref: 0x1891ad0e idx: 1 tid: 2227 cpu: 1 . . ... ARM SPE data: size 2097152 bytes . 00000000: 49 00 LD . 00000002: b2 c0 3b 29 0f 00 00 ff ff VA 0xffff00000f293bc0 . 0000000b: b3 c0 eb 24 fb 00 00 00 80 PA 0xfb24ebc0 ns=1 . 00000014: 9a 00 00 LAT 0 XLAT . 00000017: 42 16 EV RETIRED L1D-ACCESS TLB-ACCESS . 00000019: b0 00 c4 15 08 00 00 ff ff PC 0xff00000815c400 el3 ns=1 . 00000022: 98 00 00 LAT 0 TOT . 00000025: 71 36 6c 21 2c 09 00 00 00 TS 39395093558 . 0000002e: 49 00 LD . 00000030: b2 80 3c 29 0f 00 00 ff ff VA 0xffff00000f293c80 . 00000039: b3 80 ec 24 fb 00 00 00 80 PA 0xfb24ec80 ns=1 . 00000042: 9a 00 00 LAT 0 XLAT . 00000045: 42 16 EV RETIRED L1D-ACCESS TLB-ACCESS . 00000047: b0 f4 11 16 08 00 00 ff ff PC 0xff0000081611f4 el3 ns=1 . 00000050: 98 00 00 LAT 0 TOT . 00000053: 71 36 6c 21 2c 09 00 00 00 TS 39395093558 . 0000005c: 48 00 INSN-OTHER . 0000005e: 42 02 EV RETIRED . 00000060: b0 2c ef 7f 08 00 00 ff ff PC 0xff0000087fef2c el3 ns=1 . 00000069: 98 00 00 LAT 0 TOT . 0000006c: 71 d1 6f 21 2c 09 00 00 00 TS 39395094481 ... Other release notes: - applies to acme's perf/{core,urgent} branches, likely elsewhere - Report is self-contained within the tool. Record requires enabling the kernel SPE driver by setting CONFIG_ARM_SPE_PMU. - The intel-bts implementation was used as a starting point; its min/default/max buffer sizes and power of 2 pages granularity need to be revisited for ARM SPE - Recording across multiple SPE clusters/domains not supported - Snapshot support (record -S), and conversion to native perf events (e.g., via 'perf inject --itrace'), are also not supported - Technically both cs-etm and spe can be used simultaneously, however disabled for simplicity in this release Signed-off-by: Kim Phillips <kim.phillips@arm.com> Reviewed-by: Dongjiu Geng <gengdongjiu@huawei.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rob Herring <robh@kernel.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wang Nan <wangnan0@huawei.com> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20180114132850.0b127434b704a26bad13268f@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-14 19:28:50 +00:00
found_spe = true;
break;
}
}
}
perf tools: Add ARM Statistical Profiling Extensions (SPE) support 'perf record' and 'perf report --dump-raw-trace' supported in this release. Example usage: # perf record -e arm_spe/ts_enable=1,pa_enable=1/ dd if=/dev/zero of=/dev/null count=10000 # perf report --dump-raw-trace Note that the perf.data file is portable, so the report can be run on another architecture host if necessary. Output will contain raw SPE data and its textual representation, such as: 0x5c8 [0x30]: PERF_RECORD_AUXTRACE size: 0x200000 offset: 0 ref: 0x1891ad0e idx: 1 tid: 2227 cpu: 1 . . ... ARM SPE data: size 2097152 bytes . 00000000: 49 00 LD . 00000002: b2 c0 3b 29 0f 00 00 ff ff VA 0xffff00000f293bc0 . 0000000b: b3 c0 eb 24 fb 00 00 00 80 PA 0xfb24ebc0 ns=1 . 00000014: 9a 00 00 LAT 0 XLAT . 00000017: 42 16 EV RETIRED L1D-ACCESS TLB-ACCESS . 00000019: b0 00 c4 15 08 00 00 ff ff PC 0xff00000815c400 el3 ns=1 . 00000022: 98 00 00 LAT 0 TOT . 00000025: 71 36 6c 21 2c 09 00 00 00 TS 39395093558 . 0000002e: 49 00 LD . 00000030: b2 80 3c 29 0f 00 00 ff ff VA 0xffff00000f293c80 . 00000039: b3 80 ec 24 fb 00 00 00 80 PA 0xfb24ec80 ns=1 . 00000042: 9a 00 00 LAT 0 XLAT . 00000045: 42 16 EV RETIRED L1D-ACCESS TLB-ACCESS . 00000047: b0 f4 11 16 08 00 00 ff ff PC 0xff0000081611f4 el3 ns=1 . 00000050: 98 00 00 LAT 0 TOT . 00000053: 71 36 6c 21 2c 09 00 00 00 TS 39395093558 . 0000005c: 48 00 INSN-OTHER . 0000005e: 42 02 EV RETIRED . 00000060: b0 2c ef 7f 08 00 00 ff ff PC 0xff0000087fef2c el3 ns=1 . 00000069: 98 00 00 LAT 0 TOT . 0000006c: 71 d1 6f 21 2c 09 00 00 00 TS 39395094481 ... Other release notes: - applies to acme's perf/{core,urgent} branches, likely elsewhere - Report is self-contained within the tool. Record requires enabling the kernel SPE driver by setting CONFIG_ARM_SPE_PMU. - The intel-bts implementation was used as a starting point; its min/default/max buffer sizes and power of 2 pages granularity need to be revisited for ARM SPE - Recording across multiple SPE clusters/domains not supported - Snapshot support (record -S), and conversion to native perf events (e.g., via 'perf inject --itrace'), are also not supported - Technically both cs-etm and spe can be used simultaneously, however disabled for simplicity in this release Signed-off-by: Kim Phillips <kim.phillips@arm.com> Reviewed-by: Dongjiu Geng <gengdongjiu@huawei.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rob Herring <robh@kernel.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wang Nan <wangnan0@huawei.com> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20180114132850.0b127434b704a26bad13268f@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-14 19:28:50 +00:00
if (found_etm && found_spe) {
pr_err("Concurrent ARM Coresight ETM and SPE operation not currently supported\n");
*err = -EOPNOTSUPP;
return NULL;
}
if (found_etm)
return cs_etm_record_init(err);
perf tools: Add ARM Statistical Profiling Extensions (SPE) support 'perf record' and 'perf report --dump-raw-trace' supported in this release. Example usage: # perf record -e arm_spe/ts_enable=1,pa_enable=1/ dd if=/dev/zero of=/dev/null count=10000 # perf report --dump-raw-trace Note that the perf.data file is portable, so the report can be run on another architecture host if necessary. Output will contain raw SPE data and its textual representation, such as: 0x5c8 [0x30]: PERF_RECORD_AUXTRACE size: 0x200000 offset: 0 ref: 0x1891ad0e idx: 1 tid: 2227 cpu: 1 . . ... ARM SPE data: size 2097152 bytes . 00000000: 49 00 LD . 00000002: b2 c0 3b 29 0f 00 00 ff ff VA 0xffff00000f293bc0 . 0000000b: b3 c0 eb 24 fb 00 00 00 80 PA 0xfb24ebc0 ns=1 . 00000014: 9a 00 00 LAT 0 XLAT . 00000017: 42 16 EV RETIRED L1D-ACCESS TLB-ACCESS . 00000019: b0 00 c4 15 08 00 00 ff ff PC 0xff00000815c400 el3 ns=1 . 00000022: 98 00 00 LAT 0 TOT . 00000025: 71 36 6c 21 2c 09 00 00 00 TS 39395093558 . 0000002e: 49 00 LD . 00000030: b2 80 3c 29 0f 00 00 ff ff VA 0xffff00000f293c80 . 00000039: b3 80 ec 24 fb 00 00 00 80 PA 0xfb24ec80 ns=1 . 00000042: 9a 00 00 LAT 0 XLAT . 00000045: 42 16 EV RETIRED L1D-ACCESS TLB-ACCESS . 00000047: b0 f4 11 16 08 00 00 ff ff PC 0xff0000081611f4 el3 ns=1 . 00000050: 98 00 00 LAT 0 TOT . 00000053: 71 36 6c 21 2c 09 00 00 00 TS 39395093558 . 0000005c: 48 00 INSN-OTHER . 0000005e: 42 02 EV RETIRED . 00000060: b0 2c ef 7f 08 00 00 ff ff PC 0xff0000087fef2c el3 ns=1 . 00000069: 98 00 00 LAT 0 TOT . 0000006c: 71 d1 6f 21 2c 09 00 00 00 TS 39395094481 ... Other release notes: - applies to acme's perf/{core,urgent} branches, likely elsewhere - Report is self-contained within the tool. Record requires enabling the kernel SPE driver by setting CONFIG_ARM_SPE_PMU. - The intel-bts implementation was used as a starting point; its min/default/max buffer sizes and power of 2 pages granularity need to be revisited for ARM SPE - Recording across multiple SPE clusters/domains not supported - Snapshot support (record -S), and conversion to native perf events (e.g., via 'perf inject --itrace'), are also not supported - Technically both cs-etm and spe can be used simultaneously, however disabled for simplicity in this release Signed-off-by: Kim Phillips <kim.phillips@arm.com> Reviewed-by: Dongjiu Geng <gengdongjiu@huawei.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rob Herring <robh@kernel.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wang Nan <wangnan0@huawei.com> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20180114132850.0b127434b704a26bad13268f@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-14 19:28:50 +00:00
#if defined(__aarch64__)
if (found_spe)
return arm_spe_recording_init(err, arm_spe_pmus[i]);
#endif
/*
perf tools: Add ARM Statistical Profiling Extensions (SPE) support 'perf record' and 'perf report --dump-raw-trace' supported in this release. Example usage: # perf record -e arm_spe/ts_enable=1,pa_enable=1/ dd if=/dev/zero of=/dev/null count=10000 # perf report --dump-raw-trace Note that the perf.data file is portable, so the report can be run on another architecture host if necessary. Output will contain raw SPE data and its textual representation, such as: 0x5c8 [0x30]: PERF_RECORD_AUXTRACE size: 0x200000 offset: 0 ref: 0x1891ad0e idx: 1 tid: 2227 cpu: 1 . . ... ARM SPE data: size 2097152 bytes . 00000000: 49 00 LD . 00000002: b2 c0 3b 29 0f 00 00 ff ff VA 0xffff00000f293bc0 . 0000000b: b3 c0 eb 24 fb 00 00 00 80 PA 0xfb24ebc0 ns=1 . 00000014: 9a 00 00 LAT 0 XLAT . 00000017: 42 16 EV RETIRED L1D-ACCESS TLB-ACCESS . 00000019: b0 00 c4 15 08 00 00 ff ff PC 0xff00000815c400 el3 ns=1 . 00000022: 98 00 00 LAT 0 TOT . 00000025: 71 36 6c 21 2c 09 00 00 00 TS 39395093558 . 0000002e: 49 00 LD . 00000030: b2 80 3c 29 0f 00 00 ff ff VA 0xffff00000f293c80 . 00000039: b3 80 ec 24 fb 00 00 00 80 PA 0xfb24ec80 ns=1 . 00000042: 9a 00 00 LAT 0 XLAT . 00000045: 42 16 EV RETIRED L1D-ACCESS TLB-ACCESS . 00000047: b0 f4 11 16 08 00 00 ff ff PC 0xff0000081611f4 el3 ns=1 . 00000050: 98 00 00 LAT 0 TOT . 00000053: 71 36 6c 21 2c 09 00 00 00 TS 39395093558 . 0000005c: 48 00 INSN-OTHER . 0000005e: 42 02 EV RETIRED . 00000060: b0 2c ef 7f 08 00 00 ff ff PC 0xff0000087fef2c el3 ns=1 . 00000069: 98 00 00 LAT 0 TOT . 0000006c: 71 d1 6f 21 2c 09 00 00 00 TS 39395094481 ... Other release notes: - applies to acme's perf/{core,urgent} branches, likely elsewhere - Report is self-contained within the tool. Record requires enabling the kernel SPE driver by setting CONFIG_ARM_SPE_PMU. - The intel-bts implementation was used as a starting point; its min/default/max buffer sizes and power of 2 pages granularity need to be revisited for ARM SPE - Recording across multiple SPE clusters/domains not supported - Snapshot support (record -S), and conversion to native perf events (e.g., via 'perf inject --itrace'), are also not supported - Technically both cs-etm and spe can be used simultaneously, however disabled for simplicity in this release Signed-off-by: Kim Phillips <kim.phillips@arm.com> Reviewed-by: Dongjiu Geng <gengdongjiu@huawei.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rob Herring <robh@kernel.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wang Nan <wangnan0@huawei.com> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20180114132850.0b127434b704a26bad13268f@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-14 19:28:50 +00:00
* Clear 'err' even if we haven't found an event - that way perf
* record can still be used even if tracers aren't present. The NULL
* return value will take care of telling the infrastructure HW tracing
* isn't available.
*/
*err = 0;
return NULL;
}