leandrof/linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
94e8100678
linux/drivers/net/ethernet/intel/ice/ice_repr.h

33 lines
860 B
C
Raw Normal View History

ice: introduce VF port representor Port representor is used to manage VF from host side. To allow it each created representor registers netdevice with random hw address. Also devlink port is created for all representors. Port representor name is created based on switch id or managed by devlink core if devlink port was registered with success. Open and stop ndo ops are implemented to allow managing the VF link state. Link state is tracked in VF struct. Struct ice_netdev_priv is extended by pointer to representor field. This is needed to get correct representor from netdev struct mostly used in ndo calls. Implement helper functions to check if given netdev is netdev of port representor (ice_is_port_repr_netdev) and to get representor from netdev (ice_netdev_to_repr). As driver mostly will create or destroy port representors on all VFs instead of on single one, write functions to add and remove representor for each VF. Representor struct contains pointer to source VSI, which is VSI configured on VF, backpointer to VF, backpointer to netdev, q_vector pointer and metadata_dst which will be used in data path. Co-developed-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-08-20 00:08:50 +00:00
/* SPDX-License-Identifier: GPL-2.0 */
/* Copyright (C) 2019-2021, Intel Corporation. */
#ifndef _ICE_REPR_H_
#define _ICE_REPR_H_
#include <net/dst_metadata.h>
struct ice_repr {
struct ice_vsi *src_vsi;
struct ice_vf *vf;
struct ice_q_vector *q_vector;
struct net_device *netdev;
struct metadata_dst *dst;
ice: improve switchdev's slow-path In current switchdev implementation, every VF PR is assigned to individual ring on switchdev ctrl VSI. For slow-path traffic, there is a mapping VF->ring done in software based on src_vsi value (by calling ice_eswitch_get_target_netdev function). With this change, HW solution is introduced which is more efficient. For each VF, src MAC (VF's MAC) filter will be created, which forwards packets to the corresponding switchdev ctrl VSI queue based on src MAC address. This filter has to be removed and then replayed in case of resetting one VF. Keep information about this rule in repr->mac_rule, thanks to that we know which rule has to be removed and replayed for a given VF. In case of CORE/GLOBAL all rules are removed automatically. We have to take care of readding them. This is done by ice_replay_vsi_adv_rule. When driver leaves switchdev mode, remove all advanced rules from switchdev ctrl VSI. This is done by ice_rem_adv_rule_for_vsi. Flag repr->rule_added is needed because in some cases reset might be triggered before VF sends request to add MAC. Co-developed-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-26 10:38:40 +00:00
#ifdef CONFIG_ICE_SWITCHDEV
/* info about slow path MAC rule */
struct ice_rule_query_data *mac_rule;
u8 rule_added;
#endif
ice: introduce VF port representor Port representor is used to manage VF from host side. To allow it each created representor registers netdevice with random hw address. Also devlink port is created for all representors. Port representor name is created based on switch id or managed by devlink core if devlink port was registered with success. Open and stop ndo ops are implemented to allow managing the VF link state. Link state is tracked in VF struct. Struct ice_netdev_priv is extended by pointer to representor field. This is needed to get correct representor from netdev struct mostly used in ndo calls. Implement helper functions to check if given netdev is netdev of port representor (ice_is_port_repr_netdev) and to get representor from netdev (ice_netdev_to_repr). As driver mostly will create or destroy port representors on all VFs instead of on single one, write functions to add and remove representor for each VF. Representor struct contains pointer to source VSI, which is VSI configured on VF, backpointer to VF, backpointer to netdev, q_vector pointer and metadata_dst which will be used in data path. Co-developed-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-08-20 00:08:50 +00:00
};
int ice_repr_add_for_all_vfs(struct ice_pf *pf);
void ice_repr_rem_from_all_vfs(struct ice_pf *pf);
ice: rebuild switchdev when resetting all VFs As resetting all VFs behaves mostly like creating new VFs also eswitch infrastructure has to be recreated. The easiest way to do that is to rebuild eswitch after resetting VFs. Implement helper functions to start and stop all representors queues. This is used to disable traffic on port representors. In rebuild path: - NAPI has to be disabled - eswitch environment has to be set up - new port representors have to be created, because the old one had pointer to not existing VFs - new control plane VSI ring should be remapped - NAPI hast to be enabled - rxdid has to be set to FLEX_NIC_2, because this descriptor id support source_vsi, which is needed on control plane VSI queues - port representors queues have to be started Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-08-20 00:08:57 +00:00
void ice_repr_start_tx_queues(struct ice_repr *repr);
void ice_repr_stop_tx_queues(struct ice_repr *repr);
ice: set and release switchdev environment Switchdev environment has to be set up when user create VFs and eswitch mode is switchdev. Release is done when user delete all VFs. Data path in this implementation is based on control plane VSI. This VSI is used to pass traffic from port representors to corresponding VFs and vice versa. Default TX rule has to be added to forward packet to control plane VSI. This will redirect packets from VFs which don't match other rules to control plane VSI. On RX side default rule is added on uplink VSI to receive all traffic that doesn't match other rules. When setting switchdev environment all other rules from VFs should be removed. Packet to VFs will be forwarded by control plane VSI. As VF without any mac rules can't send any packet because of antispoof mechanism, VSI antispoof should be turned off on each VFs. To send packet from representor to correct VSI, destination VSI field in TX descriptor will have to be filled. Allow that by setting destination override bit in control plane VSI security config. Packet from VFs will be received on control plane VSI. Driver should decide to which netdev forward the packet. Decision is made based on src_vsi field from descriptor. There is a target netdev list in control plane VSI struct which choose netdev based on src_vsi number. Co-developed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-08-20 00:08:54 +00:00
void ice_repr_set_traffic_vsi(struct ice_repr *repr, struct ice_vsi *vsi);
ice: introduce VF port representor Port representor is used to manage VF from host side. To allow it each created representor registers netdevice with random hw address. Also devlink port is created for all representors. Port representor name is created based on switch id or managed by devlink core if devlink port was registered with success. Open and stop ndo ops are implemented to allow managing the VF link state. Link state is tracked in VF struct. Struct ice_netdev_priv is extended by pointer to representor field. This is needed to get correct representor from netdev struct mostly used in ndo calls. Implement helper functions to check if given netdev is netdev of port representor (ice_is_port_repr_netdev) and to get representor from netdev (ice_netdev_to_repr). As driver mostly will create or destroy port representors on all VFs instead of on single one, write functions to add and remove representor for each VF. Representor struct contains pointer to source VSI, which is VSI configured on VF, backpointer to VF, backpointer to netdev, q_vector pointer and metadata_dst which will be used in data path. Co-developed-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-08-20 00:08:50 +00:00
struct ice_repr *ice_netdev_to_repr(struct net_device *netdev);
bool ice_is_port_repr_netdev(struct net_device *netdev);
#endif
Reference in New Issue Copy Permalink