linux/arch/mips/mm/tlbex.c

1899 lines
48 KiB
C
Raw Normal View History

/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Synthesize TLB refill handlers at runtime.
*
* Copyright (C) 2004,2005,2006 by Thiemo Seufer
[MIPS] R4000/R4400 daddiu erratum workaround This complements the generic R4000/R4400 errata workaround code and adds bits for the daddiu problem. In most places it just modifies handwritten assembly code so that the assembler is allowed to use a temporary register as daddiu may now be treated as a macro that expands to a sequence of li and daddu. It is the AT register or, where AT is unavailable or used explicitly for another purpose, an explicitly-named register is selected, using the .set at=<reg> feature added recently to gas. This feature is only used if CONFIG_CPU_DADDI_WORKAROUNDS has been set, so if the workaround remains disabled, the required version of binutils stays unchanged. Similarly, daddiu instructions put in branch delay slots in noreorder fragments are now taken out of them and the assembler is allowed to reorder them itself as possible (which it does making the whole idea of scheduling them into delay slots manually questionable). Also in the very few places where such a simple conversion was not possible, a handcoded longer sequence is implemented. Other than that there are changes to code responsible for building the TLB fault and page clear/copy handlers to avoid daddiu as appropriate. These are only effective if the erratum is verified to be present at the run time. Finally there is a trivial update to __delay(), because it uses daddiu in a branch delay slot. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-23 11:43:25 +00:00
* Copyright (C) 2005, 2007 Maciej W. Rozycki
* Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org)
*
* ... and the days got worse and worse and now you see
* I've gone completly out of my mind.
*
* They're coming to take me a away haha
* they're coming to take me a away hoho hihi haha
* to the funny farm where code is beautiful all the time ...
*
* (Condolences to Napoleon XIV)
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/init.h>
[MIPS] R4000/R4400 daddiu erratum workaround This complements the generic R4000/R4400 errata workaround code and adds bits for the daddiu problem. In most places it just modifies handwritten assembly code so that the assembler is allowed to use a temporary register as daddiu may now be treated as a macro that expands to a sequence of li and daddu. It is the AT register or, where AT is unavailable or used explicitly for another purpose, an explicitly-named register is selected, using the .set at=<reg> feature added recently to gas. This feature is only used if CONFIG_CPU_DADDI_WORKAROUNDS has been set, so if the workaround remains disabled, the required version of binutils stays unchanged. Similarly, daddiu instructions put in branch delay slots in noreorder fragments are now taken out of them and the assembler is allowed to reorder them itself as possible (which it does making the whole idea of scheduling them into delay slots manually questionable). Also in the very few places where such a simple conversion was not possible, a handcoded longer sequence is implemented. Other than that there are changes to code responsible for building the TLB fault and page clear/copy handlers to avoid daddiu as appropriate. These are only effective if the erratum is verified to be present at the run time. Finally there is a trivial update to __delay(), because it uses daddiu in a branch delay slot. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-23 11:43:25 +00:00
#include <asm/bugs.h>
#include <asm/mmu_context.h>
#include <asm/inst.h>
#include <asm/elf.h>
#include <asm/war.h>
static inline int r45k_bvahwbug(void)
{
/* XXX: We should probe for the presence of this bug, but we don't. */
return 0;
}
static inline int r4k_250MHZhwbug(void)
{
/* XXX: We should probe for the presence of this bug, but we don't. */
return 0;
}
static inline int __maybe_unused bcm1250_m3_war(void)
{
return BCM1250_M3_WAR;
}
static inline int __maybe_unused r10000_llsc_war(void)
{
return R10000_LLSC_WAR;
}
/*
* Found by experiment: At least some revisions of the 4kc throw under
* some circumstances a machine check exception, triggered by invalid
* values in the index register. Delaying the tlbp instruction until
* after the next branch, plus adding an additional nop in front of
* tlbwi/tlbwr avoids the invalid index register values. Nobody knows
* why; it's not an issue caused by the core RTL.
*
*/
static int __init m4kc_tlbp_war(void)
{
return (current_cpu_data.processor_id & 0xffff00) ==
(PRID_COMP_MIPS | PRID_IMP_4KC);
}
/*
* A little micro-assembler, intended for TLB refill handler
* synthesizing. It is intentionally kept simple, does only support
* a subset of instructions, and does not try to hide pipeline effects
* like branch delay slots.
*/
enum fields
{
RS = 0x001,
RT = 0x002,
RD = 0x004,
RE = 0x008,
SIMM = 0x010,
UIMM = 0x020,
BIMM = 0x040,
JIMM = 0x080,
FUNC = 0x100,
SET = 0x200
};
#define OP_MASK 0x3f
#define OP_SH 26
#define RS_MASK 0x1f
#define RS_SH 21
#define RT_MASK 0x1f
#define RT_SH 16
#define RD_MASK 0x1f
#define RD_SH 11
#define RE_MASK 0x1f
#define RE_SH 6
#define IMM_MASK 0xffff
#define IMM_SH 0
#define JIMM_MASK 0x3ffffff
#define JIMM_SH 0
#define FUNC_MASK 0x3f
#define FUNC_SH 0
#define SET_MASK 0x7
#define SET_SH 0
enum opcode {
insn_invalid,
insn_addu, insn_addiu, insn_and, insn_andi, insn_beq,
insn_beql, insn_bgez, insn_bgezl, insn_bltz, insn_bltzl,
insn_bne, insn_daddu, insn_daddiu, insn_dmfc0, insn_dmtc0,
insn_dsll, insn_dsll32, insn_dsra, insn_dsrl, insn_dsrl32,
insn_dsubu, insn_eret, insn_j, insn_jal, insn_jr, insn_ld,
insn_ll, insn_lld, insn_lui, insn_lw, insn_mfc0, insn_mtc0,
insn_ori, insn_rfe, insn_sc, insn_scd, insn_sd, insn_sll,
insn_sra, insn_srl, insn_subu, insn_sw, insn_tlbp, insn_tlbwi,
insn_tlbwr, insn_xor, insn_xori
};
struct insn {
enum opcode opcode;
u32 match;
enum fields fields;
};
/* This macro sets the non-variable bits of an instruction. */
#define M(a, b, c, d, e, f) \
((a) << OP_SH \
| (b) << RS_SH \
| (c) << RT_SH \
| (d) << RD_SH \
| (e) << RE_SH \
| (f) << FUNC_SH)
static struct insn insn_table[] __initdata = {
{ insn_addiu, M(addiu_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
{ insn_addu, M(spec_op, 0, 0, 0, 0, addu_op), RS | RT | RD },
{ insn_and, M(spec_op, 0, 0, 0, 0, and_op), RS | RT | RD },
{ insn_andi, M(andi_op, 0, 0, 0, 0, 0), RS | RT | UIMM },
{ insn_beq, M(beq_op, 0, 0, 0, 0, 0), RS | RT | BIMM },
{ insn_beql, M(beql_op, 0, 0, 0, 0, 0), RS | RT | BIMM },
{ insn_bgez, M(bcond_op, 0, bgez_op, 0, 0, 0), RS | BIMM },
{ insn_bgezl, M(bcond_op, 0, bgezl_op, 0, 0, 0), RS | BIMM },
{ insn_bltz, M(bcond_op, 0, bltz_op, 0, 0, 0), RS | BIMM },
{ insn_bltzl, M(bcond_op, 0, bltzl_op, 0, 0, 0), RS | BIMM },
{ insn_bne, M(bne_op, 0, 0, 0, 0, 0), RS | RT | BIMM },
{ insn_daddiu, M(daddiu_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
{ insn_daddu, M(spec_op, 0, 0, 0, 0, daddu_op), RS | RT | RD },
{ insn_dmfc0, M(cop0_op, dmfc_op, 0, 0, 0, 0), RT | RD | SET},
{ insn_dmtc0, M(cop0_op, dmtc_op, 0, 0, 0, 0), RT | RD | SET},
{ insn_dsll, M(spec_op, 0, 0, 0, 0, dsll_op), RT | RD | RE },
{ insn_dsll32, M(spec_op, 0, 0, 0, 0, dsll32_op), RT | RD | RE },
{ insn_dsra, M(spec_op, 0, 0, 0, 0, dsra_op), RT | RD | RE },
{ insn_dsrl, M(spec_op, 0, 0, 0, 0, dsrl_op), RT | RD | RE },
{ insn_dsrl32, M(spec_op, 0, 0, 0, 0, dsrl32_op), RT | RD | RE },
{ insn_dsubu, M(spec_op, 0, 0, 0, 0, dsubu_op), RS | RT | RD },
{ insn_eret, M(cop0_op, cop_op, 0, 0, 0, eret_op), 0 },
{ insn_j, M(j_op, 0, 0, 0, 0, 0), JIMM },
{ insn_jal, M(jal_op, 0, 0, 0, 0, 0), JIMM },
{ insn_jr, M(spec_op, 0, 0, 0, 0, jr_op), RS },
{ insn_ld, M(ld_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
{ insn_ll, M(ll_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
{ insn_lld, M(lld_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
{ insn_lui, M(lui_op, 0, 0, 0, 0, 0), RT | SIMM },
{ insn_lw, M(lw_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
{ insn_mfc0, M(cop0_op, mfc_op, 0, 0, 0, 0), RT | RD | SET},
{ insn_mtc0, M(cop0_op, mtc_op, 0, 0, 0, 0), RT | RD | SET},
{ insn_ori, M(ori_op, 0, 0, 0, 0, 0), RS | RT | UIMM },
{ insn_rfe, M(cop0_op, cop_op, 0, 0, 0, rfe_op), 0 },
{ insn_sc, M(sc_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
{ insn_scd, M(scd_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
{ insn_sd, M(sd_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
{ insn_sll, M(spec_op, 0, 0, 0, 0, sll_op), RT | RD | RE },
{ insn_sra, M(spec_op, 0, 0, 0, 0, sra_op), RT | RD | RE },
{ insn_srl, M(spec_op, 0, 0, 0, 0, srl_op), RT | RD | RE },
{ insn_subu, M(spec_op, 0, 0, 0, 0, subu_op), RS | RT | RD },
{ insn_sw, M(sw_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
{ insn_tlbp, M(cop0_op, cop_op, 0, 0, 0, tlbp_op), 0 },
{ insn_tlbwi, M(cop0_op, cop_op, 0, 0, 0, tlbwi_op), 0 },
{ insn_tlbwr, M(cop0_op, cop_op, 0, 0, 0, tlbwr_op), 0 },
{ insn_xor, M(spec_op, 0, 0, 0, 0, xor_op), RS | RT | RD },
{ insn_xori, M(xori_op, 0, 0, 0, 0, 0), RS | RT | UIMM },
{ insn_invalid, 0, 0 }
};
#undef M
static u32 __init build_rs(u32 arg)
{
if (arg & ~RS_MASK)
printk(KERN_WARNING "TLB synthesizer field overflow\n");
return (arg & RS_MASK) << RS_SH;
}
static u32 __init build_rt(u32 arg)
{
if (arg & ~RT_MASK)
printk(KERN_WARNING "TLB synthesizer field overflow\n");
return (arg & RT_MASK) << RT_SH;
}
static u32 __init build_rd(u32 arg)
{
if (arg & ~RD_MASK)
printk(KERN_WARNING "TLB synthesizer field overflow\n");
return (arg & RD_MASK) << RD_SH;
}
static u32 __init build_re(u32 arg)
{
if (arg & ~RE_MASK)
printk(KERN_WARNING "TLB synthesizer field overflow\n");
return (arg & RE_MASK) << RE_SH;
}
static u32 __init build_simm(s32 arg)
{
if (arg > 0x7fff || arg < -0x8000)
printk(KERN_WARNING "TLB synthesizer field overflow\n");
return arg & 0xffff;
}
static u32 __init build_uimm(u32 arg)
{
if (arg & ~IMM_MASK)
printk(KERN_WARNING "TLB synthesizer field overflow\n");
return arg & IMM_MASK;
}
static u32 __init build_bimm(s32 arg)
{
if (arg > 0x1ffff || arg < -0x20000)
printk(KERN_WARNING "TLB synthesizer field overflow\n");
if (arg & 0x3)
printk(KERN_WARNING "Invalid TLB synthesizer branch target\n");
return ((arg < 0) ? (1 << 15) : 0) | ((arg >> 2) & 0x7fff);
}
static u32 __init build_jimm(u32 arg)
{
if (arg & ~((JIMM_MASK) << 2))
printk(KERN_WARNING "TLB synthesizer field overflow\n");
return (arg >> 2) & JIMM_MASK;
}
static u32 __init build_func(u32 arg)
{
if (arg & ~FUNC_MASK)
printk(KERN_WARNING "TLB synthesizer field overflow\n");
return arg & FUNC_MASK;
}
static u32 __init build_set(u32 arg)
{
if (arg & ~SET_MASK)
printk(KERN_WARNING "TLB synthesizer field overflow\n");
return arg & SET_MASK;
}
/*
* The order of opcode arguments is implicitly left to right,
* starting with RS and ending with FUNC or IMM.
*/
static void __init build_insn(u32 **buf, enum opcode opc, ...)
{
struct insn *ip = NULL;
unsigned int i;
va_list ap;
u32 op;
for (i = 0; insn_table[i].opcode != insn_invalid; i++)
if (insn_table[i].opcode == opc) {
ip = &insn_table[i];
break;
}
[MIPS] R4000/R4400 daddiu erratum workaround This complements the generic R4000/R4400 errata workaround code and adds bits for the daddiu problem. In most places it just modifies handwritten assembly code so that the assembler is allowed to use a temporary register as daddiu may now be treated as a macro that expands to a sequence of li and daddu. It is the AT register or, where AT is unavailable or used explicitly for another purpose, an explicitly-named register is selected, using the .set at=<reg> feature added recently to gas. This feature is only used if CONFIG_CPU_DADDI_WORKAROUNDS has been set, so if the workaround remains disabled, the required version of binutils stays unchanged. Similarly, daddiu instructions put in branch delay slots in noreorder fragments are now taken out of them and the assembler is allowed to reorder them itself as possible (which it does making the whole idea of scheduling them into delay slots manually questionable). Also in the very few places where such a simple conversion was not possible, a handcoded longer sequence is implemented. Other than that there are changes to code responsible for building the TLB fault and page clear/copy handlers to avoid daddiu as appropriate. These are only effective if the erratum is verified to be present at the run time. Finally there is a trivial update to __delay(), because it uses daddiu in a branch delay slot. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-23 11:43:25 +00:00
if (!ip || (opc == insn_daddiu && r4k_daddiu_bug()))
panic("Unsupported TLB synthesizer instruction %d", opc);
op = ip->match;
va_start(ap, opc);
if (ip->fields & RS) op |= build_rs(va_arg(ap, u32));
if (ip->fields & RT) op |= build_rt(va_arg(ap, u32));
if (ip->fields & RD) op |= build_rd(va_arg(ap, u32));
if (ip->fields & RE) op |= build_re(va_arg(ap, u32));
if (ip->fields & SIMM) op |= build_simm(va_arg(ap, s32));
if (ip->fields & UIMM) op |= build_uimm(va_arg(ap, u32));
if (ip->fields & BIMM) op |= build_bimm(va_arg(ap, s32));
if (ip->fields & JIMM) op |= build_jimm(va_arg(ap, u32));
if (ip->fields & FUNC) op |= build_func(va_arg(ap, u32));
if (ip->fields & SET) op |= build_set(va_arg(ap, u32));
va_end(ap);
**buf = op;
(*buf)++;
}
#define I_u1u2u3(op) \
static void __init __maybe_unused i##op(u32 **buf, unsigned int a, \
unsigned int b, unsigned int c) \
{ \
build_insn(buf, insn##op, a, b, c); \
}
#define I_u2u1u3(op) \
static void __init __maybe_unused i##op(u32 **buf, unsigned int a, \
unsigned int b, unsigned int c) \
{ \
build_insn(buf, insn##op, b, a, c); \
}
#define I_u3u1u2(op) \
static void __init __maybe_unused i##op(u32 **buf, unsigned int a, \
unsigned int b, unsigned int c) \
{ \
build_insn(buf, insn##op, b, c, a); \
}
#define I_u1u2s3(op) \
static void __init __maybe_unused i##op(u32 **buf, unsigned int a, \
unsigned int b, signed int c) \
{ \
build_insn(buf, insn##op, a, b, c); \
}
#define I_u2s3u1(op) \
static void __init __maybe_unused i##op(u32 **buf, unsigned int a, \
signed int b, unsigned int c) \
{ \
build_insn(buf, insn##op, c, a, b); \
}
#define I_u2u1s3(op) \
static void __init __maybe_unused i##op(u32 **buf, unsigned int a, \
unsigned int b, signed int c) \
{ \
build_insn(buf, insn##op, b, a, c); \
}
#define I_u1u2(op) \
static void __init __maybe_unused i##op(u32 **buf, unsigned int a, \
unsigned int b) \
{ \
build_insn(buf, insn##op, a, b); \
}
#define I_u1s2(op) \
static void __init __maybe_unused i##op(u32 **buf, unsigned int a, \
signed int b) \
{ \
build_insn(buf, insn##op, a, b); \
}
#define I_u1(op) \
static void __init __maybe_unused i##op(u32 **buf, unsigned int a) \
{ \
build_insn(buf, insn##op, a); \
}
#define I_0(op) \
static void __init __maybe_unused i##op(u32 **buf) \
{ \
build_insn(buf, insn##op); \
}
I_u2u1s3(_addiu);
I_u3u1u2(_addu);
I_u2u1u3(_andi);
I_u3u1u2(_and);
I_u1u2s3(_beq);
I_u1u2s3(_beql);
I_u1s2(_bgez);
I_u1s2(_bgezl);
I_u1s2(_bltz);
I_u1s2(_bltzl);
I_u1u2s3(_bne);
I_u1u2u3(_dmfc0);
I_u1u2u3(_dmtc0);
I_u2u1s3(_daddiu);
I_u3u1u2(_daddu);
I_u2u1u3(_dsll);
I_u2u1u3(_dsll32);
I_u2u1u3(_dsra);
I_u2u1u3(_dsrl);
I_u2u1u3(_dsrl32);
I_u3u1u2(_dsubu);
I_0(_eret);
I_u1(_j);
I_u1(_jal);
I_u1(_jr);
I_u2s3u1(_ld);
I_u2s3u1(_ll);
I_u2s3u1(_lld);
I_u1s2(_lui);
I_u2s3u1(_lw);
I_u1u2u3(_mfc0);
I_u1u2u3(_mtc0);
I_u2u1u3(_ori);
I_0(_rfe);
I_u2s3u1(_sc);
I_u2s3u1(_scd);
I_u2s3u1(_sd);
I_u2u1u3(_sll);
I_u2u1u3(_sra);
I_u2u1u3(_srl);
I_u3u1u2(_subu);
I_u2s3u1(_sw);
I_0(_tlbp);
I_0(_tlbwi);
I_0(_tlbwr);
I_u3u1u2(_xor)
I_u2u1u3(_xori);
/*
* handling labels
*/
enum label_id {
label_invalid,
label_second_part,
label_leave,
[MIPS] Load modules to CKSEG0 if CONFIG_BUILD_ELF64=n This is a patch to load 64-bit modules to CKSEG0 so that can be compiled with -msym32 option. This makes each module ~10% smaller. * introduce MODULE_START and MODULE_END * custom module_alloc() * PGD for modules * change XTLB refill handler synthesizer * enable -msym32 for modules again (revert ca78b1a5c6a6e70e052d3ea253828e49b5d07c8a) New XTLB refill handler looks like this: 80000080 dmfc0 k0,C0_BADVADDR 80000084 bltz k0,800000e4 # goto l_module_alloc 80000088 lui k1,0x8046 # %high(pgd_current) 8000008c ld k1,24600(k1) # %low(pgd_current) 80000090 dsrl k0,k0,0x1b # l_vmalloc_done: 80000094 andi k0,k0,0x1ff8 80000098 daddu k1,k1,k0 8000009c dmfc0 k0,C0_BADVADDR 800000a0 ld k1,0(k1) 800000a4 dsrl k0,k0,0x12 800000a8 andi k0,k0,0xff8 800000ac daddu k1,k1,k0 800000b0 dmfc0 k0,C0_XCONTEXT 800000b4 ld k1,0(k1) 800000b8 andi k0,k0,0xff0 800000bc daddu k1,k1,k0 800000c0 ld k0,0(k1) 800000c4 ld k1,8(k1) 800000c8 dsrl k0,k0,0x6 800000cc mtc0 k0,C0_ENTRYLO0 800000d0 dsrl k1,k1,0x6 800000d4 mtc0 k1,C0_ENTRYL01 800000d8 nop 800000dc tlbwr 800000e0 eret 800000e4 dsll k1,k0,0x2 # l_module_alloc: 800000e8 bgez k1,80000008 # goto l_vmalloc 800000ec lui k1,0xc000 800000f0 dsubu k0,k0,k1 800000f4 lui k1,0x8046 # %high(module_pg_dir) 800000f8 beq zero,zero,80000000 800000fc nop 80000000 beq zero,zero,80000090 # goto l_vmalloc_done 80000004 daddiu k1,k1,0x4000 80000008 dsll32 k1,k1,0x0 # l_vmalloc: 8000000c dsubu k0,k0,k1 80000010 beq zero,zero,80000090 # goto l_vmalloc_done 80000014 lui k1,0x8046 # %high(swapper_pg_dir) Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-25 15:08:31 +00:00
#ifdef MODULE_START
label_module_alloc,
#endif
label_vmalloc,
label_vmalloc_done,
label_tlbw_hazard,
label_split,
label_nopage_tlbl,
label_nopage_tlbs,
label_nopage_tlbm,
label_smp_pgtable_change,
label_r3000_write_probe_fail,
};
struct label {
u32 *addr;
enum label_id lab;
};
static void __init build_label(struct label **lab, u32 *addr,
enum label_id l)
{
(*lab)->addr = addr;
(*lab)->lab = l;
(*lab)++;
}
#define L_LA(lb) \
static inline void __init l##lb(struct label **lab, u32 *addr) \
{ \
build_label(lab, addr, label##lb); \
}
L_LA(_second_part)
L_LA(_leave)
[MIPS] Load modules to CKSEG0 if CONFIG_BUILD_ELF64=n This is a patch to load 64-bit modules to CKSEG0 so that can be compiled with -msym32 option. This makes each module ~10% smaller. * introduce MODULE_START and MODULE_END * custom module_alloc() * PGD for modules * change XTLB refill handler synthesizer * enable -msym32 for modules again (revert ca78b1a5c6a6e70e052d3ea253828e49b5d07c8a) New XTLB refill handler looks like this: 80000080 dmfc0 k0,C0_BADVADDR 80000084 bltz k0,800000e4 # goto l_module_alloc 80000088 lui k1,0x8046 # %high(pgd_current) 8000008c ld k1,24600(k1) # %low(pgd_current) 80000090 dsrl k0,k0,0x1b # l_vmalloc_done: 80000094 andi k0,k0,0x1ff8 80000098 daddu k1,k1,k0 8000009c dmfc0 k0,C0_BADVADDR 800000a0 ld k1,0(k1) 800000a4 dsrl k0,k0,0x12 800000a8 andi k0,k0,0xff8 800000ac daddu k1,k1,k0 800000b0 dmfc0 k0,C0_XCONTEXT 800000b4 ld k1,0(k1) 800000b8 andi k0,k0,0xff0 800000bc daddu k1,k1,k0 800000c0 ld k0,0(k1) 800000c4 ld k1,8(k1) 800000c8 dsrl k0,k0,0x6 800000cc mtc0 k0,C0_ENTRYLO0 800000d0 dsrl k1,k1,0x6 800000d4 mtc0 k1,C0_ENTRYL01 800000d8 nop 800000dc tlbwr 800000e0 eret 800000e4 dsll k1,k0,0x2 # l_module_alloc: 800000e8 bgez k1,80000008 # goto l_vmalloc 800000ec lui k1,0xc000 800000f0 dsubu k0,k0,k1 800000f4 lui k1,0x8046 # %high(module_pg_dir) 800000f8 beq zero,zero,80000000 800000fc nop 80000000 beq zero,zero,80000090 # goto l_vmalloc_done 80000004 daddiu k1,k1,0x4000 80000008 dsll32 k1,k1,0x0 # l_vmalloc: 8000000c dsubu k0,k0,k1 80000010 beq zero,zero,80000090 # goto l_vmalloc_done 80000014 lui k1,0x8046 # %high(swapper_pg_dir) Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-25 15:08:31 +00:00
#ifdef MODULE_START
L_LA(_module_alloc)
#endif
L_LA(_vmalloc)
L_LA(_vmalloc_done)
L_LA(_tlbw_hazard)
L_LA(_split)
L_LA(_nopage_tlbl)
L_LA(_nopage_tlbs)
L_LA(_nopage_tlbm)
L_LA(_smp_pgtable_change)
L_LA(_r3000_write_probe_fail)
/* convenience macros for instructions */
#ifdef CONFIG_64BIT
# define i_LW(buf, rs, rt, off) i_ld(buf, rs, rt, off)
# define i_SW(buf, rs, rt, off) i_sd(buf, rs, rt, off)
# define i_SLL(buf, rs, rt, sh) i_dsll(buf, rs, rt, sh)
# define i_SRA(buf, rs, rt, sh) i_dsra(buf, rs, rt, sh)
# define i_SRL(buf, rs, rt, sh) i_dsrl(buf, rs, rt, sh)
# define i_MFC0(buf, rt, rd...) i_dmfc0(buf, rt, rd)
# define i_MTC0(buf, rt, rd...) i_dmtc0(buf, rt, rd)
# define i_ADDIU(buf, rs, rt, val) i_daddiu(buf, rs, rt, val)
# define i_ADDU(buf, rs, rt, rd) i_daddu(buf, rs, rt, rd)
# define i_SUBU(buf, rs, rt, rd) i_dsubu(buf, rs, rt, rd)
# define i_LL(buf, rs, rt, off) i_lld(buf, rs, rt, off)
# define i_SC(buf, rs, rt, off) i_scd(buf, rs, rt, off)
#else
# define i_LW(buf, rs, rt, off) i_lw(buf, rs, rt, off)
# define i_SW(buf, rs, rt, off) i_sw(buf, rs, rt, off)
# define i_SLL(buf, rs, rt, sh) i_sll(buf, rs, rt, sh)
# define i_SRA(buf, rs, rt, sh) i_sra(buf, rs, rt, sh)
# define i_SRL(buf, rs, rt, sh) i_srl(buf, rs, rt, sh)
# define i_MFC0(buf, rt, rd...) i_mfc0(buf, rt, rd)
# define i_MTC0(buf, rt, rd...) i_mtc0(buf, rt, rd)
# define i_ADDIU(buf, rs, rt, val) i_addiu(buf, rs, rt, val)
# define i_ADDU(buf, rs, rt, rd) i_addu(buf, rs, rt, rd)
# define i_SUBU(buf, rs, rt, rd) i_subu(buf, rs, rt, rd)
# define i_LL(buf, rs, rt, off) i_ll(buf, rs, rt, off)
# define i_SC(buf, rs, rt, off) i_sc(buf, rs, rt, off)
#endif
#define i_b(buf, off) i_beq(buf, 0, 0, off)
#define i_beqz(buf, rs, off) i_beq(buf, rs, 0, off)
#define i_beqzl(buf, rs, off) i_beql(buf, rs, 0, off)
#define i_bnez(buf, rs, off) i_bne(buf, rs, 0, off)
#define i_bnezl(buf, rs, off) i_bnel(buf, rs, 0, off)
#define i_move(buf, a, b) i_ADDU(buf, a, 0, b)
#define i_nop(buf) i_sll(buf, 0, 0, 0)
#define i_ssnop(buf) i_sll(buf, 0, 0, 1)
#define i_ehb(buf) i_sll(buf, 0, 0, 3)
static int __init __maybe_unused in_compat_space_p(long addr)
{
/* Is this address in 32bit compat space? */
[MIPS] R4000/R4400 daddiu erratum workaround This complements the generic R4000/R4400 errata workaround code and adds bits for the daddiu problem. In most places it just modifies handwritten assembly code so that the assembler is allowed to use a temporary register as daddiu may now be treated as a macro that expands to a sequence of li and daddu. It is the AT register or, where AT is unavailable or used explicitly for another purpose, an explicitly-named register is selected, using the .set at=<reg> feature added recently to gas. This feature is only used if CONFIG_CPU_DADDI_WORKAROUNDS has been set, so if the workaround remains disabled, the required version of binutils stays unchanged. Similarly, daddiu instructions put in branch delay slots in noreorder fragments are now taken out of them and the assembler is allowed to reorder them itself as possible (which it does making the whole idea of scheduling them into delay slots manually questionable). Also in the very few places where such a simple conversion was not possible, a handcoded longer sequence is implemented. Other than that there are changes to code responsible for building the TLB fault and page clear/copy handlers to avoid daddiu as appropriate. These are only effective if the erratum is verified to be present at the run time. Finally there is a trivial update to __delay(), because it uses daddiu in a branch delay slot. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-23 11:43:25 +00:00
#ifdef CONFIG_64BIT
return (((addr) & 0xffffffff00000000L) == 0xffffffff00000000L);
[MIPS] R4000/R4400 daddiu erratum workaround This complements the generic R4000/R4400 errata workaround code and adds bits for the daddiu problem. In most places it just modifies handwritten assembly code so that the assembler is allowed to use a temporary register as daddiu may now be treated as a macro that expands to a sequence of li and daddu. It is the AT register or, where AT is unavailable or used explicitly for another purpose, an explicitly-named register is selected, using the .set at=<reg> feature added recently to gas. This feature is only used if CONFIG_CPU_DADDI_WORKAROUNDS has been set, so if the workaround remains disabled, the required version of binutils stays unchanged. Similarly, daddiu instructions put in branch delay slots in noreorder fragments are now taken out of them and the assembler is allowed to reorder them itself as possible (which it does making the whole idea of scheduling them into delay slots manually questionable). Also in the very few places where such a simple conversion was not possible, a handcoded longer sequence is implemented. Other than that there are changes to code responsible for building the TLB fault and page clear/copy handlers to avoid daddiu as appropriate. These are only effective if the erratum is verified to be present at the run time. Finally there is a trivial update to __delay(), because it uses daddiu in a branch delay slot. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-23 11:43:25 +00:00
#else
return 1;
#endif
}
static int __init __maybe_unused rel_highest(long val)
{
[MIPS] R4000/R4400 daddiu erratum workaround This complements the generic R4000/R4400 errata workaround code and adds bits for the daddiu problem. In most places it just modifies handwritten assembly code so that the assembler is allowed to use a temporary register as daddiu may now be treated as a macro that expands to a sequence of li and daddu. It is the AT register or, where AT is unavailable or used explicitly for another purpose, an explicitly-named register is selected, using the .set at=<reg> feature added recently to gas. This feature is only used if CONFIG_CPU_DADDI_WORKAROUNDS has been set, so if the workaround remains disabled, the required version of binutils stays unchanged. Similarly, daddiu instructions put in branch delay slots in noreorder fragments are now taken out of them and the assembler is allowed to reorder them itself as possible (which it does making the whole idea of scheduling them into delay slots manually questionable). Also in the very few places where such a simple conversion was not possible, a handcoded longer sequence is implemented. Other than that there are changes to code responsible for building the TLB fault and page clear/copy handlers to avoid daddiu as appropriate. These are only effective if the erratum is verified to be present at the run time. Finally there is a trivial update to __delay(), because it uses daddiu in a branch delay slot. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-23 11:43:25 +00:00
#ifdef CONFIG_64BIT
return ((((val + 0x800080008000L) >> 48) & 0xffff) ^ 0x8000) - 0x8000;
[MIPS] R4000/R4400 daddiu erratum workaround This complements the generic R4000/R4400 errata workaround code and adds bits for the daddiu problem. In most places it just modifies handwritten assembly code so that the assembler is allowed to use a temporary register as daddiu may now be treated as a macro that expands to a sequence of li and daddu. It is the AT register or, where AT is unavailable or used explicitly for another purpose, an explicitly-named register is selected, using the .set at=<reg> feature added recently to gas. This feature is only used if CONFIG_CPU_DADDI_WORKAROUNDS has been set, so if the workaround remains disabled, the required version of binutils stays unchanged. Similarly, daddiu instructions put in branch delay slots in noreorder fragments are now taken out of them and the assembler is allowed to reorder them itself as possible (which it does making the whole idea of scheduling them into delay slots manually questionable). Also in the very few places where such a simple conversion was not possible, a handcoded longer sequence is implemented. Other than that there are changes to code responsible for building the TLB fault and page clear/copy handlers to avoid daddiu as appropriate. These are only effective if the erratum is verified to be present at the run time. Finally there is a trivial update to __delay(), because it uses daddiu in a branch delay slot. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-23 11:43:25 +00:00
#else
return 0;
#endif
}
static int __init __maybe_unused rel_higher(long val)
{
[MIPS] R4000/R4400 daddiu erratum workaround This complements the generic R4000/R4400 errata workaround code and adds bits for the daddiu problem. In most places it just modifies handwritten assembly code so that the assembler is allowed to use a temporary register as daddiu may now be treated as a macro that expands to a sequence of li and daddu. It is the AT register or, where AT is unavailable or used explicitly for another purpose, an explicitly-named register is selected, using the .set at=<reg> feature added recently to gas. This feature is only used if CONFIG_CPU_DADDI_WORKAROUNDS has been set, so if the workaround remains disabled, the required version of binutils stays unchanged. Similarly, daddiu instructions put in branch delay slots in noreorder fragments are now taken out of them and the assembler is allowed to reorder them itself as possible (which it does making the whole idea of scheduling them into delay slots manually questionable). Also in the very few places where such a simple conversion was not possible, a handcoded longer sequence is implemented. Other than that there are changes to code responsible for building the TLB fault and page clear/copy handlers to avoid daddiu as appropriate. These are only effective if the erratum is verified to be present at the run time. Finally there is a trivial update to __delay(), because it uses daddiu in a branch delay slot. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-23 11:43:25 +00:00
#ifdef CONFIG_64BIT
return ((((val + 0x80008000L) >> 32) & 0xffff) ^ 0x8000) - 0x8000;
[MIPS] R4000/R4400 daddiu erratum workaround This complements the generic R4000/R4400 errata workaround code and adds bits for the daddiu problem. In most places it just modifies handwritten assembly code so that the assembler is allowed to use a temporary register as daddiu may now be treated as a macro that expands to a sequence of li and daddu. It is the AT register or, where AT is unavailable or used explicitly for another purpose, an explicitly-named register is selected, using the .set at=<reg> feature added recently to gas. This feature is only used if CONFIG_CPU_DADDI_WORKAROUNDS has been set, so if the workaround remains disabled, the required version of binutils stays unchanged. Similarly, daddiu instructions put in branch delay slots in noreorder fragments are now taken out of them and the assembler is allowed to reorder them itself as possible (which it does making the whole idea of scheduling them into delay slots manually questionable). Also in the very few places where such a simple conversion was not possible, a handcoded longer sequence is implemented. Other than that there are changes to code responsible for building the TLB fault and page clear/copy handlers to avoid daddiu as appropriate. These are only effective if the erratum is verified to be present at the run time. Finally there is a trivial update to __delay(), because it uses daddiu in a branch delay slot. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-23 11:43:25 +00:00
#else
return 0;
#endif
[MIPS] R4000/R4400 daddiu erratum workaround This complements the generic R4000/R4400 errata workaround code and adds bits for the daddiu problem. In most places it just modifies handwritten assembly code so that the assembler is allowed to use a temporary register as daddiu may now be treated as a macro that expands to a sequence of li and daddu. It is the AT register or, where AT is unavailable or used explicitly for another purpose, an explicitly-named register is selected, using the .set at=<reg> feature added recently to gas. This feature is only used if CONFIG_CPU_DADDI_WORKAROUNDS has been set, so if the workaround remains disabled, the required version of binutils stays unchanged. Similarly, daddiu instructions put in branch delay slots in noreorder fragments are now taken out of them and the assembler is allowed to reorder them itself as possible (which it does making the whole idea of scheduling them into delay slots manually questionable). Also in the very few places where such a simple conversion was not possible, a handcoded longer sequence is implemented. Other than that there are changes to code responsible for building the TLB fault and page clear/copy handlers to avoid daddiu as appropriate. These are only effective if the erratum is verified to be present at the run time. Finally there is a trivial update to __delay(), because it uses daddiu in a branch delay slot. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-23 11:43:25 +00:00
}
static int __init rel_hi(long val)
{
return ((((val + 0x8000L) >> 16) & 0xffff) ^ 0x8000) - 0x8000;
}
static int __init rel_lo(long val)
{
return ((val & 0xffff) ^ 0x8000) - 0x8000;
}
static void __init i_LA_mostly(u32 **buf, unsigned int rs, long addr)
{
if (!in_compat_space_p(addr)) {
i_lui(buf, rs, rel_highest(addr));
if (rel_higher(addr))
i_daddiu(buf, rs, rs, rel_higher(addr));
if (rel_hi(addr)) {
i_dsll(buf, rs, rs, 16);
i_daddiu(buf, rs, rs, rel_hi(addr));
i_dsll(buf, rs, rs, 16);
} else
i_dsll32(buf, rs, rs, 0);
} else
i_lui(buf, rs, rel_hi(addr));
}
static void __init __maybe_unused i_LA(u32 **buf, unsigned int rs, long addr)
{
i_LA_mostly(buf, rs, addr);
[MIPS] R4000/R4400 daddiu erratum workaround This complements the generic R4000/R4400 errata workaround code and adds bits for the daddiu problem. In most places it just modifies handwritten assembly code so that the assembler is allowed to use a temporary register as daddiu may now be treated as a macro that expands to a sequence of li and daddu. It is the AT register or, where AT is unavailable or used explicitly for another purpose, an explicitly-named register is selected, using the .set at=<reg> feature added recently to gas. This feature is only used if CONFIG_CPU_DADDI_WORKAROUNDS has been set, so if the workaround remains disabled, the required version of binutils stays unchanged. Similarly, daddiu instructions put in branch delay slots in noreorder fragments are now taken out of them and the assembler is allowed to reorder them itself as possible (which it does making the whole idea of scheduling them into delay slots manually questionable). Also in the very few places where such a simple conversion was not possible, a handcoded longer sequence is implemented. Other than that there are changes to code responsible for building the TLB fault and page clear/copy handlers to avoid daddiu as appropriate. These are only effective if the erratum is verified to be present at the run time. Finally there is a trivial update to __delay(), because it uses daddiu in a branch delay slot. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-23 11:43:25 +00:00
if (rel_lo(addr)) {
if (!in_compat_space_p(addr))
i_daddiu(buf, rs, rs, rel_lo(addr));
else
i_addiu(buf, rs, rs, rel_lo(addr));
}
}
/*
* handle relocations
*/
struct reloc {
u32 *addr;
unsigned int type;
enum label_id lab;
};
static void __init r_mips_pc16(struct reloc **rel, u32 *addr,
enum label_id l)
{
(*rel)->addr = addr;
(*rel)->type = R_MIPS_PC16;
(*rel)->lab = l;
(*rel)++;
}
static inline void __resolve_relocs(struct reloc *rel, struct label *lab)
{
long laddr = (long)lab->addr;
long raddr = (long)rel->addr;
switch (rel->type) {
case R_MIPS_PC16:
*rel->addr |= build_bimm(laddr - (raddr + 4));
break;
default:
panic("Unsupported TLB synthesizer relocation %d",
rel->type);
}
}
static void __init resolve_relocs(struct reloc *rel, struct label *lab)
{
struct label *l;
for (; rel->lab != label_invalid; rel++)
for (l = lab; l->lab != label_invalid; l++)
if (rel->lab == l->lab)
__resolve_relocs(rel, l);
}
static void __init move_relocs(struct reloc *rel, u32 *first, u32 *end,
long off)
{
for (; rel->lab != label_invalid; rel++)
if (rel->addr >= first && rel->addr < end)
rel->addr += off;
}
static void __init move_labels(struct label *lab, u32 *first, u32 *end,
long off)
{
for (; lab->lab != label_invalid; lab++)
if (lab->addr >= first && lab->addr < end)
lab->addr += off;
}
static void __init copy_handler(struct reloc *rel, struct label *lab,
u32 *first, u32 *end, u32 *target)
{
long off = (long)(target - first);
memcpy(target, first, (end - first) * sizeof(u32));
move_relocs(rel, first, end, off);
move_labels(lab, first, end, off);
}
static int __init __maybe_unused insn_has_bdelay(struct reloc *rel,
u32 *addr)
{
for (; rel->lab != label_invalid; rel++) {
if (rel->addr == addr
&& (rel->type == R_MIPS_PC16
|| rel->type == R_MIPS_26))
return 1;
}
return 0;
}
/* convenience functions for labeled branches */
static void __init __maybe_unused
il_bltz(u32 **p, struct reloc **r, unsigned int reg, enum label_id l)
{
r_mips_pc16(r, *p, l);
i_bltz(p, reg, 0);
}
static void __init __maybe_unused il_b(u32 **p, struct reloc **r,
enum label_id l)
{
r_mips_pc16(r, *p, l);
i_b(p, 0);
}
static void __init il_beqz(u32 **p, struct reloc **r, unsigned int reg,
enum label_id l)
{
r_mips_pc16(r, *p, l);
i_beqz(p, reg, 0);
}
static void __init __maybe_unused
il_beqzl(u32 **p, struct reloc **r, unsigned int reg, enum label_id l)
{
r_mips_pc16(r, *p, l);
i_beqzl(p, reg, 0);
}
static void __init il_bnez(u32 **p, struct reloc **r, unsigned int reg,
enum label_id l)
{
r_mips_pc16(r, *p, l);
i_bnez(p, reg, 0);
}
static void __init il_bgezl(u32 **p, struct reloc **r, unsigned int reg,
enum label_id l)
{
r_mips_pc16(r, *p, l);
i_bgezl(p, reg, 0);
}
static void __init __maybe_unused
[MIPS] Load modules to CKSEG0 if CONFIG_BUILD_ELF64=n This is a patch to load 64-bit modules to CKSEG0 so that can be compiled with -msym32 option. This makes each module ~10% smaller. * introduce MODULE_START and MODULE_END * custom module_alloc() * PGD for modules * change XTLB refill handler synthesizer * enable -msym32 for modules again (revert ca78b1a5c6a6e70e052d3ea253828e49b5d07c8a) New XTLB refill handler looks like this: 80000080 dmfc0 k0,C0_BADVADDR 80000084 bltz k0,800000e4 # goto l_module_alloc 80000088 lui k1,0x8046 # %high(pgd_current) 8000008c ld k1,24600(k1) # %low(pgd_current) 80000090 dsrl k0,k0,0x1b # l_vmalloc_done: 80000094 andi k0,k0,0x1ff8 80000098 daddu k1,k1,k0 8000009c dmfc0 k0,C0_BADVADDR 800000a0 ld k1,0(k1) 800000a4 dsrl k0,k0,0x12 800000a8 andi k0,k0,0xff8 800000ac daddu k1,k1,k0 800000b0 dmfc0 k0,C0_XCONTEXT 800000b4 ld k1,0(k1) 800000b8 andi k0,k0,0xff0 800000bc daddu k1,k1,k0 800000c0 ld k0,0(k1) 800000c4 ld k1,8(k1) 800000c8 dsrl k0,k0,0x6 800000cc mtc0 k0,C0_ENTRYLO0 800000d0 dsrl k1,k1,0x6 800000d4 mtc0 k1,C0_ENTRYL01 800000d8 nop 800000dc tlbwr 800000e0 eret 800000e4 dsll k1,k0,0x2 # l_module_alloc: 800000e8 bgez k1,80000008 # goto l_vmalloc 800000ec lui k1,0xc000 800000f0 dsubu k0,k0,k1 800000f4 lui k1,0x8046 # %high(module_pg_dir) 800000f8 beq zero,zero,80000000 800000fc nop 80000000 beq zero,zero,80000090 # goto l_vmalloc_done 80000004 daddiu k1,k1,0x4000 80000008 dsll32 k1,k1,0x0 # l_vmalloc: 8000000c dsubu k0,k0,k1 80000010 beq zero,zero,80000090 # goto l_vmalloc_done 80000014 lui k1,0x8046 # %high(swapper_pg_dir) Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-25 15:08:31 +00:00
il_bgez(u32 **p, struct reloc **r, unsigned int reg, enum label_id l)
{
r_mips_pc16(r, *p, l);
i_bgez(p, reg, 0);
}
/*
* For debug purposes.
*/
static inline void dump_handler(const u32 *handler, int count)
{
int i;
pr_debug("\t.set push\n");
pr_debug("\t.set noreorder\n");
for (i = 0; i < count; i++)
pr_debug("\t%p\t.word 0x%08x\n", &handler[i], handler[i]);
pr_debug("\t.set pop\n");
}
/* The only general purpose registers allowed in TLB handlers. */
#define K0 26
#define K1 27
/* Some CP0 registers */
#define C0_INDEX 0, 0
#define C0_ENTRYLO0 2, 0
#define C0_TCBIND 2, 2
#define C0_ENTRYLO1 3, 0
#define C0_CONTEXT 4, 0
#define C0_BADVADDR 8, 0
#define C0_ENTRYHI 10, 0
#define C0_EPC 14, 0
#define C0_XCONTEXT 20, 0
#ifdef CONFIG_64BIT
# define GET_CONTEXT(buf, reg) i_MFC0(buf, reg, C0_XCONTEXT)
#else
# define GET_CONTEXT(buf, reg) i_MFC0(buf, reg, C0_CONTEXT)
#endif
/* The worst case length of the handler is around 18 instructions for
* R3000-style TLBs and up to 63 instructions for R4000-style TLBs.
* Maximum space available is 32 instructions for R3000 and 64
* instructions for R4000.
*
* We deliberately chose a buffer size of 128, so we won't scribble
* over anything important on overflow before we panic.
*/
static u32 tlb_handler[128] __initdata;
/* simply assume worst case size for labels and relocs */
static struct label labels[128] __initdata;
static struct reloc relocs[128] __initdata;
/*
* The R3000 TLB handler is simple.
*/
static void __init build_r3000_tlb_refill_handler(void)
{
long pgdc = (long)pgd_current;
u32 *p;
memset(tlb_handler, 0, sizeof(tlb_handler));
p = tlb_handler;
i_mfc0(&p, K0, C0_BADVADDR);
i_lui(&p, K1, rel_hi(pgdc)); /* cp0 delay */
i_lw(&p, K1, rel_lo(pgdc), K1);
i_srl(&p, K0, K0, 22); /* load delay */
i_sll(&p, K0, K0, 2);
i_addu(&p, K1, K1, K0);
i_mfc0(&p, K0, C0_CONTEXT);
i_lw(&p, K1, 0, K1); /* cp0 delay */
i_andi(&p, K0, K0, 0xffc); /* load delay */
i_addu(&p, K1, K1, K0);
i_lw(&p, K0, 0, K1);
i_nop(&p); /* load delay */
i_mtc0(&p, K0, C0_ENTRYLO0);
i_mfc0(&p, K1, C0_EPC); /* cp0 delay */
i_tlbwr(&p); /* cp0 delay */
i_jr(&p, K1);
i_rfe(&p); /* branch delay */
if (p > tlb_handler + 32)
panic("TLB refill handler space exceeded");
pr_info("Synthesized TLB refill handler (%u instructions).\n",
(unsigned int)(p - tlb_handler));
memcpy((void *)ebase, tlb_handler, 0x80);
dump_handler((u32 *)ebase, 32);
}
/*
* The R4000 TLB handler is much more complicated. We have two
* consecutive handler areas with 32 instructions space each.
* Since they aren't used at the same time, we can overflow in the
* other one.To keep things simple, we first assume linear space,
* then we relocate it to the final handler layout as needed.
*/
static u32 final_handler[64] __initdata;
/*
* Hazards
*
* From the IDT errata for the QED RM5230 (Nevada), processor revision 1.0:
* 2. A timing hazard exists for the TLBP instruction.
*
* stalling_instruction
* TLBP
*
* The JTLB is being read for the TLBP throughout the stall generated by the
* previous instruction. This is not really correct as the stalling instruction
* can modify the address used to access the JTLB. The failure symptom is that
* the TLBP instruction will use an address created for the stalling instruction
* and not the address held in C0_ENHI and thus report the wrong results.
*
* The software work-around is to not allow the instruction preceding the TLBP
* to stall - make it an NOP or some other instruction guaranteed not to stall.
*
* Errata 2 will not be fixed. This errata is also on the R5000.
*
* As if we MIPS hackers wouldn't know how to nop pipelines happy ...
*/
static void __init __maybe_unused build_tlb_probe_entry(u32 **p)
{
switch (current_cpu_type()) {
/* Found by experiment: R4600 v2.0 needs this, too. */
case CPU_R4600:
case CPU_R5000:
case CPU_R5000A:
case CPU_NEVADA:
i_nop(p);
i_tlbp(p);
break;
default:
i_tlbp(p);
break;
}
}
/*
* Write random or indexed TLB entry, and care about the hazards from
* the preceeding mtc0 and for the following eret.
*/
enum tlb_write_entry { tlb_random, tlb_indexed };
static void __init build_tlb_write_entry(u32 **p, struct label **l,
struct reloc **r,
enum tlb_write_entry wmode)
{
void(*tlbw)(u32 **) = NULL;
switch (wmode) {
case tlb_random: tlbw = i_tlbwr; break;
case tlb_indexed: tlbw = i_tlbwi; break;
}
if (cpu_has_mips_r2) {
i_ehb(p);
tlbw(p);
return;
}
switch (current_cpu_type()) {
case CPU_R4000PC:
case CPU_R4000SC:
case CPU_R4000MC:
case CPU_R4400PC:
case CPU_R4400SC:
case CPU_R4400MC:
/*
* This branch uses up a mtc0 hazard nop slot and saves
* two nops after the tlbw instruction.
*/
il_bgezl(p, r, 0, label_tlbw_hazard);
tlbw(p);
l_tlbw_hazard(l, *p);
i_nop(p);
break;
case CPU_R4600:
case CPU_R4700:
case CPU_R5000:
case CPU_R5000A:
i_nop(p);
tlbw(p);
i_nop(p);
break;
case CPU_R4300:
case CPU_5KC:
case CPU_TX49XX:
case CPU_AU1000:
case CPU_AU1100:
case CPU_AU1500:
case CPU_AU1550:
case CPU_AU1200:
case CPU_AU1210:
case CPU_AU1250:
case CPU_PR4450:
i_nop(p);
tlbw(p);
break;
case CPU_R10000:
case CPU_R12000:
case CPU_R14000:
case CPU_4KC:
case CPU_SB1:
case CPU_SB1A:
case CPU_4KSC:
case CPU_20KC:
case CPU_25KF:
case CPU_BCM3302:
case CPU_BCM4710:
case CPU_LOONGSON2:
if (m4kc_tlbp_war())
i_nop(p);
tlbw(p);
break;
case CPU_NEVADA:
i_nop(p); /* QED specifies 2 nops hazard */
/*
* This branch uses up a mtc0 hazard nop slot and saves
* a nop after the tlbw instruction.
*/
il_bgezl(p, r, 0, label_tlbw_hazard);
tlbw(p);
l_tlbw_hazard(l, *p);
break;
case CPU_RM7000:
i_nop(p);
i_nop(p);
i_nop(p);
i_nop(p);
tlbw(p);
break;
case CPU_RM9000:
/*
* When the JTLB is updated by tlbwi or tlbwr, a subsequent
* use of the JTLB for instructions should not occur for 4
* cpu cycles and use for data translations should not occur
* for 3 cpu cycles.
*/
i_ssnop(p);
i_ssnop(p);
i_ssnop(p);
i_ssnop(p);
tlbw(p);
i_ssnop(p);
i_ssnop(p);
i_ssnop(p);
i_ssnop(p);
break;
case CPU_VR4111:
case CPU_VR4121:
case CPU_VR4122:
case CPU_VR4181:
case CPU_VR4181A:
i_nop(p);
i_nop(p);
tlbw(p);
i_nop(p);
i_nop(p);
break;
case CPU_VR4131:
case CPU_VR4133:
case CPU_R5432:
i_nop(p);
i_nop(p);
tlbw(p);
break;
default:
panic("No TLB refill handler yet (CPU type: %d)",
current_cpu_data.cputype);
break;
}
}
#ifdef CONFIG_64BIT
/*
* TMP and PTR are scratch.
* TMP will be clobbered, PTR will hold the pmd entry.
*/
static void __init
build_get_pmde64(u32 **p, struct label **l, struct reloc **r,
unsigned int tmp, unsigned int ptr)
{
long pgdc = (long)pgd_current;
/*
* The vmalloc handling is not in the hotpath.
*/
i_dmfc0(p, tmp, C0_BADVADDR);
[MIPS] Load modules to CKSEG0 if CONFIG_BUILD_ELF64=n This is a patch to load 64-bit modules to CKSEG0 so that can be compiled with -msym32 option. This makes each module ~10% smaller. * introduce MODULE_START and MODULE_END * custom module_alloc() * PGD for modules * change XTLB refill handler synthesizer * enable -msym32 for modules again (revert ca78b1a5c6a6e70e052d3ea253828e49b5d07c8a) New XTLB refill handler looks like this: 80000080 dmfc0 k0,C0_BADVADDR 80000084 bltz k0,800000e4 # goto l_module_alloc 80000088 lui k1,0x8046 # %high(pgd_current) 8000008c ld k1,24600(k1) # %low(pgd_current) 80000090 dsrl k0,k0,0x1b # l_vmalloc_done: 80000094 andi k0,k0,0x1ff8 80000098 daddu k1,k1,k0 8000009c dmfc0 k0,C0_BADVADDR 800000a0 ld k1,0(k1) 800000a4 dsrl k0,k0,0x12 800000a8 andi k0,k0,0xff8 800000ac daddu k1,k1,k0 800000b0 dmfc0 k0,C0_XCONTEXT 800000b4 ld k1,0(k1) 800000b8 andi k0,k0,0xff0 800000bc daddu k1,k1,k0 800000c0 ld k0,0(k1) 800000c4 ld k1,8(k1) 800000c8 dsrl k0,k0,0x6 800000cc mtc0 k0,C0_ENTRYLO0 800000d0 dsrl k1,k1,0x6 800000d4 mtc0 k1,C0_ENTRYL01 800000d8 nop 800000dc tlbwr 800000e0 eret 800000e4 dsll k1,k0,0x2 # l_module_alloc: 800000e8 bgez k1,80000008 # goto l_vmalloc 800000ec lui k1,0xc000 800000f0 dsubu k0,k0,k1 800000f4 lui k1,0x8046 # %high(module_pg_dir) 800000f8 beq zero,zero,80000000 800000fc nop 80000000 beq zero,zero,80000090 # goto l_vmalloc_done 80000004 daddiu k1,k1,0x4000 80000008 dsll32 k1,k1,0x0 # l_vmalloc: 8000000c dsubu k0,k0,k1 80000010 beq zero,zero,80000090 # goto l_vmalloc_done 80000014 lui k1,0x8046 # %high(swapper_pg_dir) Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-25 15:08:31 +00:00
#ifdef MODULE_START
il_bltz(p, r, tmp, label_module_alloc);
#else
il_bltz(p, r, tmp, label_vmalloc);
[MIPS] Load modules to CKSEG0 if CONFIG_BUILD_ELF64=n This is a patch to load 64-bit modules to CKSEG0 so that can be compiled with -msym32 option. This makes each module ~10% smaller. * introduce MODULE_START and MODULE_END * custom module_alloc() * PGD for modules * change XTLB refill handler synthesizer * enable -msym32 for modules again (revert ca78b1a5c6a6e70e052d3ea253828e49b5d07c8a) New XTLB refill handler looks like this: 80000080 dmfc0 k0,C0_BADVADDR 80000084 bltz k0,800000e4 # goto l_module_alloc 80000088 lui k1,0x8046 # %high(pgd_current) 8000008c ld k1,24600(k1) # %low(pgd_current) 80000090 dsrl k0,k0,0x1b # l_vmalloc_done: 80000094 andi k0,k0,0x1ff8 80000098 daddu k1,k1,k0 8000009c dmfc0 k0,C0_BADVADDR 800000a0 ld k1,0(k1) 800000a4 dsrl k0,k0,0x12 800000a8 andi k0,k0,0xff8 800000ac daddu k1,k1,k0 800000b0 dmfc0 k0,C0_XCONTEXT 800000b4 ld k1,0(k1) 800000b8 andi k0,k0,0xff0 800000bc daddu k1,k1,k0 800000c0 ld k0,0(k1) 800000c4 ld k1,8(k1) 800000c8 dsrl k0,k0,0x6 800000cc mtc0 k0,C0_ENTRYLO0 800000d0 dsrl k1,k1,0x6 800000d4 mtc0 k1,C0_ENTRYL01 800000d8 nop 800000dc tlbwr 800000e0 eret 800000e4 dsll k1,k0,0x2 # l_module_alloc: 800000e8 bgez k1,80000008 # goto l_vmalloc 800000ec lui k1,0xc000 800000f0 dsubu k0,k0,k1 800000f4 lui k1,0x8046 # %high(module_pg_dir) 800000f8 beq zero,zero,80000000 800000fc nop 80000000 beq zero,zero,80000090 # goto l_vmalloc_done 80000004 daddiu k1,k1,0x4000 80000008 dsll32 k1,k1,0x0 # l_vmalloc: 8000000c dsubu k0,k0,k1 80000010 beq zero,zero,80000090 # goto l_vmalloc_done 80000014 lui k1,0x8046 # %high(swapper_pg_dir) Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-25 15:08:31 +00:00
#endif
/* No i_nop needed here, since the next insn doesn't touch TMP. */
#ifdef CONFIG_SMP
# ifdef CONFIG_MIPS_MT_SMTC
/*
* SMTC uses TCBind value as "CPU" index
*/
i_mfc0(p, ptr, C0_TCBIND);
i_dsrl(p, ptr, ptr, 19);
# else
/*
* 64 bit SMP running in XKPHYS has smp_processor_id() << 3
* stored in CONTEXT.
*/
i_dmfc0(p, ptr, C0_CONTEXT);
i_dsrl(p, ptr, ptr, 23);
#endif
i_LA_mostly(p, tmp, pgdc);
i_daddu(p, ptr, ptr, tmp);
i_dmfc0(p, tmp, C0_BADVADDR);
i_ld(p, ptr, rel_lo(pgdc), ptr);
#else
i_LA_mostly(p, ptr, pgdc);
i_ld(p, ptr, rel_lo(pgdc), ptr);
#endif
l_vmalloc_done(l, *p);
if (PGDIR_SHIFT - 3 < 32) /* get pgd offset in bytes */
i_dsrl(p, tmp, tmp, PGDIR_SHIFT-3);
else
i_dsrl32(p, tmp, tmp, PGDIR_SHIFT - 3 - 32);
i_andi(p, tmp, tmp, (PTRS_PER_PGD - 1)<<3);
i_daddu(p, ptr, ptr, tmp); /* add in pgd offset */
i_dmfc0(p, tmp, C0_BADVADDR); /* get faulting address */
i_ld(p, ptr, 0, ptr); /* get pmd pointer */
i_dsrl(p, tmp, tmp, PMD_SHIFT-3); /* get pmd offset in bytes */
i_andi(p, tmp, tmp, (PTRS_PER_PMD - 1)<<3);
i_daddu(p, ptr, ptr, tmp); /* add in pmd offset */
}
/*
* BVADDR is the faulting address, PTR is scratch.
* PTR will hold the pgd for vmalloc.
*/
static void __init
build_get_pgd_vmalloc64(u32 **p, struct label **l, struct reloc **r,
unsigned int bvaddr, unsigned int ptr)
{
long swpd = (long)swapper_pg_dir;
[MIPS] Load modules to CKSEG0 if CONFIG_BUILD_ELF64=n This is a patch to load 64-bit modules to CKSEG0 so that can be compiled with -msym32 option. This makes each module ~10% smaller. * introduce MODULE_START and MODULE_END * custom module_alloc() * PGD for modules * change XTLB refill handler synthesizer * enable -msym32 for modules again (revert ca78b1a5c6a6e70e052d3ea253828e49b5d07c8a) New XTLB refill handler looks like this: 80000080 dmfc0 k0,C0_BADVADDR 80000084 bltz k0,800000e4 # goto l_module_alloc 80000088 lui k1,0x8046 # %high(pgd_current) 8000008c ld k1,24600(k1) # %low(pgd_current) 80000090 dsrl k0,k0,0x1b # l_vmalloc_done: 80000094 andi k0,k0,0x1ff8 80000098 daddu k1,k1,k0 8000009c dmfc0 k0,C0_BADVADDR 800000a0 ld k1,0(k1) 800000a4 dsrl k0,k0,0x12 800000a8 andi k0,k0,0xff8 800000ac daddu k1,k1,k0 800000b0 dmfc0 k0,C0_XCONTEXT 800000b4 ld k1,0(k1) 800000b8 andi k0,k0,0xff0 800000bc daddu k1,k1,k0 800000c0 ld k0,0(k1) 800000c4 ld k1,8(k1) 800000c8 dsrl k0,k0,0x6 800000cc mtc0 k0,C0_ENTRYLO0 800000d0 dsrl k1,k1,0x6 800000d4 mtc0 k1,C0_ENTRYL01 800000d8 nop 800000dc tlbwr 800000e0 eret 800000e4 dsll k1,k0,0x2 # l_module_alloc: 800000e8 bgez k1,80000008 # goto l_vmalloc 800000ec lui k1,0xc000 800000f0 dsubu k0,k0,k1 800000f4 lui k1,0x8046 # %high(module_pg_dir) 800000f8 beq zero,zero,80000000 800000fc nop 80000000 beq zero,zero,80000090 # goto l_vmalloc_done 80000004 daddiu k1,k1,0x4000 80000008 dsll32 k1,k1,0x0 # l_vmalloc: 8000000c dsubu k0,k0,k1 80000010 beq zero,zero,80000090 # goto l_vmalloc_done 80000014 lui k1,0x8046 # %high(swapper_pg_dir) Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-25 15:08:31 +00:00
#ifdef MODULE_START
long modd = (long)module_pg_dir;
l_module_alloc(l, *p);
/*
* Assumption:
* VMALLOC_START >= 0xc000000000000000UL
* MODULE_START >= 0xe000000000000000UL
*/
i_SLL(p, ptr, bvaddr, 2);
il_bgez(p, r, ptr, label_vmalloc);
if (in_compat_space_p(MODULE_START) && !rel_lo(MODULE_START)) {
i_lui(p, ptr, rel_hi(MODULE_START)); /* delay slot */
} else {
/* unlikely configuration */
i_nop(p); /* delay slot */
i_LA(p, ptr, MODULE_START);
}
i_dsubu(p, bvaddr, bvaddr, ptr);
if (in_compat_space_p(modd) && !rel_lo(modd)) {
il_b(p, r, label_vmalloc_done);
i_lui(p, ptr, rel_hi(modd));
} else {
i_LA_mostly(p, ptr, modd);
il_b(p, r, label_vmalloc_done);
[MIPS] R4000/R4400 daddiu erratum workaround This complements the generic R4000/R4400 errata workaround code and adds bits for the daddiu problem. In most places it just modifies handwritten assembly code so that the assembler is allowed to use a temporary register as daddiu may now be treated as a macro that expands to a sequence of li and daddu. It is the AT register or, where AT is unavailable or used explicitly for another purpose, an explicitly-named register is selected, using the .set at=<reg> feature added recently to gas. This feature is only used if CONFIG_CPU_DADDI_WORKAROUNDS has been set, so if the workaround remains disabled, the required version of binutils stays unchanged. Similarly, daddiu instructions put in branch delay slots in noreorder fragments are now taken out of them and the assembler is allowed to reorder them itself as possible (which it does making the whole idea of scheduling them into delay slots manually questionable). Also in the very few places where such a simple conversion was not possible, a handcoded longer sequence is implemented. Other than that there are changes to code responsible for building the TLB fault and page clear/copy handlers to avoid daddiu as appropriate. These are only effective if the erratum is verified to be present at the run time. Finally there is a trivial update to __delay(), because it uses daddiu in a branch delay slot. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-23 11:43:25 +00:00
if (in_compat_space_p(modd))
i_addiu(p, ptr, ptr, rel_lo(modd));
else
i_daddiu(p, ptr, ptr, rel_lo(modd));
[MIPS] Load modules to CKSEG0 if CONFIG_BUILD_ELF64=n This is a patch to load 64-bit modules to CKSEG0 so that can be compiled with -msym32 option. This makes each module ~10% smaller. * introduce MODULE_START and MODULE_END * custom module_alloc() * PGD for modules * change XTLB refill handler synthesizer * enable -msym32 for modules again (revert ca78b1a5c6a6e70e052d3ea253828e49b5d07c8a) New XTLB refill handler looks like this: 80000080 dmfc0 k0,C0_BADVADDR 80000084 bltz k0,800000e4 # goto l_module_alloc 80000088 lui k1,0x8046 # %high(pgd_current) 8000008c ld k1,24600(k1) # %low(pgd_current) 80000090 dsrl k0,k0,0x1b # l_vmalloc_done: 80000094 andi k0,k0,0x1ff8 80000098 daddu k1,k1,k0 8000009c dmfc0 k0,C0_BADVADDR 800000a0 ld k1,0(k1) 800000a4 dsrl k0,k0,0x12 800000a8 andi k0,k0,0xff8 800000ac daddu k1,k1,k0 800000b0 dmfc0 k0,C0_XCONTEXT 800000b4 ld k1,0(k1) 800000b8 andi k0,k0,0xff0 800000bc daddu k1,k1,k0 800000c0 ld k0,0(k1) 800000c4 ld k1,8(k1) 800000c8 dsrl k0,k0,0x6 800000cc mtc0 k0,C0_ENTRYLO0 800000d0 dsrl k1,k1,0x6 800000d4 mtc0 k1,C0_ENTRYL01 800000d8 nop 800000dc tlbwr 800000e0 eret 800000e4 dsll k1,k0,0x2 # l_module_alloc: 800000e8 bgez k1,80000008 # goto l_vmalloc 800000ec lui k1,0xc000 800000f0 dsubu k0,k0,k1 800000f4 lui k1,0x8046 # %high(module_pg_dir) 800000f8 beq zero,zero,80000000 800000fc nop 80000000 beq zero,zero,80000090 # goto l_vmalloc_done 80000004 daddiu k1,k1,0x4000 80000008 dsll32 k1,k1,0x0 # l_vmalloc: 8000000c dsubu k0,k0,k1 80000010 beq zero,zero,80000090 # goto l_vmalloc_done 80000014 lui k1,0x8046 # %high(swapper_pg_dir) Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-25 15:08:31 +00:00
}
l_vmalloc(l, *p);
if (in_compat_space_p(MODULE_START) && !rel_lo(MODULE_START) &&
MODULE_START << 32 == VMALLOC_START)
i_dsll32(p, ptr, ptr, 0); /* typical case */
else
i_LA(p, ptr, VMALLOC_START);
#else
l_vmalloc(l, *p);
i_LA(p, ptr, VMALLOC_START);
[MIPS] Load modules to CKSEG0 if CONFIG_BUILD_ELF64=n This is a patch to load 64-bit modules to CKSEG0 so that can be compiled with -msym32 option. This makes each module ~10% smaller. * introduce MODULE_START and MODULE_END * custom module_alloc() * PGD for modules * change XTLB refill handler synthesizer * enable -msym32 for modules again (revert ca78b1a5c6a6e70e052d3ea253828e49b5d07c8a) New XTLB refill handler looks like this: 80000080 dmfc0 k0,C0_BADVADDR 80000084 bltz k0,800000e4 # goto l_module_alloc 80000088 lui k1,0x8046 # %high(pgd_current) 8000008c ld k1,24600(k1) # %low(pgd_current) 80000090 dsrl k0,k0,0x1b # l_vmalloc_done: 80000094 andi k0,k0,0x1ff8 80000098 daddu k1,k1,k0 8000009c dmfc0 k0,C0_BADVADDR 800000a0 ld k1,0(k1) 800000a4 dsrl k0,k0,0x12 800000a8 andi k0,k0,0xff8 800000ac daddu k1,k1,k0 800000b0 dmfc0 k0,C0_XCONTEXT 800000b4 ld k1,0(k1) 800000b8 andi k0,k0,0xff0 800000bc daddu k1,k1,k0 800000c0 ld k0,0(k1) 800000c4 ld k1,8(k1) 800000c8 dsrl k0,k0,0x6 800000cc mtc0 k0,C0_ENTRYLO0 800000d0 dsrl k1,k1,0x6 800000d4 mtc0 k1,C0_ENTRYL01 800000d8 nop 800000dc tlbwr 800000e0 eret 800000e4 dsll k1,k0,0x2 # l_module_alloc: 800000e8 bgez k1,80000008 # goto l_vmalloc 800000ec lui k1,0xc000 800000f0 dsubu k0,k0,k1 800000f4 lui k1,0x8046 # %high(module_pg_dir) 800000f8 beq zero,zero,80000000 800000fc nop 80000000 beq zero,zero,80000090 # goto l_vmalloc_done 80000004 daddiu k1,k1,0x4000 80000008 dsll32 k1,k1,0x0 # l_vmalloc: 8000000c dsubu k0,k0,k1 80000010 beq zero,zero,80000090 # goto l_vmalloc_done 80000014 lui k1,0x8046 # %high(swapper_pg_dir) Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-25 15:08:31 +00:00
#endif
i_dsubu(p, bvaddr, bvaddr, ptr);
if (in_compat_space_p(swpd) && !rel_lo(swpd)) {
il_b(p, r, label_vmalloc_done);
i_lui(p, ptr, rel_hi(swpd));
} else {
i_LA_mostly(p, ptr, swpd);
il_b(p, r, label_vmalloc_done);
[MIPS] R4000/R4400 daddiu erratum workaround This complements the generic R4000/R4400 errata workaround code and adds bits for the daddiu problem. In most places it just modifies handwritten assembly code so that the assembler is allowed to use a temporary register as daddiu may now be treated as a macro that expands to a sequence of li and daddu. It is the AT register or, where AT is unavailable or used explicitly for another purpose, an explicitly-named register is selected, using the .set at=<reg> feature added recently to gas. This feature is only used if CONFIG_CPU_DADDI_WORKAROUNDS has been set, so if the workaround remains disabled, the required version of binutils stays unchanged. Similarly, daddiu instructions put in branch delay slots in noreorder fragments are now taken out of them and the assembler is allowed to reorder them itself as possible (which it does making the whole idea of scheduling them into delay slots manually questionable). Also in the very few places where such a simple conversion was not possible, a handcoded longer sequence is implemented. Other than that there are changes to code responsible for building the TLB fault and page clear/copy handlers to avoid daddiu as appropriate. These are only effective if the erratum is verified to be present at the run time. Finally there is a trivial update to __delay(), because it uses daddiu in a branch delay slot. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-23 11:43:25 +00:00
if (in_compat_space_p(swpd))
i_addiu(p, ptr, ptr, rel_lo(swpd));
else
i_daddiu(p, ptr, ptr, rel_lo(swpd));
}
}
#else /* !CONFIG_64BIT */
/*
* TMP and PTR are scratch.
* TMP will be clobbered, PTR will hold the pgd entry.
*/
static void __init __maybe_unused
build_get_pgde32(u32 **p, unsigned int tmp, unsigned int ptr)
{
long pgdc = (long)pgd_current;
/* 32 bit SMP has smp_processor_id() stored in CONTEXT. */
#ifdef CONFIG_SMP
#ifdef CONFIG_MIPS_MT_SMTC
/*
* SMTC uses TCBind value as "CPU" index
*/
i_mfc0(p, ptr, C0_TCBIND);
i_LA_mostly(p, tmp, pgdc);
i_srl(p, ptr, ptr, 19);
#else
/*
* smp_processor_id() << 3 is stored in CONTEXT.
*/
i_mfc0(p, ptr, C0_CONTEXT);
i_LA_mostly(p, tmp, pgdc);
i_srl(p, ptr, ptr, 23);
#endif
i_addu(p, ptr, tmp, ptr);
#else
i_LA_mostly(p, ptr, pgdc);
#endif
i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
i_lw(p, ptr, rel_lo(pgdc), ptr);
i_srl(p, tmp, tmp, PGDIR_SHIFT); /* get pgd only bits */
i_sll(p, tmp, tmp, PGD_T_LOG2);
i_addu(p, ptr, ptr, tmp); /* add in pgd offset */
}
#endif /* !CONFIG_64BIT */
static void __init build_adjust_context(u32 **p, unsigned int ctx)
{
unsigned int shift = 4 - (PTE_T_LOG2 + 1) + PAGE_SHIFT - 12;
unsigned int mask = (PTRS_PER_PTE / 2 - 1) << (PTE_T_LOG2 + 1);
switch (current_cpu_type()) {
case CPU_VR41XX:
case CPU_VR4111:
case CPU_VR4121:
case CPU_VR4122:
case CPU_VR4131:
case CPU_VR4181:
case CPU_VR4181A:
case CPU_VR4133:
shift += 2;
break;
default:
break;
}
if (shift)
i_SRL(p, ctx, ctx, shift);
i_andi(p, ctx, ctx, mask);
}
static void __init build_get_ptep(u32 **p, unsigned int tmp, unsigned int ptr)
{
/*
* Bug workaround for the Nevada. It seems as if under certain
* circumstances the move from cp0_context might produce a
* bogus result when the mfc0 instruction and its consumer are
* in a different cacheline or a load instruction, probably any
* memory reference, is between them.
*/
switch (current_cpu_type()) {
case CPU_NEVADA:
i_LW(p, ptr, 0, ptr);
GET_CONTEXT(p, tmp); /* get context reg */
break;
default:
GET_CONTEXT(p, tmp); /* get context reg */
i_LW(p, ptr, 0, ptr);
break;
}
build_adjust_context(p, tmp);
i_ADDU(p, ptr, ptr, tmp); /* add in offset */
}
static void __init build_update_entries(u32 **p, unsigned int tmp,
unsigned int ptep)
{
/*
* 64bit address support (36bit on a 32bit CPU) in a 32bit
* Kernel is a special case. Only a few CPUs use it.
*/
#ifdef CONFIG_64BIT_PHYS_ADDR
if (cpu_has_64bits) {
i_ld(p, tmp, 0, ptep); /* get even pte */
i_ld(p, ptep, sizeof(pte_t), ptep); /* get odd pte */
i_dsrl(p, tmp, tmp, 6); /* convert to entrylo0 */
i_mtc0(p, tmp, C0_ENTRYLO0); /* load it */
i_dsrl(p, ptep, ptep, 6); /* convert to entrylo1 */
i_mtc0(p, ptep, C0_ENTRYLO1); /* load it */
} else {
int pte_off_even = sizeof(pte_t) / 2;
int pte_off_odd = pte_off_even + sizeof(pte_t);
/* The pte entries are pre-shifted */
i_lw(p, tmp, pte_off_even, ptep); /* get even pte */
i_mtc0(p, tmp, C0_ENTRYLO0); /* load it */
i_lw(p, ptep, pte_off_odd, ptep); /* get odd pte */
i_mtc0(p, ptep, C0_ENTRYLO1); /* load it */
}
#else
i_LW(p, tmp, 0, ptep); /* get even pte */
i_LW(p, ptep, sizeof(pte_t), ptep); /* get odd pte */
if (r45k_bvahwbug())
build_tlb_probe_entry(p);
i_SRL(p, tmp, tmp, 6); /* convert to entrylo0 */
if (r4k_250MHZhwbug())
i_mtc0(p, 0, C0_ENTRYLO0);
i_mtc0(p, tmp, C0_ENTRYLO0); /* load it */
i_SRL(p, ptep, ptep, 6); /* convert to entrylo1 */
if (r45k_bvahwbug())
i_mfc0(p, tmp, C0_INDEX);
if (r4k_250MHZhwbug())
i_mtc0(p, 0, C0_ENTRYLO1);
i_mtc0(p, ptep, C0_ENTRYLO1); /* load it */
#endif
}
static void __init build_r4000_tlb_refill_handler(void)
{
u32 *p = tlb_handler;
struct label *l = labels;
struct reloc *r = relocs;
u32 *f;
unsigned int final_len;
memset(tlb_handler, 0, sizeof(tlb_handler));
memset(labels, 0, sizeof(labels));
memset(relocs, 0, sizeof(relocs));
memset(final_handler, 0, sizeof(final_handler));
/*
* create the plain linear handler
*/
if (bcm1250_m3_war()) {
i_MFC0(&p, K0, C0_BADVADDR);
i_MFC0(&p, K1, C0_ENTRYHI);
i_xor(&p, K0, K0, K1);
i_SRL(&p, K0, K0, PAGE_SHIFT + 1);
il_bnez(&p, &r, K0, label_leave);
/* No need for i_nop */
}
#ifdef CONFIG_64BIT
build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
#else
build_get_pgde32(&p, K0, K1); /* get pgd in K1 */
#endif
build_get_ptep(&p, K0, K1);
build_update_entries(&p, K0, K1);
build_tlb_write_entry(&p, &l, &r, tlb_random);
l_leave(&l, p);
i_eret(&p); /* return from trap */
#ifdef CONFIG_64BIT
build_get_pgd_vmalloc64(&p, &l, &r, K0, K1);
#endif
/*
* Overflow check: For the 64bit handler, we need at least one
* free instruction slot for the wrap-around branch. In worst
* case, if the intended insertion point is a delay slot, we
* need three, with the second nop'ed and the third being
* unused.
*/
/* Loongson2 ebase is different than r4k, we have more space */
#if defined(CONFIG_32BIT) || defined(CONFIG_CPU_LOONGSON2)
if ((p - tlb_handler) > 64)
panic("TLB refill handler space exceeded");
#else
if (((p - tlb_handler) > 63)
|| (((p - tlb_handler) > 61)
&& insn_has_bdelay(relocs, tlb_handler + 29)))
panic("TLB refill handler space exceeded");
#endif
/*
* Now fold the handler in the TLB refill handler space.
*/
#if defined(CONFIG_32BIT) || defined(CONFIG_CPU_LOONGSON2)
f = final_handler;
/* Simplest case, just copy the handler. */
copy_handler(relocs, labels, tlb_handler, p, f);
final_len = p - tlb_handler;
#else /* CONFIG_64BIT */
f = final_handler + 32;
if ((p - tlb_handler) <= 32) {
/* Just copy the handler. */
copy_handler(relocs, labels, tlb_handler, p, f);
final_len = p - tlb_handler;
} else {
u32 *split = tlb_handler + 30;
/*
* Find the split point.
*/
if (insn_has_bdelay(relocs, split - 1))
split--;
/* Copy first part of the handler. */
copy_handler(relocs, labels, tlb_handler, split, f);
f += split - tlb_handler;
/* Insert branch. */
l_split(&l, final_handler);
il_b(&f, &r, label_split);
if (insn_has_bdelay(relocs, split))
i_nop(&f);
else {
copy_handler(relocs, labels, split, split + 1, f);
move_labels(labels, f, f + 1, -1);
f++;
split++;
}
/* Copy the rest of the handler. */
copy_handler(relocs, labels, split, p, final_handler);
final_len = (f - (final_handler + 32)) + (p - split);
}
#endif /* CONFIG_64BIT */
resolve_relocs(relocs, labels);
pr_info("Synthesized TLB refill handler (%u instructions).\n",
final_len);
memcpy((void *)ebase, final_handler, 0x100);
dump_handler((u32 *)ebase, 64);
}
/*
* TLB load/store/modify handlers.
*
* Only the fastpath gets synthesized at runtime, the slowpath for
* do_page_fault remains normal asm.
*/
extern void tlb_do_page_fault_0(void);
extern void tlb_do_page_fault_1(void);
/*
* 128 instructions for the fastpath handler is generous and should
* never be exceeded.
*/
#define FASTPATH_SIZE 128
u32 handle_tlbl[FASTPATH_SIZE] __cacheline_aligned;
u32 handle_tlbs[FASTPATH_SIZE] __cacheline_aligned;
u32 handle_tlbm[FASTPATH_SIZE] __cacheline_aligned;
static void __init
iPTE_LW(u32 **p, struct label **l, unsigned int pte, unsigned int ptr)
{
#ifdef CONFIG_SMP
# ifdef CONFIG_64BIT_PHYS_ADDR
if (cpu_has_64bits)
i_lld(p, pte, 0, ptr);
else
# endif
i_LL(p, pte, 0, ptr);
#else
# ifdef CONFIG_64BIT_PHYS_ADDR
if (cpu_has_64bits)
i_ld(p, pte, 0, ptr);
else
# endif
i_LW(p, pte, 0, ptr);
#endif
}
static void __init
iPTE_SW(u32 **p, struct reloc **r, unsigned int pte, unsigned int ptr,
unsigned int mode)
{
#ifdef CONFIG_64BIT_PHYS_ADDR
unsigned int hwmode = mode & (_PAGE_VALID | _PAGE_DIRTY);
#endif
i_ori(p, pte, pte, mode);
#ifdef CONFIG_SMP
# ifdef CONFIG_64BIT_PHYS_ADDR
if (cpu_has_64bits)
i_scd(p, pte, 0, ptr);
else
# endif
i_SC(p, pte, 0, ptr);
if (r10000_llsc_war())
il_beqzl(p, r, pte, label_smp_pgtable_change);
else
il_beqz(p, r, pte, label_smp_pgtable_change);
# ifdef CONFIG_64BIT_PHYS_ADDR
if (!cpu_has_64bits) {
/* no i_nop needed */
i_ll(p, pte, sizeof(pte_t) / 2, ptr);
i_ori(p, pte, pte, hwmode);
i_sc(p, pte, sizeof(pte_t) / 2, ptr);
il_beqz(p, r, pte, label_smp_pgtable_change);
/* no i_nop needed */
i_lw(p, pte, 0, ptr);
} else
i_nop(p);
# else
i_nop(p);
# endif
#else
# ifdef CONFIG_64BIT_PHYS_ADDR
if (cpu_has_64bits)
i_sd(p, pte, 0, ptr);
else
# endif
i_SW(p, pte, 0, ptr);
# ifdef CONFIG_64BIT_PHYS_ADDR
if (!cpu_has_64bits) {
i_lw(p, pte, sizeof(pte_t) / 2, ptr);
i_ori(p, pte, pte, hwmode);
i_sw(p, pte, sizeof(pte_t) / 2, ptr);
i_lw(p, pte, 0, ptr);
}
# endif
#endif
}
/*
* Check if PTE is present, if not then jump to LABEL. PTR points to
* the page table where this PTE is located, PTE will be re-loaded
* with it's original value.
*/
static void __init
build_pte_present(u32 **p, struct label **l, struct reloc **r,
unsigned int pte, unsigned int ptr, enum label_id lid)
{
i_andi(p, pte, pte, _PAGE_PRESENT | _PAGE_READ);
i_xori(p, pte, pte, _PAGE_PRESENT | _PAGE_READ);
il_bnez(p, r, pte, lid);
iPTE_LW(p, l, pte, ptr);
}
/* Make PTE valid, store result in PTR. */
static void __init
build_make_valid(u32 **p, struct reloc **r, unsigned int pte,
unsigned int ptr)
{
unsigned int mode = _PAGE_VALID | _PAGE_ACCESSED;
iPTE_SW(p, r, pte, ptr, mode);
}
/*
* Check if PTE can be written to, if not branch to LABEL. Regardless
* restore PTE with value from PTR when done.
*/
static void __init
build_pte_writable(u32 **p, struct label **l, struct reloc **r,
unsigned int pte, unsigned int ptr, enum label_id lid)
{
i_andi(p, pte, pte, _PAGE_PRESENT | _PAGE_WRITE);
i_xori(p, pte, pte, _PAGE_PRESENT | _PAGE_WRITE);
il_bnez(p, r, pte, lid);
iPTE_LW(p, l, pte, ptr);
}
/* Make PTE writable, update software status bits as well, then store
* at PTR.
*/
static void __init
build_make_write(u32 **p, struct reloc **r, unsigned int pte,
unsigned int ptr)
{
unsigned int mode = (_PAGE_ACCESSED | _PAGE_MODIFIED | _PAGE_VALID
| _PAGE_DIRTY);
iPTE_SW(p, r, pte, ptr, mode);
}
/*
* Check if PTE can be modified, if not branch to LABEL. Regardless
* restore PTE with value from PTR when done.
*/
static void __init
build_pte_modifiable(u32 **p, struct label **l, struct reloc **r,
unsigned int pte, unsigned int ptr, enum label_id lid)
{
i_andi(p, pte, pte, _PAGE_WRITE);
il_beqz(p, r, pte, lid);
iPTE_LW(p, l, pte, ptr);
}
/*
* R3000 style TLB load/store/modify handlers.
*/
/*
* This places the pte into ENTRYLO0 and writes it with tlbwi.
* Then it returns.
*/
static void __init
build_r3000_pte_reload_tlbwi(u32 **p, unsigned int pte, unsigned int tmp)
{
i_mtc0(p, pte, C0_ENTRYLO0); /* cp0 delay */
i_mfc0(p, tmp, C0_EPC); /* cp0 delay */
i_tlbwi(p);
i_jr(p, tmp);
i_rfe(p); /* branch delay */
}
/*
* This places the pte into ENTRYLO0 and writes it with tlbwi
* or tlbwr as appropriate. This is because the index register
* may have the probe fail bit set as a result of a trap on a
* kseg2 access, i.e. without refill. Then it returns.
*/
static void __init
build_r3000_tlb_reload_write(u32 **p, struct label **l, struct reloc **r,
unsigned int pte, unsigned int tmp)
{
i_mfc0(p, tmp, C0_INDEX);
i_mtc0(p, pte, C0_ENTRYLO0); /* cp0 delay */
il_bltz(p, r, tmp, label_r3000_write_probe_fail); /* cp0 delay */
i_mfc0(p, tmp, C0_EPC); /* branch delay */
i_tlbwi(p); /* cp0 delay */
i_jr(p, tmp);
i_rfe(p); /* branch delay */
l_r3000_write_probe_fail(l, *p);
i_tlbwr(p); /* cp0 delay */
i_jr(p, tmp);
i_rfe(p); /* branch delay */
}
static void __init
build_r3000_tlbchange_handler_head(u32 **p, unsigned int pte,
unsigned int ptr)
{
long pgdc = (long)pgd_current;
i_mfc0(p, pte, C0_BADVADDR);
i_lui(p, ptr, rel_hi(pgdc)); /* cp0 delay */
i_lw(p, ptr, rel_lo(pgdc), ptr);
i_srl(p, pte, pte, 22); /* load delay */
i_sll(p, pte, pte, 2);
i_addu(p, ptr, ptr, pte);
i_mfc0(p, pte, C0_CONTEXT);
i_lw(p, ptr, 0, ptr); /* cp0 delay */
i_andi(p, pte, pte, 0xffc); /* load delay */
i_addu(p, ptr, ptr, pte);
i_lw(p, pte, 0, ptr);
i_tlbp(p); /* load delay */
}
static void __init build_r3000_tlb_load_handler(void)
{
u32 *p = handle_tlbl;
struct label *l = labels;
struct reloc *r = relocs;
memset(handle_tlbl, 0, sizeof(handle_tlbl));
memset(labels, 0, sizeof(labels));
memset(relocs, 0, sizeof(relocs));
build_r3000_tlbchange_handler_head(&p, K0, K1);
build_pte_present(&p, &l, &r, K0, K1, label_nopage_tlbl);
i_nop(&p); /* load delay */
build_make_valid(&p, &r, K0, K1);
build_r3000_tlb_reload_write(&p, &l, &r, K0, K1);
l_nopage_tlbl(&l, p);
i_j(&p, (unsigned long)tlb_do_page_fault_0 & 0x0fffffff);
i_nop(&p);
if ((p - handle_tlbl) > FASTPATH_SIZE)
panic("TLB load handler fastpath space exceeded");
resolve_relocs(relocs, labels);
pr_info("Synthesized TLB load handler fastpath (%u instructions).\n",
(unsigned int)(p - handle_tlbl));
dump_handler(handle_tlbl, ARRAY_SIZE(handle_tlbl));
}
static void __init build_r3000_tlb_store_handler(void)
{
u32 *p = handle_tlbs;
struct label *l = labels;
struct reloc *r = relocs;
memset(handle_tlbs, 0, sizeof(handle_tlbs));
memset(labels, 0, sizeof(labels));
memset(relocs, 0, sizeof(relocs));
build_r3000_tlbchange_handler_head(&p, K0, K1);
build_pte_writable(&p, &l, &r, K0, K1, label_nopage_tlbs);
i_nop(&p); /* load delay */
build_make_write(&p, &r, K0, K1);
build_r3000_tlb_reload_write(&p, &l, &r, K0, K1);
l_nopage_tlbs(&l, p);
i_j(&p, (unsigned long)tlb_do_page_fault_1 & 0x0fffffff);
i_nop(&p);
if ((p - handle_tlbs) > FASTPATH_SIZE)
panic("TLB store handler fastpath space exceeded");
resolve_relocs(relocs, labels);
pr_info("Synthesized TLB store handler fastpath (%u instructions).\n",
(unsigned int)(p - handle_tlbs));
dump_handler(handle_tlbs, ARRAY_SIZE(handle_tlbs));
}
static void __init build_r3000_tlb_modify_handler(void)
{
u32 *p = handle_tlbm;
struct label *l = labels;
struct reloc *r = relocs;
memset(handle_tlbm, 0, sizeof(handle_tlbm));
memset(labels, 0, sizeof(labels));
memset(relocs, 0, sizeof(relocs));
build_r3000_tlbchange_handler_head(&p, K0, K1);
build_pte_modifiable(&p, &l, &r, K0, K1, label_nopage_tlbm);
i_nop(&p); /* load delay */
build_make_write(&p, &r, K0, K1);
build_r3000_pte_reload_tlbwi(&p, K0, K1);
l_nopage_tlbm(&l, p);
i_j(&p, (unsigned long)tlb_do_page_fault_1 & 0x0fffffff);
i_nop(&p);
if ((p - handle_tlbm) > FASTPATH_SIZE)
panic("TLB modify handler fastpath space exceeded");
resolve_relocs(relocs, labels);
pr_info("Synthesized TLB modify handler fastpath (%u instructions).\n",
(unsigned int)(p - handle_tlbm));
dump_handler(handle_tlbm, ARRAY_SIZE(handle_tlbm));
}
/*
* R4000 style TLB load/store/modify handlers.
*/
static void __init
build_r4000_tlbchange_handler_head(u32 **p, struct label **l,
struct reloc **r, unsigned int pte,
unsigned int ptr)
{
#ifdef CONFIG_64BIT
build_get_pmde64(p, l, r, pte, ptr); /* get pmd in ptr */
#else
build_get_pgde32(p, pte, ptr); /* get pgd in ptr */
#endif
i_MFC0(p, pte, C0_BADVADDR);
i_LW(p, ptr, 0, ptr);
i_SRL(p, pte, pte, PAGE_SHIFT + PTE_ORDER - PTE_T_LOG2);
i_andi(p, pte, pte, (PTRS_PER_PTE - 1) << PTE_T_LOG2);
i_ADDU(p, ptr, ptr, pte);
#ifdef CONFIG_SMP
l_smp_pgtable_change(l, *p);
# endif
iPTE_LW(p, l, pte, ptr); /* get even pte */
if (!m4kc_tlbp_war())
build_tlb_probe_entry(p);
}
static void __init
build_r4000_tlbchange_handler_tail(u32 **p, struct label **l,
struct reloc **r, unsigned int tmp,
unsigned int ptr)
{
i_ori(p, ptr, ptr, sizeof(pte_t));
i_xori(p, ptr, ptr, sizeof(pte_t));
build_update_entries(p, tmp, ptr);
build_tlb_write_entry(p, l, r, tlb_indexed);
l_leave(l, *p);
i_eret(p); /* return from trap */
#ifdef CONFIG_64BIT
build_get_pgd_vmalloc64(p, l, r, tmp, ptr);
#endif
}
static void __init build_r4000_tlb_load_handler(void)
{
u32 *p = handle_tlbl;
struct label *l = labels;
struct reloc *r = relocs;
memset(handle_tlbl, 0, sizeof(handle_tlbl));
memset(labels, 0, sizeof(labels));
memset(relocs, 0, sizeof(relocs));
if (bcm1250_m3_war()) {
i_MFC0(&p, K0, C0_BADVADDR);
i_MFC0(&p, K1, C0_ENTRYHI);
i_xor(&p, K0, K0, K1);
i_SRL(&p, K0, K0, PAGE_SHIFT + 1);
il_bnez(&p, &r, K0, label_leave);
/* No need for i_nop */
}
build_r4000_tlbchange_handler_head(&p, &l, &r, K0, K1);
build_pte_present(&p, &l, &r, K0, K1, label_nopage_tlbl);
if (m4kc_tlbp_war())
build_tlb_probe_entry(&p);
build_make_valid(&p, &r, K0, K1);
build_r4000_tlbchange_handler_tail(&p, &l, &r, K0, K1);
l_nopage_tlbl(&l, p);
i_j(&p, (unsigned long)tlb_do_page_fault_0 & 0x0fffffff);
i_nop(&p);
if ((p - handle_tlbl) > FASTPATH_SIZE)
panic("TLB load handler fastpath space exceeded");
resolve_relocs(relocs, labels);
pr_info("Synthesized TLB load handler fastpath (%u instructions).\n",
(unsigned int)(p - handle_tlbl));
dump_handler(handle_tlbl, ARRAY_SIZE(handle_tlbl));
}
static void __init build_r4000_tlb_store_handler(void)
{
u32 *p = handle_tlbs;
struct label *l = labels;
struct reloc *r = relocs;
memset(handle_tlbs, 0, sizeof(handle_tlbs));
memset(labels, 0, sizeof(labels));
memset(relocs, 0, sizeof(relocs));
build_r4000_tlbchange_handler_head(&p, &l, &r, K0, K1);
build_pte_writable(&p, &l, &r, K0, K1, label_nopage_tlbs);
if (m4kc_tlbp_war())
build_tlb_probe_entry(&p);
build_make_write(&p, &r, K0, K1);
build_r4000_tlbchange_handler_tail(&p, &l, &r, K0, K1);
l_nopage_tlbs(&l, p);
i_j(&p, (unsigned long)tlb_do_page_fault_1 & 0x0fffffff);
i_nop(&p);
if ((p - handle_tlbs) > FASTPATH_SIZE)
panic("TLB store handler fastpath space exceeded");
resolve_relocs(relocs, labels);
pr_info("Synthesized TLB store handler fastpath (%u instructions).\n",
(unsigned int)(p - handle_tlbs));
dump_handler(handle_tlbs, ARRAY_SIZE(handle_tlbs));
}
static void __init build_r4000_tlb_modify_handler(void)
{
u32 *p = handle_tlbm;
struct label *l = labels;
struct reloc *r = relocs;
memset(handle_tlbm, 0, sizeof(handle_tlbm));
memset(labels, 0, sizeof(labels));
memset(relocs, 0, sizeof(relocs));
build_r4000_tlbchange_handler_head(&p, &l, &r, K0, K1);
build_pte_modifiable(&p, &l, &r, K0, K1, label_nopage_tlbm);
if (m4kc_tlbp_war())
build_tlb_probe_entry(&p);
/* Present and writable bits set, set accessed and dirty bits. */
build_make_write(&p, &r, K0, K1);
build_r4000_tlbchange_handler_tail(&p, &l, &r, K0, K1);
l_nopage_tlbm(&l, p);
i_j(&p, (unsigned long)tlb_do_page_fault_1 & 0x0fffffff);
i_nop(&p);
if ((p - handle_tlbm) > FASTPATH_SIZE)
panic("TLB modify handler fastpath space exceeded");
resolve_relocs(relocs, labels);
pr_info("Synthesized TLB modify handler fastpath (%u instructions).\n",
(unsigned int)(p - handle_tlbm));
dump_handler(handle_tlbm, ARRAY_SIZE(handle_tlbm));
}
void __init build_tlb_refill_handler(void)
{
/*
* The refill handler is generated per-CPU, multi-node systems
* may have local storage for it. The other handlers are only
* needed once.
*/
static int run_once = 0;
switch (current_cpu_type()) {
case CPU_R2000:
case CPU_R3000:
case CPU_R3000A:
case CPU_R3081E:
case CPU_TX3912:
case CPU_TX3922:
case CPU_TX3927:
build_r3000_tlb_refill_handler();
if (!run_once) {
build_r3000_tlb_load_handler();
build_r3000_tlb_store_handler();
build_r3000_tlb_modify_handler();
run_once++;
}
break;
case CPU_R6000:
case CPU_R6000A:
panic("No R6000 TLB refill handler yet");
break;
case CPU_R8000:
panic("No R8000 TLB refill handler yet");
break;
default:
build_r4000_tlb_refill_handler();
if (!run_once) {
build_r4000_tlb_load_handler();
build_r4000_tlb_store_handler();
build_r4000_tlb_modify_handler();
run_once++;
}
}
}
void __init flush_tlb_handlers(void)
{
flush_icache_range((unsigned long)handle_tlbl,
(unsigned long)handle_tlbl + sizeof(handle_tlbl));
flush_icache_range((unsigned long)handle_tlbs,
(unsigned long)handle_tlbs + sizeof(handle_tlbs));
flush_icache_range((unsigned long)handle_tlbm,
(unsigned long)handle_tlbm + sizeof(handle_tlbm));
}