linux/drivers/acpi/acpica/evxface.c

987 lines
28 KiB
C
Raw Normal View History

/******************************************************************************
*
* Module Name: evxface - External interfaces for ACPI events
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2011, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <linux/export.h>
#include <acpi/acpi.h>
#include "accommon.h"
#include "acnamesp.h"
#include "acevents.h"
#include "acinterp.h"
#define _COMPONENT ACPI_EVENTS
ACPI_MODULE_NAME("evxface")
/*******************************************************************************
*
* FUNCTION: acpi_install_exception_handler
*
* PARAMETERS: Handler - Pointer to the handler function for the
* event
*
* RETURN: Status
*
* DESCRIPTION: Saves the pointer to the handler function
*
******************************************************************************/
#ifdef ACPI_FUTURE_USAGE
acpi_status acpi_install_exception_handler(acpi_exception_handler handler)
{
acpi_status status;
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-21 21:15:00 +00:00
ACPI_FUNCTION_TRACE(acpi_install_exception_handler);
status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/* Don't allow two handlers. */
if (acpi_gbl_exception_handler) {
status = AE_ALREADY_EXISTS;
goto cleanup;
}
/* Install the handler */
acpi_gbl_exception_handler = handler;
cleanup:
(void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_install_exception_handler)
#endif /* ACPI_FUTURE_USAGE */
/*******************************************************************************
*
* FUNCTION: acpi_install_global_event_handler
*
* PARAMETERS: Handler - Pointer to the global event handler function
* Context - Value passed to the handler on each event
*
* RETURN: Status
*
* DESCRIPTION: Saves the pointer to the handler function. The global handler
* is invoked upon each incoming GPE and Fixed Event. It is
* invoked at interrupt level at the time of the event dispatch.
* Can be used to update event counters, etc.
*
******************************************************************************/
acpi_status
acpi_install_global_event_handler(ACPI_GBL_EVENT_HANDLER handler, void *context)
{
acpi_status status;
ACPI_FUNCTION_TRACE(acpi_install_global_event_handler);
/* Parameter validation */
if (!handler) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/* Don't allow two handlers. */
if (acpi_gbl_global_event_handler) {
status = AE_ALREADY_EXISTS;
goto cleanup;
}
acpi_gbl_global_event_handler = handler;
acpi_gbl_global_event_handler_context = context;
cleanup:
(void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_install_global_event_handler)
/*******************************************************************************
*
* FUNCTION: acpi_install_fixed_event_handler
*
* PARAMETERS: Event - Event type to enable.
* Handler - Pointer to the handler function for the
* event
* Context - Value passed to the handler on each GPE
*
* RETURN: Status
*
* DESCRIPTION: Saves the pointer to the handler function and then enables the
* event.
*
******************************************************************************/
acpi_status
acpi_install_fixed_event_handler(u32 event,
acpi_event_handler handler, void *context)
{
acpi_status status;
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-21 21:15:00 +00:00
ACPI_FUNCTION_TRACE(acpi_install_fixed_event_handler);
/* Parameter validation */
if (event > ACPI_EVENT_MAX) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/* Don't allow two handlers. */
if (NULL != acpi_gbl_fixed_event_handlers[event].handler) {
status = AE_ALREADY_EXISTS;
goto cleanup;
}
/* Install the handler before enabling the event */
acpi_gbl_fixed_event_handlers[event].handler = handler;
acpi_gbl_fixed_event_handlers[event].context = context;
status = acpi_clear_event(event);
if (ACPI_SUCCESS(status))
status = acpi_enable_event(event, 0);
if (ACPI_FAILURE(status)) {
ACPI_WARNING((AE_INFO, "Could not enable fixed event 0x%X",
[ACPI] ACPICA 20060127 Implemented support in the Resource Manager to allow unresolved namestring references within resource package objects for the _PRT method. This support is in addition to the previously implemented unresolved reference support within the AML parser. If the interpreter slack mode is enabled (true on Linux unless acpi=strict), these unresolved references will be passed through to the caller as a NULL package entry. http://bugzilla.kernel.org/show_bug.cgi?id=5741 Implemented and deployed new macros and functions for error and warning messages across the subsystem. These macros are simpler and generate less code than their predecessors. The new macros ACPI_ERROR, ACPI_EXCEPTION, ACPI_WARNING, and ACPI_INFO replace the ACPI_REPORT_* macros. Implemented the acpi_cpu_flags type to simplify host OS integration of the Acquire/Release Lock OSL interfaces. Suggested by Steven Rostedt and Andrew Morton. Fixed a problem where Alias ASL operators are sometimes not correctly resolved. causing AE_AML_INTERNAL http://bugzilla.kernel.org/show_bug.cgi?id=5189 http://bugzilla.kernel.org/show_bug.cgi?id=5674 Fixed several problems with the implementation of the ConcatenateResTemplate ASL operator. As per the ACPI specification, zero length buffers are now treated as a single EndTag. One-length buffers always cause a fatal exception. Non-zero length buffers that do not end with a full 2-byte EndTag cause a fatal exception. Fixed a possible structure overwrite in the AcpiGetObjectInfo external interface. (With assistance from Thomas Renninger) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-01-27 21:43:00 +00:00
event));
/* Remove the handler */
acpi_gbl_fixed_event_handlers[event].handler = NULL;
acpi_gbl_fixed_event_handlers[event].context = NULL;
} else {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Enabled fixed event %X, Handler=%p\n", event,
handler));
}
cleanup:
(void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_install_fixed_event_handler)
/*******************************************************************************
*
* FUNCTION: acpi_remove_fixed_event_handler
*
* PARAMETERS: Event - Event type to disable.
* Handler - Address of the handler
*
* RETURN: Status
*
* DESCRIPTION: Disables the event and unregisters the event handler.
*
******************************************************************************/
acpi_status
acpi_remove_fixed_event_handler(u32 event, acpi_event_handler handler)
{
acpi_status status = AE_OK;
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-21 21:15:00 +00:00
ACPI_FUNCTION_TRACE(acpi_remove_fixed_event_handler);
/* Parameter validation */
if (event > ACPI_EVENT_MAX) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/* Disable the event before removing the handler */
status = acpi_disable_event(event, 0);
/* Always Remove the handler */
acpi_gbl_fixed_event_handlers[event].handler = NULL;
acpi_gbl_fixed_event_handlers[event].context = NULL;
if (ACPI_FAILURE(status)) {
[ACPI] ACPICA 20060127 Implemented support in the Resource Manager to allow unresolved namestring references within resource package objects for the _PRT method. This support is in addition to the previously implemented unresolved reference support within the AML parser. If the interpreter slack mode is enabled (true on Linux unless acpi=strict), these unresolved references will be passed through to the caller as a NULL package entry. http://bugzilla.kernel.org/show_bug.cgi?id=5741 Implemented and deployed new macros and functions for error and warning messages across the subsystem. These macros are simpler and generate less code than their predecessors. The new macros ACPI_ERROR, ACPI_EXCEPTION, ACPI_WARNING, and ACPI_INFO replace the ACPI_REPORT_* macros. Implemented the acpi_cpu_flags type to simplify host OS integration of the Acquire/Release Lock OSL interfaces. Suggested by Steven Rostedt and Andrew Morton. Fixed a problem where Alias ASL operators are sometimes not correctly resolved. causing AE_AML_INTERNAL http://bugzilla.kernel.org/show_bug.cgi?id=5189 http://bugzilla.kernel.org/show_bug.cgi?id=5674 Fixed several problems with the implementation of the ConcatenateResTemplate ASL operator. As per the ACPI specification, zero length buffers are now treated as a single EndTag. One-length buffers always cause a fatal exception. Non-zero length buffers that do not end with a full 2-byte EndTag cause a fatal exception. Fixed a possible structure overwrite in the AcpiGetObjectInfo external interface. (With assistance from Thomas Renninger) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-01-27 21:43:00 +00:00
ACPI_WARNING((AE_INFO,
"Could not write to fixed event enable register 0x%X",
[ACPI] ACPICA 20060127 Implemented support in the Resource Manager to allow unresolved namestring references within resource package objects for the _PRT method. This support is in addition to the previously implemented unresolved reference support within the AML parser. If the interpreter slack mode is enabled (true on Linux unless acpi=strict), these unresolved references will be passed through to the caller as a NULL package entry. http://bugzilla.kernel.org/show_bug.cgi?id=5741 Implemented and deployed new macros and functions for error and warning messages across the subsystem. These macros are simpler and generate less code than their predecessors. The new macros ACPI_ERROR, ACPI_EXCEPTION, ACPI_WARNING, and ACPI_INFO replace the ACPI_REPORT_* macros. Implemented the acpi_cpu_flags type to simplify host OS integration of the Acquire/Release Lock OSL interfaces. Suggested by Steven Rostedt and Andrew Morton. Fixed a problem where Alias ASL operators are sometimes not correctly resolved. causing AE_AML_INTERNAL http://bugzilla.kernel.org/show_bug.cgi?id=5189 http://bugzilla.kernel.org/show_bug.cgi?id=5674 Fixed several problems with the implementation of the ConcatenateResTemplate ASL operator. As per the ACPI specification, zero length buffers are now treated as a single EndTag. One-length buffers always cause a fatal exception. Non-zero length buffers that do not end with a full 2-byte EndTag cause a fatal exception. Fixed a possible structure overwrite in the AcpiGetObjectInfo external interface. (With assistance from Thomas Renninger) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-01-27 21:43:00 +00:00
event));
} else {
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Disabled fixed event %X\n",
event));
}
(void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_remove_fixed_event_handler)
/*******************************************************************************
*
* FUNCTION: acpi_populate_handler_object
*
* PARAMETERS: handler_obj - Handler object to populate
* handler_type - The type of handler:
* ACPI_SYSTEM_NOTIFY: system_handler (00-7f)
* ACPI_DEVICE_NOTIFY: driver_handler (80-ff)
* ACPI_ALL_NOTIFY: both system and device
* handler - Address of the handler
* context - Value passed to the handler on each GPE
* next - Address of a handler object to link to
*
* RETURN: None
*
* DESCRIPTION: Populate a handler object.
*
******************************************************************************/
static void
acpi_populate_handler_object(struct acpi_object_notify_handler *handler_obj,
u32 handler_type,
acpi_notify_handler handler, void *context,
struct acpi_object_notify_handler *next)
{
handler_obj->handler_type = handler_type;
handler_obj->handler = handler;
handler_obj->context = context;
handler_obj->next = next;
}
/*******************************************************************************
*
* FUNCTION: acpi_add_handler_object
*
* PARAMETERS: parent_obj - Parent of the new object
* handler - Address of the handler
* context - Value passed to the handler on each GPE
*
* RETURN: Status
*
* DESCRIPTION: Create a new handler object and populate it.
*
******************************************************************************/
static acpi_status
acpi_add_handler_object(struct acpi_object_notify_handler *parent_obj,
acpi_notify_handler handler, void *context)
{
struct acpi_object_notify_handler *handler_obj;
/* The parent must not be a defice notify handler object. */
if (parent_obj->handler_type & ACPI_DEVICE_NOTIFY)
return AE_BAD_PARAMETER;
handler_obj = ACPI_ALLOCATE_ZEROED(sizeof(*handler_obj));
if (!handler_obj)
return AE_NO_MEMORY;
acpi_populate_handler_object(handler_obj,
ACPI_SYSTEM_NOTIFY,
handler, context,
parent_obj->next);
parent_obj->next = handler_obj;
return AE_OK;
}
/*******************************************************************************
*
* FUNCTION: acpi_install_notify_handler
*
* PARAMETERS: Device - The device for which notifies will be handled
* handler_type - The type of handler:
* ACPI_SYSTEM_NOTIFY: system_handler (00-7f)
* ACPI_DEVICE_NOTIFY: driver_handler (80-ff)
* ACPI_ALL_NOTIFY: both system and device
* Handler - Address of the handler
* Context - Value passed to the handler on each GPE
*
* RETURN: Status
*
* DESCRIPTION: Install a handler for notifies on an ACPI device
*
******************************************************************************/
acpi_status
acpi_install_notify_handler(acpi_handle device,
u32 handler_type,
acpi_notify_handler handler, void *context)
{
union acpi_operand_object *obj_desc;
union acpi_operand_object *notify_obj;
struct acpi_namespace_node *node;
acpi_status status;
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-21 21:15:00 +00:00
ACPI_FUNCTION_TRACE(acpi_install_notify_handler);
/* Parameter validation */
if ((!device) ||
(!handler) || (handler_type > ACPI_MAX_NOTIFY_HANDLER_TYPE)) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/* Convert and validate the device handle */
node = acpi_ns_validate_handle(device);
if (!node) {
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
/*
* Root Object:
* Registering a notify handler on the root object indicates that the
* caller wishes to receive notifications for all objects. Note that
* only one <external> global handler can be regsitered (per notify type).
*/
if (device == ACPI_ROOT_OBJECT) {
/* Make sure the handler is not already installed */
if (((handler_type & ACPI_SYSTEM_NOTIFY) &&
acpi_gbl_system_notify.handler) ||
((handler_type & ACPI_DEVICE_NOTIFY) &&
acpi_gbl_device_notify.handler)) {
status = AE_ALREADY_EXISTS;
goto unlock_and_exit;
}
if (handler_type & ACPI_SYSTEM_NOTIFY) {
acpi_gbl_system_notify.node = node;
acpi_gbl_system_notify.handler = handler;
acpi_gbl_system_notify.context = context;
}
if (handler_type & ACPI_DEVICE_NOTIFY) {
acpi_gbl_device_notify.node = node;
acpi_gbl_device_notify.handler = handler;
acpi_gbl_device_notify.context = context;
}
/* Global notify handler installed */
}
/*
* All Other Objects:
* Caller will only receive notifications specific to the target object.
* Note that only certain object types can receive notifications.
*/
else {
/* Notifies allowed on this object? */
if (!acpi_ev_is_notify_object(node)) {
status = AE_TYPE;
goto unlock_and_exit;
}
/* Check for an existing internal object */
obj_desc = acpi_ns_get_attached_object(node);
if (obj_desc) {
/* Object exists. */
/* For a device notify, make sure there's no handler. */
if ((handler_type & ACPI_DEVICE_NOTIFY) &&
obj_desc->common_notify.device_notify) {
status = AE_ALREADY_EXISTS;
goto unlock_and_exit;
}
/* System notifies may have more handlers installed. */
notify_obj = obj_desc->common_notify.system_notify;
if ((handler_type & ACPI_SYSTEM_NOTIFY) && notify_obj) {
struct acpi_object_notify_handler *parent_obj;
if (handler_type & ACPI_DEVICE_NOTIFY) {
status = AE_ALREADY_EXISTS;
goto unlock_and_exit;
}
parent_obj = &notify_obj->notify;
status = acpi_add_handler_object(parent_obj,
handler,
context);
goto unlock_and_exit;
}
} else {
/* Create a new object */
obj_desc = acpi_ut_create_internal_object(node->type);
if (!obj_desc) {
status = AE_NO_MEMORY;
goto unlock_and_exit;
}
/* Attach new object to the Node */
status =
acpi_ns_attach_object(device, obj_desc, node->type);
/* Remove local reference to the object */
acpi_ut_remove_reference(obj_desc);
if (ACPI_FAILURE(status)) {
goto unlock_and_exit;
}
}
/* Install the handler */
notify_obj =
acpi_ut_create_internal_object(ACPI_TYPE_LOCAL_NOTIFY);
if (!notify_obj) {
status = AE_NO_MEMORY;
goto unlock_and_exit;
}
acpi_populate_handler_object(&notify_obj->notify,
handler_type,
handler, context,
NULL);
if (handler_type & ACPI_SYSTEM_NOTIFY) {
obj_desc->common_notify.system_notify = notify_obj;
}
if (handler_type & ACPI_DEVICE_NOTIFY) {
obj_desc->common_notify.device_notify = notify_obj;
}
if (handler_type == ACPI_ALL_NOTIFY) {
/* Extra ref if installed in both */
acpi_ut_add_reference(notify_obj);
}
}
unlock_and_exit:
(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_install_notify_handler)
/*******************************************************************************
*
* FUNCTION: acpi_remove_notify_handler
*
* PARAMETERS: Device - The device for which notifies will be handled
* handler_type - The type of handler:
* ACPI_SYSTEM_NOTIFY: system_handler (00-7f)
* ACPI_DEVICE_NOTIFY: driver_handler (80-ff)
* ACPI_ALL_NOTIFY: both system and device
* Handler - Address of the handler
*
* RETURN: Status
*
* DESCRIPTION: Remove a handler for notifies on an ACPI device
*
******************************************************************************/
acpi_status
acpi_remove_notify_handler(acpi_handle device,
u32 handler_type, acpi_notify_handler handler)
{
union acpi_operand_object *notify_obj;
union acpi_operand_object *obj_desc;
struct acpi_namespace_node *node;
acpi_status status;
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-21 21:15:00 +00:00
ACPI_FUNCTION_TRACE(acpi_remove_notify_handler);
/* Parameter validation */
if ((!device) ||
(!handler) || (handler_type > ACPI_MAX_NOTIFY_HANDLER_TYPE)) {
status = AE_BAD_PARAMETER;
goto exit;
}
/* Make sure all deferred tasks are completed */
acpi_os_wait_events_complete(NULL);
status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
goto exit;
}
/* Convert and validate the device handle */
node = acpi_ns_validate_handle(device);
if (!node) {
status = AE_BAD_PARAMETER;
ACPI: ACPICA 20060707 Added the ACPI_PACKED_POINTERS_NOT_SUPPORTED macro to support C compilers that do not allow the initialization of address pointers within packed structures - even though the hardware itself may support misaligned transfers. Some of the debug data structures are packed by default to minimize size. Added an error message for the case where acpi_os_get_thread_id() returns zero. A non-zero value is required by the core ACPICA code to ensure the proper operation of AML mutexes and recursive control methods. The DSDT is now the only ACPI table that determines whether the AML interpreter is in 32-bit or 64-bit mode. Not really a functional change, but the hooks for per-table 32/64 switching have been removed from the code. A clarification to the ACPI specification is forthcoming in ACPI 3.0B. Fixed a possible leak of an Owner ID in the error path of tbinstal.c acpi_tb_init_table_descriptor() and migrated all table OwnerID deletion to a single place in acpi_tb_uninstall_table() to correct possible leaks when using the acpi_tb_delete_tables_by_type() interface (with assistance from Lance Ortiz.) Fixed a problem with Serialized control methods where the semaphore associated with the method could be over-signaled after multiple method invocations. Fixed two issues with the locking of the internal namespace data structure. Both the Unload() operator and acpi_unload_table() interface now lock the namespace during the namespace deletion associated with the table unload (with assistance from Linn Crosetto.) Fixed problem reports (Valery Podrezov) integrated: - Eliminate unnecessary memory allocation for CreateXxxxField http://bugzilla.kernel.org/show_bug.cgi?id=5426 Fixed problem reports (Fiodor Suietov) integrated: - Incomplete cleanup branches in AcpiTbGetTableRsdt (BZ 369) - On Address Space handler deletion, needless deactivation call (BZ 374) - AcpiRemoveAddressSpaceHandler: validate Device handle parameter (BZ 375) - Possible memory leak, Notify sub-objects of Processor, Power, ThermalZone (BZ 376) - AcpiRemoveAddressSpaceHandler: validate Handler parameter (BZ 378) - Minimum Length of RSDT should be validated (BZ 379) - AcpiRemoveNotifyHandler: return AE_NOT_EXIST if Processor Obj has no Handler (BZ (380) - AcpiUnloadTable: return AE_NOT_EXIST if no table of specified type loaded (BZ 381) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-07-08 00:44:38 +00:00
goto unlock_and_exit;
}
/* Root Object */
if (device == ACPI_ROOT_OBJECT) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Removing notify handler for namespace root object\n"));
if (((handler_type & ACPI_SYSTEM_NOTIFY) &&
!acpi_gbl_system_notify.handler) ||
((handler_type & ACPI_DEVICE_NOTIFY) &&
!acpi_gbl_device_notify.handler)) {
status = AE_NOT_EXIST;
ACPI: ACPICA 20060707 Added the ACPI_PACKED_POINTERS_NOT_SUPPORTED macro to support C compilers that do not allow the initialization of address pointers within packed structures - even though the hardware itself may support misaligned transfers. Some of the debug data structures are packed by default to minimize size. Added an error message for the case where acpi_os_get_thread_id() returns zero. A non-zero value is required by the core ACPICA code to ensure the proper operation of AML mutexes and recursive control methods. The DSDT is now the only ACPI table that determines whether the AML interpreter is in 32-bit or 64-bit mode. Not really a functional change, but the hooks for per-table 32/64 switching have been removed from the code. A clarification to the ACPI specification is forthcoming in ACPI 3.0B. Fixed a possible leak of an Owner ID in the error path of tbinstal.c acpi_tb_init_table_descriptor() and migrated all table OwnerID deletion to a single place in acpi_tb_uninstall_table() to correct possible leaks when using the acpi_tb_delete_tables_by_type() interface (with assistance from Lance Ortiz.) Fixed a problem with Serialized control methods where the semaphore associated with the method could be over-signaled after multiple method invocations. Fixed two issues with the locking of the internal namespace data structure. Both the Unload() operator and acpi_unload_table() interface now lock the namespace during the namespace deletion associated with the table unload (with assistance from Linn Crosetto.) Fixed problem reports (Valery Podrezov) integrated: - Eliminate unnecessary memory allocation for CreateXxxxField http://bugzilla.kernel.org/show_bug.cgi?id=5426 Fixed problem reports (Fiodor Suietov) integrated: - Incomplete cleanup branches in AcpiTbGetTableRsdt (BZ 369) - On Address Space handler deletion, needless deactivation call (BZ 374) - AcpiRemoveAddressSpaceHandler: validate Device handle parameter (BZ 375) - Possible memory leak, Notify sub-objects of Processor, Power, ThermalZone (BZ 376) - AcpiRemoveAddressSpaceHandler: validate Handler parameter (BZ 378) - Minimum Length of RSDT should be validated (BZ 379) - AcpiRemoveNotifyHandler: return AE_NOT_EXIST if Processor Obj has no Handler (BZ (380) - AcpiUnloadTable: return AE_NOT_EXIST if no table of specified type loaded (BZ 381) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-07-08 00:44:38 +00:00
goto unlock_and_exit;
}
if (handler_type & ACPI_SYSTEM_NOTIFY) {
acpi_gbl_system_notify.node = NULL;
acpi_gbl_system_notify.handler = NULL;
acpi_gbl_system_notify.context = NULL;
}
if (handler_type & ACPI_DEVICE_NOTIFY) {
acpi_gbl_device_notify.node = NULL;
acpi_gbl_device_notify.handler = NULL;
acpi_gbl_device_notify.context = NULL;
}
}
/* All Other Objects */
else {
/* Notifies allowed on this object? */
if (!acpi_ev_is_notify_object(node)) {
status = AE_TYPE;
ACPI: ACPICA 20060707 Added the ACPI_PACKED_POINTERS_NOT_SUPPORTED macro to support C compilers that do not allow the initialization of address pointers within packed structures - even though the hardware itself may support misaligned transfers. Some of the debug data structures are packed by default to minimize size. Added an error message for the case where acpi_os_get_thread_id() returns zero. A non-zero value is required by the core ACPICA code to ensure the proper operation of AML mutexes and recursive control methods. The DSDT is now the only ACPI table that determines whether the AML interpreter is in 32-bit or 64-bit mode. Not really a functional change, but the hooks for per-table 32/64 switching have been removed from the code. A clarification to the ACPI specification is forthcoming in ACPI 3.0B. Fixed a possible leak of an Owner ID in the error path of tbinstal.c acpi_tb_init_table_descriptor() and migrated all table OwnerID deletion to a single place in acpi_tb_uninstall_table() to correct possible leaks when using the acpi_tb_delete_tables_by_type() interface (with assistance from Lance Ortiz.) Fixed a problem with Serialized control methods where the semaphore associated with the method could be over-signaled after multiple method invocations. Fixed two issues with the locking of the internal namespace data structure. Both the Unload() operator and acpi_unload_table() interface now lock the namespace during the namespace deletion associated with the table unload (with assistance from Linn Crosetto.) Fixed problem reports (Valery Podrezov) integrated: - Eliminate unnecessary memory allocation for CreateXxxxField http://bugzilla.kernel.org/show_bug.cgi?id=5426 Fixed problem reports (Fiodor Suietov) integrated: - Incomplete cleanup branches in AcpiTbGetTableRsdt (BZ 369) - On Address Space handler deletion, needless deactivation call (BZ 374) - AcpiRemoveAddressSpaceHandler: validate Device handle parameter (BZ 375) - Possible memory leak, Notify sub-objects of Processor, Power, ThermalZone (BZ 376) - AcpiRemoveAddressSpaceHandler: validate Handler parameter (BZ 378) - Minimum Length of RSDT should be validated (BZ 379) - AcpiRemoveNotifyHandler: return AE_NOT_EXIST if Processor Obj has no Handler (BZ (380) - AcpiUnloadTable: return AE_NOT_EXIST if no table of specified type loaded (BZ 381) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-07-08 00:44:38 +00:00
goto unlock_and_exit;
}
/* Check for an existing internal object */
obj_desc = acpi_ns_get_attached_object(node);
if (!obj_desc) {
status = AE_NOT_EXIST;
ACPI: ACPICA 20060707 Added the ACPI_PACKED_POINTERS_NOT_SUPPORTED macro to support C compilers that do not allow the initialization of address pointers within packed structures - even though the hardware itself may support misaligned transfers. Some of the debug data structures are packed by default to minimize size. Added an error message for the case where acpi_os_get_thread_id() returns zero. A non-zero value is required by the core ACPICA code to ensure the proper operation of AML mutexes and recursive control methods. The DSDT is now the only ACPI table that determines whether the AML interpreter is in 32-bit or 64-bit mode. Not really a functional change, but the hooks for per-table 32/64 switching have been removed from the code. A clarification to the ACPI specification is forthcoming in ACPI 3.0B. Fixed a possible leak of an Owner ID in the error path of tbinstal.c acpi_tb_init_table_descriptor() and migrated all table OwnerID deletion to a single place in acpi_tb_uninstall_table() to correct possible leaks when using the acpi_tb_delete_tables_by_type() interface (with assistance from Lance Ortiz.) Fixed a problem with Serialized control methods where the semaphore associated with the method could be over-signaled after multiple method invocations. Fixed two issues with the locking of the internal namespace data structure. Both the Unload() operator and acpi_unload_table() interface now lock the namespace during the namespace deletion associated with the table unload (with assistance from Linn Crosetto.) Fixed problem reports (Valery Podrezov) integrated: - Eliminate unnecessary memory allocation for CreateXxxxField http://bugzilla.kernel.org/show_bug.cgi?id=5426 Fixed problem reports (Fiodor Suietov) integrated: - Incomplete cleanup branches in AcpiTbGetTableRsdt (BZ 369) - On Address Space handler deletion, needless deactivation call (BZ 374) - AcpiRemoveAddressSpaceHandler: validate Device handle parameter (BZ 375) - Possible memory leak, Notify sub-objects of Processor, Power, ThermalZone (BZ 376) - AcpiRemoveAddressSpaceHandler: validate Handler parameter (BZ 378) - Minimum Length of RSDT should be validated (BZ 379) - AcpiRemoveNotifyHandler: return AE_NOT_EXIST if Processor Obj has no Handler (BZ (380) - AcpiUnloadTable: return AE_NOT_EXIST if no table of specified type loaded (BZ 381) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-07-08 00:44:38 +00:00
goto unlock_and_exit;
}
/* Object exists - make sure there's an existing handler */
if (handler_type & ACPI_SYSTEM_NOTIFY) {
struct acpi_object_notify_handler *handler_obj;
struct acpi_object_notify_handler *parent_obj;
notify_obj = obj_desc->common_notify.system_notify;
ACPI: ACPICA 20060707 Added the ACPI_PACKED_POINTERS_NOT_SUPPORTED macro to support C compilers that do not allow the initialization of address pointers within packed structures - even though the hardware itself may support misaligned transfers. Some of the debug data structures are packed by default to minimize size. Added an error message for the case where acpi_os_get_thread_id() returns zero. A non-zero value is required by the core ACPICA code to ensure the proper operation of AML mutexes and recursive control methods. The DSDT is now the only ACPI table that determines whether the AML interpreter is in 32-bit or 64-bit mode. Not really a functional change, but the hooks for per-table 32/64 switching have been removed from the code. A clarification to the ACPI specification is forthcoming in ACPI 3.0B. Fixed a possible leak of an Owner ID in the error path of tbinstal.c acpi_tb_init_table_descriptor() and migrated all table OwnerID deletion to a single place in acpi_tb_uninstall_table() to correct possible leaks when using the acpi_tb_delete_tables_by_type() interface (with assistance from Lance Ortiz.) Fixed a problem with Serialized control methods where the semaphore associated with the method could be over-signaled after multiple method invocations. Fixed two issues with the locking of the internal namespace data structure. Both the Unload() operator and acpi_unload_table() interface now lock the namespace during the namespace deletion associated with the table unload (with assistance from Linn Crosetto.) Fixed problem reports (Valery Podrezov) integrated: - Eliminate unnecessary memory allocation for CreateXxxxField http://bugzilla.kernel.org/show_bug.cgi?id=5426 Fixed problem reports (Fiodor Suietov) integrated: - Incomplete cleanup branches in AcpiTbGetTableRsdt (BZ 369) - On Address Space handler deletion, needless deactivation call (BZ 374) - AcpiRemoveAddressSpaceHandler: validate Device handle parameter (BZ 375) - Possible memory leak, Notify sub-objects of Processor, Power, ThermalZone (BZ 376) - AcpiRemoveAddressSpaceHandler: validate Handler parameter (BZ 378) - Minimum Length of RSDT should be validated (BZ 379) - AcpiRemoveNotifyHandler: return AE_NOT_EXIST if Processor Obj has no Handler (BZ (380) - AcpiUnloadTable: return AE_NOT_EXIST if no table of specified type loaded (BZ 381) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-07-08 00:44:38 +00:00
if (!notify_obj) {
status = AE_NOT_EXIST;
goto unlock_and_exit;
}
handler_obj = &notify_obj->notify;
parent_obj = NULL;
while (handler_obj->handler != handler) {
if (handler_obj->next) {
parent_obj = handler_obj;
handler_obj = handler_obj->next;
} else {
break;
}
}
if (handler_obj->handler != handler) {
status = AE_BAD_PARAMETER;
ACPI: ACPICA 20060707 Added the ACPI_PACKED_POINTERS_NOT_SUPPORTED macro to support C compilers that do not allow the initialization of address pointers within packed structures - even though the hardware itself may support misaligned transfers. Some of the debug data structures are packed by default to minimize size. Added an error message for the case where acpi_os_get_thread_id() returns zero. A non-zero value is required by the core ACPICA code to ensure the proper operation of AML mutexes and recursive control methods. The DSDT is now the only ACPI table that determines whether the AML interpreter is in 32-bit or 64-bit mode. Not really a functional change, but the hooks for per-table 32/64 switching have been removed from the code. A clarification to the ACPI specification is forthcoming in ACPI 3.0B. Fixed a possible leak of an Owner ID in the error path of tbinstal.c acpi_tb_init_table_descriptor() and migrated all table OwnerID deletion to a single place in acpi_tb_uninstall_table() to correct possible leaks when using the acpi_tb_delete_tables_by_type() interface (with assistance from Lance Ortiz.) Fixed a problem with Serialized control methods where the semaphore associated with the method could be over-signaled after multiple method invocations. Fixed two issues with the locking of the internal namespace data structure. Both the Unload() operator and acpi_unload_table() interface now lock the namespace during the namespace deletion associated with the table unload (with assistance from Linn Crosetto.) Fixed problem reports (Valery Podrezov) integrated: - Eliminate unnecessary memory allocation for CreateXxxxField http://bugzilla.kernel.org/show_bug.cgi?id=5426 Fixed problem reports (Fiodor Suietov) integrated: - Incomplete cleanup branches in AcpiTbGetTableRsdt (BZ 369) - On Address Space handler deletion, needless deactivation call (BZ 374) - AcpiRemoveAddressSpaceHandler: validate Device handle parameter (BZ 375) - Possible memory leak, Notify sub-objects of Processor, Power, ThermalZone (BZ 376) - AcpiRemoveAddressSpaceHandler: validate Handler parameter (BZ 378) - Minimum Length of RSDT should be validated (BZ 379) - AcpiRemoveNotifyHandler: return AE_NOT_EXIST if Processor Obj has no Handler (BZ (380) - AcpiUnloadTable: return AE_NOT_EXIST if no table of specified type loaded (BZ 381) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-07-08 00:44:38 +00:00
goto unlock_and_exit;
}
/*
* Remove the handler. There are three possible cases.
* First, we may need to remove a non-embedded object.
* Second, we may need to remove the embedded object's
* handler data, while non-embedded objects exist.
* Finally, we may need to remove the embedded object
* entirely along with its container.
*/
if (parent_obj) {
/* Non-embedded object is being removed. */
parent_obj->next = handler_obj->next;
ACPI_FREE(handler_obj);
} else if (notify_obj->notify.next) {
/*
* The handler matches the embedded object, but
* there are more handler objects in the list.
* Replace the embedded object's data with the
* first next object's data and remove that
* object.
*/
parent_obj = &notify_obj->notify;
handler_obj = notify_obj->notify.next;
*parent_obj = *handler_obj;
ACPI_FREE(handler_obj);
} else {
/* No more handler objects in the list. */
obj_desc->common_notify.system_notify = NULL;
acpi_ut_remove_reference(notify_obj);
}
}
if (handler_type & ACPI_DEVICE_NOTIFY) {
notify_obj = obj_desc->common_notify.device_notify;
ACPI: ACPICA 20060707 Added the ACPI_PACKED_POINTERS_NOT_SUPPORTED macro to support C compilers that do not allow the initialization of address pointers within packed structures - even though the hardware itself may support misaligned transfers. Some of the debug data structures are packed by default to minimize size. Added an error message for the case where acpi_os_get_thread_id() returns zero. A non-zero value is required by the core ACPICA code to ensure the proper operation of AML mutexes and recursive control methods. The DSDT is now the only ACPI table that determines whether the AML interpreter is in 32-bit or 64-bit mode. Not really a functional change, but the hooks for per-table 32/64 switching have been removed from the code. A clarification to the ACPI specification is forthcoming in ACPI 3.0B. Fixed a possible leak of an Owner ID in the error path of tbinstal.c acpi_tb_init_table_descriptor() and migrated all table OwnerID deletion to a single place in acpi_tb_uninstall_table() to correct possible leaks when using the acpi_tb_delete_tables_by_type() interface (with assistance from Lance Ortiz.) Fixed a problem with Serialized control methods where the semaphore associated with the method could be over-signaled after multiple method invocations. Fixed two issues with the locking of the internal namespace data structure. Both the Unload() operator and acpi_unload_table() interface now lock the namespace during the namespace deletion associated with the table unload (with assistance from Linn Crosetto.) Fixed problem reports (Valery Podrezov) integrated: - Eliminate unnecessary memory allocation for CreateXxxxField http://bugzilla.kernel.org/show_bug.cgi?id=5426 Fixed problem reports (Fiodor Suietov) integrated: - Incomplete cleanup branches in AcpiTbGetTableRsdt (BZ 369) - On Address Space handler deletion, needless deactivation call (BZ 374) - AcpiRemoveAddressSpaceHandler: validate Device handle parameter (BZ 375) - Possible memory leak, Notify sub-objects of Processor, Power, ThermalZone (BZ 376) - AcpiRemoveAddressSpaceHandler: validate Handler parameter (BZ 378) - Minimum Length of RSDT should be validated (BZ 379) - AcpiRemoveNotifyHandler: return AE_NOT_EXIST if Processor Obj has no Handler (BZ (380) - AcpiUnloadTable: return AE_NOT_EXIST if no table of specified type loaded (BZ 381) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-07-08 00:44:38 +00:00
if (!notify_obj) {
status = AE_NOT_EXIST;
goto unlock_and_exit;
}
if (notify_obj->notify.handler != handler) {
status = AE_BAD_PARAMETER;
ACPI: ACPICA 20060707 Added the ACPI_PACKED_POINTERS_NOT_SUPPORTED macro to support C compilers that do not allow the initialization of address pointers within packed structures - even though the hardware itself may support misaligned transfers. Some of the debug data structures are packed by default to minimize size. Added an error message for the case where acpi_os_get_thread_id() returns zero. A non-zero value is required by the core ACPICA code to ensure the proper operation of AML mutexes and recursive control methods. The DSDT is now the only ACPI table that determines whether the AML interpreter is in 32-bit or 64-bit mode. Not really a functional change, but the hooks for per-table 32/64 switching have been removed from the code. A clarification to the ACPI specification is forthcoming in ACPI 3.0B. Fixed a possible leak of an Owner ID in the error path of tbinstal.c acpi_tb_init_table_descriptor() and migrated all table OwnerID deletion to a single place in acpi_tb_uninstall_table() to correct possible leaks when using the acpi_tb_delete_tables_by_type() interface (with assistance from Lance Ortiz.) Fixed a problem with Serialized control methods where the semaphore associated with the method could be over-signaled after multiple method invocations. Fixed two issues with the locking of the internal namespace data structure. Both the Unload() operator and acpi_unload_table() interface now lock the namespace during the namespace deletion associated with the table unload (with assistance from Linn Crosetto.) Fixed problem reports (Valery Podrezov) integrated: - Eliminate unnecessary memory allocation for CreateXxxxField http://bugzilla.kernel.org/show_bug.cgi?id=5426 Fixed problem reports (Fiodor Suietov) integrated: - Incomplete cleanup branches in AcpiTbGetTableRsdt (BZ 369) - On Address Space handler deletion, needless deactivation call (BZ 374) - AcpiRemoveAddressSpaceHandler: validate Device handle parameter (BZ 375) - Possible memory leak, Notify sub-objects of Processor, Power, ThermalZone (BZ 376) - AcpiRemoveAddressSpaceHandler: validate Handler parameter (BZ 378) - Minimum Length of RSDT should be validated (BZ 379) - AcpiRemoveNotifyHandler: return AE_NOT_EXIST if Processor Obj has no Handler (BZ (380) - AcpiUnloadTable: return AE_NOT_EXIST if no table of specified type loaded (BZ 381) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-07-08 00:44:38 +00:00
goto unlock_and_exit;
}
/* Remove the handler */
obj_desc->common_notify.device_notify = NULL;
acpi_ut_remove_reference(notify_obj);
}
}
ACPI: ACPICA 20060707 Added the ACPI_PACKED_POINTERS_NOT_SUPPORTED macro to support C compilers that do not allow the initialization of address pointers within packed structures - even though the hardware itself may support misaligned transfers. Some of the debug data structures are packed by default to minimize size. Added an error message for the case where acpi_os_get_thread_id() returns zero. A non-zero value is required by the core ACPICA code to ensure the proper operation of AML mutexes and recursive control methods. The DSDT is now the only ACPI table that determines whether the AML interpreter is in 32-bit or 64-bit mode. Not really a functional change, but the hooks for per-table 32/64 switching have been removed from the code. A clarification to the ACPI specification is forthcoming in ACPI 3.0B. Fixed a possible leak of an Owner ID in the error path of tbinstal.c acpi_tb_init_table_descriptor() and migrated all table OwnerID deletion to a single place in acpi_tb_uninstall_table() to correct possible leaks when using the acpi_tb_delete_tables_by_type() interface (with assistance from Lance Ortiz.) Fixed a problem with Serialized control methods where the semaphore associated with the method could be over-signaled after multiple method invocations. Fixed two issues with the locking of the internal namespace data structure. Both the Unload() operator and acpi_unload_table() interface now lock the namespace during the namespace deletion associated with the table unload (with assistance from Linn Crosetto.) Fixed problem reports (Valery Podrezov) integrated: - Eliminate unnecessary memory allocation for CreateXxxxField http://bugzilla.kernel.org/show_bug.cgi?id=5426 Fixed problem reports (Fiodor Suietov) integrated: - Incomplete cleanup branches in AcpiTbGetTableRsdt (BZ 369) - On Address Space handler deletion, needless deactivation call (BZ 374) - AcpiRemoveAddressSpaceHandler: validate Device handle parameter (BZ 375) - Possible memory leak, Notify sub-objects of Processor, Power, ThermalZone (BZ 376) - AcpiRemoveAddressSpaceHandler: validate Handler parameter (BZ 378) - Minimum Length of RSDT should be validated (BZ 379) - AcpiRemoveNotifyHandler: return AE_NOT_EXIST if Processor Obj has no Handler (BZ (380) - AcpiUnloadTable: return AE_NOT_EXIST if no table of specified type loaded (BZ 381) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-07-08 00:44:38 +00:00
unlock_and_exit:
(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
ACPI: ACPICA 20060707 Added the ACPI_PACKED_POINTERS_NOT_SUPPORTED macro to support C compilers that do not allow the initialization of address pointers within packed structures - even though the hardware itself may support misaligned transfers. Some of the debug data structures are packed by default to minimize size. Added an error message for the case where acpi_os_get_thread_id() returns zero. A non-zero value is required by the core ACPICA code to ensure the proper operation of AML mutexes and recursive control methods. The DSDT is now the only ACPI table that determines whether the AML interpreter is in 32-bit or 64-bit mode. Not really a functional change, but the hooks for per-table 32/64 switching have been removed from the code. A clarification to the ACPI specification is forthcoming in ACPI 3.0B. Fixed a possible leak of an Owner ID in the error path of tbinstal.c acpi_tb_init_table_descriptor() and migrated all table OwnerID deletion to a single place in acpi_tb_uninstall_table() to correct possible leaks when using the acpi_tb_delete_tables_by_type() interface (with assistance from Lance Ortiz.) Fixed a problem with Serialized control methods where the semaphore associated with the method could be over-signaled after multiple method invocations. Fixed two issues with the locking of the internal namespace data structure. Both the Unload() operator and acpi_unload_table() interface now lock the namespace during the namespace deletion associated with the table unload (with assistance from Linn Crosetto.) Fixed problem reports (Valery Podrezov) integrated: - Eliminate unnecessary memory allocation for CreateXxxxField http://bugzilla.kernel.org/show_bug.cgi?id=5426 Fixed problem reports (Fiodor Suietov) integrated: - Incomplete cleanup branches in AcpiTbGetTableRsdt (BZ 369) - On Address Space handler deletion, needless deactivation call (BZ 374) - AcpiRemoveAddressSpaceHandler: validate Device handle parameter (BZ 375) - Possible memory leak, Notify sub-objects of Processor, Power, ThermalZone (BZ 376) - AcpiRemoveAddressSpaceHandler: validate Handler parameter (BZ 378) - Minimum Length of RSDT should be validated (BZ 379) - AcpiRemoveNotifyHandler: return AE_NOT_EXIST if Processor Obj has no Handler (BZ (380) - AcpiUnloadTable: return AE_NOT_EXIST if no table of specified type loaded (BZ 381) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-07-08 00:44:38 +00:00
exit:
if (ACPI_FAILURE(status))
ACPI_EXCEPTION((AE_INFO, status, "Removing notify handler"));
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_remove_notify_handler)
/*******************************************************************************
*
* FUNCTION: acpi_install_gpe_handler
*
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 02:49:35 +00:00
* PARAMETERS: gpe_device - Namespace node for the GPE (NULL for FADT
* defined GPEs)
* gpe_number - The GPE number within the GPE block
* Type - Whether this GPE should be treated as an
* edge- or level-triggered interrupt.
* Address - Address of the handler
* Context - Value passed to the handler on each GPE
*
* RETURN: Status
*
* DESCRIPTION: Install a handler for a General Purpose Event.
*
******************************************************************************/
acpi_status
acpi_install_gpe_handler(acpi_handle gpe_device,
u32 gpe_number,
u32 type, acpi_gpe_handler address, void *context)
{
struct acpi_gpe_event_info *gpe_event_info;
struct acpi_gpe_handler_info *handler;
acpi_status status;
[ACPI] ACPICA 20060127 Implemented support in the Resource Manager to allow unresolved namestring references within resource package objects for the _PRT method. This support is in addition to the previously implemented unresolved reference support within the AML parser. If the interpreter slack mode is enabled (true on Linux unless acpi=strict), these unresolved references will be passed through to the caller as a NULL package entry. http://bugzilla.kernel.org/show_bug.cgi?id=5741 Implemented and deployed new macros and functions for error and warning messages across the subsystem. These macros are simpler and generate less code than their predecessors. The new macros ACPI_ERROR, ACPI_EXCEPTION, ACPI_WARNING, and ACPI_INFO replace the ACPI_REPORT_* macros. Implemented the acpi_cpu_flags type to simplify host OS integration of the Acquire/Release Lock OSL interfaces. Suggested by Steven Rostedt and Andrew Morton. Fixed a problem where Alias ASL operators are sometimes not correctly resolved. causing AE_AML_INTERNAL http://bugzilla.kernel.org/show_bug.cgi?id=5189 http://bugzilla.kernel.org/show_bug.cgi?id=5674 Fixed several problems with the implementation of the ConcatenateResTemplate ASL operator. As per the ACPI specification, zero length buffers are now treated as a single EndTag. One-length buffers always cause a fatal exception. Non-zero length buffers that do not end with a full 2-byte EndTag cause a fatal exception. Fixed a possible structure overwrite in the AcpiGetObjectInfo external interface. (With assistance from Thomas Renninger) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-01-27 21:43:00 +00:00
acpi_cpu_flags flags;
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-21 21:15:00 +00:00
ACPI_FUNCTION_TRACE(acpi_install_gpe_handler);
/* Parameter validation */
if ((!address) || (type & ~ACPI_GPE_XRUPT_TYPE_MASK)) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
ACPI / ACPICA: Fix reference counting problems with GPE handlers If a handler is installed for a GPE associated with an AML method and such that it cannot wake up the system from sleep states, the GPE remains enabled after the handler has been installed, although it should be disabled in that case to avoid spurious execution of the handler. Fix this issue by making acpi_install_gpe_handler() disable GPEs that were previously associated with AML methods and cannot wake up the system from sleep states. Analogously, make acpi_remove_gpe_handler() enable the GPEs that are associated with AML methods after their handlers have been removed and cannot wake up the system from sleep states. In addition to that, fix a code ordering issue in acpi_remove_gpe_handler() that renders the locking ineffective (ACPI_MTX_EVENTS is released temporarily in the middle of the routine to wait for the completion of events already in progress). For this purpose introduce acpi_raw_disable_gpe() and acpi_raw_enable_gpe() to be called with acpi_gbl_gpe_lock held and rework acpi_disable_gpe() and acpi_enable_gpe(), respectively, to use them. Also rework acpi_gpe_can_wake() to use acpi_raw_disable_gpe() instead of calling acpi_disable_gpe() after releasing the lock to avoid the possible theoretical race with acpi_install_gpe_handler(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: "Moore, Robert" <robert.moore@intel.com> Cc: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-03 21:55:14 +00:00
/* Allocate memory for the handler object */
handler = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_gpe_handler_info));
ACPI / ACPICA: Fix reference counting problems with GPE handlers If a handler is installed for a GPE associated with an AML method and such that it cannot wake up the system from sleep states, the GPE remains enabled after the handler has been installed, although it should be disabled in that case to avoid spurious execution of the handler. Fix this issue by making acpi_install_gpe_handler() disable GPEs that were previously associated with AML methods and cannot wake up the system from sleep states. Analogously, make acpi_remove_gpe_handler() enable the GPEs that are associated with AML methods after their handlers have been removed and cannot wake up the system from sleep states. In addition to that, fix a code ordering issue in acpi_remove_gpe_handler() that renders the locking ineffective (ACPI_MTX_EVENTS is released temporarily in the middle of the routine to wait for the completion of events already in progress). For this purpose introduce acpi_raw_disable_gpe() and acpi_raw_enable_gpe() to be called with acpi_gbl_gpe_lock held and rework acpi_disable_gpe() and acpi_enable_gpe(), respectively, to use them. Also rework acpi_gpe_can_wake() to use acpi_raw_disable_gpe() instead of calling acpi_disable_gpe() after releasing the lock to avoid the possible theoretical race with acpi_install_gpe_handler(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: "Moore, Robert" <robert.moore@intel.com> Cc: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-03 21:55:14 +00:00
if (!handler) {
status = AE_NO_MEMORY;
goto unlock_and_exit;
}
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
if (!gpe_event_info) {
status = AE_BAD_PARAMETER;
ACPI / ACPICA: Fix reference counting problems with GPE handlers If a handler is installed for a GPE associated with an AML method and such that it cannot wake up the system from sleep states, the GPE remains enabled after the handler has been installed, although it should be disabled in that case to avoid spurious execution of the handler. Fix this issue by making acpi_install_gpe_handler() disable GPEs that were previously associated with AML methods and cannot wake up the system from sleep states. Analogously, make acpi_remove_gpe_handler() enable the GPEs that are associated with AML methods after their handlers have been removed and cannot wake up the system from sleep states. In addition to that, fix a code ordering issue in acpi_remove_gpe_handler() that renders the locking ineffective (ACPI_MTX_EVENTS is released temporarily in the middle of the routine to wait for the completion of events already in progress). For this purpose introduce acpi_raw_disable_gpe() and acpi_raw_enable_gpe() to be called with acpi_gbl_gpe_lock held and rework acpi_disable_gpe() and acpi_enable_gpe(), respectively, to use them. Also rework acpi_gpe_can_wake() to use acpi_raw_disable_gpe() instead of calling acpi_disable_gpe() after releasing the lock to avoid the possible theoretical race with acpi_install_gpe_handler(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: "Moore, Robert" <robert.moore@intel.com> Cc: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-03 21:55:14 +00:00
goto free_and_exit;
}
/* Make sure that there isn't a handler there already */
if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
ACPI_GPE_DISPATCH_HANDLER) {
status = AE_ALREADY_EXISTS;
ACPI / ACPICA: Fix reference counting problems with GPE handlers If a handler is installed for a GPE associated with an AML method and such that it cannot wake up the system from sleep states, the GPE remains enabled after the handler has been installed, although it should be disabled in that case to avoid spurious execution of the handler. Fix this issue by making acpi_install_gpe_handler() disable GPEs that were previously associated with AML methods and cannot wake up the system from sleep states. Analogously, make acpi_remove_gpe_handler() enable the GPEs that are associated with AML methods after their handlers have been removed and cannot wake up the system from sleep states. In addition to that, fix a code ordering issue in acpi_remove_gpe_handler() that renders the locking ineffective (ACPI_MTX_EVENTS is released temporarily in the middle of the routine to wait for the completion of events already in progress). For this purpose introduce acpi_raw_disable_gpe() and acpi_raw_enable_gpe() to be called with acpi_gbl_gpe_lock held and rework acpi_disable_gpe() and acpi_enable_gpe(), respectively, to use them. Also rework acpi_gpe_can_wake() to use acpi_raw_disable_gpe() instead of calling acpi_disable_gpe() after releasing the lock to avoid the possible theoretical race with acpi_install_gpe_handler(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: "Moore, Robert" <robert.moore@intel.com> Cc: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-03 21:55:14 +00:00
goto free_and_exit;
}
/* Allocate and init handler object */
handler->address = address;
handler->context = context;
handler->method_node = gpe_event_info->dispatch.method_node;
handler->original_flags = gpe_event_info->flags &
ACPI / ACPICA: Fix reference counting problems with GPE handlers If a handler is installed for a GPE associated with an AML method and such that it cannot wake up the system from sleep states, the GPE remains enabled after the handler has been installed, although it should be disabled in that case to avoid spurious execution of the handler. Fix this issue by making acpi_install_gpe_handler() disable GPEs that were previously associated with AML methods and cannot wake up the system from sleep states. Analogously, make acpi_remove_gpe_handler() enable the GPEs that are associated with AML methods after their handlers have been removed and cannot wake up the system from sleep states. In addition to that, fix a code ordering issue in acpi_remove_gpe_handler() that renders the locking ineffective (ACPI_MTX_EVENTS is released temporarily in the middle of the routine to wait for the completion of events already in progress). For this purpose introduce acpi_raw_disable_gpe() and acpi_raw_enable_gpe() to be called with acpi_gbl_gpe_lock held and rework acpi_disable_gpe() and acpi_enable_gpe(), respectively, to use them. Also rework acpi_gpe_can_wake() to use acpi_raw_disable_gpe() instead of calling acpi_disable_gpe() after releasing the lock to avoid the possible theoretical race with acpi_install_gpe_handler(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: "Moore, Robert" <robert.moore@intel.com> Cc: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-03 21:55:14 +00:00
(ACPI_GPE_XRUPT_TYPE_MASK | ACPI_GPE_DISPATCH_MASK);
/*
* If the GPE is associated with a method, it might have been enabled
* automatically during initialization, in which case it has to be
* disabled now to avoid spurious execution of the handler.
ACPI / ACPICA: Fix reference counting problems with GPE handlers If a handler is installed for a GPE associated with an AML method and such that it cannot wake up the system from sleep states, the GPE remains enabled after the handler has been installed, although it should be disabled in that case to avoid spurious execution of the handler. Fix this issue by making acpi_install_gpe_handler() disable GPEs that were previously associated with AML methods and cannot wake up the system from sleep states. Analogously, make acpi_remove_gpe_handler() enable the GPEs that are associated with AML methods after their handlers have been removed and cannot wake up the system from sleep states. In addition to that, fix a code ordering issue in acpi_remove_gpe_handler() that renders the locking ineffective (ACPI_MTX_EVENTS is released temporarily in the middle of the routine to wait for the completion of events already in progress). For this purpose introduce acpi_raw_disable_gpe() and acpi_raw_enable_gpe() to be called with acpi_gbl_gpe_lock held and rework acpi_disable_gpe() and acpi_enable_gpe(), respectively, to use them. Also rework acpi_gpe_can_wake() to use acpi_raw_disable_gpe() instead of calling acpi_disable_gpe() after releasing the lock to avoid the possible theoretical race with acpi_install_gpe_handler(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: "Moore, Robert" <robert.moore@intel.com> Cc: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-03 21:55:14 +00:00
*/
if ((handler->original_flags & ACPI_GPE_DISPATCH_METHOD)
&& gpe_event_info->runtime_count) {
handler->originally_enabled = 1;
(void)acpi_ev_remove_gpe_reference(gpe_event_info);
}
/* Install the handler */
gpe_event_info->dispatch.handler = handler;
/* Setup up dispatch flags to indicate handler (vs. method) */
gpe_event_info->flags &=
~(ACPI_GPE_XRUPT_TYPE_MASK | ACPI_GPE_DISPATCH_MASK);
gpe_event_info->flags |= (u8) (type | ACPI_GPE_DISPATCH_HANDLER);
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
unlock_and_exit:
(void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
return_ACPI_STATUS(status);
ACPI / ACPICA: Fix reference counting problems with GPE handlers If a handler is installed for a GPE associated with an AML method and such that it cannot wake up the system from sleep states, the GPE remains enabled after the handler has been installed, although it should be disabled in that case to avoid spurious execution of the handler. Fix this issue by making acpi_install_gpe_handler() disable GPEs that were previously associated with AML methods and cannot wake up the system from sleep states. Analogously, make acpi_remove_gpe_handler() enable the GPEs that are associated with AML methods after their handlers have been removed and cannot wake up the system from sleep states. In addition to that, fix a code ordering issue in acpi_remove_gpe_handler() that renders the locking ineffective (ACPI_MTX_EVENTS is released temporarily in the middle of the routine to wait for the completion of events already in progress). For this purpose introduce acpi_raw_disable_gpe() and acpi_raw_enable_gpe() to be called with acpi_gbl_gpe_lock held and rework acpi_disable_gpe() and acpi_enable_gpe(), respectively, to use them. Also rework acpi_gpe_can_wake() to use acpi_raw_disable_gpe() instead of calling acpi_disable_gpe() after releasing the lock to avoid the possible theoretical race with acpi_install_gpe_handler(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: "Moore, Robert" <robert.moore@intel.com> Cc: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-03 21:55:14 +00:00
free_and_exit:
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
ACPI_FREE(handler);
goto unlock_and_exit;
}
ACPI_EXPORT_SYMBOL(acpi_install_gpe_handler)
/*******************************************************************************
*
* FUNCTION: acpi_remove_gpe_handler
*
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 02:49:35 +00:00
* PARAMETERS: gpe_device - Namespace node for the GPE (NULL for FADT
* defined GPEs)
* gpe_number - The event to remove a handler
* Address - Address of the handler
*
* RETURN: Status
*
* DESCRIPTION: Remove a handler for a General Purpose acpi_event.
*
******************************************************************************/
acpi_status
acpi_remove_gpe_handler(acpi_handle gpe_device,
u32 gpe_number, acpi_gpe_handler address)
{
struct acpi_gpe_event_info *gpe_event_info;
struct acpi_gpe_handler_info *handler;
acpi_status status;
[ACPI] ACPICA 20060127 Implemented support in the Resource Manager to allow unresolved namestring references within resource package objects for the _PRT method. This support is in addition to the previously implemented unresolved reference support within the AML parser. If the interpreter slack mode is enabled (true on Linux unless acpi=strict), these unresolved references will be passed through to the caller as a NULL package entry. http://bugzilla.kernel.org/show_bug.cgi?id=5741 Implemented and deployed new macros and functions for error and warning messages across the subsystem. These macros are simpler and generate less code than their predecessors. The new macros ACPI_ERROR, ACPI_EXCEPTION, ACPI_WARNING, and ACPI_INFO replace the ACPI_REPORT_* macros. Implemented the acpi_cpu_flags type to simplify host OS integration of the Acquire/Release Lock OSL interfaces. Suggested by Steven Rostedt and Andrew Morton. Fixed a problem where Alias ASL operators are sometimes not correctly resolved. causing AE_AML_INTERNAL http://bugzilla.kernel.org/show_bug.cgi?id=5189 http://bugzilla.kernel.org/show_bug.cgi?id=5674 Fixed several problems with the implementation of the ConcatenateResTemplate ASL operator. As per the ACPI specification, zero length buffers are now treated as a single EndTag. One-length buffers always cause a fatal exception. Non-zero length buffers that do not end with a full 2-byte EndTag cause a fatal exception. Fixed a possible structure overwrite in the AcpiGetObjectInfo external interface. (With assistance from Thomas Renninger) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-01-27 21:43:00 +00:00
acpi_cpu_flags flags;
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-21 21:15:00 +00:00
ACPI_FUNCTION_TRACE(acpi_remove_gpe_handler);
/* Parameter validation */
if (!address) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
ACPI / ACPICA: Fix reference counting problems with GPE handlers If a handler is installed for a GPE associated with an AML method and such that it cannot wake up the system from sleep states, the GPE remains enabled after the handler has been installed, although it should be disabled in that case to avoid spurious execution of the handler. Fix this issue by making acpi_install_gpe_handler() disable GPEs that were previously associated with AML methods and cannot wake up the system from sleep states. Analogously, make acpi_remove_gpe_handler() enable the GPEs that are associated with AML methods after their handlers have been removed and cannot wake up the system from sleep states. In addition to that, fix a code ordering issue in acpi_remove_gpe_handler() that renders the locking ineffective (ACPI_MTX_EVENTS is released temporarily in the middle of the routine to wait for the completion of events already in progress). For this purpose introduce acpi_raw_disable_gpe() and acpi_raw_enable_gpe() to be called with acpi_gbl_gpe_lock held and rework acpi_disable_gpe() and acpi_enable_gpe(), respectively, to use them. Also rework acpi_gpe_can_wake() to use acpi_raw_disable_gpe() instead of calling acpi_disable_gpe() after releasing the lock to avoid the possible theoretical race with acpi_install_gpe_handler(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: "Moore, Robert" <robert.moore@intel.com> Cc: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-03 21:55:14 +00:00
/* Make sure all deferred tasks are completed */
acpi_os_wait_events_complete(NULL);
status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
ACPI / ACPICA: Fix reference counting problems with GPE handlers If a handler is installed for a GPE associated with an AML method and such that it cannot wake up the system from sleep states, the GPE remains enabled after the handler has been installed, although it should be disabled in that case to avoid spurious execution of the handler. Fix this issue by making acpi_install_gpe_handler() disable GPEs that were previously associated with AML methods and cannot wake up the system from sleep states. Analogously, make acpi_remove_gpe_handler() enable the GPEs that are associated with AML methods after their handlers have been removed and cannot wake up the system from sleep states. In addition to that, fix a code ordering issue in acpi_remove_gpe_handler() that renders the locking ineffective (ACPI_MTX_EVENTS is released temporarily in the middle of the routine to wait for the completion of events already in progress). For this purpose introduce acpi_raw_disable_gpe() and acpi_raw_enable_gpe() to be called with acpi_gbl_gpe_lock held and rework acpi_disable_gpe() and acpi_enable_gpe(), respectively, to use them. Also rework acpi_gpe_can_wake() to use acpi_raw_disable_gpe() instead of calling acpi_disable_gpe() after releasing the lock to avoid the possible theoretical race with acpi_install_gpe_handler(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: "Moore, Robert" <robert.moore@intel.com> Cc: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-03 21:55:14 +00:00
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
if (!gpe_event_info) {
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
/* Make sure that a handler is indeed installed */
if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) !=
ACPI_GPE_DISPATCH_HANDLER) {
status = AE_NOT_EXIST;
goto unlock_and_exit;
}
/* Make sure that the installed handler is the same */
if (gpe_event_info->dispatch.handler->address != address) {
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
/* Remove the handler */
handler = gpe_event_info->dispatch.handler;
/* Restore Method node (if any), set dispatch flags */
gpe_event_info->dispatch.method_node = handler->method_node;
ACPI / ACPICA: Fix reference counting problems with GPE handlers If a handler is installed for a GPE associated with an AML method and such that it cannot wake up the system from sleep states, the GPE remains enabled after the handler has been installed, although it should be disabled in that case to avoid spurious execution of the handler. Fix this issue by making acpi_install_gpe_handler() disable GPEs that were previously associated with AML methods and cannot wake up the system from sleep states. Analogously, make acpi_remove_gpe_handler() enable the GPEs that are associated with AML methods after their handlers have been removed and cannot wake up the system from sleep states. In addition to that, fix a code ordering issue in acpi_remove_gpe_handler() that renders the locking ineffective (ACPI_MTX_EVENTS is released temporarily in the middle of the routine to wait for the completion of events already in progress). For this purpose introduce acpi_raw_disable_gpe() and acpi_raw_enable_gpe() to be called with acpi_gbl_gpe_lock held and rework acpi_disable_gpe() and acpi_enable_gpe(), respectively, to use them. Also rework acpi_gpe_can_wake() to use acpi_raw_disable_gpe() instead of calling acpi_disable_gpe() after releasing the lock to avoid the possible theoretical race with acpi_install_gpe_handler(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: "Moore, Robert" <robert.moore@intel.com> Cc: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-03 21:55:14 +00:00
gpe_event_info->flags &=
~(ACPI_GPE_XRUPT_TYPE_MASK | ACPI_GPE_DISPATCH_MASK);
gpe_event_info->flags |= handler->original_flags;
ACPI / ACPICA: Fix reference counting problems with GPE handlers If a handler is installed for a GPE associated with an AML method and such that it cannot wake up the system from sleep states, the GPE remains enabled after the handler has been installed, although it should be disabled in that case to avoid spurious execution of the handler. Fix this issue by making acpi_install_gpe_handler() disable GPEs that were previously associated with AML methods and cannot wake up the system from sleep states. Analogously, make acpi_remove_gpe_handler() enable the GPEs that are associated with AML methods after their handlers have been removed and cannot wake up the system from sleep states. In addition to that, fix a code ordering issue in acpi_remove_gpe_handler() that renders the locking ineffective (ACPI_MTX_EVENTS is released temporarily in the middle of the routine to wait for the completion of events already in progress). For this purpose introduce acpi_raw_disable_gpe() and acpi_raw_enable_gpe() to be called with acpi_gbl_gpe_lock held and rework acpi_disable_gpe() and acpi_enable_gpe(), respectively, to use them. Also rework acpi_gpe_can_wake() to use acpi_raw_disable_gpe() instead of calling acpi_disable_gpe() after releasing the lock to avoid the possible theoretical race with acpi_install_gpe_handler(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: "Moore, Robert" <robert.moore@intel.com> Cc: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-03 21:55:14 +00:00
/*
* If the GPE was previously associated with a method and it was
* enabled, it should be enabled at this point to restore the
* post-initialization configuration.
ACPI / ACPICA: Fix reference counting problems with GPE handlers If a handler is installed for a GPE associated with an AML method and such that it cannot wake up the system from sleep states, the GPE remains enabled after the handler has been installed, although it should be disabled in that case to avoid spurious execution of the handler. Fix this issue by making acpi_install_gpe_handler() disable GPEs that were previously associated with AML methods and cannot wake up the system from sleep states. Analogously, make acpi_remove_gpe_handler() enable the GPEs that are associated with AML methods after their handlers have been removed and cannot wake up the system from sleep states. In addition to that, fix a code ordering issue in acpi_remove_gpe_handler() that renders the locking ineffective (ACPI_MTX_EVENTS is released temporarily in the middle of the routine to wait for the completion of events already in progress). For this purpose introduce acpi_raw_disable_gpe() and acpi_raw_enable_gpe() to be called with acpi_gbl_gpe_lock held and rework acpi_disable_gpe() and acpi_enable_gpe(), respectively, to use them. Also rework acpi_gpe_can_wake() to use acpi_raw_disable_gpe() instead of calling acpi_disable_gpe() after releasing the lock to avoid the possible theoretical race with acpi_install_gpe_handler(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: "Moore, Robert" <robert.moore@intel.com> Cc: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-03 21:55:14 +00:00
*/
if ((handler->original_flags & ACPI_GPE_DISPATCH_METHOD)
&& handler->originally_enabled)
(void)acpi_ev_add_gpe_reference(gpe_event_info);
/* Now we can free the handler object */
ACPI_FREE(handler);
ACPI / ACPICA: Fix reference counting problems with GPE handlers If a handler is installed for a GPE associated with an AML method and such that it cannot wake up the system from sleep states, the GPE remains enabled after the handler has been installed, although it should be disabled in that case to avoid spurious execution of the handler. Fix this issue by making acpi_install_gpe_handler() disable GPEs that were previously associated with AML methods and cannot wake up the system from sleep states. Analogously, make acpi_remove_gpe_handler() enable the GPEs that are associated with AML methods after their handlers have been removed and cannot wake up the system from sleep states. In addition to that, fix a code ordering issue in acpi_remove_gpe_handler() that renders the locking ineffective (ACPI_MTX_EVENTS is released temporarily in the middle of the routine to wait for the completion of events already in progress). For this purpose introduce acpi_raw_disable_gpe() and acpi_raw_enable_gpe() to be called with acpi_gbl_gpe_lock held and rework acpi_disable_gpe() and acpi_enable_gpe(), respectively, to use them. Also rework acpi_gpe_can_wake() to use acpi_raw_disable_gpe() instead of calling acpi_disable_gpe() after releasing the lock to avoid the possible theoretical race with acpi_install_gpe_handler(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: "Moore, Robert" <robert.moore@intel.com> Cc: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-03 21:55:14 +00:00
unlock_and_exit:
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
(void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_remove_gpe_handler)
/*******************************************************************************
*
* FUNCTION: acpi_acquire_global_lock
*
* PARAMETERS: Timeout - How long the caller is willing to wait
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 02:49:35 +00:00
* Handle - Where the handle to the lock is returned
* (if acquired)
*
* RETURN: Status
*
* DESCRIPTION: Acquire the ACPI Global Lock
*
* Note: Allows callers with the same thread ID to acquire the global lock
* multiple times. In other words, externally, the behavior of the global lock
* is identical to an AML mutex. On the first acquire, a new handle is
* returned. On any subsequent calls to acquire by the same thread, the same
* handle is returned.
*
******************************************************************************/
acpi_status acpi_acquire_global_lock(u16 timeout, u32 * handle)
{
acpi_status status;
if (!handle) {
return (AE_BAD_PARAMETER);
}
/* Must lock interpreter to prevent race conditions */
acpi_ex_enter_interpreter();
status = acpi_ex_acquire_mutex_object(timeout,
acpi_gbl_global_lock_mutex,
acpi_os_get_thread_id());
if (ACPI_SUCCESS(status)) {
/* Return the global lock handle (updated in acpi_ev_acquire_global_lock) */
*handle = acpi_gbl_global_lock_handle;
}
acpi_ex_exit_interpreter();
return (status);
}
ACPI_EXPORT_SYMBOL(acpi_acquire_global_lock)
/*******************************************************************************
*
* FUNCTION: acpi_release_global_lock
*
* PARAMETERS: Handle - Returned from acpi_acquire_global_lock
*
* RETURN: Status
*
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 02:49:35 +00:00
* DESCRIPTION: Release the ACPI Global Lock. The handle must be valid.
*
******************************************************************************/
acpi_status acpi_release_global_lock(u32 handle)
{
acpi_status status;
if (!handle || (handle != acpi_gbl_global_lock_handle)) {
return (AE_NOT_ACQUIRED);
}
status = acpi_ex_release_mutex_object(acpi_gbl_global_lock_mutex);
return (status);
}
ACPI_EXPORT_SYMBOL(acpi_release_global_lock)